Skip to contentSkip to conversation

Rewrite jevents program in python

PATCH Superseded Ian Rogers 2 participants 11 messages Jun 27, 2022 – Jun 30, 2022 perf events

v6 of 7 Superseded Latest is v7 →

lore
Share & tools
lore

Ian Rogers

author reviewer
#0 lore raw

v6 cover Rewrite jevents program in python

New architectures bring new complexity, such as Intel's hybrid models. jevents provides an alternative to specifying events in the kernel and exposing them through sysfs, however, it is difficult to work with. For example, an error in the json input would yield an error message but no json file or location. It is also a challenge to update jsmn.c given its forked nature.

The changes here switch from jevents.c to a rewrite in python called jevents.py. This means there is a build time dependency on python, but such a dependency already exists for asciidoc (used to generate perf's man pages). If the build detects that python isn't present or is older than version 3.6 (released Dec. 2016) then an empty file is substituted for the generated one.

A challenge with this code is in avoiding regressions. For this reason the jevents.py produces identical output to jevents.c, validated with a test script and build target.

v6. Adds Tested-by from Zhengjun Xing <[email protected]>
and Thomas Richter <[email protected]>. Fixes issues spotted by Jiri Olsa <[email protected]>, jsmn.c wasn't deleted and the empty pmu-events.c didn't pass the pmu-events test. It also adds a missing mkdir which is necessary before creating pmu-events.c and tweaks the quiet display code in the empty case to display a gen.
v5. Adds a 2>/dev/null as suggested by David Laight
<[email protected]>.
v4. Fixes the build for systems with python2 installed by adding a
patch that makes python3 the preferred python (Reported-by: John Garry <[email protected]>). It also fixes a bash-ism in the jevents-test.sh and fixes the handling of an empty string for a metric BriefDescription as one was added for sapphirerapids in the metric Execute.
v3. Updates the patches for merged changes (on
acme/tmp.perf/core). Re-runs all comparisons to make sure the generated pmu-events.c isn't altered at all by this change. Adds the jevents.c ExtSel fix in:
https://lore.kernel.org/lkml/[email protected]/
Bumps the python version from 3.5 to 3.6, as f-strings weren't introduced until 3.6.

v2. Fixes the build for architectures that don't have pmu-events json
(Suggested-by: John Garry <[email protected]>) and fixes the build for python not being present or too old (Suggested-by: Peter Zijlstra <[email protected]>/John Garry <[email protected]>).

Ian Rogers (4):
perf python: Prefer python3
perf jevents: Add python converter script
perf jevents: Switch build to use jevents.py
perf jevents: Remove jevents.c

 tools/perf/Makefile.config               |   27 +-
 tools/perf/Makefile.perf                 |   16 +-
 tools/perf/pmu-events/Build              |   17 +-
 tools/perf/pmu-events/empty-pmu-events.c |  158 +++
 tools/perf/pmu-events/jevents.c          | 1342 ----------------------
 tools/perf/pmu-events/jevents.py         |  409 +++++++
 tools/perf/pmu-events/jsmn.c             |  352 ------
 tools/perf/pmu-events/jsmn.h             |   68 --
 tools/perf/pmu-events/json.c             |  162 ---
 tools/perf/pmu-events/json.h             |   39 -
 10 files changed, 604 insertions(+), 1986 deletions(-)
 create mode 100644 tools/perf/pmu-events/empty-pmu-events.c
 delete mode 100644 tools/perf/pmu-events/jevents.c
 create mode 100755 tools/perf/pmu-events/jevents.py
 delete mode 100644 tools/perf/pmu-events/jsmn.c
 delete mode 100644 tools/perf/pmu-events/jsmn.h
 delete mode 100644 tools/perf/pmu-events/json.c
 delete mode 100644 tools/perf/pmu-events/json.h
Signature · 1 line
2.37.0.rc0.161.g10f37bed90-goog
author reviewer
#1 lore raw

PATCH v6 1/4 perf python: Prefer python3

From: Ian Rogers <[email protected]>

The PYTHON_AUTO code orders the preference for the PYTHON command to be python3, python and then python2. python3 makes a more logical preference as python2 is no longer supported:
https://www.python.org/doc/sunset-python-2/

Reorder the priority of the PYTHON command to be python2, python and then python3.

