arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs
Subsystems (3)
PATCH v2 1/1 arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs
AM642 SK has 8 leds connected to tpic2810 onboard. Add support for these gpio leds.
Signed-off-by Aparna M <[email protected]>
---
This patch is dependent on:
https://lore.kernel.org/all/[email protected]/
v1 -> v2: Fixed led-controller name and changed led-7 funtion to show heartbeat functionality. Rebased on top for 5.19-rc4.
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 69 ++++++++++++++++++++++++++ 1 file changed, 69 insertions(+)
arch/arm64/boot/dts/ti/k3-am642-sk.dts +69 -0
@@ -150,6 +150,67 @@ vin-supply = <&com8_ls_en>; gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>; }; + + led-controller { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + gpios = <&exp2 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-1 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + gpios = <&exp2 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + gpios = <&exp2 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-3 { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <4>; + gpios = <&exp2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-4 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <5>; + gpios = <&exp2 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-5 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <6>; + gpios = <&exp2 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-6 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <7>; + gpios = <&exp2 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-7 { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <8>; + linux,default-trigger = "heartbeat"; + gpios = <&exp2 7 GPIO_ACTIVE_HIGH>; + }; + }; }; &main_pmx0 {
@@ -316,6 +377,14 @@ "VPP_LDO_EN", "RPI_PS_3V3_En", "RPI_PS_5V0_En", "RPI_HAT_DETECT"; }; + + exp2: gpio@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8"; + }; }; &main_i2c3 {
Signature · 1 line
2.17.1
Nishanth Menon
maintainerOn 13:28-20220629, Aparna M wrote:
[...]
arch/arm64/boot/dts/ti/k3-am642-sk.dts line 387
Quoted 13 lines
&main_pmx0{arch/arm64/boot/dts/ti/k3-am642-sk.dts +8
-0@@ -316,6 +377,14 @@ "VPP_LDO_EN", "RPI_PS_3V3_En", "RPI_PS_5V0_En", "RPI_HAT_DETECT"; }; + + exp2: gpio@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8"; + };
https://lore.kernel.org/all/CACRpkdbj2B90-RE2XKQJ5qEj1hZQA-u=vUu2vpXwNqQLf_kaPg@mail.gmail.com/
I see Rob and Linus has acked it, but it does'nt belong to TI device tree queue. and I cannot pick up dts node without the compatible in master branch in rc1, so I have to skip.
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D