arm64: dts: imx8m: Pass a label to the soc node
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/2 arm64: dts: imx8m: Pass a label to the soc node
Pass a label to the 'soc' node to make it easier to reference it from other devicetree files.
U-Boot, for example usually needs to access the AIPS node to pass U-Boot-specific properties.
--- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-)
arch/arm64/boot/dts/freescale/imx8mm.dtsi +1 -1
@@ -287,7 +287,7 @@ usbphynop2: usbphynop2 { clock-names = "main_clk"; }; - soc@0 { + soc: soc@0 { compatible = "fsl,imx8mm-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>;
arch/arm64/boot/dts/freescale/imx8mn.dtsi +1 -1
@@ -269,7 +269,7 @@ timer { arm,no-tick-in-suspend; }; - soc@0 { + soc: soc@0 { compatible = "fsl,imx8mn-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>;
arch/arm64/boot/dts/freescale/imx8mp.dtsi +1 -1
@@ -293,7 +293,7 @@ timer { arm,no-tick-in-suspend; }; - soc@0 { + soc: soc@0 { compatible = "fsl,imx8mp-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>;
arch/arm64/boot/dts/freescale/imx8mq.dtsi +1 -1
@@ -320,7 +320,7 @@ timer { arm,no-tick-in-suspend; }; - soc@0 { + soc: soc@0 { compatible = "fsl,imx8mq-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>;
arch/arm64/boot/dts/freescale/imx8ulp.dtsi +1 -1
@@ -137,7 +137,7 @@ scmi_sensor: protocol@15 { }; }; - soc@0 { + soc: soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Fabio Estevam
reviewerPATCH 2/2 arm64: dts: imx8mq: Pass a label to the AIPS nodes
From: Fabio Estevam <[email protected]>
Pass a label to the AIPS nodes to make it easier to reference it from other devicetree files.
The other i.MX8M dtsi files already describe labels for the AIPS nodes.
Make it available for imx8mq for consistency.
U-Boot, for example usually needs to access the AIPS node to pass U-Boot-specific properties.
--- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/freescale/imx8mq.dtsi +4 -4
@@ -329,7 +329,7 @@ soc: soc@0 { nvmem-cells = <&imx8mq_uid>; nvmem-cell-names = "soc_unique_id"; - bus@30000000 { /* AIPS1 */ + aips1: bus@30000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30000000 0x400000>; #address-cells = <1>;
@@ -784,7 +784,7 @@ pgc_pcie2: power-domain@a { }; }; - bus@30400000 { /* AIPS2 */ + aips2: bus@30400000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30400000 0x400000>; #address-cells = <1>;
@@ -844,7 +844,7 @@ system_counter: timer@306a0000 { }; }; - bus@30800000 { /* AIPS3 */ + aips3: bus@30800000 { /* AIPS3 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30800000 0x400000>; #address-cells = <1>;
@@ -1369,7 +1369,7 @@ opp-800M { }; }; - bus@32c00000 { /* AIPS4 */ + aips4: bus@32c00000 { /* AIPS4 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; #address-cells = <1>;
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 7 lines · Fabio Estevam
Pass a label to the 'soc' node to make it easier to reference it from other devicetree files.
U-Boot, for example usually needs to access the AIPS node to pass U-Boot-specific properties.
Signed-off-by Fabio Estevam <[email protected]>
Applied both, thanks!
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel