Skip to contentSkip to conversation

rcu-tasks: Delay rcu_tasks_verify_self_tests() to avoid missed callbacks

PATCH In review Waiman Long 2 participants 5 messages Jun 10, 2022 – Jun 13, 2022 RCU

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 rcu-tasks: Delay rcu_tasks_verify_self_tests() to avoid missed callbacks

Even though rcu_tasks selftest is initiated early in the boot process, the verification done at late initcall time may not be late enough to catch all the callbacks especially on systems with just a few cpus and small memory.

After 12 bootup's On a s390x system, 1 of them had failed rcu_tasks verification test.

[    8.183013] call_rcu_tasks() has been failed.
[    8.183041] WARNING: CPU: 0 PID: 1 at kernel/rcu/tasks.h:1696 rcu_tasks_verify_self_tests+0x64/0xd0
[    8.203246] Callback from call_rcu_tasks() invoked.

In this particular case, the callback missed the check by about 20ms. Similar rcu_tasks selftest failures are also seen in ppc64le systems.

[    0.313391] call_rcu_tasks() has been failed.
[    0.313407] WARNING: CPU: 0 PID: 1 at kernel/rcu/tasks.h:1696 rcu_tasks_verify_self_tests+0x5c/0xa0
[    0.335569] Callback from call_rcu_tasks() invoked.

Avoid this missed callback by delaying the verification using delayed_work. The delay is set to be about 0.1s which hopefully will be long enough to catch all the callbacks on systems with few cpus and small memory.

Fixes bfba7ed084f8 ("rcu-tasks: Add RCU-tasks self tests")
---
 kernel/rcu/tasks.h | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)
kernel/rcu/tasks.h +16 -3
index 3925e32159b5..25f964a671ba 100644
@@ -1735,7 +1735,7 @@ static void rcu_tasks_initiate_self_tests(void)
 #endif
 }
 
-static int rcu_tasks_verify_self_tests(void)
+static void rcu_tasks_verify_self_tests(struct work_struct *work __maybe_unused)
 {
 	int ret = 0;
 	int i;
@@ -1749,10 +1749,23 @@ static int rcu_tasks_verify_self_tests(void)
 
 	if (ret)
 		WARN_ON(1);
+}
+
+static struct delayed_work rcu_tasks_verify_work;
 
-	return ret;
+/*
+ * The rcu_tasks verification is done indirectly via the work queue to
+ * introduce an additional 0.1s delay to catch all the callbacks before
+ * the verification is done as late_initcall time may not be late enough
+ * to have all the callbacks fired.
+ */
+static int rcu_tasks_verify_schedule_work(void)
+{
+	INIT_DELAYED_WORK(&rcu_tasks_verify_work, rcu_tasks_verify_self_tests);
+	schedule_delayed_work(&rcu_tasks_verify_work, HZ/10);
+	return 0;
 }
-late_initcall(rcu_tasks_verify_self_tests);
+late_initcall(rcu_tasks_verify_schedule_work);
 #else /* #ifdef CONFIG_PROVE_RCU */
 static void rcu_tasks_initiate_self_tests(void) { }
 #endif /* #else #ifdef CONFIG_PROVE_RCU */
Signature · 1 line
2.31.1
maintainer Tested-by Zhouyi Zhou on v1 1/1
#1 lore raw
Quoted 20 lines · Waiman Long

Even though rcu_tasks selftest is initiated early in the boot process, the verification done at late initcall time may not be late enough to catch all the callbacks especially on systems with just a few cpus and small memory.

After 12 bootup's On a s390x system, 1 of them had failed rcu_tasks verification test.

[    8.183013] call_rcu_tasks() has been failed.
[    8.183041] WARNING: CPU: 0 PID: 1 at kernel/rcu/tasks.h:1696 rcu_tasks_verify_self_tests+0x64/0xd0
[    8.203246] Callback from call_rcu_tasks() invoked.

In this particular case, the callback missed the check by about 20ms. Similar rcu_tasks selftest failures are also seen in ppc64le systems.

[    0.313391] call_rcu_tasks() has been failed.
[    0.313407] WARNING: CPU: 0 PID: 1 at kernel/rcu/tasks.h:1696 rcu_tasks_verify_self_tests+0x5c/0xa0
[    0.335569] Callback from call_rcu_tasks() invoked.
Quoted 7 lines

Avoid this missed callback by delaying the verification using delayed_work. The delay is set to be about 0.1s which hopefully will be long enough to catch all the callbacks on systems with few cpus and small memory.

