drm/panel: Use backlight helpers
Subsystems (3)
cover drm/panel: Use backlight helpers
backlight_properties.fb_blank is deprecated. The states it represents are handled by other properties; but instead of accessing those properties directly, drivers should use the helpers provided by backlight.h.
This will ultimately allow fb_blank to be removed.
Stephen Kitt (3):
drm/panel: Use backlight helper drm/panel: panel-dsi-cm: Use backlight helpers drm/panel: sony-acx565akm: Use backlight helpers
.../drm/panel/panel-asus-z00t-tm5p5-n35596.c | 7 +----- drivers/gpu/drm/panel/panel-dsi-cm.c | 24 ++++--------------- drivers/gpu/drm/panel/panel-sony-acx565akm.c | 11 ++------- 3 files changed, 7 insertions(+), 35 deletions(-)
base-commit: f2906aa863381afb0015a9eb7fefad885d4e5a56
Signature · 1 line
2.30.2
PATCH 1/3 drm/panel: Use backlight helper
Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes.
--- drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c +1 -6
@@ -215,14 +215,9 @@ static const struct drm_panel_funcs tm5p5_nt35596_panel_funcs = {static int tm5p5_nt35596_bl_update_status (struct backlight_device *bl) {struct mipi_dsi_device *dsi =bl_get_data (bl); -u16 brightness = bl->props.brightness; +u16 brightness =backlight_get_brightness (bl);int ret; -if (bl->props.power !=FB_BLANK_UNBLANK || - bl->props.fb_blank !=FB_BLANK_UNBLANK || - bl->props.state & (BL_CORE_SUSPENDED |BL_CORE_FBBLANK )) - brightness =0 ; - dsi->mode_flags &= ~MIPI_DSI_MODE_LPM ; ret =mipi_dsi_dcs_set_display_brightness (dsi, brightness);
Signature · 1 line
2.30.2
PATCH 2/3 drm/panel: panel-dsi-cm: Use backlight helpers
In reply to Stephen KittInstead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes.
Instead of setting the power state by manually updating fields in struct backlight_properties, use backlight_enable() and backlight_disable(). These also call backlight_update_status() so the separate call is no longer needed.
--- drivers/gpu/drm/panel/panel-dsi-cm.c | 24 ++++-------------------- 1 file changed, 4 insertions(+), 20 deletions(-)
drivers/gpu/drm/panel/panel-dsi-cm.c +4 -20
@@ -86,16 +86,10 @@ static void dsicm_bl_power(struct panel_drv_data *ddata, bool enable)return ;if (enable) { - backlight->props.fb_blank =FB_BLANK_UNBLANK ; - backlight->props.state = ~(BL_CORE_FBBLANK |BL_CORE_SUSPENDED ); - backlight->props.power =FB_BLANK_UNBLANK ; +backlight_enable (backlight); }else { - backlight->props.fb_blank =FB_BLANK_NORMAL ; - backlight->props.power =FB_BLANK_POWERDOWN ; - backlight->props.state |=BL_CORE_FBBLANK |BL_CORE_SUSPENDED ; +backlight_disable (backlight); } - -backlight_update_status (backlight); }static void hw_guard_start (struct panel_drv_data *ddata,int guard_msec)
@@ -196,13 +190,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev) {struct panel_drv_data *ddata =dev_get_drvdata (&dev->dev);int r =0 ; -int level; - -if (dev->props.fb_blank ==FB_BLANK_UNBLANK && - dev->props.power ==FB_BLANK_UNBLANK ) - level = dev->props.brightness; -else - level =0 ; +int level =backlight_get_brightness (dev);dev_dbg (&ddata->dsi->dev,"update brightness to %d\n" , level);
@@ -219,11 +207,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev)static int dsicm_bl_get_intensity (struct backlight_device *dev) { -if (dev->props.fb_blank ==FB_BLANK_UNBLANK && - dev->props.power ==FB_BLANK_UNBLANK ) -return dev->props.brightness; - -return 0 ; +return backlight_get_brightness (dev); }static const struct backlight_ops dsicm_bl_ops = {
Signature · 1 line
2.30.2
Re: [PATCH 2/3] drm/panel: panel-dsi-cm: Use backlight helpers
Hi,
Quoted 29 lines · Stephen Kitt
Instead of retrieving the backlight brightness in struct
