ACPI: save NVS memory for Lenovo G40-45
PATCH 1/1 ACPI: save NVS memory for Lenovo G40-45
[821d6f0359b0614792ab8e2fb93b503e25a65079] is to make machines produced from 2012 to now not saving NVS region to accelerate S3.
But, Lenovo G40-45, a platform released in 2015, still needs NVS memory saving during S3. A quirk is introduced for this platform.
Signed-off-by Manyi Li <[email protected]>
--- drivers/acpi/sleep.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/acpi/sleep.c +8 -0
@@ -360,6 +360,14 @@ static const struct dmi_system_id acpisleep_dmi_table[] __initconst = { DMI_MATCH(DMI_PRODUCT_NAME, "80E3"), }, }, + { + .callback = init_nvs_save_s3, + .ident = "Lenovo G40-45", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "80E1"), + }, + },/* * ThinkPad X1 Tablet(2016) cannot do suspend-to-idle using * the Low Power S0 Idle firmware interface (see
Signature · 1 line
2.20.1
Quoted 22 lines · Manyi Li
[
821d6f0359b0614792ab8e2fb93b503e25a65079] is to make machines produced from 2012 to now not saving NVS region to accelerate S3.But, Lenovo G40-45, a platform released in 2015, still needs NVS memory saving during S3. A quirk is introduced for this platform.
Signed-off-by Manyi Li <[email protected]>--- drivers/acpi/sleep.c | 8 ++++++++ 1 file changed, 8 insertions(+)drivers/acpi/sleep.c +2
-0@@ -360,6 +360,14 @@ static const struct dmi_system_id acpisleep_dmi_table[] __initconst = { DMI_MATCH(DMI_PRODUCT_NAME, "80E3"), }, }, + { + .callback = init_nvs_save_s3,
drivers/acpi/sleep.c static const struct dmi_system_id acpisleep_dmi_table[] __initconst = {
Quoted 10 lines
drivers/acpi/sleep.c +6
-1+ .ident = "Lenovo G40-45", + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"LENOVO" ), + DMI_MATCH(DMI_PRODUCT_NAME, "80E1"), + }, + },/* * ThinkPad X1 Tablet(2016) cannot do suspend-to-idle using * the Low Power S0 Idle firmware interface (see --
Applied as 5.20 material, thanks!