Skip to contentSkip to conversation

bpf_loop inlining

PATCH Superseded Eduard Zingerman 2 participants 7 messages Jun 11, 2022 – Jun 13, 2022

Subsystems (5)
Kselftest BPF BPF selftests BPF core +1 more subsystems

v5 of 8 Superseded Latest is v8 →

lore
Share & tools
lore

Eduard Zingerman

author maintainer
#0 lore raw

v5 cover bpf_loop inlining

Hi Everyone,

This is the next iteration of the patch. It includes changes suggested by Song, Joanne and Alexei. Please find updated intro message and change log below.

This patch implements inlining of calls to bpf_loop helper function when bpf_loop's callback is statically known. E.g. the rewrite does the following transformation during BPF program processing:

  bpf_loop(10, foo, NULL, 0);

->

  for (int i = 0; i < 10; ++i)
    foo(i, NULL);

The transformation leads to measurable latency change for simple loops. Measurements using benchs/run_bench_bpf_loop.sh inside QEMU / KVM on i7-4710HQ CPU show a drop in latency from 14 ns/op to 2 ns/op.

The change is split in five parts:

* Update to test_verifier.c to specify expected and unexpected instruction sequences. This allows to check BPF program rewrites applied by e.g. do_mix_fixups function.

* Update to test_verifier.c to specify BTF function infos and types per test case. This is necessary for tests that load sub-program addresses to a variable because of the checks applied by check_ld_imm function.

* The update to verifier.c that tracks state of the parameters for each bpf_loop call in a program and decides whether it could be replaced by a loop.

* A set of test cases for test_verifier that use capabilities added by the first two patches to verify instructions produced by inlining logic.

* Two test cases for test_prog to check that possible corner cases behave as expected.

Additional details are available in commit messages for each patch.

Changes since v4:
- Added missing static modifier for update_loop_inline_state and inline_bpf_loop functions.
- update_loop_inline_state updated for better readability.
- Fields initialized and fit_for_inline of struct bpf_loop_inline_state are changed back from bool to bitfields.
- Acks from Song Liu added to comments for patches 1/5, 2/5, 4/5, 5/5.

Changes since v3:
- Function adjust_stack_depth_for_loop_inlining is replaced by function optimize_bpf_loop. Function optimize_bpf_loop is responsible for both stack depth adjustment and call instruction replacement.
- Changes in do_misc_fixups are reverted.
- Changes in adjust_subprog_starts_after_remove are reverted and function adjust_loop_inline_subprogno is removed. This is possible because call to optimize_bpf_loop is placed before the dead code removal in opt_remove_dead_code (in contrast to the position of do_misc_fixups where inlining was done in v3).
- Field bpf_insn_aux_data.loop_inline_state is now a part of anonymous union at the start of the bpf_insn_aux_data.
- Data structure bpf_loop_inline_state is simplified to use single flag field fit_for_inline instead of separate fields flags_is_zero & callback_is_constant.
- Macro definition BPF_MAX_LOOPS is moved from include/linux/bpf_verifier.h to include/linux/bpf.h to avoid include of include/linux/bpf_verifier.h in bpf_iter.c.
- inline_bpf_loop changed back to use array initialization and hard coded offsets as in v2.
- Style / formatting updates.

Changes since v2:
- fix for stack_check test case in test_progs-no_alu32, all tests are passing now;
- v2 3/3 patch is split in three parts:
- kernel changes
- test_verifier changes
- test_prog changes
- updated inline_bpf_loop in verifier.c to calculate each offset used in instructions to avoid "magic" numbers;
- removed newline handling logic in fail_log branch of do_single_test in test_verifier.c to simplify the patch set;
- styling fixes suggested in review for v2 of this patch set.

Changes since v1:
- allow to use SKIP_INSNS in instruction pattern specification in test_verifier tests;
- fix for a bug in spill offset assignement for loop vars when bpf_loop is located in a non-main function.

Eduard Zingerman (5):
selftests/bpf: specify expected instructions in test_verifier tests selftests/bpf: allow BTF specs and func infos in test_verifier tests
bpf: Inline calls to bpf_loop when callback is known selftests/bpf: BPF test_verifier selftests for bpf_loop inlining selftests/bpf: BPF test_prog selftests for bpf_loop inlining

 include/linux/bpf.h                           |   3 +
 include/linux/bpf_verifier.h                  |  12 +
 kernel/bpf/bpf_iter.c                         |   9 +-
 kernel/bpf/verifier.c                         | 171 ++++++++-
 .../selftests/bpf/prog_tests/bpf_loop.c       |  62 ++++
 tools/testing/selftests/bpf/prog_tests/btf.c  |   1 -
 tools/testing/selftests/bpf/progs/bpf_loop.c  | 114 ++++++
 tools/testing/selftests/bpf/test_btf.h        |   2 +
 tools/testing/selftests/bpf/test_verifier.c   | 328 +++++++++++++++++-
 .../selftests/bpf/verifier/bpf_loop_inline.c  | 244 +++++++++++++
 10 files changed, 919 insertions(+), 27 deletions(-)
 create mode 100644 tools/testing/selftests/bpf/verifier/bpf_loop_inline.c
Signature · 1 line
2.25.1
author maintainer
#1 lore raw

PATCH v5 1/5 selftests/bpf: specify expected instructions in test_verifier tests

Allows to specify expected and unexpected instruction sequences in test_verifier test cases. The instructions are requested from kernel after BPF program loading, thus allowing to check some of the transformations applied by BPF verifier.