backlight_propertiesmanually, and then checking whether the backlight should be on at all, usebacklight_get_brightness()which does all this and insulates this from future changes.Instead of setting the power state by manually updating fields in struct
backlight_properties, usebacklight_enable()andbacklight_disable(). These also callbacklight_update_status()so the separate call is no longer needed.Signed-off-by Stephen Kitt <[email protected]>Cc Thierry Reding <[email protected]>Cc Sam Ravnborg <[email protected]>Cc David Airlie <[email protected]>Cc Daniel Vetter <[email protected]>---
drivers/gpu/drm/panel/panel-dsi-cm.c | 24 ++++-------------------- 1 file changed, 4 insertions(+), 20 deletions(-)drivers/gpu/drm/panel/panel-dsi-cm.c +0
-0@@ -86,16 +86,10 @@ static void dsicm_bl_power(struct panel_drv_data *ddata, bool enable)return ;if (enable) {
drivers/gpu/drm/panel/panel-dsi-cm.c static void dsicm_bl_power(struct panel_drv_data *ddata, bool enable) · line 92
Quoted 10 lines
drivers/gpu/drm/panel/panel-dsi-cm.c +2
-6- backlight->props.fb_blank =FB_BLANK_UNBLANK ; - backlight->props.state = ~(BL_CORE_FBBLANK |BL_CORE_SUSPENDED ); - backlight->props.power =FB_BLANK_UNBLANK ; +backlight_enable (backlight); }else { - backlight->props.fb_blank =FB_BLANK_NORMAL ; - backlight->props.power =FB_BLANK_POWERDOWN ; - backlight->props.state |=BL_CORE_FBBLANK |BL_CORE_SUSPENDED ; +backlight_disable (backlight); }
The brackets can be removed now. Otherwise:
-- Sebastian
Quoted 36 lines
drivers/gpu/drm/panel/panel-dsi-cm.c +2
-14- -backlight_update_status (backlight); }static void hw_guard_start (struct panel_drv_data *ddata,int guard_msec)@@ -196,13 +190,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev) {struct panel_drv_data *ddata =dev_get_drvdata (&dev->dev);int r =0 ; -int level; - -if (dev->props.fb_blank ==FB_BLANK_UNBLANK && - dev->props.power ==FB_BLANK_UNBLANK ) - level = dev->props.brightness; -else - level =0 ; +int level =backlight_get_brightness (dev);dev_dbg (&ddata->dsi->dev,"update brightness to %d\n" , level);@@ -219,11 +207,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev)static int dsicm_bl_get_intensity (struct backlight_device *dev) { -if (dev->props.fb_blank ==FB_BLANK_UNBLANK && - dev->props.power ==FB_BLANK_UNBLANK ) -return dev->props.brightness; - -return 0 ; +return backlight_get_brightness (dev); }static const struct backlight_ops dsicm_bl_ops = {Signature · 1 line
2.30.2
Re: [PATCH 2/3] drm/panel: panel-dsi-cm: Use backlight helpers
Hi Sebastian,
Quoted 25 lines · Sebastian Reichel
Quoted 10 lines · Stephen Kitt
(quoted diff) +0
-0
b/drivers/gpu/drm/panel/panel-dsi-cm.cindexb58cb064975f..aa36dc6cedd3100644 ---a/drivers/gpu/drm/panel/panel-dsi-cm.c
+++b/drivers/gpu/drm/panel/panel-dsi-cm.cdrivers/gpu/drm/panel/panel-dsi-cm.c +0
-2@@ -86,16 +86,10 @@ static void dsicm_bl_power(struct panel_drv_data *ddata, bool enable) return;if (enable) { - backlight->props.fb_blank =FB_BLANK_UNBLANK ; - backlight->props.state = ~(BL_CORE_FBBLANK |drivers/gpu/drm/panel/panel-dsi-cm.c static void dsicm_bl_power(struct panel_drv_data · line 94
Quoted 10 lines
drivers/gpu/drm/panel/panel-dsi-cm.c +2
-4BL_CORE_SUSPENDED); - backlight->props.power =FB_BLANK_UNBLANK ; +backlight_enable (backlight); }else { - backlight->props.fb_blank =FB_BLANK_NORMAL ; - backlight->props.power =FB_BLANK_POWERDOWN ; - backlight->props.state |=BL_CORE_FBBLANK |BL_CORE_SUSPENDED ; +backlight_disable (backlight); }The brackets can be removed now. Otherwise:
Quoted 1 line
Reviewed-by Sebastian Reichel <[email protected]>
Thanks, I’ll wait a little more to see if there are any other reviews of the patches and then push a v2 with that fix.
