Skip to contentSkip to conversation

Additional EDiF bug fixes

PATCH Applied Nilesh Javali 3 participants 14 messages Jun 8, 2022 – Jun 14, 2022

Subsystems (2)
lore
Share & tools
lore

Nilesh Javali

author maintainer
#0 lore raw

cover Additional EDiF bug fixes

Martin,

Please apply the qla2xxx driver additional EDiF bug fixes to the scsi tree at your earliest convenience.

Thanks,
Nilesh

Nilesh Javali (1):
qla2xxx: Update version to 10.02.07.600-k

Quinn Tran (9):
qla2xxx: edif: Fix IO timeout due to over subscription
qla2xxx: edif: send logo for unexpected IKE message
qla2xxx: edif: reduce disruption due to multiple app start
qla2xxx: edif: fix no login after app start
qla2xxx: edif: tear down session if keys has been removed
qla2xxx: edif: fix session thrash
qla2xxx: edif: Fix no logout on delete for n2n
qla2xxx: edif: Reduce N2N thrashing at app_start time
qla2xxx: edif: Fix slow session tear down

 drivers/scsi/qla2xxx/qla_def.h     |  5 ++
 drivers/scsi/qla2xxx/qla_edif.c    | 80 +++++++++++++++++++++++-------
 drivers/scsi/qla2xxx/qla_edif.h    |  4 ++
 drivers/scsi/qla2xxx/qla_fw.h      |  2 +-
 drivers/scsi/qla2xxx/qla_init.c    | 10 +++-
 drivers/scsi/qla2xxx/qla_iocb.c    |  3 ++
 drivers/scsi/qla2xxx/qla_isr.c     | 35 +++++++------
 drivers/scsi/qla2xxx/qla_version.h |  4 +-
 8 files changed, 107 insertions(+), 36 deletions(-)

base-commit: 3fd3a52ca672fea71ff6ebaded2e2ddbbfb3a397

Signature · 1 line
2.19.0.rc0
author maintainer
#1 lore raw

PATCH 1/10 qla2xxx: edif: Fix IO timeout due to over subscription

From: Quinn Tran <[email protected]>

Current edif code does not keep track of FW IOCB resources. This led to IOCB queue full on error recovery (IO timeout). This patch make use of the existing code that track IOCB resources to prevent over subscription of IOCB resources.

---
 drivers/scsi/qla2xxx/qla_edif.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/scsi/qla2xxx/qla_edif.c +7 -0
index 18eb8d63e37c..6a16e16e39f5 100644
@@ -2951,6 +2951,12 @@ qla28xx_start_scsi_edif(srb_t *sp)
 
 	tot_dsds = nseg;
 	req_cnt = qla24xx_calc_iocbs(vha, tot_dsds);
+
+	sp->iores.res_type = RESOURCE_INI;
+	sp->iores.iocb_cnt = req_cnt;
+	if (qla_get_iocbs(sp->qpair, &sp->iores))
+		goto queuing_error;
+
 	if (req->cnt < (req_cnt + 2)) {
 		cnt = IS_SHADOW_REG_CAPABLE(ha) ? *req->out_ptr :
 		    rd_reg_dword(req->req_q_out);
@@ -3142,6 +3148,7 @@ qla28xx_start_scsi_edif(srb_t *sp)
 		mempool_free(sp->u.scmd.ct6_ctx, ha->ctx_mempool);
 		sp->u.scmd.ct6_ctx = NULL;
 	}
+	qla_put_iocbs(sp->qpair, &sp->iores);
 	spin_unlock_irqrestore(lock, flags);
 
 	return QLA_FUNCTION_FAILED;
Signature · 1 line
2.19.0.rc0
author maintainer
#2 lore raw

PATCH 2/10 qla2xxx: edif: send logo for unexpected IKE message

In reply to Nilesh Javali

From: Quinn Tran <[email protected]>

If session is down and local port continue to receive
AUTH ELS messages for the down session, driver need to
send back LOGO so that remote device knows to tear down
its session. This patch terminate/cleanup the AUTH ELS exchange followed with a pass through LOGO.

Fixes 225479296c4f ("scsi: qla2xxx: edif: Reject AUTH ELS on session down")
---
 drivers/scsi/qla2xxx/qla_edif.c | 19 +++++++++++++++++--
 drivers/scsi/qla2xxx/qla_fw.h   |  2 +-
 2 files changed, 18 insertions(+), 3 deletions(-)
drivers/scsi/qla2xxx/qla_edif.c +17 -2
index 6a16e16e39f5..d25eb212398e 100644
@@ -2565,8 +2565,7 @@ void qla24xx_auth_els(scsi_qla_host_t *vha, void **pkt, struct rsp_que **rsp)
 
 	fcport = qla2x00_find_fcport_by_pid(host, &purex->pur_info.pur_sid);
 
-	if (DBELL_INACTIVE(vha) ||
-	    (fcport && EDIF_SESSION_DOWN(fcport))) {
+	if (DBELL_INACTIVE(vha)) {
 		ql_dbg(ql_dbg_edif, host, 0x0910c, "%s e_dbell.db_flags =%x %06x\n",
 		    __func__, host->e_dbell.db_flags,
 		    fcport ? fcport->d_id.b24 : 0);
@@ -2576,6 +2575,22 @@ void qla24xx_auth_els(scsi_qla_host_t *vha, void **pkt, struct rsp_que **rsp)
 		return;
 	}
 
+	if (fcport && EDIF_SESSION_DOWN(fcport)) {
+		ql_dbg(ql_dbg_edif, host, 0x13b6,
+		    "%s terminate exchange. Send logo to 0x%x\n",
+		    __func__, a.did.b24);
+
+		a.tx_byte_count = a.tx_len = 0;
+		a.tx_addr = 0;
+		a.control_flags = EPD_RX_XCHG;  /* EPD_RX_XCHG = terminate cmd */
+		qla_els_reject_iocb(host, (*rsp)->qpair, &a);
+		qla_enode_free(host, ptr);
+		/* send logo to let remote port knows to tear down session */
+		fcport->send_els_logo = 1;
+		qlt_schedule_sess_for_deletion(fcport);
+		return;
+	}
+
 	/* add the local enode to the list */
 	qla_enode_add(host, ptr);
 
drivers/scsi/qla2xxx/qla_fw.h +1 -1
index 0bb1d562f0bf..361015b5763e 100644
@@ -807,7 +807,7 @@ struct els_entry_24xx {
 #define EPD_ELS_COMMAND		(0 << 13)
 #define EPD_ELS_ACC		(1 << 13)
 #define EPD_ELS_RJT		(2 << 13)
-#define EPD_RX_XCHG		(3 << 13)
+#define EPD_RX_XCHG		(3 << 13)  /* terminate exchange */
 #define ECF_CLR_PASSTHRU_PEND	BIT_12
 #define ECF_INCL_FRAME_HDR	BIT_11
 #define ECF_SEC_LOGIN		BIT_3
Signature · 1 line
2.19.0.rc0
author maintainer
#3 lore raw

PATCH 3/10 qla2xxx: edif: reduce disruption due to multiple app start

In reply to Nilesh Javali

From: Quinn Tran <[email protected]>

Multiple app start can trigger session bounce. Driver will skip over session tear down if app start is seen more than once.

Fixes 7ebb336e45ef ("scsi: qla2xxx: edif: Add start + stop bsgs")
---
 drivers/scsi/qla2xxx/qla_edif.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_edif.c +2 -2
index d25eb212398e..a4e444ea0363 100644
@@ -510,8 +510,7 @@ qla_edif_app_start(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
 		/* mark doorbell as active since an app is now present */
 		vha->e_dbell.db_flags |= EDB_ACTIVE;
 	} else {
-		ql_dbg(ql_dbg_edif, vha, 0x911e, "%s doorbell already active\n",
-		     __func__);
+		goto out;
 	}
 
 	if (N2N_TOPO(vha->hw)) {
@@ -578,6 +577,7 @@ qla_edif_app_start(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
 		     __func__);
 	}
 
