serial: Fix spelling mistake
PATCH 1/1 serial: Fix spelling mistake
Change 'timeing' to 'timing'.
Change 'Characteres' to 'Characters'.
Signed-off-by Zhang Jiaming <[email protected]>
--- drivers/tty/serial/8250/8250_port.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/tty/serial/8250/8250_port.c +2 -2
@@ -1510,7 +1510,7 @@ static inline void __stop_tx(struct uart_8250_port *p)if (!(lsr &UART_LSR_THRE ))return ;/* -* To provide required timeing and allow FIFO transfer, +* To provide required timing and allow FIFO transfer, * __stop_tx_rs485() must be called only when both FIFO and * shift register are empty. The device driver should either * enable interrupt on TEMT or set UART_CAP_NOTEMT that will
@@ -2796,7 +2796,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, port->read_status_mask |=UART_LSR_BI ;/* -* Characteres to ignore +* Characters to ignore */ port->ignore_status_mask =0 ;if (termios->c_iflag &IGNPAR )
Signature · 1 line
2.34.1
Quoted 4 lines · Zhang Jiaming
Change 'timeing' to 'timing'.
Change 'Characteres' to 'Characters'.Signed-off-by Zhang Jiaming <[email protected]>
Reviewed-by Ilpo Järvinen <[email protected]>
Signature · 1 line
i.