bpf: cgroup_sock lsm flavor
Subsystems (12)
v9 cover bpf: cgroup_sock lsm flavor
This series implements new lsm flavor for attaching per-cgroup programs to existing lsm hooks. The cgroup is taken out of 'current', unless the first argument of the hook is 'struct socket'. In this case, the cgroup association is taken out of socket. The attachment looks like a regular per-cgroup attachment: we add new BPF_LSM_CGROUP attach type which, together with attach_btf_id, signals per-cgroup lsm. Behind the scenes, we allocate trampoline shim program and attach to lsm. This program looks up cgroup from current/socket and runs cgroup's effective prog array. The rest of the per-cgroup BPF stays the same: hierarchy, local storage, retval conventions (return 1 == success).
Current limitations:
* haven't considered sleepable bpf; can be extended later on
* not sure the verifier does the right thing with null checks; see latest selftest for details
* total of 10 (global) per-cgroup LSM attach points
v9:
Major change since last version is the switch to bpf_setsockopt to change the socket state instead of letting the progs poke socket directly. This, in turn, highlights the challenge that we need to care about whether the socket is locked or not when we call bpf_setsockopt. (with my original example selftest, the hooks are running early in the init phase for this not to matter).
For now, I've added two btf id lists:
* hooks where we know the socket is locked and it's safe to call bpf_setsockopt
* hooks where we know the socket is _not_ locked, but the hook works on the socket that's not yet exposed to userspace so it should be safe (for this mode, special new set of bpf_{s,g}etsockopt helpers
is added; they don't have sock_owned_by_me check)
Going forward, for the rest of the hooks, this might be a good motivation to expand lsm cgroup to support sleeping bpf and allow the callers to lock/unlock sockets or have a new bpf_setsockopt variant that does the locking.
- ifdef around cleanup in cgroup_bpf_release
- Andrii: a few nits in libbpf patches
- Martin: remove unused btf_id_set_index
- Martin: bring back refcnt for cgroup_atype
- Martin: make __cgroup_bpf_query a bit more readable
- Martin: expose dst_prog->aux->attach_btf as attach_btf_obj_id as well
- Martin: reorg check_return_code path for BPF_LSM_CGROUP
- Martin: return directly from check_helper_call (instead of goto err)
- Martin: add note to new warning in check_return_code, print only for void hooks
- Martin: remove confusing shim reuse
- Martin: use bpf_{s,g}etsockopt instead of poking into socket data
- Martin: use CONFIG_CGROUP_BPF in bpf_prog_alloc_no_stats/bpf_prog_free_deferred
v8:
- CI: fix compile issue
- CI: fix broken bpf_cookie
- Yonghong: remove __bpf_trampoline_unlink_prog comment
- Yonghong: move cgroup_atype around to fill the gap
- Yonghong: make bpf_lsm_find_cgroup_shim void
- Yonghong: rename regs to args
- Yonghong: remove if(current) check
- Martin: move refcnt into bpf_link
- Martin: move shim management to bpf_link ops
- Martin: use cgroup_atype for shim only
- Martin: go back to arrays for managing cgroup_atype(s)
- Martin: export bpf_obj_id(aux->attach_btf)
- Andrii: reorder SEC_DEF("lsm_cgroup+")
- Andrii: OPTS_SET instead of OPTS_HAS
- Andrii: rename attach_btf_func_id
- Andrii: move into 1.0 map
v7:
- there were a lot of comments last time, hope I didn't forget anything, some of the bigger ones:
- Martin: use/extend BTF_SOCK_TYPE_SOCKET
- Martin: expose bpf_set_retval
- Martin: reject 'return 0' at the verifier for 'void' hooks
- Martin: prog_query returns all BPF_LSM_CGROUP, prog_info returns attach_btf_func_id
- Andrii: split libbpf changes
- Andrii: add field access test to test_progs, not test_verifier (still using asm though)
- things that I haven't addressed, stating them here explicitly, let me know if some of these are still problematic:
1. Andrii: exposing only link-based api: seems like the changes to support non-link-based ones are minimal, couple of lines, so seems like it worth having it?
2. Alexei: applying cgroup_atype for all cgroup hooks, not only cgroup lsm: looks a bit harder to apply everywhere that I originally thought; with lsm cgroup, we have a shim_prog pointer where we store cgroup_atype; for non-lsm programs, we don't have a trace program where to store it, so we still need some kind of global table to map from "static" hook to "dynamic" slot. So I'm dropping this "can be easily extended" clause from the description for now. I have converted this whole machinery to an RCU-managed list to remove synchronize_rcu().
- also note that I had to introduce new bpf_shim_tramp_link and moved refcnt there; we need something to manage new bpf_tramp_link
v6:
- remove active count & stats for shim program (Martin KaFai Lau)
- remove NULL/error check for btf_vmlinux (Martin)
- don't check cgroup_atype in bpf_cgroup_lsm_shim_release (Martin)
- use old_prog (instead of passed one) in __cgroup_bpf_detach (Martin)
- make sure attach_btf_id is the same in __cgroup_bpf_replace (Martin)
- enable cgroup local storage and test it (Martin)
- properly implement prog query and add bpftool & tests (Martin)
- prohibit non-shared cgroup storage mode for BPF_LSM_CGROUP (Martin)
v5:
- __cgroup_bpf_run_lsm_socket remove NULL sock/sk checks (Martin KaFai Lau)
- __cgroup_bpf_run_lsm_{socket,current} s/prog/shim_prog/ (Martin)
- make sure bpf_lsm_find_cgroup_shim works for hooks without args (Martin)
- __cgroup_bpf_attach make sure attach_btf_id is the same when replacing (Martin)
- call bpf_cgroup_lsm_shim_release only for LSM_CGROUP (Martin)
- drop BPF_LSM_CGROUP from bpf_attach_type_to_tramp (Martin)
- drop jited check from cgroup_shim_find (Martin)
- new patch to convert cgroup_bpf to hlist_node (Jakub Sitnicki)
- new shim flavor for 'struct sock' + list of exceptions (Martin)
v4:
- fix build when jit is on but syscall is off
v3:
- add BPF_LSM_CGROUP to bpftool
- use simple int instead of refcnt_t (to avoid use-after-free false positive)
v2:
- addressed build bot failures
Stanislav Fomichev (10):
bpf: add bpf_func_t and trampoline helpers
bpf: convert cgroup_bpf.progs to hlist
bpf: per-cgroup lsm flavor
bpf: minimize number of allocated lsm slots per program
bpf: implement BPF_PROG_QUERY for BPF_LSM_CGROUP
bpf: expose bpf_{g,s}etsockopt to lsm cgroup
libbpf: add lsm_cgoup_sock type
libbpf: implement bpf_prog_query_opts
bpftool: implement cgroup tree for BPF_LSM_CGROUP selftests/bpf: lsm_cgroup functional test
arch/x86/net/bpf_jit_comp.c | 24 +- include/linux/bpf-cgroup-defs.h | 13 +- include/linux/bpf-cgroup.h | 9 +- include/linux/bpf.h | 39 +- include/linux/bpf_lsm.h | 7 + include/linux/btf_ids.h | 3 +- include/uapi/linux/bpf.h | 4 + kernel/bpf/bpf_lsm.c | 83 ++++ kernel/bpf/btf.c | 1 + kernel/bpf/cgroup.c | 360 ++++++++++++++---- kernel/bpf/core.c | 9 + kernel/bpf/syscall.c | 18 +- kernel/bpf/trampoline.c | 262 +++++++++++-- kernel/bpf/verifier.c | 32 ++ net/core/filter.c | 60 ++- tools/bpf/bpftool/cgroup.c | 80 ++-- tools/include/linux/btf_ids.h | 4 +- tools/include/uapi/linux/bpf.h | 4 + tools/lib/bpf/bpf.c | 38 +- tools/lib/bpf/bpf.h | 15 + tools/lib/bpf/libbpf.c | 3 + tools/lib/bpf/libbpf.map | 1 + .../selftests/bpf/prog_tests/lsm_cgroup.c | 277 ++++++++++++++ .../selftests/bpf/progs/bpf_tracing_net.h | 1 + .../testing/selftests/bpf/progs/lsm_cgroup.c | 180 +++++++++ 25 files changed, 1369 insertions(+), 158 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/lsm_cgroup.c create mode 100644 tools/testing/selftests/bpf/progs/lsm_cgroup.c
Signature · 1 line
2.36.1.476.g0c4daa206d-goog
PATCH v9 1/10 bpf: add bpf_func_t and trampoline helpers
I'll be adding lsm cgroup specific helpers that grab trampoline mutex.
No functional changes.
--- include/linux/bpf.h | 11 ++++--- kernel/bpf/trampoline.c | 63 +++++++++++++++++++++-------------------- 2 files changed, 38 insertions(+), 36 deletions(-)
include/linux/bpf.h +5 -6
@@ -53,6 +53,8 @@ typedef u64 (*bpf_callback_t)(u64, u64, u64, u64, u64);typedef int (*bpf_iter_init_seq_priv_t )(void *private_data,struct bpf_iter_aux_info *aux);typedef void (*bpf_iter_fini_seq_priv_t )(void *private_data); +typedef unsigned int (*bpf_func_t )(const void *, +const struct bpf_insn *);struct bpf_iter_seq_info {const struct seq_operations *seq_ops;bpf_iter_init_seq_priv_t init_seq_private;
@@ -863,8 +865,7 @@ struct bpf_dispatcher { static __always_inline __nocfi unsigned int bpf_dispatcher_nop_func(const void *ctx,const struct bpf_insn *insnsi, -unsigned int (*bpf_func)(const void *, -const struct bpf_insn *)) +bpf_func_t bpf_func) {return bpf_func (ctx, insnsi); }
@@ -893,8 +894,7 @@ int arch_prepare_bpf_dispatcher(void *image, s64 *funcs, int num_funcs); noinline __nocfi unsigned int bpf_dispatcher_##name##_func( \const void *ctx, \const struct bpf_insn *insnsi, \ -unsigned int (*bpf_func)(const void *, \ -const struct bpf_insn *)) \ +bpf_func_t bpf_func) \ { \return bpf_func (ctx, insnsi); \ } \
@@ -905,8 +905,7 @@ int arch_prepare_bpf_dispatcher(void *image, s64 *funcs, int num_funcs); unsigned int bpf_dispatcher_##name##_func( \ const void *ctx, \ const struct bpf_insn *insnsi, \ - unsigned int (*bpf_func)(const void *, \ - const struct bpf_insn *)); \ + bpf_func_t bpf_func); \ extern struct bpf_dispatcher bpf_dispatcher_##name;#define BPF_DISPATCHER_FUNC (name) bpf_dispatcher_##name##_func#define BPF_DISPATCHER_PTR (name) (&bpf_dispatcher_##name)
kernel/bpf/trampoline.c +33 -30
114 lines not on this page · raw message
Signature · 1 line
2.36.1.476.g0c4daa206d-goog
Re: [PATCH bpf-next v9 01/10] bpf: add bpf_func_t and trampoline helpers
Quoted 6 lines · Stanislav Fomichev
I'll be adding lsm cgroup specific helpers that grab trampoline mutex.
No functional changes.
Signed-off-by Stanislav Fomichev <[email protected]>
PATCH v9 2/10 bpf: convert cgroup_bpf.progs to hlist
In reply to Stanislav FomichevThis lets us reclaim some space to be used by new cgroup lsm slots.
Before:
struct cgroup_bpf {
struct bpf_prog_array * effective[23]; /* 0 184 */
/* --- cacheline 2 boundary (128 bytes) was 56 bytes ago --- */
struct list_head progs[23]; /* 184 368 */
/* --- cacheline 8 boundary (512 bytes) was 40 bytes ago --- */
u32 flags[23]; /* 552 92 */
/* XXX 4 bytes hole, try to pack */
/* --- cacheline 10 boundary (640 bytes) was 8 bytes ago --- */
struct list_head storages; /* 648 16 */
struct bpf_prog_array * inactive; /* 664 8 */
struct percpu_ref refcnt; /* 672 16 */
struct work_struct release_work; /* 688 32 */
/* size: 720, cachelines: 12, members: 7 */
/* sum members: 716, holes: 1, sum holes: 4 */
/* last cacheline: 16 bytes */
};After:
struct cgroup_bpf {
struct bpf_prog_array * effective[23]; /* 0 184 */
/* --- cacheline 2 boundary (128 bytes) was 56 bytes ago --- */
struct hlist_head progs[23]; /* 184 184 */
/* --- cacheline 5 boundary (320 bytes) was 48 bytes ago --- */
u8 flags[23]; /* 368 23 */
/* XXX 1 byte hole, try to pack */
/* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */
struct list_head storages; /* 392 16 */
struct bpf_prog_array * inactive; /* 408 8 */
struct percpu_ref refcnt; /* 416 16 */
struct work_struct release_work; /* 432 72 */
/* size: 504, cachelines: 8, members: 7 */
/* sum members: 503, holes: 1, sum holes: 1 */
/* last cacheline: 56 bytes */
};--- include/linux/bpf-cgroup-defs.h | 4 +- include/linux/bpf-cgroup.h | 2 +- kernel/bpf/cgroup.c | 76 +++++++++++++++++++-------------- 3 files changed, 47 insertions(+), 35 deletions(-)
include/linux/bpf-cgroup-defs.h +2 -2
@@ -47,8 +47,8 @@ struct cgroup_bpf {* have either zero or one element * when BPF_F_ALLOW_MULTI the list can have up to BPF_CGROUP_MAX_PROGS */ -struct list_head progs[MAX_CGROUP_BPF_ATTACH_TYPE ]; -u32 flags[MAX_CGROUP_BPF_ATTACH_TYPE ]; +struct hlist_head progs[MAX_CGROUP_BPF_ATTACH_TYPE ]; +u8 flags[MAX_CGROUP_BPF_ATTACH_TYPE ];/* list of cgroup shared storages */ struct list_head storages;
include/linux/bpf-cgroup.h +1 -1
@@ -95,7 +95,7 @@ struct bpf_cgroup_link { };struct bpf_prog_list { -struct list_head node; +struct hlist_node node;struct bpf_prog *prog;struct bpf_cgroup_link *link;struct bpf_cgroup_storage *storage[MAX_BPF_CGROUP_STORAGE_TYPE ];
kernel/bpf/cgroup.c +44 -32
240 lines not on this page · raw message
Signature · 1 line
2.36.1.476.g0c4daa206d-goog
Re: [PATCH bpf-next v9 02/10] bpf: convert cgroup_bpf.progs to hlist
Quoted 44 lines · Stanislav Fomichev
This lets us reclaim some space to be used by new cgroup lsm slots.
Before:
struct cgroup_bpf { struct bpf_prog_array * effective[23]; /* 0 184 */ /* --- cacheline 2 boundary (128 bytes) was 56 bytes ago --- */ struct list_head progs[23]; /* 184 368 */ /* --- cacheline 8 boundary (512 bytes) was 40 bytes ago --- */ u32 flags[23]; /* 552 92 */ /* XXX 4 bytes hole, try to pack */ /* --- cacheline 10 boundary (640 bytes) was 8 bytes ago --- */ struct list_head storages; /* 648 16 */ struct bpf_prog_array * inactive; /* 664 8 */ struct percpu_ref refcnt; /* 672 16 */ struct work_struct release_work; /* 688 32 */ /* size: 720, cachelines: 12, members: 7 */ /* sum members: 716, holes: 1, sum holes: 4 */ /* last cacheline: 16 bytes */ };After:
struct cgroup_bpf { struct bpf_prog_array * effective[23]; /* 0 184 */ /* --- cacheline 2 boundary (128 bytes) was 56 bytes ago --- */ struct hlist_head progs[23]; /* 184 184 */ /* --- cacheline 5 boundary (320 bytes) was 48 bytes ago --- */ u8 flags[23]; /* 368 23 */ /* XXX 1 byte hole, try to pack */ /* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */ struct list_head storages; /* 392 16 */ struct bpf_prog_array * inactive; /* 408 8 */ struct percpu_ref refcnt; /* 416 16 */ struct work_struct release_work; /* 432 72 */ /* size: 504, cachelines: 8, members: 7 */ /* sum members: 503, holes: 1, sum holes: 1 */ /* last cacheline: 56 bytes */ };
Quoted 3 lines
Suggested-by Jakub Sitnicki <[email protected]>Reviewed-by Jakub Sitnicki <[email protected]>Signed-off-by Stanislav Fomichev <[email protected]>
PATCH v9 3/10 bpf: per-cgroup lsm flavor
In reply to Stanislav FomichevAllow attaching to lsm hooks in the cgroup context.
Attaching to per-cgroup LSM works exactly like attaching to other per-cgroup hooks. New BPF_LSM_CGROUP is added to trigger new mode; the actual lsm hook we attach to is signaled via existing attach_btf_id.
For the hooks that have 'struct socket' or 'struct sock' as its first argument, we use the cgroup associated with that socket. For the rest, we use 'current' cgroup (this is all on default hierarchy == v2 only). Note that for some hooks that work on 'struct sock' we still take the cgroup from 'current' because some of them work on the socket that hasn't been properly initialized yet.
Behind the scenes, we allocate a shim program that is attached to the trampoline and runs cgroup effective BPF programs array. This shim has some rudimentary ref counting and can be shared between several programs attaching to the same per-cgroup lsm hook.
Note that this patch bloats cgroup size because we add 211 cgroup_bpf_attach_type(s) for simplicity sake. This will be addressed in the subsequent patch.
Also note that we only add non-sleepable flavor for now. To enable sleepable use-cases, bpf_prog_run_array_cg has to grab trace rcu, shim programs have to be freed via trace rcu, cgroup_bpf.effective should be also trace-rcu-managed + maybe some other changes that I'm not aware of.
