Skip to contentSkip to conversation

hw/cxl: Move CXL emulation options and state to machines.

PATCH Superseded Jonathan Cameron 3 participants 13 messages Jun 1, 2022 – Jun 8, 2022 Arm/Amlogic Meson SoC support

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover hw/cxl: Move CXL emulation options and state to machines.

Changes since v1 (thanks to Paolo Bonzini)
* Update 'description' of cxl-fmw as suggested to mention it's an array.
* Add a wrapper cxl_hook_up_pxb_registers() to cxl-host.c as it'll be common for all machines using CXL with PXB.

Run through the CI at:
https://gitlab.com/jic23/qemu/-/pipelines/553257456

V1 Cover letter:

Currently only machine with CXL support upstream is i386/pc but arm/virt patches have been posted and once this is merged an updated series will follow. Switch support is queued behind this as well because they both include documentation updates.

Paolo Bonzini highlighted a couple of issues with the current CXL emulation code.

* Top level parameter rather than machine for fixed memory windows

The --cxl-fixed-memory-window top level command line parameters won't play well with efforts to make it possible to instantiate entire machines via RPC. Better to move these to be machine configuration. This change is relatively straight forward, but does result in very long command lines (cannot break fixed window setup into multiple -M entries).

* Move all CXL stuff to machine specific code and helpers

To simplify the various interactions between machine setup and host bridges etc, currently various CXL steps are called from the generic core/machine.c and softmmu/vl.c + there are CXL elements in MachineState.

Much of this is straight forward to do with one exception:
The CXL pci_expander_bridge host bridges require MMIO register space. This series does this by walking the bus and filling the register space in via the machine_done callback. This is similar to the walk done for identifying host bridges in the ACPI building code but it is rather ugly and postpones rejection of PXB_CXL instances where cxl=off (default).

All comments welcome, but the first patch at least changes the command-line so to avoid have to add backwards compatibility code, it would be great to merge that before 7.1 is released.

Thanks,

Jonathan

Jonathan Cameron (8):
hw/cxl: Make the CXL fixed memory window setup a machine parameter. hw/acpi/cxl: Pass in the CXLState directly rather than MachineState hw/cxl: Push linking of CXL targets into i386/pc rather than in
machine.c
tests/acpi: Allow modification of q35 CXL CEDT table. pci/pci_expander_bridge: For CXL HB delay the HB register memory
region setup.
tests/acpi: Update q35/CEDT.cxl for new memory addresses. hw/cxl: Move the CXLState from MachineState to machine type specific
state.
hw/machine: Drop cxl_supported flag as no longer useful

 docs/system/devices/cxl.rst                 |   4 +-
 hw/acpi/cxl.c                               |   9 +-
 hw/core/machine.c                           |  28 ------
 hw/cxl/cxl-host-stubs.c                     |   9 +-
 hw/cxl/cxl-host.c                           | 100 ++++++++++++++++++--
 hw/i386/acpi-build.c                        |   8 +-
 hw/i386/pc.c                                |  31 +++---
 hw/pci-bridge/meson.build                   |   5 +-
 hw/pci-bridge/pci_expander_bridge.c         |  32 ++++---
 hw/pci-bridge/pci_expander_bridge_stubs.c   |  14 +++
 include/hw/acpi/cxl.h                       |   5 +-
 include/hw/boards.h                         |   3 +-
 include/hw/cxl/cxl.h                        |   9 +-
 include/hw/cxl/cxl_host.h                   |  23 +++++
 include/hw/i386/pc.h                        |   2 +
 include/hw/pci-bridge/pci_expander_bridge.h |  12 +++
 qapi/machine.json                           |  13 +++
 softmmu/vl.c                                |  46 ---------
 tests/data/acpi/q35/CEDT.cxl                | Bin 184 -> 184 bytes
 tests/qtest/bios-tables-test.c              |   4 +-
 tests/qtest/cxl-test.c                      |   4 +-
 21 files changed, 222 insertions(+), 139 deletions(-)
 create mode 100644 hw/pci-bridge/pci_expander_bridge_stubs.c
 create mode 100644 include/hw/cxl/cxl_host.h
 create mode 100644 include/hw/pci-bridge/pci_expander_bridge.h
Signature · 1 line
2.32.0
#1 lore raw

PATCH v2 1/8 hw/cxl: Make the CXL fixed memory window setup a machine parameter.

Paolo Bonzini requested this change to simplify the ongoing effort to allow machine setup entirely via RPC.

Includes shortening the command line form cxl-fixed-memory-window to cxl-fmw as the command lines are extremely long even with this change.

The json change is needed to ensure that there is a CXLFixedMemoryWindowOptionsList even though the actual element in the json is never used. Similar to existing SgxEpcProperties.

Update cxl-test and bios-tables-test to reflect new parameters.

---
 docs/system/devices/cxl.rst         |  4 +-
 hw/core/machine.c                   | 22 ---------
 hw/cxl/cxl-host-stubs.c             |  6 +--
 hw/cxl/cxl-host.c                   | 72 +++++++++++++++++++++++++++--
 hw/i386/pc.c                        |  3 ++
 hw/pci-bridge/pci_expander_bridge.c |  2 +-
 include/hw/boards.h                 |  1 +
 include/hw/cxl/cxl.h                |  7 +--
 include/hw/cxl/cxl_host.h           | 21 +++++++++
 qapi/machine.json                   | 13 ++++++
 softmmu/vl.c                        | 44 ------------------
 tests/qtest/bios-tables-test.c      |  4 +-
 tests/qtest/cxl-test.c              |  4 +-
 13 files changed, 116 insertions(+), 87 deletions(-)
docs/system/devices/cxl.rst +2 -2
index 9293cbf01a..bcbfe8c490 100644
@@ -251,7 +251,7 @@ A very simple setup with just one directly attached CXL Type 3 device::
   -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
   -device cxl-rp,port=0,bus=cxl.1,id=root_port13,chassis=0,slot=2 \
   -device cxl-type3,bus=root_port13,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem0 \
-  -cxl-fixed-memory-window targets.0=cxl.1,size=4G
+  -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G
 
 A setup suitable for 4 way interleave. Only one fixed window provided, to enable 2 way
 interleave across 2 CXL host bridges.  Each host bridge has 2 CXL Root Ports, with
@@ -277,7 +277,7 @@ the CXL Type3 device directly attached (no switches).::
   -device cxl-type3,bus=root_port15,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem2 \
   -device cxl-rp,port=1,bus=cxl.2,id=root_port16,chassis=0,slot=6 \
   -device cxl-type3,bus=root_port16,memdev=cxl-mem4,lsa=cxl-lsa4,id=cxl-pmem3 \
-  -cxl-fixed-memory-window targets.0=cxl.1,targets.1=cxl.2,size=4G,interleave-granularity=8k
+  -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.targets.1=cxl.2,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=8k
 
 Kernel Configuration Options
 ----------------------------
hw/core/machine.c +0 -22
index bb0dc8f6a9..87787b5604 100644
@@ -628,20 +628,6 @@ static void machine_set_nvdimm_persistence(Object *obj, const char *value,
     nvdimms_state->persistence_string = g_strdup(value);
 }
 
-static bool machine_get_cxl(Object *obj, Error **errp)
-{
-    MachineState *ms = MACHINE(obj);
-
-    return ms->cxl_devices_state->is_enabled;
-}
-
-static void machine_set_cxl(Object *obj, bool value, Error **errp)
-{
-    MachineState *ms = MACHINE(obj);
-
-    ms->cxl_devices_state->is_enabled = value;
-}
-
 void machine_class_allow_dynamic_sysbus_dev(MachineClass *mc, const char *type)
 {
     QAPI_LIST_PREPEND(mc->allowed_dynamic_sysbus_devices, g_strdup(type));
@@ -928,8 +914,6 @@ static void machine_class_init(ObjectClass *oc, void *data)
     mc->default_ram_size = 128 * MiB;
     mc->rom_file_has_mr = true;
 
