Skip to contentSkip to conversation

powerpc: embedded6xx: Fix refcount leak bugs

PATCH Applied Liang He 2 participants 2 messages Jun 18, 2022 – Sep 9, 2022 PowerPC

lore
Share & tools
lore

Liang He

author
#0 lore raw

PATCH v2 1/1 powerpc: embedded6xx: Fix refcount leak bugs

In xx_init_xx(), of_find_node_by_type() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.

---
v2: we merge all embedded6xx related bugs into one commit
v1: we only report the bug in holly_init_pci() of holly.c

 arch/powerpc/platforms/embedded6xx/holly.c        | 6 ++++++
 arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c | 3 +++
 2 files changed, 9 insertions(+)
arch/powerpc/platforms/embedded6xx/holly.c +6 -0
index 78f2378d9223..bebc5a972694 100644
@@ -123,6 +123,8 @@ static void __init holly_init_pci(void)
 	if (np)
 		tsi108_setup_pci(np, HOLLY_PCI_CFG_PHYS, 1);
 
+	of_node_put(np);
+
 	ppc_md.pci_exclude_device = holly_exclude_device;
 	if (ppc_md.progress)
 		ppc_md.progress("tsi108: resources set", 0x100);
@@ -184,6 +186,9 @@ static void __init holly_init_IRQ(void)
 	tsi108_pci_int_init(cascade_node);
 	irq_set_handler_data(cascade_pci_irq, mpic);
 	irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
+
+	of_node_put(tsi_pci);
+	of_node_put(cascade_node);
 #endif
 	/* Configure MPIC outputs to CPU0 */
 	tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
@@ -210,6 +215,7 @@ static void __noreturn holly_restart(char *cmd)
 	if (bridge) {
 		prop = of_get_property(bridge, "reg", &size);
 		addr = of_translate_address(bridge, prop);
+		of_node_put(bridge);
 	}
 	addr += (TSI108_PB_OFFSET + 0x414);
 
arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +3 -0
index 8b2b42210356..ddf0c652af80 100644
@@ -135,6 +135,9 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 	tsi108_pci_int_init(cascade_node);
 	irq_set_handler_data(cascade_pci_irq, mpic);
 	irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
+
+	of_node_put(tsi_pci);
+	of_node_put(cascade_node);
 #endif
 	/* Configure MPIC outputs to CPU0 */
 	tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
Signature · 1 line
2.25.1