- expected_insn field specifies a sequence of instructions expected to be found in the program;
- unexpected_insn field specifies a sequence of instructions that are not expected to be found in the program;
- INSN_OFF_MASK and INSN_IMM_MASK values could be used to mask off and imm fields.
- SKIP_INSNS could be used to specify that some instructions in the (un)expected pattern are not important (behavior similar to usage of \t in errstr field).

The intended usage is as follows:

  {
	"inline simple bpf_loop call",
	.insns = {
	/* main */
	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2,
			BPF_PSEUDO_FUNC, 0, 6),
    ...
	BPF_EXIT_INSN(),
	/* callback */
	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
	BPF_EXIT_INSN(),
	},
	.expected_insns = {
	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
	SKIP_INSNS(),
	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, BPF_PSEUDO_CALL, 8, 1)
	},
	.unexpected_insns = {
	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0,
			INSN_OFF_MASK, INSN_IMM_MASK),
	},
	.prog_type = BPF_PROG_TYPE_TRACEPOINT,
	.result = ACCEPT,
	.runs = 0,

},

Here it is expected that move of 1 to register 1 would remain in place and helper function call instruction would be replaced by a relative call instruction.

Signed-off-by Eduard Zingerman <[email protected]>
Acked-by Song Liu <[email protected]>
---
 tools/testing/selftests/bpf/test_verifier.c | 234 ++++++++++++++++++++
 1 file changed, 234 insertions(+)
tools/testing/selftests/bpf/test_verifier.c +234 -0
index 372579c9f45e..1f24eae9e16e 100644
@@ -51,6 +51,8 @@
 #endif
 
 #define MAX_INSNS	BPF_MAXINSNS
+#define MAX_EXPECTED_INSNS	32
+#define MAX_UNEXPECTED_INSNS	32
 #define MAX_TEST_INSNS	1000000
 #define MAX_FIXUPS	8
 #define MAX_NR_MAPS	23

@@ -58,6 +60,10 @@
 #define POINTER_VALUE	0xcafe4all
 #define TEST_DATA_LEN	64
 
+#define INSN_OFF_MASK	((__s16)0xFFFF)
+#define INSN_IMM_MASK	((__s32)0xFFFFFFFF)
+#define SKIP_INSNS()	BPF_RAW_INSN(0xde, 0xa, 0xd, 0xbeef, 0xdeadbeef)
+
 #define F_NEEDS_EFFICIENT_UNALIGNED_ACCESS	(1 << 0)
 #define F_LOAD_WITH_STRICT_ALIGNMENT		(1 << 1)
 

@@ -79,6 +85,23 @@ struct bpf_test {
 	const char *descr;
 	struct bpf_insn	insns[MAX_INSNS];
 	struct bpf_insn	*fill_insns;
+	/* If specified, test engine looks for this sequence of
+	 * instructions in the BPF program after loading. Allows to
+	 * test rewrites applied by verifier.  Use values
+	 * INSN_OFF_MASK and INSN_IMM_MASK to mask `off` and `imm`
+	 * fields if content does not matter.  The test case fails if
+	 * specified instructions are not found.
+	 *
+	 * The sequence could be split into sub-sequences by adding
+	 * SKIP_INSNS instruction at the end of each sub-sequence. In
+	 * such case sub-sequences are searched for one after another.
+	 */
+	struct bpf_insn expected_insns[MAX_EXPECTED_INSNS];
+	/* If specified, test engine applies same pattern matching
+	 * logic as for `expected_insns`. If the specified pattern is
+	 * matched test case is marked as failed.
+	 */
+	struct bpf_insn unexpected_insns[MAX_UNEXPECTED_INSNS];
 	int fixup_map_hash_8b[MAX_FIXUPS];
 	int fixup_map_hash_48b[MAX_FIXUPS];
 	int fixup_map_hash_16b[MAX_FIXUPS];

@@ -1126,6 +1149,214 @@ static bool cmp_str_seq(const char *log, const char *exp)
 	return true;
 }
 