-    /* Few machines support CXL, so default to off */
-    mc->cxl_supported = false;
     /* numa node memory size aligned on 8MB by default.
      * On Linux, each node's border has to be 8MB aligned
      */
@@ -1091,13 +1075,7 @@ static void machine_initfn(Object *obj)
     }
 
     if (mc->cxl_supported) {
-        Object *obj = OBJECT(ms);
-
         ms->cxl_devices_state = g_new0(CXLState, 1);
-        object_property_add_bool(obj, "cxl", machine_get_cxl, machine_set_cxl);
-        object_property_set_description(obj, "cxl",
-                                        "Set on/off to enable/disable "
-                                        "CXL instantiation");
     }
 
     if (mc->cpu_index_to_instance_props && mc->get_default_cpu_node_id) {
hw/cxl/cxl-host-stubs.c +2 -4
index 24465a52ab..de3e8894d5 100644
@@ -6,11 +6,9 @@
 #include "qemu/osdep.h"
 #include "qapi/error.h"
 #include "hw/cxl/cxl.h"
-
-void cxl_fixed_memory_window_config(MachineState *ms,
-                                    CXLFixedMemoryWindowOptions *object,
-                                    Error **errp) {};
+#include "hw/cxl/cxl_host.h"
 
 void cxl_fixed_memory_window_link_targets(Error **errp) {};
+void cxl_machine_init(Object *obj, CXLState *state) {};
 
 const MemoryRegionOps cfmws_ops;
hw/cxl/cxl-host.c +67 -5

92 lines not on this page · raw message

hw/i386/pc.c +3 -0
index 7c39c91335..98e63347f2 100644
@@ -76,6 +76,7 @@
 #include "hw/mem/pc-dimm.h"
 #include "hw/mem/nvdimm.h"
 #include "hw/cxl/cxl.h"
+#include "hw/cxl/cxl_host.h"
 #include "qapi/error.h"
 #include "qapi/qapi-visit-common.h"
 #include "qapi/qapi-visit-machine.h"
@@ -1682,6 +1683,7 @@ static void pc_machine_set_max_fw_size(Object *obj, Visitor *v,
 static void pc_machine_initfn(Object *obj)
 {
     PCMachineState *pcms = PC_MACHINE(obj);
+    MachineState *ms = MACHINE(obj);
 
 #ifdef CONFIG_VMPORT
     pcms->vmport = ON_OFF_AUTO_AUTO;
@@ -1706,6 +1708,7 @@ static void pc_machine_initfn(Object *obj)
     pcms->pcspk = isa_new(TYPE_PC_SPEAKER);
     object_property_add_alias(OBJECT(pcms), "pcspk-audiodev",
                               OBJECT(pcms->pcspk), "audiodev");
+    cxl_machine_init(obj, ms->cxl_devices_state);
 }
 
 static void pc_machine_reset(MachineState *machine)
hw/pci-bridge/pci_expander_bridge.c +1 -1
index 69244decdb..02032360f5 100644
@@ -468,7 +468,7 @@ static void pxb_cxl_dev_realize(PCIDevice *dev, Error **errp)
         error_setg(errp, "pxb-cxl devices cannot reside on a PCI bus");
         return;
     }
-    if (!ms->cxl_devices_state->is_enabled) {
+    if (!ms->cxl_devices_state || !ms->cxl_devices_state->is_enabled) {
         error_setg(errp, "Machine does not have cxl=on");
         return;
     }
include/hw/boards.h +1 -0
index fa57bac4fb..dd9fc56df2 100644
@@ -362,6 +362,7 @@ struct MachineState {
     struct NVDIMMState *nvdimms_state;
     struct CXLState *cxl_devices_state;
     struct NumaState *numa_state;
+    CXLFixedMemoryWindowOptionsList *cfmws_list;
 };
 
 #define DEFINE_MACHINE(namestr, machine_initfn) \
include/hw/cxl/cxl.h +2 -5
index 21d28ca110..84078a484d 100644
@@ -12,6 +12,7 @@
 
 
 #include "qapi/qapi-types-machine.h"
+#include "qapi/qapi-visit-machine.h"
 #include "hw/pci/pci_bridge.h"
 #include "hw/pci/pci_host.h"
 #include "cxl_pci.h"
@@ -40,6 +41,7 @@ typedef struct CXLState {
     MemoryRegion host_mr;
     unsigned int next_mr_idx;
     GList *fixed_windows;
+    CXLFixedMemoryWindowOptionsList *cfmw_list;
 } CXLState;
 
 struct CXLHost {
@@ -51,11 +53,6 @@ struct CXLHost {
 #define TYPE_PXB_CXL_HOST "pxb-cxl-host"
 OBJECT_DECLARE_SIMPLE_TYPE(CXLHost, PXB_CXL_HOST)
 
-void cxl_fixed_memory_window_config(MachineState *ms,
-                                    CXLFixedMemoryWindowOptions *object,
-                                    Error **errp);
 void cxl_fixed_memory_window_link_targets(Error **errp);
 
-extern const MemoryRegionOps cfmws_ops;
-
 #endif
include/hw/cxl/cxl_host.h new file +21 -0
new file mode 100644
index 0000000000..87a6933de2
@@ -0,0 +1,21 @@
+/*
+ * QEMU CXL Host Setup
+ *
+ * Copyright (c) 2022 Huawei
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/cxl/cxl.h"
+#include "hw/boards.h"
+
+#ifndef CXL_HOST_H
+#define CXL_HOST_H
+
+void cxl_machine_init(Object *obj, CXLState *state);
+
+extern const MemoryRegionOps cfmws_ops;
+
+#endif
qapi/machine.json +13 -0
index 883ce3f9ea..b17ac79494 100644
@@ -523,6 +523,19 @@
       '*interleave-granularity': 'size',
       'targets': ['str'] }}
 
+##
+# @CXLFMWProperties:
+#
+# List of CXL Fixed Memory Windows.
+#
+# @cxl-fmw: List of CXLFixedMemoryWindowOptions
+#
+# Since 7.1
+##
+{ 'struct' : 'CXLFMWProperties',
+  'data': { 'cxl-fmw': ['CXLFixedMemoryWindowOptions'] }
+}
+
 ##
 # @X86CPURegister32:
 #
softmmu/vl.c +0 -44

80 lines not on this page · raw message

tests/qtest/bios-tables-test.c +2 -2
index a4a46e97f0..8a3a320aea 100644
@@ -1567,8 +1567,8 @@ static void test_acpi_q35_cxl(void)
                              " -device cxl-type3,bus=rp3,memdev=cxl-mem3,lsa=lsa3"
                              " -device cxl-rp,port=1,bus=cxl.2,id=rp4,chassis=0,slot=6"
                              " -device cxl-type3,bus=rp4,memdev=cxl-mem4,lsa=lsa4"
-                             " -cxl-fixed-memory-window targets.0=cxl.1,size=4G,interleave-granularity=8k"
-                             " -cxl-fixed-memory-window targets.0=cxl.1,targets.1=cxl.2,size=4G,interleave-granularity=8k",
+                             " -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=8k,"
+                             "cxl-fmw.1.targets.0=cxl.1,cxl-fmw.1.targets.1=cxl.2,cxl-fmw.1.size=4G,cxl-fmw.1.interleave-granularity=8k",
                              tmp_path, tmp_path, tmp_path, tmp_path,
                              tmp_path, tmp_path, tmp_path, tmp_path);
     test_acpi_one(params, &data);
tests/qtest/cxl-test.c +2 -2
index 079011af6a..2133e973f4 100644
@@ -10,12 +10,12 @@
 
 #define QEMU_PXB_CMD "-machine q35,cxl=on " \
                      "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 "  \
-                     "-cxl-fixed-memory-window targets.0=cxl.0,size=4G "
+                     "-M cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.size=4G "
 
 #define QEMU_2PXB_CMD "-machine q35,cxl=on "                            \
                       "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 "  \
                       "-device pxb-cxl,id=cxl.1,bus=pcie.0,bus_nr=53 " \
-                      "-cxl-fixed-memory-window targets.0=cxl.0,targets.1=cxl.1,size=4G "
+                      "-M cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.targets.1=cxl.1,cxl-fmw.0.size=4G "
 
 #define QEMU_RP "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 "
 
Signature · 1 line
2.32.0
Reviewed-by on v2 1/8
#2 lore raw

Re: [PATCH v2 1/8] hw/cxl: Make the CXL fixed memory window setup a machine parameter.

Quoted 7 lines · Jonathan Cameron

Paolo Bonzini requested this change to simplify the ongoing effort to allow machine setup entirely via RPC.

Includes shortening the command line form cxl-fixed-memory-window to cxl-fmw as the command lines are extremely long even with this change.

Quoted 8 lines

The json change is needed to ensure that there is a CXLFixedMemoryWindowOptionsList even though the actual element in the json is never used. Similar to existing SgxEpcProperties.

Update cxl-test and bios-tables-test to reflect new parameters.

One thing missing however is updating qemu-options.hx - maybe fold in the below?

Thanks!

----8<-------

qemu-options.hx +33 -38
index 60cf188da429..3bcf1247b88a 100644
@@ -127,10 +127,43 @@ SRST
 ERST
 
 DEF("M", HAS_ARG, QEMU_OPTION_M,
+    "                cxl-fmw.0.targets.0=firsttarget,cxl-fmw.0.targets.1=secondtarget,cxl-fmw.0.size=size[,cxl-fmw.0.interleave-granularity=granularity]\n"
     "                sgx-epc.0.memdev=memid,sgx-epc.0.node=numaid\n",
     QEMU_ARCH_ALL)
 
 SRST
+``cxl-fmw.0.targets.0=firsttarget,cxl-fmw.0.targets.1=secondtarget,cxl-fmw.0.size=size[,cxl-fmw.0.interleave-granularity=granularity]``
+    Define a CXL Fixed Memory Window (CFMW).
+
+    Described in the CXL 2.0 ECN: CEDT CFMWS & QTG _DSM.
+
+    They are regions of Host Physical Addresses (HPA) on a system which
+    may be interleaved across one or more CXL host bridges.  The system
+    software will assign particular devices into these windows and
+    configure the downstream Host-managed Device Memory (HDM) decoders
+    in root ports, switch ports and devices appropriately to meet the
+    interleave requirements before enabling the memory devices.
+
+    ``targets.X=firsttarget`` provides the mapping to CXL host bridges
+    which may be identified by the id provied in the -device entry.
+    Multiple entries are needed to specify all the targets when
+    the fixed memory window represents interleaved memory. X is the
+    target index from 0.
+
+    ``size=size`` sets the size of the CFMW. This must be a multiple of
+    256MiB. The region will be aligned to 256MiB but the location is
+    platform and configuration dependent.
+
+    ``interleave-granularity=granularity`` sets the granularity of
+    interleave. Default 256KiB. Only 256KiB, 512KiB, 1024KiB, 2048KiB
+    4096KiB, 8192KiB and 16384KiB granularities supported.
+
+    Example:
+
+    ::
+
+	-M cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.targets.1=cxl.1,cxl-fmw.0.size=128G,cxl-fmw.0.interleave-granularity=512k
+
 ``sgx-epc.0.memdev=@var{memid},sgx-epc.0.node=@var{numaid}``
     Define an SGX EPC section.
 ERST
@@ -467,44 +500,6 @@ SRST
         -numa hmat-cache,node-id=1,size=10K,level=1,associativity=direct,policy=write-back,line=8
 ERST
 
-DEF("cxl-fixed-memory-window", HAS_ARG, QEMU_OPTION_cxl_fixed_memory_window,
-    "-cxl-fixed-memory-window targets.0=firsttarget,targets.1=secondtarget,size=size[,interleave-granularity=granularity]\n",
-    QEMU_ARCH_ALL)
-SRST
-``-cxl-fixed-memory-window targets.0=firsttarget,targets.1=secondtarget,size=size[,interleave-granularity=granularity]``
-    Define a CXL Fixed Memory Window (CFMW).
-
-    Described in the CXL 2.0 ECN: CEDT CFMWS & QTG _DSM.
-
-    They are regions of Host Physical Addresses (HPA) on a system which
-    may be interleaved across one or more CXL host bridges.  The system
-    software will assign particular devices into these windows and
-    configure the downstream Host-managed Device Memory (HDM) decoders
-    in root ports, switch ports and devices appropriately to meet the
-    interleave requirements before enabling the memory devices.
-
-    ``targets.X=firsttarget`` provides the mapping to CXL host bridges
-    which may be identified by the id provied in the -device entry.
-    Multiple entries are needed to specify all the targets when
-    the fixed memory window represents interleaved memory. X is the
-    target index from 0.
-
-    ``size=size`` sets the size of the CFMW. This must be a multiple of
-    256MiB. The region will be aligned to 256MiB but the location is
-    platform and configuration dependent.
-
-    ``interleave-granularity=granularity`` sets the granularity of
-    interleave. Default 256KiB. Only 256KiB, 512KiB, 1024KiB, 2048KiB
-    4096KiB, 8192KiB and 16384KiB granularities supported.
-
-    Example:
-
-    ::
-
-        -cxl-fixed-memory-window targets.0=cxl.0,targets.1=cxl.1,size=128G,interleave-granularity=512k
-
-ERST
-
 DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd,
     "-add-fd fd=fd,set=set[,opaque=opaque]\n"
     "                Add 'fd' to fd 'set'\n", QEMU_ARCH_ALL)
#3 lore raw

Re: [PATCH v2 1/8] hw/cxl: Make the CXL fixed memory window setup a machine parameter.

Quoted 14 lines · On Tue, 7 Jun 2022 15:37:02 -0700 Davidlohr Bueso <[email protected]> wrote:
Quoted 12 lines · Jonathan Cameron

Paolo Bonzini requested this change to simplify the ongoing effort to allow machine setup entirely via RPC.

Includes shortening the command line form cxl-fixed-memory-window to cxl-fmw as the command lines are extremely long even with this change.

The json change is needed to ensure that there is a CXLFixedMemoryWindowOptionsList even though the actual element in the json is never used. Similar to existing SgxEpcProperties.

Quoted 5 lines
Quoted 3 lines

Update cxl-test and bios-tables-test to reflect new parameters.

Thanks.

Quoted 3 lines

One thing missing however is updating qemu-options.hx - maybe fold in the below?

Excellent point.

The original patch set has been rolling so long I'd forgotten we had documentation in qemu-options.hx.

One comment inline though...

Quoted 10 lines

Thanks!

----8<-------
o

qemu-options.hx +0 -0
index 60cf188da429..3bcf1247b88a 100644

qemu-options.hx SRST · line 130

Quoted 4 lines
qemu-options.hx +1 -0
@@ -127,10 +127,43 @@ SRST
  ERST
 
  DEF("M", HAS_ARG, QEMU_OPTION_M,
+    "                cxl-fmw.0.targets.0=firsttarget,cxl-fmw.0.targets.1=secondtarget,cxl-fmw.0.size=size[,cxl-fmw.0.interleave-granularity=granularity]\n"

This _M entry is odd, given it's just short hand for _machine. So I'm thinking it makes more sense to document this lot in the "machine" block further up the doc. That particular entry has a different style to this one, so I'll modify this inline with existing entries there.

Possibly someone should move the sgx entry over to machine as well. +Cc Sean Chistopherson and Yan Zhong as that sgx-epc entry is from their patch set. A quick glance through discussion of that patch didn't throw up a reason for doing it as a separate entry, but I haven't dug deep.

Quoted 84 lines
qemu-options.hx +32 -38
      "                sgx-epc.0.memdev=memid,sgx-epc.0.node=numaid\n",
      QEMU_ARCH_ALL)
 
  SRST
+``cxl-fmw.0.targets.0=firsttarget,cxl-fmw.0.targets.1=secondtarget,cxl-fmw.0.size=size[,cxl-fmw.0.interleave-granularity=granularity]``
+    Define a CXL Fixed Memory Window (CFMW).
+
+    Described in the CXL 2.0 ECN: CEDT CFMWS & QTG _DSM.
+
+    They are regions of Host Physical Addresses (HPA) on a system which
+    may be interleaved across one or more CXL host bridges.  The system
+    software will assign particular devices into these windows and
+    configure the downstream Host-managed Device Memory (HDM) decoders
+    in root ports, switch ports and devices appropriately to meet the
+    interleave requirements before enabling the memory devices.
+
+    ``targets.X=firsttarget`` provides the mapping to CXL host bridges
+    which may be identified by the id provied in the -device entry.
+    Multiple entries are needed to specify all the targets when
+    the fixed memory window represents interleaved memory. X is the
+    target index from 0.
+
+    ``size=size`` sets the size of the CFMW. This must be a multiple of
+    256MiB. The region will be aligned to 256MiB but the location is
+    platform and configuration dependent.
+
+    ``interleave-granularity=granularity`` sets the granularity of
+    interleave. Default 256KiB. Only 256KiB, 512KiB, 1024KiB, 2048KiB
+    4096KiB, 8192KiB and 16384KiB granularities supported.
+
+    Example:
+
+    ::
+
+	-M cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.targets.1=cxl.1,cxl-fmw.0.size=128G,cxl-fmw.0.interleave-granularity=512k
+
  ``sgx-epc.0.memdev=@var{memid},sgx-epc.0.node=@var{numaid}``
      Define an SGX EPC section.
  ERST
@@ -467,44 +500,6 @@ SRST
          -numa hmat-cache,node-id=1,size=10K,level=1,associativity=direct,policy=write-back,line=8
  ERST
 