---
 tools/perf/Makefile.config | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
tools/perf/Makefile.config +4 -4
index 73e0762092fe..16c1a87444b8 100644
@@ -241,15 +241,15 @@ endif
 # Try different combinations to accommodate systems that only have
 # python[2][3]-config in weird combinations in the following order of
 # priority from lowest to highest:
-#   * python3-config
-#   * python-config
 #   * python2-config as per pep-0394.
+#   * python-config
+#   * python3-config
 #   * $(PYTHON)-config (If PYTHON is user supplied but PYTHON_CONFIG isn't)
 #
 PYTHON_AUTO := python-config
-PYTHON_AUTO := $(if $(call get-executable,python3-config),python3-config,$(PYTHON_AUTO))
-PYTHON_AUTO := $(if $(call get-executable,python-config),python-config,$(PYTHON_AUTO))
 PYTHON_AUTO := $(if $(call get-executable,python2-config),python2-config,$(PYTHON_AUTO))
+PYTHON_AUTO := $(if $(call get-executable,python-config),python-config,$(PYTHON_AUTO))
+PYTHON_AUTO := $(if $(call get-executable,python3-config),python3-config,$(PYTHON_AUTO))
 
 # If PYTHON is defined but PYTHON_CONFIG isn't, then take $(PYTHON)-config as if it was the user
 # supplied value for PYTHON_CONFIG. Because it's "user supplied", error out if it doesn't exist.
Signature · 1 line
2.37.0.rc0.161.g10f37bed90-goog
author reviewer
#2 lore raw

PATCH v6 2/4 perf jevents: Add python converter script

In reply to Ian Rogers

From: Ian Rogers <[email protected]>

jevents.c is large, has a dependency on an old forked version of jsmn, and is challenging to work upon. A lot of jevents.c's complexity comes from needing to write json and csv parsing from first principles. In contrast python has this functionality in standard libraries and is already a build pre-requisite for tools like asciidoc (that builds all of the perf man pages).

Introduce jevents.py that produces identical output to jevents.c. Add a test that runs both converter tools and validates there are no output differences. The test can be invoked with a phony build target like:

make -C tools/perf jevents-py-test

The python code deliberately tries to replicate the behavior of jevents.c so that the output matches and transitioning tools shouldn't introduce regressions. In some cases the code isn't as elegant as hoped, but fixing this can be done as follow up.

---
 tools/perf/Makefile.perf              |   6 +
 tools/perf/pmu-events/jevents-test.sh |  33 +++
 tools/perf/pmu-events/jevents.py      | 409 ++++++++++++++++++++++++++
 3 files changed, 448 insertions(+)
 create mode 100755 tools/perf/pmu-events/jevents-test.sh
 create mode 100755 tools/perf/pmu-events/jevents.py
tools/perf/Makefile.perf +6 -0
index 8f738e11356d..1e29c8936f71 100644
@@ -669,6 +669,12 @@ $(JEVENTS_IN): FORCE
 $(JEVENTS): $(JEVENTS_IN)
 	$(QUIET_LINK)$(HOSTCC) $(JEVENTS_IN) -o $@
 
+JEVENTS_PY	:=  pmu-events/jevents.py
+JEVENTS_PY_TEST	:=  pmu-events/jevents-test.sh
+.PHONY: jevents-py-test
+jevents-py-test: $(JEVENTS)
+	$(Q)$(call echo-cmd,gen)$(JEVENTS_PY_TEST) $(JEVENTS) $(JEVENTS_PY) pmu-events/arch
+
 $(PMU_EVENTS_IN): $(JEVENTS) FORCE
 	$(Q)$(MAKE) -f $(srctree)/tools/build/Makefile.build dir=pmu-events obj=pmu-events
 
tools/perf/pmu-events/jevents-test.sh new file +33 -0
new file mode 100755
index 000000000000..9ae852292576
@@ -0,0 +1,33 @@
+#!/bin/sh
+# SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
+# Validate that the legacy jevents and jevents.py produce identical output.
+set -e
+
+JEVENTS="$1"
+JEVENTS_PY="$2"
+ARCH_PATH="$3"
+JEVENTS_C_GENERATED=$(mktemp /tmp/jevents_c.XXXXX.c)
+JEVENTS_PY_GENERATED=$(mktemp /tmp/jevents_py.XXXXX.c)
+
+cleanup() {
+  rm "$JEVENTS_C_GENERATED" "$JEVENTS_PY_GENERATED"
+  trap - exit term int
+}
+trap cleanup exit term int
+
+for path in "$ARCH_PATH"/*
+do
+  arch=$(basename $path)
+  if [ "$arch" = "test" ]
+  then
+    continue
+  fi
+  echo "Checking architecture: $arch"
+  echo "Generating using jevents.c"
+  "$JEVENTS" "$arch" "$ARCH_PATH" "$JEVENTS_C_GENERATED"
+  echo "Generating using jevents.py"
+  "$JEVENTS_PY" "$arch" "$ARCH_PATH" "$JEVENTS_PY_GENERATED"
+  echo "Diffing"
+  diff -u "$JEVENTS_C_GENERATED" "$JEVENTS_PY_GENERATED"
+done
+cleanup
tools/perf/pmu-events/jevents.py new file +409 -0

409 lines not on this page · raw message

Signature · 1 line
2.37.0.rc0.161.g10f37bed90-goog
#3 lore raw

Re: [PATCH v6 2/4] perf jevents: Add python converter script

tools/perf/pmu-events/jevents.py line 103

Quoted 7 lines · Ian Rogers
tools/perf/pmu-events/jevents.py new file +7 -0
+
+    def unit_to_pmu(unit: str) -> str:
+      """Convert a JSON Unit to Linux PMU name."""
+      if not unit:
+        return None
+      # Comment brought over from jevents.c:
+      # it's not realistic to keep adding these, we need something more scalable ...

Since we're converting to python it might be a good idea to consider this - ever have an ideas on something better?

Thanks,
John

Quoted 20 lines
tools/perf/pmu-events/jevents.py new file +20 -0
+      table = {
+          'CBO': 'uncore_cbox',
+          'QPI LL': 'uncore_qpi',
+          'SBO': 'uncore_sbox',
+          'iMPH-U': 'uncore_arb',
+          'CPU-M-CF': 'cpum_cf',
+          'CPU-M-SF': 'cpum_sf',
+          'UPI LL': 'uncore_upi',
+          'hisi_sicl,cpa': 'hisi_sicl,cpa',
+          'hisi_sccl,ddrc': 'hisi_sccl,ddrc',
+          'hisi_sccl,hha': 'hisi_sccl,hha',
+          'hisi_sccl,l3c': 'hisi_sccl,l3c',
+          'imx8_ddr': 'imx8_ddr',
+          'L3PMC': 'amd_l3',
+          'DFPMC': 'amd_df',
+          'cpu_core': 'cpu_core',
+          'cpu_atom': 'cpu_atom',
+      }
+      return table[unit] if unit in table else f'uncore_{unit.lower()}'
+
author reviewer
#4 lore raw

Re: [PATCH v6 2/4] perf jevents: Add python converter script

Quoted 10 lines · John Garry

tools/perf/pmu-events/jevents.py line 103

Quoted 7 lines · Ian Rogers
tools/perf/pmu-events/jevents.py new file +7 -0
+
+    def unit_to_pmu(unit: str) -> str:
+      """Convert a JSON Unit to Linux PMU name."""
+      if not unit:
+        return None
+      # Comment brought over from jevents.c:
+      # it's not realistic to keep adding these, we need something more scalable ...
Quoted 2 lines

Since we're converting to python it might be a good idea to consider this - ever have an ideas on something better?

I think it is something ripe for cleanup, no particular thoughts on this case. I'd like to make it so that jevents/pmu-events is aligned with sysfs, which this relates to.

