Update Documentation/ cross-references
Subsystems (23)
cover Update Documentation/ cross-references
Hi John,
There were a number of DT binding conversions and other docs change that were not updated. Address them, in order to keep the cross-references on a sane state.
Patch series is against v5.19-rc1 (and applies cleanly on the top of today's -next).
Mauro Carvalho Chehab (23):
dt-bindings: mfd: bd9571mwv: update rohm,bd9571mwv.yaml reference
dt-bindings: interrupt-controller: update brcm,l2-intc.yaml reference
dt-bindings: arm: update vexpress-config.yaml references
dt-bindings: reset: update st,stih407-powerdown.yaml references
dt-bindings: mfd: rk808: update rockchip,rk808.yaml reference
dt-bindings: mmc: exynos-dw-mshc: update samsung,pinctrl.yaml
reference
docs: netdev: update maintainer-netdev.rst reference
docs: filesystems: update netfs-api.rst reference
Documentation: update watch_queue.rst references
Documentation: KVM: update s390-pv.rst reference
Documentation: KVM: update amd-memory-encryption.rst references
Documentation: KVM: update msr.rst reference
Documentation: KVM: update s390-diag.rst reference
MAINTAINERS: update arm,hdlcd.yaml reference
MAINTAINERS: update arm,komeda.yaml reference
MAINTAINERS: update arm,malidp.yaml reference
MAINTAINERS: update cortina,gemini-ethernet.yaml reference
MAINTAINERS: update dongwoon,dw9807-vcm.yaml reference
MAINTAINERS: update maxim,max77693.yaml reference
MAINTAINERS: update snps,axs10x-reset.yaml reference
objtool: update objtool.txt references
ASoC: wm8731: update wlf,wm8731.yaml reference
arch: m68k: q40: README: drop references to IDE driver
.../ABI/testing/sysfs-driver-bd9571mwv-regulator | 2 +- Documentation/admin-guide/kernel-parameters.txt | 2 +- .../bindings/cpufreq/brcm,stb-avs-cpu-freq.txt | 2 +- .../devicetree/bindings/hwmon/vexpress.txt | 2 +- .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 +- .../devicetree/bindings/phy/phy-stih407-usb.txt | 2 +- .../devicetree/bindings/pinctrl/pinctrl-rk805.txt | 2 +- .../devicetree/bindings/regulator/vexpress.txt | 2 +- .../bindings/sound/atmel-sam9x5-wm8731-audio.txt | 2 +- Documentation/devicetree/bindings/usb/dwc3-st.txt | 2 +- Documentation/devicetree/bindings/usb/ehci-st.txt | 2 +- Documentation/devicetree/bindings/usb/ohci-st.txt | 2 +- Documentation/security/keys/core.rst | 2 +- Documentation/security/secrets/coco.rst | 2 +- .../translations/it_IT/networking/netdev-FAQ.rst | 2 +- Documentation/virt/kvm/api.rst | 4 ++-- Documentation/virt/kvm/s390/s390-pv-boot.rst | 2 +- Documentation/virt/kvm/x86/hypercalls.rst | 2 +- Documentation/x86/orc-unwinder.rst | 2 +- MAINTAINERS | 14 +++++++------- arch/m68k/q40/README | 4 +--- include/linux/fscache.h | 2 +- include/linux/objtool.h | 2 +- include/linux/watch_queue.h | 2 +- init/Kconfig | 2 +- kernel/watch_queue.c | 2 +- lib/Kconfig.debug | 2 +- tools/include/linux/objtool.h | 2 +- tools/objtool/check.c | 2 +- 29 files changed, 36 insertions(+), 38 deletions(-)
Signature · 1 line
2.36.1
PATCH 1/23 dt-bindings: mfd: bd9571mwv: update rohm,bd9571mwv.yaml reference
Changeset 983b62975e90 ("dt-bindings: mfd: bd9571mwv: Convert to json-schema")
renamed: Documentation/devicetree/bindings/mfd/bd9571mwv.txt
to: Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator +1 -1
@@ -26,6 +26,6 @@ Description: Read/write the current state of DDR Backup Mode, which controls DDR Backup Mode must be explicitly enabled by the user, to invoke step 1. - See also Documentation/devicetree/bindings/mfd/bd9571mwv.txt. + See also Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml. Users: User space applications for embedded boards equipped with a BD9571MWV PMIC.
Signature · 1 line
2.36.1
Re: [PATCH 01/23] dt-bindings: mfd: bd9571mwv: update rohm,bd9571mwv.yaml reference
Quoted 8 lines · Mauro Carvalho Chehab
Changeset
983b62975e90("dt-bindings: mfd: bd9571mwv: Convert to json-schema")
renamed:Documentation/devicetree/bindings/mfd/bd9571mwv.txt
to:Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml.Update its cross-reference accordingly.
Fixes 983b62975e90 ("dt-bindings: mfd: bd9571mwv: Convert to json-schema")Signed-off-by Mauro Carvalho Chehab <[email protected]>
Mea culpa
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
PATCH 2/23 dt-bindings: interrupt-controller: update brcm,l2-intc.yaml reference
In reply to Mauro Carvalho ChehabChangeset 539d25b21fe8 ("dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML")
renamed: Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
to: Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
.../devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt +1 -1
@@ -16,7 +16,7 @@ has been processed. See [2] for more information on the brcm,l2-intc node. firmware. On some SoCs, this firmware supports DFS and DVFS in addition to Adaptive Voltage Scaling. -[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt +[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml Node brcm,avs-cpu-data-mem
Signature · 1 line
2.36.1
PATCH 3/23 dt-bindings: arm: update vexpress-config.yaml references
In reply to Mauro Carvalho ChehabChangeset 7e8339b5162f ("dt-bindings: arm: convert vexpress-config to DT schema")
renamed: Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
to: Documentation/devicetree/bindings/arm/vexpress-config.yaml.
Update the cross-references accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
Documentation/devicetree/bindings/hwmon/vexpress.txt | 2 +- Documentation/devicetree/bindings/regulator/vexpress.txt | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/hwmon/vexpress.txt +1 -1
@@ -9,7 +9,7 @@ Requires node properties: "arm,vexpress-power" "arm,vexpress-energy" - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg - (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt + (see Documentation/devicetree/bindings/arm/vexpress-config.yaml for more details) Optional node properties:
Documentation/devicetree/bindings/regulator/vexpress.txt +1 -1
@@ -4,7 +4,7 @@ Versatile Express voltage regulators Requires node properties: - "compatible" value: "arm,vexpress-volt" - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg - (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt + (see Documentation/devicetree/bindings/arm/vexpress-config.yaml for more details) Required regulator properties:
Signature · 1 line
2.36.1
Re: [PATCH 03/23] dt-bindings: arm: update vexpress-config.yaml references
Quoted 8 lines · Mauro Carvalho Chehab
Changeset
7e8339b5162f("dt-bindings: arm: convert vexpress-config to DT schema")
renamed:Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
to:Documentation/devicetree/bindings/arm/vexpress-config.yaml.Update the cross-references accordingly.
Fixes 7e8339b5162f ("dt-bindings: arm: convert vexpress-config to DT schema")Signed-off-by Mauro Carvalho Chehab <[email protected]>
Quoted 35 lines
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
Documentation/devicetree/bindings/hwmon/vexpress.txt | 2 +- Documentation/devicetree/bindings/regulator/vexpress.txt | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)Documentation/devicetree/bindings/hwmon/vexpress.txt +1
-1@@ -9,7 +9,7 @@ Requires node properties: "arm,vexpress-power" "arm,vexpress-energy" - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg - (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt + (see Documentation/devicetree/bindings/arm/vexpress-config.yaml for more details) Optional node properties:Documentation/devicetree/bindings/regulator/vexpress.txt +1
-1@@ -4,7 +4,7 @@ Versatile Express voltage regulators Requires node properties: - "compatible" value: "arm,vexpress-volt" - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg - (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt + (see Documentation/devicetree/bindings/arm/vexpress-config.yaml for more details) Required regulator properties:
PATCH 4/23 dt-bindings: reset: update st,stih407-powerdown.yaml references
In reply to Mauro Carvalho ChehabChangeset 2ca065dc9468 ("dt-bindings: reset: st,sti-powerdown: Convert to yaml")
renamed: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
to: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml.
Update the cross-references accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
Documentation/devicetree/bindings/phy/phy-stih407-usb.txt | 2 +- Documentation/devicetree/bindings/usb/dwc3-st.txt | 2 +- Documentation/devicetree/bindings/usb/ehci-st.txt | 2 +- Documentation/devicetree/bindings/usb/ohci-st.txt | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/phy/phy-stih407-usb.txt +1 -1
@@ -9,7 +9,7 @@ Required properties: - resets : list of phandle and reset specifier pairs. There should be two entries, one for the whole phy and one for the port - reset-names : list of reset signal names. Should be "global" and "port" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example:
Documentation/devicetree/bindings/usb/dwc3-st.txt +1 -1
@@ -13,7 +13,7 @@ Required properties: - resets : list of phandle and reset specifier pairs. There should be two entries, one for the powerdown and softreset lines of the usb3 IP - reset-names : list of reset signal names. Names should be "powerdown" and "softreset" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt - #address-cells, #size-cells : should be '1' if the device has sub-nodes
Documentation/devicetree/bindings/usb/ehci-st.txt +1 -1
@@ -17,7 +17,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt - resets : phandle + reset specifier pairs to the powerdown and softreset lines of the USB IP - reset-names : should be "power" and "softreset" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example:
Documentation/devicetree/bindings/usb/ohci-st.txt +1 -1
@@ -15,7 +15,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt - resets : phandle to the powerdown and reset controller for the USB IP - reset-names : should be "power" and "softreset". -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example:
Signature · 1 line
2.36.1
PATCH 5/23 dt-bindings: mfd: rk808: update rockchip,rk808.yaml reference
In reply to Mauro Carvalho ChehabChangeset 6c38ca03406e ("dt-bindings: mfd: rk808: Convert bindings to yaml")
renamed: Documentation/devicetree/bindings/mfd/rk808.txt
to: Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt +1 -1
@@ -27,7 +27,7 @@ Required properties: - pins: List of pins. Valid values of pins properties are: gpio0, gpio1. First 2 properties must be added in the RK805 PMIC node, documented in -Documentation/devicetree/bindings/mfd/rk808.txt +Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml Optional properties: -------------------
Signature · 1 line
2.36.1
PATCH 6/23 dt-bindings: mmc: exynos-dw-mshc: update samsung,pinctrl.yaml reference
In reply to Mauro Carvalho ChehabChangeset af030d83da1d ("dt-bindings: pinctrl: samsung: convert to dtschema")
renamed: bindings/pinctrl/samsung-pinctrl.txt
to: bindings/pinctrl/samsung-pinctrl.yaml, splitting it into multiple files.
Update exynos-dw-mshc.txt accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +1 -1
@@ -64,7 +64,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host) rest of the gpios (depending on the bus-width property) are the data lines in no particular order. The format of the gpio specifier depends on the gpio controller. -(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt) +(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml) Example:
Signature · 1 line
2.36.1
Re: [PATCH 06/23] dt-bindings: mmc: exynos-dw-mshc: update samsung,pinctrl.yaml reference
Quoted 9 lines · Mauro Carvalho Chehab
Changeset
af030d83da1d("dt-bindings: pinctrl: samsung: convert to dtschema")
renamed:bindings/pinctrl/samsung-pinctrl.txt
to:bindings/pinctrl/samsung-pinctrl.yaml, splitting it into multiple files.Update exynos-dw-mshc.txt accordingly.
Fixes af030d83da1d ("dt-bindings: pinctrl: samsung: convert to dtschema")Signed-off-by Mauro Carvalho Chehab <[email protected]>
Commit is okay, but you can also drop it entirely because entire part will be removed with:
https://lore.kernel.org/all/[email protected]/
Best regards,
Krzysztof
Re: [PATCH 06/23] dt-bindings: mmc: exynos-dw-mshc: update samsung,pinctrl.yaml reference
Quoted 6 lines · Krzysztof Kozlowski
Quoted 5 lines · Mauro Carvalho Chehab
Changeset
af030d83da1d("dt-bindings: pinctrl: samsung: convert to dtschema")
renamed:bindings/pinctrl/samsung-pinctrl.txt
to:bindings/pinctrl/samsung-pinctrl.yaml, splitting it into multiple files.
Quoted 8 lines
Quoted 4 lines
Update exynos-dw-mshc.txt accordingly.
Fixes af030d83da1d ("dt-bindings: pinctrl: samsung: convert to dtschema")Signed-off-by Mauro Carvalho Chehab <[email protected]>Commit is okay, but you can also drop it entirely because entire part will be removed with:
https://lore.kernel.org/all/[email protected]/
Which was now applied by Ulf.
Best regards,
Krzysztof
PATCH 7/23 docs: netdev: update maintainer-netdev.rst reference
In reply to Mauro Carvalho ChehabChangeset 8df0136376dc ("docs: netdev: move the netdev-FAQ to the process pages")
renamed: Documentation/networking/netdev-FAQ.rst
to: Documentation/process/maintainer-netdev.rst.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
Documentation/translations/it_IT/networking/netdev-FAQ.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/translations/it_IT/networking/netdev-FAQ.rst +1 -1
@@ -1,6 +1,6 @@ .. include:: ../disclaimer-ita.rst -:Original: :ref:`Documentation/networking/netdev-FAQ.rst <netdev-FAQ>` +:Original: :ref:`Documentation/process/maintainer-netdev.rst <netdev-FAQ>` .. _it_netdev-FAQ:
Signature · 1 line
2.36.1
Re: [PATCH 07/23] docs: netdev: update maintainer-netdev.rst reference
Quoted 8 lines · On Mon, 6 Jun 2022 16:25:29 +0100 Mauro Carvalho Chehab wrote:
Changeset
8df0136376dc("docs: netdev: move the netdev-FAQ to the process pages")
renamed:Documentation/networking/netdev-FAQ.rst
to:Documentation/process/maintainer-netdev.rst.Update its cross-reference accordingly.
Fixes 8df0136376dc ("docs: netdev: move the netdev-FAQ to the process pages")Signed-off-by Mauro Carvalho Chehab <[email protected]>
PATCH 8/23 docs: filesystems: update netfs-api.rst reference
In reply to Mauro Carvalho ChehabChangeset efc930fa1d84 ("docs: filesystems: caching/netfs-api.txt: convert it to ReST")
renamed: Documentation/filesystems/caching/netfs-api.txt
to: Documentation/filesystems/caching/netfs-api.rst.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
include/linux/fscache.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/fscache.h +1 -1
@@ -378,7 +378,7 @@ void fscache_update_cookie(struct fscache_cookie *cookie, const void *aux_data,* * Request that the size of an object be changed. * -* See Documentation/filesystems/caching/netfs-api.txt for a complete +* See Documentation/filesystems/caching/netfs-api.rst for a complete * description. */ static inline
Signature · 1 line
2.36.1
PATCH 9/23 Documentation: update watch_queue.rst references
In reply to Mauro Carvalho ChehabChangeset f5461124d59b ("Documentation: move watch_queue to core-api")
renamed: Documentation/watch_queue.rst
to: Documentation/core-api/watch_queue.rst.
Update the cross-references accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
Documentation/security/keys/core.rst | 2 +- include/linux/watch_queue.h | 2 +- init/Kconfig | 2 +- kernel/watch_queue.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
Documentation/security/keys/core.rst +1 -1
@@ -1046,7 +1046,7 @@ The keyctl syscall functions are: "filter" is either NULL to remove a watch or a filter specification to indicate what events are required from the key. - See Documentation/watch_queue.rst for more information. + See Documentation/core-api/watch_queue.rst for more information. Note that only one watch may be emplaced for any particular { key, queue_fd } combination.
include/linux/watch_queue.h +1 -1
@@ -4,7 +4,7 @@* Copyright (C) 2020 Red Hat, Inc. All Rights Reserved. * Written by David Howells ([email protected]) * -* See Documentation/watch_queue.rst +* See Documentation/core-api/watch_queue.rst */ #ifndef _LINUX_WATCH_QUEUE_H
init/Kconfig +1 -1
@@ -414,7 +414,7 @@ config WATCH_QUEUE with watches for key/keyring change notifications and device notifications. - See Documentation/watch_queue.rst + See Documentation/core-api/watch_queue.rst config CROSS_MEMORY_ATTACH bool "Enable process_vm_readv/writev syscalls"
kernel/watch_queue.c +1 -1
@@ -4,7 +4,7 @@* Copyright (C) 2020 Red Hat, Inc. All Rights Reserved. * Written by David Howells ([email protected]) * -* See Documentation/watch_queue.rst +* See Documentation/core-api/watch_queue.rst */ #define pr_fmt (fmt) "watchq: " fmt
Signature · 1 line
2.36.1
Re: [PATCH 09/23] Documentation: update watch_queue.rst references
Hi Mauro,
Quoted 9 lines · Mauro Carvalho Chehab
Changeset
f5461124d59b("Documentation: movewatch_queueto core-api")
renamed:Documentation/watch_queue.rst
to:Documentation/core-api/watch_queue.rst.Update the cross-references accordingly.