-DEF("cxl-fixed-memory-window", HAS_ARG, QEMU_OPTION_cxl_fixed_memory_window,
-    "-cxl-fixed-memory-window targets.0=firsttarget,targets.1=secondtarget,size=size[,interleave-granularity=granularity]\n",
-    QEMU_ARCH_ALL)
-SRST
-``-cxl-fixed-memory-window targets.0=firsttarget,targets.1=secondtarget,size=size[,interleave-granularity=granularity]``
-    Define a CXL Fixed Memory Window (CFMW).
-
-    Described in the CXL 2.0 ECN: CEDT CFMWS & QTG _DSM.
-
-    They are regions of Host Physical Addresses (HPA) on a system which
-    may be interleaved across one or more CXL host bridges.  The system
-    software will assign particular devices into these windows and
-    configure the downstream Host-managed Device Memory (HDM) decoders
-    in root ports, switch ports and devices appropriately to meet the
-    interleave requirements before enabling the memory devices.
-
-    ``targets.X=firsttarget`` provides the mapping to CXL host bridges
-    which may be identified by the id provied in the -device entry.
-    Multiple entries are needed to specify all the targets when
-    the fixed memory window represents interleaved memory. X is the
-    target index from 0.
-
-    ``size=size`` sets the size of the CFMW. This must be a multiple of
-    256MiB. The region will be aligned to 256MiB but the location is
-    platform and configuration dependent.
-
-    ``interleave-granularity=granularity`` sets the granularity of
-    interleave. Default 256KiB. Only 256KiB, 512KiB, 1024KiB, 2048KiB
-    4096KiB, 8192KiB and 16384KiB granularities supported.
-
-    Example:
-
-    ::
-
-        -cxl-fixed-memory-window targets.0=cxl.0,targets.1=cxl.1,size=128G,interleave-granularity=512k
-
-ERST
-
  DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd,
      "-add-fd fd=fd,set=set[,opaque=opaque]\n"
      "                Add 'fd' to fd 'set'\n", QEMU_ARCH_ALL)
#4 lore raw

PATCH v2 2/8 hw/acpi/cxl: Pass in the CXLState directly rather than MachineState

In reply to Jonathan Cameron

Refactoring step on path to moving all CXL state out of MachineState.

---
 hw/acpi/cxl.c         | 9 ++++-----
 hw/i386/acpi-build.c  | 4 ++--
 include/hw/acpi/cxl.h | 5 +++--
 3 files changed, 9 insertions(+), 9 deletions(-)
hw/acpi/cxl.c +4 -5
index 31d5235136..2bf8c07993 100644
@@ -65,9 +65,8 @@ static void cedt_build_chbs(GArray *table_data, PXBDev *cxl)
  * Interleave ways encoding in CXL 2.0 ECN: 3, 6, 12 and 16-way memory
  * interleaving.
  */
-static void cedt_build_cfmws(GArray *table_data, MachineState *ms)
+static void cedt_build_cfmws(GArray *table_data, CXLState *cxls)
 {
-    CXLState *cxls = ms->cxl_devices_state;
     GList *it;
 
     for (it = cxls->fixed_windows; it; it = it->next) {
@@ -129,9 +128,9 @@ static int cxl_foreach_pxb_hb(Object *obj, void *opaque)
     return 0;
 }
 
-void cxl_build_cedt(MachineState *ms, GArray *table_offsets, GArray *table_data,
+void cxl_build_cedt(GArray *table_offsets, GArray *table_data,
                     BIOSLinker *linker, const char *oem_id,
-                    const char *oem_table_id)
+                    const char *oem_table_id, CXLState *cxl_state)
 {
     Aml *cedt;
     AcpiTable table = { .sig = "CEDT", .rev = 1, .oem_id = oem_id,
@@ -144,7 +143,7 @@ void cxl_build_cedt(MachineState *ms, GArray *table_offsets, GArray *table_data,
     /* reserve space for CEDT header */
 
     object_child_foreach_recursive(object_get_root(), cxl_foreach_pxb_hb, cedt);
-    cedt_build_cfmws(cedt->buf, ms);
+    cedt_build_cfmws(cedt->buf, cxl_state);
 
     /* copy AML table into ACPI tables blob and patch header there */
     g_array_append_vals(table_data, cedt->buf->data, cedt->buf->len);
hw/i386/acpi-build.c +2 -2
index c125939ed6..2e3b1dd9a2 100644
@@ -2712,8 +2712,8 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
                           x86ms->oem_id, x86ms->oem_table_id);
     }
     if (machine->cxl_devices_state->is_enabled) {
-        cxl_build_cedt(machine, table_offsets, tables_blob, tables->linker,
-                       x86ms->oem_id, x86ms->oem_table_id);
+        cxl_build_cedt(table_offsets, tables_blob, tables->linker,
+                       x86ms->oem_id, x86ms->oem_table_id, machine->cxl_devices_state);
     }
 
     acpi_add_table(table_offsets, tables_blob);
include/hw/acpi/cxl.h +3 -2
index 0c496538c0..acf4418886 100644
@@ -19,10 +19,11 @@
 #define HW_ACPI_CXL_H
 
 #include "hw/acpi/bios-linker-loader.h"
+#include "hw/cxl/cxl.h"
 
-void cxl_build_cedt(MachineState *ms, GArray *table_offsets, GArray *table_data,
+void cxl_build_cedt(GArray *table_offsets, GArray *table_data,
                     BIOSLinker *linker, const char *oem_id,
-                    const char *oem_table_id);
+                    const char *oem_table_id, CXLState *cxl_state);
 void build_cxl_osc_method(Aml *dev);
 
 #endif
Signature · 1 line
2.32.0
#5 lore raw

PATCH v2 3/8 hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.c

In reply to Jonathan Cameron

Whilst here take the oportunity to shorten the function name.

---
 hw/cxl/cxl-host-stubs.c   | 2 +-
 hw/cxl/cxl-host.c         | 8 +++-----
 hw/i386/pc.c              | 5 +++++
 include/hw/cxl/cxl.h      | 2 --
 include/hw/cxl/cxl_host.h | 1 +
 softmmu/vl.c              | 2 --
 6 files changed, 10 insertions(+), 10 deletions(-)
hw/cxl/cxl-host-stubs.c +1 -1
index de3e8894d5..e0d5ec8ad5 100644
@@ -8,7 +8,7 @@
 #include "hw/cxl/cxl.h"
 #include "hw/cxl/cxl_host.h"
 
-void cxl_fixed_memory_window_link_targets(Error **errp) {};
+void cxl_fmws_link_targets(CXLState *stat, Error **errp) {};
 void cxl_machine_init(Object *obj, CXLState *state) {};
 
 const MemoryRegionOps cfmws_ops;
hw/cxl/cxl-host.c +3 -5
index 3a79c32b42..8e7738a65b 100644
@@ -68,14 +68,12 @@ static void cxl_fixed_memory_window_config(CXLState *cxl_state,
     return;
 }
 
-void cxl_fixed_memory_window_link_targets(Error **errp)
+void cxl_fmws_link_targets(CXLState *cxl_state, Error **errp)
 {
-    MachineState *ms = MACHINE(qdev_get_machine());
-
-    if (ms->cxl_devices_state && ms->cxl_devices_state->fixed_windows) {
+    if (cxl_state && cxl_state->fixed_windows) {
         GList *it;
 