--- arch/x86/net/bpf_jit_comp.c | 24 ++-- include/linux/bpf-cgroup-defs.h | 8 ++ include/linux/bpf-cgroup.h | 7 ++ include/linux/bpf.h | 24 ++++ include/linux/bpf_lsm.h | 13 +++ include/linux/btf_ids.h | 3 +- include/uapi/linux/bpf.h | 1 + kernel/bpf/bpf_lsm.c | 48 ++++++++ kernel/bpf/btf.c | 11 ++ kernel/bpf/cgroup.c | 139 ++++++++++++++++++++-- kernel/bpf/core.c | 2 + kernel/bpf/syscall.c | 10 ++ kernel/bpf/trampoline.c | 198 ++++++++++++++++++++++++++++++++ kernel/bpf/verifier.c | 32 ++++++ tools/include/linux/btf_ids.h | 4 +- tools/include/uapi/linux/bpf.h | 1 + 16 files changed, 504 insertions(+), 21 deletions(-)
arch/x86/net/bpf_jit_comp.c +16 -8
@@ -1770,6 +1770,10 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog, struct bpf_tramp_link *l, int stack_size, int run_ctx_off, bool save_ret) { + void (*exit)(struct bpf_prog *prog, u64 start, +struct bpf_tramp_run_ctx *run_ctx) = __bpf_prog_exit; +u64 (*enter)(struct bpf_prog *prog, +struct bpf_tramp_run_ctx *run_ctx) = __bpf_prog_enter;u8 *prog = *pprog;u8 *jmp_insn;int ctx_cookie_off = offsetof(struct bpf_tramp_run_ctx , bpf_cookie);
@@ -1788,15 +1792,21 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog,*/ emit_stx (&prog,BPF_DW ,BPF_REG_FP ,BPF_REG_1 , -run_ctx_off + ctx_cookie_off); +if (p->aux->sleepable) { + enter = __bpf_prog_enter_sleepable; + exit = __bpf_prog_exit_sleepable; + }else if (p->expected_attach_type ==BPF_LSM_CGROUP ) { + enter = __bpf_prog_enter_lsm_cgroup; + exit = __bpf_prog_exit_lsm_cgroup; + } +/* arg1: mov rdi, progs[i] */ emit_mov_imm64 (&prog,BPF_REG_1 , (long ) p >>32 , (u32 ) (long ) p);/* arg2: lea rsi, [rbp - ctx_cookie_off] */ EMIT4 (0x48 ,0x8D ,0x75 , -run_ctx_off); -if (emit_call (&prog, - p->aux->sleepable ? __bpf_prog_enter_sleepable : - __bpf_prog_enter, prog)) -return -EINVAL ; +if (emit_call (&prog, enter, prog)) +return -EINVAL ;/* remember prog start time returned by __bpf_prog_enter */ emit_mov_reg (&prog, true,BPF_REG_6 ,BPF_REG_0 );
@@ -1840,10 +1850,8 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog,emit_mov_reg (&prog, true,BPF_REG_2 ,BPF_REG_6 );/* arg3: lea rdx, [rbp - run_ctx_off] */ EMIT4 (0x48 ,0x8D ,0x55 , -run_ctx_off); -if (emit_call (&prog, - p->aux->sleepable ? __bpf_prog_exit_sleepable : - __bpf_prog_exit, prog)) -return -EINVAL ; +if (emit_call (&prog, exit, prog)) +return -EINVAL ; *pprog = prog;return 0 ;
include/linux/bpf-cgroup-defs.h +8 -0
@@ -10,6 +10,12 @@struct bpf_prog_array ; +#ifdef CONFIG_BPF_LSM +#define CGROUP_LSM_NUM 211/* will be addressed in the next patch */ +#else +#define CGROUP_LSM_NUM 0 +#endif +enum cgroup_bpf_attach_type {CGROUP_BPF_ATTACH_TYPE_INVALID =-1 ,CGROUP_INET_INGRESS =0 ,
@@ -35,6 +41,8 @@ enum cgroup_bpf_attach_type {CGROUP_INET4_GETSOCKNAME ,CGROUP_INET6_GETSOCKNAME ,CGROUP_INET_SOCK_RELEASE , +CGROUP_LSM_START , +CGROUP_LSM_END =CGROUP_LSM_START +CGROUP_LSM_NUM -1 , MAX_CGROUP_BPF_ATTACH_TYPE };
include/linux/bpf-cgroup.h +7 -0
@@ -23,6 +23,13 @@ struct ctl_table;struct ctl_table_header ;struct task_struct ; +unsigned int __cgroup_bpf_run_lsm_sock (const void *ctx, +const struct bpf_insn *insn); +unsigned int __cgroup_bpf_run_lsm_socket (const void *ctx, +const struct bpf_insn *insn); +unsigned int __cgroup_bpf_run_lsm_current (const void *ctx, +const struct bpf_insn *insn); +#ifdef CONFIG_CGROUP_BPF #define CGROUP_ATYPE (type) \
include/linux/bpf.h +24 -0
@@ -778,6 +778,10 @@ void notrace __bpf_prog_exit(struct bpf_prog *prog, u64 start, struct bpf_tramp_ u64 notrace __bpf_prog_enter_sleepable(struct bpf_prog *prog, struct bpf_tramp_run_ctx *run_ctx); void notrace __bpf_prog_exit_sleepable(struct bpf_prog *prog, u64 start,struct bpf_tramp_run_ctx *run_ctx); +u64 notrace __bpf_prog_enter_lsm_cgroup(struct bpf_prog *prog, +struct bpf_tramp_run_ctx *run_ctx); +void notrace __bpf_prog_exit_lsm_cgroup(struct bpf_prog *prog, u64 start, +struct bpf_tramp_run_ctx *run_ctx); void notrace __bpf_tramp_enter(struct bpf_tramp_image *tr); void notrace __bpf_tramp_exit(struct bpf_tramp_image *tr);
@@ -1044,6 +1048,7 @@ struct bpf_prog_aux {struct user_struct *user;u64 load_time;/* ns since boottime */ u32 verified_insns; +int cgroup_atype;/* enum cgroup_bpf_attach_type */ struct bpf_map *cgroup_storage[MAX_BPF_CGROUP_STORAGE_TYPE ];char name[BPF_OBJ_NAME_LEN ];#ifdef CONFIG_SECURITY
@@ -1117,6 +1122,11 @@ struct bpf_tramp_link {u64 cookie; }; +struct bpf_shim_tramp_link { +struct bpf_tramp_link link; +struct bpf_trampoline *trampoline; +}; +struct bpf_tracing_link {struct bpf_tramp_link link;enum bpf_attach_type attach_type;
@@ -1195,6 +1205,9 @@ struct bpf_dummy_ops {int bpf_struct_ops_test_run (struct bpf_prog *prog,const union bpf_attr *kattr,union bpf_attr __user *uattr);#endif +int bpf_trampoline_link_cgroup_shim (struct bpf_prog *prog, +int cgroup_atype); +void bpf_trampoline_unlink_cgroup_shim (struct bpf_prog *prog);#else static inline const struct bpf_struct_ops *bpf_struct_ops_find (u32 type_id) {
@@ -1218,6 +1231,14 @@ static inline int bpf_struct_ops_map_sys_lookup_elem(struct bpf_map *map, {return -EINVAL ; } +static inline int bpf_trampoline_link_cgroup_shim (struct bpf_prog *prog, +int cgroup_atype) +{ +return -EOPNOTSUPP ; +} +static inline void bpf_trampoline_unlink_cgroup_shim (struct bpf_prog *prog) +{ +}#endif struct bpf_array {
@@ -2267,6 +2288,8 @@ extern const struct bpf_func_proto bpf_loop_proto;extern const struct bpf_func_proto bpf_strncmp_proto;extern const struct bpf_func_proto bpf_copy_from_user_task_proto;extern const struct bpf_func_proto bpf_kptr_xchg_proto; +extern const struct bpf_func_proto bpf_set_retval_proto; +extern const struct bpf_func_proto bpf_get_retval_proto;const struct bpf_func_proto *tracing_prog_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog);
@@ -2384,6 +2407,7 @@ int bpf_arch_text_invalidate(void *dst, size_t len);struct btf_id_set ;bool btf_id_set_contains (const struct btf_id_set *set,u32 id); +int btf_id_set_index (const struct btf_id_set *set,u32 id);#define MAX_BPRINTF_VARARGS 12
include/linux/bpf_lsm.h +13 -0
@@ -42,6 +42,9 @@ extern const struct bpf_func_proto bpf_inode_storage_get_proto;extern const struct bpf_func_proto bpf_inode_storage_delete_proto;void bpf_inode_storage_free (struct inode *inode); +int bpf_lsm_hook_idx (u32 btf_id); +void bpf_lsm_find_cgroup_shim (const struct bpf_prog *prog,bpf_func_t *bpf_func); +#else /* !CONFIG_BPF_LSM */ static inline bool bpf_lsm_is_sleepable_hook (u32 btf_id)
@@ -65,6 +68,16 @@ static inline void bpf_inode_storage_free(struct inode *inode) { } +static inline void bpf_lsm_find_cgroup_shim (const struct bpf_prog *prog, +bpf_func_t *bpf_func) +{ +} + +static inline int bpf_lsm_hook_idx (u32 btf_id) +{ +return -EINVAL ; +} +#endif /* CONFIG_BPF_LSM */ #endif /* _LINUX_BPF_LSM_H */
include/linux/btf_ids.h +2 -1
@@ -179,7 +179,8 @@ extern struct btf_id_set name; BTF_SOCK_TYPE(BTF_SOCK_TYPE_UDP, udp_sock) \ BTF_SOCK_TYPE(BTF_SOCK_TYPE_UDP6, udp6_sock) \ BTF_SOCK_TYPE(BTF_SOCK_TYPE_UNIX, unix_sock) \ - BTF_SOCK_TYPE(BTF_SOCK_TYPE_MPTCP, mptcp_sock) + BTF_SOCK_TYPE(BTF_SOCK_TYPE_MPTCP, mptcp_sock) \ + BTF_SOCK_TYPE(BTF_SOCK_TYPE_SOCKET, socket) enum {#define BTF_SOCK_TYPE (name, str) name,
include/uapi/linux/bpf.h +1 -0
@@ -998,6 +998,7 @@ enum bpf_attach_type {BPF_SK_REUSEPORT_SELECT_OR_MIGRATE ,BPF_PERF_EVENT ,BPF_TRACE_KPROBE_MULTI , +BPF_LSM_CGROUP , __MAX_BPF_ATTACH_TYPE };
kernel/bpf/bpf_lsm.c +48 -0
66 lines not on this page · raw message
kernel/bpf/btf.c +11 -0
@@ -5363,6 +5363,7 @@ bool btf_ctx_access(int off, int size, enum bpf_access_type type,if (arg == nr_args) {switch (prog->expected_attach_type) { +case BPF_LSM_CGROUP :case BPF_LSM_MAC :case BPF_TRACE_FEXIT :/* When LSM programs are attached to void LSM hooks
@@ -6841,6 +6842,16 @@ static int btf_id_cmp_func(const void *a, const void *b)return *pa - *pb; } +int btf_id_set_index (const struct btf_id_set *set,u32 id) +{ +const u32 *p; + + p =bsearch (&id, set->ids, set->cnt,sizeof (u32), btf_id_cmp_func); +if (!p) +return -1 ; +return p - set->ids; +} +bool btf_id_set_contains (const struct btf_id_set *set,u32 id) {return bsearch (&id, set->ids, set->cnt,sizeof (u32), btf_id_cmp_func) !=NULL ;
kernel/bpf/cgroup.c +128 -11
218 lines not on this page · raw message
kernel/bpf/core.c +2 -0
@@ -2651,6 +2651,8 @@ const struct bpf_func_proto bpf_get_local_storage_proto __weak;const struct bpf_func_proto bpf_get_ns_current_pid_tgid_proto__weak ;const struct bpf_func_proto bpf_snprintf_btf_proto__weak ;const struct bpf_func_proto bpf_seq_printf_btf_proto__weak ; +const struct bpf_func_proto bpf_set_retval_proto__weak ; +const struct bpf_func_proto bpf_get_retval_proto__weak ;const struct bpf_func_proto *__weak bpf_get_trace_printk_proto (void ) {
kernel/bpf/syscall.c +10 -0
@@ -3416,6 +3416,8 @@ attach_type_to_prog_type(enum bpf_attach_type attach_type)return BPF_PROG_TYPE_SK_LOOKUP ;case BPF_XDP :return BPF_PROG_TYPE_XDP ; +case BPF_LSM_CGROUP : +return BPF_PROG_TYPE_LSM ;default :return BPF_PROG_TYPE_UNSPEC ; }
@@ -3469,6 +3471,11 @@ static int bpf_prog_attach(const union bpf_attr *attr)case BPF_PROG_TYPE_CGROUP_SOCKOPT :case BPF_PROG_TYPE_CGROUP_SYSCTL :case BPF_PROG_TYPE_SOCK_OPS : +case BPF_PROG_TYPE_LSM : +if (ptype ==BPF_PROG_TYPE_LSM && + prog->expected_attach_type !=BPF_LSM_CGROUP ) +return -EINVAL ; + ret =cgroup_bpf_prog_attach (attr, ptype, prog);break ;default :
@@ -3506,6 +3513,7 @@ static int bpf_prog_detach(const union bpf_attr *attr)case BPF_PROG_TYPE_CGROUP_SOCKOPT :case BPF_PROG_TYPE_CGROUP_SYSCTL :case BPF_PROG_TYPE_SOCK_OPS : +case BPF_PROG_TYPE_LSM :return cgroup_bpf_prog_detach (attr, ptype);default :return -EINVAL ;
@@ -4540,6 +4548,8 @@ static int link_create(union bpf_attr *attr, bpfptr_t uattr) ret =bpf_raw_tp_link_attach (prog,NULL ); else if (prog->expected_attach_type == BPF_TRACE_ITER) ret =bpf_iter_link_attach (attr, uattr, prog); + else if (prog->expected_attach_type == BPF_LSM_CGROUP) + ret =cgroup_bpf_link_attach (attr, prog); else ret = bpf_tracing_prog_attach(prog, attr->link_create.target_fd,
kernel/bpf/trampoline.c +198 -0
216 lines not on this page · raw message
kernel/bpf/verifier.c +32 -0
@@ -7264,6 +7264,18 @@ static int check_helper_call(struct bpf_verifier_env *env, struct bpf_insn *insn reg_type_str(env, regs[BPF_REG_1].type));return -EACCES ; } +break ; +case BPF_FUNC_set_retval: +if (env->prog->expected_attach_type ==BPF_LSM_CGROUP ) { +if (!env->prog->aux->attach_func_proto->type) { +/* Make sure programs that attach to void +* hooks don't try to modify return value. +*/ +verbose (env,"BPF_LSM_CGROUP that attach to void LSM hooks can't modify return value!\n" ); +return -EINVAL ; + } + } +break ; }if (err)
@@ -10474,6 +10486,22 @@ static int check_return_code(struct bpf_verifier_env *env)case BPF_PROG_TYPE_SK_LOOKUP : range =tnum_range (SK_DROP ,SK_PASS );break ; + +case BPF_PROG_TYPE_LSM : +if (env->prog->expected_attach_type !=BPF_LSM_CGROUP ) { +/* Regular BPF_PROG_TYPE_LSM programs can return +* any value. +*/ +return 0 ; + } +if (!env->prog->aux->attach_func_proto->type) { +/* Make sure programs that attach to void +* hooks don't try to modify return value. +*/ + range =tnum_range (1 ,1 ); + } +break ; +case BPF_PROG_TYPE_EXT :/* freplace program can return anything as its return value * depends on the to-be-replaced kernel func or bpf program.
@@ -10490,6 +10518,9 @@ static int check_return_code(struct bpf_verifier_env *env)if (!tnum_in (range, reg->var_off)) {verbose_invalid_scalar (env, reg, &range,"program exit" ,"R0" ); +if (prog->expected_attach_type ==BPF_LSM_CGROUP && + !prog->aux->attach_func_proto->type) +verbose (env,"Note, BPF_LSM_CGROUP that attach to void LSM hooks can't modify return value!\n" );return -EINVAL ; }
@@ -14713,6 +14744,7 @@ int bpf_check_attach_target(struct bpf_verifier_log *log, fallthrough;case BPF_MODIFY_RETURN :case BPF_LSM_MAC : +case BPF_LSM_CGROUP :case BPF_TRACE_FENTRY :case BPF_TRACE_FEXIT :if (!btf_type_is_func (t)) {
tools/include/linux/btf_ids.h +3 -1
@@ -172,7 +172,9 @@ extern struct btf_id_set name; BTF_SOCK_TYPE(BTF_SOCK_TYPE_TCP_TW, tcp_timewait_sock) \ BTF_SOCK_TYPE(BTF_SOCK_TYPE_TCP6, tcp6_sock) \ BTF_SOCK_TYPE(BTF_SOCK_TYPE_UDP, udp_sock) \ - BTF_SOCK_TYPE(BTF_SOCK_TYPE_UDP6, udp6_sock) + BTF_SOCK_TYPE(BTF_SOCK_TYPE_UDP6, udp6_sock) \ + BTF_SOCK_TYPE(BTF_SOCK_TYPE_UNIX, unix_sock) \ + BTF_SOCK_TYPE(BTF_SOCK_TYPE_SOCKET, socket) enum {#define BTF_SOCK_TYPE (name, str) name,
tools/include/uapi/linux/bpf.h +1 -0
@@ -998,6 +998,7 @@ enum bpf_attach_type {BPF_SK_REUSEPORT_SELECT_OR_MIGRATE ,BPF_PERF_EVENT ,BPF_TRACE_KPROBE_MULTI , +BPF_LSM_CGROUP , __MAX_BPF_ATTACH_TYPE };
Signature · 1 line
2.36.1.476.g0c4daa206d-goog
Re: [PATCH bpf-next v9 03/10] bpf: per-cgroup lsm flavor
Quoted 14 lines · Stanislav Fomichev
Allow attaching to lsm hooks in the cgroup context.
Attaching to per-cgroup LSM works exactly like attaching to other per-cgroup hooks. New
BPF_LSM_CGROUPis added to trigger new mode; the actual lsm hook we attach to is signaled via existingattach_btf_id.For the hooks that have 'struct socket' or 'struct sock' as its first argument, we use the cgroup associated with that socket. For the rest, we use 'current' cgroup (this is all on default hierarchy == v2 only). Note that for some hooks that work on 'struct sock' we still take the cgroup from 'current' because some of them work on the socket that hasn't been properly initialized yet.
Quoted 4 lines
Behind the scenes, we allocate a shim program that is attached to the trampoline and runs cgroup effective BPF programs array. This shim has some rudimentary ref counting and can be shared between several programs attaching to the same per-cgroup lsm hook.
nit. The 'per-cgroup' may be read as each cgroup has its own shim. It will be useful to rephrase it a little.
Quoted 12 lines
Note that this patch bloats cgroup size because we add 211
cgroup_bpf_attach_type(s)for simplicity sake. This will be addressed in the subsequent patch.Also note that we only add non-sleepable flavor for now. To enable sleepable use-cases,
bpf_prog_run_array_cghas to grab trace rcu, shim programs have to be freed via trace rcu, cgroup_bpf.effective should be also trace-rcu-managed + maybe some other changes that I'm not aware of.Signed-off-by Stanislav Fomichev <[email protected]>
[ ... ]
Quoted 31 lines
arch/x86/net/bpf_jit_comp.c +2
-4@@ -1840,10 +1850,8 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog,emit_mov_reg (&prog, true,BPF_REG_2 ,BPF_REG_6 );/* arg3: lea rdx, [rbp - run_ctx_off] */ EMIT4 (0x48 ,0x8D ,0x55 , -run_ctx_off); -if (emit_call (&prog, - p->aux->sleepable ? __bpf_prog_exit_sleepable : - __bpf_prog_exit, prog)) -return -EINVAL ; +if (emit_call (&prog, exit, prog)) +return -EINVAL ; *pprog = prog;return 0 ;include/linux/bpf-cgroup-defs.h +6
-0@@ -10,6 +10,12 @@struct bpf_prog_array ; +#ifdef CONFIG_BPF_LSM +#define CGROUP_LSM_NUM 211/* will be addressed in the next patch */ +#else +#define CGROUP_LSM_NUM 0 +#endif +enum cgroup_bpf_attach_type {CGROUP_BPF_ATTACH_TYPE_INVALID =-1 ,CGROUP_INET_INGRESS =0 ,
include/linux/bpf-cgroup-defs.h enum cgroup_bpf_attach_type { · line 45
Quoted 5 lines
include/linux/bpf-cgroup-defs.h +2
-0@@ -35,6 +41,8 @@ enum cgroup_bpf_attach_type {CGROUP_INET4_GETSOCKNAME ,CGROUP_INET6_GETSOCKNAME ,CGROUP_INET_SOCK_RELEASE , +CGROUP_LSM_START , + CGROUP_LSM_END = CGROUP_LSM_START + CGROUP_LSM_NUM - 1,
Likely a dumb question, just in case, presumably everything should be fine when CGROUP_LSM_NUM is 0 ?
Quoted 3 lines
include/linux/bpf-cgroup-defs.h +0
-0MAX_CGROUP_BPF_ATTACH_TYPE };
[ ... ]
Quoted 62 lines
kernel/bpf/cgroup.c +47
-0@@ -14,6 +14,8 @@#include <linux/string.h> #include <linux/bpf.h> #include <linux/bpf-cgroup.h> +#include <linux/bpf_lsm.h> +#include <linux/bpf_verifier.h> #include <net/sock.h> #include <net/bpf_sk_storage.h> @@ -61,6 +63,88 @@ bpf_prog_run_array_cg(const struct cgroup_bpf *cgrp,return run_ctx.retval; } +unsigned int __cgroup_bpf_run_lsm_sock (const void *ctx, +const struct bpf_insn *insn) +{ +const struct bpf_prog *shim_prog; +struct sock *sk; +struct cgroup *cgrp; +int ret =0 ; +u64 *args; + + args = (u64 *)ctx; + sk = (void *)(unsigned long )args[0 ]; +/*shim_prog = container_of(insn, struct bpf_prog, insnsi);*/ + shim_prog = (const struct bpf_prog *)((void *)insn - offsetof(struct bpf_prog , insnsi)); + + cgrp =sock_cgroup_ptr (&sk->sk_cgrp_data); +if (likely (cgrp)) + ret =bpf_prog_run_array_cg (&cgrp->bpf, + shim_prog->aux->cgroup_atype, + ctx, bpf_prog_run,0 ,NULL ); +return ret; +} + +unsigned int __cgroup_bpf_run_lsm_socket (const void *ctx, +const struct bpf_insn *insn) +{ +const struct bpf_prog *shim_prog; +struct socket *sock; +struct cgroup *cgrp; +int ret =0 ; +u64 *args; + + args = (u64 *)ctx; + sock = (void *)(unsigned long )args[0 ]; +/*shim_prog = container_of(insn, struct bpf_prog, insnsi);*/ + shim_prog = (const struct bpf_prog *)((void *)insn - offsetof(struct bpf_prog , insnsi)); + + cgrp =sock_cgroup_ptr (&sock->sk->sk_cgrp_data); +if (likely (cgrp)) + ret =bpf_prog_run_array_cg (&cgrp->bpf, + shim_prog->aux->cgroup_atype, + ctx, bpf_prog_run,0 ,NULL ); +return ret; +} + +unsigned int __cgroup_bpf_run_lsm_current(const void *ctx,
kernel/bpf/cgroup.c bpf_prog_run_array_cg(const struct cgroup_bpf *cgrp, · line 120
Quoted 10 lines
kernel/bpf/cgroup.c +10
-0+ const struct bpf_insn *insn) +{ +const struct bpf_prog *shim_prog; +struct cgroup *cgrp; +int ret =0 ; + +/*shim_prog = container_of(insn, struct bpf_prog, insnsi);*/ + shim_prog = (const struct bpf_prog *)((void *)insn - offsetof(struct bpf_prog , insnsi)); + +rcu_read_lock ();
nit. Not needed. May be a comment about it has been acquired in __bpf_prog_enter_lsm_cgroup(). For sleepable in the future, rcu_read_lock() cannot be done here also.
Quoted 31 lines
kernel/bpf/cgroup.c +27
-0+ cgrp =task_dfl_cgroup (current); +if (likely (cgrp)) + ret =bpf_prog_run_array_cg (&cgrp->bpf, + shim_prog->aux->cgroup_atype, + ctx, bpf_prog_run,0 ,NULL ); +rcu_read_unlock (); +return ret; +} + +#ifdef CONFIG_BPF_LSM +static enum cgroup_bpf_attach_type +bpf_cgroup_atype_find (enum bpf_attach_type attach_type,u32 attach_btf_id) +{ +if (attach_type !=BPF_LSM_CGROUP ) +return to_cgroup_bpf_attach_type (attach_type); +return CGROUP_LSM_START +bpf_lsm_hook_idx (attach_btf_id); +} +#else +static enum cgroup_bpf_attach_type +bpf_cgroup_atype_find (enum bpf_attach_type attach_type,u32 attach_btf_id) +{ +if (attach_type !=BPF_LSM_CGROUP ) +return to_cgroup_bpf_attach_type (attach_type); +return -EOPNOTSUPP ; +} +#endif /* CONFIG_BPF_LSM */ +void cgroup_bpf_offline (struct cgroup *cgrp) {cgroup_get (cgrp);
kernel/bpf/cgroup.c static void cgroup_bpf_release(struct work_struct *work) · line 251
Quoted 6 lines
kernel/bpf/cgroup.c +2
-1@@ -163,10 +247,20 @@ static void cgroup_bpf_release(struct work_struct *work)hlist_for_each_entry_safe (pl, pltmp, progs, node) {hlist_del (&pl->node); -if (pl->prog) +if (pl->prog) { +#ifdef CONFIG_BPF_LSM
This should not be needed as it is not needed in __cgroup_bpf_attach() below.
kernel/bpf/cgroup.c static void cgroup_bpf_release(struct work_struct *work) · line 258
Quoted 8 lines
kernel/bpf/cgroup.c +6
-1+if (pl->prog->expected_attach_type ==BPF_LSM_CGROUP ) +bpf_trampoline_unlink_cgroup_shim (pl->prog); +#endif bpf_prog_put (pl->prog); -if (pl->link) + } +if (pl->link) { +#ifdef CONFIG_BPF_LSM
Same here.