+static int get_xlated_program(int fd_prog, struct bpf_insn **buf, int *cnt)
+{
+	struct bpf_prog_info info = {};
+	__u32 info_len = sizeof(info);
+	__u32 xlated_prog_len;
+	__u32 buf_element_size = sizeof(struct bpf_insn);
+
+	if (bpf_obj_get_info_by_fd(fd_prog, &info, &info_len)) {
+		perror("bpf_obj_get_info_by_fd failed");
+		return -1;
+	}
+
+	xlated_prog_len = info.xlated_prog_len;
+	if (xlated_prog_len % buf_element_size) {
+		printf("Program length %d is not multiple of %d\n",
+		       xlated_prog_len, buf_element_size);
+		return -1;
+	}
+
+	*cnt = xlated_prog_len / buf_element_size;
+	*buf = calloc(*cnt, buf_element_size);
+	if (!buf) {
+		perror("can't allocate xlated program buffer");
+		return -ENOMEM;
+	}
+
+	bzero(&info, sizeof(info));
+	info.xlated_prog_len = xlated_prog_len;
+	info.xlated_prog_insns = (__u64)*buf;
+	if (bpf_obj_get_info_by_fd(fd_prog, &info, &info_len)) {
+		perror("second bpf_obj_get_info_by_fd failed");
+		goto out_free_buf;
+	}
+
+	return 0;
+
+out_free_buf:
+	free(*buf);
+	return -1;
+}
+
+static bool is_null_insn(struct bpf_insn *insn)
+{
+	struct bpf_insn null_insn = {};
+
+	return memcmp(insn, &null_insn, sizeof(null_insn)) == 0;
+}
+
+static bool is_skip_insn(struct bpf_insn *insn)
+{
+	struct bpf_insn skip_insn = SKIP_INSNS();
+
+	return memcmp(insn, &skip_insn, sizeof(skip_insn)) == 0;
+}
+
+static int null_terminated_insn_len(struct bpf_insn *seq, int max_len)
+{
+	int i;
+
+	for (i = 0; i < max_len; ++i) {
+		if (is_null_insn(&seq[i]))
+			return i;
+	}
+	return max_len;
+}
+
+static bool compare_masked_insn(struct bpf_insn *orig, struct bpf_insn *masked)
+{
+	struct bpf_insn orig_masked;
+
+	memcpy(&orig_masked, orig, sizeof(orig_masked));
+	if (masked->imm == INSN_IMM_MASK)
+		orig_masked.imm = INSN_IMM_MASK;
+	if (masked->off == INSN_OFF_MASK)
+		orig_masked.off = INSN_OFF_MASK;
+
+	return memcmp(&orig_masked, masked, sizeof(orig_masked)) == 0;
+}
+
+static int find_insn_subseq(struct bpf_insn *seq, struct bpf_insn *subseq,
+			    int seq_len, int subseq_len)
+{
+	int i, j;
+
+	if (subseq_len > seq_len)
+		return -1;
+
+	for (i = 0; i < seq_len - subseq_len + 1; ++i) {
+		bool found = true;
+
+		for (j = 0; j < subseq_len; ++j) {
+			if (!compare_masked_insn(&seq[i + j], &subseq[j])) {
+				found = false;
+				break;
+			}
+		}
+		if (found)
+			return i;
+	}
+
+	return -1;
+}
+
+static int find_skip_insn_marker(struct bpf_insn *seq, int len)
+{
+	int i;
+
+	for (i = 0; i < len; ++i)
+		if (is_skip_insn(&seq[i]))
+			return i;
+
+	return -1;
+}
+
+/* Return true if all sub-sequences in `subseqs` could be found in
+ * `seq` one after another. Sub-sequences are separated by a single
+ * nil instruction.
+ */
+static bool find_all_insn_subseqs(struct bpf_insn *seq, struct bpf_insn *subseqs,
+				  int seq_len, int max_subseqs_len)
+{
+	int subseqs_len = null_terminated_insn_len(subseqs, max_subseqs_len);
+
+	while (subseqs_len > 0) {
+		int skip_idx = find_skip_insn_marker(subseqs, subseqs_len);
+		int cur_subseq_len = skip_idx < 0 ? subseqs_len : skip_idx;
+		int subseq_idx = find_insn_subseq(seq, subseqs,
+						  seq_len, cur_subseq_len);
+
+		if (subseq_idx < 0)
+			return false;
+		seq += subseq_idx + cur_subseq_len;
+		seq_len -= subseq_idx + cur_subseq_len;
+		subseqs += cur_subseq_len + 1;
+		subseqs_len -= cur_subseq_len + 1;
+	}
+
+	return true;
+}
+
+static void print_insn(struct bpf_insn *buf, int cnt)
+{
+	int i;
+
+	printf("  addr  op d s off  imm\n");
+	for (i = 0; i < cnt; ++i) {
+		struct bpf_insn *insn = &buf[i];
+
+		if (is_null_insn(insn))
+			break;
+
+		if (is_skip_insn(insn))
+			printf("  ...\n");
+		else
+			printf("  %04x: %02x %1x %x %04hx %08x\n",
+			       i, insn->code, insn->dst_reg,
+			       insn->src_reg, insn->off, insn->imm);
+	}
+}
+
+static bool check_xlated_program(struct bpf_test *test, int fd_prog)
+{
+	struct bpf_insn *buf;
+	int cnt;
+	bool result = true;
+	bool check_expected = !is_null_insn(test->expected_insns);
+	bool check_unexpected = !is_null_insn(test->unexpected_insns);
+
+	if (!check_expected && !check_unexpected)
+		goto out;
+
+	if (get_xlated_program(fd_prog, &buf, &cnt)) {
+		printf("FAIL: can't get xlated program\n");
+		result = false;
+		goto out;
+	}
+
+	if (check_expected &&
+	    !find_all_insn_subseqs(buf, test->expected_insns,
+				   cnt, MAX_EXPECTED_INSNS)) {
+		printf("FAIL: can't find expected subsequence of instructions\n");
+		result = false;
+		if (verbose) {
+			printf("Program:\n");
+			print_insn(buf, cnt);
+			printf("Expected subsequence:\n");
+			print_insn(test->expected_insns, MAX_EXPECTED_INSNS);
+		}
+	}
+
+	if (check_unexpected &&
+	    find_all_insn_subseqs(buf, test->unexpected_insns,
+				  cnt, MAX_UNEXPECTED_INSNS)) {
+		printf("FAIL: found unexpected subsequence of instructions\n");
+		result = false;
+		if (verbose) {
+			printf("Program:\n");
+			print_insn(buf, cnt);
+			printf("Un-expected subsequence:\n");
+			print_insn(test->unexpected_insns, MAX_UNEXPECTED_INSNS);
+		}
+	}
+
+	free(buf);
+ out:
+	return result;
+}
+
 static void do_test_single(struct bpf_test *test, bool unpriv,
 			   int *passes, int *errors)
 {