-        for (it = ms->cxl_devices_state->fixed_windows; it; it = it->next) {
+        for (it = cxl_state->fixed_windows; it; it = it->next) {
             CXLFixedWindow *fw = it->data;
             int i;
 
hw/i386/pc.c +5 -0
index 98e63347f2..6cecd74d58 100644
@@ -732,6 +732,11 @@ void pc_machine_done(Notifier *notifier, void *data)
     PCMachineState *pcms = container_of(notifier,
                                         PCMachineState, machine_done);
     X86MachineState *x86ms = X86_MACHINE(pcms);
+    MachineState *ms = MACHINE(pcms);
+
+    if (ms->cxl_devices_state) {
+        cxl_fmws_link_targets(ms->cxl_devices_state, &error_fatal);
+    }
 
     /* set the number of CPUs */
     x86_rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus);
include/hw/cxl/cxl.h +0 -2
index 84078a484d..134b295b40 100644
@@ -53,6 +53,4 @@ struct CXLHost {
 #define TYPE_PXB_CXL_HOST "pxb-cxl-host"
 OBJECT_DECLARE_SIMPLE_TYPE(CXLHost, PXB_CXL_HOST)
 
-void cxl_fixed_memory_window_link_targets(Error **errp);
-
 #endif
include/hw/cxl/cxl_host.h +1 -0
index 87a6933de2..4d642a81fa 100644
@@ -15,6 +15,7 @@
 #define CXL_HOST_H
 
 void cxl_machine_init(Object *obj, CXLState *state);
+void cxl_fmws_link_targets(CXLState *stat, Error **errp);
 
 extern const MemoryRegionOps cfmws_ops;
 
softmmu/vl.c +0 -2
index 10d50a2af1..ecef75b77b 100644
@@ -93,7 +93,6 @@
 #include "qemu/config-file.h"
 #include "qemu/qemu-options.h"
 #include "qemu/main-loop.h"
-#include "hw/cxl/cxl.h"
 #ifdef CONFIG_VIRTFS
 #include "fsdev/qemu-fsdev.h"
 #endif
@@ -2665,7 +2664,6 @@ void qmp_x_exit_preconfig(Error **errp)
 
     qemu_init_board();
     qemu_create_cli_devices();
-    cxl_fixed_memory_window_link_targets(errp);
     qemu_machine_creation_done();
 
     if (loadvm) {
Signature · 1 line
2.32.0
#6 lore raw

PATCH v2 4/8 tests/acpi: Allow modification of q35 CXL CEDT table.

In reply to Jonathan Cameron

Needed to allow memory address changes as a result of next patch.

---
 tests/qtest/bios-tables-test-allowed-diff.h | 1 +
 1 file changed, 1 insertion(+)
tests/qtest/bios-tables-test-allowed-diff.h +1 -0
index dfb8523c8b..effa58b75b 100644
@@ -1 +1,2 @@
 /* List of comma-separated changed AML files to ignore */
+"tests/data/acpi/q35/CEDT.cxl",
Signature · 1 line
2.32.0
#7 lore raw

PATCH v2 5/8 pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.

In reply to Jonathan Cameron

As the CXLState will no long be accessible via MachineState at time of PXB_CXL realization, come back later from the machine specific code to fill in the missing memory region setup. Only at this stage is it possible to check if cxl=on, so that check is moved to this later point.

Note that for multiple host bridges, the allocation order of the register spaces is changed. This will be reflected in ACPI CEDT.

Stubs are added to handle case of CONFIG_PXB=n for machines that call these functions.

The bus walking logic is common to all machines so add a utility function + stub to cxl-host*.

---
 hw/cxl/cxl-host-stubs.c                     |  1 +
 hw/cxl/cxl-host.c                           | 20 +++++++++++++
 hw/i386/pc.c                                |  3 ++
 hw/pci-bridge/meson.build                   |  5 +++-
 hw/pci-bridge/pci_expander_bridge.c         | 32 +++++++++++++--------
 hw/pci-bridge/pci_expander_bridge_stubs.c   | 14 +++++++++
 include/hw/cxl/cxl_host.h                   |  1 +
 include/hw/pci-bridge/pci_expander_bridge.h | 12 ++++++++
 8 files changed, 75 insertions(+), 13 deletions(-)
hw/cxl/cxl-host-stubs.c +1 -0
index e0d5ec8ad5..cae4afcdde 100644
@@ -10,5 +10,6 @@
 
 void cxl_fmws_link_targets(CXLState *stat, Error **errp) {};
 void cxl_machine_init(Object *obj, CXLState *state) {};
+void cxl_hook_up_pxb_registers(PCIBus *bus, CXLState *state, Error **errp) {};
 
 const MemoryRegionOps cfmws_ops;
hw/cxl/cxl-host.c +20 -0
index 8e7738a65b..efa14908d8 100644
@@ -20,6 +20,7 @@
 #include "hw/pci/pci_bridge.h"
 #include "hw/pci/pci_host.h"
 #include "hw/pci/pcie_port.h"
+#include "hw/pci-bridge/pci_expander_bridge.h"
 
 static void cxl_fixed_memory_window_config(CXLState *cxl_state,
                                            CXLFixedMemoryWindowOptions *object,
@@ -280,3 +281,22 @@ void cxl_machine_init(Object *obj, CXLState *state)
     object_property_set_description(obj, "cxl-fmw",
                                     "CXL Fixed Memory Windows (array)");
 }
+
+void cxl_hook_up_pxb_registers(PCIBus *bus, CXLState *state, Error **errp)
+{
+    /* Walk the pci busses looking for pxb busses to hook up */
+    if (bus) {
+        QLIST_FOREACH(bus, &bus->child, sibling) {
+            if (!pci_bus_is_root(bus)) {
+                continue;
+            }
+            if (pci_bus_is_cxl(bus)) {
+                if (!state->is_enabled) {
+                    error_setg(errp, "CXL host bridges present, but cxl=off");
+                    return;
+                }
+                pxb_cxl_hook_up_registers(state, bus, errp);
+            }
+        }
+    }
+}
hw/i386/pc.c +3 -0
index 6cecd74d58..9f48d02739 100644
@@ -37,6 +37,7 @@
 #include "hw/ide.h"
 #include "hw/pci/pci.h"
 #include "hw/pci/pci_bus.h"
+#include "hw/pci-bridge/pci_expander_bridge.h"
 #include "hw/nvram/fw_cfg.h"
 #include "hw/timer/hpet.h"
 #include "hw/firmware/smbios.h"
@@ -735,6 +736,8 @@ void pc_machine_done(Notifier *notifier, void *data)
     MachineState *ms = MACHINE(pcms);
 
     if (ms->cxl_devices_state) {
+        cxl_hook_up_pxb_registers(pcms->bus, ms->cxl_devices_state,
+                                  &error_fatal);
         cxl_fmws_link_targets(ms->cxl_devices_state, &error_fatal);
     }
 
hw/pci-bridge/meson.build +4 -1
index b6d26a03d5..fdbe2e07c5 100644
@@ -3,7 +3,8 @@ pci_ss.add(files('pci_bridge_dev.c'))
 pci_ss.add(when: 'CONFIG_I82801B11', if_true: files('i82801b11.c'))
 pci_ss.add(when: 'CONFIG_IOH3420', if_true: files('ioh3420.c'))
 pci_ss.add(when: 'CONFIG_PCIE_PORT', if_true: files('pcie_root_port.c', 'gen_pcie_root_port.c', 'pcie_pci_bridge.c'))
-pci_ss.add(when: 'CONFIG_PXB', if_true: files('pci_expander_bridge.c'))
+pci_ss.add(when: 'CONFIG_PXB', if_true: files('pci_expander_bridge.c'),
+                               if_false: files('pci_expander_bridge_stubs.c'))
 pci_ss.add(when: 'CONFIG_XIO3130', if_true: files('xio3130_upstream.c', 'xio3130_downstream.c'))
 pci_ss.add(when: 'CONFIG_CXL', if_true: files('cxl_root_port.c'))
 