+out:
 	appreply.host_support_edif = vha->hw->flags.edif_enabled;
 	appreply.edif_enode_active = vha->pur_cinfo.enode_flags;
 	appreply.edif_edb_active = vha->e_dbell.db_flags;
Signature · 1 line
2.19.0.rc0
author maintainer
#4 lore raw

PATCH 4/10 qla2xxx: edif: fix no login after app start

In reply to Nilesh Javali

From: Quinn Tran <[email protected]>

The scenario is user loaded driver but has not start authentication app. All sessions to secure device will exhaust all login attempt, fail and in stay in delete state.
Some time later, app started. Driver will:
replenish the login retry count,
trigger delete to prepare for secure login,
after deletion, relogin is triggered.

For the session that is already deleted, the delete trigger is a no-op. If none of the session trigger the relogin needed, then there's no movement.

This patch add a re-login trigger to relogin.

Fixes 7ebb336e45ef ("scsi: qla2xxx: edif: Add start + stop bsgs")
---
 drivers/scsi/qla2xxx/qla_edif.c | 1 +
 1 file changed, 1 insertion(+)
drivers/scsi/qla2xxx/qla_edif.c +1 -0
index a4e444ea0363..dd3593333d7b 100644
@@ -567,6 +567,7 @@ qla_edif_app_start(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
 			qlt_schedule_sess_for_deletion(fcport);
 			qla_edif_sa_ctl_init(vha, fcport);
 		}
+		set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 	}
 
 	if (vha->pur_cinfo.enode_flags != ENODE_ACTIVE) {
Signature · 1 line
2.19.0.rc0
author maintainer
#5 lore raw

PATCH 5/10 qla2xxx: edif: tear down session if keys has been removed

In reply to Nilesh Javali

From: Quinn Tran <[email protected]>

If all keys for a session has been deleted then trigger a session tear down.

Fixes dd30706e73b7 ("scsi: qla2xxx: edif: Add key update")
---
 drivers/scsi/qla2xxx/qla_def.h | 5 +++++
 drivers/scsi/qla2xxx/qla_isr.c | 1 +
 2 files changed, 6 insertions(+)
drivers/scsi/qla2xxx/qla_def.h +5 -0
index 3e78bafa4011..f064dcdbb975 100644
@@ -2158,6 +2158,11 @@ typedef struct {
 #define CS_IOCB_ERROR		0x31	/* Generic error for IOCB request
 					   failure */
 #define CS_REJECT_RECEIVED	0x4E	/* Reject received */
+#define CS_EDIF_AUTH_ERROR	0x63	/* decrypt error */
+#define CS_EDIF_PAD_LEN_ERROR	0x65	/* pad > frame size, not 4byte align */
+#define CS_EDIF_INV_REQ		0x66	/* invalid request */
+#define CS_EDIF_SPI_ERROR	0x67	/* rx frame unable to locate sa */
+#define CS_EDIF_HDR_ERROR	0x69	/* data frame != expected len */
 #define CS_BAD_PAYLOAD		0x80	/* Driver defined */
 #define CS_UNKNOWN		0x81	/* Driver defined */
 #define CS_RETRY		0x82	/* Driver defined */
drivers/scsi/qla2xxx/qla_isr.c +1 -0
index 21b31d6359c8..8e6831953e7c 100644
@@ -3426,6 +3426,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 	case CS_PORT_UNAVAILABLE:
 	case CS_TIMEOUT:
 	case CS_RESET:
+	case CS_EDIF_INV_REQ:
 
 		/*
 		 * We are going to have the fc class block the rport
Signature · 1 line
2.19.0.rc0
author maintainer
#6 lore raw

PATCH 6/10 qla2xxx: edif: fix session thrash

In reply to Nilesh Javali

From: Quinn Tran <[email protected]>

Current code prematurely sends out prli before authentication application has given the ok to do it. This cause prli failure and session tear down. This patch prevents prli from going out before authentication app gives the ok.

Fixes 91f6f5fbe87b ("scsi: qla2xxx: edif: Reduce connection thrash")
---
 drivers/scsi/qla2xxx/qla_edif.c |  2 +-
 drivers/scsi/qla2xxx/qla_edif.h |  4 ++++
 drivers/scsi/qla2xxx/qla_init.c | 10 +++++++++-
 3 files changed, 14 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_edif.c +1 -1
index dd3593333d7b..5ada36acf129 100644
@@ -3517,7 +3517,7 @@ int qla_edif_process_els(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
 	if (qla_bsg_check(vha, bsg_job, fcport))
 		return 0;
 
-	if (fcport->loop_id == FC_NO_LOOP_ID) {
+	if (EDIF_SESS_DELETE(fcport)) {
 		ql_dbg(ql_dbg_edif, vha, 0x910d,
 		    "%s ELS code %x, no loop id.\n", __func__,
 		    bsg_request->rqst_data.r_els.els_code);
drivers/scsi/qla2xxx/qla_edif.h +4 -0
index 3561e22b8f0f..7cdb89ccdc6e 100644
@@ -141,4 +141,8 @@ struct enode {
 	(DBELL_ACTIVE(_fcport->vha) && \
 	 (_fcport->disc_state == DSC_LOGIN_AUTH_PEND))
 
+#define EDIF_SESS_DELETE(_s) \
+	(qla_ini_mode_enabled(_s->vha) && (_s->disc_state == DSC_DELETE_PEND || \
+	 _s->disc_state == DSC_DELETED))
+
 #endif	/* __QLA_EDIF_H */
drivers/scsi/qla2xxx/qla_init.c +9 -1
index d915c1f85fa2..6070834104f6 100644
@@ -1762,8 +1762,16 @@ int qla24xx_fcport_handle_login(struct scsi_qla_host *vha, fc_port_t *fcport)
 		break;
 
 	case DSC_LOGIN_PEND:
-		if (fcport->fw_login_state == DSC_LS_PLOGI_COMP)
+		if (vha->hw->flags.edif_enabled)
+			break;
+
+		if (fcport->fw_login_state == DSC_LS_PLOGI_COMP) {
+			ql_dbg(ql_dbg_disc, vha, 0x2118,
+			       "%s %d %8phC post %s PRLI\n",
+			       __func__, __LINE__, fcport->port_name,
+			       NVME_TARGET(vha->hw, fcport) ? "NVME" : "FC");
 			qla24xx_post_prli_work(vha, fcport);
+		}
 		break;
 
 	case DSC_UPD_FCPORT:
Signature · 1 line
2.19.0.rc0
author maintainer
#7 lore raw

PATCH 7/10 qla2xxx: edif: Fix no logout on delete for n2n

In reply to Nilesh Javali

From: Quinn Tran <[email protected]>

Driver failed to send implicit logout on session delete. For edif, this failed to flush any lingering SA index in FW. This patch set a flag to turn on implicit logout early in the session recovery to make sure it would go out in case of error.

Fixes 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF")
---
 drivers/scsi/qla2xxx/qla_iocb.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/scsi/qla2xxx/qla_iocb.c +3 -0
index 46c879923da1..42ce4e1fe744 100644
@@ -2882,6 +2882,9 @@ static void qla2x00_els_dcmd2_sp_done(srb_t *sp, int res)
 	    sp->name, res, sp->handle, fcport->d_id.b24, fcport->port_name);
 
 	fcport->flags &= ~(FCF_ASYNC_SENT|FCF_ASYNC_ACTIVE);
+	/* For edif, set logout on delete to ensure any residual key from FW is flushed.*/
+	fcport->logout_on_delete = 1;
+	fcport->chip_reset = vha->hw->base_qpair->chip_reset;
 
 	if (sp->flags & SRB_WAKEUP_ON_COMP)
 		complete(&lio->u.els_plogi.comp);
Signature · 1 line
2.19.0.rc0
author maintainer
#8 lore raw

PATCH 8/10 qla2xxx: edif: Reduce N2N thrashing at app_start time

In reply to Nilesh Javali

From: Quinn Tran <[email protected]>

For n2n + remote wwpn is bigger than local adapter, remote adapter will login to local adapter while authentication application is not running. When authentication application do starts, the current session in FW needs to to be invalidate. This patch make sure the old session is torn down before triggering a relogin.

