Skip to contentSkip to conversation

linux-ti-staging: Unblock SA2UL for AM64x and J7200 HS devices

PATCH In review Andrew Davis 2 participants 3 messages Jun 28, 2022 – Jun 30, 2022

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 linux-ti-staging: Unblock SA2UL for AM64x and J7200 HS devices

The SA2UL driver now works on HS devices, unblock this.

---
 recipes-kernel/linux/linux-ti-staging_5.10.bb | 6 ------
 1 file changed, 6 deletions(-)
recipes-kernel/linux/linux-ti-staging_5.10.bb +0 -6
index 75ffa904..59094a9e 100644
@@ -45,9 +45,3 @@ module_conf_ti_k3_r5_remoteproc = "softdep ti_k3_r5_remoteproc pre: virtio_rpmsg
 module_conf_ti_k3_dsp_remoteproc = "softdep ti_k3_dsp_remoteproc pre: virtio_rpmsg_bus"
 KERNEL_MODULE_PROBECONF += "rpmsg_client_sample ti_k3_r5_remoteproc ti_k3_dsp_remoteproc"
 KERNEL_MODULE_AUTOLOAD_append_j7 = " rpmsg_kdrv_switch"
-
-# Disable SA2UL for AM64x HS and J7200 HS
-module_conf_sa2ul_am64xx-hs-evm = "blacklist sa2ul"
-KERNEL_MODULE_PROBECONF_append_am64xx-hs-evm = " sa2ul"
-module_conf_sa2ul_j7200-hs-evm = "blacklist sa2ul"
-KERNEL_MODULE_PROBECONF_append_j7200-hs-evm = " sa2ul"
Signature · 1 line
2.36.1
Reviewed-by on v1 1/1
#1 lore raw

Andrew,

assuming this is applicable for master branch as well.

Quoted 3 lines · Andrew Davis via lists.yoctoproject.org

The SA2UL driver now works on HS devices, unblock this.

Quoted 29 lines
---
  recipes-kernel/linux/linux-ti-staging_5.10.bb | 6 ------
  1 file changed, 6 deletions(-)
recipes-kernel/linux/linux-ti-staging_5.10.bb +0 -7
index 75ffa904..59094a9e 100644
@@ -45,9 +45,3 @@ module_conf_ti_k3_r5_remoteproc = "softdep ti_k3_r5_remoteproc pre: virtio_rpmsg
  module_conf_ti_k3_dsp_remoteproc = "softdep ti_k3_dsp_remoteproc pre: virtio_rpmsg_bus"
  KERNEL_MODULE_PROBECONF += "rpmsg_client_sample ti_k3_r5_remoteproc ti_k3_dsp_remoteproc"
  KERNEL_MODULE_AUTOLOAD_append_j7 = " rpmsg_kdrv_switch"
-
-# Disable SA2UL for AM64x HS and J7200 HS
-module_conf_sa2ul_am64xx-hs-evm = "blacklist sa2ul"
-KERNEL_MODULE_PROBECONF_append_am64xx-hs-evm = " sa2ul"
-module_conf_sa2ul_j7200-hs-evm = "blacklist sa2ul"
-KERNEL_MODULE_PROBECONF_append_j7200-hs-evm = " sa2ul"
 
 
 
-=-=-=-=-=-=-=-=-=-=-=-

Links: You receive all messages sent to this group.
View/Reply Online (#14846): https://lists.yoctoproject.org/g/meta-ti/message/14846
Mute This Topic: https://lists.yoctoproject.org/mt/92052612/2167429
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

#2 lore raw
Quoted 4 lines · Praneeth

Andrew,

assuming this is applicable for master branch as well.

I'd think so yes, I've been a bit time crunched lately so not been testing these against master. Plan was to go back later and check all my patches that didn't get synced to master and resend as needed.

Andrew

Quoted 36 lines · Andrew Davis via lists.yoctoproject.org
Quoted 3 lines

The SA2UL driver now works on HS devices, unblock this.

Quoted 29 lines

---
  recipes-kernel/linux/linux-ti-staging_5.10.bb | 6 ------

  1 file changed, 6 deletions(-)
recipes-kernel/linux/linux-ti-staging_5.10.bb +0 -0
index 75ffa904..59094a9e 100644
@@ -45,9 +45,3 @@ module_conf_ti_k3_r5_remoteproc = "softdep ti_k3_r5_remoteproc pre: virtio_rpmsg

  module_conf_ti_k3_dsp_remoteproc = "softdep ti_k3_dsp_remoteproc pre: virtio_rpmsg_bus" KERNEL_MODULE_PROBECONF += "rpmsg_client_sample ti_k3_r5_remoteproc ti_k3_dsp_remoteproc" KERNEL_MODULE_AUTOLOAD_append_j7 = " rpmsg_kdrv_switch"

recipes-kernel/linux/linux-ti-staging_5.10.bb +0 -7
-
-# Disable SA2UL for AM64x HS and J7200 HS
-module_conf_sa2ul_am64xx-hs-evm = "blacklist sa2ul"
-KERNEL_MODULE_PROBECONF_append_am64xx-hs-evm = " sa2ul"
-module_conf_sa2ul_j7200-hs-evm = "blacklist sa2ul"
-KERNEL_MODULE_PROBECONF_append_j7200-hs-evm = " sa2ul"
 
 
 
-=-=-=-=-=-=-=-=-=-=-=-

Links: You receive all messages sent to this group.
View/Reply Online (#14846): https://lists.yoctoproject.org/g/meta-ti/message/14846
Mute This Topic: https://lists.yoctoproject.org/mt/92052612/2167429
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-