Thanks,
Ian

Quoted 24 lines

Thanks,
John

Quoted 20 lines
tools/perf/pmu-events/jevents.py new file +20 -0
+      table = {
+          'CBO': 'uncore_cbox',
+          'QPI LL': 'uncore_qpi',
+          'SBO': 'uncore_sbox',
+          'iMPH-U': 'uncore_arb',
+          'CPU-M-CF': 'cpum_cf',
+          'CPU-M-SF': 'cpum_sf',
+          'UPI LL': 'uncore_upi',
+          'hisi_sicl,cpa': 'hisi_sicl,cpa',
+          'hisi_sccl,ddrc': 'hisi_sccl,ddrc',
+          'hisi_sccl,hha': 'hisi_sccl,hha',
+          'hisi_sccl,l3c': 'hisi_sccl,l3c',
+          'imx8_ddr': 'imx8_ddr',
+          'L3PMC': 'amd_l3',
+          'DFPMC': 'amd_df',
+          'cpu_core': 'cpu_core',
+          'cpu_atom': 'cpu_atom',
+      }
+      return table[unit] if unit in table else f'uncore_{unit.lower()}'
+
#5 lore raw

Re: [PATCH v6 2/4] perf jevents: Add python converter script

Quoted 6 lines · Ian Rogers
Quoted 3 lines
Quoted 1 line

+ # it's not realistic to keep adding these, we need something more scalable ...

Since we're converting to python it might be a good idea to consider this - ever have an ideas on something better?

I think it is something ripe for cleanup, no particular thoughts on this case. I'd like to make it so that jevents/pmu-events is aligned with sysfs, which this relates to.

Right, I know that you sent a big mail on that and I never really checked it in detail - sorry. Let me look again.

thanks,
John

author reviewer
#6 lore raw

PATCH v6 3/4 perf jevents: Switch build to use jevents.py

In reply to Ian Rogers

From: Ian Rogers <[email protected]>

Generate pmu-events.c using jevents.py rather than the binary built from jevents.c. Add a new config variable NO_JEVENTS that is set when there is no architecture json or an appropriate python interpreter isn't present. When NO_JEVENTS is defined the file pmu-events/empty-pmu-events.c is copied and used as the pmu-events.c file.

---
 tools/perf/Makefile.config               |  19 +++
 tools/perf/Makefile.perf                 |   1 +
 tools/perf/pmu-events/Build              |  13 +-
 tools/perf/pmu-events/empty-pmu-events.c | 158 +++++++++++++++++++++++
 4 files changed, 189 insertions(+), 2 deletions(-)
 create mode 100644 tools/perf/pmu-events/empty-pmu-events.c
tools/perf/Makefile.config +19 -0
index 16c1a87444b8..153c18909ff5 100644
@@ -889,6 +889,25 @@ else
   endif
 endif
 
+ifneq ($(NO_JEVENTS),1)
+  ifeq ($(wildcard pmu-events/arch/$(SRCARCH)/mapfile.csv),)
+    NO_JEVENTS := 1
+  endif
+endif
+ifneq ($(NO_JEVENTS),1)
+  NO_JEVENTS := 0
+  ifndef PYTHON
+    $(warning No python interpreter disabling jevent generation)
+    NO_JEVENTS := 1
+  else
+    # jevents.py uses f-strings present in Python 3.6 released in Dec. 2016.
+    JEVENTS_PYTHON_GOOD := $(shell $(PYTHON) -c 'import sys;print("1" if(sys.version_info.major >= 3 and sys.version_info.minor >= 6) else "0")' 2> /dev/null)
+    ifneq ($(JEVENTS_PYTHON_GOOD), 1)
+      $(warning Python interpreter too old (older than 3.6) disabling jevent generation)
+      NO_JEVENTS := 1
+    endif
+  endif
+endif
 
 ifndef NO_LIBBFD
   ifeq ($(feature-libbfd), 1)
tools/perf/Makefile.perf +1 -0
index 1e29c8936f71..dc6b177ac1de 100644
@@ -655,6 +655,7 @@ JEVENTS       := $(OUTPUT)pmu-events/jevents
 JEVENTS_IN    := $(OUTPUT)pmu-events/jevents-in.o
 
 PMU_EVENTS_IN := $(OUTPUT)pmu-events/pmu-events-in.o
+export NO_JEVENTS
 
 export JEVENTS
 
tools/perf/pmu-events/Build +11 -2
index a055dee6a46a..5ec5ce8c31ba 100644
@@ -9,10 +9,19 @@ JSON		=  $(shell [ -d $(JDIR) ] &&				\
 JDIR_TEST	=  pmu-events/arch/test
 JSON_TEST	=  $(shell [ -d $(JDIR_TEST) ] &&			\
 			find $(JDIR_TEST) -name '*.json')
+JEVENTS_PY	=  pmu-events/jevents.py
 
