Skip to contentSkip to conversation

hwmon: (sch56xx-common) Add DMI override table

PATCH Applied Armin Wolf 3 participants 3 messages Jun 4, 2022 – Jun 5, 2022 Hardware monitoring

lore
Share & tools
lore

Armin Wolf

author
#0 lore raw

PATCH 1/1 hwmon: (sch56xx-common) Add DMI override table

Some devices like the Fujitsu Celsius W380 do contain a working sch56xx hardware monitoring device, but do not contain the necessary DMI onboard device.

Do not check for the presence of an suitable onboard device on these machines. The list of affected machines was created using data collected by the Linux Hardware Project.

Tested on a Fujitsu Esprimo P720, but sadly not on a affected machine.

Fixes 393935baa45e (hwmon: (sch56xx-common) Add automatic module loading on supported devices)
---
 drivers/hwmon/sch56xx-common.c | 44 ++++++++++++++++++++++++++--------
 1 file changed, 34 insertions(+), 10 deletions(-)
drivers/hwmon/sch56xx-common.c +34 -10
index 3ece53adabd6..de3a0886c2f7 100644
@@ -523,6 +523,28 @@ static int __init sch56xx_device_add(int address, const char *name)
 	return PTR_ERR_OR_ZERO(sch56xx_pdev);
 }
 
+static const struct dmi_system_id sch56xx_dmi_override_table[] __initconst = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS W380"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO P710"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO E9900"),
+		},
+	},
+	{ }
+};
+
 /* For autoloading only */
 static const struct dmi_system_id sch56xx_dmi_table[] __initconst = {
 	{
@@ -543,16 +565,18 @@ static int __init sch56xx_init(void)
 		if (!dmi_check_system(sch56xx_dmi_table))
 			return -ENODEV;
 
-		/*
-		 * Some machines like the Esprimo P720 and Esprimo C700 have
-		 * onboard devices named " Antiope"/" Theseus" instead of
-		 * "Antiope"/"Theseus", so we need to check for both.
-		 */
-		if (!dmi_find_device(DMI_DEV_TYPE_OTHER, "Antiope", NULL) &&
-		    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Antiope", NULL) &&
-		    !dmi_find_device(DMI_DEV_TYPE_OTHER, "Theseus", NULL) &&
-		    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Theseus", NULL))
-			return -ENODEV;
+		if (!dmi_check_system(sch56xx_dmi_override_table)) {
+			/*
+			 * Some machines like the Esprimo P720 and Esprimo C700 have
+			 * onboard devices named " Antiope"/" Theseus" instead of
+			 * "Antiope"/"Theseus", so we need to check for both.
+			 */
+			if (!dmi_find_device(DMI_DEV_TYPE_OTHER, "Antiope", NULL) &&
+			    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Antiope", NULL) &&
+			    !dmi_find_device(DMI_DEV_TYPE_OTHER, "Theseus", NULL) &&
+			    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Theseus", NULL))
+				return -ENODEV;
+		}
 	}
 
 	/*

--
2.30.2

Reviewed-by on v1 1/1
#1 lore raw

Hi,

Quoted 8 lines · Armin Wolf

Some devices like the Fujitsu Celsius W380 do contain a working sch56xx hardware monitoring device, but do not contain the necessary DMI onboard device.

Do not check for the presence of an suitable onboard device on these machines. The list of affected machines was created using data collected by the Linux Hardware Project.

Quoted 5 lines

Tested on a Fujitsu Esprimo P720, but sadly not on a affected machine.

Fixes 393935baa45e (hwmon: (sch56xx-common) Add automatic module loading on supported devices)

Thanks, patch looks good to me:

Regards,

Hans

Quoted 69 lines
---
 drivers/hwmon/sch56xx-common.c | 44 ++++++++++++++++++++++++++--------
 1 file changed, 34 insertions(+), 10 deletions(-)
drivers/hwmon/sch56xx-common.c +34 -11
index 3ece53adabd6..de3a0886c2f7 100644
@@ -523,6 +523,28 @@ static int __init sch56xx_device_add(int address, const char *name)
 	return PTR_ERR_OR_ZERO(sch56xx_pdev);
 }
 
+static const struct dmi_system_id sch56xx_dmi_override_table[] __initconst = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS W380"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO P710"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO E9900"),
+		},
+	},
+	{ }
+};
+
 /* For autoloading only */
 static const struct dmi_system_id sch56xx_dmi_table[] __initconst = {
 	{
@@ -543,16 +565,18 @@ static int __init sch56xx_init(void)
 		if (!dmi_check_system(sch56xx_dmi_table))
 			return -ENODEV;
 
-		/*
-		 * Some machines like the Esprimo P720 and Esprimo C700 have
-		 * onboard devices named " Antiope"/" Theseus" instead of
-		 * "Antiope"/"Theseus", so we need to check for both.
-		 */
-		if (!dmi_find_device(DMI_DEV_TYPE_OTHER, "Antiope", NULL) &&
-		    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Antiope", NULL) &&
-		    !dmi_find_device(DMI_DEV_TYPE_OTHER, "Theseus", NULL) &&
-		    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Theseus", NULL))
-			return -ENODEV;
+		if (!dmi_check_system(sch56xx_dmi_override_table)) {
+			/*
+			 * Some machines like the Esprimo P720 and Esprimo C700 have
+			 * onboard devices named " Antiope"/" Theseus" instead of
+			 * "Antiope"/"Theseus", so we need to check for both.
+			 */
+			if (!dmi_find_device(DMI_DEV_TYPE_OTHER, "Antiope", NULL) &&
+			    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Antiope", NULL) &&
+			    !dmi_find_device(DMI_DEV_TYPE_OTHER, "Theseus", NULL) &&
+			    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Theseus", NULL))
+				return -ENODEV;
+		}
 	}
 
 	/*
--

2.30.2

maintainer Applied
#2 lore raw
In reply to Armin Wolf
Quoted 8 lines · Armin Wolf

Some devices like the Fujitsu Celsius W380 do contain a working sch56xx hardware monitoring device, but do not contain the necessary DMI onboard device.

Do not check for the presence of an suitable onboard device on these machines. The list of affected machines was created using data collected by the Linux Hardware Project.

Quoted 6 lines

Tested on a Fujitsu Esprimo P720, but sadly not on a affected machine.

Fixes 393935baa45e (hwmon: (sch56xx-common) Add automatic module loading on supported devices)

Applied to hwmon-next.

Thanks,
Guenter

Quoted 69 lines
---
 drivers/hwmon/sch56xx-common.c | 44 ++++++++++++++++++++++++++--------
 1 file changed, 34 insertions(+), 10 deletions(-)

--
2.30.2

drivers/hwmon/sch56xx-common.c +34 -10
index 3ece53adabd6..de3a0886c2f7 100644
@@ -523,6 +523,28 @@ static int __init sch56xx_device_add(int address, const char *name)
 	return PTR_ERR_OR_ZERO(sch56xx_pdev);
 }
 
+static const struct dmi_system_id sch56xx_dmi_override_table[] __initconst = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS W380"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO P710"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO E9900"),
+		},
+	},
+	{ }
+};
+
 /* For autoloading only */
 static const struct dmi_system_id sch56xx_dmi_table[] __initconst = {
 	{
@@ -543,16 +565,18 @@ static int __init sch56xx_init(void)
 		if (!dmi_check_system(sch56xx_dmi_table))
 			return -ENODEV;
 
-		/*
-		 * Some machines like the Esprimo P720 and Esprimo C700 have
-		 * onboard devices named " Antiope"/" Theseus" instead of
-		 * "Antiope"/"Theseus", so we need to check for both.
-		 */
-		if (!dmi_find_device(DMI_DEV_TYPE_OTHER, "Antiope", NULL) &&
-		    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Antiope", NULL) &&
-		    !dmi_find_device(DMI_DEV_TYPE_OTHER, "Theseus", NULL) &&
-		    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Theseus", NULL))
-			return -ENODEV;
+		if (!dmi_check_system(sch56xx_dmi_override_table)) {
+			/*
+			 * Some machines like the Esprimo P720 and Esprimo C700 have
+			 * onboard devices named " Antiope"/" Theseus" instead of
+			 * "Antiope"/"Theseus", so we need to check for both.
+			 */
+			if (!dmi_find_device(DMI_DEV_TYPE_OTHER, "Antiope", NULL) &&
+			    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Antiope", NULL) &&
+			    !dmi_find_device(DMI_DEV_TYPE_OTHER, "Theseus", NULL) &&
+			    !dmi_find_device(DMI_DEV_TYPE_OTHER, " Theseus", NULL))
+				return -ENODEV;
+		}
 	}
 
 	/*