Quoted 86 lines
kernel/bpf/cgroup.c +30
-6+if (pl->link->link.prog->expected_attach_type ==BPF_LSM_CGROUP ) +bpf_trampoline_unlink_cgroup_shim (pl->link->link.prog); +#endif bpf_cgroup_link_auto_detach (pl->link); + }kfree (pl);static_branch_dec (&cgroup_bpf_enabled_key[atype]); }@@ -479,6 +573,7 @@ static int __cgroup_bpf_attach(struct cgroup *cgrp,struct bpf_prog *old_prog =NULL ;struct bpf_cgroup_storage *storage[MAX_BPF_CGROUP_STORAGE_TYPE ] = {};struct bpf_cgroup_storage *new_storage[MAX_BPF_CGROUP_STORAGE_TYPE ] = {}; +struct bpf_prog *new_prog = prog ? : link->link.prog;enum cgroup_bpf_attach_type atype;struct bpf_prog_list *pl;struct hlist_head *progs;@@ -495,7 +590,7 @@ static int __cgroup_bpf_attach(struct cgroup *cgrp,/* replace_prog implies BPF_F_REPLACE, and vice versa */ return -EINVAL ; - atype =to_cgroup_bpf_attach_type (type); + atype =bpf_cgroup_atype_find (type, new_prog->aux->attach_btf_id);if (atype <0 )return -EINVAL ;@@ -549,17 +644,30 @@ static int __cgroup_bpf_attach(struct cgroup *cgrp,bpf_cgroup_storages_assign (pl->storage, storage); cgrp->bpf.flags[atype] = saved_flags; +if (type ==BPF_LSM_CGROUP ) { + err =bpf_trampoline_link_cgroup_shim (new_prog, atype); +if (err) + goto cleanup; + } + err =update_effective_progs (cgrp, atype);if (err) - goto cleanup; + goto cleanup_trampoline; -if (old_prog) +if (old_prog) { +if (type ==BPF_LSM_CGROUP ) +bpf_trampoline_unlink_cgroup_shim (old_prog);bpf_prog_put (old_prog); -else + }else {static_branch_inc (&cgroup_bpf_enabled_key[atype]); + }bpf_cgroup_storages_link (new_storage, cgrp, type);return 0 ; +cleanup_trampoline: +if (type ==BPF_LSM_CGROUP ) +bpf_trampoline_unlink_cgroup_shim (new_prog); + cleanup:if (old_prog) { pl->prog = old_prog;@@ -651,7 +759,7 @@ static int __cgroup_bpf_replace(struct cgroup *cgrp,struct hlist_head *progs;bool found = false; - atype =to_cgroup_bpf_attach_type (link->type); + atype =bpf_cgroup_atype_find (link->type, new_prog->aux->attach_btf_id);if (atype <0 )return -EINVAL ;@@ -803,9 +911,15 @@ static int __cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog,struct bpf_prog *old_prog;struct bpf_prog_list *pl;struct hlist_head *progs; +u32 attach_btf_id =0 ;u32 flags; - atype =to_cgroup_bpf_attach_type (type); +if (prog) + attach_btf_id = prog->aux->attach_btf_id; +if (link) + attach_btf_id = link->link.prog->aux->attach_btf_id; + + atype =bpf_cgroup_atype_find (type, attach_btf_id);if (atype <0 )return -EINVAL ;
kernel/bpf/cgroup.c static int __cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog, · line 958
Quoted 7 lines
kernel/bpf/cgroup.c +3
-1@@ -839,8 +953,11 @@ static int __cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog,if (hlist_empty (progs))/* last program was detached, reset flags to zero */ cgrp->bpf.flags[atype] =0 ; -if (old_prog) +if (old_prog) { +if (type ==BPF_LSM_CGROUP ) +bpf_trampoline_unlink_cgroup_shim (old_prog);
I think the same bpf_trampoline_unlink_cgroup_shim() needs to be done in bpf_cgroup_link_release()? It should be done just after WARN_ON(__cgroup_bpf_detach()).
[ ... ]
Quoted 14 lines
kernel/bpf/syscall.c +2
-0@@ -3416,6 +3416,8 @@ attach_type_to_prog_type(enum bpf_attach_type attach_type)return BPF_PROG_TYPE_SK_LOOKUP ;case BPF_XDP :return BPF_PROG_TYPE_XDP ; +case BPF_LSM_CGROUP : +return BPF_PROG_TYPE_LSM ;default :return BPF_PROG_TYPE_UNSPEC ; }
kernel/bpf/syscall.c static int bpf_prog_attach(const union bpf_attr *attr) · line 3476
Quoted 6 lines
kernel/bpf/syscall.c +3
-0@@ -3469,6 +3471,11 @@ static int bpf_prog_attach(const union bpf_attr *attr)case BPF_PROG_TYPE_CGROUP_SOCKOPT :case BPF_PROG_TYPE_CGROUP_SYSCTL :case BPF_PROG_TYPE_SOCK_OPS : +case BPF_PROG_TYPE_LSM : +if (ptype ==BPF_PROG_TYPE_LSM && + prog->expected_attach_type !=BPF_LSM_CGROUP )
Check this in bpf_prog_attach_check_attach_type() where other expected_attach_type are enforced.
kernel/bpf/syscall.c static int bpf_prog_attach(const union bpf_attr *attr)
Quoted 13 lines
kernel/bpf/syscall.c +13
-0+void bpf_trampoline_unlink_cgroup_shim (struct bpf_prog *prog) +{ +struct bpf_shim_tramp_link *shim_link =NULL ; +struct bpf_trampoline *tr; +bpf_func_t bpf_func; +u64 key; + + key =bpf_trampoline_compute_key (NULL , prog->aux->attach_btf, + prog->aux->attach_btf_id); + +bpf_lsm_find_cgroup_shim (prog, &bpf_func); + tr =bpf_trampoline_lookup (key); +if (!tr)
nit. !tr should not be possible? If not, may be a WARN_ON_ONCE() or remove this check.
Quoted 12 lines
kernel/bpf/syscall.c +12
-0+return ; + +mutex_lock (&tr->mutex); + shim_link =cgroup_shim_find (tr, bpf_func); +mutex_unlock (&tr->mutex); + +if (shim_link) +bpf_link_put (&shim_link->link.link); + + bpf_trampoline_put(tr); /* bpf_trampoline_lookup above */ +} +#endif
[ ... ]
tools/include/linux/btf_ids.h extern struct btf_id_set name; · line 176
Quoted 11 lines
tools/include/linux/btf_ids.h +2
-1@@ -172,7 +172,9 @@ extern struct btf_id_set name; BTF_SOCK_TYPE(BTF_SOCK_TYPE_TCP_TW, tcp_timewait_sock) \ BTF_SOCK_TYPE(BTF_SOCK_TYPE_TCP6, tcp6_sock) \ BTF_SOCK_TYPE(BTF_SOCK_TYPE_UDP, udp_sock) \ -BTF_SOCK_TYPE (BTF_SOCK_TYPE_UDP6 , udp6_sock) + BTF_SOCK_TYPE(BTF_SOCK_TYPE_UDP6, udp6_sock) \ +BTF_SOCK_TYPE (BTF_SOCK_TYPE_UNIX , unix_sock) \
The existing tools's btf_ids.h looks more outdated from
the kernel's btf_ids.h. unix_sock is missing which is added back here. mptcp_sock is missing also but not added. I assume the latter test needs unix_sock here ?
Others lgtm.
Re: [PATCH bpf-next v9 03/10] bpf: per-cgroup lsm flavor
Quoted 16 lines · Martin KaFai Lau
Quoted 14 lines · Stanislav Fomichev
Allow attaching to lsm hooks in the cgroup context.
Attaching to per-cgroup LSM works exactly like attaching to other per-cgroup hooks. New
BPF_LSM_CGROUPis added to trigger new mode; the actual lsm hook we attach to is signaled via existingattach_btf_id.For the hooks that have 'struct socket' or 'struct sock' as its first argument, we use the cgroup associated with that socket. For the rest, we use 'current' cgroup (this is all on default hierarchy == v2 only). Note that for some hooks that work on 'struct sock' we still take the cgroup from 'current' because some of them work on the socket that hasn't been properly initialized yet.
Quoted 6 lines
Quoted 4 lines
Behind the scenes, we allocate a shim program that is attached to the trampoline and runs cgroup effective BPF programs array. This shim has some rudimentary ref counting and can be shared between several programs attaching to the same per-cgroup lsm hook.
nit. The 'per-cgroup' may be read as each cgroup has its own shim. It will be useful to rephrase it a little.
I'll put the following, LMK if still not clear.
This shim has some rudimentary ref counting and can be shared between several programs attaching to the same lsm hook from different cgroups.
Quoted 45 lines
Quoted 12 lines
Note that this patch bloats cgroup size because we add 211
cgroup_bpf_attach_type(s)for simplicity sake. This will be addressed in the subsequent patch.Also note that we only add non-sleepable flavor for now. To enable sleepable use-cases,
bpf_prog_run_array_cghas to grab trace rcu, shim programs have to be freed via trace rcu, cgroup_bpf.effective should be also trace-rcu-managed + maybe some other changes that I'm not aware of.Signed-off-by Stanislav Fomichev <[email protected]>[ ... ]
Quoted 30 lines
arch/x86/net/bpf_jit_comp.c +2
-4@@ -1840,10 +1850,8 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog,emit_mov_reg (&prog, true,BPF_REG_2 ,BPF_REG_6 );/* arg3: lea rdx, [rbp - run_ctx_off] */ EMIT4 (0x48 ,0x8D ,0x55 , -run_ctx_off); -if (emit_call (&prog, - p->aux->sleepable ? __bpf_prog_exit_sleepable : - __bpf_prog_exit, prog)) -return -EINVAL ; +if (emit_call (&prog, exit, prog)) +return -EINVAL ; *pprog = prog;return 0 ;include/linux/bpf-cgroup-defs.h +6
-0@@ -10,6 +10,12 @@struct bpf_prog_array ; +#ifdef CONFIG_BPF_LSM +#define CGROUP_LSM_NUM 211/* will be addressed in the next patch */ +#else +#define CGROUP_LSM_NUM 0 +#endif +enum cgroup_bpf_attach_type {CGROUP_BPF_ATTACH_TYPE_INVALID =-1 ,CGROUP_INET_INGRESS =0 ,
Quoted 8 lines
include/linux/bpf-cgroup-defs.h enum cgroup_bpf_attach_type { · line 45
Quoted 6 lines
include/linux/bpf-cgroup-defs.h +2
-0@@ -35,6 +41,8 @@ enum cgroup_bpf_attach_type {CGROUP_INET4_GETSOCKNAME ,CGROUP_INET6_GETSOCKNAME ,CGROUP_INET_SOCK_RELEASE , +CGROUP_LSM_START , + CGROUP_LSM_END = CGROUP_LSM_START + CGROUP_LSM_NUM - 1,Likely a dumb question, just in case, presumably everything should be fine when
CGROUP_LSM_NUMis 0 ?
My thinking was:
Let's say CGROUP_INET_SOCK_RELEASE is 10. CGROUP_LSM_START should be
11. And CGROUP_LSM_END should be 10 again. This makes MAX_CGROUP_BPF_ATTACH_TYPE 11 and doesn't waste any slots when CONFIG_BPF_LSM=n.
The places where it might lead to problems are the loops like (or any other range checks):
for (i = CGROUP_LSM_START; i <= CGROUP_LSM_END; i++)
There was one issue in cgroup_bpf_release which we've replaced with 'pl->prog->expected_attach_type == BPF_LSM_CGROUP' and I think the other one in __cgroup_bpf_query should be fine.
Quoted 73 lines
Quoted 3 lines
include/linux/bpf-cgroup-defs.h +0
-0MAX_CGROUP_BPF_ATTACH_TYPE };[ ... ]
Quoted 67 lines
kernel/bpf/cgroup.c +52
-0@@ -14,6 +14,8 @@#include <linux/string.h> #include <linux/bpf.h> #include <linux/bpf-cgroup.h> +#include <linux/bpf_lsm.h> +#include <linux/bpf_verifier.h> #include <net/sock.h> #include <net/bpf_sk_storage.h> @@ -61,6 +63,88 @@ bpf_prog_run_array_cg(const struct cgroup_bpf *cgrp,return run_ctx.retval; } +unsigned int __cgroup_bpf_run_lsm_sock (const void *ctx, +const struct bpf_insn *insn) +{ +const struct bpf_prog *shim_prog; +struct sock *sk; +struct cgroup *cgrp; +int ret =0 ; +u64 *args; + + args = (u64 *)ctx; + sk = (void *)(unsigned long )args[0 ]; +/*shim_prog = container_of(insn, struct bpf_prog, insnsi);*/ + shim_prog = (const struct bpf_prog *)((void *)insn - offsetof(struct bpf_prog , insnsi)); + + cgrp =sock_cgroup_ptr (&sk->sk_cgrp_data); +if (likely (cgrp)) + ret =bpf_prog_run_array_cg (&cgrp->bpf, + shim_prog->aux->cgroup_atype, + ctx, bpf_prog_run,0 ,NULL ); +return ret; +} + +unsigned int __cgroup_bpf_run_lsm_socket (const void *ctx, +const struct bpf_insn *insn) +{ +const struct bpf_prog *shim_prog; +struct socket *sock; +struct cgroup *cgrp; +int ret =0 ; +u64 *args; + + args = (u64 *)ctx; + sock = (void *)(unsigned long )args[0 ]; +/*shim_prog = container_of(insn, struct bpf_prog, insnsi);*/ + shim_prog = (const struct bpf_prog *)((void *)insn - offsetof(struct bpf_prog , insnsi)); + + cgrp =sock_cgroup_ptr (&sock->sk->sk_cgrp_data); +if (likely (cgrp)) + ret =bpf_prog_run_array_cg (&cgrp->bpf, + shim_prog->aux->cgroup_atype, + ctx, bpf_prog_run,0 ,NULL ); +return ret; +} + +unsigned int __cgroup_bpf_run_lsm_current (const void *ctx, +const struct bpf_insn *insn) +{ +const struct bpf_prog *shim_prog; +struct cgroup *cgrp; +int ret =0 ;
Quoted 8 lines
kernel/bpf/cgroup.c bpf_prog_run_array_cg(const struct cgroup_bpf *cgrp, · line 120
Quoted 5 lines
kernel/bpf/cgroup.c +5
-0+ +/*shim_prog = container_of(insn, struct bpf_prog, insnsi);*/ + shim_prog = (const struct bpf_prog *)((void *)insn - offsetof(struct bpf_prog , insnsi)); + +rcu_read_lock ();nit. Not needed. May be a comment about it has been acquired in
__bpf_prog_enter_lsm_cgroup(). For sleepable in the future,rcu_read_lock()cannot be done here also.
True, will add a comment instead, thanks!
Quoted 32 lines
Quoted 32 lines
kernel/bpf/cgroup.c +27
-0+ cgrp =task_dfl_cgroup (current); +if (likely (cgrp)) + ret =bpf_prog_run_array_cg (&cgrp->bpf, + shim_prog->aux->cgroup_atype, + ctx, bpf_prog_run,0 ,NULL ); +rcu_read_unlock (); +return ret; +} + +#ifdef CONFIG_BPF_LSM +static enum cgroup_bpf_attach_type +bpf_cgroup_atype_find (enum bpf_attach_type attach_type,u32 attach_btf_id) +{ +if (attach_type !=BPF_LSM_CGROUP ) +return to_cgroup_bpf_attach_type (attach_type); +return CGROUP_LSM_START +bpf_lsm_hook_idx (attach_btf_id); +} +#else +static enum cgroup_bpf_attach_type +bpf_cgroup_atype_find (enum bpf_attach_type attach_type,u32 attach_btf_id) +{ +if (attach_type !=BPF_LSM_CGROUP ) +return to_cgroup_bpf_attach_type (attach_type); +return -EOPNOTSUPP ; +} +#endif /* CONFIG_BPF_LSM */ +void cgroup_bpf_offline (struct cgroup *cgrp) {cgroup_get (cgrp);@@ -163,10 +247,20 @@ static void cgroup_bpf_release(struct work_struct *work)
Quoted 6 lines
kernel/bpf/cgroup.c static void cgroup_bpf_release(struct work_struct *work) · line 251
Quoted 5 lines
kernel/bpf/cgroup.c +2
-1hlist_for_each_entry_safe (pl, pltmp, progs, node) {hlist_del (&pl->node); -if (pl->prog) +if (pl->prog) { +#ifdef CONFIG_BPF_LSM This should not be needed as it is not needed in
__cgroup_bpf_attach()below.
Oh yes, as I mentioned above, it's been here because I used to do if atype >= START && atype <= END and there was a compiler warning for CONFIG_BPF_LSM=n case.
Quoted 95 lines
kernel/bpf/cgroup.c static void cgroup_bpf_release(struct work_struct *work) · line 258
Quoted 8 lines
kernel/bpf/cgroup.c +6
-1+if (pl->prog->expected_attach_type ==BPF_LSM_CGROUP ) +bpf_trampoline_unlink_cgroup_shim (pl->prog); +#endif bpf_prog_put (pl->prog); -if (pl->link) + } +if (pl->link) { +#ifdef CONFIG_BPF_LSM Same here.
Quoted 85 lines
kernel/bpf/cgroup.c +30
-6+if (pl->link->link.prog->expected_attach_type ==BPF_LSM_CGROUP ) +bpf_trampoline_unlink_cgroup_shim (pl->link->link.prog); +#endif bpf_cgroup_link_auto_detach (pl->link); + }kfree (pl);static_branch_dec (&cgroup_bpf_enabled_key[atype]); }@@ -479,6 +573,7 @@ static int __cgroup_bpf_attach(struct cgroup *cgrp,struct bpf_prog *old_prog =NULL ;struct bpf_cgroup_storage *storage[MAX_BPF_CGROUP_STORAGE_TYPE ] = {};struct bpf_cgroup_storage *new_storage[MAX_BPF_CGROUP_STORAGE_TYPE ] = {}; +struct bpf_prog *new_prog = prog ? : link->link.prog;enum cgroup_bpf_attach_type atype;struct bpf_prog_list *pl;struct hlist_head *progs;@@ -495,7 +590,7 @@ static int __cgroup_bpf_attach(struct cgroup *cgrp,/* replace_prog implies BPF_F_REPLACE, and vice versa */ return -EINVAL ; - atype =to_cgroup_bpf_attach_type (type); + atype =bpf_cgroup_atype_find (type, new_prog->aux->attach_btf_id);if (atype <0 )return -EINVAL ;@@ -549,17 +644,30 @@ static int __cgroup_bpf_attach(struct cgroup *cgrp,bpf_cgroup_storages_assign (pl->storage, storage); cgrp->bpf.flags[atype] = saved_flags; +if (type ==BPF_LSM_CGROUP ) { + err =bpf_trampoline_link_cgroup_shim (new_prog, atype); +if (err) + goto cleanup; + } + err =update_effective_progs (cgrp, atype);if (err) - goto cleanup; + goto cleanup_trampoline; -if (old_prog) +if (old_prog) { +if (type ==BPF_LSM_CGROUP ) +bpf_trampoline_unlink_cgroup_shim (old_prog);bpf_prog_put (old_prog); -else + }else {static_branch_inc (&cgroup_bpf_enabled_key[atype]); + }bpf_cgroup_storages_link (new_storage, cgrp, type);return 0 ; +cleanup_trampoline: +if (type ==BPF_LSM_CGROUP ) +bpf_trampoline_unlink_cgroup_shim (new_prog); + cleanup:if (old_prog) { pl->prog = old_prog;@@ -651,7 +759,7 @@ static int __cgroup_bpf_replace(struct cgroup *cgrp,struct hlist_head *progs;bool found = false; - atype =to_cgroup_bpf_attach_type (link->type); + atype =bpf_cgroup_atype_find (link->type, new_prog->aux->attach_btf_id);if (atype <0 )return -EINVAL ;@@ -803,9 +911,15 @@ static int __cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog,struct bpf_prog *old_prog;struct bpf_prog_list *pl;struct hlist_head *progs; +u32 attach_btf_id =0 ;u32 flags; - atype =to_cgroup_bpf_attach_type (type); +if (prog) + attach_btf_id = prog->aux->attach_btf_id; +if (link) + attach_btf_id = link->link.prog->aux->attach_btf_id; + + atype =bpf_cgroup_atype_find (type, attach_btf_id);if (atype <0 )return -EINVAL ;
Quoted 11 lines
kernel/bpf/cgroup.c static int __cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog, · line 958
Quoted 8 lines
kernel/bpf/cgroup.c +3
-1@@ -839,8 +953,11 @@ static int __cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog,if (hlist_empty (progs))/* last program was detached, reset flags to zero */ cgrp->bpf.flags[atype] =0 ; -if (old_prog) +if (old_prog) { +if (type ==BPF_LSM_CGROUP ) +bpf_trampoline_unlink_cgroup_shim (old_prog);I think the same
bpf_trampoline_unlink_cgroup_shim()needs to be done inbpf_cgroup_link_release()? It should be done just after WARN_ON(__cgroup_bpf_detach()).
Oooh, I missed that, I thought that old_prog would have the pointer to the old program even if it's a link :-(
Do you mind if I handle it in __cgroup_bpf_detach as well? Or do you think it's cleaner to do in bpf_cgroup_link_release?
if (old_prog) {
...
} else if (link) {
if (type == BPF_LSM_CGROUP)
bpf_trampoline_unlink_cgroup_shim(link->link.prog); }
Quoted 16 lines
[ ... ]
Quoted 14 lines
kernel/bpf/syscall.c +2
-0@@ -3416,6 +3416,8 @@ attach_type_to_prog_type(enum bpf_attach_type attach_type)return BPF_PROG_TYPE_SK_LOOKUP ;case BPF_XDP :return BPF_PROG_TYPE_XDP ; +case BPF_LSM_CGROUP : +return BPF_PROG_TYPE_LSM ;default :return BPF_PROG_TYPE_UNSPEC ; }@@ -3469,6 +3471,11 @@ static int bpf_prog_attach(const union bpf_attr *attr)
Quoted 8 lines
kernel/bpf/syscall.c static int bpf_prog_attach(const union bpf_attr *attr) · line 3476
Quoted 6 lines
kernel/bpf/syscall.c +3
-0case BPF_PROG_TYPE_CGROUP_SOCKOPT :case BPF_PROG_TYPE_CGROUP_SYSCTL :case BPF_PROG_TYPE_SOCK_OPS : +case BPF_PROG_TYPE_LSM : +if (ptype ==BPF_PROG_TYPE_LSM && + prog->expected_attach_type !=BPF_LSM_CGROUP )Check this in
bpf_prog_attach_check_attach_type()where otherexpected_attach_typeare enforced.
It was there initially but I moved it here because bpf_prog_attach_check_attach_type() is called from link_create() as well where the range of acceptable expected_attach_type(s) is larger.