Fixes bfba7ed084f8 ("rcu-tasks: Add RCU-tasks self tests")

Good catch, thank you!

A few days ago, I queued this:

2585014188d5 ("rcu-tasks: Be more patient for RCU Tasks boot-time testing")

This is shown in full at the end of this email. Does this fix this problem for you?

Thanx, Paul

Quoted 45 lines
---
 kernel/rcu/tasks.h | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)
kernel/rcu/tasks.h +16 -3
index 3925e32159b5..25f964a671ba 100644
@@ -1735,7 +1735,7 @@ static void rcu_tasks_initiate_self_tests(void)
 #endif
 }
 
-static int rcu_tasks_verify_self_tests(void)
+static void rcu_tasks_verify_self_tests(struct work_struct *work __maybe_unused)
 {
 	int ret = 0;
 	int i;
@@ -1749,10 +1749,23 @@ static int rcu_tasks_verify_self_tests(void)
 
 	if (ret)
 		WARN_ON(1);
+}
+
+static struct delayed_work rcu_tasks_verify_work;
 
-	return ret;
+/*
+ * The rcu_tasks verification is done indirectly via the work queue to
+ * introduce an additional 0.1s delay to catch all the callbacks before
+ * the verification is done as late_initcall time may not be late enough
+ * to have all the callbacks fired.
+ */
+static int rcu_tasks_verify_schedule_work(void)
+{
+	INIT_DELAYED_WORK(&rcu_tasks_verify_work, rcu_tasks_verify_self_tests);
+	schedule_delayed_work(&rcu_tasks_verify_work, HZ/10);
+	return 0;
 }
-late_initcall(rcu_tasks_verify_self_tests);
+late_initcall(rcu_tasks_verify_schedule_work);
 #else /* #ifdef CONFIG_PROVE_RCU */
 static void rcu_tasks_initiate_self_tests(void) { }
 #endif /* #else #ifdef CONFIG_PROVE_RCU */
Signature · 1 line
2.31.1

------------------------------------------------------------------------

commit 2585014188d5e66052b4226b42602b6f3d921389

Author: Paul E. McKenney <[email protected]>
Date:   Tue Jun 7 15:23:52 2022 -0700

rcu-tasks: Be more patient for RCU Tasks boot-time testing

The RCU-Tasks family of grace-period primitives can take some time to complete, and the amount of time can depend on the exact hardware and software configuration. Some configurations boot up fast enough that the RCU-Tasks verification process gets false-positive failures. This commit therefore allows up to 30 seconds for the grace periods to complete, with this value adjustable downwards using the rcupdate.rcu_task_stall_timeout kernel boot parameter.

kernel/rcu/tasks.h +21 -7
index df6b2cb2f205d..fcbd0ec33c866 100644
@@ -145,6 +145,7 @@ static int rcu_task_ipi_delay __read_mostly = RCU_TASK_IPI_DELAY;
 module_param(rcu_task_ipi_delay, int, 0644);
 
 /* Control stall timeouts.  Disable with <= 0, otherwise jiffies till stall. */
+#define RCU_TASK_BOOT_STALL_TIMEOUT (HZ * 30)
 #define RCU_TASK_STALL_TIMEOUT (HZ * 60 * 10)
 static int rcu_task_stall_timeout __read_mostly = RCU_TASK_STALL_TIMEOUT;
 module_param(rcu_task_stall_timeout, int, 0644);
@@ -1776,23 +1777,24 @@ struct rcu_tasks_test_desc {
 	struct rcu_head rh;
 	const char *name;
 	bool notrun;
+	unsigned long runstart;
 };
 
 static struct rcu_tasks_test_desc tests[] = {
 	{
 		.name = "call_rcu_tasks()",
 		/* If not defined, the test is skipped. */
-		.notrun = !IS_ENABLED(CONFIG_TASKS_RCU),
+		.notrun = IS_ENABLED(CONFIG_TASKS_RCU),
 	},
 	{
 		.name = "call_rcu_tasks_rude()",
 		/* If not defined, the test is skipped. */
-		.notrun = !IS_ENABLED(CONFIG_TASKS_RUDE_RCU),
+		.notrun = IS_ENABLED(CONFIG_TASKS_RUDE_RCU),
 	},
 	{
 		.name = "call_rcu_tasks_trace()",
 		/* If not defined, the test is skipped. */
-		.notrun = !IS_ENABLED(CONFIG_TASKS_TRACE_RCU)
+		.notrun = IS_ENABLED(CONFIG_TASKS_TRACE_RCU)
 	}
 };
 
