Skip to contentSkip to conversation

iio: adc: nau7802: Convert driver to use ->probe_new()

PATCH In review Andy Shevchenko 2 participants 3 messages May 31, 2022 – Jun 3, 2022 IIO

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 iio: adc: nau7802: Convert driver to use ->probe_new()

Use the ->probe_new() callback.

The driver does not use const struct i2c_device_id * argument, so convert it to utilise the simplified I²C driver registration.

---
 drivers/iio/adc/nau7802.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)
drivers/iio/adc/nau7802.c +2 -8
index 976c235f3079..2d71cdbcd82f 100644
@@ -407,8 +407,7 @@ static const struct iio_info nau7802_info = {
 	.attrs = &nau7802_attribute_group,
 };
 
-static int nau7802_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int nau7802_probe(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev;
 	struct nau7802_state *st;
@@ -417,11 +416,6 @@ static int nau7802_probe(struct i2c_client *client,
 	u8 data;
 	u32 tmp = 0;
 
-	if (!client->dev.of_node) {
-		dev_err(&client->dev, "No device tree node available.\n");
-		return -EINVAL;
-	}
-
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
@@ -550,7 +544,7 @@ static const struct of_device_id nau7802_dt_ids[] = {
 MODULE_DEVICE_TABLE(of, nau7802_dt_ids);
 
 static struct i2c_driver nau7802_driver = {
-	.probe = nau7802_probe,
+	.probe_new = nau7802_probe,
 	.id_table = nau7802_i2c_id,
 	.driver = {
 		   .name = "nau7802",
Signature · 1 line
2.35.1
#1 lore raw

PATCH 2/2 iio: adc: nau7802: Make use of device properties

Convert the module to be property provider agnostic and allow it to be used on non-OF platforms.

Add mod_devicetable.h include.

---
 drivers/iio/adc/nau7802.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/iio/adc/nau7802.c +3 -3
index 2d71cdbcd82f..c1261ecd400c 100644
@@ -8,10 +8,11 @@
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
+#include <linux/property.h>
 #include <linux/wait.h>
 #include <linux/log2.h>
-#include <linux/of.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -411,7 +412,6 @@ static int nau7802_probe(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev;
 	struct nau7802_state *st;
-	struct device_node *np = client->dev.of_node;
 	int i, ret;
 	u8 data;
 	u32 tmp = 0;
@@ -451,7 +451,7 @@ static int nau7802_probe(struct i2c_client *client)
 	if (!(ret & NAU7802_PUCTRL_PUR_BIT))
 		return ret;
 
-	of_property_read_u32(np, "nuvoton,vldo", &tmp);
+	device_property_read_u32(&client->dev, "nuvoton,vldo", &tmp);
 	st->vref_mv = tmp;
 
 	data = NAU7802_PUCTRL_PUD_BIT | NAU7802_PUCTRL_PUA_BIT |
Signature · 1 line
2.35.1
maintainer
#2 lore raw
In reply to Andy Shevchenko
Quoted 6 lines · On Wed, 1 Jun 2022 00:39:21 +0300 Andy Shevchenko…

Use the ->probe_new() callback.

The driver does not use const struct i2c_device_id * argument, so convert it to utilise the simplified I²C driver registration.

Series applied,

Thanks for all these cleanups btw.

Jonathan

Quoted 39 lines
---
 drivers/iio/adc/nau7802.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)
drivers/iio/adc/nau7802.c +2 -8
index 976c235f3079..2d71cdbcd82f 100644
@@ -407,8 +407,7 @@ static const struct iio_info nau7802_info = {
 	.attrs = &nau7802_attribute_group,
 };
 
-static int nau7802_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int nau7802_probe(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev;
 	struct nau7802_state *st;
@@ -417,11 +416,6 @@ static int nau7802_probe(struct i2c_client *client,
 	u8 data;
 	u32 tmp = 0;
 
-	if (!client->dev.of_node) {
-		dev_err(&client->dev, "No device tree node available.\n");
-		return -EINVAL;
-	}
-
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
@@ -550,7 +544,7 @@ static const struct of_device_id nau7802_dt_ids[] = {
 MODULE_DEVICE_TABLE(of, nau7802_dt_ids);
 
 static struct i2c_driver nau7802_driver = {
-	.probe = nau7802_probe,
+	.probe_new = nau7802_probe,
 	.id_table = nau7802_i2c_id,
 	.driver = {
 		   .name = "nau7802",