@@ -13,3 +14,5 @@ pci_ss.add(when: 'CONFIG_DEC_PCI', if_true: files('dec.c'))
 pci_ss.add(when: 'CONFIG_SIMBA', if_true: files('simba.c'))
 
 softmmu_ss.add_all(when: 'CONFIG_PCI', if_true: pci_ss)
+
+softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('pci_expander_bridge_stubs.c'))
hw/pci-bridge/pci_expander_bridge.c +20 -12
index 02032360f5..c9e817aa58 100644
@@ -17,6 +17,7 @@
 #include "hw/pci/pci_host.h"
 #include "hw/qdev-properties.h"
 #include "hw/pci/pci_bridge.h"
+#include "hw/pci-bridge/pci_expander_bridge.h"
 #include "hw/cxl/cxl.h"
 #include "qemu/range.h"
 #include "qemu/error-report.h"
@@ -186,25 +187,38 @@ static const TypeInfo pxb_host_info = {
 
 static void pxb_cxl_realize(DeviceState *dev, Error **errp)
 {
-    MachineState *ms = MACHINE(qdev_get_machine());
     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
     CXLHost *cxl = PXB_CXL_HOST(dev);
     CXLComponentState *cxl_cstate = &cxl->cxl_cstate;
     struct MemoryRegion *mr = &cxl_cstate->crb.component_registers;
-    hwaddr offset;
 
     cxl_component_register_block_init(OBJECT(dev), cxl_cstate,
                                       TYPE_PXB_CXL_HOST);
     sysbus_init_mmio(sbd, mr);
+}
+
+/*
+ * Host bridge realization has no means of knowning state associated
+ * with a particular machine. As such, it is nececssary to delay
+ * final setup of the host bridge register space until later in the
+ * machine bring up.
+ */
+void pxb_cxl_hook_up_registers(CXLState *cxl_state, PCIBus *bus, Error **errp)
+{
+    PXBDev *pxb =  PXB_CXL_DEV(pci_bridge_get_device(bus));
+    CXLHost *cxl = pxb->cxl.cxl_host_bridge;
+    CXLComponentState *cxl_cstate = &cxl->cxl_cstate;
+    struct MemoryRegion *mr = &cxl_cstate->crb.component_registers;
+    hwaddr offset;
 
-    offset = memory_region_size(mr) * ms->cxl_devices_state->next_mr_idx;
-    if (offset > memory_region_size(&ms->cxl_devices_state->host_mr)) {
+    offset = memory_region_size(mr) * cxl_state->next_mr_idx;
+    if (offset > memory_region_size(&cxl_state->host_mr)) {
         error_setg(errp, "Insufficient space for pxb cxl host register space");
         return;
     }
 
-    memory_region_add_subregion(&ms->cxl_devices_state->host_mr, offset, mr);
-    ms->cxl_devices_state->next_mr_idx++;
+    memory_region_add_subregion(&cxl_state->host_mr, offset, mr);
+    cxl_state->next_mr_idx++;
 }
 
 static void pxb_cxl_host_class_init(ObjectClass *class, void *data)
@@ -461,17 +475,11 @@ static const TypeInfo pxb_pcie_dev_info = {
 
 static void pxb_cxl_dev_realize(PCIDevice *dev, Error **errp)
 {
-    MachineState *ms = MACHINE(qdev_get_machine());
-
     /* A CXL PXB's parent bus is still PCIe */
     if (!pci_bus_is_express(pci_get_bus(dev))) {
         error_setg(errp, "pxb-cxl devices cannot reside on a PCI bus");
         return;
     }
-    if (!ms->cxl_devices_state || !ms->cxl_devices_state->is_enabled) {
-        error_setg(errp, "Machine does not have cxl=on");
-        return;
-    }
 
     pxb_dev_realize_common(dev, CXL, errp);
     pxb_dev_reset(DEVICE(dev));
hw/pci-bridge/pci_expander_bridge_stubs.c new file +14 -0
new file mode 100644
index 0000000000..b35180311f
@@ -0,0 +1,14 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Stubs for calls made from machines to handle the case where CONFIG_PXB
+ * is not enabled.
+ */
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_bus.h"
+#include "hw/pci-bridge/pci_expander_bridge.h"
+#include "hw/cxl/cxl.h"
+
+void pxb_cxl_hook_up_registers(CXLState *state, PCIBus *bus, Error **errp) {};
include/hw/cxl/cxl_host.h +1 -0
index 4d642a81fa..a1b662ce40 100644
@@ -16,6 +16,7 @@
 
 void cxl_machine_init(Object *obj, CXLState *state);
 void cxl_fmws_link_targets(CXLState *stat, Error **errp);
+void cxl_hook_up_pxb_registers(PCIBus *bus, CXLState *state, Error **errp);
 
 extern const MemoryRegionOps cfmws_ops;
 
include/hw/pci-bridge/pci_expander_bridge.h new file +12 -0
new file mode 100644
index 0000000000..0b3856d615
@@ -0,0 +1,12 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef PCI_EXPANDER_BRIDGE_H
+#define PCI_EXPANDER_BRIDGE_H
+
+#include "hw/cxl/cxl.h"
+
+void pxb_cxl_hook_up_registers(CXLState *state, PCIBus *bus, Error **errp);
+
+#endif /* PCI_EXPANDER_BRIDGE_H */
Signature · 1 line
2.32.0
#8 lore raw

PATCH v2 6/8 tests/acpi: Update q35/CEDT.cxl for new memory addresses.

In reply to Jonathan Cameron

The CEDT table includes addreses of host bridge registers. There are allocated in a different order due to the previous patch, so update to the table is needed.

---
 tests/data/acpi/q35/CEDT.cxl                | Bin 184 -> 184 bytes
 tests/qtest/bios-tables-test-allowed-diff.h |   1 -
 2 files changed, 1 deletion(-)
tests/data/acpi/q35/CEDT.cxl binary +0 -0
index b8fa06b00e65712e91e0a5ea0d9277e0146d1c00..ff8203af070241bd23dd0eb8a51460692bb7d229 100644
GIT binary patch
tests/qtest/bios-tables-test-allowed-diff.h +0 -1
index effa58b75b..dfb8523c8b 100644
@@ -1,2 +1 @@
 /* List of comma-separated changed AML files to ignore */
-"tests/data/acpi/q35/CEDT.cxl",
Signature · 1 line
2.32.0
#9 lore raw

PATCH v2 7/8 hw/cxl: Move the CXLState from MachineState to machine type specific state.

In reply to Jonathan Cameron

This removes the last of the CXL code from the MachineState where it is visible to all Machines to only those that support CXL (currently i386/pc) As i386/pc always support CXL now, stop allocating the state independently.

Note the pxb register hookup code runs even if cxl=off in order to detect pxb_cxl host bridges and fail to start if any are present as they won't have the control registers available.

---
 hw/core/machine.c    |  6 ------
 hw/i386/acpi-build.c |  6 +++---
 hw/i386/pc.c         | 33 ++++++++++++++++-----------------
 include/hw/boards.h  |  1 -
 include/hw/i386/pc.h |  2 ++
 5 files changed, 21 insertions(+), 27 deletions(-)
hw/core/machine.c +0 -6
index 87787b5604..eb3f1b5302 100644
@@ -33,7 +33,6 @@
 #include "sysemu/qtest.h"
 #include "hw/pci/pci.h"
 #include "hw/mem/nvdimm.h"
-#include "hw/cxl/cxl.h"
 #include "migration/global_state.h"
 #include "migration/vmstate.h"
 #include "exec/confidential-guest-support.h"
@@ -1074,10 +1073,6 @@ static void machine_initfn(Object *obj)
                                         "Valid values are cpu, mem-ctrl");
     }
 
-    if (mc->cxl_supported) {
-        ms->cxl_devices_state = g_new0(CXLState, 1);
-    }
-
     if (mc->cpu_index_to_instance_props && mc->get_default_cpu_node_id) {
         ms->numa_state = g_new0(NumaState, 1);
         object_property_add_bool(obj, "hmat",
@@ -1115,7 +1110,6 @@ static void machine_finalize(Object *obj)
     g_free(ms->device_memory);
     g_free(ms->nvdimms_state);
     g_free(ms->numa_state);
-    g_free(ms->cxl_devices_state);
 }
 
 bool machine_usb(MachineState *machine)
hw/i386/acpi-build.c +3 -3
index 2e3b1dd9a2..e8b7844841 100644
@@ -1633,7 +1633,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
 