 #
 # Locate/process JSON files in pmu-events/arch/
 # directory and create tables in pmu-events.c.
 #
-$(OUTPUT)pmu-events/pmu-events.c: $(JSON) $(JSON_TEST) $(JEVENTS)
-	$(Q)$(call echo-cmd,gen)$(JEVENTS) $(SRCARCH) pmu-events/arch $(OUTPUT)pmu-events/pmu-events.c $(V)
+
+ifeq ($(NO_JEVENTS),1)
+$(OUTPUT)pmu-events/pmu-events.c: pmu-events/empty-pmu-events.c
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)cp $< $@
+else
+$(OUTPUT)pmu-events/pmu-events.c: $(JSON) $(JSON_TEST) $(JEVENTS_PY)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(PYTHON) $(JEVENTS_PY) $(SRCARCH) pmu-events/arch $@
+endif
tools/perf/pmu-events/empty-pmu-events.c new file +158 -0

158 lines not on this page · raw message

Signature · 1 line
2.37.0.rc0.161.g10f37bed90-goog
author reviewer
#7 lore raw

PATCH v6 4/4 perf jevents: Remove jevents.c

In reply to Ian Rogers

From: Ian Rogers <[email protected]>

Remove files and build rules.
Remove test for comparing with jevents.py as there is no longer a binary to compare with.

---
 tools/perf/Makefile.perf              |   21 +-
 tools/perf/pmu-events/Build           |    4 -
 tools/perf/pmu-events/jevents-test.sh |   33 -
 tools/perf/pmu-events/jevents.c       | 1342 -------------------------
 tools/perf/pmu-events/jsmn.c          |  352 -------
 tools/perf/pmu-events/jsmn.h          |   68 --
 tools/perf/pmu-events/json.c          |  162 ---
 tools/perf/pmu-events/json.h          |   39 -
 8 files changed, 2 insertions(+), 2019 deletions(-)
 delete mode 100755 tools/perf/pmu-events/jevents-test.sh
 delete mode 100644 tools/perf/pmu-events/jevents.c
 delete mode 100644 tools/perf/pmu-events/jsmn.c
 delete mode 100644 tools/perf/pmu-events/jsmn.h
 delete mode 100644 tools/perf/pmu-events/json.c
 delete mode 100644 tools/perf/pmu-events/json.h
tools/perf/Makefile.perf +2 -19
index dc6b177ac1de..8f0b1fb39984 100644
@@ -651,32 +651,15 @@ strip: $(PROGRAMS) $(OUTPUT)perf
 
 PERF_IN := $(OUTPUT)perf-in.o
 
-JEVENTS       := $(OUTPUT)pmu-events/jevents
-JEVENTS_IN    := $(OUTPUT)pmu-events/jevents-in.o
-
 PMU_EVENTS_IN := $(OUTPUT)pmu-events/pmu-events-in.o
 export NO_JEVENTS
 
-export JEVENTS
-
 build := -f $(srctree)/tools/build/Makefile.build dir=. obj
 
 $(PERF_IN): prepare FORCE
 	$(Q)$(MAKE) $(build)=perf
 
-$(JEVENTS_IN): FORCE
-	$(Q)$(MAKE) -f $(srctree)/tools/build/Makefile.build dir=pmu-events obj=jevents
-
-$(JEVENTS): $(JEVENTS_IN)
-	$(QUIET_LINK)$(HOSTCC) $(JEVENTS_IN) -o $@
-
-JEVENTS_PY	:=  pmu-events/jevents.py
-JEVENTS_PY_TEST	:=  pmu-events/jevents-test.sh
-.PHONY: jevents-py-test
-jevents-py-test: $(JEVENTS)
-	$(Q)$(call echo-cmd,gen)$(JEVENTS_PY_TEST) $(JEVENTS) $(JEVENTS_PY) pmu-events/arch
-
-$(PMU_EVENTS_IN): $(JEVENTS) FORCE
+$(PMU_EVENTS_IN): FORCE
 	$(Q)$(MAKE) -f $(srctree)/tools/build/Makefile.build dir=pmu-events obj=pmu-events
 
 $(OUTPUT)perf: $(PERFLIBS) $(PERF_IN) $(PMU_EVENTS_IN) $(LIBTRACEEVENT_DYNAMIC_LIST)
@@ -1096,7 +1079,7 @@ clean:: $(LIBTRACEEVENT)-clean $(LIBAPI)-clean $(LIBBPF)-clean $(LIBSUBCMD)-clea
 	$(call QUIET_CLEAN, core-objs)  $(RM) $(LIBPERF_A) $(OUTPUT)perf-archive $(OUTPUT)perf-iostat $(LANG_BINDINGS)
 	$(Q)find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete
 	$(Q)$(RM) $(OUTPUT).config-detected
-	$(call QUIET_CLEAN, core-progs) $(RM) $(ALL_PROGRAMS) perf perf-read-vdso32 perf-read-vdsox32 $(OUTPUT)pmu-events/jevents $(OUTPUT)$(LIBJVMTI).so
+	$(call QUIET_CLEAN, core-progs) $(RM) $(ALL_PROGRAMS) perf perf-read-vdso32 perf-read-vdsox32 $(OUTPUT)$(LIBJVMTI).so
 	$(call QUIET_CLEAN, core-gen)   $(RM)  *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope* $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)FEATURE-DUMP $(OUTPUT)util/*-bison* $(OUTPUT)util/*-flex* \
 		$(OUTPUT)util/intel-pt-decoder/inat-tables.c \
 		$(OUTPUT)tests/llvm-src-{base,kbuild,prologue,relocation}.c \
tools/perf/pmu-events/Build +0 -4
index 5ec5ce8c31ba..28a9d01b08af 100644
@@ -1,7 +1,3 @@
-hostprogs := jevents
-
-jevents-y	+= json.o jsmn.o jevents.o
-HOSTCFLAGS_jevents.o	= -I$(srctree)/tools/include
 pmu-events-y	+= pmu-events.o
 JDIR		=  pmu-events/arch/$(SRCARCH)
 JSON		=  $(shell [ -d $(JDIR) ] &&				\
tools/perf/pmu-events/jevents-test.sh deleted +0 -33
deleted file mode 100755
index 9ae852292576..000000000000
@@ -1,33 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
-# Validate that the legacy jevents and jevents.py produce identical output.
-set -e
-
-JEVENTS="$1"
-JEVENTS_PY="$2"
-ARCH_PATH="$3"
-JEVENTS_C_GENERATED=$(mktemp /tmp/jevents_c.XXXXX.c)
-JEVENTS_PY_GENERATED=$(mktemp /tmp/jevents_py.XXXXX.c)
-
-cleanup() {
-  rm "$JEVENTS_C_GENERATED" "$JEVENTS_PY_GENERATED"
-  trap - exit term int
-}
-trap cleanup exit term int
-
-for path in "$ARCH_PATH"/*
-do
-  arch=$(basename $path)
-  if [ "$arch" = "test" ]
-  then
-    continue
-  fi
-  echo "Checking architecture: $arch"
-  echo "Generating using jevents.c"
-  "$JEVENTS" "$arch" "$ARCH_PATH" "$JEVENTS_C_GENERATED"
-  echo "Generating using jevents.py"
-  "$JEVENTS_PY" "$arch" "$ARCH_PATH" "$JEVENTS_PY_GENERATED"
-  echo "Diffing"
-  diff -u "$JEVENTS_C_GENERATED" "$JEVENTS_PY_GENERATED"
-done
-cleanup
tools/perf/pmu-events/jevents.c deleted +0 -1342

