Skip to contentSkip to conversation

nvme: Report model,sn,fw,pci device information during init

PATCH In review Erwan Velu 2 participants 3 messages Jun 15, 2022 NVMe

lore
Share & tools
lore

Erwan Velu

author
#0 lore raw

PATCH 1/1 nvme: Report model,sn,fw,pci device information during init

SCSI-based device get their identify properties being printed when initialized like :

[    1.245357] scsi 0:0:0:0: Direct-Access     ATA      HGST HTE721010A9 A3M0 PQ: 0 ANSI: 5

When initializing nvme devices, no identification message is reported making difficult to identify them during the boot process. If the system crashes during boot process or if the init phase fail, it could be very diffcult to identify the faulty disk.

This patch reports model, serial, firmware version and pci information as soon as possible making this early identifying task possible.

Reporting the serial has the interest of being able to ensure which physical drive is concerned if a hardware replacement is required and host features the exact same drive multiple times.

A typical output looks like:

[    0.383353] nvme nvme0: pci function 0000:00:03.0
[    0.418184] nvme nvme0: MODEL:QEMU NVMe Ctrl                          SN:deadbeef            FW:1.0     PCI_ID:1b36:1af4
[    0.422020] nvme nvme0: 1/0/0 default/read/poll queues
---
 drivers/nvme/host/core.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/nvme/host/core.c +8 -0
index 24165daee3c8..0922b7a470b1 100644
@@ -2987,6 +2987,14 @@ static int nvme_init_identify(struct nvme_ctrl *ctrl)
 	if (!ctrl->identified) {
 		unsigned int i;
 
+		/* Reporting model, serial, firmware and pci info */
+		dev_info(ctrl->device, "MODEL:%.*s SN:%.*s FW:%.*s PCI_ID:%04x:%04x\n",
+				(int)sizeof(id->mn), id->mn,
+				(int)sizeof(id->sn),id->sn,
+				(int)sizeof(id->fr), id->fr,
+				le16_to_cpu(id->vid),
+				le16_to_cpu(id->ssvid));
+
 		ret = nvme_init_subsystem(ctrl, id);
 		if (ret)
 			goto out_free;
Signature · 1 line
2.35.3
maintainer
#1 lore raw
Quoted 12 lines · Erwan Velu

SCSI-based device get their identify properties being printed when initialized like :

[    1.245357] scsi 0:0:0:0: Direct-Access     ATA      HGST HTE721010A9 A3M0 PQ: 0 ANSI: 5

When initializing nvme devices, no identification message is reported making difficult to identify them during the boot process. If the system crashes during boot process or if the init phase fail, it could be very diffcult to identify the faulty disk.

This patch reports model, serial, firmware version and pci information as soon as possible making this early identifying task possible.

Quoted 8 lines

Reporting the serial has the interest of being able to ensure which physical drive is concerned if a hardware replacement is required and host features the exact same drive multiple times.

A typical output looks like:

[    0.383353] nvme nvme0: pci function 0000:00:03.0
[    0.418184] nvme nvme0: MODEL:QEMU NVMe Ctrl                          SN:deadbeef            FW:1.0     PCI_ID:1b36:1af4
[    0.422020] nvme nvme0: 1/0/0 default/read/poll queues

The PCI_ID: print is misleading. That format usually indicates VID:DID, but you're printing VID:SSVID.

This is also very similar to the recently introduced nvme_print_device_info(), but that one removes the annoying trailing spaces if they exist. I guess if we're going this direction, just use that print, but change it from dev_err to dev_info, and remove the call on global id collision detection.

author
#2 lore raw

[...]

Quoted 2 lines

The PCI_ID: print is misleading. That format usually indicates VID:DID, but you're printing VID:SSVID.

True.

Quoted 4 lines

This is also very similar to the recently introduced nvme_print_device_info(), but that one removes the annoying trailing spaces if they exist. I guess if we're going this direction, just use that print, but change it from dev_err to dev_info, and remove the call on global id collision detection.

Oh I missed it.
Shall I provide a patch for nvme-5.19 or wait until the next window ?