             /* Handle the ranges for the PXB expanders */
             if (pci_bus_is_cxl(bus)) {
-                MemoryRegion *mr = &machine->cxl_devices_state->host_mr;
+                MemoryRegion *mr = &pcms->cxl_devices_state.host_mr;
                 uint64_t base = mr->addr;
 
                 cxl_present = true;
@@ -2711,9 +2711,9 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
                           machine->nvdimms_state, machine->ram_slots,
                           x86ms->oem_id, x86ms->oem_table_id);
     }
-    if (machine->cxl_devices_state->is_enabled) {
+    if (pcms->cxl_devices_state.is_enabled) {
         cxl_build_cedt(table_offsets, tables_blob, tables->linker,
-                       x86ms->oem_id, x86ms->oem_table_id, machine->cxl_devices_state);
+                       x86ms->oem_id, x86ms->oem_table_id, &pcms->cxl_devices_state);
     }
 
     acpi_add_table(table_offsets, tables_blob);
hw/i386/pc.c +16 -17
index 9f48d02739..a0c0d69698 100644
@@ -733,12 +733,12 @@ void pc_machine_done(Notifier *notifier, void *data)
     PCMachineState *pcms = container_of(notifier,
                                         PCMachineState, machine_done);
     X86MachineState *x86ms = X86_MACHINE(pcms);
-    MachineState *ms = MACHINE(pcms);
 
-    if (ms->cxl_devices_state) {
-        cxl_hook_up_pxb_registers(pcms->bus, ms->cxl_devices_state,
-                                  &error_fatal);
-        cxl_fmws_link_targets(ms->cxl_devices_state, &error_fatal);
+    cxl_hook_up_pxb_registers(pcms->bus, &pcms->cxl_devices_state,
+                              &error_fatal);
+
+    if (pcms->cxl_devices_state.is_enabled) {
+        cxl_fmws_link_targets(&pcms->cxl_devices_state, &error_fatal);
     }
 
     /* set the number of CPUs */
@@ -908,8 +908,8 @@ void pc_memory_init(PCMachineState *pcms,
                                     &machine->device_memory->mr);
     }
 
-    if (machine->cxl_devices_state->is_enabled) {
-        MemoryRegion *mr = &machine->cxl_devices_state->host_mr;
+    if (pcms->cxl_devices_state.is_enabled) {
+        MemoryRegion *mr = &pcms->cxl_devices_state.host_mr;
         hwaddr cxl_size = MiB;
 
         if (pcmc->has_reserved_memory && machine->device_memory->base) {
@@ -927,12 +927,12 @@ void pc_memory_init(PCMachineState *pcms,
         memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
         memory_region_add_subregion(system_memory, cxl_base, mr);
         cxl_resv_end = cxl_base + cxl_size;
-        if (machine->cxl_devices_state->fixed_windows) {
+        if (pcms->cxl_devices_state.fixed_windows) {
             hwaddr cxl_fmw_base;
             GList *it;
 
             cxl_fmw_base = ROUND_UP(cxl_base + cxl_size, 256 * MiB);
-            for (it = machine->cxl_devices_state->fixed_windows; it; it = it->next) {
+            for (it = pcms->cxl_devices_state.fixed_windows; it; it = it->next) {
                 CXLFixedWindow *fw = it->data;
 
                 fw->base = cxl_fmw_base;
@@ -974,7 +974,7 @@ void pc_memory_init(PCMachineState *pcms,
             res_mem_end += memory_region_size(&machine->device_memory->mr);
         }
 
-        if (machine->cxl_devices_state->is_enabled) {
+        if (pcms->cxl_devices_state.is_enabled) {
             res_mem_end = cxl_resv_end;
         }
         *val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB));
@@ -1010,12 +1010,12 @@ uint64_t pc_pci_hole64_start(void)
     X86MachineState *x86ms = X86_MACHINE(pcms);
     uint64_t hole64_start = 0;
 
-    if (ms->cxl_devices_state->host_mr.addr) {
-        hole64_start = ms->cxl_devices_state->host_mr.addr +
-            memory_region_size(&ms->cxl_devices_state->host_mr);
-        if (ms->cxl_devices_state->fixed_windows) {
+    if (pcms->cxl_devices_state.host_mr.addr) {
+        hole64_start = pcms->cxl_devices_state.host_mr.addr +
+            memory_region_size(&pcms->cxl_devices_state.host_mr);
+        if (pcms->cxl_devices_state.fixed_windows) {
             GList *it;
-            for (it = ms->cxl_devices_state->fixed_windows; it; it = it->next) {
+            for (it = pcms->cxl_devices_state.fixed_windows; it; it = it->next) {
                 CXLFixedWindow *fw = it->data;
                 hole64_start = fw->mr.addr + memory_region_size(&fw->mr);
             }
@@ -1691,7 +1691,6 @@ static void pc_machine_set_max_fw_size(Object *obj, Visitor *v,
 static void pc_machine_initfn(Object *obj)
 {
     PCMachineState *pcms = PC_MACHINE(obj);
-    MachineState *ms = MACHINE(obj);
 
 #ifdef CONFIG_VMPORT
     pcms->vmport = ON_OFF_AUTO_AUTO;
@@ -1716,7 +1715,7 @@ static void pc_machine_initfn(Object *obj)
     pcms->pcspk = isa_new(TYPE_PC_SPEAKER);
     object_property_add_alias(OBJECT(pcms), "pcspk-audiodev",
                               OBJECT(pcms->pcspk), "audiodev");
-    cxl_machine_init(obj, ms->cxl_devices_state);
+    cxl_machine_init(obj, &pcms->cxl_devices_state);
 }
 
 static void pc_machine_reset(MachineState *machine)
include/hw/boards.h +0 -1
index dd9fc56df2..031f5f884d 100644
@@ -360,7 +360,6 @@ struct MachineState {
     CPUArchIdList *possible_cpus;
     CpuTopology smp;
     struct NVDIMMState *nvdimms_state;
-    struct CXLState *cxl_devices_state;
     struct NumaState *numa_state;
     CXLFixedMemoryWindowOptionsList *cfmws_list;
 };
include/hw/i386/pc.h +2 -0
index ffcac5121e..21be7aff26 100644
@@ -14,6 +14,7 @@
 #include "qom/object.h"
 #include "hw/i386/sgx-epc.h"
 #include "hw/firmware/smbios.h"
+#include "hw/cxl/cxl.h"
 
 #define HPET_INTCAP "hpet-intcap"
 
@@ -55,6 +56,7 @@ typedef struct PCMachineState {
     hwaddr memhp_io_base;
 
     SGXEPCState sgx_epc;
+    CXLState cxl_devices_state;
 } PCMachineState;
 
 #define PC_MACHINE_ACPI_DEVICE_PROP "acpi-device"
Signature · 1 line
2.32.0
#10 lore raw

PATCH v2 8/8 hw/machine: Drop cxl_supported flag as no longer useful

In reply to Jonathan Cameron

As all the CXL elements have moved to boards that support CXL, there is no need to maintain a top level flag.

---
 hw/i386/pc.c        | 1 -
 include/hw/boards.h | 1 -
 2 files changed, 2 deletions(-)
hw/i386/pc.c +0 -1
index a0c0d69698..1b6067ff22 100644
@@ -1804,7 +1804,6 @@ static void pc_machine_class_init(ObjectClass *oc, void *data)
     mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE;
     mc->nvdimm_supported = true;
     mc->smp_props.dies_supported = true;
-    mc->cxl_supported = true;
     mc->default_ram_id = "pc.ram";
 
     object_class_property_add(oc, PC_MACHINE_MAX_RAM_BELOW_4G, "size",
include/hw/boards.h +0 -1
index 031f5f884d..d94edcef28 100644
@@ -269,7 +269,6 @@ struct MachineClass {
     bool ignore_boot_device_suffixes;
     bool smbus_no_migration_support;
     bool nvdimm_supported;
-    bool cxl_supported;
     bool numa_mem_supported;
     bool auto_enable_numa;
     SMPCompatProps smp_props;
Signature · 1 line
2.32.0
Reviewed-by on the v2 series
#11 lore raw
In reply to Jonathan Cameron
Quoted 39 lines · Jonathan Cameron

Changes since v1 (thanks to Paolo Bonzini)
* Update 'description' of cxl-fmw as suggested to mention it's an array.
* Add a wrapper cxl_hook_up_pxb_registers() to cxl-host.c as it'll be common for all machines using CXL with PXB.

Run through the CI at:
https://gitlab.com/jic23/qemu/-/pipelines/553257456

V1 Cover letter:

Currently only machine with CXL support upstream is i386/pc but arm/virt patches have been posted and once this is merged an updated series will follow. Switch support is queued behind this as well because they both include documentation updates.