Fixes 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF")
---
 drivers/scsi/qla2xxx/qla_edif.c | 47 ++++++++++++++++++++++++---------
 1 file changed, 34 insertions(+), 13 deletions(-)
drivers/scsi/qla2xxx/qla_edif.c +34 -13
index 5ada36acf129..9d093b053c32 100644
@@ -517,11 +517,28 @@ qla_edif_app_start(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
 		list_for_each_entry_safe(fcport, tf, &vha->vp_fcports, list)
 			fcport->n2n_link_reset_cnt = 0;
 
-		if (vha->hw->flags.n2n_fw_acc_sec)
-			set_bit(N2N_LINK_RESET, &vha->dpc_flags);
-		else
+		if (vha->hw->flags.n2n_fw_acc_sec) {
+			list_for_each_entry_safe(fcport, tf, &vha->vp_fcports, list)
+				qla_edif_sa_ctl_init(vha, fcport);
+
+			/*
+			 * While authentication app was not running, remote device
+			 * could still try to login with this local port.  Let's
+			 * clear the state and try again.
+			 */
+			qla2x00_wait_for_sess_deletion(vha);
+
+			/* bounce the link to get the other guy to relogin */
+			if (!vha->hw->flags.n2n_bigger) {
+				set_bit(N2N_LINK_RESET, &vha->dpc_flags);
+				qla2xxx_wake_dpc(vha);
+			}
+		} else {
+			qla2x00_wait_for_hba_online(vha);
 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
-		qla2xxx_wake_dpc(vha);
+			qla2xxx_wake_dpc(vha);
+			qla2x00_wait_for_hba_online(vha);
+		}
 	} else {
 		list_for_each_entry_safe(fcport, tf, &vha->vp_fcports, list) {
 			ql_dbg(ql_dbg_edif, vha, 0x2058,
@@ -920,17 +937,21 @@ qla_edif_app_getfcinfo(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
 			if (tdid.b24 != 0 && tdid.b24 != fcport->d_id.b24)
 				continue;
 
-			if (fcport->scan_state != QLA_FCPORT_FOUND)
-				continue;
+			if (!N2N_TOPO(vha->hw)) {
+				if (fcport->scan_state != QLA_FCPORT_FOUND)
+					continue;
 
-			if (fcport->port_type == FCT_UNKNOWN && !fcport->fc4_features)
-				rval = qla24xx_async_gffid(vha, fcport, true);
+				if (fcport->port_type == FCT_UNKNOWN &&
+				    !fcport->fc4_features)
+					rval = qla24xx_async_gffid(vha, fcport,
+								   true);
 
-			if (!rval &&
-			    !(fcport->fc4_features & FC4_FF_TARGET ||
-			      fcport->port_type &
-			      (FCT_TARGET | FCT_NVME_TARGET)))
-				continue;
+				if (!rval &&
+				    !(fcport->fc4_features & FC4_FF_TARGET ||
+				      fcport->port_type &
+				      (FCT_TARGET | FCT_NVME_TARGET)))
+					continue;
+			}
 
 			rval = 0;
 
Signature · 1 line
2.19.0.rc0
author maintainer
#9 lore raw

PATCH 9/10 qla2xxx: edif: Fix slow session tear down

In reply to Nilesh Javali

From: Quinn Tran <[email protected]>

User experience slow recovery when target device went through a stop/start of the authentication application (app_stop/app_start).

Between the period of app_stop and app_start on the target device, target device choose to send ELS Reject for any receive AUTH ELS command. At this time, authentication application does not do els reject if it encounters error.

Therefore, AUTH ELS reject signify authentication application is not running. If driver pass up the AUTH ELS Reject to the authentication application, then it would result in authentication application retrying/resending the same AUTH ELS command again + delay.