Quoted 7 lines
Quoted 7 lines
kernel/bpf/syscall.c +7
-0+void bpf_trampoline_unlink_cgroup_shim (struct bpf_prog *prog) +{ +struct bpf_shim_tramp_link *shim_link =NULL ; +struct bpf_trampoline *tr; +bpf_func_t bpf_func; +u64 key; +
Quoted 8 lines
kernel/bpf/syscall.c
Quoted 6 lines
kernel/bpf/syscall.c +6
-0+ key =bpf_trampoline_compute_key (NULL , prog->aux->attach_btf, + prog->aux->attach_btf_id); + +bpf_lsm_find_cgroup_shim (prog, &bpf_func); + tr =bpf_trampoline_lookup (key); +if (!tr)nit. !tr should not be possible? If not, may be a
WARN_ON_ONCE()or remove this check.
Let's have WARN_ON_ONCE, you never know..
Quoted 15 lines
Quoted 12 lines
kernel/bpf/syscall.c +12
-0+return ; + +mutex_lock (&tr->mutex); + shim_link =cgroup_shim_find (tr, bpf_func); +mutex_unlock (&tr->mutex); + +if (shim_link) +bpf_link_put (&shim_link->link.link); + + bpf_trampoline_put(tr); /* bpf_trampoline_lookup above */ +} +#endif [ ... ]
Quoted 15 lines
tools/include/linux/btf_ids.h extern struct btf_id_set name; · line 176
Quoted 11 lines
tools/include/linux/btf_ids.h +2
-1@@ -172,7 +172,9 @@ extern struct btf_id_set name; BTF_SOCK_TYPE(BTF_SOCK_TYPE_TCP_TW, tcp_timewait_sock) \ BTF_SOCK_TYPE(BTF_SOCK_TYPE_TCP6, tcp6_sock) \ BTF_SOCK_TYPE(BTF_SOCK_TYPE_UDP, udp_sock) \ -BTF_SOCK_TYPE (BTF_SOCK_TYPE_UDP6 , udp6_sock) + BTF_SOCK_TYPE(BTF_SOCK_TYPE_UDP6, udp6_sock) \ +BTF_SOCK_TYPE (BTF_SOCK_TYPE_UNIX , unix_sock) \The existing tools's
btf_ids.hlooks more outdated from
the kernel'sbtf_ids.h.unix_sockis missing which is added back here.mptcp_sockis missing also but not added. I assume the latter test needsunix_sockhere ?
I haven't added mptcp_sock because I was added recently.
I don't think we really need to do the changes to tools/btf_ids.h, but it still might be worth trying to keep them in sync?
Quoted 1 line
Others lgtm.
Thank you, again, for the review!
Re: [PATCH bpf-next v9 03/10] bpf: per-cgroup lsm flavor
Quoted 21 lines · Stanislav Fomichev
Quoted 20 lines · Martin KaFai Lau
Quoted 18 lines · Stanislav Fomichev
Allow attaching to lsm hooks in the cgroup context.
Attaching to per-cgroup LSM works exactly like attaching to other per-cgroup hooks. New
BPF_LSM_CGROUPis added to trigger new mode; the actual lsm hook we attach to is signaled via existingattach_btf_id.For the hooks that have 'struct socket' or 'struct sock' as its first argument, we use the cgroup associated with that socket. For the rest, we use 'current' cgroup (this is all on default hierarchy == v2 only). Note that for some hooks that work on 'struct sock' we still take the cgroup from 'current' because some of them work on the socket that hasn't been properly initialized yet.
Behind the scenes, we allocate a shim program that is attached to the trampoline and runs cgroup effective BPF programs array. This shim has some rudimentary ref counting and can be shared between several programs attaching to the same per-cgroup lsm hook.
Quoted 8 lines
Quoted 2 lines
nit. The 'per-cgroup' may be read as each cgroup has its own shim. It will be useful to rephrase it a little.
I'll put the following, LMK if still not clear.
This shim has some rudimentary ref counting and can be shared between several programs attaching to the same lsm hook from different cgroups.
SG.
Quoted 18 lines
Quoted 11 lines
kernel/bpf/cgroup.c static int __cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog, · line 958
Quoted 8 lines
kernel/bpf/cgroup.c +3
-1@@ -839,8 +953,11 @@ static int __cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog,if (hlist_empty (progs))/* last program was detached, reset flags to zero */ cgrp->bpf.flags[atype] =0 ; -if (old_prog) +if (old_prog) { +if (type ==BPF_LSM_CGROUP ) +bpf_trampoline_unlink_cgroup_shim (old_prog);I think the same
bpf_trampoline_unlink_cgroup_shim()needs to be done inbpf_cgroup_link_release()? It should be done just after WARN_ON(__cgroup_bpf_detach()).Oooh, I missed that, I thought that
old_progwould have the pointer to the old program even if it's a link :-(Do you mind if I handle it in
__cgroup_bpf_detachas well? Or do you think it's cleaner to do inbpf_cgroup_link_release?
Quoted 6 lines
if (
old_prog) {
...
} else if (link) {
if (type ==BPF_LSM_CGROUP)bpf_trampoline_unlink_cgroup_shim(link->link.prog); }
I think this will be similar to the earlier revision.
I was thinking doing it in bpf_cgroup_link_release() for link where I know the bpf_prog_put() will be handled by bpf_link_free() as other link's release/detach functions do. Otherwise, the first reading impression is why there is no bpf_prog_put() in __cgroup_bpf_detach() for the link case.
No strong opinion here. Either way is fine. Mostly personal impression when reading the code in the first pass. Reading it closely should be able to figure out in either way.
Quoted 26 lines
Quoted 17 lines
[ ... ]
Quoted 14 lines
kernel/bpf/syscall.c +2
-0@@ -3416,6 +3416,8 @@ attach_type_to_prog_type(enum bpf_attach_type attach_type)return BPF_PROG_TYPE_SK_LOOKUP ;case BPF_XDP :return BPF_PROG_TYPE_XDP ; +case BPF_LSM_CGROUP : +return BPF_PROG_TYPE_LSM ;default :return BPF_PROG_TYPE_UNSPEC ; }@@ -3469,6 +3471,11 @@ static int bpf_prog_attach(const union bpf_attr *attr)Quoted 8 lines
kernel/bpf/syscall.c static int bpf_prog_attach(const union bpf_attr *attr) · line 3476
Quoted 6 lines
kernel/bpf/syscall.c +3
-0case BPF_PROG_TYPE_CGROUP_SOCKOPT :case BPF_PROG_TYPE_CGROUP_SYSCTL :case BPF_PROG_TYPE_SOCK_OPS : +case BPF_PROG_TYPE_LSM : +if (ptype ==BPF_PROG_TYPE_LSM && + prog->expected_attach_type !=BPF_LSM_CGROUP )Check this in
bpf_prog_attach_check_attach_type()where otherexpected_attach_typeare enforced.
Quoted 3 lines
It was there initially but I moved it here because
bpf_prog_attach_check_attach_type()is called fromlink_create()as well where the range of acceptableexpected_attach_type(s)is larger.
Ah. ic. Thanks for the explanation.
Quoted 16 lines
Quoted 7 lines
Quoted 7 lines
tools/include/linux/btf_ids.h +0
-0@@ -172,7 +172,9 @@ extern struct btf_id_set name; BTF_SOCK_TYPE(BTF_SOCK_TYPE_TCP_TW, tcp_timewait_sock) \BTF_SOCK_TYPE (BTF_SOCK_TYPE_TCP6 , tcp6_sock) \Quoted 8 lines
tools/include/linux/btf_ids.h extern struct btf_id_set name; · line 176
Quoted 4 lines
tools/include/linux/btf_ids.h +2
-1BTF_SOCK_TYPE(BTF_SOCK_TYPE_UDP, udp_sock) \ -BTF_SOCK_TYPE (BTF_SOCK_TYPE_UDP6 , udp6_sock) + BTF_SOCK_TYPE(BTF_SOCK_TYPE_UDP6, udp6_sock) \ +BTF_SOCK_TYPE (BTF_SOCK_TYPE_UNIX , unix_sock) \The existing tools's
btf_ids.hlooks more outdated from
the kernel'sbtf_ids.h.unix_sockis missing which is added back here.mptcp_sockis missing also but not added. I assume the latter test needsunix_sockhere ?
Quoted 4 lines
I haven't added
mptcp_sockbecause I was added recently.I don't think we really need to do the changes to
tools/btf_ids.h, but it still might be worth trying to keep them in sync?
Yeah. Other than this list, it seems other parts of this file is out of sync also. May be just do an individual patch in this series to do a copy-and-paste update of the whole file.
PATCH v9 4/10 bpf: minimize number of allocated lsm slots per program
In reply to Stanislav FomichevPrevious patch adds 1:1 mapping between all 211 LSM hooks and bpf_cgroup program array. Instead of reserving a slot per possible hook, reserve 10 slots per cgroup for lsm programs. Those slots are dynamically allocated on demand and reclaimed.
struct cgroup_bpf {
struct bpf_prog_array * effective[33]; /* 0 264 */
/* --- cacheline 4 boundary (256 bytes) was 8 bytes ago --- */
struct hlist_head progs[33]; /* 264 264 */
/* --- cacheline 8 boundary (512 bytes) was 16 bytes ago --- */
u8 flags[33]; /* 528 33 */
/* XXX 7 bytes hole, try to pack */
struct list_head storages; /* 568 16 */
/* --- cacheline 9 boundary (576 bytes) was 8 bytes ago --- */
struct bpf_prog_array * inactive; /* 584 8 */
struct percpu_ref refcnt; /* 592 16 */
struct work_struct release_work; /* 608 72 */
/* size: 680, cachelines: 11, members: 7 */
/* sum members: 673, holes: 1, sum holes: 7 */
/* last cacheline: 40 bytes */
};Move 'ifdef CONFIG_CGROUP_BPF' to expose CGROUP_BPF_ATTACH_TYPE_INVALID to non-cgroup (core) parts.
--- include/linux/bpf-cgroup-defs.h | 3 +- include/linux/bpf.h | 4 ++- include/linux/bpf_lsm.h | 6 ---- kernel/bpf/bpf_lsm.c | 5 --- kernel/bpf/btf.c | 10 ------ kernel/bpf/cgroup.c | 54 ++++++++++++++++++++++++++++++++- kernel/bpf/core.c | 7 +++++ kernel/bpf/trampoline.c | 1 + 8 files changed, 66 insertions(+), 24 deletions(-)
include/linux/bpf-cgroup-defs.h +2 -1
@@ -11,7 +11,8 @@struct bpf_prog_array ;#ifdef CONFIG_BPF_LSM -#define CGROUP_LSM_NUM 211/* will be addressed in the next patch */ +/* Maximum number of concurrently attachable per-cgroup LSM hooks. */ +#define CGROUP_LSM_NUM 10#else #define CGROUP_LSM_NUM 0#endif
include/linux/bpf.h +3 -1
@@ -2407,7 +2407,6 @@ int bpf_arch_text_invalidate(void *dst, size_t len);struct btf_id_set ;bool btf_id_set_contains (const struct btf_id_set *set,u32 id); -int btf_id_set_index (const struct btf_id_set *set,u32 id);#define MAX_BPRINTF_VARARGS 12
@@ -2444,4 +2443,7 @@ void bpf_dynptr_init(struct bpf_dynptr_kern *ptr, void *data,void bpf_dynptr_set_null (struct bpf_dynptr_kern *ptr);int bpf_dynptr_check_size (u32 size); +void bpf_cgroup_atype_put (int cgroup_atype); +void bpf_cgroup_atype_get (u32 attach_btf_id,int cgroup_atype); +#endif /* _LINUX_BPF_H */
include/linux/bpf_lsm.h +0 -6
@@ -42,7 +42,6 @@ extern const struct bpf_func_proto bpf_inode_storage_get_proto;extern const struct bpf_func_proto bpf_inode_storage_delete_proto;void bpf_inode_storage_free (struct inode *inode); -int bpf_lsm_hook_idx (u32 btf_id);void bpf_lsm_find_cgroup_shim (const struct bpf_prog *prog,bpf_func_t *bpf_func);#else /* !CONFIG_BPF_LSM */
@@ -73,11 +72,6 @@ static inline void bpf_lsm_find_cgroup_shim(const struct bpf_prog *prog, { } -static inline int bpf_lsm_hook_idx (u32 btf_id) -{ -return -EINVAL ; -} -#endif /* CONFIG_BPF_LSM */ #endif /* _LINUX_BPF_LSM_H */
kernel/bpf/bpf_lsm.c +0 -5
@@ -69,11 +69,6 @@ void bpf_lsm_find_cgroup_shim(const struct bpf_prog *prog, *bpf_func = __cgroup_bpf_run_lsm_current; } -int bpf_lsm_hook_idx (u32 btf_id) -{ -return btf_id_set_index (&bpf_lsm_hooks, btf_id); -} -int bpf_lsm_verify_prog (struct bpf_verifier_log *vlog,const struct bpf_prog *prog) {
kernel/bpf/btf.c +0 -10
@@ -6842,16 +6842,6 @@ static int btf_id_cmp_func(const void *a, const void *b)return *pa - *pb; } -int btf_id_set_index (const struct btf_id_set *set,u32 id) -{ -const u32 *p; - - p =bsearch (&id, set->ids, set->cnt,sizeof (u32), btf_id_cmp_func); -if (!p) -return -1 ; -return p - set->ids; -} -bool btf_id_set_contains (const struct btf_id_set *set,u32 id) {return bsearch (&id, set->ids, set->cnt,sizeof (u32), btf_id_cmp_func) !=NULL ;
kernel/bpf/cgroup.c +53 -1
71 lines not on this page · raw message
kernel/bpf/core.c +7 -0
@@ -107,6 +107,9 @@ struct bpf_prog *bpf_prog_alloc_no_stats(unsigned int size, gfp_t gfp_extra_flag fp->aux->prog = fp; fp->jit_requested =ebpf_jit_enabled (); fp->blinding_requested =bpf_jit_blinding_enabled (fp); +#ifdef CONFIG_CGROUP_BPF + aux->cgroup_atype =CGROUP_BPF_ATTACH_TYPE_INVALID ; +#endif INIT_LIST_HEAD_RCU (&fp->aux->ksym.lnode);mutex_init (&fp->aux->used_maps_mutex);
@@ -2554,6 +2557,10 @@ static void bpf_prog_free_deferred(struct work_struct *work) aux = container_of(work, struct bpf_prog_aux, work);#ifdef CONFIG_BPF_SYSCALL bpf_free_kfunc_btf_tab (aux->kfunc_btf_tab); +#endif +#ifdef CONFIG_CGROUP_BPF +if (aux->cgroup_atype !=CGROUP_BPF_ATTACH_TYPE_INVALID ) +bpf_cgroup_atype_put (aux->cgroup_atype);#endif bpf_free_used_maps (aux);bpf_free_used_btfs (aux);
kernel/bpf/trampoline.c +1 -0
@@ -555,6 +555,7 @@ static struct bpf_shim_tramp_link *cgroup_shim_alloc(const struct bpf_prog *progbpf_prog_inc (p);bpf_link_init (&shim_link->link.link,BPF_LINK_TYPE_UNSPEC , &bpf_shim_tramp_link_lops, p); +bpf_cgroup_atype_get (p->aux->attach_btf_id, cgroup_atype);return shim_link; }
Signature · 1 line
2.36.1.476.g0c4daa206d-goog
kernel test robot
build botRe: [PATCH bpf-next v9 04/10] bpf: minimize number of allocated lsm slots per program
Thank you for the patch! Yet something to improve:
Hi Stanislav,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on bpf-next/master]
url: https://github.com/intel-lab-lkp/linux/commits/Stanislav-Fomichev/bpf-cgroup_sock-lsm-flavor/20220611-010241 base: https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git master config: i386-randconfig-a015 (https://download.01.org/0day-ci/archive/20220612/[email protected]/config) compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project ff4abe755279a3a47cc416ef80dbc900d9a98a19)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/ca53950e781503c3d62454a19b4d0395dbd79dd7
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Stanislav-Fomichev/bpf-cgroup_sock-lsm-flavor/20220611-010241 git checkout ca53950e781503c3d62454a19b4d0395dbd79dd7
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=i386 SHELL=/bin/bash
If you fix the issue, kindly add following tag where applicable
All errors (new ones prefixed by >>):
>> ld.lld: error: undefined symbol: bpf_cgroup_atype_get >>> referenced by trampoline.c:558 (kernel/bpf/trampoline.c:558) >>> bpf/trampoline.o:(bpf_trampoline_link_cgroup_shim) in archive kernel/built-in.a
Signature · 2 lines
0-DAY CI Kernel Test Service https://01.org/lkp
Re: [PATCH bpf-next v9 04/10] bpf: minimize number of allocated lsm slots per program
In reply to Stanislav FomichevQuoted 25 lines · Stanislav Fomichev
Previous patch adds 1:1 mapping between all 211 LSM hooks and
bpf_cgroupprogram array. Instead of reserving a slot per possible hook, reserve 10 slots per cgroup for lsm programs. Those slots are dynamically allocated on demand and reclaimed.struct cgroup_bpf { struct bpf_prog_array * effective[33]; /* 0 264 */ /* --- cacheline 4 boundary (256 bytes) was 8 bytes ago --- */ struct hlist_head progs[33]; /* 264 264 */ /* --- cacheline 8 boundary (512 bytes) was 16 bytes ago --- */ u8 flags[33]; /* 528 33 */ /* XXX 7 bytes hole, try to pack */ struct list_head storages; /* 568 16 */ /* --- cacheline 9 boundary (576 bytes) was 8 bytes ago --- */ struct bpf_prog_array * inactive; /* 584 8 */ struct percpu_ref refcnt; /* 592 16 */ struct work_struct release_work; /* 608 72 */ /* size: 680, cachelines: 11, members: 7 */ /* sum members: 673, holes: 1, sum holes: 7 */ /* last cacheline: 40 bytes */ };
Quoted 2 lines
Move 'ifdef
CONFIG_CGROUP_BPF' to exposeCGROUP_BPF_ATTACH_TYPE_INVALIDto non-cgroup (core) parts.
hmm... don't see this change in bpf-cgroup-defs.h in this patch.
Quoted 35 lines
include/linux/bpf-cgroup-defs.h +2
-1@@ -11,7 +11,8 @@struct bpf_prog_array ;#ifdef CONFIG_BPF_LSM -#define CGROUP_LSM_NUM 211/* will be addressed in the next patch */ +/* Maximum number of concurrently attachable per-cgroup LSM hooks. */ +#define CGROUP_LSM_NUM 10#else #define CGROUP_LSM_NUM 0#endif include/linux/bpf.h +3
-1@@ -2407,7 +2407,6 @@ int bpf_arch_text_invalidate(void *dst, size_t len);struct btf_id_set ;bool btf_id_set_contains (const struct btf_id_set *set,u32 id); -int btf_id_set_index (const struct btf_id_set *set,u32 id);#define MAX_BPRINTF_VARARGS 12@@ -2444,4 +2443,7 @@ void bpf_dynptr_init(struct bpf_dynptr_kern *ptr, void *data,void bpf_dynptr_set_null (struct bpf_dynptr_kern *ptr);int bpf_dynptr_check_size (u32 size); +void bpf_cgroup_atype_put (int cgroup_atype); +void bpf_cgroup_atype_get (u32 attach_btf_id,int cgroup_atype); +#endif /* _LINUX_BPF_H */
[ ... ]
Quoted 64 lines
kernel/bpf/cgroup.c +45
-1@@ -128,12 +128,56 @@ unsigned int __cgroup_bpf_run_lsm_current(const void *ctx, }#ifdef CONFIG_BPF_LSM +struct cgroup_lsm_atype { +u32 attach_btf_id; +int refcnt; +}; + +static struct cgroup_lsm_atype cgroup_lsm_atype[CGROUP_LSM_NUM ]; +static enum cgroup_bpf_attach_type bpf_cgroup_atype_find (enum bpf_attach_type attach_type,u32 attach_btf_id) { +int i; + +lockdep_assert_held (&cgroup_mutex); +if (attach_type !=BPF_LSM_CGROUP )return to_cgroup_bpf_attach_type (attach_type); -return CGROUP_LSM_START +bpf_lsm_hook_idx (attach_btf_id); + +for (i =0 ; i <ARRAY_SIZE (cgroup_lsm_atype); i++) +if (cgroup_lsm_atype[i].attach_btf_id == attach_btf_id) +return CGROUP_LSM_START + i; + +for (i =0 ; i <ARRAY_SIZE (cgroup_lsm_atype); i++) +if (cgroup_lsm_atype[i].attach_btf_id ==0 ) +return CGROUP_LSM_START + i; + +return -E2BIG ; + +} + +void bpf_cgroup_atype_get (u32 attach_btf_id,int cgroup_atype) +{ +int i = cgroup_atype -CGROUP_LSM_START ; + +lockdep_assert_held (&cgroup_mutex); + +WARN_ON_ONCE (cgroup_lsm_atype[i].attach_btf_id && + cgroup_lsm_atype[i].attach_btf_id != attach_btf_id); + + cgroup_lsm_atype[i].attach_btf_id = attach_btf_id; + cgroup_lsm_atype[i].refcnt++; +} + +void bpf_cgroup_atype_put (int cgroup_atype) +{ +int i = cgroup_atype -CGROUP_LSM_START ; + +mutex_lock (&cgroup_mutex); +if (--cgroup_lsm_atype[i].refcnt <=0 ) + cgroup_lsm_atype[i].attach_btf_id =0 ; +mutex_unlock (&cgroup_mutex); }#else static enum cgroup_bpf_attach_type@@ -143,6 +187,14 @@ bpf_cgroup_atype_find(enum bpf_attach_type attach_type, u32 attach_btf_id)return to_cgroup_bpf_attach_type (attach_type);
kernel/bpf/cgroup.c bpf_cgroup_atype_find(enum bpf_attach_type attach_type, u32 attach_btf_id) · line 197
Quoted 10 lines
kernel/bpf/cgroup.c +8
-0return -EOPNOTSUPP ; } + +void bpf_cgroup_atype_get (u32 attach_btf_id,int cgroup_atype) +{ +} + +void bpf_cgroup_atype_put (int cgroup_atype) +{ +}
From the test bot report, these two empty functions may need
to be inlined in a .h or else the caller needs to have a CONFIG_CGROUP_BPF before calling bpf_cgroup_atype_get(). The bpf-cgroup.h may be a better place than bpf.h for the inlines but not sure if it is easy to be included in trampoline.c or core.c. Whatever way makes more sense. Either .h is fine.