Fixes f5461124d59b ("Documentation: move watch_queue to core-api")Signed-off-by Mauro Carvalho Chehab <[email protected]>---
Oops. Thanks for the update.
Quoted 62 lines
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
Documentation/security/keys/core.rst | 2 +- include/linux/watch_queue.h | 2 +- init/Kconfig | 2 +- kernel/watch_queue.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)Documentation/security/keys/core.rst +1
-1@@ -1046,7 +1046,7 @@ The keyctl syscall functions are: "filter" is either NULL to remove a watch or a filter specification to indicate what events are required from the key. - See Documentation/watch_queue.rst for more information. + See Documentation/core-api/watch_queue.rst for more information. Note that only one watch may be emplaced for any particular { key, queue_fd } combination.include/linux/watch_queue.h +1
-1@@ -4,7 +4,7 @@* Copyright (C) 2020 Red Hat, Inc. All Rights Reserved. * Written by David Howells ([email protected]) * -* See Documentation/watch_queue.rst +* See Documentation/core-api/watch_queue.rst */ #ifndef _LINUX_WATCH_QUEUE_Hinit/Kconfig +1
-1@@ -414,7 +414,7 @@ config WATCH_QUEUE with watches for key/keyring change notifications and device notifications. - See Documentation/watch_queue.rst + See Documentation/core-api/watch_queue.rst config CROSS_MEMORY_ATTACH bool "Enable process_vm_readv/writev syscalls"kernel/watch_queue.c +1
-1@@ -4,7 +4,7 @@* Copyright (C) 2020 Red Hat, Inc. All Rights Reserved. * Written by David Howells ([email protected]) * -* See Documentation/watch_queue.rst +* See Documentation/core-api/watch_queue.rst */ #define pr_fmt (fmt) "watchq: " fmt
Signature · 1 line
~Randy
PATCH 10/23 Documentation: KVM: update s390-pv.rst reference
In reply to Mauro Carvalho ChehabChangesets: daec8d408308 ("Documentation: KVM: add separate directories for architecture-specific documentation")
and: daec8d408308 ("Documentation: KVM: add separate directories for architecture-specific documentation")
renamed: Documentation/virt/kvm/s390-pv.rst
to: Documentation/virt/kvm/s390/s390-pv.rst.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
Documentation/virt/kvm/s390/s390-pv-boot.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/virt/kvm/s390/s390-pv-boot.rst +1 -1
@@ -10,7 +10,7 @@ The memory of Protected Virtual Machines (PVMs) is not accessible to I/O or the hypervisor. In those cases where the hypervisor needs to access the memory of a PVM, that memory must be made accessible. Memory made accessible to the hypervisor will be encrypted. See -Documentation/virt/kvm/s390-pv.rst for details." +Documentation/virt/kvm/s390/s390-pv.rst for details." On IPL (boot) a small plaintext bootloader is started, which provides information about the encrypted components and necessary metadata to
Signature · 1 line
2.36.1
PATCH 11/23 Documentation: KVM: update amd-memory-encryption.rst references
In reply to Mauro Carvalho ChehabChangeset daec8d408308 ("Documentation: KVM: add separate directories for architecture-specific documentation")
renamed: Documentation/virt/kvm/amd-memory-encryption.rst
to: Documentation/virt/kvm/x86/amd-memory-encryption.rst.
Update the cross-references accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
Documentation/admin-guide/kernel-parameters.txt | 2 +- Documentation/security/secrets/coco.rst | 2 +- Documentation/virt/kvm/api.rst | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +1 -1
@@ -3104,7 +3104,7 @@ mem_encrypt=on: Activate SME mem_encrypt=off: Do not activate SME - Refer to Documentation/virt/kvm/amd-memory-encryption.rst + Refer to Documentation/virt/kvm/x86/amd-memory-encryption.rst for details on when memory encryption can be activated. mem_sleep_default= [SUSPEND] Default system suspend mode:
Documentation/security/secrets/coco.rst +1 -1
@@ -98,6 +98,6 @@ References See [sev-api-spec]_ for more info regarding SEV ``LAUNCH_SECRET`` operation. -.. [sev] Documentation/virt/kvm/amd-memory-encryption.rst +.. [sev] Documentation/virt/kvm/x86/amd-memory-encryption.rst .. [secrets-coco-abi] Documentation/ABI/testing/securityfs-secrets-coco .. [sev-api-spec] https://www.amd.com/system/files/TechDocs/55766_SEV-KM_API_Specification.pdf
Documentation/virt/kvm/api.rst +1 -1
@@ -4667,7 +4667,7 @@ encrypted VMs. Currently, this ioctl is used for issuing Secure Encrypted Virtualization (SEV) commands on AMD Processors. The SEV commands are defined in -Documentation/virt/kvm/amd-memory-encryption.rst. +Documentation/virt/kvm/x86/amd-memory-encryption.rst. 4.111 KVM_MEMORY_ENCRYPT_REG_REGION -----------------------------------
Signature · 1 line
2.36.1
PATCH 12/23 Documentation: KVM: update msr.rst reference
In reply to Mauro Carvalho ChehabChangeset daec8d408308 ("Documentation: KVM: add separate directories for architecture-specific documentation")
renamed: Documentation/virt/kvm/msr.rst
to: Documentation/virt/kvm/x86/msr.rst.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
Documentation/virt/kvm/api.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/virt/kvm/api.rst +1 -1
@@ -7670,7 +7670,7 @@ architecture-specific interfaces. This capability and the architecture- specific interfaces must be consistent, i.e. if one says the feature is supported, than the other should as well and vice versa. For arm64 see Documentation/virt/kvm/devices/vcpu.rst "KVM_ARM_VCPU_PVTIME_CTRL". -For x86 see Documentation/virt/kvm/msr.rst "MSR_KVM_STEAL_TIME". +For x86 see Documentation/virt/kvm/x86/msr.rst "MSR_KVM_STEAL_TIME". 8.25 KVM_CAP_S390_DIAG318 -------------------------
Signature · 1 line
2.36.1
PATCH 13/23 Documentation: KVM: update s390-diag.rst reference
In reply to Mauro Carvalho ChehabChangeset daec8d408308 ("Documentation: KVM: add separate directories for architecture-specific documentation")
renamed: Documentation/virt/kvm/s390-diag.rst
to: Documentation/virt/kvm/s390/s390-diag.rst.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
Documentation/virt/kvm/x86/hypercalls.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/virt/kvm/x86/hypercalls.rst +1 -1
@@ -22,7 +22,7 @@ S390: number in R1. For further information on the S390 diagnose call as supported by KVM, - refer to Documentation/virt/kvm/s390-diag.rst. + refer to Documentation/virt/kvm/s390/s390-diag.rst. PowerPC: It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers.