As a work around, driver would trigger a session tear down where it tell the local authentication application to also tear down. At the next relogin, both side would be synchronize.

---
 drivers/scsi/qla2xxx/qla_isr.c | 34 ++++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 14 deletions(-)
drivers/scsi/qla2xxx/qla_isr.c +20 -14
index 8e6831953e7c..d87c53bc014b 100644
@@ -2245,9 +2245,9 @@ qla24xx_els_ct_entry(scsi_qla_host_t *v, struct req_que *req,
 				res = DID_ERROR << 16;
 			}
 
-			if (logit) {
-				if (sp->remap.remapped &&
-				    ((u8 *)sp->remap.rsp.buf)[0] == ELS_LS_RJT) {
+			if (sp->remap.remapped &&
+			    ((u8 *)sp->remap.rsp.buf)[0] == ELS_LS_RJT) {
+				if (logit) {
 					ql_dbg(ql_dbg_user, vha, 0x503f,
 					    "%s IOCB Done LS_RJT hdl=%x comp_status=0x%x\n",
 					    type, sp->handle, comp_status);
@@ -2259,18 +2259,24 @@ qla24xx_els_ct_entry(scsi_qla_host_t *v, struct req_que *req,
 						pkt)->total_byte_count),
 					    e->s_id[0], e->s_id[2], e->s_id[1],
 					    e->d_id[2], e->d_id[1], e->d_id[0]);
-				} else {
-					ql_log(ql_log_info, vha, 0x503f,
-					    "%s IOCB Done hdl=%x comp_status=0x%x\n",
-					    type, sp->handle, comp_status);
-					ql_log(ql_log_info, vha, 0x503f,
-					    "subcode 1=0x%x subcode 2=0x%x bytes=0x%x %02x%02x%02x -> %02x%02x%02x\n",
-					    fw_status[1], fw_status[2],
-					    le32_to_cpu(((struct els_sts_entry_24xx *)
-						pkt)->total_byte_count),
-					    e->s_id[0], e->s_id[2], e->s_id[1],
-					    e->d_id[2], e->d_id[1], e->d_id[0]);
 				}
+				if (sp->fcport && sp->fcport->flags & FCF_FCSP_DEVICE &&
+				    sp->type == SRB_ELS_CMD_HST_NOLOGIN) {
+					ql_dbg(ql_dbg_edif, vha, 0x911e,
+					    "%s rcv reject. Sched delete\n", __func__);
+					qlt_schedule_sess_for_deletion(sp->fcport);
+				}
+			} else if (logit) {
+				ql_log(ql_log_info, vha, 0x503f,
+				    "%s IOCB Done hdl=%x comp_status=0x%x\n",
+				    type, sp->handle, comp_status);
+				ql_log(ql_log_info, vha, 0x503f,
+				    "subcode 1=0x%x subcode 2=0x%x bytes=0x%x %02x%02x%02x -> %02x%02x%02x\n",
+				    fw_status[1], fw_status[2],
+				    le32_to_cpu(((struct els_sts_entry_24xx *)
+				    pkt)->total_byte_count),
+				    e->s_id[0], e->s_id[2], e->s_id[1],
+				    e->d_id[2], e->d_id[1], e->d_id[0]);
 			}
 		}
 		goto els_ct_done;
Signature · 1 line
2.19.0.rc0
author maintainer
#10 lore raw

PATCH 10/10 qla2xxx: Update version to 10.02.07.600-k

In reply to Nilesh Javali
---
 drivers/scsi/qla2xxx/qla_version.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_version.h +2 -2
index e5ce7599cae2..0f0fbb391561 100644
@@ -6,9 +6,9 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "10.02.07.500-k"
+#define QLA2XXX_VERSION      "10.02.07.600-k"
 
 #define QLA_DRIVER_MAJOR_VER	10
 #define QLA_DRIVER_MINOR_VER	2
 #define QLA_DRIVER_PATCH_VER	7
-#define QLA_DRIVER_BETA_VER	500
+#define QLA_DRIVER_BETA_VER	600
Signature · 1 line
2.19.0.rc0
Reviewed-by on the v1 series
#11 lore raw
In reply to Nilesh Javali
Quoted 37 lines · Nilesh Javali

Martin,

Please apply the qla2xxx driver additional EDiF bug fixes to the scsi tree at your earliest convenience.