Others lgtm.
Quoted 43 lines
kernel/bpf/cgroup.c +0
-0#endif /* CONFIG_BPF_LSM */ void cgroup_bpf_offline (struct cgroup *cgrp)kernel/bpf/core.c +7
-0@@ -107,6 +107,9 @@ struct bpf_prog *bpf_prog_alloc_no_stats(unsigned int size, gfp_t gfp_extra_flag fp->aux->prog = fp; fp->jit_requested =ebpf_jit_enabled (); fp->blinding_requested =bpf_jit_blinding_enabled (fp); +#ifdef CONFIG_CGROUP_BPF + aux->cgroup_atype =CGROUP_BPF_ATTACH_TYPE_INVALID ; +#endif INIT_LIST_HEAD_RCU (&fp->aux->ksym.lnode);mutex_init (&fp->aux->used_maps_mutex);@@ -2554,6 +2557,10 @@ static void bpf_prog_free_deferred(struct work_struct *work) aux = container_of(work, struct bpf_prog_aux, work);#ifdef CONFIG_BPF_SYSCALL bpf_free_kfunc_btf_tab (aux->kfunc_btf_tab); +#endif +#ifdef CONFIG_CGROUP_BPF +if (aux->cgroup_atype !=CGROUP_BPF_ATTACH_TYPE_INVALID ) +bpf_cgroup_atype_put (aux->cgroup_atype);#endif bpf_free_used_maps (aux);bpf_free_used_btfs (aux);kernel/bpf/trampoline.c +1
-0@@ -555,6 +555,7 @@ static struct bpf_shim_tramp_link *cgroup_shim_alloc(const struct bpf_prog *progbpf_prog_inc (p);bpf_link_init (&shim_link->link.link,BPF_LINK_TYPE_UNSPEC , &bpf_shim_tramp_link_lops, p); +bpf_cgroup_atype_get (p->aux->attach_btf_id, cgroup_atype);return shim_link; }Signature · 1 line
2.36.1.476.g0c4daa206d-goog
Re: [PATCH bpf-next v9 04/10] bpf: minimize number of allocated lsm slots per program
Quoted 22 lines · Martin KaFai Lau
Quoted 20 lines · Stanislav Fomichev
Previous patch adds 1:1 mapping between all 211 LSM hooks and
bpf_cgroupprogram array. Instead of reserving a slot per possible hook, reserve 10 slots per cgroup for lsm programs. Those slots are dynamically allocated on demand and reclaimed.struct
cgroup_bpf{
structbpf_prog_array* effective[33]; /* 0 264 */
/* --- cacheline 4 boundary (256 bytes) was 8 bytes ago --- */
structhlist_headprogs[33]; /* 264 264 */
/* --- cacheline 8 boundary (512 bytes) was 16 bytes ago --- */
u8 flags[33]; /* 528 33 *//* XXX 7 bytes hole, try to pack */
struct
list_headstorages; /* 568 16 */
/* --- cacheline 9 boundary (576 bytes) was 8 bytes ago --- */
structbpf_prog_array* inactive; /* 584 8 */
structpercpu_refrefcnt; /* 592 16 */
structwork_structrelease_work; /* 608 72 */
Quoted 8 lines
Quoted 7 lines
/* size: 680, cachelines: 11, members: 7 */ /* sum members: 673, holes: 1, sum holes: 7 */ /* last cacheline: 40 bytes */ };Move 'ifdef
CONFIG_CGROUP_BPF' to exposeCGROUP_BPF_ATTACH_TYPE_INVALIDto non-cgroup (core) parts.hmm... don't see this change in
bpf-cgroup-defs.hin this patch.
Sorry for confusion, that's a leftover from my previous attempt to make it work for CONFIG_CGROUP_BPF=n case; will remove.
Quoted 109 lines
Quoted 35 lines
include/linux/bpf-cgroup-defs.h +2
-1@@ -11,7 +11,8 @@struct bpf_prog_array ;#ifdef CONFIG_BPF_LSM -#define CGROUP_LSM_NUM 211/* will be addressed in the next patch */ +/* Maximum number of concurrently attachable per-cgroup LSM hooks. */ +#define CGROUP_LSM_NUM 10#else #define CGROUP_LSM_NUM 0#endif include/linux/bpf.h +3
-1@@ -2407,7 +2407,6 @@ int bpf_arch_text_invalidate(void *dst, size_t len);struct btf_id_set ;bool btf_id_set_contains (const struct btf_id_set *set,u32 id); -int btf_id_set_index (const struct btf_id_set *set,u32 id);#define MAX_BPRINTF_VARARGS 12@@ -2444,4 +2443,7 @@ void bpf_dynptr_init(struct bpf_dynptr_kern *ptr, void *data,void bpf_dynptr_set_null (struct bpf_dynptr_kern *ptr);int bpf_dynptr_check_size (u32 size); +void bpf_cgroup_atype_put (int cgroup_atype); +void bpf_cgroup_atype_get (u32 attach_btf_id,int cgroup_atype); +#endif /* _LINUX_BPF_H */ [ ... ]
Quoted 71 lines
kernel/bpf/cgroup.c +50
-1@@ -128,12 +128,56 @@ unsigned int __cgroup_bpf_run_lsm_current(const void *ctx, }#ifdef CONFIG_BPF_LSM +struct cgroup_lsm_atype { +u32 attach_btf_id; +int refcnt; +}; + +static struct cgroup_lsm_atype cgroup_lsm_atype[CGROUP_LSM_NUM ]; +static enum cgroup_bpf_attach_type bpf_cgroup_atype_find (enum bpf_attach_type attach_type,u32 attach_btf_id) { +int i; + +lockdep_assert_held (&cgroup_mutex); +if (attach_type !=BPF_LSM_CGROUP )return to_cgroup_bpf_attach_type (attach_type); -return CGROUP_LSM_START +bpf_lsm_hook_idx (attach_btf_id); + +for (i =0 ; i <ARRAY_SIZE (cgroup_lsm_atype); i++) +if (cgroup_lsm_atype[i].attach_btf_id == attach_btf_id) +return CGROUP_LSM_START + i; + +for (i =0 ; i <ARRAY_SIZE (cgroup_lsm_atype); i++) +if (cgroup_lsm_atype[i].attach_btf_id ==0 ) +return CGROUP_LSM_START + i; + +return -E2BIG ; + +} + +void bpf_cgroup_atype_get (u32 attach_btf_id,int cgroup_atype) +{ +int i = cgroup_atype -CGROUP_LSM_START ; + +lockdep_assert_held (&cgroup_mutex); + +WARN_ON_ONCE (cgroup_lsm_atype[i].attach_btf_id && + cgroup_lsm_atype[i].attach_btf_id != attach_btf_id); + + cgroup_lsm_atype[i].attach_btf_id = attach_btf_id; + cgroup_lsm_atype[i].refcnt++; +} + +void bpf_cgroup_atype_put (int cgroup_atype) +{ +int i = cgroup_atype -CGROUP_LSM_START ; + +mutex_lock (&cgroup_mutex); +if (--cgroup_lsm_atype[i].refcnt <=0 ) + cgroup_lsm_atype[i].attach_btf_id =0 ; +mutex_unlock (&cgroup_mutex); }#else static enum cgroup_bpf_attach_type@@ -143,6 +187,14 @@ bpf_cgroup_atype_find(enum bpf_attach_type attach_type, u32 attach_btf_id)return to_cgroup_bpf_attach_type (attach_type);return -EOPNOTSUPP ; } + +void bpf_cgroup_atype_get (u32 attach_btf_id,int cgroup_atype) +{ +} +
Quoted 8 lines
kernel/bpf/cgroup.c bpf_cgroup_atype_find(enum bpf_attach_type attach_type, u32 attach_btf_id) · line 197
Quoted 3 lines
kernel/bpf/cgroup.c +3
-0+void bpf_cgroup_atype_put (int cgroup_atype) +{ +}From the test bot report, these two empty functions may need
to be inlined in a .h or else the caller needs to have aCONFIG_CGROUP_BPFbefore callingbpf_cgroup_atype_get(). Thebpf-cgroup.hmay be a better place thanbpf.hfor the inlines but not sure if it is easy to be included intrampoline.corcore.c. Whatever way makes more sense. Either .h is fine.
Yeah, I already moved them into headers after the complaints from the bot. Thanks for double checking!
Let's keep in bpf.h ?
kernel/bpf/core.c:2563:17: error: implicit declaration of function ‘bpf_cgroup_atype_put’ [-Werror=implicit-function-declaration]
2563 | bpf_cgroup_atype_put(aux->cgroup_atype);
Quoted 45 lines
Others lgtm.
Quoted 43 lines
kernel/bpf/cgroup.c +0
-0#endif /* CONFIG_BPF_LSM */ void cgroup_bpf_offline (struct cgroup *cgrp)kernel/bpf/core.c +7
-0@@ -107,6 +107,9 @@ struct bpf_prog *bpf_prog_alloc_no_stats(unsigned int size, gfp_t gfp_extra_flag fp->aux->prog = fp; fp->jit_requested =ebpf_jit_enabled (); fp->blinding_requested =bpf_jit_blinding_enabled (fp); +#ifdef CONFIG_CGROUP_BPF + aux->cgroup_atype =CGROUP_BPF_ATTACH_TYPE_INVALID ; +#endif INIT_LIST_HEAD_RCU (&fp->aux->ksym.lnode);mutex_init (&fp->aux->used_maps_mutex);@@ -2554,6 +2557,10 @@ static void bpf_prog_free_deferred(struct work_struct *work) aux = container_of(work, struct bpf_prog_aux, work);#ifdef CONFIG_BPF_SYSCALL bpf_free_kfunc_btf_tab (aux->kfunc_btf_tab); +#endif +#ifdef CONFIG_CGROUP_BPF +if (aux->cgroup_atype !=CGROUP_BPF_ATTACH_TYPE_INVALID ) +bpf_cgroup_atype_put (aux->cgroup_atype);#endif bpf_free_used_maps (aux);bpf_free_used_btfs (aux);kernel/bpf/trampoline.c +1
-1@@ -555,6 +555,7 @@ static struct bpf_shim_tramp_link *cgroup_shim_alloc(const struct bpf_prog *progbpf_prog_inc (p);bpf_link_init (&shim_link->link.link,BPF_LINK_TYPE_UNSPEC , &bpf_shim_tramp_link_lops, p); +bpf_cgroup_atype_get (p->aux->attach_btf_id, cgroup_atype);return shim_link; } --2.36.1.476.g0c4daa206d-goog
Re: [PATCH bpf-next v9 04/10] bpf: minimize number of allocated lsm slots per program
Quoted 13 lines · Stanislav Fomichev
Quoted 4 lines
Quoted 4 lines
kernel/bpf/cgroup.c +4
-0+void bpf_cgroup_atype_get (u32 attach_btf_id,int cgroup_atype) +{ +} +Quoted 8 lines
kernel/bpf/cgroup.c bpf_cgroup_atype_find(enum bpf_attach_type attach_type, u32 attach_btf_id) · line 197
Quoted 3 lines
kernel/bpf/cgroup.c +3
-0+void bpf_cgroup_atype_put (int cgroup_atype) +{ +}From the test bot report, these two empty functions may need
to be inlined in a .h or else the caller needs to have aCONFIG_CGROUP_BPFbefore callingbpf_cgroup_atype_get(). Thebpf-cgroup.hmay be a better place thanbpf.hfor the inlines but not sure if it is easy to be included intrampoline.corcore.c. Whatever way makes more sense. Either .h is fine.
Quoted 4 lines
Yeah, I already moved them into headers after the complaints from the bot. Thanks for double checking!
Let's keep in
bpf.h?
ok.
PATCH v9 5/10 bpf: implement BPF_PROG_QUERY for BPF_LSM_CGROUP
In reply to Stanislav FomichevWe have two options:
1. Treat all BPF_LSM_CGROUP the same, regardless of attach_btf_id
2. Treat BPF_LSM_CGROUP+attach_btf_id as a separate hook point
I was doing (2) in the original patch, but switching to (1) here:
* bpf_prog_query returns all attached BPF_LSM_CGROUP programs regardless of attach_btf_id
* attach_btf_id is exported via bpf_prog_info
--- include/uapi/linux/bpf.h | 3 ++ kernel/bpf/cgroup.c | 91 +++++++++++++++++++++++++++------------- kernel/bpf/syscall.c | 8 +++- 3 files changed, 73 insertions(+), 29 deletions(-)
include/uapi/linux/bpf.h +3 -0
@@ -1432,6 +1432,7 @@ union bpf_attr {__u32 attach_flags;__aligned_u64 prog_ids;__u32 prog_cnt; +__aligned_u64 prog_attach_flags;/* output: per-program attach_flags */ } query;struct {/* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */
@@ -5996,6 +5997,8 @@ struct bpf_prog_info {__u64 run_cnt;__u64 recursion_misses;__u32 verified_insns; +__u32 attach_btf_obj_id; +__u32 attach_btf_id; } __attribute__((aligned(8)));struct bpf_map_info {
kernel/bpf/cgroup.c +63 -28
120 lines not on this page · raw message
kernel/bpf/syscall.c +7 -1
@@ -3520,7 +3520,7 @@ static int bpf_prog_detach(const union bpf_attr *attr) } } -#define BPF_PROG_QUERY_LAST_FIELD query.prog_cnt +#define BPF_PROG_QUERY_LAST_FIELD query.prog_attach_flagsstatic int bpf_prog_query (const union bpf_attr *attr,union bpf_attr __user *uattr)
@@ -3556,6 +3556,7 @@ static int bpf_prog_query(const union bpf_attr *attr,case BPF_CGROUP_SYSCTL :case BPF_CGROUP_GETSOCKOPT :case BPF_CGROUP_SETSOCKOPT : +case BPF_LSM_CGROUP :return cgroup_bpf_prog_query (attr, uattr);case BPF_LIRC_MODE2 :return lirc_prog_query (attr, uattr);
@@ -4066,6 +4067,11 @@ static int bpf_prog_get_info_by_fd(struct file *file,if (prog->aux->btf) info.btf_id =btf_obj_id (prog->aux->btf); + info.attach_btf_id = prog->aux->attach_btf_id; +if (prog->aux->attach_btf) + info.attach_btf_obj_id =btf_obj_id (prog->aux->attach_btf); +else if (prog->aux->dst_prog) + info.attach_btf_obj_id =btf_obj_id (prog->aux->dst_prog->aux->attach_btf); ulen = info.nr_func_info; info.nr_func_info = prog->aux->func_info_cnt;
Signature · 1 line
2.36.1.476.g0c4daa206d-goog
Re: [PATCH bpf-next v9 05/10] bpf: implement BPF_PROG_QUERY for BPF_LSM_CGROUP
Quoted 34 lines · Stanislav Fomichev
kernel/bpf/cgroup.c +11
-5@@ -1029,57 +1029,92 @@ static int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog,static int __cgroup_bpf_query (struct cgroup *cgrp,const union bpf_attr *attr,union bpf_attr __user *uattr) { +__u32 __user *prog_attach_flags =u64_to_user_ptr (attr->query.prog_attach_flags);__u32 __user *prog_ids =u64_to_user_ptr (attr->query.prog_ids);enum bpf_attach_type type = attr->query.attach_type; +enum cgroup_bpf_attach_type from_atype, to_atype;enum cgroup_bpf_attach_type atype;struct bpf_prog_array *effective;struct hlist_head *progs;struct bpf_prog *prog;int cnt, ret =0 , i; +int total_cnt =0 ;u32 flags; - atype =to_cgroup_bpf_attach_type (type); -if (atype <0 ) -return -EINVAL ; +if (type ==BPF_LSM_CGROUP ) { +if (attr->query.prog_cnt && prog_ids && !prog_attach_flags) +return -EINVAL ; - progs = &cgrp->bpf.progs[atype]; - flags = cgrp->bpf.flags[atype]; + from_atype =CGROUP_LSM_START ; + to_atype =CGROUP_LSM_END ; + flags =0 ; + }else { + from_atype =to_cgroup_bpf_attach_type (type);
kernel/bpf/cgroup.c static int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog, · line 1060
Quoted 10 lines
kernel/bpf/cgroup.c +7
-2+if (from_atype <0 ) +return -EINVAL ; + to_atype = from_atype; + flags = cgrp->bpf.flags[from_atype]; + } - effective =rcu_dereference_protected (cgrp->bpf.effective[atype], -lockdep_is_held (&cgroup_mutex)); +for (atype = from_atype; atype <= to_atype; atype++) { + progs = &cgrp->bpf.progs[atype];
nit. Move the 'progs = ...' into the 'else {}' case below.
Quoted 28 lines
kernel/bpf/cgroup.c +13
-8-if (attr->query.query_flags &BPF_F_QUERY_EFFECTIVE ) - cnt =bpf_prog_array_length (effective); -else - cnt =prog_list_length (progs); +if (attr->query.query_flags &BPF_F_QUERY_EFFECTIVE ) { + effective =rcu_dereference_protected (cgrp->bpf.effective[atype], +lockdep_is_held (&cgroup_mutex)); + total_cnt +=bpf_prog_array_length (effective); + }else { + total_cnt +=prog_list_length (progs); + } + }if (copy_to_user (&uattr->query.attach_flags, &flags,sizeof (flags)))return -EFAULT ; -if (copy_to_user (&uattr->query.prog_cnt, &cnt,sizeof (cnt))) +if (copy_to_user (&uattr->query.prog_cnt, &total_cnt,sizeof (total_cnt)))return -EFAULT ; -if (attr->query.prog_cnt ==0 || !prog_ids || !cnt) +if (attr->query.prog_cnt ==0 || !prog_ids || !total_cnt)/* return early if user requested only program count + flags */ return 0 ; -if (attr->query.prog_cnt < cnt) { - cnt = attr->query.prog_cnt; + +if (attr->query.prog_cnt < total_cnt) { + total_cnt = attr->query.prog_cnt;
kernel/bpf/cgroup.c static int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog, · line 1085
Quoted 10 lines
kernel/bpf/cgroup.c +2
-5ret = -ENOSPC ; } -if (attr->query.query_flags &BPF_F_QUERY_EFFECTIVE ) { -return bpf_prog_array_copy_to_user (effective, prog_ids, cnt); - }else { -struct bpf_prog_list *pl; -u32 id; +for (atype = from_atype; atype <= to_atype && total_cnt; atype++) { + progs = &cgrp->bpf.progs[atype];
same here.
kernel/bpf/cgroup.c static int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog, · line 1086
Quoted 1 line
kernel/bpf/cgroup.c +1
-0+ flags = cgrp->bpf.flags[atype];
and the 'flags = ...' can be moved to 'if (prog_attach_flags) {}'
Others lgtm.
Quoted 42 lines
kernel/bpf/cgroup.c +29
-8- i =0 ; -hlist_for_each_entry (pl, progs, node) { - prog =prog_list_prog (pl); - id = prog->aux->id; -if (copy_to_user (prog_ids + i, &id,sizeof (id))) -return -EFAULT ; -if (++i == cnt) -break ; +if (attr->query.query_flags &BPF_F_QUERY_EFFECTIVE ) { + effective =rcu_dereference_protected (cgrp->bpf.effective[atype], +lockdep_is_held (&cgroup_mutex)); + cnt =min_t (int,bpf_prog_array_length (effective), total_cnt); + ret =bpf_prog_array_copy_to_user (effective, prog_ids, cnt); + }else { +struct bpf_prog_list *pl; +u32 id; + + cnt =min_t (int,prog_list_length (progs), total_cnt); + i =0 ; +hlist_for_each_entry (pl, progs, node) { + prog =prog_list_prog (pl); + id = prog->aux->id; +if (copy_to_user (prog_ids + i, &id,sizeof (id))) +return -EFAULT ; +if (++i == cnt) +break ; + } } + +if (prog_attach_flags) { +for (i =0 ; i < cnt; i++) +if (copy_to_user (prog_attach_flags + i, &flags,sizeof (flags))) +return -EFAULT ; + prog_attach_flags += cnt; + } + + prog_ids += cnt; + total_cnt -= cnt; }return ret; }
Re: [PATCH bpf-next v9 05/10] bpf: implement BPF_PROG_QUERY for BPF_LSM_CGROUP
Quoted 86 lines · Martin KaFai Lau
Quoted 34 lines · Stanislav Fomichev
kernel/bpf/cgroup.c +11
-5@@ -1029,57 +1029,92 @@ static int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog,static int __cgroup_bpf_query (struct cgroup *cgrp,const union bpf_attr *attr,union bpf_attr __user *uattr) { +__u32 __user *prog_attach_flags =u64_to_user_ptr (attr->query.prog_attach_flags);__u32 __user *prog_ids =u64_to_user_ptr (attr->query.prog_ids);enum bpf_attach_type type = attr->query.attach_type; +enum cgroup_bpf_attach_type from_atype, to_atype;enum cgroup_bpf_attach_type atype;struct bpf_prog_array *effective;struct hlist_head *progs;struct bpf_prog *prog;int cnt, ret =0 , i; +int total_cnt =0 ;u32 flags; - atype =to_cgroup_bpf_attach_type (type); -if (atype <0 ) -return -EINVAL ; +if (type ==BPF_LSM_CGROUP ) { +if (attr->query.prog_cnt && prog_ids && !prog_attach_flags) +return -EINVAL ; - progs = &cgrp->bpf.progs[atype]; - flags = cgrp->bpf.flags[atype]; + from_atype =CGROUP_LSM_START ; + to_atype =CGROUP_LSM_END ; + flags =0 ; + }else { + from_atype =to_cgroup_bpf_attach_type (type);kernel/bpf/cgroup.c static int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog, · line 1060
Quoted 10 lines
kernel/bpf/cgroup.c +7
-2+if (from_atype <0 ) +return -EINVAL ; + to_atype = from_atype; + flags = cgrp->bpf.flags[from_atype]; + } - effective =rcu_dereference_protected (cgrp->bpf.effective[atype], -lockdep_is_held (&cgroup_mutex)); +for (atype = from_atype; atype <= to_atype; atype++) { + progs = &cgrp->bpf.progs[atype];nit. Move the 'progs = ...' into the 'else {}' case below.
Quoted 28 lines
kernel/bpf/cgroup.c +13
-8-if (attr->query.query_flags &BPF_F_QUERY_EFFECTIVE ) - cnt =bpf_prog_array_length (effective); -else - cnt =prog_list_length (progs); +if (attr->query.query_flags &BPF_F_QUERY_EFFECTIVE ) { + effective =rcu_dereference_protected (cgrp->bpf.effective[atype], +lockdep_is_held (&cgroup_mutex)); + total_cnt +=bpf_prog_array_length (effective); + }else { + total_cnt +=prog_list_length (progs); + } + }if (copy_to_user (&uattr->query.attach_flags, &flags,sizeof (flags)))return -EFAULT ; -if (copy_to_user (&uattr->query.prog_cnt, &cnt,sizeof (cnt))) +if (copy_to_user (&uattr->query.prog_cnt, &total_cnt,sizeof (total_cnt)))return -EFAULT ; -if (attr->query.prog_cnt ==0 || !prog_ids || !cnt) +if (attr->query.prog_cnt ==0 || !prog_ids || !total_cnt)/* return early if user requested only program count + flags */ return 0 ; -if (attr->query.prog_cnt < cnt) { - cnt = attr->query.prog_cnt; + +if (attr->query.prog_cnt < total_cnt) { + total_cnt = attr->query.prog_cnt;kernel/bpf/cgroup.c static int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog, · line 1085
Quoted 10 lines
kernel/bpf/cgroup.c +2
-5ret = -ENOSPC ; } -if (attr->query.query_flags &BPF_F_QUERY_EFFECTIVE ) { -return bpf_prog_array_copy_to_user (effective, prog_ids, cnt); - }else { -struct bpf_prog_list *pl; -u32 id; +for (atype = from_atype; atype <= to_atype && total_cnt; atype++) { + progs = &cgrp->bpf.progs[atype];
Quoted 8 lines
same here.
kernel/bpf/cgroup.c static int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog, · line 1086
Quoted 1 line
kernel/bpf/cgroup.c +1
-0+ flags = cgrp->bpf.flags[atype];and the 'flags = ...' can be moved to 'if (
prog_attach_flags) {}'Others lgtm.
Reviewed-by Martin KaFai Lau <[email protected]>
Everything makes sense, will do, thanks!
Maybe we should also move "struct hlist_head *progs;" closer to the places where we use them? Same for "struct bpf_prog *prog;" which seems to be used only in one place.
Re: [PATCH bpf-next v9 05/10] bpf: implement BPF_PROG_QUERY for BPF_LSM_CGROUP
Quoted 94 lines · Stanislav Fomichev
Quoted 93 lines · Martin KaFai Lau
Quoted 34 lines · Stanislav Fomichev
kernel/bpf/cgroup.c +11
-5@@ -1029,57 +1029,92 @@ static int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog,static int __cgroup_bpf_query (struct cgroup *cgrp,const union bpf_attr *attr,union bpf_attr __user *uattr) { +__u32 __user *prog_attach_flags =u64_to_user_ptr (attr->query.prog_attach_flags);__u32 __user *prog_ids =u64_to_user_ptr (attr->query.prog_ids);enum bpf_attach_type type = attr->query.attach_type; +enum cgroup_bpf_attach_type from_atype, to_atype;enum cgroup_bpf_attach_type atype;struct bpf_prog_array *effective;struct hlist_head *progs;struct bpf_prog *prog;int cnt, ret =0 , i; +int total_cnt =0 ;u32 flags; - atype =to_cgroup_bpf_attach_type (type); -if (atype <0 ) -return -EINVAL ; +if (type ==BPF_LSM_CGROUP ) { +if (attr->query.prog_cnt && prog_ids && !prog_attach_flags) +return -EINVAL ; - progs = &cgrp->bpf.progs[atype]; - flags = cgrp->bpf.flags[atype]; + from_atype =CGROUP_LSM_START ; + to_atype =CGROUP_LSM_END ; + flags =0 ; + }else { + from_atype =to_cgroup_bpf_attach_type (type);kernel/bpf/cgroup.c static int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog, · line 1060
Quoted 10 lines
kernel/bpf/cgroup.c +7
-2+if (from_atype <0 ) +return -EINVAL ; + to_atype = from_atype; + flags = cgrp->bpf.flags[from_atype]; + } - effective =rcu_dereference_protected (cgrp->bpf.effective[atype], -lockdep_is_held (&cgroup_mutex)); +for (atype = from_atype; atype <= to_atype; atype++) { + progs = &cgrp->bpf.progs[atype];nit. Move the 'progs = ...' into the 'else {}' case below.
Quoted 28 lines
kernel/bpf/cgroup.c +13
-8-if (attr->query.query_flags &BPF_F_QUERY_EFFECTIVE ) - cnt =bpf_prog_array_length (effective); -else - cnt =prog_list_length (progs); +if (attr->query.query_flags &BPF_F_QUERY_EFFECTIVE ) { + effective =rcu_dereference_protected (cgrp->bpf.effective[atype], +lockdep_is_held (&cgroup_mutex)); + total_cnt +=bpf_prog_array_length (effective); + }else { + total_cnt +=prog_list_length (progs); + } + }if (copy_to_user (&uattr->query.attach_flags, &flags,sizeof (flags)))return -EFAULT ; -if (copy_to_user (&uattr->query.prog_cnt, &cnt,sizeof (cnt))) +if (copy_to_user (&uattr->query.prog_cnt, &total_cnt,sizeof (total_cnt)))return -EFAULT ; -if (attr->query.prog_cnt ==0 || !prog_ids || !cnt) +if (attr->query.prog_cnt ==0 || !prog_ids || !total_cnt)/* return early if user requested only program count + flags */ return 0 ; -if (attr->query.prog_cnt < cnt) { - cnt = attr->query.prog_cnt; + +if (attr->query.prog_cnt < total_cnt) { + total_cnt = attr->query.prog_cnt;kernel/bpf/cgroup.c static int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog, · line 1085
Quoted 10 lines
kernel/bpf/cgroup.c +2
-5ret = -ENOSPC ; } -if (attr->query.query_flags &BPF_F_QUERY_EFFECTIVE ) { -return bpf_prog_array_copy_to_user (effective, prog_ids, cnt); - }else { -struct bpf_prog_list *pl; -u32 id; +for (atype = from_atype; atype <= to_atype && total_cnt; atype++) { + progs = &cgrp->bpf.progs[atype];same here.
kernel/bpf/cgroup.c static int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog, · line 1086
Quoted 1 line
kernel/bpf/cgroup.c +1
-0+ flags = cgrp->bpf.flags[atype];and the 'flags = ...' can be moved to 'if (
prog_attach_flags) {}'Others lgtm.
Quoted 7 lines
Quoted 1 line
Reviewed-by Martin KaFai Lau <[email protected]>Everything makes sense, will do, thanks!
Maybe we should also move "struct
hlist_head*progs;" closer to the places where we use them? Same for "structbpf_prog*prog;" which seems to be used only in one place.
Yep. SG. Thanks!
PATCH v9 6/10 bpf: expose bpf_{g,s}etsockopt to lsm cgroup
In reply to Stanislav FomichevI don't see how to make it nice without introducing btf id lists for the hooks where these helpers are allowed. Some LSM hooks work on the locked sockets, some are triggering early and don't grab any locks, so have two lists for now:
1. LSM hooks which trigger under socket lock - minority of the hooks, but ideal case for us, we can expose existing BTF-based helpers
2. LSM hooks which trigger without socket lock, but they trigger early in the socket creation path where it should be safe to do setsockopt without any locks
3. The rest are prohibited. I'm thinking that this use-case might be a good gateway to sleeping lsm cgroup hooks in the future. We can either expose lock/unlock operations (and add tracking to the verifier) or have another set of bpf_setsockopt wrapper that grab the locks and might sleep.
--- include/linux/bpf.h | 2 ++ kernel/bpf/bpf_lsm.c | 40 +++++++++++++++++++++++++++++ net/core/filter.c | 60 ++++++++++++++++++++++++++++++++++++++------ 3 files changed, 95 insertions(+), 7 deletions(-)
include/linux/bpf.h +2 -0
@@ -2282,6 +2282,8 @@ extern const struct bpf_func_proto bpf_for_each_map_elem_proto;extern const struct bpf_func_proto bpf_btf_find_by_name_kind_proto;extern const struct bpf_func_proto bpf_sk_setsockopt_proto;extern const struct bpf_func_proto bpf_sk_getsockopt_proto; +extern const struct bpf_func_proto bpf_unlocked_sk_setsockopt_proto; +extern const struct bpf_func_proto bpf_unlocked_sk_getsockopt_proto;extern const struct bpf_func_proto bpf_kallsyms_lookup_name_proto;extern const struct bpf_func_proto bpf_find_vma_proto;extern const struct bpf_func_proto bpf_loop_proto;
kernel/bpf/bpf_lsm.c +40 -0
@@ -45,6 +45,26 @@ BTF_ID(func, bpf_lsm_sk_alloc_security) BTF_ID(func, bpf_lsm_sk_free_security)BTF_SET_END (bpf_lsm_current_hooks) +/* List of LSM hooks that trigger while the socket is properly locked. +*/ +BTF_SET_START (bpf_lsm_locked_sockopt_hooks ) +BTF_ID (func, bpf_lsm_socket_sock_rcv_skb) +BTF_ID (func, bpf_lsm_sk_clone_security) +BTF_ID (func, bpf_lsm_sock_graft) +BTF_ID (func, bpf_lsm_inet_csk_clone) +BTF_ID (func, bpf_lsm_inet_conn_established) +BTF_ID (func, bpf_lsm_sctp_bind_connect) +BTF_SET_END (bpf_lsm_locked_sockopt_hooks) + +/* List of LSM hooks that trigger while the socket is _not_ locked, +* but it's ok to call bpf_{g,s}etsockopt because the socket is still +* in the early init phase. +*/ +BTF_SET_START (bpf_lsm_unlocked_sockopt_hooks) +BTF_ID (func, bpf_lsm_socket_post_create) +BTF_ID (func, bpf_lsm_socket_socketpair) +BTF_SET_END (bpf_lsm_unlocked_sockopt_hooks) + void bpf_lsm_find_cgroup_shim(const struct bpf_prog *prog, bpf_func_t *bpf_func) {
@@ -201,6 +221,26 @@ bpf_lsm_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)case BPF_FUNC_get_retval:return prog->expected_attach_type ==BPF_LSM_CGROUP ? &bpf_get_retval_proto :NULL ; +case BPF_FUNC_setsockopt: +if (prog->expected_attach_type !=BPF_LSM_CGROUP ) +return NULL ; +if (btf_id_set_contains (&bpf_lsm_locked_sockopt_hooks, + prog->aux->attach_btf_id)) +return &bpf_sk_setsockopt_proto; +if (btf_id_set_contains (&bpf_lsm_unlocked_sockopt_hooks, + prog->aux->attach_btf_id)) +return &bpf_unlocked_sk_setsockopt_proto; +return NULL ; +case BPF_FUNC_getsockopt: +if (prog->expected_attach_type !=BPF_LSM_CGROUP ) +return NULL ; +if (btf_id_set_contains (&bpf_lsm_locked_sockopt_hooks, + prog->aux->attach_btf_id)) +return &bpf_sk_getsockopt_proto; +if (btf_id_set_contains (&bpf_lsm_unlocked_sockopt_hooks, + prog->aux->attach_btf_id)) +return &bpf_unlocked_sk_getsockopt_proto; +return NULL ;default :return tracing_prog_func_proto (func_id, prog); }
net/core/filter.c +53 -7
95 lines not on this page · raw message
Signature · 1 line
2.36.1.476.g0c4daa206d-goog
Re: [PATCH bpf-next v9 06/10] bpf: expose bpf_{g,s}etsockopt to lsm cgroup
Quoted 5 lines · Stanislav Fomichev
I don't see how to make it nice without introducing btf id lists for the hooks where these helpers are allowed. Some LSM hooks work on the locked sockets, some are triggering early and don't grab any locks, so have two lists for now:
Quoted 10 lines
1. LSM hooks which trigger under socket lock - minority of the hooks, but ideal case for us, we can expose existing BTF-based helpers
2. LSM hooks which trigger without socket lock, but they trigger early in the socket creation path where it should be safe to do setsockopt without any locks
3. The rest are prohibited. I'm thinking that this use-case might be a good gateway to sleeping lsm cgroup hooks in the future. We can either expose lock/unlock operations (and add tracking to the verifier) or have another set ofbpf_setsockoptwrapper that grab the locks and might sleep.
Another possibility is to acquire/release the sk lock in __bpf_prog_{enter,exit}_lsm_cgroup(). However, it will unnecessarily acquire it even the prog is not doing any get/setsockopt. It probably can make some checking to avoid the lock...etc. :/
sleepable bpf-prog is a cleaner way out. From a quick look, cgroup_storage is not safe for sleepable bpf-prog. All other BPF_MAP_TYPE_{SK,INODE,TASK}_STORAGE is already safe once their common infra in bpf_local_storage.c was made sleepable-safe.
Quoted 26 lines
Signed-off-by Stanislav Fomichev <[email protected]>--- include/linux/bpf.h | 2 ++ kernel/bpf/bpf_lsm.c | 40 +++++++++++++++++++++++++++++ net/core/filter.c | 60 ++++++++++++++++++++++++++++++++++++++------ 3 files changed, 95 insertions(+), 7 deletions(-)include/linux/bpf.h +2
-0@@ -2282,6 +2282,8 @@ extern const struct bpf_func_proto bpf_for_each_map_elem_proto;extern const struct bpf_func_proto bpf_btf_find_by_name_kind_proto;extern const struct bpf_func_proto bpf_sk_setsockopt_proto;extern const struct bpf_func_proto bpf_sk_getsockopt_proto; +extern const struct bpf_func_proto bpf_unlocked_sk_setsockopt_proto; +extern const struct bpf_func_proto bpf_unlocked_sk_getsockopt_proto;extern const struct bpf_func_proto bpf_kallsyms_lookup_name_proto;extern const struct bpf_func_proto bpf_find_vma_proto;extern const struct bpf_func_proto bpf_loop_proto;kernel/bpf/bpf_lsm.c +0
-0
kernel/bpf/bpf_lsm.c BTF_ID(func, bpf_lsm_sk_alloc_security) · line 52
Quoted 8 lines
kernel/bpf/bpf_lsm.c +5
-0@@ -45,6 +45,26 @@ BTF_ID(func, bpf_lsm_sk_alloc_security) BTF_ID(func, bpf_lsm_sk_free_security) BTF_SET_END(bpf_lsm_current_hooks) +/* List of LSM hooks that trigger while the socket is properly locked. + */ +BTF_SET_START(bpf_lsm_locked_sockopt_hooks) +BTF_ID(func, bpf_lsm_socket_sock_rcv_skb) +BTF_ID(func, bpf_lsm_sk_clone_security)
From looking how security_sk_clone() is used at sock_copy(), it has two sk args, one is listen sk and one is the clone. I think both of them are not locked.
The bpf_lsm_inet_csk_clone below should be enough to do setsockopt in the new clone?
kernel/bpf/bpf_lsm.c BTF_ID(func, bpf_lsm_sk_alloc_security) · line 56
Quoted 4 lines
kernel/bpf/bpf_lsm.c +4
-0+BTF_ID(func, bpf_lsm_sock_graft) +BTF_ID(func, bpf_lsm_inet_csk_clone) +BTF_ID(func, bpf_lsm_inet_conn_established) +BTF_ID (func, bpf_lsm_sctp_bind_connect)
I didn't look at this one, so I can't comment.
Do you have a use case?
Quoted 11 lines
kernel/bpf/bpf_lsm.c +11
-0+BTF_SET_END(bpf_lsm_locked_sockopt_hooks) + +/* List of LSM hooks that trigger while the socket is _not_ locked, + * but it's ok to call bpf_{g,s}etsockopt because the socket is still + * in the early init phase. + */ +BTF_SET_START(bpf_lsm_unlocked_sockopt_hooks) +BTF_ID(func, bpf_lsm_socket_post_create) +BTF_ID(func, bpf_lsm_socket_socketpair) +BTF_SET_END(bpf_lsm_unlocked_sockopt_hooks) +
Re: [PATCH bpf-next v9 06/10] bpf: expose bpf_{g,s}etsockopt to lsm cgroup
Quoted 17 lines · Martin KaFai Lau
Quoted 5 lines · Stanislav Fomichev
I don't see how to make it nice without introducing btf id lists for the hooks where these helpers are allowed. Some LSM hooks work on the locked sockets, some are triggering early and don't grab any locks, so have two lists for now:
Quoted 10 lines
1. LSM hooks which trigger under socket lock - minority of the hooks, but ideal case for us, we can expose existing BTF-based helpers
2. LSM hooks which trigger without socket lock, but they trigger early in the socket creation path where it should be safe to do setsockopt without any locks
3. The rest are prohibited. I'm thinking that this use-case might be a good gateway to sleeping lsm cgroup hooks in the future. We can either expose lock/unlock operations (and add tracking to the verifier) or have another set ofbpf_setsockoptwrapper that grab the locks and might sleep.
Quoted 7 lines
Another possibility is to acquire/release the sk lock in __bpf_prog_{enter,exit}_lsm_cgroup(). However, it will unnecessarily acquire it even the prog is not doing any get/setsockopt. It probably can make some checking to avoid the lock...etc. :/
sleepable bpf-prog is a cleaner way out. From a quick look,
cgroup_storageis not safe for sleepable bpf-prog.
Is it because it's using non-trace-flavor of rcu?
Quoted 3 lines
All other BPF_MAP_TYPE_{SK,INODE,TASK}_STORAGE is already safe once their common infra in
bpf_local_storage.cwas made sleepable-safe.
That might be another argument in favor of replacing the internal implementation for cgroup_storage with the generic framework we use for sk/inode/task.
Quoted 37 lines
Quoted 25 lines
Signed-off-by Stanislav Fomichev <[email protected]>--- include/linux/bpf.h | 2 ++ kernel/bpf/bpf_lsm.c | 40 +++++++++++++++++++++++++++++ net/core/filter.c | 60 ++++++++++++++++++++++++++++++++++++++------ 3 files changed, 95 insertions(+), 7 deletions(-)include/linux/bpf.h +2
-0@@ -2282,6 +2282,8 @@ extern const struct bpf_func_proto bpf_for_each_map_elem_proto;extern const struct bpf_func_proto bpf_btf_find_by_name_kind_proto;extern const struct bpf_func_proto bpf_sk_setsockopt_proto;extern const struct bpf_func_proto bpf_sk_getsockopt_proto; +extern const struct bpf_func_proto bpf_unlocked_sk_setsockopt_proto; +extern const struct bpf_func_proto bpf_unlocked_sk_getsockopt_proto;extern const struct bpf_func_proto bpf_kallsyms_lookup_name_proto;extern const struct bpf_func_proto bpf_find_vma_proto;extern const struct bpf_func_proto bpf_loop_proto;kernel/bpf/bpf_lsm.c +0
-0kernel/bpf/bpf_lsm.c BTF_ID(func, bpf_lsm_sk_alloc_security) · line 52
Quoted 8 lines
kernel/bpf/bpf_lsm.c +5
-0@@ -45,6 +45,26 @@ BTF_ID(func, bpf_lsm_sk_alloc_security) BTF_ID(func, bpf_lsm_sk_free_security) BTF_SET_END(bpf_lsm_current_hooks) +/* List of LSM hooks that trigger while the socket is properly locked. + */ +BTF_SET_START(bpf_lsm_locked_sockopt_hooks) +BTF_ID(func, bpf_lsm_socket_sock_rcv_skb) +BTF_ID(func, bpf_lsm_sk_clone_security)From looking how
security_sk_clone()is used atsock_copy(), it has two sk args, one is listen sk and one is the clone. I think both of them are not locked.
Quoted 2 lines
The
bpf_lsm_inet_csk_clonebelow should be enough to do setsockopt in the new clone?
Hm, good point, let me drop this one.
I wonder if long term, instead of those lists, we can annotate the arguments with __locked or __unlocked (the way we do with __user pointers)? That might be more scalable and we can let sleepable bpf deal with __unlocked cases. Just thinking out loud...
Quoted 6 lines
kernel/bpf/bpf_lsm.c BTF_ID(func, bpf_lsm_sk_alloc_security) · line 56
Quoted 4 lines
kernel/bpf/bpf_lsm.c +4
-0+BTF_ID(func, bpf_lsm_sock_graft) +BTF_ID(func, bpf_lsm_inet_csk_clone) +BTF_ID(func, bpf_lsm_inet_conn_established) +BTF_ID (func, bpf_lsm_sctp_bind_connect)I didn't look at this one, so I can't comment.
Do you have a use case?
No, let's drop as well. I didn't want those lists to contain only the cases I want, otherwise it doesn't feel generic. But sctp seems dead anyway.
Quoted 11 lines
Quoted 11 lines
kernel/bpf/bpf_lsm.c +11
-0+BTF_SET_END(bpf_lsm_locked_sockopt_hooks) + +/* List of LSM hooks that trigger while the socket is _not_ locked, + * but it's ok to call bpf_{g,s}etsockopt because the socket is still + * in the early init phase. + */ +BTF_SET_START(bpf_lsm_unlocked_sockopt_hooks) +BTF_ID(func, bpf_lsm_socket_post_create) +BTF_ID(func, bpf_lsm_socket_socketpair) +BTF_SET_END(bpf_lsm_unlocked_sockopt_hooks) +
Re: [PATCH bpf-next v9 06/10] bpf: expose bpf_{g,s}etsockopt to lsm cgroup
Quoted 23 lines · Stanislav Fomichev
Quoted 22 lines · Martin KaFai Lau
Quoted 5 lines · Stanislav Fomichev
I don't see how to make it nice without introducing btf id lists for the hooks where these helpers are allowed. Some LSM hooks work on the locked sockets, some are triggering early and don't grab any locks, so have two lists for now:
Quoted 10 lines
1. LSM hooks which trigger under socket lock - minority of the hooks, but ideal case for us, we can expose existing BTF-based helpers
2. LSM hooks which trigger without socket lock, but they trigger early in the socket creation path where it should be safe to do setsockopt without any locks
3. The rest are prohibited. I'm thinking that this use-case might be a good gateway to sleeping lsm cgroup hooks in the future. We can either expose lock/unlock operations (and add tracking to the verifier) or have another set ofbpf_setsockoptwrapper that grab the locks and might sleep.Another possibility is to acquire/release the sk lock in __bpf_prog_{enter,exit}_lsm_cgroup(). However, it will unnecessarily acquire it even the prog is not doing any get/setsockopt. It probably can make some checking to avoid the lock...etc. :/
Quoted 4 lines
Quoted 2 lines
sleepable bpf-prog is a cleaner way out. From a quick look,
cgroup_storageis not safe for sleepable bpf-prog.Is it because it's using non-trace-flavor of rcu?
Right, and commit 0fe4b381a59e ("bpf: Allow bpf_local_storage to be used by sleepable programs") is to make it work for both flavors.
Quoted 8 lines
Quoted 4 lines
All other BPF_MAP_TYPE_{SK,INODE,TASK}_STORAGE is already safe once their common infra in
bpf_local_storage.cwas made sleepable-safe.That might be another argument in favor of replacing the internal implementation for
cgroup_storagewith the generic framework we use for sk/inode/task.
It could be a new map type to support sk/inode/task style of local storage.
I am seeing use cases that the bpf prog is not a cgroup-bpf prog and it has a hold of the cgroup pointer. It ends up creating a bpf hashmap with the cg_id as the key. For example,
https://lore.kernel.org/bpf/[email protected]/
It will be useful to support this use case for cgroup as sk/inode/task storage does. A quick thought is it needs another map_type because of different helper interface, e.g. the bpf prog can create and delete a sk/inode/task storage.
Quoted 41 lines
Quoted 38 lines
Quoted 26 lines
Signed-off-by Stanislav Fomichev <[email protected]>--- include/linux/bpf.h | 2 ++ kernel/bpf/bpf_lsm.c | 40 +++++++++++++++++++++++++++++ net/core/filter.c | 60 ++++++++++++++++++++++++++++++++++++++------ 3 files changed, 95 insertions(+), 7 deletions(-)include/linux/bpf.h +2
-0@@ -2282,6 +2282,8 @@ extern const struct bpf_func_proto bpf_for_each_map_elem_proto;extern const struct bpf_func_proto bpf_btf_find_by_name_kind_proto;extern const struct bpf_func_proto bpf_sk_setsockopt_proto;extern const struct bpf_func_proto bpf_sk_getsockopt_proto; +extern const struct bpf_func_proto bpf_unlocked_sk_setsockopt_proto; +extern const struct bpf_func_proto bpf_unlocked_sk_getsockopt_proto;extern const struct bpf_func_proto bpf_kallsyms_lookup_name_proto;extern const struct bpf_func_proto bpf_find_vma_proto;extern const struct bpf_func_proto bpf_loop_proto;kernel/bpf/bpf_lsm.c +0
-0kernel/bpf/bpf_lsm.c BTF_ID(func, bpf_lsm_sk_alloc_security) · line 52
Quoted 8 lines
kernel/bpf/bpf_lsm.c +5
-0@@ -45,6 +45,26 @@ BTF_ID(func, bpf_lsm_sk_alloc_security) BTF_ID(func, bpf_lsm_sk_free_security) BTF_SET_END(bpf_lsm_current_hooks) +/* List of LSM hooks that trigger while the socket is properly locked. + */ +BTF_SET_START(bpf_lsm_locked_sockopt_hooks) +BTF_ID(func, bpf_lsm_socket_sock_rcv_skb) +BTF_ID(func, bpf_lsm_sk_clone_security)From looking how
security_sk_clone()is used atsock_copy(), it has two sk args, one is listen sk and one is the clone. I think both of them are not locked.Quoted 2 lines
The
bpf_lsm_inet_csk_clonebelow should be enough to do setsockopt in the new clone?
Quoted 6 lines
Hm, good point, let me drop this one.
I wonder if long term, instead of those lists, we can annotate the arguments with
__lockedor__unlocked(the way we do with__userpointers)? That might be more scalable and we can let sleepable bpf deal with__unlockedcases. Just thinking out loud...
I think the btf_tag may help here. Cc: Yonghong.
Re: [PATCH bpf-next v9 06/10] bpf: expose bpf_{g,s}etsockopt to lsm cgroup
Quoted 42 lines · Martin KaFai Lau
Quoted 23 lines · Stanislav Fomichev
Quoted 22 lines · Martin KaFai Lau
Quoted 5 lines · Stanislav Fomichev
I don't see how to make it nice without introducing btf id lists for the hooks where these helpers are allowed. Some LSM hooks work on the locked sockets, some are triggering early and don't grab any locks, so have two lists for now:
Quoted 10 lines
1. LSM hooks which trigger under socket lock - minority of the hooks, but ideal case for us, we can expose existing BTF-based helpers
2. LSM hooks which trigger without socket lock, but they trigger early in the socket creation path where it should be safe to do setsockopt without any locks
3. The rest are prohibited. I'm thinking that this use-case might be a good gateway to sleeping lsm cgroup hooks in the future. We can either expose lock/unlock operations (and add tracking to the verifier) or have another set ofbpf_setsockoptwrapper that grab the locks and might sleep.Another possibility is to acquire/release the sk lock in __bpf_prog_{enter,exit}_lsm_cgroup(). However, it will unnecessarily acquire it even the prog is not doing any get/setsockopt. It probably can make some checking to avoid the lock...etc. :/
Quoted 4 lines
Quoted 2 lines
sleepable bpf-prog is a cleaner way out. From a quick look,
cgroup_storageis not safe for sleepable bpf-prog.Is it because it's using non-trace-flavor of rcu?
Right, and commit
0fe4b381a59e("bpf: Allowbpf_local_storageto be used by sleepable programs") is to make it work for both flavors.Quoted 8 lines
Quoted 4 lines
All other BPF_MAP_TYPE_{SK,INODE,TASK}_STORAGE is already safe once their common infra in
bpf_local_storage.cwas made sleepable-safe.That might be another argument in favor of replacing the internal implementation for
cgroup_storagewith the generic framework we use for sk/inode/task.It could be a new map type to support sk/inode/task style of local storage.
Quoted 8 lines
I am seeing use cases that the bpf prog is not a cgroup-bpf prog and it has a hold of the cgroup pointer. It ends up creating a bpf hashmap with the
cg_idas the key. For example,
https://lore.kernel.org/bpf/[email protected]/
It will be useful to support this use case for cgroup as sk/inode/task storage does. A quick thought is it needs anothermap_typebecause of different helper interface, e.g. the bpf prog can create and delete a sk/inode/task storage.
Good point. We've also discussed that new map type internally with Yosry. And for me the biggest issue with a new map was some major differentiating factor from the existing one. Making it work with non-cgroup progs might be it. Another, as you mention, is the ability to remove the value. Having special treatment for bpf_get_local_storage (in terms of always assuming non-null return value) might be problematic for the internal conversion to the common storage framework :-(
Quoted 40 lines
Quoted 40 lines
Quoted 39 lines
Quoted 25 lines
Signed-off-by Stanislav Fomichev <[email protected]>--- include/linux/bpf.h | 2 ++ kernel/bpf/bpf_lsm.c | 40 +++++++++++++++++++++++++++++ net/core/filter.c | 60 ++++++++++++++++++++++++++++++++++++++------ 3 files changed, 95 insertions(+), 7 deletions(-)include/linux/bpf.h +2
-0@@ -2282,6 +2282,8 @@ extern const struct bpf_func_proto bpf_for_each_map_elem_proto;extern const struct bpf_func_proto bpf_btf_find_by_name_kind_proto;extern const struct bpf_func_proto bpf_sk_setsockopt_proto;extern const struct bpf_func_proto bpf_sk_getsockopt_proto; +extern const struct bpf_func_proto bpf_unlocked_sk_setsockopt_proto; +extern const struct bpf_func_proto bpf_unlocked_sk_getsockopt_proto;extern const struct bpf_func_proto bpf_kallsyms_lookup_name_proto;extern const struct bpf_func_proto bpf_find_vma_proto;extern const struct bpf_func_proto bpf_loop_proto;kernel/bpf/bpf_lsm.c +0
-0kernel/bpf/bpf_lsm.c BTF_ID(func, bpf_lsm_sk_alloc_security) · line 52
Quoted 8 lines
kernel/bpf/bpf_lsm.c +5
-0@@ -45,6 +45,26 @@ BTF_ID(func, bpf_lsm_sk_alloc_security) BTF_ID(func, bpf_lsm_sk_free_security) BTF_SET_END(bpf_lsm_current_hooks) +/* List of LSM hooks that trigger while the socket is properly locked. + */ +BTF_SET_START(bpf_lsm_locked_sockopt_hooks) +BTF_ID(func, bpf_lsm_socket_sock_rcv_skb) +BTF_ID(func, bpf_lsm_sk_clone_security)From looking how
security_sk_clone()is used atsock_copy(), it has two sk args, one is listen sk and one is the clone. I think both of them are not locked.The
bpf_lsm_inet_csk_clonebelow should be enough to do setsockopt in the new clone?
Quoted 7 lines
Quoted 6 lines
Hm, good point, let me drop this one.
I wonder if long term, instead of those lists, we can annotate the arguments with
__lockedor__unlocked(the way we do with__userpointers)? That might be more scalable and we can let sleepable bpf deal with__unlockedcases. Just thinking out loud...I think the
btf_tagmay help here. Cc: Yonghong.
Exactly. I haven't looked closely, but that seems like the right thing to leverage. Thx!
PATCH v9 7/10 libbpf: add lsm_cgoup_sock type
In reply to Stanislav Fomichevlsm_cgroup/ is the prefix for BPF_LSM_CGROUP.
--- tools/lib/bpf/libbpf.c | 3 +++ 1 file changed, 3 insertions(+)
tools/lib/bpf/libbpf.c +3 -0
@@ -107,6 +107,7 @@ static const char * const attach_type_name[] = { [BPF_TRACE_FEXIT] = "trace_fexit", [BPF_MODIFY_RETURN] = "modify_return", [BPF_LSM_MAC] = "lsm_mac", + [BPF_LSM_CGROUP] = "lsm_cgroup", [BPF_SK_LOOKUP] = "sk_lookup", [BPF_TRACE_ITER] = "trace_iter", [BPF_XDP_DEVMAP] = "xdp_devmap",
@@ -9201,6 +9202,7 @@ static const struct bpf_sec_def section_defs[] = {SEC_DEF ("freplace+" ,EXT ,0 ,SEC_ATTACH_BTF , attach_trace),SEC_DEF ("lsm+" ,LSM ,BPF_LSM_MAC ,SEC_ATTACH_BTF , attach_lsm),SEC_DEF ("lsm.s+" ,LSM ,BPF_LSM_MAC ,SEC_ATTACH_BTF |SEC_SLEEPABLE , attach_lsm), +SEC_DEF ("lsm_cgroup+" ,LSM ,BPF_LSM_CGROUP ,SEC_ATTACH_BTF ),SEC_DEF ("iter+" ,TRACING ,BPF_TRACE_ITER ,SEC_ATTACH_BTF , attach_iter),SEC_DEF ("iter.s+" ,TRACING ,BPF_TRACE_ITER ,SEC_ATTACH_BTF |SEC_SLEEPABLE , attach_iter), SEC_DEF("syscall", SYSCALL, 0, SEC_SLEEPABLE),
@@ -9654,6 +9656,7 @@ void btf_get_kernel_prefix_kind(enum bpf_attach_type attach_type, *kind =BTF_KIND_TYPEDEF ;break ;case BPF_LSM_MAC : +case BPF_LSM_CGROUP : *prefix =BTF_LSM_PREFIX ; *kind =BTF_KIND_FUNC ;break ;
Signature · 1 line
2.36.1.476.g0c4daa206d-goog
PATCH v9 8/10 libbpf: implement bpf_prog_query_opts
In reply to Stanislav FomichevImplement bpf_prog_query_opts as a more expendable version of bpf_prog_query. Expose new prog_attach_flags and attach_btf_func_id as well:
* prog_attach_flags is a per-program attach_type; relevant only for lsm cgroup program which might have different attach_flags per attach_btf_id
* attach_btf_func_id is a new field expose for prog_query which specifies real btf function id for lsm cgroup attachments
--- tools/include/uapi/linux/bpf.h | 3 +++ tools/lib/bpf/bpf.c | 38 +++++++++++++++++++++++++++------- tools/lib/bpf/bpf.h | 15 ++++++++++++++ tools/lib/bpf/libbpf.map | 1 + 4 files changed, 50 insertions(+), 7 deletions(-)
tools/include/uapi/linux/bpf.h +3 -0
@@ -1432,6 +1432,7 @@ union bpf_attr {__u32 attach_flags;__aligned_u64 prog_ids;__u32 prog_cnt; +__aligned_u64 prog_attach_flags;/* output: per-program attach_flags */ } query;struct {/* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */
@@ -5996,6 +5997,8 @@ struct bpf_prog_info {__u64 run_cnt;__u64 recursion_misses;__u32 verified_insns; +__u32 attach_btf_obj_id; +__u32 attach_btf_id; } __attribute__((aligned(8)));struct bpf_map_info {
tools/lib/bpf/bpf.c +31 -7
@@ -888,24 +888,48 @@ int bpf_iter_create(int link_fd)return libbpf_err_errno (fd); } -int bpf_prog_query (int target_fd,enum bpf_attach_type type,__u32 query_flags, -__u32 *attach_flags,__u32 *prog_ids,__u32 *prog_cnt) +int bpf_prog_query_opts (int target_fd, +enum bpf_attach_type type, +struct bpf_prog_query_opts *opts) {union bpf_attr attr;int ret; +if (!OPTS_VALID (opts, bpf_prog_query_opts)) +return libbpf_err (-EINVAL ); +memset (&attr,0 ,sizeof (attr)); + attr.query.target_fd = target_fd; attr.query.attach_type = type; - attr.query.query_flags = query_flags; - attr.query.prog_cnt = *prog_cnt; - attr.query.prog_ids =ptr_to_u64 (prog_ids); + attr.query.query_flags =OPTS_GET (opts, query_flags,0 ); + attr.query.prog_cnt =OPTS_GET (opts, prog_cnt,0 ); + attr.query.prog_ids =ptr_to_u64 (OPTS_GET (opts, prog_ids,NULL )); + attr.query.prog_attach_flags =ptr_to_u64 (OPTS_GET (opts, prog_attach_flags,NULL )); ret =sys_bpf (BPF_PROG_QUERY , &attr,sizeof (attr)); +OPTS_SET (opts, attach_flags, attr.query.attach_flags); +OPTS_SET (opts, prog_cnt, attr.query.prog_cnt); + +return libbpf_err_errno (ret); +} + +int bpf_prog_query (int target_fd,enum bpf_attach_type type,__u32 query_flags, +__u32 *attach_flags,__u32 *prog_ids,__u32 *prog_cnt) +{ +LIBBPF_OPTS (bpf_prog_query_opts, opts); +int ret; + + opts.query_flags = query_flags; + opts.prog_ids = prog_ids; + opts.prog_cnt = *prog_cnt; + + ret =bpf_prog_query_opts (target_fd, type, &opts); +if (attach_flags) - *attach_flags = attr.query.attach_flags; - *prog_cnt = attr.query.prog_cnt; + *attach_flags = opts.attach_flags; + *prog_cnt = opts.prog_cnt;return libbpf_err_errno (ret); }
tools/lib/bpf/bpf.h +15 -0
@@ -442,9 +442,24 @@ LIBBPF_API int bpf_map_get_fd_by_id(__u32 id); LIBBPF_API int bpf_btf_get_fd_by_id(__u32 id); LIBBPF_API int bpf_link_get_fd_by_id(__u32 id); LIBBPF_API int bpf_obj_get_info_by_fd(int bpf_fd, void *info, __u32 *info_len); + +struct bpf_prog_query_opts { +size_t sz;/* size of this struct for forward/backward compatibility */ +__u32 query_flags; +__u32 attach_flags;/* output argument */ +__u32 *prog_ids; +__u32 prog_cnt;/* input+output argument */ +__u32 *prog_attach_flags; +}; +#define bpf_prog_query_opts__last_field prog_attach_flags + +LIBBPF_API int bpf_prog_query_opts(int target_fd, +enum bpf_attach_type type, +struct bpf_prog_query_opts *opts); LIBBPF_API int bpf_prog_query(int target_fd, enum bpf_attach_type type,__u32 query_flags,__u32 *attach_flags,__u32 *prog_ids,__u32 *prog_cnt); + LIBBPF_API int bpf_raw_tracepoint_open(const char *name, int prog_fd); LIBBPF_API int bpf_task_fd_query(int pid, int fd, __u32 flags, char *buf, __u32 *buf_len, __u32 *prog_id, __u32 *fd_type,
tools/lib/bpf/libbpf.map +1 -0
@@ -462,6 +462,7 @@ LIBBPF_0.8.0 { LIBBPF_1.0.0 { global: + bpf_prog_query_opts; btf__add_enum64; btf__add_enum64_value; libbpf_bpf_attach_type_str;
Signature · 1 line
2.36.1.476.g0c4daa206d-goog
PATCH v9 9/10 bpftool: implement cgroup tree for BPF_LSM_CGROUP
In reply to Stanislav Fomichev$ bpftool --nomount prog loadall $KDIR/tools/testing/selftests/bpf/lsm_cgroup.o /sys/fs/bpf/x $ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_alloc $ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_bind $ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_clone $ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_post_create $ bpftool cgroup tree CgroupPath ID AttachType AttachFlags Name /sys/fs/cgroup 6 lsm_cgroup socket_post_create bpf_lsm_socket_post_create 8 lsm_cgroup socket_bind bpf_lsm_socket_bind 10 lsm_cgroup socket_alloc bpf_lsm_sk_alloc_security 11 lsm_cgroup socket_clone bpf_lsm_inet_csk_clone
$ bpftool cgroup detach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_post_create $ bpftool cgroup tree CgroupPath ID AttachType AttachFlags Name /sys/fs/cgroup 8 lsm_cgroup socket_bind bpf_lsm_socket_bind 10 lsm_cgroup socket_alloc bpf_lsm_sk_alloc_security 11 lsm_cgroup socket_clone bpf_lsm_inet_csk_clone
--- tools/bpf/bpftool/cgroup.c | 80 +++++++++++++++++++++++++++----------- 1 file changed, 58 insertions(+), 22 deletions(-)
tools/bpf/bpftool/cgroup.c +58 -22
@@ -15,6 +15,7 @@#include <unistd.h> #include <bpf/bpf.h> +#include <bpf/btf.h> #include "main.h"
@@ -36,6 +37,7 @@" cgroup_inet_sock_release }" static unsigned int query_flags; +static struct btf *btf_vmlinux;static enum bpf_attach_type parse_attach_type (const char *str) {
@@ -69,6 +71,7 @@ static int show_bpf_prog(int id, enum bpf_attach_type attach_type, int level) {char prog_name[MAX_PROG_FULL_NAME ]; +const char *attach_btf_name =NULL ;struct bpf_prog_info info = {};const char *attach_type_str;__u32 info_len =sizeof (info);
@@ -84,6 +87,19 @@ static int show_bpf_prog(int id, enum bpf_attach_type attach_type, } attach_type_str =libbpf_bpf_attach_type_str (attach_type); + +if (btf_vmlinux && + info.attach_btf_id <btf__type_cnt (btf_vmlinux)) { +/* Note, we ignore info.attach_btf_obj_id for now. There +* is no good way to resolve btf_id to vmlinux +* or module btf. +*/ +const struct btf_type *t =btf__type_by_id (btf_vmlinux, + info.attach_btf_id); + attach_btf_name =btf__name_by_offset (btf_vmlinux, + t->name_off); + } +get_prog_full_name (&info, prog_fd, prog_name,sizeof (prog_name));if (json_output) {jsonw_start_object (json_wtr);
@@ -95,6 +111,10 @@ static int show_bpf_prog(int id, enum bpf_attach_type attach_type,jsonw_string_field (json_wtr,"attach_flags" , attach_flags_str);jsonw_string_field (json_wtr,"name" , prog_name); +if (attach_btf_name) +jsonw_string_field (json_wtr,"attach_btf_name" , attach_btf_name); +jsonw_uint_field (json_wtr,"attach_btf_obj_id" , info.attach_btf_obj_id); +jsonw_uint_field (json_wtr,"attach_btf_id" , info.attach_btf_id);jsonw_end_object (json_wtr); }else {printf ("%s%-8u " , level ?" " :"" , info.id);
@@ -102,7 +122,13 @@ static int show_bpf_prog(int id, enum bpf_attach_type attach_type,printf ("%-15s" , attach_type_str); else printf("type %-10u", attach_type); -printf (" %-15s %-15s\n" , attach_flags_str, prog_name); +printf (" %-15s %-15s" , attach_flags_str, prog_name); +if (attach_btf_name) +printf (" %-15s" , attach_btf_name); +else if (info.attach_btf_id) +printf (" attach_btf_obj_id=%d attach_btf_id=%d" , + info.attach_btf_obj_id, info.attach_btf_id); +printf ("\n" ); }close (prog_fd);
@@ -144,40 +170,49 @@ static int cgroup_has_attached_progs(int cgroup_fd)static int show_attached_bpf_progs (int cgroup_fd,enum bpf_attach_type type,int level) { +LIBBPF_OPTS (bpf_prog_query_opts, p); +__u32 prog_attach_flags[1024 ] = {0 };const char *attach_flags_str;__u32 prog_ids[1024 ] = {0 }; -__u32 prog_cnt, iter; -__u32 attach_flags;char buf[32 ]; +__u32 iter;int ret; - prog_cnt =ARRAY_SIZE (prog_ids); - ret =bpf_prog_query (cgroup_fd, type, query_flags, &attach_flags, - prog_ids, &prog_cnt); + p.query_flags = query_flags; + p.prog_cnt =ARRAY_SIZE (prog_ids); + p.prog_ids = prog_ids; + p.prog_attach_flags = prog_attach_flags; + + ret =bpf_prog_query_opts (cgroup_fd, type, &p);if (ret)return ret; -if (prog_cnt ==0 ) +if (p.prog_cnt ==0 )return 0 ; -switch (attach_flags) { -case BPF_F_ALLOW_MULTI : - attach_flags_str ="multi" ; -break ; -case BPF_F_ALLOW_OVERRIDE : - attach_flags_str ="override" ; -break ; -case 0 : - attach_flags_str ="" ; -break ; -default : -snprintf (buf,sizeof (buf),"unknown(%x)" , attach_flags); - attach_flags_str = buf; - } +for (iter =0 ; iter < p.prog_cnt; iter++) { +__u32 attach_flags; + + attach_flags = prog_attach_flags[iter] ?: p.attach_flags; + +switch (attach_flags) { +case BPF_F_ALLOW_MULTI : + attach_flags_str ="multi" ; +break ; +case BPF_F_ALLOW_OVERRIDE : + attach_flags_str ="override" ; +break ; +case 0 : + attach_flags_str ="" ; +break ; +default : +snprintf (buf,sizeof (buf),"unknown(%x)" , attach_flags); + attach_flags_str = buf; + } -for (iter =0 ; iter < prog_cnt; iter++)show_bpf_prog (prog_ids[iter], type, attach_flags_str, level); + }return 0 ; }
@@ -542,5 +577,6 @@ static const struct cmd cmds[] = {int do_cgroup (int argc,char **argv) { + btf_vmlinux =libbpf_find_kernel_btf ();return cmd_select (cmds, argc, argv, do_help); }
Signature · 1 line
2.36.1.476.g0c4daa206d-goog
Re: [PATCH bpf-next v9 09/10] bpftool: implement cgroup tree for BPF_LSM_CGROUP
2022-06-10 09:58 UTC-0700 ~ Stanislav Fomichev <[email protected]>
Quoted 23 lines
$ bpftool --nomount prog loadall $KDIR/tools/testing/selftests/bpf/lsm_cgroup.o /sys/fs/bpf/x $ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_alloc $ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_bind $ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_clone $ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_post_create $ bpftool cgroup tree CgroupPath ID AttachType AttachFlags Name /sys/fs/cgroup 6 lsm_cgroup socket_post_create bpf_lsm_socket_post_create 8 lsm_cgroup socket_bind bpf_lsm_socket_bind 10 lsm_cgroup socket_alloc bpf_lsm_sk_alloc_security 11 lsm_cgroup socket_clone bpf_lsm_inet_csk_clone$ bpftool cgroup detach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_post_create $ bpftool cgroup tree CgroupPath ID AttachType AttachFlags Name /sys/fs/cgroup 8 lsm_cgroup socket_bind bpf_lsm_socket_bind 10 lsm_cgroup socket_alloc bpf_lsm_sk_alloc_security 11 lsm_cgroup socket_clone bpf_lsm_inet_csk_clone
Quoted 1 line
Signed-off-by Stanislav Fomichev <[email protected]>
The changes for bpftool look good to me, thanks!
Quoted 10 lines
--- tools/bpf/bpftool/cgroup.c | 80 +++++++++++++++++++++++++++----------- 1 file changed, 58 insertions(+), 22 deletions(-)tools/bpf/bpftool/cgroup.c +0
-0
tools/bpf/bpftool/cgroup.c static const struct cmd cmds[] = { · line 582
Quoted 6 lines
tools/bpf/bpftool/cgroup.c +1
-0@@ -542,5 +577,6 @@ static const struct cmd cmds[] = {int do_cgroup (int argc,char **argv) { + btf_vmlinux =libbpf_find_kernel_btf ();return cmd_select (cmds, argc, argv, do_help); }
This is not required for all "bpftool cgroup" operations (attach/detach don't need it I think), but should be inexpensive, right?
Quentin
Re: [PATCH bpf-next v9 09/10] bpftool: implement cgroup tree for BPF_LSM_CGROUP
Quoted 25 lines · Quentin Monnet
2022-06-10 09:58 UTC-0700 ~ Stanislav Fomichev <[email protected]>
Quoted 23 lines
$ bpftool --nomount prog loadall $KDIR/tools/testing/selftests/bpf/lsm_cgroup.o /sys/fs/bpf/x $ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_alloc $ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_bind $ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_clone $ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_post_create $ bpftool cgroup tree CgroupPath ID AttachType AttachFlags Name /sys/fs/cgroup 6 lsm_cgroup socket_post_create bpf_lsm_socket_post_create 8 lsm_cgroup socket_bind bpf_lsm_socket_bind 10 lsm_cgroup socket_alloc bpf_lsm_sk_alloc_security 11 lsm_cgroup socket_clone bpf_lsm_inet_csk_clone$ bpftool cgroup detach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_post_create $ bpftool cgroup tree CgroupPath ID AttachType AttachFlags Name /sys/fs/cgroup 8 lsm_cgroup socket_bind bpf_lsm_socket_bind 10 lsm_cgroup socket_alloc bpf_lsm_sk_alloc_security 11 lsm_cgroup socket_clone bpf_lsm_inet_csk_clone
Quoted 4 lines
Quoted 1 line
Signed-off-by Stanislav Fomichev <[email protected]>The changes for bpftool look good to me, thanks!
Reviewed-by Quentin Monnet <[email protected]>
Thank you for the review!
Quoted 11 lines
Quoted 11 lines
--- tools/bpf/bpftool/cgroup.c | 80 +++++++++++++++++++++++++++----------- 1 file changed, 58 insertions(+), 22 deletions(-)tools/bpf/bpftool/cgroup.c +0
-0@@ -542,5 +577,6 @@ static const struct cmd cmds[] = {
Quoted 8 lines
tools/bpf/bpftool/cgroup.c static const struct cmd cmds[] = { · line 582
Quoted 5 lines
tools/bpf/bpftool/cgroup.c +1
-0int do_cgroup (int argc,char **argv) { + btf_vmlinux =libbpf_find_kernel_btf ();return cmd_select (cmds, argc, argv, do_help); }This is not required for all "bpftool cgroup" operations (attach/detach don't need it I think), but should be inexpensive, right?
Good point, let's move it close to the place where we use it regardless of whether it's expensive or not.
Re: [PATCH bpf-next v9 09/10] bpftool: implement cgroup tree for BPF_LSM_CGROUP
In reply to Stanislav Fomichevtools/bpf/bpftool/cgroup.c static int show_bpf_prog(int id, enum bpf_attach_type attach_type, · line 96
Quoted 11 lines · Stanislav Fomichev
tools/bpf/bpftool/cgroup.c +7
-0@@ -84,6 +87,19 @@ static int show_bpf_prog(int id, enum bpf_attach_type attach_type, } attach_type_str =libbpf_bpf_attach_type_str (attach_type); + +if (btf_vmlinux && + info.attach_btf_id <btf__type_cnt (btf_vmlinux)) { +/* Note, we ignore info.attach_btf_obj_id for now. There +* is no good way to resolve btf_id to vmlinux +* or module btf. +*/
On usage could be using it to get the btf_info by bpf_obj_get_info_by_fd. Check for the kernel_btf == true and name is "vmlinux".
To be future proof, it can print <unknown> func for anything other than "vmlinux" btf.
Re: [PATCH bpf-next v9 09/10] bpftool: implement cgroup tree for BPF_LSM_CGROUP
Quoted 5 lines · Martin KaFai Lau
Quoted 3 lines · Stanislav Fomichev
(quoted diff) +0
-0@@ -84,6 +87,19 @@ static int show_bpf_prog(int id, enum bpf_attach_type attach_type, }
Quoted 12 lines
tools/bpf/bpftool/cgroup.c static int show_bpf_prog(int id, enum bpf_attach_type attach_type, · line 96
Quoted 8 lines
tools/bpf/bpftool/cgroup.c +7
-0attach_type_str =libbpf_bpf_attach_type_str (attach_type); + +if (btf_vmlinux && + info.attach_btf_id <btf__type_cnt (btf_vmlinux)) { +/* Note, we ignore info.attach_btf_obj_id for now. There +* is no good way to resolve btf_id to vmlinux +* or module btf. +*/ On usage could be using it to get the
btf_infobybpf_obj_get_info_by_fd. Check for thekernel_btf== true and name is "vmlinux".
To be future proof, it can print <unknown> func for anything other than "vmlinux" btf.
Thanks for the suggestion! I'll try to do it and cache btf_vmlinux_id if it's "vmlinux". What we really need is a way to obtain vmlinux btf_id and compare it against info.attach_btf_obj_id.
PATCH v9 10/10 selftests/bpf: lsm_cgroup functional test
In reply to Stanislav FomichevFunctional test that exercises the following:
1. apply default sk_priority policy
2. permit TX-only AF_PACKET socket
3. cgroup attach/detach/replace
4. reusing trampoline shim
--- .../selftests/bpf/prog_tests/lsm_cgroup.c | 277 ++++++++++++++++++ .../selftests/bpf/progs/bpf_tracing_net.h | 1 + .../testing/selftests/bpf/progs/lsm_cgroup.c | 180 ++++++++++++ 3 files changed, 458 insertions(+) create mode 100644 tools/testing/selftests/bpf/prog_tests/lsm_cgroup.c create mode 100644 tools/testing/selftests/bpf/progs/lsm_cgroup.c
tools/testing/selftests/bpf/prog_tests/lsm_cgroup.c new file +277 -0
@@ -0,0 +1,277 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <sys/types.h> +#include <sys/socket.h> +#include <test_progs.h> +#include <bpf/btf.h> + +#include "lsm_cgroup.skel.h" +#include "cgroup_helpers.h" +#include "network_helpers.h" + +static __u32 query_prog_cnt (int cgroup_fd,const char *attach_func) +{ +LIBBPF_OPTS (bpf_prog_query_opts, p); +static struct btf *btf; +int cnt =0 ; +int i; + +ASSERT_OK (bpf_prog_query_opts (cgroup_fd,BPF_LSM_CGROUP , &p),"prog_query" ); + +if (!attach_func) +return p.prog_cnt; + +/* When attach_func is provided, count the number of progs that +* attach to the given symbol. +*/ + +if (!btf) + btf =btf__load_vmlinux_btf (); +if (!ASSERT_OK (libbpf_get_error (btf),"btf_vmlinux" )) +return -1 ; + + p.prog_ids =malloc (sizeof (u32) * p.prog_cnt); + p.prog_attach_flags =malloc (sizeof (u32) * p.prog_cnt); +ASSERT_OK (bpf_prog_query_opts (cgroup_fd,BPF_LSM_CGROUP , &p),"prog_query" ); + +for (i =0 ; i < p.prog_cnt; i++) { +struct bpf_prog_info info = {}; +__u32 info_len =sizeof (info); +int fd; + + fd =bpf_prog_get_fd_by_id (p.prog_ids[i]); +ASSERT_GE (fd,0 ,"prog_get_fd_by_id" ); +ASSERT_OK (bpf_obj_get_info_by_fd (fd, &info, &info_len),"prog_info_by_fd" ); +close (fd); + +if (info.attach_btf_id == +btf__find_by_name_kind (btf, attach_func,BTF_KIND_FUNC )) + cnt++; + } + +return cnt; +} + +static void test_lsm_cgroup_functional (void ) +{ +DECLARE_LIBBPF_OPTS (bpf_prog_attach_opts, attach_opts); +DECLARE_LIBBPF_OPTS (bpf_link_update_opts, update_opts); +int cgroup_fd, cgroup_fd2, err, fd, prio; +int listen_fd, client_fd, accepted_fd; +struct lsm_cgroup *skel =NULL ; +int post_create_prog_fd2 =-1 ; +int post_create_prog_fd =-1 ; +int bind_link_fd2 =-1 ; +int bind_prog_fd2 =-1 ; +int alloc_prog_fd =-1 ; +int bind_prog_fd =-1 ; +int bind_link_fd =-1 ; +int clone_prog_fd =-1 ; +socklen_t socklen; + + cgroup_fd =test__join_cgroup ("/sock_policy" ); +if (!ASSERT_GE (cgroup_fd,0 ,"join_cgroup" )) + goto close_skel; + + cgroup_fd2 =create_and_get_cgroup ("/sock_policy2" ); +if (!ASSERT_GE (cgroup_fd2,0 ,"create second cgroup" )) + goto close_skel; + + skel =lsm_cgroup__open_and_load (); +if (!ASSERT_OK_PTR (skel,"open_and_load" )) + goto close_cgroup; + + post_create_prog_fd =bpf_program__fd (skel->progs.socket_post_create); + post_create_prog_fd2 =bpf_program__fd (skel->progs.socket_post_create2); + bind_prog_fd =bpf_program__fd (skel->progs.socket_bind); + bind_prog_fd2 =bpf_program__fd (skel->progs.socket_bind2); + alloc_prog_fd =bpf_program__fd (skel->progs.socket_alloc); + clone_prog_fd =bpf_program__fd (skel->progs.socket_clone); + +ASSERT_EQ (query_prog_cnt (cgroup_fd,"bpf_lsm_sk_alloc_security" ),0 ,"prog count" ); +ASSERT_EQ (query_prog_cnt (cgroup_fd,NULL ),0 ,"total prog count" ); + err =bpf_prog_attach (alloc_prog_fd, cgroup_fd,BPF_LSM_CGROUP ,0 ); +if (!ASSERT_OK (err,"attach alloc_prog_fd" )) + goto detach_cgroup; +ASSERT_EQ (query_prog_cnt (cgroup_fd,"bpf_lsm_sk_alloc_security" ),1 ,"prog count" ); +ASSERT_EQ (query_prog_cnt (cgroup_fd,NULL ),1 ,"total prog count" ); + +ASSERT_EQ (query_prog_cnt (cgroup_fd,"bpf_lsm_inet_csk_clone" ),0 ,"prog count" ); + err =bpf_prog_attach (clone_prog_fd, cgroup_fd,BPF_LSM_CGROUP ,0 ); +if (!ASSERT_OK (err,"attach clone_prog_fd" )) + goto detach_cgroup; +ASSERT_EQ (query_prog_cnt (cgroup_fd,"bpf_lsm_inet_csk_clone" ),1 ,"prog count" ); +ASSERT_EQ (query_prog_cnt (cgroup_fd,NULL ),2 ,"total prog count" ); + +/* Make sure replacing works. */ + +ASSERT_EQ (query_prog_cnt (cgroup_fd,"bpf_lsm_socket_post_create" ),0 ,"prog count" ); + err =bpf_prog_attach (post_create_prog_fd, cgroup_fd, +BPF_LSM_CGROUP ,0 ); +if (!ASSERT_OK (err,"attach post_create_prog_fd" )) + goto close_cgroup; +ASSERT_EQ (query_prog_cnt (cgroup_fd,"bpf_lsm_socket_post_create" ),1 ,"prog count" ); +ASSERT_EQ (query_prog_cnt (cgroup_fd,NULL ),3 ,"total prog count" ); + + attach_opts.replace_prog_fd = post_create_prog_fd; + err =bpf_prog_attach_opts (post_create_prog_fd2, cgroup_fd, +BPF_LSM_CGROUP , &attach_opts); +if (!ASSERT_OK (err,"prog replace post_create_prog_fd" )) + goto detach_cgroup; +ASSERT_EQ (query_prog_cnt (cgroup_fd,"bpf_lsm_socket_post_create" ),1 ,"prog count" ); +ASSERT_EQ (query_prog_cnt (cgroup_fd,NULL ),3 ,"total prog count" ); + +/* Try the same attach/replace via link API. */ + +ASSERT_EQ (query_prog_cnt (cgroup_fd,"bpf_lsm_socket_bind" ),0 ,"prog count" ); + bind_link_fd =bpf_link_create (bind_prog_fd, cgroup_fd, +BPF_LSM_CGROUP ,NULL ); +if (!ASSERT_GE (bind_link_fd,0 ,"link create bind_prog_fd" )) + goto detach_cgroup; +ASSERT_EQ (query_prog_cnt (cgroup_fd,"bpf_lsm_socket_bind" ),1 ,"prog count" ); +ASSERT_EQ (query_prog_cnt (cgroup_fd,NULL ),4 ,"total prog count" ); + + update_opts.old_prog_fd = bind_prog_fd; + update_opts.flags =BPF_F_REPLACE ; + + err =bpf_link_update (bind_link_fd, bind_prog_fd2, &update_opts); +if (!ASSERT_OK (err,"link update bind_prog_fd" )) + goto detach_cgroup; +ASSERT_EQ (query_prog_cnt (cgroup_fd,"bpf_lsm_socket_bind" ),1 ,"prog count" ); +ASSERT_EQ (query_prog_cnt (cgroup_fd,NULL ),4 ,"total prog count" ); + +/* Attach another instance of bind program to another cgroup. +* This should trigger the reuse of the trampoline shim (two +* programs attaching to the same btf_id). +*/ + +ASSERT_EQ (query_prog_cnt (cgroup_fd,"bpf_lsm_socket_bind" ),1 ,"prog count" ); +ASSERT_EQ (query_prog_cnt (cgroup_fd2,"bpf_lsm_socket_bind" ),0 ,"prog count" ); + bind_link_fd2 =bpf_link_create (bind_prog_fd2, cgroup_fd2, +BPF_LSM_CGROUP ,NULL ); +if (!ASSERT_GE (bind_link_fd2,0 ,"link create bind_prog_fd2" )) + goto detach_cgroup; +ASSERT_EQ (query_prog_cnt (cgroup_fd2,"bpf_lsm_socket_bind" ),1 ,"prog count" ); +ASSERT_EQ (query_prog_cnt (cgroup_fd,NULL ),4 ,"total prog count" ); +ASSERT_EQ (query_prog_cnt (cgroup_fd2,NULL ),1 ,"total prog count" ); + +/* AF_UNIX is prohibited. */ + + fd =socket (AF_UNIX ,SOCK_STREAM ,0 ); +ASSERT_LT (fd,0 ,"socket(AF_UNIX)" ); + +/* AF_INET6 gets default policy (sk_priority). */ + + fd =socket (AF_INET6 ,SOCK_STREAM ,0 ); +if (!ASSERT_GE (fd,0 ,"socket(SOCK_STREAM)" )) + goto detach_cgroup; + + prio =0 ; + socklen =sizeof (prio); +ASSERT_GE (getsockopt (fd,SOL_SOCKET ,SO_PRIORITY , &prio, &socklen),0 , +"getsockopt" ); +ASSERT_EQ (prio,123 ,"sk_priority" ); + +close (fd); + +/* TX-only AF_PACKET is allowed. */ + +ASSERT_LT (socket (AF_PACKET ,SOCK_RAW ,htons (ETH_P_ALL )),0 , +"socket(AF_PACKET, ..., ETH_P_ALL)" ); + + fd =socket (AF_PACKET ,SOCK_RAW ,0 ); +ASSERT_GE (fd,0 ,"socket(AF_PACKET, ..., 0)" ); + +/* TX-only AF_PACKET can not be rebound. */ + +struct sockaddr_ll sa = { + .sll_family =AF_PACKET , + .sll_protocol =htons (ETH_P_ALL ), + }; +ASSERT_LT (bind (fd, (struct sockaddr *)&sa,sizeof (sa)),0 , +"bind(ETH_P_ALL)" ); + +close (fd); + +/* Trigger passive open. */ + + listen_fd =start_server (AF_INET6 ,SOCK_STREAM ,"::1" ,0 ,0 ); +ASSERT_GE (listen_fd,0 ,"start_server" ); + client_fd =connect_to_fd (listen_fd,0 ); +ASSERT_GE (client_fd,0 ,"connect_to_fd" ); + accepted_fd =accept (listen_fd,NULL ,NULL ); +ASSERT_GE (accepted_fd,0 ,"accept" ); + + prio =0 ; + socklen =sizeof (prio); +ASSERT_GE (getsockopt (accepted_fd,SOL_SOCKET ,SO_PRIORITY , &prio, &socklen),0 , +"getsockopt" ); +ASSERT_EQ (prio,234 ,"sk_priority" ); + +/* These are replaced and never called. */ +ASSERT_EQ (skel->bss->called_socket_post_create,0 ,"called_create" ); +ASSERT_EQ (skel->bss->called_socket_bind,0 ,"called_bind" ); + +/* AF_INET6+SOCK_STREAM +* AF_PACKET+SOCK_RAW +* listen_fd +* client_fd +* accepted_fd +*/ +ASSERT_EQ (skel->bss->called_socket_post_create2,5 ,"called_create2" ); + +/* start_server +* bind(ETH_P_ALL) +*/ +ASSERT_EQ (skel->bss->called_socket_bind2,2 ,"called_bind2" ); +/* Single accept(). */ +ASSERT_EQ (skel->bss->called_socket_clone,1 ,"called_clone" ); + +/* AF_UNIX+SOCK_STREAM (failed) +* AF_INET6+SOCK_STREAM +* AF_PACKET+SOCK_RAW (failed) +* AF_PACKET+SOCK_RAW +* listen_fd +* client_fd +* accepted_fd +*/ +ASSERT_EQ (skel->bss->called_socket_alloc,7 ,"called_alloc" ); + +/* Make sure other cgroup doesn't trigger the programs. */ + +if (!ASSERT_OK (join_cgroup ("" ),"join root cgroup" )) + goto detach_cgroup; + + fd =socket (AF_INET6 ,SOCK_STREAM ,0 ); +if (!ASSERT_GE (fd,0 ,"socket(SOCK_STREAM)" )) + goto detach_cgroup; + + prio =0 ; + socklen =sizeof (prio); +ASSERT_GE (getsockopt (fd,SOL_SOCKET ,SO_PRIORITY , &prio, &socklen),0 , +"getsockopt" ); +ASSERT_EQ (prio,0 ,"sk_priority" ); + +close (fd); + +detach_cgroup: +ASSERT_GE (bpf_prog_detach2 (post_create_prog_fd2, cgroup_fd, +BPF_LSM_CGROUP ),0 ,"detach_create" ); +close (bind_link_fd); +/* Don't close bind_link_fd2, exercise cgroup release cleanup. */ +ASSERT_GE (bpf_prog_detach2 (alloc_prog_fd, cgroup_fd, +BPF_LSM_CGROUP ),0 ,"detach_alloc" ); +ASSERT_GE (bpf_prog_detach2 (clone_prog_fd, cgroup_fd, +BPF_LSM_CGROUP ),0 ,"detach_clone" ); + +close_cgroup: +close (cgroup_fd); +close_skel: +lsm_cgroup__destroy (skel); +} + +void test_lsm_cgroup (void ) +{ +if (test__start_subtest ("functional" )) +test_lsm_cgroup_functional (); +}
tools/testing/selftests/bpf/progs/bpf_tracing_net.h +1 -0
@@ -8,6 +8,7 @@#define SOL_SOCKET 1#define SO_SNDBUF 7#define __SO_ACCEPTCON (1 << 16) +#define SO_PRIORITY 12#define SOL_TCP 6#define TCP_CONGESTION 13
tools/testing/selftests/bpf/progs/lsm_cgroup.c new file +180 -0
180 lines not on this page · raw message
Signature · 1 line
2.36.1.476.g0c4daa206d-goog