Signature · 1 line
2.36.1
PATCH 14/23 MAINTAINERS: update arm,hdlcd.yaml reference
In reply to Mauro Carvalho ChehabChangeset 36fd2a65bcaf ("dt-bindings: display: convert Arm HDLCD to DT schema")
renamed: Documentation/devicetree/bindings/display/arm,hdlcd.txt
to: Documentation/devicetree/bindings/display/arm,hdlcd.yaml.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
MAINTAINERS +1 -1
@@ -1507,7 +1507,7 @@ F: drivers/clocksource/arm_arch_timer.c ARM HDLCD DRM DRIVER M: Liviu Dudau <[email protected]> S: Supported -F: Documentation/devicetree/bindings/display/arm,hdlcd.txt +F: Documentation/devicetree/bindings/display/arm,hdlcd.yaml F: drivers/gpu/drm/arm/hdlcd_* ARM INTEGRATOR, VERSATILE AND REALVIEW SUPPORT
Signature · 1 line
2.36.1
Re: [PATCH 14/23] MAINTAINERS: update arm,hdlcd.yaml reference
On Mon, 6 Jun 2022 16:25:36 +0100
Mauro Carvalho Chehab <[email protected]> wrote:
Hi Mauro,
Quoted 5 lines
Changeset
36fd2a65bcaf("dt-bindings: display: convert Arm HDLCD to DT schema")
renamed:Documentation/devicetree/bindings/display/arm,hdlcd.txt
to:Documentation/devicetree/bindings/display/arm,hdlcd.yaml.Update its cross-reference accordingly.
So Lukas sent the same thing already last week:
https://lore.kernel.org/linux-kernel/[email protected]/
His patch covered all of the three ARM display updates (14, 15, 16/23 in this series) in one go.
Not sure where to go from here, or if Lukas' patch already made it somewhere.
If we go ahead with this series instead, please feel free to copy my ACK from the other patch.
Cheers,
Andre
Quoted 23 lines
Fixes 36fd2a65bcaf ("dt-bindings: display: convert Arm HDLCD to DT schema")Signed-off-by Mauro Carvalho Chehab <[email protected]>---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)MAINTAINERS +1
-1@@ -1507,7 +1507,7 @@ F: drivers/clocksource/arm_arch_timer.c ARM HDLCD DRM DRIVER M: Liviu Dudau <[email protected]> S: Supported -F: Documentation/devicetree/bindings/display/arm,hdlcd.txt +F: Documentation/devicetree/bindings/display/arm,hdlcd.yaml F: drivers/gpu/drm/arm/hdlcd_* ARM INTEGRATOR, VERSATILE AND REALVIEW SUPPORT
Rob Herring
maintainerRe: [PATCH 14/23] MAINTAINERS: update arm,hdlcd.yaml reference
Quoted 11 lines · Andre Przywara
On Mon, 6 Jun 2022 16:25:36 +0100
Mauro Carvalho Chehab <[email protected]> wrote:Hi Mauro,
Quoted 5 lines
Changeset
36fd2a65bcaf("dt-bindings: display: convert Arm HDLCD to DT schema")
renamed:Documentation/devicetree/bindings/display/arm,hdlcd.txt
to:Documentation/devicetree/bindings/display/arm,hdlcd.yaml.Update its cross-reference accordingly.
Quoted 7 lines
So Lukas sent the same thing already last week:
https://lore.kernel.org/linux-kernel/[email protected]/His patch covered all of the three ARM display updates (14, 15, 16/23 in this series) in one go.
Not sure where to go from here, or if Lukas' patch already made it somewhere.
I'll apply that one.
