Skip to contentSkip to conversation

kunit: tool: Enable virtio/PCI by default on UML

PATCH In review David Gow 2 participants 2 messages Jun 28, 2022 – Jul 6, 2022

Subsystems (2)
lore
Share & tools
lore

David Gow

author
#0 lore raw

PATCH v2 1/1 kunit: tool: Enable virtio/PCI by default on UML

There are several tests which depend on PCI, and hence need a bunch of extra options to run under UML. This makes it awkward to give configuration instructions (whether in documentation, or as part of a .kunitconfig file), as two separate, incompatible sets of config options are required for UML and "most other architectures".

For non-UML architectures, it's possible to add default kconfig options via the qemu_config python files, but there's no equivalent for UML. Add a new tools/testing/kunit/configs/arch_uml.config file containing extra kconfig options to use on UML.

---

NOTE: This depends on the refactor kconfig handling & repeatable --kunitconfig series here:
https://lore.kernel.org/linux-kselftest/[email protected]/T/
https://patchwork.kernel.org/project/linux-kselftest/list/?series=654332
Please apply those first.

Changes since v1:
https://lore.kernel.org/linux-kselftest/[email protected]/
- (Hopefully) fix a pytype warning re: architecture being None in the tests. (Thanks, Daniel)
- Rebase on top of the new combined v3 of the kconfig/kunitconfig patchset.
- Add José's Tested-by and Daniel's Reviewed-by.

Changes since RFC:
https://lore.kernel.org/linux-kselftest/[email protected]/
- Rebase on top of the previous kconfig patches.
- Fix a missing make_arch_qemuconfig->make_arch_config rename (Thanks Brendan)
- Fix the tests to use the base LinuxSourceTreeOperations class, which has no default kconfig options (and so won't conflict with those set in the tests). Only test_build_reconfig_existing_config actually failed, but I updated a few more in case the defaults changed.

---
 tools/testing/kunit/configs/arch_uml.config |  5 +++++
 tools/testing/kunit/kunit_kernel.py         | 14 ++++++++++----
 tools/testing/kunit/kunit_tool_test.py      | 12 ++++++++++++
 3 files changed, 27 insertions(+), 4 deletions(-)
 create mode 100644 tools/testing/kunit/configs/arch_uml.config
tools/testing/kunit/configs/arch_uml.config new file +5 -0
new file mode 100644
index 000000000000..e824ce43b05a
@@ -0,0 +1,5 @@
+# Config options which are added to UML builds by default
+
+# Enable virtio/pci, as a lot of tests require it.
+CONFIG_VIRTIO_UML=y
+CONFIG_UML_PCI_OVER_VIRTIO=y
tools/testing/kunit/kunit_kernel.py +10 -4
index f65c996127c3..2698d4c51e6e 100644
@@ -26,6 +26,7 @@ KUNITCONFIG_PATH = '.kunitconfig'
 OLD_KUNITCONFIG_PATH = 'last_used_kunitconfig'
 DEFAULT_KUNITCONFIG_PATH = 'tools/testing/kunit/configs/default.config'
 BROKEN_ALLCONFIG_PATH = 'tools/testing/kunit/configs/broken_on_uml.config'
+UML_KCONFIG_PATH = 'tools/testing/kunit/configs/arch_uml.config'
 OUTFILE_PATH = 'test.log'
 ABS_TOOL_PATH = os.path.abspath(os.path.dirname(__file__))
 QEMU_CONFIGS_DIR = os.path.join(ABS_TOOL_PATH, 'qemu_configs')
@@ -53,7 +54,7 @@ class LinuxSourceTreeOperations:
 		except subprocess.CalledProcessError as e:
 			raise ConfigError(e.output.decode())
 
-	def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig:
+	def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig:
 		return base_kunitconfig
 
 	def make_allyesconfig(self, build_dir: str, make_options) -> None:
@@ -109,7 +110,7 @@ class LinuxSourceTreeOperationsQemu(LinuxSourceTreeOperations):
 		self._kernel_command_line = qemu_arch_params.kernel_command_line + ' kunit_shutdown=reboot'
 		self._extra_qemu_params = qemu_arch_params.extra_qemu_params
 
-	def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig:
+	def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig:
 		kconfig = kunit_config.parse_from_string(self._kconfig)
 		kconfig.merge_in_entries(base_kunitconfig)
 		return kconfig
@@ -138,6 +139,11 @@ class LinuxSourceTreeOperationsUml(LinuxSourceTreeOperations):
 	def __init__(self, cross_compile=None):
 		super().__init__(linux_arch='um', cross_compile=cross_compile)
 
+	def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig:
+		kconfig = kunit_config.parse_file(UML_KCONFIG_PATH)
+		kconfig.merge_in_entries(base_kunitconfig)
+		return kconfig
+
 	def make_allyesconfig(self, build_dir: str, make_options) -> None:
 		kunit_parser.print_with_timestamp(
 			'Enabling all CONFIGs for UML...')
@@ -297,7 +303,7 @@ class LinuxSourceTree:
 		if build_dir and not os.path.exists(build_dir):
 			os.mkdir(build_dir)
 		try:
-			self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig)
+			self._kconfig = self._ops.make_arch_config(self._kconfig)
 			self._kconfig.write_to_file(kconfig_path)
 			self._ops.make_olddefconfig(build_dir, make_options)
 		except ConfigError as e:
@@ -328,7 +334,7 @@ class LinuxSourceTree:
 			return self.build_config(build_dir, make_options)
 
 		existing_kconfig = kunit_config.parse_file(kconfig_path)
-		self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig)
+		self._kconfig = self._ops.make_arch_config(self._kconfig)
 
 		if self._kconfig.is_subset_of(existing_kconfig) and not self._kunitconfig_changed(build_dir):
 			return True
tools/testing/kunit/kunit_tool_test.py +12 -0
index 0c5ba3ed35e6..6b8887c79c50 100755
@@ -430,6 +430,10 @@ class LinuxSourceTreeTest(unittest.TestCase):
 				f.write('CONFIG_KUNIT=y')
 
 			tree = kunit_kernel.LinuxSourceTree(build_dir)
+			# Stub out the source tree operations, so we don't have
+			# the defaults for any given architecture get in the
+			# way.
+			tree._ops = kunit_kernel.LinuxSourceTreeOperations('none', None)
 			mock_build_config = mock.patch.object(tree, 'build_config').start()
 
 			# Should generate the .config
@@ -447,6 +451,10 @@ class LinuxSourceTreeTest(unittest.TestCase):
 				f.write('CONFIG_KUNIT=y\nCONFIG_KUNIT_TEST=y')
 
 			tree = kunit_kernel.LinuxSourceTree(build_dir)
+			# Stub out the source tree operations, so we don't have
+			# the defaults for any given architecture get in the
+			# way.
+			tree._ops = kunit_kernel.LinuxSourceTreeOperations('none', None)
 			mock_build_config = mock.patch.object(tree, 'build_config').start()
 
 			self.assertTrue(tree.build_reconfig(build_dir, make_options=[]))
@@ -463,6 +471,10 @@ class LinuxSourceTreeTest(unittest.TestCase):
 				f.write('CONFIG_KUNIT=y\nCONFIG_KUNIT_TEST=y')
 
 			tree = kunit_kernel.LinuxSourceTree(build_dir)
+			# Stub out the source tree operations, so we don't have
+			# the defaults for any given architecture get in the
+			# way.
+			tree._ops = kunit_kernel.LinuxSourceTreeOperations('none', None)
 			mock_build_config = mock.patch.object(tree, 'build_config').start()
 
 			# ... so we should trigger a call to build_config()
Signature · 1 line
2.37.0.rc0.161.g10f37bed90-goog
Reviewed-by on v2 1/1
#1 lore raw
Quoted 7 lines · David Gow

There are several tests which depend on PCI, and hence need a bunch of extra options to run under UML. This makes it awkward to give configuration instructions (whether in documentation, or as part of a .kunitconfig file), as two separate, incompatible sets of config options are required for UML and "most other architectures".

Quoted 8 lines

For non-UML architectures, it's possible to add default kconfig options via the qemu_config python files, but there's no equivalent for UML. Add a new tools/testing/kunit/configs/arch_uml.config file containing extra kconfig options to use on UML.