Regards,
Stephen
Re: [PATCH 2/3] drm/panel: panel-dsi-cm: Use backlight helpers
Hi Stephen.
Quoted 29 lines · Stephen Kitt
Hi Sebastian,
Quoted 25 lines · Sebastian Reichel
Quoted 10 lines · Stephen Kitt
(quoted diff) +0
-0
b/drivers/gpu/drm/panel/panel-dsi-cm.cindexb58cb064975f..aa36dc6cedd3100644 ---a/drivers/gpu/drm/panel/panel-dsi-cm.c
+++b/drivers/gpu/drm/panel/panel-dsi-cm.cdrivers/gpu/drm/panel/panel-dsi-cm.c +0
-2@@ -86,16 +86,10 @@ static void dsicm_bl_power(struct panel_drv_data *ddata, bool enable) return;if (enable) { - backlight->props.fb_blank =FB_BLANK_UNBLANK ; - backlight->props.state = ~(BL_CORE_FBBLANK |drivers/gpu/drm/panel/panel-dsi-cm.c static void dsicm_bl_power(struct panel_drv_data · line 94
Quoted 10 lines
drivers/gpu/drm/panel/panel-dsi-cm.c +2
-4BL_CORE_SUSPENDED); - backlight->props.power =FB_BLANK_UNBLANK ; +backlight_enable (backlight); }else { - backlight->props.fb_blank =FB_BLANK_NORMAL ; - backlight->props.power =FB_BLANK_POWERDOWN ; - backlight->props.state |=BL_CORE_FBBLANK |BL_CORE_SUSPENDED ; +backlight_disable (backlight); }The brackets can be removed now. Otherwise:
Quoted 4 lines
Quoted 1 line
Reviewed-by Sebastian Reichel <[email protected]>Thanks, I’ll wait a little more to see if there are any other reviews of the patches and then push a v2 with that fix.
It would be very nice if you could kill all uses of FB_BLANK in the drivers/gpu/drm/panel/* drivers, and post them as one series. This is long overdue to introduce the backlight helpers.
The three you posted is already a nice step forward, and there may be more panel drivers I have missed.
Sam
Re: [PATCH 2/3] drm/panel: panel-dsi-cm: Use backlight helpers
Quoted 33 lines · Sam Ravnborg
Hi Stephen.
Quoted 31 lines · Stephen Kitt
Hi Sebastian,
Quoted 26 lines · Sebastian Reichel
Quoted 18 lines · Stephen Kitt
(quoted diff) +0
-0
b/drivers/gpu/drm/panel/panel-dsi-cm.cindexb58cb064975f..aa36dc6cedd3100644 ---a/drivers/gpu/drm/panel/panel-dsi-cm.c+++b/drivers/gpu/drm/panel/panel-dsi-cm.c@@ -86,16 +86,10 @@ static voiddsicm_bl_power(struct panel_drv_data *ddata, bool enable)return;drivers/gpu/drm/panel/panel-dsi-cm.c +0
-2if (enable) { - backlight->props.fb_blank =FB_BLANK_UNBLANK ; - backlight->props.state = ~(BL_CORE_FBBLANK |
BL_CORE_SUSPENDED);drivers/gpu/drm/panel/panel-dsi-cm.c +1
-4- backlight->props.power =FB_BLANK_UNBLANK ; +backlight_enable (backlight); }else { - backlight->props.fb_blank =FB_BLANK_NORMAL ; - backlight->props.power =FB_BLANK_POWERDOWN ; - backlight->props.state |= BL_CORE_FBBLANK |
BL_CORE_SUSPENDED;drivers/gpu/drm/panel/panel-dsi-cm.c static void dsicm_bl_power(struct panel_drv_data *ddata, bool enable) · line 92
Quoted 2 lines
drivers/gpu/drm/panel/panel-dsi-cm.c +1
-0+backlight_disable (backlight); }The brackets can be removed now. Otherwise:
Reviewed-by Sebastian Reichel <[email protected]>
Quoted 8 lines
Quoted 2 lines
Thanks, I’ll wait a little more to see if there are any other reviews of the patches and then push a v2 with that fix.
It would be very nice if you could kill all uses of
FB_BLANKin thedrivers/gpu/drm/panel/*drivers, and post them as one series. This is long overdue to introduce the backlight helpers.The three you posted is already a nice step forward, and there may be more panel drivers I have missed.
With this series on top of 5.19-rc1, the only remaining .fb_blank reference is in acx565akm_backlight_init() in panel-sony-acx565akm.c; I was planning on nuking that along with the other .fb_blank initialisers in a series removing .fb_blank entirely from backlight_properties. I’ll add it as a fourth patch for drm/panel if that makes things easier!
There will still be references to FB_BLANK constants since they’re used for backlight_properties.power values. Would it make sense to rename those?
Regards,
Stephen
Re: [PATCH 2/3] drm/panel: panel-dsi-cm: Use backlight helpers
Quoted 40 lines · Stephen Kitt
Quoted 39 lines · Sam Ravnborg
Hi Stephen.
Quoted 29 lines · Stephen Kitt
Hi Sebastian,
Quoted 25 lines · Sebastian Reichel
Quoted 18 lines · Stephen Kitt
(quoted diff) +0
-0
b/drivers/gpu/drm/panel/panel-dsi-cm.cindexb58cb064975f..aa36dc6cedd3100644 ---a/drivers/gpu/drm/panel/panel-dsi-cm.c+++b/drivers/gpu/drm/panel/panel-dsi-cm.c@@ -86,16 +86,10 @@ static voiddsicm_bl_power(struct panel_drv_data *ddata, bool enable)return;drivers/gpu/drm/panel/panel-dsi-cm.c +0
-2if (enable) { - backlight->props.fb_blank =FB_BLANK_UNBLANK ; - backlight->props.state = ~(BL_CORE_FBBLANK |
BL_CORE_SUSPENDED);drivers/gpu/drm/panel/panel-dsi-cm.c +1
-4- backlight->props.power =FB_BLANK_UNBLANK ; +backlight_enable (backlight); }else { - backlight->props.fb_blank =FB_BLANK_NORMAL ; - backlight->props.power =FB_BLANK_POWERDOWN ; - backlight->props.state |= BL_CORE_FBBLANK |
BL_CORE_SUSPENDED;drivers/gpu/drm/panel/panel-dsi-cm.c static void dsicm_bl_power(struct panel_drv_data *ddata, bool enable) · line 92
Quoted 2 lines
drivers/gpu/drm/panel/panel-dsi-cm.c +1
-0+backlight_disable (backlight); }The brackets can be removed now. Otherwise:
Quoted 4 lines
Quoted 1 line
Reviewed-by Sebastian Reichel <[email protected]>Thanks, I’ll wait a little more to see if there are any other reviews of the patches and then push a v2 with that fix.
It would be very nice if you could kill all uses of
FB_BLANKin thedrivers/gpu/drm/panel/*drivers, and post them as one series. This is long overdue to introduce the backlight helpers.
Quoted 8 lines
Quoted 2 lines
The three you posted is already a nice step forward, and there may be more panel drivers I have missed.
With this series on top of 5.19-rc1, the only remaining .fb_blank reference is in
acx565akm_backlight_init()inpanel-sony-acx565akm.c; I was planning on nuking that along with the other .fb_blank initialisers in a series removing .fb_blank entirely frombacklight_properties. I’ll add it as a fourth patch for drm/panel if that makes things easier!
That’s in drivers/gpu/drm/panel of course, there are a few others elsewhere (I’ve got patches in flight for most of them, I’ve got the rest ready for submission).
Quoted 2 lines
There will still be references to
FB_BLANKconstants since they’re used for backlight_properties.power values. Would it make sense to rename those?
Just to make sure — I’m cleaning up backlight_properties.fb_blank, not fb_ops.fb_blank. I wasn’t planning on touching the latter...
Regards,
Stephen
Re: [PATCH 2/3] drm/panel: panel-dsi-cm: Use backlight helpers
Hi Stephen,
Quoted 20 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Thanks, I’ll wait a little more to see if there are any other reviews of the patches and then push a v2 with that fix.
It would be very nice if you could kill all uses of
FB_BLANKin thedrivers/gpu/drm/panel/*drivers, and post them as one series. This is long overdue to introduce the backlight helpers.Quoted 8 lines
Quoted 2 lines
The three you posted is already a nice step forward, and there may be more panel drivers I have missed.