Rob
PATCH 15/23 MAINTAINERS: update arm,komeda.yaml reference
In reply to Mauro Carvalho ChehabChangeset 0f6983509ea1 ("dt-bindings: display: convert Arm Komeda to DT schema")
renamed: Documentation/devicetree/bindings/display/arm,komeda.txt
to: Documentation/devicetree/bindings/display/arm,komeda.yaml.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
MAINTAINERS +1 -1
@@ -1542,7 +1542,7 @@ M: Mihail Atanassov <[email protected]> L: Mali DP Maintainers <[email protected]> S: Supported T: git git://anongit.freedesktop.org/drm/drm-misc -F: Documentation/devicetree/bindings/display/arm,komeda.txt +F: Documentation/devicetree/bindings/display/arm,komeda.yaml F: Documentation/gpu/komeda-kms.rst F: drivers/gpu/drm/arm/display/include/ F: drivers/gpu/drm/arm/display/komeda/
Signature · 1 line
2.36.1
PATCH 16/23 MAINTAINERS: update arm,malidp.yaml reference
In reply to Mauro Carvalho ChehabChangeset 2c8b082a3ab1 ("dt-bindings: display: convert Arm Mali-DP to DT schema")
renamed: Documentation/devicetree/bindings/display/arm,malidp.txt
to: Documentation/devicetree/bindings/display/arm,malidp.yaml.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
MAINTAINERS +1 -1
@@ -1564,7 +1564,7 @@ M: Brian Starkey <[email protected]> L: Mali DP Maintainers <[email protected]> S: Supported T: git git://anongit.freedesktop.org/drm/drm-misc -F: Documentation/devicetree/bindings/display/arm,malidp.txt +F: Documentation/devicetree/bindings/display/arm,malidp.yaml F: Documentation/gpu/afbc.rst F: drivers/gpu/drm/arm/
Signature · 1 line
2.36.1
PATCH 17/23 MAINTAINERS: update cortina,gemini-ethernet.yaml reference
In reply to Mauro Carvalho ChehabChangeset 208b65f7b5cc ("dt-bindings: net: convert net/cortina,gemini-ethernet to yaml")
renamed: Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
to: Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
MAINTAINERS +1 -1
@@ -2009,7 +2009,7 @@ L: [email protected] (moderated for non-subscribers) S: Maintained T: git git://github.com/ulli-kroll/linux.git F: Documentation/devicetree/bindings/arm/gemini.yaml -F: Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt +F: Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml F: Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt F: Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml F: arch/arm/boot/dts/gemini*
Signature · 1 line
2.36.1
Re: [PATCH 17/23] MAINTAINERS: update cortina,gemini-ethernet.yaml reference
Quoted 8 lines · Mauro Carvalho Chehab
Changeset
208b65f7b5cc("dt-bindings: net: convertnet/cortina,gemini-ethernetto yaml")
renamed:Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
to:Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml.Update its cross-reference accordingly.
Fixes 208b65f7b5cc ("dt-bindings: net: convert net/cortina,gemini-ethernet to yaml")Signed-off-by Mauro Carvalho Chehab <[email protected]>
Yours,
Linus Walleij
PATCH 18/23 MAINTAINERS: update dongwoon,dw9807-vcm.yaml reference
In reply to Mauro Carvalho ChehabChangeset a1f4626b282d ("media: dt-bindings: Convert Dongwoon dw9807-vcm bindings to json-schema")
renamed: Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
to: Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
MAINTAINERS +1 -1
@@ -6078,7 +6078,7 @@ M: Sakari Ailus <[email protected]> L: [email protected] S: Maintained T: git git://linuxtv.org/media_tree.git -F: Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt +F: Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml F: drivers/media/i2c/dw9807-vcm.c DOUBLETALK DRIVER
Signature · 1 line
2.36.1
PATCH 19/23 MAINTAINERS: update maxim,max77693.yaml reference
In reply to Mauro Carvalho ChehabChangeset b38213c6118b ("dt-bindings: mfd: maxim,max77693: Convert to dtschema")
renamed: Documentation/devicetree/bindings/mfd/max77693.txt
to: Documentation/devicetree/bindings/mfd/maxim,max77693.yaml.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
MAINTAINERS +1 -1
@@ -12118,7 +12118,7 @@ F: Documentation/devicetree/bindings/*/maxim,max77686.yaml F: Documentation/devicetree/bindings/*/maxim,max77693.yaml F: Documentation/devicetree/bindings/*/maxim,max77843.yaml F: Documentation/devicetree/bindings/clock/maxim,max77686.txt -F: Documentation/devicetree/bindings/mfd/max77693.txt +F: Documentation/devicetree/bindings/mfd/maxim,max77693.yaml F: drivers/*/*max77843.c F: drivers/*/max14577*.c F: drivers/*/max77686*.c
Signature · 1 line
2.36.1
Re: [PATCH 19/23] MAINTAINERS: update maxim,max77693.yaml reference
Quoted 7 lines · Mauro Carvalho Chehab
Changeset
b38213c6118b("dt-bindings: mfd: maxim,max77693: Convert to dtschema")
renamed:Documentation/devicetree/bindings/mfd/max77693.txt
to:Documentation/devicetree/bindings/mfd/maxim,max77693.yaml.Update its cross-reference accordingly.
Fixes b38213c6118b ("dt-bindings: mfd: maxim,max77693: Convert to dtschema")
I look at that commit and it performs proper update of Maintainers file. It is not the commit which introduced the issue, so the fixes tag is wrong.
The commit which introduced the issue is I think within Lee's branches:
'ib-mfd-iio-5.18', 'ib-mfd-led-power-regulator-5.18', 'ib-mfd-mediatek-mt6366-5.18', 'ib-mfd-rtc-watchdog-5.18' and 'ib-mfd-spi-dt-5.18' into ibs-for-mfd-merged")
Quoted 14 lines
Signed-off-by Mauro Carvalho Chehab <[email protected]>---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)MAINTAINERS +0
-0
MAINTAINERS F: Documentation/devicetree/bindings/*/maxim,max77686.yaml · line 12121
Quoted 5 lines
MAINTAINERS +1
-1@@ -12118,7 +12118,7 @@ F: Documentation/devicetree/bindings/*/maxim,max77686.yaml F: Documentation/devicetree/bindings/*/maxim,max77693.yaml F: Documentation/devicetree/bindings/*/maxim,max77843.yaml F: Documentation/devicetree/bindings/clock/maxim,max77686.txt -F: Documentation/devicetree/bindings/mfd/max77693.txt +F: Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
This "+" is not correct. The entry is already properly covered.
Just remove the max77693.txt.
Best regards,
Krzysztof
PATCH 20/23 MAINTAINERS: update snps,axs10x-reset.yaml reference
In reply to Mauro Carvalho ChehabChangeset 820f722c05dd ("dt-bindings: reset: snps,axs10x-reset: Convert to yaml")
renamed: Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
to: Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
MAINTAINERS +1 -1
@@ -19220,7 +19220,7 @@ F: arch/arc/plat-axs10x SYNOPSYS AXS10x RESET CONTROLLER DRIVER M: Eugeniy Paltsev <[email protected]> S: Supported -F: Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt +F: Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml F: drivers/reset/reset-axs10x.c SYNOPSYS CREG GPIO DRIVER
Signature · 1 line
2.36.1
PATCH 21/23 objtool: update objtool.txt references
In reply to Mauro Carvalho ChehabChangeset a8e35fece49b ("objtool: Update documentation")
renamed: tools/objtool/Documentation/stack-validation.txt
to: tools/objtool/Documentation/objtool.txt.
Update the cross-references accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
Documentation/x86/orc-unwinder.rst | 2 +- include/linux/objtool.h | 2 +- lib/Kconfig.debug | 2 +- tools/include/linux/objtool.h | 2 +- tools/objtool/check.c | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-)
Documentation/x86/orc-unwinder.rst +1 -1
@@ -140,7 +140,7 @@ Unwinder implementation details Objtool generates the ORC data by integrating with the compile-time stack metadata validation feature, which is described in detail in -tools/objtool/Documentation/stack-validation.txt. After analyzing all +tools/objtool/Documentation/objtool.txt. After analyzing all the code paths of a .o file, it creates an array of orc_entry structs, and a parallel array of instruction addresses associated with those structs, and writes them to the .orc_unwind and .orc_unwind_ip sections
include/linux/objtool.h +1 -1
@@ -62,7 +62,7 @@ struct unwind_hint {* It should only be used in special cases where you're 100% sure it won't * affect the reliability of frame pointers and kernel stack traces. * -* For more information, see tools/objtool/Documentation/stack-validation.txt. +* For more information, see tools/objtool/Documentation/objtool.txt. */ #define STACK_FRAME_NON_STANDARD (func) \ static void __used __section(".discard.func_stack_frame_non_standard") \
lib/Kconfig.debug +1 -1
@@ -498,7 +498,7 @@ config STACK_VALIDATION runtime stack traces are more reliable. For more information, see - tools/objtool/Documentation/stack-validation.txt. + tools/objtool/Documentation/objtool.txt. config NOINSTR_VALIDATION bool
tools/include/linux/objtool.h +1 -1
@@ -62,7 +62,7 @@ struct unwind_hint {* It should only be used in special cases where you're 100% sure it won't * affect the reliability of frame pointers and kernel stack traces. * -* For more information, see tools/objtool/Documentation/stack-validation.txt. +* For more information, see tools/objtool/Documentation/objtool.txt. */ #define STACK_FRAME_NON_STANDARD (func) \ static void __used __section(".discard.func_stack_frame_non_standard") \
tools/objtool/check.c +1 -1
@@ -3190,7 +3190,7 @@ static struct instruction *next_insn_to_validate(struct objtool_file *file,* Follow the branch starting at the given instruction, and recursively follow * any other branches (jumps). Meanwhile, track the frame pointer state at * each instruction and validate all the rules described in -* tools/objtool/Documentation/stack-validation.txt. +* tools/objtool/Documentation/objtool.txt. */ static int validate_branch (struct objtool_file *file,struct symbol *func,struct instruction *insn,struct insn_state state)
Signature · 1 line
2.36.1
PATCH 22/23 ASoC: wm8731: update wlf,wm8731.yaml reference
In reply to Mauro Carvalho ChehabChangeset 0e336eeaf467 ("ASoC: wm8731: Convert DT bindings to YAML format")
renamed: Documentation/devicetree/bindings/sound/wm8731.txt
to: Documentation/devicetree/bindings/sound/wlf,wm8731.yaml.
Update its cross-reference accordingly.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
.../devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt +1 -1
@@ -16,7 +16,7 @@ Board connectors: * Line In Jack wm8731 pins: -cf Documentation/devicetree/bindings/sound/wm8731.txt +cf Documentation/devicetree/bindings/sound/wlf,wm8731.yaml Example: sound {
Signature · 1 line
2.36.1
Re: [PATCH 22/23] ASoC: wm8731: update wlf,wm8731.yaml reference
Quoted 8 lines · Mauro Carvalho Chehab
Changeset
0e336eeaf467("ASoC: wm8731: Convert DT bindings to YAML format")
renamed:Documentation/devicetree/bindings/sound/wm8731.txt
to:Documentation/devicetree/bindings/sound/wlf,wm8731.yaml.Update its cross-reference accordingly.
Fixes 0e336eeaf467 ("ASoC: wm8731: Convert DT bindings to YAML format")Signed-off-by Mauro Carvalho Chehab <[email protected]>
Quoted 8 lines
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
.../devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Re: [PATCH 22/23] ASoC: wm8731: update wlf,wm8731.yaml reference
In reply to Mauro Carvalho ChehabQuoted 9 lines · Mauro Carvalho Chehab
Changeset
0e336eeaf467("ASoC: wm8731: Convert DT bindings to YAML format")
renamed:Documentation/devicetree/bindings/sound/wm8731.txt
to:Documentation/devicetree/bindings/sound/wlf,wm8731.yaml.Update its cross-reference accordingly.