@@ -1803,23 +1805,28 @@ static void test_rcu_tasks_callback(struct rcu_head *rhp)
 
 	pr_info("Callback from %s invoked.\n", rttd->name);
 
-	rttd->notrun = true;
+	rttd->notrun = false;
 }
 
 static void rcu_tasks_initiate_self_tests(void)
 {
+	unsigned long j = jiffies;
+
 	pr_info("Running RCU-tasks wait API self tests\n");
 #ifdef CONFIG_TASKS_RCU
+	tests[0].runstart = j;
 	synchronize_rcu_tasks();
 	call_rcu_tasks(&tests[0].rh, test_rcu_tasks_callback);
 #endif
 
 #ifdef CONFIG_TASKS_RUDE_RCU
+	tests[1].runstart = j;
 	synchronize_rcu_tasks_rude();
 	call_rcu_tasks_rude(&tests[1].rh, test_rcu_tasks_callback);
 #endif
 
 #ifdef CONFIG_TASKS_TRACE_RCU
+	tests[2].runstart = j;
 	synchronize_rcu_tasks_trace();
 	call_rcu_tasks_trace(&tests[2].rh, test_rcu_tasks_callback);
 #endif
@@ -1829,11 +1836,18 @@ static int rcu_tasks_verify_self_tests(void)
 {
 	int ret = 0;
 	int i;
+	unsigned long bst = rcu_task_stall_timeout;
 
+	if (bst <= 0 || bst > RCU_TASK_BOOT_STALL_TIMEOUT)
+		bst = RCU_TASK_BOOT_STALL_TIMEOUT;
 	for (i = 0; i < ARRAY_SIZE(tests); i++) {
-		if (!tests[i].notrun) {		// still hanging.
-			pr_err("%s has been failed.\n", tests[i].name);
-			ret = -1;
+		while (tests[i].notrun) {		// still hanging.
+			if (time_after(jiffies, tests[i].runstart + bst)) {
+				pr_err("%s has failed boot-time tests.\n", tests[i].name);
+				ret = -1;
+				break;
+			}
+			schedule_timeout_uninterruptible(1);
 		}
 	}
 
#2 lore raw
Quoted 28 lines · Paul E. McKenney
Quoted 20 lines · Waiman Long

Even though rcu_tasks selftest is initiated early in the boot process, the verification done at late initcall time may not be late enough to catch all the callbacks especially on systems with just a few cpus and small memory.

After 12 bootup's On a s390x system, 1 of them had failed rcu_tasks verification test.

[    8.183013] call_rcu_tasks() has been failed.
[    8.183041] WARNING: CPU: 0 PID: 1 at kernel/rcu/tasks.h:1696 rcu_tasks_verify_self_tests+0x64/0xd0
[    8.203246] Callback from call_rcu_tasks() invoked.

In this particular case, the callback missed the check by about 20ms. Similar rcu_tasks selftest failures are also seen in ppc64le systems.

[    0.313391] call_rcu_tasks() has been failed.
[    0.313407] WARNING: CPU: 0 PID: 1 at kernel/rcu/tasks.h:1696 rcu_tasks_verify_self_tests+0x5c/0xa0
[    0.335569] Callback from call_rcu_tasks() invoked.
Quoted 7 lines

Avoid this missed callback by delaying the verification using delayed_work. The delay is set to be about 0.1s which hopefully will be long enough to catch all the callbacks on systems with few cpus and small memory.

Fixes bfba7ed084f8 ("rcu-tasks: Add RCU-tasks self tests")
Quoted 8 lines

Good catch, thank you!

A few days ago, I queued this:

2585014188d5 ("rcu-tasks: Be more patient for RCU Tasks boot-time testing")

This is shown in full at the end of this email. Does this fix this problem for you?

I think your patch should fix the false positive warning and it give plenty of time for this to happen.

I do have one question though. rcu_tasks_verify_selft_tests() is called from do_initcalls(). Since it may not be the last late initcall, does that mean other late initcalls queued after that may be delayed by a second or more?

Thanks,
Longman

Quoted 161 lines

Thanx, Paul

Quoted 45 lines
---
  kernel/rcu/tasks.h | 19 ++++++++++++++++---
  1 file changed, 16 insertions(+), 3 deletions(-)
kernel/rcu/tasks.h +16 -3
index 3925e32159b5..25f964a671ba 100644s
@@ -1735,7 +1735,7 @@ static void rcu_tasks_initiate_self_tests(void)
  #endif
  }
 
-static int rcu_tasks_verify_self_tests(void)
+static void rcu_tasks_verify_self_tests(struct work_struct *work __maybe_unused)
  {
  	int ret = 0;
  	int i;
@@ -1749,10 +1749,23 @@ static int rcu_tasks_verify_self_tests(void)
 
  	if (ret)
  		WARN_ON(1);
+}
+
+static struct delayed_work rcu_tasks_verify_work;
 
-	return ret;
+/*
+ * The rcu_tasks verification is done indirectly via the work queue to
+ * introduce an additional 0.1s delay to catch all the callbacks before
+ * the verification is done as late_initcall time may not be late enough
+ * to have all the callbacks fired.
+ */
+static int rcu_tasks_verify_schedule_work(void)
+{
+	INIT_DELAYED_WORK(&rcu_tasks_verify_work, rcu_tasks_verify_self_tests);
+	schedule_delayed_work(&rcu_tasks_verify_work, HZ/10);
+	return 0;
  }
-late_initcall(rcu_tasks_verify_self_tests);
+late_initcall(rcu_tasks_verify_schedule_work);
  #else /* #ifdef CONFIG_PROVE_RCU */
  static void rcu_tasks_initiate_self_tests(void) { }
  #endif /* #else #ifdef CONFIG_PROVE_RCU */
Signature · 1 line
2.31.1

------------------------------------------------------------------------

commit 2585014188d5e66052b4226b42602b6f3d921389

Author: Paul E. McKenney <[email protected]>
Date:   Tue Jun 7 15:23:52 2022 -0700

rcu-tasks: Be more patient for RCU Tasks boot-time testing

The RCU-Tasks family of grace-period primitives can take some time to complete, and the amount of time can depend on the exact hardware and software configuration. Some configurations boot up fast enough that the RCU-Tasks verification process gets false-positive failures. This commit therefore allows up to 30 seconds for the grace periods to complete, with this value adjustable downwards using the rcupdate.rcu_task_stall_timeout kernel boot parameter.

kernel/rcu/tasks.h +21 -7
index df6b2cb2f205d..fcbd0ec33c866 100644
@@ -145,6 +145,7 @@ static int rcu_task_ipi_delay __read_mostly = RCU_TASK_IPI_DELAY;
  module_param(rcu_task_ipi_delay, int, 0644);
 
  /* Control stall timeouts.  Disable with <= 0, otherwise jiffies till stall. */
+#define RCU_TASK_BOOT_STALL_TIMEOUT (HZ * 30)
  #define RCU_TASK_STALL_TIMEOUT (HZ * 60 * 10)
  static int rcu_task_stall_timeout __read_mostly = RCU_TASK_STALL_TIMEOUT;
  module_param(rcu_task_stall_timeout, int, 0644);
@@ -1776,23 +1777,24 @@ struct rcu_tasks_test_desc {
  	struct rcu_head rh;
  	const char *name;
  	bool notrun;
+	unsigned long runstart;
  };
 
  static struct rcu_tasks_test_desc tests[] = {
  	{
  		.name = "call_rcu_tasks()",
  		/* If not defined, the test is skipped. */
-		.notrun = !IS_ENABLED(CONFIG_TASKS_RCU),
+		.notrun = IS_ENABLED(CONFIG_TASKS_RCU),
  	},
  	{
  		.name = "call_rcu_tasks_rude()",
  		/* If not defined, the test is skipped. */
-		.notrun = !IS_ENABLED(CONFIG_TASKS_RUDE_RCU),
+		.notrun = IS_ENABLED(CONFIG_TASKS_RUDE_RCU),
  	},
  	{
  		.name = "call_rcu_tasks_trace()",
  		/* If not defined, the test is skipped. */
-		.notrun = !IS_ENABLED(CONFIG_TASKS_TRACE_RCU)
+		.notrun = IS_ENABLED(CONFIG_TASKS_TRACE_RCU)
  	}
  };
 
@@ -1803,23 +1805,28 @@ static void test_rcu_tasks_callback(struct rcu_head *rhp)
 
  	pr_info("Callback from %s invoked.\n", rttd->name);
 
-	rttd->notrun = true;
+	rttd->notrun = false;
  }
 
  static void rcu_tasks_initiate_self_tests(void)
  {
+	unsigned long j = jiffies;
+
  	pr_info("Running RCU-tasks wait API self tests\n");
  #ifdef CONFIG_TASKS_RCU
+	tests[0].runstart = j;
  	synchronize_rcu_tasks();
  	call_rcu_tasks(&tests[0].rh, test_rcu_tasks_callback);
  #endif
 
  #ifdef CONFIG_TASKS_RUDE_RCU
+	tests[1].runstart = j;
  	synchronize_rcu_tasks_rude();
  	call_rcu_tasks_rude(&tests[1].rh, test_rcu_tasks_callback);
  #endif
 
  #ifdef CONFIG_TASKS_TRACE_RCU
+	tests[2].runstart = j;
  	synchronize_rcu_tasks_trace();
  	call_rcu_tasks_trace(&tests[2].rh, test_rcu_tasks_callback);
  #endif
@@ -1829,11 +1836,18 @@ static int rcu_tasks_verify_self_tests(void)
  {
  	int ret = 0;
  	int i;
+	unsigned long bst = rcu_task_stall_timeout;
 
+	if (bst <= 0 || bst > RCU_TASK_BOOT_STALL_TIMEOUT)
+		bst = RCU_TASK_BOOT_STALL_TIMEOUT;
  	for (i = 0; i < ARRAY_SIZE(tests); i++) {
-		if (!tests[i].notrun) {		// still hanging.
-			pr_err("%s has been failed.\n", tests[i].name);
-			ret = -1;
+		while (tests[i].notrun) {		// still hanging.
+			if (time_after(jiffies, tests[i].runstart + bst)) {
+				pr_err("%s has failed boot-time tests.\n", tests[i].name);
+				ret = -1;
+				break;
+			}
+			schedule_timeout_uninterruptible(1);
  		}
  	}
 
maintainer
#3 lore raw
Quoted 38 lines · Waiman Long
Quoted 28 lines · Paul E. McKenney
Quoted 20 lines · Waiman Long

Even though rcu_tasks selftest is initiated early in the boot process, the verification done at late initcall time may not be late enough to catch all the callbacks especially on systems with just a few cpus and small memory.

After 12 bootup's On a s390x system, 1 of them had failed rcu_tasks verification test.

[    8.183013] call_rcu_tasks() has been failed.
[    8.183041] WARNING: CPU: 0 PID: 1 at kernel/rcu/tasks.h:1696 rcu_tasks_verify_self_tests+0x64/0xd0
[    8.203246] Callback from call_rcu_tasks() invoked.

In this particular case, the callback missed the check by about 20ms. Similar rcu_tasks selftest failures are also seen in ppc64le systems.

[    0.313391] call_rcu_tasks() has been failed.
[    0.313407] WARNING: CPU: 0 PID: 1 at kernel/rcu/tasks.h:1696 rcu_tasks_verify_self_tests+0x5c/0xa0
[    0.335569] Callback from call_rcu_tasks() invoked.
Quoted 7 lines

Avoid this missed callback by delaying the verification using delayed_work. The delay is set to be about 0.1s which hopefully will be long enough to catch all the callbacks on systems with few cpus and small memory.

Fixes bfba7ed084f8 ("rcu-tasks: Add RCU-tasks self tests")
Quoted 8 lines

Good catch, thank you!

A few days ago, I queued this:

2585014188d5 ("rcu-tasks: Be more patient for RCU Tasks boot-time testing")

This is shown in full at the end of this email. Does this fix this problem for you?

Quoted 6 lines

I think your patch should fix the false positive warning and it give plenty of time for this to happen.

I do have one question though. rcu_tasks_verify_selft_tests() is called from do_initcalls(). Since it may not be the last late initcall, does that mean other late initcalls queued after that may be delayed by a second or more?

