dt-bindings: arm: stm32: Add compatible string for DH electronics DHCOR DRC Compact
Subsystems (4)
PATCH v3 1/7 dt-bindings: arm: stm32: Add compatible string for DH electronics DHCOR DRC Compact
Add DT compatible string for DH electronics STM32MP15xx DHCOR on DRC Compact carrier board into YAML DT binding document. This system is a general purpose DIN Rail Controller design.
To: [email protected]
---
V2: Split DHCOM and DHCOR SoM entries
V3: No change
--- Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/arm/stm32/stm32.yaml +7 -1
@@ -59,12 +59,18 @@ properties: - prt,prtt1s # Protonic PRTT1S - const: st,stm32mp151 - - description: DH STM32MP153 SoM based Boards + - description: DH STM32MP153 DHCOM SoM based Boards items: - const: dh,stm32mp153c-dhcom-drc02 - const: dh,stm32mp153c-dhcom-som - const: st,stm32mp153 + - description: DH STM32MP153 DHCOR SoM based Boards + items: + - const: dh,stm32mp153c-dhcor-drc-compact + - const: dh,stm32mp153c-dhcor-som + - const: st,stm32mp153 + - items: - enum: - shiratech,stm32mp157a-iot-box # IoT Box
Signature · 1 line
2.35.1
PATCH v3 2/7 ARM: dts: stm32: Add alternate pinmux for CAN1 pins
Add another mux option for CAN1 pins, this is used on DRC Compact board.
To: [email protected]
---
V2: No change
V3: No change
--- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +20 -0
@@ -1030,6 +1030,26 @@ pins { }; }; + m_can1_pins_c: m-can1-2 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + + m_can1_sleep_pins_c: m_can1-sleep-2 { + pins { + pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */ + <STM32_PINMUX('H', 14, ANALOG)>; /* CAN1_RX */ + }; + }; + m_can2_pins_a: m-can2-0 { pins1 { pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
Signature · 7 lines
2.35.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v3 3/7 ARM: dts: stm32: Add alternate pinmux for SPI2 pins
In reply to Marek VasutAdd another mux option for SPI2 pins, this is used on DRC Compact board.
To: [email protected]
---
V2: No change
V3: Fix SPI1_ comments to SPI2_ to match reality
--- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +15 -0
@@ -1879,6 +1879,21 @@ pins2 { }; }; + spi2_pins_b: spi2-1 { + pins1 { + pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI2_SCK */ + <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */ + bias-disable; + }; + }; + spi4_pins_a: spi4-0 { pins { pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
Signature · 7 lines
2.35.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v3 4/7 ARM: dts: stm32: Add alternate pinmux for UART3 pins
In reply to Marek VasutAdd another mux option for UART3 pins, this is used on DRC Compact board.
To: [email protected]
---
V2: No change
V3: No change
--- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 41 ++++++++++++++++++++++++ 1 file changed, 41 insertions(+)
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +41 -0
@@ -2270,6 +2270,47 @@ pins { }; }; + usart3_pins_e: usart3-4 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */ + <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */ + <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */ + bias-pull-up; + }; + }; + + usart3_idle_pins_e: usart3-idle-4 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */ + <STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('B', 11, AF7)>; /* USART3_RX */ + bias-pull-up; + }; + }; + + usart3_sleep_pins_e: usart3-sleep-4 { + pins { + pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */ + <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */ + <STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */ + <STM32_PINMUX('B', 11, ANALOG)>; /* USART3_RX */ + }; + }; + usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
Signature · 7 lines
2.35.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v3 5/7 ARM: dts: stm32: Add alternate pinmux for UART4 pins
In reply to Marek VasutAdd another mux option for UART4 pins, this is used on DRC Compact board.
To: [email protected]
---
V2: No change
V3: No change
--- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 30 ++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +30 -0
@@ -1971,6 +1971,36 @@ pins2 { }; }; + uart4_pins_d: uart4-3 { + pins1 { + pinmux = <STM32_PINMUX('A', 13, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_idle_pins_d: uart4-idle-3 { + pins1 { + pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* UART4_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_sleep_pins_d: uart4-sleep-3 { + pins { + pinmux = <STM32_PINMUX('A', 13, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */ + }; + }; + uart7_pins_a: uart7-0 { pins1 { pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
Signature · 7 lines
2.35.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v3 6/7 ARM: dts: stm32: Add alternate pinmux for UART5 pins
In reply to Marek VasutAdd another mux option for UART5 pins, this is used on DRC Compact board.
To: [email protected]
---
V2: No change
V3: No change
--- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +13 -0
@@ -2001,6 +2001,19 @@ pins { }; }; + uart5_pins_a: uart5-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 13, AF14)>; /* UART5_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 5, AF12)>; /* UART5_RX */ + bias-disable; + }; + }; + uart7_pins_a: uart7-0 { pins1 { pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
Signature · 7 lines
2.35.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v3 7/7 ARM: dts: stm32: Add DHCOR based DRC Compact board
In reply to Marek VasutAdd DT for DH DRC Compact unit, which is a universal controller device. The system has two ethernet ports, one CAN, RS485 and RS232, USB, uSD card slot, eMMC and SDIO Wi-Fi.
To: [email protected]
---
V2: No change
V3: No change
--- arch/arm/boot/dts/Makefile | 1 + .../dts/stm32mp153c-dhcor-drc-compact.dts | 30 ++ .../dts/stm32mp15xx-dhcor-drc-compact.dtsi | 322 ++++++++++++++++++ 3 files changed, 353 insertions(+) create mode 100644 arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dts create mode 100644 arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
arch/arm/boot/dts/Makefile +1 -0
@@ -1206,6 +1206,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp151a-prtt1c.dtb \ stm32mp151a-prtt1s.dtb \ stm32mp153c-dhcom-drc02.dtb \ + stm32mp153c-dhcor-drc-compact.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ stm32mp157a-dk1.dtb \
arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dts new file +30 -0
@@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) 2022 Marek Vasut <[email protected]> + * + * DHCOR STM32MP1 variant: + * DHCR-STM32MP153C-C065-R051-V33-SPI-I-01LG + * DHCOR PCB number: 586-100 or newer + * DRC Compact PCB number: 627-100 or newer + */ + +/dts-v1/; + +#include "stm32mp153.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xx-dhcor-som.dtsi" +#include "stm32mp15xx-dhcor-drc-compact.dtsi" + +/ { + model = "DH electronics STM32MP153C DHCOR DRC Compact"; + compatible = "dh,stm32mp153c-dhcor-drc-compact", + "dh,stm32mp153c-dhcor-som", + "st,stm32mp153"; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_c>; + pinctrl-1 = <&m_can1_sleep_pins_c>; + status = "okay"; +};
arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi new file +322 -0
322 lines not on this page · raw message
Signature · 7 lines
2.35.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Alexandre TORGUE
maintainerRe: [PATCH v3 7/7] ARM: dts: stm32: Add DHCOR based DRC Compact board
Hi Marek
Quoted 4 lines · Marek Vasut
Add DT for DH DRC Compact unit, which is a universal controller device. The system has two ethernet ports, one CAN, RS485 and RS232, USB, uSD card slot, eMMC and SDIO Wi-Fi.
Quoted 8 lines
Signed-off-by Marek Vasut <[email protected]>Cc Alexandre Torgue <[email protected]>To: [email protected]
---
V2: No change
V3: No change
---
Series applied on stm32-next;
Thanks
Alex
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 12 lines · Marek Vasut
Add DT compatible string for DH electronics STM32MP15xx DHCOR on DRC Compact carrier board into YAML DT binding document. This system is a general purpose DIN Rail Controller design.
Signed-off-by Marek Vasut <[email protected]>Cc Alexandre Torgue <[email protected]>Cc Maxime Coquelin <[email protected]>Cc Patrice Chotard <[email protected]>Cc Patrick Delaunay <[email protected]>Cc Rob Herring <[email protected]>
Quoted 8 lines
To: [email protected]
---
V2: Split DHCOM and DHCOR SoM entries
V3: No change--- Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)