With this series on top of 5.19-rc1, the only remaining .fb_blank reference is in
acx565akm_backlight_init()inpanel-sony-acx565akm.c; I was planning on nuking that along with the other .fb_blank initialisers in a series removing .fb_blank entirely frombacklight_properties. I’ll add it as a fourth patch for drm/panel if that makes things easier!That’s in
drivers/gpu/drm/panelof course, there are a few others elsewhere (I’ve got patches in flight for most of them, I’ve got the rest ready for submission).
Quoted 5 lines
Quoted 2 lines
There will still be references to
FB_BLANKconstants since they’re used for backlight_properties.power values. Would it make sense to rename those?Just to make sure — I’m cleaning up backlight_properties.fb_blank, not fb_ops.fb_blank. I wasn’t planning on touching the latter...
Nuking props.fb_blank - that a fine goal - so keep focus there. We can then later revisit the other clean-up possibilities.
Since you do this tree-wide do not do the mistake and try to cover too much at the same time, because then you never finish.
So forget my comment for now and keep up the good work on removing props.fb_blank.
Sam
PATCH 3/3 drm/panel: sony-acx565akm: Use backlight helpers
In reply to Stephen KittInstead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes.
Instead of manually checking the power state in struct backlight_properties, use backlight_is_blank().
--- drivers/gpu/drm/panel/panel-sony-acx565akm.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)
drivers/gpu/drm/panel/panel-sony-acx565akm.c +2 -9
@@ -298,13 +298,7 @@ static void acx565akm_set_brightness(struct acx565akm_panel *lcd, int level)static int acx565akm_bl_update_status_locked (struct backlight_device *dev) {struct acx565akm_panel *lcd =dev_get_drvdata (&dev->dev); -int level; - -if (dev->props.fb_blank ==FB_BLANK_UNBLANK && - dev->props.power ==FB_BLANK_UNBLANK ) - level = dev->props.brightness; -else - level =0 ; +int level =backlight_get_brightness (dev);acx565akm_set_brightness (lcd, level);
@@ -330,8 +324,7 @@ static int acx565akm_bl_get_intensity(struct backlight_device *dev)mutex_lock (&lcd->mutex); -if (dev->props.fb_blank ==FB_BLANK_UNBLANK && - dev->props.power ==FB_BLANK_UNBLANK ) +if (!backlight_is_blank (dev)) intensity =acx565akm_get_actual_brightness (lcd);else intensity =0 ;
Signature · 1 line
2.30.2
Re: [PATCH 3/3] drm/panel: sony-acx565akm: Use backlight helpers
Hi,
Quoted 8 lines · Stephen Kitt
Instead of retrieving the backlight brightness in struct
backlight_propertiesmanually, and then checking whether the backlight should be on at all, usebacklight_get_brightness()which does all this and insulates this from future changes.Instead of manually checking the power state in struct
backlight_properties, usebacklight_is_blank().
Quoted 7 lines
Signed-off-by Stephen Kitt <[email protected]>Cc Thierry Reding <[email protected]>Cc Sam Ravnborg <[email protected]>Cc David Airlie <[email protected]>Cc Daniel Vetter <[email protected]>---
-- Sebastian
Quoted 35 lines
drivers/gpu/drm/panel/panel-sony-acx565akm.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)drivers/gpu/drm/panel/panel-sony-acx565akm.c +2
-9@@ -298,13 +298,7 @@ static void acx565akm_set_brightness(struct acx565akm_panel *lcd, int level)static int acx565akm_bl_update_status_locked (struct backlight_device *dev) {struct acx565akm_panel *lcd =dev_get_drvdata (&dev->dev); -int level; - -if (dev->props.fb_blank ==FB_BLANK_UNBLANK && - dev->props.power ==FB_BLANK_UNBLANK ) - level = dev->props.brightness; -else - level =0 ; +int level =backlight_get_brightness (dev);acx565akm_set_brightness (lcd, level);@@ -330,8 +324,7 @@ static int acx565akm_bl_get_intensity(struct backlight_device *dev)mutex_lock (&lcd->mutex); -if (dev->props.fb_blank ==FB_BLANK_UNBLANK && - dev->props.power ==FB_BLANK_UNBLANK ) +if (!backlight_is_blank (dev)) intensity =acx565akm_get_actual_brightness (lcd);else intensity =0 ;Signature · 1 line
2.30.2