Skip to contentSkip to conversation

x86/setup: Move duplicate variable definition out of the if/else block

PATCH Applied Yuntao Wang 2 participants 2 messages Jun 1, 2022 – Jan 11, 2023 x86

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 x86/setup: Move duplicate variable definition out of the if/else block

Both the if and else blocks define an exact same boot_cpu_data variable, move the duplicate variable definition out of the if/else block.

In addition, this patch also does some other minor cleanups.

---
 arch/x86/kernel/e820.c  |  4 ++--
 arch/x86/kernel/setup.c | 10 ++--------
 2 files changed, 4 insertions(+), 10 deletions(-)
arch/x86/kernel/e820.c +2 -2
index f267205f2d5a..06ece49ac812 100644
@@ -395,7 +395,7 @@ int __init e820__update_table(struct e820_table *table)
 
 		/* Continue building up new map based on this information: */
 		if (current_type != last_type || e820_nomerge(current_type)) {
-			if (last_type != 0)	 {
+			if (last_type != 0) {
 				new_entries[new_nr_entries].size = change_point[chg_idx]->addr - last_addr;
 				/* Move forward only if the new size was non-zero: */
 				if (new_entries[new_nr_entries].size != 0)
@@ -403,7 +403,7 @@ int __init e820__update_table(struct e820_table *table)
 					if (++new_nr_entries >= max_nr_entries)
 						break;
 			}
-			if (current_type != 0)	{
+			if (current_type != 0) {
 				new_entries[new_nr_entries].addr = change_point[chg_idx]->addr;
 				new_entries[new_nr_entries].type = current_type;
 				last_addr = change_point[chg_idx]->addr;
arch/x86/kernel/setup.c +2 -8
index c95b9ac5a457..bb3451d3e548 100644
@@ -115,11 +115,6 @@ static struct resource bss_resource = {
 #ifdef CONFIG_X86_32
 /* CPU data as detected by the assembly code in head_32.S */
 struct cpuinfo_x86 new_cpu_data;
-
-/* Common CPU data for all CPUs */
-struct cpuinfo_x86 boot_cpu_data __read_mostly;
-EXPORT_SYMBOL(boot_cpu_data);
-
 unsigned int def_to_bigsmp;
 
 struct apm_info apm_info;
@@ -133,11 +128,10 @@ EXPORT_SYMBOL(ist_info);
 struct ist_info ist_info;
 #endif
 
-#else
-struct cpuinfo_x86 boot_cpu_data __read_mostly;
-EXPORT_SYMBOL(boot_cpu_data);
 #endif
 
+struct cpuinfo_x86 boot_cpu_data __read_mostly;
+EXPORT_SYMBOL(boot_cpu_data);
 
 #if !defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
 __visible unsigned long mmu_cr4_features __ro_after_init;
Signature · 1 line
2.36.0
merge bot Applied
#1 lore raw

[tip: x86/cleanups] x86/setup: Move duplicate boot_cpu_data definition out of the ifdeffery

The following commit has been merged into the x86/cleanups branch of tip:

The following commit has been merged into the x86/cleanups branch of tip:

Commit-ID:     50c66d7b049ddec095644a005bfe0b28e22c4b02
Gitweb:        https://git.kernel.org/tip/50c66d7b049ddec095644a005bfe0b28e22c4b02
Author:        Yuntao Wang <[email protected]>
AuthorDate:    Wed, 01 Jun 2022 20:29:14 +08:00
Committer:     Borislav Petkov (AMD) <[email protected]>
CommitterDate: Wed, 11 Jan 2023 12:45:16 +01:00

x86/setup: Move duplicate boot_cpu_data definition out of the ifdeffery

Both the if and else blocks define an exact same boot_cpu_data variable, move the duplicate variable definition out of the if/else block.

In addition, do some other minor cleanups.

[ bp: Massage. ]

---
 arch/x86/kernel/e820.c  |  4 ++--
 arch/x86/kernel/setup.c | 10 ++--------
 2 files changed, 4 insertions(+), 10 deletions(-)
arch/x86/kernel/e820.c +2 -2
index 0614a79..fb8cf95 100644
@@ -395,7 +395,7 @@ int __init e820__update_table(struct e820_table *table)
 
 		/* Continue building up new map based on this information: */
 		if (current_type != last_type || e820_nomerge(current_type)) {
-			if (last_type != 0)	 {
+			if (last_type) {
 				new_entries[new_nr_entries].size = change_point[chg_idx]->addr - last_addr;
 				/* Move forward only if the new size was non-zero: */
 				if (new_entries[new_nr_entries].size != 0)
@@ -403,7 +403,7 @@ int __init e820__update_table(struct e820_table *table)
 					if (++new_nr_entries >= max_nr_entries)
 						break;
 			}
-			if (current_type != 0)	{
+			if (current_type) {
 				new_entries[new_nr_entries].addr = change_point[chg_idx]->addr;
 				new_entries[new_nr_entries].type = current_type;
 				last_addr = change_point[chg_idx]->addr;
arch/x86/kernel/setup.c +2 -8
index 8818854..16babff 100644
@@ -114,11 +114,6 @@ static struct resource bss_resource = {
 #ifdef CONFIG_X86_32
 /* CPU data as detected by the assembly code in head_32.S */
 struct cpuinfo_x86 new_cpu_data;
-
-/* Common CPU data for all CPUs */
-struct cpuinfo_x86 boot_cpu_data __read_mostly;
-EXPORT_SYMBOL(boot_cpu_data);
-
 unsigned int def_to_bigsmp;
 
 struct apm_info apm_info;
@@ -132,11 +127,10 @@ EXPORT_SYMBOL(ist_info);
 struct ist_info ist_info;
 #endif
 
-#else
-struct cpuinfo_x86 boot_cpu_data __read_mostly;
-EXPORT_SYMBOL(boot_cpu_data);
 #endif
 
+struct cpuinfo_x86 boot_cpu_data __read_mostly;
+EXPORT_SYMBOL(boot_cpu_data);
 
 #if !defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
 __visible unsigned long mmu_cr4_features __ro_after_init;