Add support for dphy tx on j721e
Subsystems (2)
v3 cover Add support for dphy tx on j721e
following series of patches adds support for dphy tx on ti's j721e soc. new compatible is added and required cdns dphy ops are implemented. the series also adds band ctrl configuration required for dphy tx
v3:
-Fixed the header files order
-Store bands as array of unsigned int, since min[n] = max[n-1] -Remove unreachable code warning
v2:
-fix a build error reported by kernel test robot <[email protected]>
which uses clang compiler. did not get the error with gnu toolchain 9.2-2019.12
Rahul T R (3):
phy: dt-bindings: cdns,dphy: Add compatible for dphy on j721e
phy: cdns-dphy: Add band config for dphy tx
phy: cdns-dphy: Add support for DPHY TX on J721e
.../devicetree/bindings/phy/cdns,dphy.yaml | 5 +- drivers/phy/cadence/Kconfig | 10 ++ drivers/phy/cadence/cdns-dphy.c | 102 +++++++++++++++++- 3 files changed, 114 insertions(+), 3 deletions(-)
Signature · 1 line
2.36.1
PATCH v3 1/3 phy: dt-bindings: cdns,dphy: Add compatible for dphy on j721e
Add compatible to support dphy tx on j721e
--- Documentation/devicetree/bindings/phy/cdns,dphy.yaml | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/phy/cdns,dphy.yaml +3 -2
@@ -11,8 +11,9 @@ maintainers: properties: compatible: - items: - - const: cdns,dphy + enum: + - cdns,dphy + - ti,j721e-dphy reg: maxItems: 1
Signature · 1 line
2.36.1
Re: [PATCH v3 1/3] phy: dt-bindings: cdns,dphy: Add compatible for dphy on j721e
Quoted 5 lines · Rahul T R
Add compatible to support dphy tx on j721e
Signed-off-by Rahul T R <[email protected]>Reviewed-by Laurent Pinchart <[email protected]>---
Best regards,
Krzysztof
PATCH v3 2/3 phy: cdns-dphy: Add band config for dphy tx
In reply to Rahul T RAdd support for band ctrl config for dphy tx.
--- drivers/phy/cadence/cdns-dphy.c | 40 ++++++++++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-)
drivers/phy/cadence/cdns-dphy.c +39 -1
@@ -3,6 +3,7 @@* Copyright: 2017-2018 Cadence Design Systems, Inc. */ +#include <linux/bitfield.h> #include <linux/bitops.h> #include <linux/clk.h> #include <linux/io.h>
@@ -45,6 +46,10 @@#define DPHY_CMN_OPDIV_FROM_REG BIT(6)#define DPHY_CMN_OPDIV (x) ((x) << 7) +#define DPHY_BAND_CFG DPHY_PCS(0x0) +#define DPHY_BAND_CFG_LEFT_BAND GENMASK(4, 0) +#define DPHY_BAND_CFG_RIGHT_BAND GENMASK(9, 5) +#define DPHY_PSM_CFG DPHY_PCS(0x4)#define DPHY_PSM_CFG_FROM_REG BIT(0)#define DPHY_PSM_CLK_DIV (x) ((x) << 1)
@@ -92,6 +97,12 @@ struct cdns_dphy {struct phy *phy; }; +/* Order of bands is important since the index is the band number. */ +static const unsigned int tx_bands[] = { +80 ,100 ,120 ,160 ,200 ,240 ,320 ,390 ,450 ,510 ,560 ,640 ,690 ,770 , +870 ,950 ,1000 ,1200 ,1400 ,1600 ,1800 ,2000 ,2200 ,2500 +}; + static int cdns_dsi_get_dphy_pll_cfg(struct cdns_dphy *dphy, struct cdns_dphy_cfg *cfg, struct phy_configure_opts_mipi_dphy *opts,
@@ -232,6 +243,24 @@ static int cdns_dphy_config_from_opts(struct phy *phy,return 0 ; } +static int cdns_dphy_tx_get_band_ctrl (unsigned long hs_clk_rate) +{ +unsigned int rate; +int i; + + rate = hs_clk_rate /1000000UL ; + +if (rate < tx_bands[0 ]) +return -EOPNOTSUPP ; + +for (i =0 ; i <ARRAY_SIZE (tx_bands) -1 ; i++) { +if (rate >= tx_bands[i] && rate < tx_bands[i +1 ]) +return i; + } + +return -EOPNOTSUPP ; +} +static int cdns_dphy_validate (struct phy *phy,enum phy_mode mode,int submode,union phy_configure_opts *opts) {
@@ -247,7 +276,8 @@ static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts) {struct cdns_dphy *dphy =phy_get_drvdata (phy);struct cdns_dphy_cfg cfg = {0 }; -int ret; +int ret, band_ctrl; +unsigned int reg; ret =cdns_dphy_config_from_opts (phy, &opts->mipi_dphy, &cfg);if (ret)
@@ -276,6 +306,14 @@ static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts)*/ cdns_dphy_set_pll_cfg (dphy, &cfg); + band_ctrl =cdns_dphy_tx_get_band_ctrl (opts->mipi_dphy.hs_clk_rate); +if (band_ctrl <0 ) +return band_ctrl; + + reg =FIELD_PREP (DPHY_BAND_CFG_LEFT_BAND , band_ctrl) | +FIELD_PREP (DPHY_BAND_CFG_RIGHT_BAND , band_ctrl); +writel (reg, dphy->regs +DPHY_BAND_CFG ); +return 0 ; }
Signature · 1 line
2.36.1
Re: [PATCH v3 2/3] phy: cdns-dphy: Add band config for dphy tx
Quoted 3 lines · Rahul T R
Add support for band ctrl config for dphy tx.