Paolo Bonzini highlighted a couple of issues with the current CXL emulation code.

* Top level parameter rather than machine for fixed memory windows

The --cxl-fixed-memory-window top level command line parameters won't play well with efforts to make it possible to instantiate entire machines via RPC. Better to move these to be machine configuration. This change is relatively straight forward, but does result in very long command lines (cannot break fixed window setup into multiple -M entries).

* Move all CXL stuff to machine specific code and helpers

To simplify the various interactions between machine setup and host bridges etc, currently various CXL steps are called from the generic core/machine.c and softmmu/vl.c + there are CXL elements in MachineState.

Much of this is straight forward to do with one exception:
The CXL pci_expander_bridge host bridges require MMIO register space. This series does this by walking the bus and filling the register space in via the machine_done callback. This is similar to the walk done for identifying host bridges in the ACPI building code but it is rather ugly and postpones rejection of PXB_CXL instances where cxl=off (default).

Quoted 4 lines

All comments welcome, but the first patch at least changes the command-line so to avoid have to add backwards compatibility code, it would be great to merge that before 7.1 is released.

LGTM overall. I'm not thrilled with introducing another [sub]scronym "fmw", but otherwise, no complaints.
Series is:

Quoted 46 lines

Thanks,

Jonathan

Jonathan Cameron (8):
hw/cxl: Make the CXL fixed memory window setup a machine parameter. hw/acpi/cxl: Pass in the CXLState directly rather than MachineState hw/cxl: Push linking of CXL targets into i386/pc rather than in
machine.c
tests/acpi: Allow modification of q35 CXL CEDT table. pci/pci_expander_bridge: For CXL HB delay the HB register memory
region setup.
tests/acpi: Update q35/CEDT.cxl for new memory addresses. hw/cxl: Move the CXLState from MachineState to machine type specific
state.
hw/machine: Drop cxl_supported flag as no longer useful

 docs/system/devices/cxl.rst                 |   4 +-
 hw/acpi/cxl.c                               |   9 +-
 hw/core/machine.c                           |  28 ------
 hw/cxl/cxl-host-stubs.c                     |   9 +-
 hw/cxl/cxl-host.c                           | 100 ++++++++++++++++++--
 hw/i386/acpi-build.c                        |   8 +-
 hw/i386/pc.c                                |  31 +++---
 hw/pci-bridge/meson.build                   |   5 +-
 hw/pci-bridge/pci_expander_bridge.c         |  32 ++++---
 hw/pci-bridge/pci_expander_bridge_stubs.c   |  14 +++
 include/hw/acpi/cxl.h                       |   5 +-
 include/hw/boards.h                         |   3 +-
 include/hw/cxl/cxl.h                        |   9 +-
 include/hw/cxl/cxl_host.h                   |  23 +++++
 include/hw/i386/pc.h                        |   2 +
 include/hw/pci-bridge/pci_expander_bridge.h |  12 +++
 qapi/machine.json                           |  13 +++
 softmmu/vl.c                                |  46 ---------
 tests/data/acpi/q35/CEDT.cxl                | Bin 184 -> 184 bytes
 tests/qtest/bios-tables-test.c              |   4 +-
 tests/qtest/cxl-test.c                      |   4 +-
 21 files changed, 222 insertions(+), 139 deletions(-)
 create mode 100644 hw/pci-bridge/pci_expander_bridge_stubs.c
 create mode 100644 include/hw/cxl/cxl_host.h
 create mode 100644 include/hw/pci-bridge/pci_expander_bridge.h
Signature · 1 line
2.32.0
#12 lore raw
Quoted 40 lines · On Mon, 6 Jun 2022 10:33:38 -0700 Ben Widawsky <[email protected]> wrote:
Quoted 39 lines · Jonathan Cameron

Changes since v1 (thanks to Paolo Bonzini)
* Update 'description' of cxl-fmw as suggested to mention it's an array.
* Add a wrapper cxl_hook_up_pxb_registers() to cxl-host.c as it'll be common for all machines using CXL with PXB.

Run through the CI at:
https://gitlab.com/jic23/qemu/-/pipelines/553257456

V1 Cover letter:

Currently only machine with CXL support upstream is i386/pc but arm/virt patches have been posted and once this is merged an updated series will follow. Switch support is queued behind this as well because they both include documentation updates.

Paolo Bonzini highlighted a couple of issues with the current CXL emulation code.

* Top level parameter rather than machine for fixed memory windows

The --cxl-fixed-memory-window top level command line parameters won't play well with efforts to make it possible to instantiate entire machines via RPC. Better to move these to be machine configuration. This change is relatively straight forward, but does result in very long command lines (cannot break fixed window setup into multiple -M entries).

* Move all CXL stuff to machine specific code and helpers

To simplify the various interactions between machine setup and host bridges etc, currently various CXL steps are called from the generic core/machine.c and softmmu/vl.c + there are CXL elements in MachineState.

Much of this is straight forward to do with one exception:
The CXL pci_expander_bridge host bridges require MMIO register space. This series does this by walking the bus and filling the register space in via the machine_done callback. This is similar to the walk done for identifying host bridges in the ACPI building code but it is rather ugly and postpones rejection of PXB_CXL instances where cxl=off (default).

Quoted 7 lines
Quoted 4 lines

All comments welcome, but the first patch at least changes the command-line so to avoid have to add backwards compatibility code, it would be great to merge that before 7.1 is released.

LGTM overall. I'm not thrilled with introducing another [sub]scronym "fmw", but otherwise, no complaints.

Agreed, it's a less than ideal compromise :(

Spelling it out now seems too long as it has to be repeated a lot in a given commandline. I think cfmw is too vague for a QEMU parameter and for CXL only the ACPI "structure" (hence the s) has defined acronym of CFMWS. The underlying actual routing hardware is impdef so never given an acronym (there is only one direct reference to the window itself in the CXL spec and that's spelled out as "fixed-memory window").

Jonathan

Quoted 50 lines

Series is:

Quoted 46 lines

Thanks,

Jonathan

Jonathan Cameron (8):
hw/cxl: Make the CXL fixed memory window setup a machine parameter. hw/acpi/cxl: Pass in the CXLState directly rather than MachineState hw/cxl: Push linking of CXL targets into i386/pc rather than in
machine.c
tests/acpi: Allow modification of q35 CXL CEDT table. pci/pci_expander_bridge: For CXL HB delay the HB register memory
region setup.
tests/acpi: Update q35/CEDT.cxl for new memory addresses. hw/cxl: Move the CXLState from MachineState to machine type specific
state.
hw/machine: Drop cxl_supported flag as no longer useful

 docs/system/devices/cxl.rst                 |   4 +-
 hw/acpi/cxl.c                               |   9 +-
 hw/core/machine.c                           |  28 ------
 hw/cxl/cxl-host-stubs.c                     |   9 +-
 hw/cxl/cxl-host.c                           | 100 ++++++++++++++++++--
 hw/i386/acpi-build.c                        |   8 +-
 hw/i386/pc.c                                |  31 +++---
 hw/pci-bridge/meson.build                   |   5 +-
 hw/pci-bridge/pci_expander_bridge.c         |  32 ++++---
 hw/pci-bridge/pci_expander_bridge_stubs.c   |  14 +++
 include/hw/acpi/cxl.h                       |   5 +-
 include/hw/boards.h                         |   3 +-
 include/hw/cxl/cxl.h                        |   9 +-
 include/hw/cxl/cxl_host.h                   |  23 +++++
 include/hw/i386/pc.h                        |   2 +
 include/hw/pci-bridge/pci_expander_bridge.h |  12 +++
 qapi/machine.json                           |  13 +++
 softmmu/vl.c                                |  46 ---------
 tests/data/acpi/q35/CEDT.cxl                | Bin 184 -> 184 bytes
 tests/qtest/bios-tables-test.c              |   4 +-
 tests/qtest/cxl-test.c                      |   4 +-
 21 files changed, 222 insertions(+), 139 deletions(-)
 create mode 100644 hw/pci-bridge/pci_expander_bridge_stubs.c
 create mode 100644 include/hw/cxl/cxl_host.h
 create mode 100644 include/hw/pci-bridge/pci_expander_bridge.h
Signature · 1 line
2.32.0