Three small block layer patches
Subsystems (2)
v2 cover Three small block layer patches
Hi Jens,
These three patches are what I came up with while reading block layer code in preparation of the patch series for improving zoned write performance.
Please consider this patch series for kernel v5.20.
Thanks,
Bart.
Changes compared to v1:
- Modified patch 3/3 as suggested by Ming Lei.
Bart Van Assche (3):
blk-iocost: Simplify ioc_rqos_done()
block: Rename a blk_mq_map_queue() argument
block: Improve blk_mq_get_sq_hctx()
block/blk-iocost.c | 2 +- block/blk-mq.c | 2 +- block/blk-mq.h | 12 ++++++------ 3 files changed, 8 insertions(+), 8 deletions(-)
PATCH v2 1/3 blk-iocost: Simplify ioc_rqos_done()
Leave out the superfluous "& REQ_OP_MASK" code. The definition of req_op() shows that that code is superfluous:
#define req_op(req) ((req)->cmd_flags & REQ_OP_MASK)
Compile-tested only.
--- block/blk-iocost.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
block/blk-iocost.c +1 -1
@@ -2769,7 +2769,7 @@ static void ioc_rqos_done(struct rq_qos *rqos, struct request *rq)if (!ioc->enabled || !rq->alloc_time_ns || !rq->start_time_ns)return ; -switch (req_op (rq) &REQ_OP_MASK ) { +switch (req_op (rq)) {case REQ_OP_READ : pidx =QOS_RLAT ; rw =READ ;
Re: [PATCH v2 1/3] blk-iocost: Simplify ioc_rqos_done()
Looks good,
PATCH v2 2/3 block: Rename a blk_mq_map_queue() argument
In reply to Bart Van AsscheBefore the introduction of blk_mq_get_hctx_type(), blk_mq_map_queue() only used the flags from its second argument. Since the introduction of blk_mq_get_hctx_type(), blk_mq_map_queue() uses both the operation and the flags encoded in that argument. Rename the second argument of blk_mq_map_queue() to make this clear.
--- block/blk-mq.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
block/blk-mq.h +6 -6
@@ -86,16 +86,16 @@ static inline struct blk_mq_hw_ctx *blk_mq_map_queue_type(struct request_queue *return xa_load (&q->hctx_table, q->tag_set->map[type].mq_map[cpu]); } -static inline enum hctx_type blk_mq_get_hctx_type (unsigned int flags) +static inline enum hctx_type blk_mq_get_hctx_type (unsigned int opf) {enum hctx_type type =HCTX_TYPE_DEFAULT ;/* * The caller ensure that if REQ_POLLED, poll must be enabled. */ -if (flags &REQ_POLLED ) +if (opf &REQ_POLLED ) type =HCTX_TYPE_POLL ; -else if ((flags &REQ_OP_MASK ) ==REQ_OP_READ ) +else if ((opf &REQ_OP_MASK ) ==REQ_OP_READ ) type =HCTX_TYPE_READ ;return type; }
@@ -103,14 +103,14 @@ static inline enum hctx_type blk_mq_get_hctx_type(unsigned int flags)/* * blk_mq_map_queue() - map (cmd_flags,type) to hardware queue * @q: request queue -* @flags: request command flags +* @opf: operation type (REQ_OP_*) and flags (e.g. REQ_POLLED). * @ctx: software queue cpu ctx */ static inline struct blk_mq_hw_ctx *blk_mq_map_queue (struct request_queue *q, -unsigned int flags, +unsigned int opf,struct blk_mq_ctx *ctx) { -return ctx->hctxs[blk_mq_get_hctx_type (flags)]; +return ctx->hctxs[blk_mq_get_hctx_type (opf)]; }/*
Re: [PATCH v2 2/3] block: Rename a blk_mq_map_queue() argument
Looks good,
PATCH v2 3/3 block: Improve blk_mq_get_sq_hctx()
In reply to Bart Van AsscheSince the introduction of blk_mq_get_hctx_type() the operation type in the second argument of blk_mq_get_hctx_type() matters. Make sure that blk_mq_get_sq_hctx() selects a hardware queue of type HCTX_TYPE_DEFAULT instead of a hardware queue of type HCTX_TYPE_READ.
--- block/blk-mq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
block/blk-mq.c +1 -1
@@ -2168,7 +2168,7 @@ static struct blk_mq_hw_ctx *blk_mq_get_sq_hctx(struct request_queue *q)* just causes lock contention inside the scheduler and pointless cache * bouncing. */ -struct blk_mq_hw_ctx *hctx =blk_mq_map_queue (q,0 , ctx); +struct blk_mq_hw_ctx *hctx = ctx->hctxs[HCTX_TYPE_DEFAULT ];if (!blk_mq_hctx_stopped (hctx))return hctx;
Jens Axboe
maintainerRe: [PATCH v2 3/3] block: Improve blk_mq_get_sq_hctx()
Quoted 4 lines · Bart Van Assche
Since the introduction of
blk_mq_get_hctx_type()the operation type in the second argument ofblk_mq_get_hctx_type()matters. Make sure thatblk_mq_get_sq_hctx()selects a hardware queue of typeHCTX_TYPE_DEFAULTinstead of a hardware queue of typeHCTX_TYPE_READ.
You ignored my comment here. A good changelog explains WHY a change is made, not what the change does. For that, I can just read the change.
So please change the commit message to say WHY it's important. Or if it's not, make it clear that it is a cosmetic thing.
Signature · 1 line
Jens Axboe
Re: [PATCH v2 3/3] block: Improve blk_mq_get_sq_hctx()
In reply to Bart Van AsscheQuoted 17 lines · Bart Van Assche
Since the introduction of
blk_mq_get_hctx_type()the operation type in the second argument ofblk_mq_get_hctx_type()matters. Make sure thatblk_mq_get_sq_hctx()selects a hardware queue of typeHCTX_TYPE_DEFAULTinstead of a hardware queue of typeHCTX_TYPE_READ.Cc Ming Lei <[email protected]>Cc Christoph Hellwig <[email protected]>Signed-off-by Bart Van Assche <[email protected]>--- block/blk-mq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)block/blk-mq.c +0
-0
block/blk-mq.c static struct blk_mq_hw_ctx *blk_mq_get_sq_hctx(struct request_queue *q) · line 2174
Quoted 8 lines
block/blk-mq.c +1
-1@@ -2168,7 +2168,7 @@ static struct blk_mq_hw_ctx *blk_mq_get_sq_hctx(struct request_queue *q)* just causes lock contention inside the scheduler and pointless cache * bouncing. */ -struct blk_mq_hw_ctx *hctx =blk_mq_map_queue (q,0 , ctx); +struct blk_mq_hw_ctx *hctx = ctx->hctxs[HCTX_TYPE_DEFAULT ];if (!blk_mq_hctx_stopped (hctx))return hctx;
Looks fine, since the original behavior is to return hctx with HCTX_TYPE_DEFAULT before commit 5d05426e2d5f ("blk-mq: don't touch ->tagset in blk_mq_get_sq_hctx").
thanks,
Ming