Signed-off-by Rahul T R <[email protected]>
Signature · 8 lines
Regards, Pratyush Yadav Texas Instruments Inc. -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
PATCH v3 3/3 phy: cdns-dphy: Add support for DPHY TX on J721e
In reply to Rahul T RAdd support new compatible for dphy-tx on j721e
and implement dphy ops required.
--- drivers/phy/cadence/Kconfig | 10 ++++++ drivers/phy/cadence/cdns-dphy.c | 62 +++++++++++++++++++++++++++++++++ 2 files changed, 72 insertions(+)
drivers/phy/cadence/Kconfig +10 -0
@@ -22,6 +22,16 @@ config PHY_CADENCE_DPHY system. If M is selected, the module will be called cdns-dphy. +if PHY_CADENCE_DPHY + +config PHY_CADENCE_DPHY_J721E + depends on ARCH_K3 || COMPILE_TEST + bool "J721E DPHY TX Wiz support" + default y + help + Support J721E Cadence DPHY TX Wiz configuration. +endif + config PHY_CADENCE_DPHY_RX tristate "Cadence D-PHY Rx Support" depends on HAS_IOMEM && OF
drivers/phy/cadence/cdns-dphy.c +62 -0
98 lines not on this page · raw message
Signature · 1 line
2.36.1
Re: [PATCH v3 3/3] phy: cdns-dphy: Add support for DPHY TX on J721e
Hi Rahul,
Quoted 70 lines · Rahul T R
Add support new compatible for dphy-tx on j721e
and implement dphy ops required.Signed-off-by Rahul T R <[email protected]>--- drivers/phy/cadence/Kconfig | 10 ++++++ drivers/phy/cadence/cdns-dphy.c | 62 +++++++++++++++++++++++++++++++++ 2 files changed, 72 insertions(+)drivers/phy/cadence/Kconfig +10
-0@@ -22,6 +22,16 @@ config PHY_CADENCE_DPHY system. If M is selected, the module will be called cdns-dphy. +if PHY_CADENCE_DPHY + +config PHY_CADENCE_DPHY_J721E + depends on ARCH_K3 || COMPILE_TEST + bool "J721E DPHY TX Wiz support" + default y + help + Support J721E Cadence DPHY TX Wiz configuration. +endif + config PHY_CADENCE_DPHY_RX tristate "Cadence D-PHY Rx Support" depends on HAS_IOMEM && OFdrivers/phy/cadence/cdns-dphy.c +14
-0@@ -7,6 +7,7 @@#include <linux/bitops.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/module.h> #include <linux/of_address.h> #include <linux/of_device.h> @@ -18,6 +19,7 @@#define REG_WAKEUP_TIME_NS 800#define DPHY_PLL_RATE_HZ 108000000 +#define POLL_TIMEOUT_US 1000/* DPHY registers */ #define DPHY_PMA_CMN (reg) (reg)@@ -62,6 +64,18 @@#define DSI_NULL_FRAME_OVERHEAD 6#define DSI_EOT_PKT_SIZE 4 +#define DPHY_TX_J721E_WIZ_PLL_CTRL 0xF04 +#define DPHY_TX_J721E_WIZ_STATUS 0xF08 +#define DPHY_TX_J721E_WIZ_RST_CTRL 0xF0C +#define DPHY_TX_J721E_WIZ_PSM_FREQ 0xF10 + +#define DPHY_TX_J721E_WIZ_IPDIV GENMASK(4, 0) +#define DPHY_TX_J721E_WIZ_OPDIV GENMASK(13, 8) +#define DPHY_TX_J721E_WIZ_FBDIV GENMASK(25, 16) +#define DPHY_TX_J721E_WIZ_LANE_RSTB BIT(31) +#define DPHY_TX_WIZ_PLL_LOCK BIT(31) +#define DPHY_TX_WIZ_O_CMN_READY BIT(31) +struct cdns_dphy_cfg {u8 pll_ipdiv;u8 pll_opdiv;
drivers/phy/cadence/cdns-dphy.c static void cdns_dphy_ref_set_psm_div(struct cdns_dphy *dphy, u8 div) · line 227
Quoted 4 lines
drivers/phy/cadence/cdns-dphy.c +1
-0@@ -210,6 +224,43 @@ static void cdns_dphy_ref_set_psm_div(struct cdns_dphy *dphy, u8 div) dphy->regs + DPHY_PSM_CFG); } +#ifdef CONFIG_PHY_CADENCE_DPHY_J721E
Honestly, I don't think there is much use for using this config here. I prefer to have as little ifdefs scattered in code as possible. And I don't think the code you add makes much of a difference in terms of size.
I have not looked much into the WIZ module but the code looks fine to me.
drivers/phy/cadence/cdns-dphy.c static void cdns_dphy_ref_set_psm_div(struct cdns_dphy *dphy, u8 div) · line 239
Quoted 12 lines
drivers/phy/cadence/cdns-dphy.c +12
-0+static unsigned long cdns_dphy_j721e_get_wakeup_time_ns (struct cdns_dphy *dphy) +{ +return 1000000 ; +} + +static void cdns_dphy_j721e_set_pll_cfg (struct cdns_dphy *dphy, +const struct cdns_dphy_cfg *cfg) +{ +u32 status; + + writel(DPHY_CMN_PWM_HIGH(6) | DPHY_CMN_PWM_LOW(0x101) | + DPHY_CMN_PWM_DIV(0x8),
Please avoid using magic numbers. Or if you are going to use them, at least explain in a comment what they are doing.
Quoted 55 lines
drivers/phy/cadence/cdns-dphy.c +35
-0+ dphy->regs + DPHY_CMN_PWM); + +writel ((FIELD_PREP (DPHY_TX_J721E_WIZ_IPDIV , cfg->pll_ipdiv) | +FIELD_PREP (DPHY_TX_J721E_WIZ_OPDIV , cfg->pll_opdiv) | +FIELD_PREP (DPHY_TX_J721E_WIZ_FBDIV , cfg->pll_fbdiv)), + dphy->regs +DPHY_TX_J721E_WIZ_PLL_CTRL ); + +writel (DPHY_TX_J721E_WIZ_LANE_RSTB , + dphy->regs +DPHY_TX_J721E_WIZ_RST_CTRL ); + +readl_poll_timeout (dphy->regs +DPHY_TX_J721E_WIZ_PLL_CTRL , status, + (status &DPHY_TX_WIZ_PLL_LOCK ),0 ,POLL_TIMEOUT_US ); + +readl_poll_timeout (dphy->regs +DPHY_TX_J721E_WIZ_STATUS , status, + (status &DPHY_TX_WIZ_O_CMN_READY ),0 , + POLL_TIMEOUT_US); +} + +static void cdns_dphy_j721e_set_psm_div (struct cdns_dphy *dphy,u8 div) +{ +writel (div, dphy->regs +DPHY_TX_J721E_WIZ_PSM_FREQ ); +} +#endif /* !CONFIG_PHY_CADENCE_DPHY_J721E */ +/* * This is the reference implementation of DPHY hooks. Specific integration of * this IP may have to re-implement some of them depending on how they decided @@ -221,6 +272,14 @@ static const struct cdns_dphy_ops ref_dphy_ops = { .set_psm_div = cdns_dphy_ref_set_psm_div, }; +#ifdef CONFIG_PHY_CADENCE_DPHY_J721E +static const struct cdns_dphy_ops j721e_dphy_ops = { + .get_wakeup_time_ns = cdns_dphy_j721e_get_wakeup_time_ns, + .set_pll_cfg = cdns_dphy_j721e_set_pll_cfg, + .set_psm_div = cdns_dphy_j721e_set_psm_div, +}; +#endif /* !CONFIG_PHY_CADENCE_DPHY_J721E */ +static int cdns_dphy_config_from_opts (struct phy *phy,struct phy_configure_opts_mipi_dphy *opts,struct cdns_dphy_cfg *cfg)@@ -408,6 +467,9 @@ static int cdns_dphy_remove(struct platform_device *pdev)static const struct of_device_id cdns_dphy_of_match[] = { { .compatible ="cdns,dphy" , .data = &ref_dphy_ops }, +#ifdef CONFIG_PHY_CADENCE_DPHY_J721E + { .compatible ="ti,j721e-dphy" , .data = &j721e_dphy_ops }, +#endif /* !CONFIG_PHY_CADENCE_DPHY_J721E */ {/* sentinel */ }, };MODULE_DEVICE_TABLE (of, cdns_dphy_of_match);Signature · 1 line
2.36.1
Signature · 8 lines
Regards, Pratyush Yadav Texas Instruments Inc. -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
Re: [PATCH v3 3/3] phy: cdns-dphy: Add support for DPHY TX on J721e
Hi Pratyush,
Quoted 86 lines · Pratyush Yadav
Hi Rahul,
Quoted 70 lines · Rahul T R
Add support new compatible for dphy-tx on j721e
and implement dphy ops required.Signed-off-by Rahul T R <[email protected]>--- drivers/phy/cadence/Kconfig | 10 ++++++ drivers/phy/cadence/cdns-dphy.c | 62 +++++++++++++++++++++++++++++++++ 2 files changed, 72 insertions(+)drivers/phy/cadence/Kconfig +10
-0@@ -22,6 +22,16 @@ config PHY_CADENCE_DPHY system. If M is selected, the module will be called cdns-dphy. +if PHY_CADENCE_DPHY + +config PHY_CADENCE_DPHY_J721E + depends on ARCH_K3 || COMPILE_TEST + bool "J721E DPHY TX Wiz support" + default y + help + Support J721E Cadence DPHY TX Wiz configuration. +endif + config PHY_CADENCE_DPHY_RX tristate "Cadence D-PHY Rx Support" depends on HAS_IOMEM && OFdrivers/phy/cadence/cdns-dphy.c +14
-0@@ -7,6 +7,7 @@#include <linux/bitops.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/module.h> #include <linux/of_address.h> #include <linux/of_device.h> @@ -18,6 +19,7 @@#define REG_WAKEUP_TIME_NS 800#define DPHY_PLL_RATE_HZ 108000000 +#define POLL_TIMEOUT_US 1000/* DPHY registers */ #define DPHY_PMA_CMN (reg) (reg)@@ -62,6 +64,18 @@#define DSI_NULL_FRAME_OVERHEAD 6#define DSI_EOT_PKT_SIZE 4 +#define DPHY_TX_J721E_WIZ_PLL_CTRL 0xF04 +#define DPHY_TX_J721E_WIZ_STATUS 0xF08 +#define DPHY_TX_J721E_WIZ_RST_CTRL 0xF0C +#define DPHY_TX_J721E_WIZ_PSM_FREQ 0xF10 + +#define DPHY_TX_J721E_WIZ_IPDIV GENMASK(4, 0) +#define DPHY_TX_J721E_WIZ_OPDIV GENMASK(13, 8) +#define DPHY_TX_J721E_WIZ_FBDIV GENMASK(25, 16) +#define DPHY_TX_J721E_WIZ_LANE_RSTB BIT(31) +#define DPHY_TX_WIZ_PLL_LOCK BIT(31) +#define DPHY_TX_WIZ_O_CMN_READY BIT(31) +struct cdns_dphy_cfg {u8 pll_ipdiv;u8 pll_opdiv;drivers/phy/cadence/cdns-dphy.c static void cdns_dphy_ref_set_psm_div(struct cdns_dphy *dphy, u8 div) · line 227
Quoted 4 lines
drivers/phy/cadence/cdns-dphy.c +1
-0@@ -210,6 +224,43 @@ static void cdns_dphy_ref_set_psm_div(struct cdns_dphy *dphy, u8 div) dphy->regs + DPHY_PSM_CFG); } +#ifdef CONFIG_PHY_CADENCE_DPHY_J721E Honestly, I don't think there is much use for using this config here. I prefer to have as little ifdefs scattered in code as possible. And I don't think the code you add makes much of a difference in terms of size.
I have not looked much into the WIZ module but the code looks fine to me.
Quoted 16 lines
drivers/phy/cadence/cdns-dphy.c static void cdns_dphy_ref_set_psm_div(struct cdns_dphy *dphy, u8 div) · line 239
Quoted 12 lines
drivers/phy/cadence/cdns-dphy.c +12
-0+static unsigned long cdns_dphy_j721e_get_wakeup_time_ns (struct cdns_dphy *dphy) +{ +return 1000000 ; +} + +static void cdns_dphy_j721e_set_pll_cfg (struct cdns_dphy *dphy, +const struct cdns_dphy_cfg *cfg) +{ +u32 status; + + writel(DPHY_CMN_PWM_HIGH(6) | DPHY_CMN_PWM_LOW(0x101) | + DPHY_CMN_PWM_DIV(0x8),Please avoid using magic numbers. Or if you are going to use them, at least explain in a comment what they are doing.
Thanks for the review!
I have addressed your review comments
and sent a v4
Please review,
Regards
Rahul T R
Quoted 60 lines
Quoted 55 lines
drivers/phy/cadence/cdns-dphy.c +35
-0+ dphy->regs + DPHY_CMN_PWM); + +writel ((FIELD_PREP (DPHY_TX_J721E_WIZ_IPDIV , cfg->pll_ipdiv) | +FIELD_PREP (DPHY_TX_J721E_WIZ_OPDIV , cfg->pll_opdiv) | +FIELD_PREP (DPHY_TX_J721E_WIZ_FBDIV , cfg->pll_fbdiv)), + dphy->regs +DPHY_TX_J721E_WIZ_PLL_CTRL ); + +writel (DPHY_TX_J721E_WIZ_LANE_RSTB , + dphy->regs +DPHY_TX_J721E_WIZ_RST_CTRL ); + +readl_poll_timeout (dphy->regs +DPHY_TX_J721E_WIZ_PLL_CTRL , status, + (status &DPHY_TX_WIZ_PLL_LOCK ),0 ,POLL_TIMEOUT_US ); + +readl_poll_timeout (dphy->regs +DPHY_TX_J721E_WIZ_STATUS , status, + (status &DPHY_TX_WIZ_O_CMN_READY ),0 , + POLL_TIMEOUT_US); +} + +static void cdns_dphy_j721e_set_psm_div (struct cdns_dphy *dphy,u8 div) +{ +writel (div, dphy->regs +DPHY_TX_J721E_WIZ_PSM_FREQ ); +} +#endif /* !CONFIG_PHY_CADENCE_DPHY_J721E */ +/* * This is the reference implementation of DPHY hooks. Specific integration of * this IP may have to re-implement some of them depending on how they decided @@ -221,6 +272,14 @@ static const struct cdns_dphy_ops ref_dphy_ops = { .set_psm_div = cdns_dphy_ref_set_psm_div, }; +#ifdef CONFIG_PHY_CADENCE_DPHY_J721E +static const struct cdns_dphy_ops j721e_dphy_ops = { + .get_wakeup_time_ns = cdns_dphy_j721e_get_wakeup_time_ns, + .set_pll_cfg = cdns_dphy_j721e_set_pll_cfg, + .set_psm_div = cdns_dphy_j721e_set_psm_div, +}; +#endif /* !CONFIG_PHY_CADENCE_DPHY_J721E */ +static int cdns_dphy_config_from_opts (struct phy *phy,struct phy_configure_opts_mipi_dphy *opts,struct cdns_dphy_cfg *cfg)@@ -408,6 +467,9 @@ static int cdns_dphy_remove(struct platform_device *pdev)static const struct of_device_id cdns_dphy_of_match[] = { { .compatible ="cdns,dphy" , .data = &ref_dphy_ops }, +#ifdef CONFIG_PHY_CADENCE_DPHY_J721E + { .compatible ="ti,j721e-dphy" , .data = &j721e_dphy_ops }, +#endif /* !CONFIG_PHY_CADENCE_DPHY_J721E */ {/* sentinel */ }, };MODULE_DEVICE_TABLE (of, cdns_dphy_of_match);Signature · 1 line
2.36.1Signature · 3 lines
Regards, Pratyush Yadav Texas Instruments Inc.