Updates for omap3-evm
cover Updates for omap3-evm
This patch set brings omap3-evm inline with similar boards and improves the ability to boot a 'fitImage' using DEFAULT_FIT_TI_ARGS.
Derald D. Woods (3):
ARM: omap3: evm: Power on MMC when setting up PMIC
ARM: omap3: evm: Complete DM_I2C migration
ARM: omap3: evm: Fix 'fitImage' booting
board/ti/evm/evm.c | 8 +------- configs/omap3_evm_defconfig | 11 +++++++---- 2 files changed, 8 insertions(+), 11 deletions(-)
Signature · 1 line
2.36.1
PATCH 1/3 ARM: omap3: evm: Power on MMC when setting up PMIC
This commit copies the related code changes from the BeagleBoard.
Reference:
- https://source.denx.de/u-boot/u-boot/-/commit/848cfe098f59c47a2542385513fb554430b874d6
--- board/ti/evm/evm.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-)
board/ti/evm/evm.c +1 -7
@@ -159,6 +159,7 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)int misc_init_r (void ) {twl4030_power_init (); +twl4030_power_mmc_init (0 );#if defined(CONFIG_SMC911X )setup_net_chip ();
@@ -247,10 +248,3 @@ static void reset_net_chip(void) gpio_set_value(rst_gpio, 1); }#endif /* CONFIG_SMC911X */ - -#if defined(CONFIG_MMC ) -void board_mmc_power_init (void ) -{ -twl4030_power_mmc_init (0 ); -} -#endif /* CONFIG_MMC */
Signature · 1 line
2.36.1
Re: [PATCH 1/3] ARM: omap3: evm: Power on MMC when setting up PMIC
Quoted 6 lines · Derald D. Woods
This commit copies the related code changes from the BeagleBoard.
Reference:
- https://source.denx.de/u-boot/u-boot/-/commit/848cfe098f59c47a2542385513fb554430b874d6Signed-off-by Derald D. Woods <[email protected]>
Applied to u-boot/next, thanks!
Signature · 1 line
Tom
PATCH 2/3 ARM: omap3: evm: Complete DM_I2C migration
In reply to Derald D. WoodsThis commits enables DM_I2C and sets the default bus to 0.
--- configs/omap3_evm_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
configs/omap3_evm_defconfig +2 -2
@@ -56,8 +56,8 @@ CONFIG_SPL_OF_TRANSLATE=y CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x82000000 CONFIG_GPIO_HOG=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_DM_I2C=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_MMC_OMAP_HS=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y
Signature · 1 line
2.36.1
Re: [PATCH 2/3] ARM: omap3: evm: Complete DM_I2C migration
Quoted 3 lines · Derald D. Woods
This commits enables
DM_I2Cand sets the default bus to 0.Signed-off-by Derald D. Woods <[email protected]>
Applied to u-boot/next, thanks!
Signature · 1 line
Tom
PATCH 3/3 ARM: omap3: evm: Fix 'fitImage' booting
In reply to Derald D. WoodsThis commit sets two additional variables in the default BOOTCOMMAND. Adding 'boot=mmc' and 'addr_fit=0x8b000000' removes the need for a special 'uEnv.txt' to be created. The 'addr_fit' variable is the key piece here. It is normally defined as 0x90000000, in the macro DEFAULT_FIT_TI_ARGS. For this OMAP34XX board, 0x8b000000 works without touching other varibles. This was tested with a 'fitImage' created using the following FIT source:
----------------------------------------------------------------------
/dts-v1/;
/ {
description = "Simple image with single Linux kernel and FDT blob";
#address-cells = <1>;
images {
kernel {
description = "Linux kernel: omap2plus";
data = /incbin/("./zImage");
type = "kernel";
arch = "arm";
os = "linux";
compression = "none";
load = <0x80008000>;
entry = <0x80008000>;
hash-1 {
algo = "sha256";
};
};
fdt-omap3-evm.dtb {
description = "FDT: omap3-evm.dtb";
data = /incbin/("./omap3-evm.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
load = <0x8ff00000>;
hash-1 {
algo = "sha256";
};
};
};
configurations {
default = "conf-omap3-evm.dtb";
conf-omap3-evm.dtb {
description = "Boot Linux kernel with FDT blob";
kernel = "kernel";
fdt = "fdt-omap3-evm.dtb";
};
};
};----------------------------------------------------------------------
Additionally, the default environment is now stored in "uboot.env" on the FAT partition of MMC '0'.
--- configs/omap3_evm_defconfig | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
configs/omap3_evm_defconfig +5 -2
@@ -10,7 +10,7 @@ CONFIG_TARGET_OMAP3_EVM=y CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run envboot; run distro_bootcmd" +CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then setenv boot mmc; setenv addr_fit 0x8b000000; run update_to_fit; run mmcboot; fi; run envboot; run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="omap3-evm.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y
@@ -48,7 +48,10 @@ CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent" CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y +CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y
Signature · 1 line
2.36.1
Re: [PATCH 3/3] ARM: omap3: evm: Fix 'fitImage' booting
Quoted 8 lines · Derald D. Woods
This commit sets two additional variables in the default BOOTCOMMAND. Adding 'boot=mmc' and 'addr_fit=0x8b000000' removes the need for a special 'uEnv.txt' to be created. The '
addr_fit' variable is the key piece here. It is normally defined as0x90000000, in the macroDEFAULT_FIT_TI_ARGS. For this OMAP34XX board,0x8b000000works without touching other varibles. This was tested with a 'fitImage' created using the following FIT source:
Applied to u-boot/next, thanks!
Signature · 1 line
Tom
Quoted 8 lines · Derald D. Woods
This patch set brings omap3-evm inline with similar boards and improves the ability to boot a 'fitImage' using
DEFAULT_FIT_TI_ARGS.Derald D. Woods (3):
ARM: omap3: evm: Power on MMC when setting up PMIC
ARM: omap3: evm: CompleteDM_I2Cmigration
ARM: omap3: evm: Fix 'fitImage' booting
Quoted 8 lines
board/ti/evm/evm.c | 8 +------- configs/omap3_evm_defconfig | 11 +++++++---- 2 files changed, 8 insertions(+), 11 deletions(-)--
2.36.1
Ping.
Quoted 11 lines · Derald Woods
Quoted 8 lines · Derald D. Woods
This patch set brings omap3-evm inline with similar boards and improves the ability to boot a 'fitImage' using
DEFAULT_FIT_TI_ARGS.Derald D. Woods (3):
ARM: omap3: evm: Power on MMC when setting up PMIC
ARM: omap3: evm: CompleteDM_I2Cmigration
ARM: omap3: evm: Fix 'fitImage' booting
Quoted 5 lines
Quoted 3 lines
board/ti/evm/evm.c | 8 +------- configs/omap3_evm_defconfig | 11 +++++++---- 2 files changed, 8 insertions(+), 11 deletions(-)Ping.
Now that -next is open, I'll pick these up soon. Unless they need to
be in v2022.07? Thanks!
Signature · 1 line
Tom
Quoted 17 lines · Tom Rini
Quoted 1 line · Derald Woods
On Sun, May 15, 2022 at 10:25 PM Derald D. Woods <
Quoted 14 lines
Quoted 11 lines · wrote:
This patch set brings omap3-evm inline with similar boards and improves the ability to boot a 'fitImage' using
DEFAULT_FIT_TI_ARGS.Derald D. Woods (3):
ARM: omap3: evm: Power on MMC when setting up PMIC
ARM: omap3: evm: CompleteDM_I2Cmigration
ARM: omap3: evm: Fix 'fitImage' bootingboard/ti/evm/evm.c | 8 +------- configs/omap3_evm_defconfig | 11 +++++++---- 2 files changed, 8 insertions(+), 11 deletions(-)
Quoted 8 lines
Quoted 1 line
Ping.
Now that -next is open, I'll pick these up soon. Unless they need to
be in v2022.07? Thanks!--
Tom
That's fine. Thanks for the update.
Derald