1,342 lines not on this page · raw message

tools/perf/pmu-events/jsmn.c deleted +0 -352

352 lines not on this page · raw message

tools/perf/pmu-events/jsmn.h deleted +0 -68

68 lines not on this page · raw message

tools/perf/pmu-events/json.c deleted +0 -162

162 lines not on this page · raw message

tools/perf/pmu-events/json.h deleted +0 -39
deleted file mode 100644
index fbcd5a0590ad..000000000000
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef JSON_H
-#define JSON_H 1
-
-#include "jsmn.h"
-
-jsmntok_t *parse_json(const char *fn, char **map, size_t *size, int *len);
-void free_json(char *map, size_t size, jsmntok_t *tokens);
-int json_line(char *map, jsmntok_t *t);
-const char *json_name(jsmntok_t *t);
-int json_streq(char *map, jsmntok_t *t, const char *s);
-int json_len(jsmntok_t *t);
-
-extern int verbose;
-
-#include <stdbool.h>
-
-extern int eprintf(int level, int var, const char *fmt, ...);
-#define pr_fmt(fmt)	fmt
-
-#define pr_err(fmt, ...) \
-	eprintf(0, verbose, pr_fmt(fmt), ##__VA_ARGS__)
-
-#define pr_info(fmt, ...) \
-	eprintf(1, verbose, pr_fmt(fmt), ##__VA_ARGS__)
-
-#define pr_debug(fmt, ...) \
-	eprintf(2, verbose, pr_fmt(fmt), ##__VA_ARGS__)
-
-#ifndef roundup
-#define roundup(x, y) (                                \
-{                                                      \
-        const typeof(y) __y = y;                       \
-        (((x) + (__y - 1)) / __y) * __y;               \
-}                                                      \
-)
-#endif
-
-#endif
Signature · 1 line
2.37.0.rc0.161.g10f37bed90-goog
#8 lore raw
In reply to Ian Rogers
Quoted 11 lines · Ian Rogers

A challenge with this code is in avoiding regressions. For this reason the jevents.py produces identical output to jevents.c, validated with a test script and build target.

v6. Adds Tested-by from Zhengjun Xing<[email protected]>
and Thomas Richter<[email protected]>. Fixes issues spotted by Jiri Olsa<[email protected]>, jsmn.c wasn't deleted and the empty pmu-events.c didn't pass the pmu-events test. It also adds a missing mkdir which is necessary before creating pmu-events.c and tweaks the quiet display code in the empty case to display a gen.
v5. Adds a 2>/dev/null as suggested by David Laight

Hmmm... shouldn't this be v7? Anyway what I got with message-id [email protected] now seems to build and the output looks ok.

Thanks,
John

author reviewer
#9 lore raw
Quoted 15 lines · John Garry
Quoted 11 lines · Ian Rogers

A challenge with this code is in avoiding regressions. For this reason the jevents.py produces identical output to jevents.c, validated with a test script and build target.

v6. Adds Tested-by from Zhengjun Xing<[email protected]>
and Thomas Richter<[email protected]>. Fixes issues spotted by Jiri Olsa<[email protected]>, jsmn.c wasn't deleted and the empty pmu-events.c didn't pass the pmu-events test. It also adds a missing mkdir which is necessary before creating pmu-events.c and tweaks the quiet display code in the empty case to display a gen.
v5. Adds a 2>/dev/null as suggested by David Laight

Quoted 6 lines

Hmmm... shouldn't this be v7? Anyway what I got with message-id [email protected] now seems to build and the output looks ok.

Thanks,
John

Thanks John, I think I've confused myself by working on greater than 1 machine wrt version numbers. I can re-send as v7, would it be okay to put on a Tested-by: John Garry <[email protected]> ?

Ian

Tested-by
#10 lore raw
Quoted 20 lines · Ian Rogers
Quoted 19 lines · John Garry
Quoted 11 lines · Ian Rogers

A challenge with this code is in avoiding regressions. For this reason the jevents.py produces identical output to jevents.c, validated with a test script and build target.

v6. Adds Tested-by from Zhengjun Xing<[email protected]>
and Thomas Richter<[email protected]>. Fixes issues spotted by Jiri Olsa<[email protected]>, jsmn.c wasn't deleted and the empty pmu-events.c didn't pass the pmu-events test. It also adds a missing mkdir which is necessary before creating pmu-events.c and tweaks the quiet display code in the empty case to display a gen.
v5. Adds a 2>/dev/null as suggested by David Laight

Hmmm... shouldn't this be v7? Anyway what I got with message-id [email protected] now seems to build and the output looks ok.

Quoted 7 lines
Quoted 2 lines

Thanks,
John

Thanks John, I think I've confused myself by working on greater than 1 machine wrt version numbers. I can re-send as v7, would it be okay to put on a Tested-by: John Garry <[email protected]> ?

Sure,

Quoted 1 line

.