pinctrl: imx: Add the zero base flag for imx93
Subsystems (4)
Jacky Bai
maintainerPATCH 1/1 pinctrl: imx: Add the zero base flag for imx93
On i.MX93, the pin mux reg offset is from 0x0, so need to add the 'ZERO_OFFSET_VALID' flag to make sure the pin at mux offset 0 can be found.
--- drivers/pinctrl/freescale/pinctrl-imx93.c | 1 + 1 file changed, 1 insertion(+)
drivers/pinctrl/freescale/pinctrl-imx93.c +1 -0
@@ -239,6 +239,7 @@ static const struct pinctrl_pin_desc imx93_pinctrl_pads[] = {static const struct imx_pinctrl_soc_info imx93_pinctrl_info = { .pins = imx93_pinctrl_pads, .npins =ARRAY_SIZE (imx93_pinctrl_pads), + .flags =ZERO_OFFSET_VALID , .gpr_compatible ="fsl,imx93-iomuxc-gpr" , };
Signature · 1 line
2.25.1
Jacky Bai
maintainerPing...
BR
Quoted 25 lines
Subject: [PATCH] pinctrl: imx: Add the zero base flag for imx93
On i.MX93, the pin mux reg offset is from
0x0, so need to add the 'ZERO_OFFSET_VALID' flag to make sure the pin at mux offset 0 can be found.Signed-off-by Jacky Bai <[email protected]>--- drivers/pinctrl/freescale/pinctrl-imx93.c | 1 + 1 file changed, 1 insertion(+)drivers/pinctrl/freescale/pinctrl-imx93.c +0
-0@@ -239,6 +239,7 @@ static const struct pinctrl_pin_descimx93_pinctrl_pads[] = { static const struct
imx_pinctrl_soc_infoimx93_pinctrl_info= {drivers/pinctrl/freescale/pinctrl-imx93.c +1
-1.pins = imx93_pinctrl_pads, .npins = ARRAY_SIZE(imx93_pinctrl_pads), + .flags = ZERO_OFFSET_VALID, .gpr_compatible = "fsl,imx93-iomuxc-gpr", }; --2.25.1
Quoted 5 lines · Jacky Bai
On i.MX93, the pin mux reg offset is from
0x0, so need to add the 'ZERO_OFFSET_VALID' flag to make sure the pin at mux offset 0 can be found.Signed-off-by Jacky Bai <[email protected]>
No reply from maintainers for an urgent fix for two weeks -> patch applied.
Jacky, maybe you should be listed as comaintainer for the freescale pin controller if you are doing active maintenance on it?
Yours,
Linus Walleij
Jacky Bai
maintainerQuoted 8 lines
Subject: Re: [PATCH] pinctrl: imx: Add the zero base flag for imx93
Quoted 4 lines · Jacky Bai
On i.MX93, the pin mux reg offset is from
0x0, so need to add the 'ZERO_OFFSET_VALID' flag to make sure the pin at mux offset 0 can be found.
Quoted 7 lines
Quoted 1 line
Signed-off-by Jacky Bai <[email protected]>No reply from maintainers for an urgent fix for two weeks -> patch applied.
Jacky, maybe you should be listed as comaintainer for the freescale pin controller if you are doing active maintenance on it?
Yes, I can help on this.
BR
Quoted 2 lines
Yours,
Linus Walleij
Quoted 7 lines · Jacky Bai
Quoted 7 lines
Subject: Re: [PATCH] pinctrl: imx: Add the zero base flag for imx93
Quoted 4 lines · Jacky Bai
On i.MX93, the pin mux reg offset is from
0x0, so need to add the 'ZERO_OFFSET_VALID' flag to make sure the pin at mux offset 0 can be found.
Quoted 8 lines
Quoted 6 lines
Quoted 1 line
Signed-off-by Jacky Bai <[email protected]>No reply from maintainers for an urgent fix for two weeks -> patch applied.
Jacky, maybe you should be listed as comaintainer for the freescale pin controller if you are doing active maintenance on it?
Yes, I can help on this.
Please send a patch to MAINATINERS adding yourself as maintainer and CC the other maintainers listed there.
Maybe you have some internal NXP mail list and procedure to follow too, no idea :D discuss amongs yourselves if necessary, but I really like active maintainers.
Thanks!
Linus Walleij