Indeed. Which is why I would welcome the workqueues portion of your patch on top of the above patch in -rcu. ;-)

Thanx, Paul

Quoted 145 lines
Quoted 144 lines
Quoted 42 lines
---
  kernel/rcu/tasks.h | 19 ++++++++++++++++---
  1 file changed, 16 insertions(+), 3 deletions(-)
kernel/rcu/tasks.h +16 -3
index 3925e32159b5..25f964a671ba 100644s
@@ -1735,7 +1735,7 @@ static void rcu_tasks_initiate_self_tests(void)
  #endif
  }
-static int rcu_tasks_verify_self_tests(void)
+static void rcu_tasks_verify_self_tests(struct work_struct *work __maybe_unused)
  {
  	int ret = 0;
  	int i;
@@ -1749,10 +1749,23 @@ static int rcu_tasks_verify_self_tests(void)
  	if (ret)
  		WARN_ON(1);
+}
+
+static struct delayed_work rcu_tasks_verify_work;
-	return ret;
+/*
+ * The rcu_tasks verification is done indirectly via the work queue to
+ * introduce an additional 0.1s delay to catch all the callbacks before
+ * the verification is done as late_initcall time may not be late enough
+ * to have all the callbacks fired.
+ */
+static int rcu_tasks_verify_schedule_work(void)
+{
+	INIT_DELAYED_WORK(&rcu_tasks_verify_work, rcu_tasks_verify_self_tests);
+	schedule_delayed_work(&rcu_tasks_verify_work, HZ/10);
+	return 0;
  }
-late_initcall(rcu_tasks_verify_self_tests);
+late_initcall(rcu_tasks_verify_schedule_work);
  #else /* #ifdef CONFIG_PROVE_RCU */
  static void rcu_tasks_initiate_self_tests(void) { }
  #endif /* #else #ifdef CONFIG_PROVE_RCU */
Signature · 1 line
2.31.1

------------------------------------------------------------------------

commit 2585014188d5e66052b4226b42602b6f3d921389

Author: Paul E. McKenney <[email protected]>
Date:   Tue Jun 7 15:23:52 2022 -0700

rcu-tasks: Be more patient for RCU Tasks boot-time testing The RCU-Tasks family of grace-period primitives can take some time to complete, and the amount of time can depend on the exact hardware and software configuration. Some configurations boot up fast enough that the RCU-Tasks verification process gets false-positive failures. This commit therefore allows up to 30 seconds for the grace periods to complete, with this value adjustable downwards using the rcupdate.rcu_task_stall_timeout kernel boot parameter.

kernel/rcu/tasks.h +21 -7
index df6b2cb2f205d..fcbd0ec33c866 100644
@@ -145,6 +145,7 @@ static int rcu_task_ipi_delay __read_mostly = RCU_TASK_IPI_DELAY;
  module_param(rcu_task_ipi_delay, int, 0644);
  /* Control stall timeouts.  Disable with <= 0, otherwise jiffies till stall. */
+#define RCU_TASK_BOOT_STALL_TIMEOUT (HZ * 30)
  #define RCU_TASK_STALL_TIMEOUT (HZ * 60 * 10)
  static int rcu_task_stall_timeout __read_mostly = RCU_TASK_STALL_TIMEOUT;
  module_param(rcu_task_stall_timeout, int, 0644);
@@ -1776,23 +1777,24 @@ struct rcu_tasks_test_desc {
  	struct rcu_head rh;
  	const char *name;
  	bool notrun;
+	unsigned long runstart;
  };
  static struct rcu_tasks_test_desc tests[] = {
  	{
  		.name = "call_rcu_tasks()",
  		/* If not defined, the test is skipped. */
-		.notrun = !IS_ENABLED(CONFIG_TASKS_RCU),
+		.notrun = IS_ENABLED(CONFIG_TASKS_RCU),
  	},
  	{
  		.name = "call_rcu_tasks_rude()",
  		/* If not defined, the test is skipped. */
-		.notrun = !IS_ENABLED(CONFIG_TASKS_RUDE_RCU),
+		.notrun = IS_ENABLED(CONFIG_TASKS_RUDE_RCU),
  	},
  	{
  		.name = "call_rcu_tasks_trace()",
  		/* If not defined, the test is skipped. */
-		.notrun = !IS_ENABLED(CONFIG_TASKS_TRACE_RCU)
+		.notrun = IS_ENABLED(CONFIG_TASKS_TRACE_RCU)
  	}
  };
@@ -1803,23 +1805,28 @@ static void test_rcu_tasks_callback(struct rcu_head *rhp)
  	pr_info("Callback from %s invoked.\n", rttd->name);
-	rttd->notrun = true;
+	rttd->notrun = false;
  }
  static void rcu_tasks_initiate_self_tests(void)
  {
+	unsigned long j = jiffies;
+
  	pr_info("Running RCU-tasks wait API self tests\n");
  #ifdef CONFIG_TASKS_RCU
+	tests[0].runstart = j;
  	synchronize_rcu_tasks();
  	call_rcu_tasks(&tests[0].rh, test_rcu_tasks_callback);
  #endif
  #ifdef CONFIG_TASKS_RUDE_RCU
+	tests[1].runstart = j;
  	synchronize_rcu_tasks_rude();
  	call_rcu_tasks_rude(&tests[1].rh, test_rcu_tasks_callback);
  #endif
  #ifdef CONFIG_TASKS_TRACE_RCU
+	tests[2].runstart = j;
  	synchronize_rcu_tasks_trace();
  	call_rcu_tasks_trace(&tests[2].rh, test_rcu_tasks_callback);
  #endif
@@ -1829,11 +1836,18 @@ static int rcu_tasks_verify_self_tests(void)
  {
  	int ret = 0;
  	int i;
+	unsigned long bst = rcu_task_stall_timeout;
+	if (bst <= 0 || bst > RCU_TASK_BOOT_STALL_TIMEOUT)
+		bst = RCU_TASK_BOOT_STALL_TIMEOUT;
  	for (i = 0; i < ARRAY_SIZE(tests); i++) {
-		if (!tests[i].notrun) {		// still hanging.
-			pr_err("%s has been failed.\n", tests[i].name);
-			ret = -1;
+		while (tests[i].notrun) {		// still hanging.
+			if (time_after(jiffies, tests[i].runstart + bst)) {
+				pr_err("%s has failed boot-time tests.\n", tests[i].name);
+				ret = -1;
+				break;
+			}
+			schedule_timeout_uninterruptible(1);
  		}
  	}
 
#4 lore raw
Quoted 38 lines · Paul E. McKenney
Quoted 37 lines · Waiman Long
Quoted 36 lines · Paul E. McKenney
Quoted 20 lines · Waiman Long

Even though rcu_tasks selftest is initiated early in the boot process, the verification done at late initcall time may not be late enough to catch all the callbacks especially on systems with just a few cpus and small memory.

After 12 bootup's On a s390x system, 1 of them had failed rcu_tasks verification test.

[    8.183013] call_rcu_tasks() has been failed.
[    8.183041] WARNING: CPU: 0 PID: 1 at kernel/rcu/tasks.h:1696 rcu_tasks_verify_self_tests+0x64/0xd0
[    8.203246] Callback from call_rcu_tasks() invoked.

In this particular case, the callback missed the check by about 20ms. Similar rcu_tasks selftest failures are also seen in ppc64le systems.

[    0.313391] call_rcu_tasks() has been failed.
[    0.313407] WARNING: CPU: 0 PID: 1 at kernel/rcu/tasks.h:1696 rcu_tasks_verify_self_tests+0x5c/0xa0
[    0.335569] Callback from call_rcu_tasks() invoked.
Quoted 7 lines

Avoid this missed callback by delaying the verification using delayed_work. The delay is set to be about 0.1s which hopefully will be long enough to catch all the callbacks on systems with few cpus and small memory.

Fixes bfba7ed084f8 ("rcu-tasks: Add RCU-tasks self tests")

Good catch, thank you!

A few days ago, I queued this:

2585014188d5 ("rcu-tasks: Be more patient for RCU Tasks boot-time testing")

This is shown in full at the end of this email. Does this fix this problem for you?

Quoted 8 lines
Quoted 6 lines

I think your patch should fix the false positive warning and it give plenty of time for this to happen.

I do have one question though. rcu_tasks_verify_selft_tests() is called from do_initcalls(). Since it may not be the last late initcall, does that mean other late initcalls queued after that may be delayed by a second or more?

Indeed. Which is why I would welcome the workqueues portion of your patch on top of the above patch in -rcu. ;-)

Sure. I will work on such a follow-up patch.

Cheers,
Longman