Fixes 0e336eeaf467 ("ASoC: wm8731: Convert DT bindings to YAML format")Signed-off-by Mauro Carvalho Chehab <[email protected]>---
Thanks,
Charles
PATCH 23/23 arch: m68k: q40: README: drop references to IDE driver
In reply to Mauro Carvalho ChehabSince IDE support was deleted by Christoph Hellwig <[email protected]>, Jun 16 2021, drop the left-over from README file.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
arch/m68k/q40/README | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
arch/m68k/q40/README +1 -3
@@ -30,9 +30,7 @@ drivers used by the Q40, apart from the very obvious (console etc.): genrtc.c # RTC char/joystick/* # most of this should work, not # in default config.in - block/q40ide.c # startup for ide - ide* # see Documentation/ide/ide.rst - floppy.c # normal PC driver, DMA emu in asm/floppy.h + block/floppy.c # normal PC driver, DMA emu in asm/floppy.h # and arch/m68k/kernel/entry.S # see drivers/block/README.fd net/ne.c
Signature · 1 line
2.36.1
Re: [PATCH 23/23] arch: m68k: q40: README: drop references to IDE driver
Quoted 5 lines · Mauro Carvalho Chehab
Since IDE support was deleted by Christoph Hellwig <[email protected]>, Jun 16 2021, drop the left-over from README file.
Fixes b7fb14d3ac63 ("ide: remove the legacy ide driver")Signed-off-by Mauro Carvalho Chehab <[email protected]>
Thanks.
Quoted 23 lines
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
arch/m68k/q40/README | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)arch/m68k/q40/README +1
-3@@ -30,9 +30,7 @@ drivers used by the Q40, apart from the very obvious (console etc.): genrtc.c # RTC char/joystick/* # most of this should work, not # in default config.in - block/q40ide.c # startup for ide - ide* # see Documentation/ide/ide.rst - floppy.c # normal PC driver, DMA emu in asm/floppy.h + block/floppy.c # normal PC driver, DMA emu in asm/floppy.h # and arch/m68k/kernel/entry.S # see drivers/block/README.fd net/ne.c
Signature · 1 line
~Randy
Geert Uytterhoeven
maintainerRe: [PATCH 23/23] arch: m68k: q40: README: drop references to IDE driver
In reply to Mauro Carvalho ChehabHi Mauro,
Thanks for your patch!
Quoted 2 lines · Mauro Carvalho Chehab
Since IDE support was deleted by Christoph Hellwig <[email protected]>, Jun 16 2021, drop the left-over from README file.
This is only half of the story, cfr. commit 44b1fbc0f5f30e66 ("m68k/q40:
Replace q40ide driver with pata_falcon and falconide").
Quoted 1 line
Fixes b7fb14d3ac63 ("ide: remove the legacy ide driver")
Hence this Fixes tag should be dropped...
Quoted 14 lines
Signed-off-by Mauro Carvalho Chehab <[email protected]>---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/[email protected]/
arch/m68k/q40/README | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)arch/m68k/q40/README +0
-0
arch/m68k/q40/README drivers used by the Q40, apart from the very obvious (console etc.): · line 34
Quoted 5 lines
arch/m68k/q40/README +0
-2@@ -30,9 +30,7 @@ drivers used by the Q40, apart from the very obvious (console etc.): genrtc.c # RTC char/joystick/* # most of this should work, not # in default config.in - block/q40ide.c # startup for ide - ide* # see Documentation/ide/ide.rst
... and the above should be replaced by ata/pata_falcon.c. There doesn't seem to be an ATA replacement for Documentation/ide/ide.rst?
arch/m68k/q40/README drivers used by the Q40, apart from the very obvious (console etc.): · line 36
Quoted 5 lines
arch/m68k/q40/README +1
-1- floppy.c # normal PC driver, DMA emu in asm/floppy.h + block/floppy.c # normal PC driver, DMA emu in asm/floppy.h # and arch/m68k/kernel/entry.S # see drivers/block/README.fd net/ne.c
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Rob Herring
maintainerQuoted 26 lines · Mauro Carvalho Chehab
Hi John,
There were a number of DT binding conversions and other docs change that were not updated. Address them, in order to keep the cross-references on a sane state.
Patch series is against v5.19-rc1 (and applies cleanly on the top of today's -next).
Mauro Carvalho Chehab (23):
dt-bindings: mfd: bd9571mwv: update rohm,bd9571mwv.yaml reference
dt-bindings: interrupt-controller: update brcm,l2-intc.yaml reference
dt-bindings: arm: updatevexpress-config.yamlreferences
dt-bindings: reset: update st,stih407-powerdown.yaml references
dt-bindings: mfd: rk808: update rockchip,rk808.yaml reference
dt-bindings: mmc: exynos-dw-mshc: update samsung,pinctrl.yaml
reference
docs: netdev: updatemaintainer-netdev.rstreference
docs: filesystems: updatenetfs-api.rstreference
Documentation: updatewatch_queue.rstreferences
Documentation: KVM: updates390-pv.rstreference
Documentation: KVM: updateamd-memory-encryption.rstreferences
Documentation: KVM: updatemsr.rstreference
Documentation: KVM: updates390-diag.rstreference
MAINTAINERS: update arm,hdlcd.yaml reference
MAINTAINERS: update arm,komeda.yaml reference
Quoted 8 lines
MAINTAINERS: update arm,malidp.yaml reference
MAINTAINERS: update cortina,gemini-ethernet.yaml reference
MAINTAINERS: update dongwoon,dw9807-vcm.yaml reference
MAINTAINERS: update maxim,max77693.yaml reference
MAINTAINERS: update snps,axs10x-reset.yaml reference
objtool: update objtool.txt references
ASoC: wm8731: update wlf,wm8731.yaml reference
arch: m68k: q40: README: drop references to IDE driver
Applied patches 1-5,17,18,20
Signature · 3 lines
linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
Mark Brown
maintainerRe: (subset) [PATCH 00/23] Update Documentation/ cross-references
In reply to Mauro Carvalho ChehabQuoted 8 lines · Mauro Carvalho Chehab
There were a number of DT binding conversions and other docs change that were not updated. Address them, in order to keep the cross-references on a sane state.
Patch series is against v5.19-rc1 (and applies cleanly on the top of today's -next).
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[22/23] ASoC: wm8731: update wlf,wm8731.yaml reference
commit: 69c8027c5ff43d68449fda4510a8cce70e8578b0
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark