Skip to contentSkip to conversation

verdin-imx8mm, verdin-imx8mp: Fix default systemd console output

PATCH New Marcel Ziswiler 2 participants 2 messages May 25, 2022 – Jun 15, 2022 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 verdin-imx8mm, verdin-imx8mp: Fix default systemd console output

From: Philippe Schenker <[email protected]>

systemd prints its messages on the last console= statement that it finds in the kernel arguments. The current ordering sends the systemd messages to tty1, by default this is the display.

Ensure that systemd sends its messages to the default UART, reorder the console= statements accordingly.

---

Changes in v2:
- Added Stefano's reviewed-by tag.
- Added my acked-by tag.
- Re-based on top of Stefano's master-next.

 include/configs/verdin-imx8mm.h | 4 ++--
 include/configs/verdin-imx8mp.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
include/configs/verdin-imx8mm.h +2 -2
index cd950ad055e..558b78115df 100644
@@ -58,8 +58,8 @@
 	"fdt_board=dev\0" \
 	"initrd_addr=0x43800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
-	"setup=setenv setupargs console=${console},${baudrate} " \
-		"console=tty1 consoleblank=0 earlycon\0" \
+	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
+		"consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
 		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
include/configs/verdin-imx8mp.h +1 -1
index 470f64d5a74..52fa2be3ab1 100644
@@ -75,7 +75,7 @@
 	"fdt_board=dev\0" \
 	"initrd_addr=0x43800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
-	"setup=setenv setupargs console=${console},${baudrate} console=tty1 " \
+	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
 		"consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
Signature · 1 line
2.35.1
#1 lore raw

PATCH v2 1/1 verdin-imx8mm, verdin-imx8mp: Fix default systemd console output

Quoted 10 lines

From: Philippe Schenker <[email protected]> systemd prints its messages on the last console= statement that it finds in the kernel arguments. The current ordering sends the systemd messages to tty1, by default this is the display.
Ensure that systemd sends its messages to the default UART, reorder the console= statements accordingly.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================