Skip to contentSkip to conversation

dt-bindings: net/dsa: Add spi-peripheral-props.yaml references

PATCH Superseded Rob Herring 1 participant 2 messages May 31, 2022

Subsystems (7)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Rob Herring

author maintainer
#0 lore raw

PATCH v2 1/1 dt-bindings: net/dsa: Add spi-peripheral-props.yaml references

SPI peripheral device bindings need to reference spi-peripheral-props.yaml in order to use various SPI controller specific properties. Otherwise, the unevaluatedProperties check will reject any controller specific properties.

---
v2:
- Also add references in nxp,sja1105.yaml and brcm,b53.yaml as pointed out by Vladimir Oltean

---
 .../devicetree/bindings/net/dsa/brcm,b53.yaml | 112 ++++++++++--------
 .../bindings/net/dsa/microchip,ksz.yaml       |   1 +
 .../bindings/net/dsa/nxp,sja1105.yaml         |   1 +
 .../devicetree/bindings/net/dsa/realtek.yaml  |   1 +
 4 files changed, 68 insertions(+), 47 deletions(-)
Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml +65 -47
index c3c938893ad9..09814288c685 100644
@@ -68,53 +68,71 @@ required:
   - compatible
   - reg
 
-# BCM585xx/586xx/88312 SoCs
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - brcm,bcm58522-srab
-          - brcm,bcm58523-srab
-          - brcm,bcm58525-srab
-          - brcm,bcm58622-srab
-          - brcm,bcm58623-srab
-          - brcm,bcm58625-srab
-          - brcm,bcm88312-srab
-then:
-  properties:
-    reg:
-      minItems: 3
-      maxItems: 3
-    reg-names:
-      items:
-        - const: srab
-        - const: mux_config
-        - const: sgmii_config
-    interrupts:
-      minItems: 13
-      maxItems: 13
-    interrupt-names:
-      items:
-        - const: link_state_p0
-        - const: link_state_p1
-        - const: link_state_p2
-        - const: link_state_p3
-        - const: link_state_p4
-        - const: link_state_p5
-        - const: link_state_p7
-        - const: link_state_p8
-        - const: phy
-        - const: ts
-        - const: imp_sleep_timer_p5
-        - const: imp_sleep_timer_p7
-        - const: imp_sleep_timer_p8
-  required:
-    - interrupts
-else:
-  properties:
-    reg:
-      maxItems: 1
+allOf:
+  - $ref: dsa.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm5325
+              - brcm,bcm53115
+              - brcm,bcm53125
+              - brcm,bcm53128
+              - brcm,bcm5365
+              - brcm,bcm5395
+              - brcm,bcm5397
+              - brcm,bcm5398
+    then:
+      $ref: /schemas/spi/spi-peripheral-props.yaml
+
+    # BCM585xx/586xx/88312 SoCs
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm58522-srab
+              - brcm,bcm58523-srab
+              - brcm,bcm58525-srab
+              - brcm,bcm58622-srab
+              - brcm,bcm58623-srab
+              - brcm,bcm58625-srab
+              - brcm,bcm88312-srab
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+        reg-names:
+          items:
+            - const: srab
+            - const: mux_config
+            - const: sgmii_config
+        interrupts:
+          minItems: 13
+          maxItems: 13
+        interrupt-names:
+          items:
+            - const: link_state_p0
+            - const: link_state_p1
+            - const: link_state_p2
+            - const: link_state_p3
+            - const: link_state_p4
+            - const: link_state_p5
+            - const: link_state_p7
+            - const: link_state_p8
+            - const: phy
+            - const: ts
+            - const: imp_sleep_timer_p5
+            - const: imp_sleep_timer_p7
+            - const: imp_sleep_timer_p8
+      required:
+        - interrupts
+    else:
+      properties:
+        reg:
+          maxItems: 1
 
 unevaluatedProperties: false
 
Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +1 -0
index 184152087b60..6bbd8145b6c1 100644
@@ -12,6 +12,7 @@ maintainers:
 
 allOf:
   - $ref: dsa.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml +1 -0
index 1ea0bd490473..1e26d876d146 100644
@@ -14,6 +14,7 @@ description:
 
 allOf:
   - $ref: "dsa.yaml#"
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 maintainers:
   - Vladimir Oltean <[email protected]>
Documentation/devicetree/bindings/net/dsa/realtek.yaml +1 -0
index 99ee4b5b9346..4f99aff029dc 100644
@@ -108,6 +108,7 @@ if:
     - reg
 
 then:
+  $ref: /schemas/spi/spi-peripheral-props.yaml#
   not:
     required:
       - mdc-gpios
Signature · 1 line
2.34.1
author maintainer
#1 lore raw
Quoted 11 lines · Rob Herring

SPI peripheral device bindings need to reference spi-peripheral-props.yaml in order to use various SPI controller specific properties. Otherwise, the unevaluatedProperties check will reject any controller specific properties.

---
v2:
- Also add references in nxp,sja1105.yaml and brcm,b53.yaml as pointed out by Vladimir Oltean

Sigh, a bit too quick on this one. v3 coming.

Rob