@@ -1262,6 +1493,9 @@ static void do_test_single(struct bpf_test *test, bool unpriv,
 	if (verbose)
 		printf(", verifier log:\n%s", bpf_vlog);
 
+	if (!check_xlated_program(test, fd_prog))
+		goto fail_log;
+
 	run_errs = 0;
 	run_successes = 0;
 	if (!alignment_prevented_execution && fd_prog >= 0 && test->runs >= 0) {
Signature · 1 line
2.25.1
author maintainer
#2 lore raw

PATCH v5 2/5 selftests/bpf: allow BTF specs and func infos in test_verifier tests

In reply to Eduard Zingerman

The BTF and func_info specification for test_verifier tests follows the same notation as in prog_tests/btf.c tests. E.g.:

...
.func_info = { { 0, 6 }, { 8, 7 } },
.func_info_cnt = 2,
.btf_strings = "\0int\0",

  .btf_types = {
    BTF_TYPE_INT_ENC(1, BTF_INT_SIGNED, 0, 32, 4),
    BTF_PTR_ENC(1),

},
...

The BTF specification is loaded only when specified.

Signed-off-by Eduard Zingerman <[email protected]>
Acked-by Song Liu <[email protected]>
---
 tools/testing/selftests/bpf/prog_tests/btf.c |  1 -
 tools/testing/selftests/bpf/test_btf.h       |  2 +
 tools/testing/selftests/bpf/test_verifier.c  | 94 ++++++++++++++++----
 3 files changed, 79 insertions(+), 18 deletions(-)
tools/testing/selftests/bpf/prog_tests/btf.c +0 -1
index edb387163baa..1fd792a92a1c 100644
@@ -34,7 +34,6 @@ static bool always_log;
 #undef CHECK
 #define CHECK(condition, format...) _CHECK(condition, "check", duration, format)
 
-#define BTF_END_RAW 0xdeadbeef
 #define NAME_TBD 0xdeadb33f
 
 #define NAME_NTH(N) (0xfffe0000 | N)
tools/testing/selftests/bpf/test_btf.h +2 -0
index 38782bd47fdc..fb4f4714eeb4 100644
@@ -4,6 +4,8 @@
 #ifndef _TEST_BTF_H
 #define _TEST_BTF_H
 
+#define BTF_END_RAW 0xdeadbeef
+
 #define BTF_INFO_ENC(kind, kind_flag, vlen)			\
 	((!!(kind_flag) << 31) | ((kind) << 24) | ((vlen) & BTF_MAX_VLEN))
tools/testing/selftests/bpf/test_verifier.c +77 -17

174 lines not on this page · raw message

Signature · 1 line
2.25.1
author maintainer
#3 lore raw

PATCH v5 3/5 bpf: Inline calls to bpf_loop when callback is known

In reply to Eduard Zingerman

Calls to bpf_loop are replaced with direct loops to avoid indirection. E.g. the following:

  bpf_loop(10, foo, NULL, 0);

Is replaced by equivalent of the following:

  for (int i = 0; i < 10; ++i)
    foo(i, NULL);

This transformation could be applied when:
- callback is known and does not change during program execution;
- flags passed to bpf_loop are always zero.

Inlining logic works as follows:

- During execution simulation function update_loop_inline_state tracks the following information for each bpf_loop call instruction:
- is callback known and constant?
- are flags constant and zero?
- Function optimize_bpf_loop increases stack depth for functions where bpf_loop calls can be inlined and invokes inline_bpf_loop to apply the inlining. The additional stack space is used to spill registers R6, R7 and R8. These registers are used as loop counter, loop maximal bound and callback context parameter;

Measurements using benchs/run_bench_bpf_loop.sh inside QEMU / KVM on i7-4710HQ CPU show a drop in latency from 14 ns/op to 2 ns/op.

Signed-off-by Eduard Zingerman <[email protected]>
---
 include/linux/bpf.h          |   3 +
 include/linux/bpf_verifier.h |  12 +++
 kernel/bpf/bpf_iter.c        |   9 +-
 kernel/bpf/verifier.c        | 171 ++++++++++++++++++++++++++++++++++-
 4 files changed, 186 insertions(+), 9 deletions(-)
include/linux/bpf.h +3 -0
index 8e6092d0ea95..3c75ede138b5 100644
@@ -1236,6 +1236,9 @@ struct bpf_array {
 #define BPF_COMPLEXITY_LIMIT_INSNS      1000000 /* yes. 1M insns */
 #define MAX_TAIL_CALL_CNT 33
 
+/* Maximum number of loops for bpf_loop */
+#define BPF_MAX_LOOPS	BIT(23)
+
 #define BPF_F_ACCESS_MASK	(BPF_F_RDONLY |		\
 				 BPF_F_RDONLY_PROG |	\
 				 BPF_F_WRONLY |		\
include/linux/bpf_verifier.h +12 -0
index e8439f6cbe57..5cf152b0a53e 100644
@@ -344,6 +344,14 @@ struct bpf_verifier_state_list {
 	int miss_cnt, hit_cnt;
 };
 
+struct bpf_loop_inline_state {
+	int initialized:1; /* set to true upon first entry */
+	int fit_for_inline:1; /* true if callback function is the same
+			       * at each call and flags are always zero
+			       */
+	u32 callback_subprogno; /* valid when fit_for_inline is true */
+};
+
 /* Possible states for alu_state member. */
 #define BPF_ALU_SANITIZE_SRC		(1U << 0)
 #define BPF_ALU_SANITIZE_DST		(1U << 1)

@@ -373,6 +381,10 @@ struct bpf_insn_aux_data {
 				u32 mem_size;	/* mem_size for non-struct typed var */
 			};
 		} btf_var;
+		/* if instruction is a call to bpf_loop this field tracks
+		 * the state of the relevant registers to make decision about inlining
+		 */
+		struct bpf_loop_inline_state loop_inline_state;
 	};
 	u64 map_key_state; /* constant (32 bit) key tracking for maps */
 	int ctx_field_size; /* the ctx field size for load insn, maybe 0 */
kernel/bpf/bpf_iter.c +5 -4
index d5d96ceca105..7e8fd49406f6 100644
@@ -723,9 +723,6 @@ const struct bpf_func_proto bpf_for_each_map_elem_proto = {
 	.arg4_type	= ARG_ANYTHING,
 };
 
-/* maximum number of loops */
-#define MAX_LOOPS	BIT(23)
-
 BPF_CALL_4(bpf_loop, u32, nr_loops, void *, callback_fn, void *, callback_ctx,
 	   u64, flags)
 {

@@ -733,9 +730,13 @@ BPF_CALL_4(bpf_loop, u32, nr_loops, void *, callback_fn, void *, callback_ctx,
 	u64 ret;
 	u32 i;
 
+	/* Note: these safety checks are also verified when bpf_loop
+	 * is inlined, be careful to modify this code in sync. See
+	 * function verifier.c:inline_bpf_loop.
+	 */
 	if (flags)
 		return -EINVAL;
-	if (nr_loops > MAX_LOOPS)
+	if (nr_loops > BPF_MAX_LOOPS)
 		return -E2BIG;
 
 	for (i = 0; i < nr_loops; i++) {
kernel/bpf/verifier.c +166 -5

201 lines not on this page · raw message

Signature · 1 line
2.25.1
reviewer
#4 lore raw

Re: [PATCH bpf-next v5 3/5] bpf: Inline calls to bpf_loop when callback is known

Quoted 1 line · Eduard Zingerman

[...]

Quoted 2 lines
Signed-off-by Eduard Zingerman <[email protected]>

---

[...]

kernel/bpf/verifier.c static int check_get_func_ip(struct bpf_verifier_env *env) · line 7117

Quoted 13 lines
kernel/bpf/verifier.c +12 -0
+static struct bpf_insn_aux_data *cur_aux(struct bpf_verifier_env *env)
+{
+       return &env->insn_aux_data[env->insn_idx];
+}
+
+static void update_loop_inline_state(struct bpf_verifier_env *env, u32 subprogno)
+{
+       struct bpf_loop_inline_state *state = &cur_aux(env)->loop_inline_state;
+       struct bpf_reg_state *regs = cur_regs(env);
+       struct bpf_reg_state *flags_reg = &regs[BPF_REG_4];
+       int flags_is_zero =
+               register_is_const(flags_reg) && flags_reg->var_off.value == 0;

How about we add helper

static bool flag_is_zero(struct bpf_verifier_env *env, int regno)

{
        struct bpf_loop_inline_state *state = &cur_aux(env)->loop_inline_state;
        struct bpf_reg_state *regs = cur_regs(env);
        struct bpf_reg_state *flags_reg = &regs[regno];

        return register_is_const(flags_reg) && flags_reg->var_off.value == 0;
}

and ...

kernel/bpf/verifier.c static int check_get_func_ip(struct bpf_verifier_env *env) · line 7121

Quoted 4 lines
kernel/bpf/verifier.c +4 -0
+
+       if (!state->initialized) {
+               state->initialized = 1;
+               state->fit_for_inline = flags_is_zero;

       state->fit_for_inline = flag_is_zero(env, BPF_REG_4);

and ...

kernel/bpf/verifier.c static int check_get_func_ip(struct bpf_verifier_env *env) · line 7130

Quoted 9 lines
kernel/bpf/verifier.c +9 -0
+               state->callback_subprogno = subprogno;
+               return;
+       }
+
+       if (!state->fit_for_inline)
+               return;
+
+       state->fit_for_inline =
+               flags_is_zero &&

flag_is_zero(env, BPF_REG_4);

This would avoid calculating flag_is_zero for !state->fix_for_inline case.

Quoted 4 lines
kernel/bpf/verifier.c +3 -0
+               state->callback_subprogno == subprogno;
+}
+
 static int check_helper_call(struct bpf_verifier_env *env, struct bpf_insn *insn,

[...]

kernel/bpf/verifier.c int bpf_check(struct bpf_prog **prog, union bpf_attr *attr, bpfptr_t uattr) · line 15194

Quoted 11 lines

static void free_states(struct bpf_verifier_env *env)

 {
        struct bpf_verifier_state_list *sl, *sln;
kernel/bpf/verifier.c +3 -0
@@ -15030,6 +15188,9 @@ int bpf_check(struct bpf_prog **prog, union bpf_attr *attr, bpfptr_t uattr)
        if (ret == 0)
                ret = check_max_stack_depth(env);
 
+       if (ret == 0)
+               optimize_bpf_loop(env);
+
        /* instruction rewrites happen after this point */

nit: I guess optimize_bpf_loop() is part of "instruction rewrite", so this comment
should be above optimize_bpf_loop()?

Quoted 5 lines
kernel/bpf/verifier.c +0 -1
        if (is_priv) {
                if (ret == 0)
--

2.25.1

author maintainer
#5 lore raw

PATCH v5 4/5 selftests/bpf: BPF test_verifier selftests for bpf_loop inlining

In reply to Eduard Zingerman

A number of test cases for BPF selftests test_verifier to check how bpf_loop inline transformation rewrites the BPF program. The following cases are covered:
- happy path
- no-rewrite when flags is non-zero
- no-rewrite when callback is non-constant
- subprogno in insn_aux is updated correctly when dead sub-programs are removed
- check that correct stack offsets are assigned for spilling of R6-R8 registers

Signed-off-by Eduard Zingerman <[email protected]>
Acked-by Song Liu <[email protected]>
---
 .../selftests/bpf/verifier/bpf_loop_inline.c  | 244 ++++++++++++++++++
 1 file changed, 244 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/verifier/bpf_loop_inline.c
tools/testing/selftests/bpf/verifier/bpf_loop_inline.c new file +244 -0
new file mode 100644
index 000000000000..d1fbcfef69f2
@@ -0,0 +1,244 @@
+#define BTF_TYPES \
+	.btf_strings = "\0int\0i\0ctx\0callback\0main\0", \
+	.btf_types = { \
+	/* 1: int   */ BTF_TYPE_INT_ENC(1, BTF_INT_SIGNED, 0, 32, 4), \
+	/* 2: int*  */ BTF_PTR_ENC(1), \
+	/* 3: void* */ BTF_PTR_ENC(0), \
+	/* 4: int __(void*) */ BTF_FUNC_PROTO_ENC(1, 1), \
+		BTF_FUNC_PROTO_ARG_ENC(7, 3), \
+	/* 5: int __(int, int*) */ BTF_FUNC_PROTO_ENC(1, 2), \
+		BTF_FUNC_PROTO_ARG_ENC(5, 1), \
+		BTF_FUNC_PROTO_ARG_ENC(7, 2), \
+	/* 6: main      */ BTF_FUNC_ENC(20, 4), \
+	/* 7: callback  */ BTF_FUNC_ENC(11, 5), \
+	BTF_END_RAW \
+	}
+
+#define MAIN_TYPE	6
+#define CALLBACK_TYPE	7
+
+/* can't use BPF_CALL_REL, jit_subprogs adjusts IMM & OFF
+ * fields for pseudo calls
+ */
+#define PSEUDO_CALL_INSN() \
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, BPF_PSEUDO_CALL, \
+		     INSN_OFF_MASK, INSN_IMM_MASK)
+
+/* can't use BPF_FUNC_loop constant,
+ * do_mix_fixups adjusts the IMM field
+ */
+#define HELPER_CALL_INSN() \
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, INSN_OFF_MASK, INSN_IMM_MASK)
+
+{
+	"inline simple bpf_loop call",
+	.insns = {
+	/* main */
+	/* force verifier state branching to verify logic on first and
+	 * subsequent bpf_loop insn processing steps
+	 */
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_jiffies64),
+	BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 777, 2),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
+	BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 2),
+
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 6),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_3, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_loop),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 0),
+	BPF_EXIT_INSN(),
+	/* callback */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
+	BPF_EXIT_INSN(),
+	},
+	.expected_insns = { PSEUDO_CALL_INSN() },
+	.unexpected_insns = { HELPER_CALL_INSN() },
+	.prog_type = BPF_PROG_TYPE_TRACEPOINT,
+	.result = ACCEPT,
+	.runs = 0,
+	.func_info = { { 0, MAIN_TYPE }, { 12, CALLBACK_TYPE } },
+	.func_info_cnt = 2,
+	BTF_TYPES
+},
+{
+	"don't inline bpf_loop call, flags non-zero",
+	.insns = {
+	/* main */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 6),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_3, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 1),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_loop),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 0),
+	BPF_EXIT_INSN(),
+	/* callback */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
+	BPF_EXIT_INSN(),
+	},
+	.expected_insns = { HELPER_CALL_INSN() },
+	.unexpected_insns = { PSEUDO_CALL_INSN() },
+	.prog_type = BPF_PROG_TYPE_TRACEPOINT,
+	.result = ACCEPT,
+	.runs = 0,
+	.func_info = { { 0, MAIN_TYPE }, { 8, CALLBACK_TYPE } },
+	.func_info_cnt = 2,
+	BTF_TYPES
+},
+{
+	"don't inline bpf_loop call, callback non-constant",
+	.insns = {
+	/* main */
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_jiffies64),
+	BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 777, 4), /* pick a random callback */
+
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 10),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_JMP_IMM(BPF_JA, 0, 0, 3),
+
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 8),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_3, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_loop),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 0),
+	BPF_EXIT_INSN(),
+	/* callback */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
+	BPF_EXIT_INSN(),
+	/* callback #2 */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
+	BPF_EXIT_INSN(),
+	},
+	.expected_insns = { HELPER_CALL_INSN() },
+	.unexpected_insns = { PSEUDO_CALL_INSN() },
+	.prog_type = BPF_PROG_TYPE_TRACEPOINT,
+	.result = ACCEPT,
+	.runs = 0,
+	.func_info = {
+		{ 0, MAIN_TYPE },
+		{ 14, CALLBACK_TYPE },
+		{ 16, CALLBACK_TYPE }
+	},
+	.func_info_cnt = 3,
+	BTF_TYPES
+},
+{
+	"bpf_loop_inline and a dead func",
+	.insns = {
+	/* main */
+
+	/* A reference to callback #1 to make verifier count it as a func.
+	 * This reference is overwritten below and callback #1 is dead.
+	 */
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 9),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 8),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_3, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_loop),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 0),
+	BPF_EXIT_INSN(),
+	/* callback */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
+	BPF_EXIT_INSN(),
+	/* callback #2 */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
+	BPF_EXIT_INSN(),
+	},
+	.expected_insns = { PSEUDO_CALL_INSN() },
+	.unexpected_insns = { HELPER_CALL_INSN() },
+	.prog_type = BPF_PROG_TYPE_TRACEPOINT,
+	.result = ACCEPT,
+	.runs = 0,
+	.func_info = {
+		{ 0, MAIN_TYPE },
+		{ 10, CALLBACK_TYPE },
+		{ 12, CALLBACK_TYPE }
+	},
+	.func_info_cnt = 3,
+	BTF_TYPES
+},
+{
+	"bpf_loop_inline stack locations for loop vars",
+	.insns = {
+	/* main */
+	BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, 0x77),
+	/* bpf_loop call #1 */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 1),
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 22),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_3, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_loop),
+	/* bpf_loop call #2 */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 2),
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 16),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_3, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_loop),
+	/* call func and exit */
+	BPF_CALL_REL(2),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 0),
+	BPF_EXIT_INSN(),
+	/* func */
+	BPF_ST_MEM(BPF_DW, BPF_REG_10, -32, 0x55),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_1, 2),
+	BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, BPF_REG_2, BPF_PSEUDO_FUNC, 0, 6),
+	BPF_RAW_INSN(0, 0, 0, 0, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_3, 0),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_4, 0),
+	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_loop),
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 0),
+	BPF_EXIT_INSN(),
+	/* callback */
+	BPF_ALU64_IMM(BPF_MOV, BPF_REG_0, 1),
+	BPF_EXIT_INSN(),
+	},
+	.expected_insns = {
+	BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, 0x77),
+	SKIP_INSNS(),
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_6, -40),
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_7, -32),
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_8, -24),
+	SKIP_INSNS(),
+	/* offsets are the same as in the first call */
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_6, -40),
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_7, -32),
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_8, -24),
+	SKIP_INSNS(),
+	BPF_ST_MEM(BPF_DW, BPF_REG_10, -32, 0x55),
+	SKIP_INSNS(),
+	/* offsets differ from main because of different offset
+	 * in BPF_ST_MEM instruction
+	 */
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_6, -56),
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_7, -48),
+	BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_8, -40),
+	},
+	.unexpected_insns = { HELPER_CALL_INSN() },
+	.prog_type = BPF_PROG_TYPE_TRACEPOINT,
+	.result = ACCEPT,
+	.func_info = {
+		{ 0, MAIN_TYPE },
+		{ 16, MAIN_TYPE },
+		{ 25, CALLBACK_TYPE },
+	},
+	.func_info_cnt = 3,
+	BTF_TYPES
+},
+
+#undef HELPER_CALL_INSN
+#undef PSEUDO_CALL_INSN
+#undef CALLBACK_TYPE
+#undef MAIN_TYPE
+#undef BTF_TYPES
Signature · 1 line
2.25.1
author maintainer
#6 lore raw

PATCH v5 5/5 selftests/bpf: BPF test_prog selftests for bpf_loop inlining

In reply to Eduard Zingerman

Two new test BPF programs for test_prog selftests checking bpf_loop behavior. Both are corner cases for bpf_loop inlinig transformation:
- check that bpf_loop behaves correctly when callback function is not a compile time constant
- check that local function variables are not affected by allocating additional stack storage for registers spilled by loop inlining

Signed-off-by Eduard Zingerman <[email protected]>
Acked-by Song Liu <[email protected]>
---
 .../selftests/bpf/prog_tests/bpf_loop.c       |  62 ++++++++++
 tools/testing/selftests/bpf/progs/bpf_loop.c  | 114 ++++++++++++++++++
 2 files changed, 176 insertions(+)
tools/testing/selftests/bpf/prog_tests/bpf_loop.c +62 -0
index 380d7a2072e3..4cd8a25afe68 100644
@@ -120,6 +120,64 @@ static void check_nested_calls(struct bpf_loop *skel)
 	bpf_link__destroy(link);
 }
 
+static void check_non_constant_callback(struct bpf_loop *skel)
+{
+	struct bpf_link *link =
+		bpf_program__attach(skel->progs.prog_non_constant_callback);
+
+	if (!ASSERT_OK_PTR(link, "link"))
+		return;
+
+	skel->bss->callback_selector = 0x0F;
+	usleep(1);
+	ASSERT_EQ(skel->bss->g_output, 0x0F, "g_output #1");
+
+	skel->bss->callback_selector = 0xF0;
+	usleep(1);
+	ASSERT_EQ(skel->bss->g_output, 0xF0, "g_output #2");
+
+	bpf_link__destroy(link);
+}
+
+static void check_stack(struct bpf_loop *skel)
+{
+	struct bpf_link *link = bpf_program__attach(skel->progs.stack_check);
+	const int max_key = 12;
+	int key;
+	int map_fd;
+
+	if (!ASSERT_OK_PTR(link, "link"))
+		return;
+
+	map_fd = bpf_map__fd(skel->maps.map1);
+
+	if (!ASSERT_GE(map_fd, 0, "bpf_map__fd"))
+		goto out;
+
+	for (key = 1; key <= max_key; ++key) {
+		int val = key;
+		int err = bpf_map_update_elem(map_fd, &key, &val, BPF_NOEXIST);
+
+		if (!ASSERT_OK(err, "bpf_map_update_elem"))
+			goto out;
+	}
+
+	usleep(1);
+
+	for (key = 1; key <= max_key; ++key) {
+		int val;
+		int err = bpf_map_lookup_elem(map_fd, &key, &val);
+
+		if (!ASSERT_OK(err, "bpf_map_lookup_elem"))
+			goto out;
+		if (!ASSERT_EQ(val, key + 1, "bad value in the map"))
+			goto out;
+	}
+
+out:
+	bpf_link__destroy(link);
+}
+
 void test_bpf_loop(void)
 {
 	struct bpf_loop *skel;

@@ -140,6 +198,10 @@ void test_bpf_loop(void)
 		check_invalid_flags(skel);
 	if (test__start_subtest("check_nested_calls"))
 		check_nested_calls(skel);
+	if (test__start_subtest("check_non_constant_callback"))
+		check_non_constant_callback(skel);
+	if (test__start_subtest("check_stack"))
+		check_stack(skel);
 
 	bpf_loop__destroy(skel);
 }
tools/testing/selftests/bpf/progs/bpf_loop.c +114 -0

128 lines not on this page · raw message

Signature · 1 line
2.25.1