Thanks,
Nilesh

Nilesh Javali (1):
qla2xxx: Update version to 10.02.07.600-k

Quinn Tran (9):
qla2xxx: edif: Fix IO timeout due to over subscription
qla2xxx: edif: send logo for unexpected IKE message
qla2xxx: edif: reduce disruption due to multiple app start
qla2xxx: edif: fix no login after app start
qla2xxx: edif: tear down session if keys has been removed
qla2xxx: edif: fix session thrash
qla2xxx: edif: Fix no logout on delete for n2n
qla2xxx: edif: Reduce N2N thrashing at app_start time
qla2xxx: edif: Fix slow session tear down

drivers/scsi/qla2xxx/qla_def.h     |  5 ++
drivers/scsi/qla2xxx/qla_edif.c    | 80 +++++++++++++++++++++++-------
drivers/scsi/qla2xxx/qla_edif.h    |  4 ++
drivers/scsi/qla2xxx/qla_fw.h      |  2 +-
drivers/scsi/qla2xxx/qla_init.c    | 10 +++-
drivers/scsi/qla2xxx/qla_iocb.c    |  3 ++
drivers/scsi/qla2xxx/qla_isr.c     | 35 +++++++------
drivers/scsi/qla2xxx/qla_version.h |  4 +-
8 files changed, 107 insertions(+), 36 deletions(-)
Quoted 4 lines

base-commit: 3fd3a52ca672fea71ff6ebaded2e2ddbbfb3a397

Signature · 1 line
2.19.0.rc0

The Series looks Good.

--
Himanshu Madhani Oracle Linux Engineering

#12 lore raw
In reply to Nilesh Javali

Nilesh,

Quoted 2 lines

Please apply the qla2xxx driver additional EDiF bug fixes to the scsi tree at your earliest convenience.

Applied to 5.20/scsi-staging, thanks!

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering
#13 lore raw
In reply to Nilesh Javali
Quoted 9 lines · Nilesh Javali

Martin,

Please apply the qla2xxx driver additional EDiF bug fixes to the scsi tree at your earliest convenience.

Thanks,
Nilesh

[...]

Applied to 5.20/scsi-queue, thanks!

[01/10] qla2xxx: edif: Fix IO timeout due to over subscription

        https://git.kernel.org/mkp/scsi/c/63ab6cb582fa
[02/10] qla2xxx: edif: send logo for unexpected IKE message
        https://git.kernel.org/mkp/scsi/c/2b659ed67a12
[03/10] qla2xxx: edif: reduce disruption due to multiple app start
        https://git.kernel.org/mkp/scsi/c/0dbfce5255fe
[04/10] qla2xxx: edif: fix no login after app start
        https://git.kernel.org/mkp/scsi/c/24c796098f53
[05/10] qla2xxx: edif: tear down session if keys has been removed
        https://git.kernel.org/mkp/scsi/c/d7e2e4a68fc0
[06/10] qla2xxx: edif: fix session thrash
        https://git.kernel.org/mkp/scsi/c/a8fdfb0b39c2
[07/10] qla2xxx: edif: Fix no logout on delete for n2n
        https://git.kernel.org/mkp/scsi/c/ec538eb838f3
[08/10] qla2xxx: edif: Reduce N2N thrashing at app_start time
        https://git.kernel.org/mkp/scsi/c/37be3f9d6993
[09/10] qla2xxx: edif: Fix slow session tear down
        https://git.kernel.org/mkp/scsi/c/bcf536072f74
[10/10] qla2xxx: Update version to 10.02.07.600-k
        https://git.kernel.org/mkp/scsi/c/0f4d7d556125
Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering