Skip to contentSkip to conversation

dmaengine: imx-sdma: Setting DMA_PRIVATE capability during the probe

PATCH In review Hui Wang 3 participants 4 messages May 24, 2022 – Jul 1, 2022

Subsystems (2)
lore
Share & tools
lore

Hui Wang

author
#0 lore raw

PATCH 1/1 dmaengine: imx-sdma: Setting DMA_PRIVATE capability during the probe

We have an imx6sx EVB, the audio driver fails to get a valid dma chan and the audio can't work at all on this board, below is the error log:
fsl-ssi-dai 202c000.ssi: Missing dma channel for stream: 0 202c000.ssi-nau8822-hifi: ASoC: pcm constructor failed: -22 asoc-simple-card sound: ASoC: can't create pcm 202c000.ssi-nau8822-hifi :-22

Then I checked the usage_count of each dma chan through sysfs, all channels are occupied as below:
ubuntu@ubuntu:cd /sys/devices/platform/soc/2000000.bus/20ec000.sdma/dma ubuntu@ubuntu:find . -iname in_use | xargs cat
2
2
2
...

Through debugging, we found the root cause, the crypo/async_tx/async_tx.c calls the dmaengine_get() ahead of registration of dma_device from imx-sdma.c. In the dmaengine_get(), the dmaengine_ref_count will be increased, then in the dma_async_device_register(), the client_count of each chan will be increased.

To fix this issue, we could set DMA_PRIVATE to the dma_deivce before registration.

---
 drivers/dma/imx-sdma.c | 1 +
 1 file changed, 1 insertion(+)
drivers/dma/imx-sdma.c +1 -0
index 95367a8a81a5..aabe8a8069fb 100644
@@ -2201,6 +2201,7 @@ static int sdma_probe(struct platform_device *pdev)
 	for (i = 0; i < sizeof(*sdma->script_addrs) / sizeof(s32); i++)
 		saddr_arr[i] = -EINVAL;
 
+	dma_cap_set(DMA_PRIVATE, sdma->dma_device.cap_mask);
 	dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask);
 	dma_cap_set(DMA_CYCLIC, sdma->dma_device.cap_mask);
 	dma_cap_set(DMA_MEMCPY, sdma->dma_device.cap_mask);
Signature · 1 line
2.25.1
author
#1 lore raw

Sorry, re-send the mail since the previous one contains the html-subparts, it is banned by dmaengine mailist.

Hi vkoul, hauer and shawnguo,

Could you take a look at this patch and the problem the patch plans to fix?

It is easy to reproduce the problem on i.mx platforms, just enabling the IMX_SDMA, ASYNC_CORE and ASYNC_TX_DMA as below:

CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_RAID456=y

CONFIG_IMX_SDMA=y

CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y

CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

And this is the .config of the kernel which could reproduce the problem:

https://pastebin.ubuntu.com/p/5Pb3JzrWJZ/

And this is the dmesg of v5.19-rc2 on an i.mx6 platform, we could see audio driver fails because of dma allocation:

https://pastebin.ubuntu.com/p/rz7jsXgyJJ/

[    5.779584] fsl-ssi-dai 202c000.ssi: Missing dma channel for stream: 0
[    5.779601] fsl-ssi-dai 202c000.ssi: ASoC: error at snd_soc_pcm_component_new on 202c000.ssi: -22 [    5.779616] fsl-asoc-card sound-nau8822: ASoC: can't create pcm HiFi :-22
[    5.784479] fsl-asoc-card sound-nau8822: error -EINVAL: snd_soc_register_card failed [    5.784501] fsl-asoc-card: probe of sound-nau8822 failed with error -22

And this problem also could be reproduced on i.mx8 platforms, If needing me to provide log for i.mx8, let me know.

Thanks,

Quoted 42 lines · Hui Wang

We have an imx6sx EVB, the audio driver fails to get a valid dma chan and the audio can't work at all on this board, below is the error log:
fsl-ssi-dai 202c000.ssi: Missing dma channel for stream: 0 202c000.ssi-nau8822-hifi: ASoC: pcm constructor failed: -22 asoc-simple-card sound: ASoC: can't create pcm 202c000.ssi-nau8822-hifi :-22

Then I checked the usage_count of each dma chan through sysfs, all channels are occupied as below:
ubuntu@ubuntu:cd /sys/devices/platform/soc/2000000.bus/20ec000.sdma/dma ubuntu@ubuntu:find . -iname in_use | xargs cat
2
2
2
...

Through debugging, we found the root cause, the crypo/async_tx/async_tx.c calls the dmaengine_get() ahead of registration of dma_device from imx-sdma.c. In the dmaengine_get(), the dmaengine_ref_count will be increased, then in the dma_async_device_register(), the client_count of each chan will be increased.

To fix this issue, we could set DMA_PRIVATE to the dma_deivce before registration.

---
  drivers/dma/imx-sdma.c | 1 +
  1 file changed, 1 insertion(+)
drivers/dma/imx-sdma.c +1 -0
index 95367a8a81a5..aabe8a8069fb 100644
@@ -2201,6 +2201,7 @@ static int sdma_probe(struct platform_device *pdev)
  	for (i = 0; i < sizeof(*sdma->script_addrs) / sizeof(s32); i++)
  		saddr_arr[i] = -EINVAL;
 
+	dma_cap_set(DMA_PRIVATE, sdma->dma_device.cap_mask);
  	dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask);
  	dma_cap_set(DMA_CYCLIC, sdma->dma_device.cap_mask);
  	dma_cap_set(DMA_MEMCPY, sdma->dma_device.cap_mask);
maintainer
#2 lore raw
In reply to Hui Wang
Quoted 35 lines · Hui Wang

We have an imx6sx EVB, the audio driver fails to get a valid dma chan and the audio can't work at all on this board, below is the error log:
fsl-ssi-dai 202c000.ssi: Missing dma channel for stream: 0 202c000.ssi-nau8822-hifi: ASoC: pcm constructor failed: -22 asoc-simple-card sound: ASoC: can't create pcm 202c000.ssi-nau8822-hifi :-22

Then I checked the usage_count of each dma chan through sysfs, all channels are occupied as below:
ubuntu@ubuntu:cd /sys/devices/platform/soc/2000000.bus/20ec000.sdma/dma ubuntu@ubuntu:find . -iname in_use | xargs cat
2
2
2
...

Through debugging, we found the root cause, the crypo/async_tx/async_tx.c calls the dmaengine_get() ahead of registration of dma_device from imx-sdma.c. In the dmaengine_get(), the dmaengine_ref_count will be increased, then in the dma_async_device_register(), the client_count of each chan will be increased.

To fix this issue, we could set DMA_PRIVATE to the dma_deivce before registration.

---
 drivers/dma/imx-sdma.c | 1 +
 1 file changed, 1 insertion(+)
drivers/dma/imx-sdma.c +0 -0
index 95367a8a81a5..aabe8a8069fb 100644

drivers/dma/imx-sdma.c static int sdma_probe(struct platform_device *pdev) · line 2204

Quoted 4 lines
drivers/dma/imx-sdma.c +1 -0
@@ -2201,6 +2201,7 @@ static int sdma_probe(struct platform_device *pdev)
 	for (i = 0; i < sizeof(*sdma->script_addrs) / sizeof(s32); i++)
 		saddr_arr[i] = -EINVAL;
 
+	dma_cap_set(DMA_PRIVATE, sdma->dma_device.cap_mask);

I am not sure about the impacts on the memcpy capability of the SDMA driver when setting this flag. It looks like this flag influences the way suitable channels are picked for memcpy, but I don't understand the code just by looking at it. I see that several other drivers providing memcpy set this flag as well, so I guess it's ok to set it, but it would be good to hear a word from Vinod about it.

Sascha

Signature · 4 lines
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
maintainer
#3 lore raw
Quoted 10 lines · Sascha Hauer

drivers/dma/imx-sdma.c static int sdma_probe(struct platform_device *pdev) · line 2204

Quoted 1 line · Hui Wang
drivers/dma/imx-sdma.c +1 -0
+	dma_cap_set(DMA_PRIVATE, sdma->dma_device.cap_mask);

I am not sure about the impacts on the memcpy capability of the SDMA driver when setting this flag. It looks like this flag influences the way suitable channels are picked for memcpy, but I don't understand the code just by looking at it. I see that several other drivers providing memcpy set this flag as well, so I guess it's ok to set it, but it would be good to hear a word from Vinod about it.

So DMA_PRIVATE is used to make channel not available for general dma allocation. So yes it would impact dma memcpy which is about allocating generically.

Signature · 1 line
~Vinod