Skip to contentSkip to conversation

MIPS: mscc: ocelot: enable FDMA usage

PATCH Applied Clément Léger 3 participants 3 messages Jun 24, 2022 – Jul 5, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 MIPS: mscc: ocelot: enable FDMA usage

From: Alexandre Belloni <[email protected]>

Enable FDMA usage by adding "fdma" resource in regs and interrupts.

---
 arch/mips/boot/dts/mscc/ocelot.dtsi | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
arch/mips/boot/dts/mscc/ocelot.dtsi +5 -4
index cfc219a72bdd..6bd8a1ad94da 100644
@@ -136,13 +136,14 @@ switch@1010000 {
 			      <0x1880000 0x10000>,
 			      <0x1040000 0x10000>,
 			      <0x1050000 0x10000>,
-			      <0x1060000 0x10000>;
+			      <0x1060000 0x10000>,
+			      <0x1a0 0x1c4>;
 			reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
 				    "port2", "port3", "port4", "port5", "port6",
 				    "port7", "port8", "port9", "port10", "qsys",
-				    "ana", "s0", "s1", "s2";
-			interrupts = <18 21 22>;
-			interrupt-names = "ptp_rdy", "xtr", "inj";
+				    "ana", "s0", "s1", "s2", "fdma";
+			interrupts = <18 21 22 16>;
+			interrupt-names = "ptp_rdy", "xtr", "inj", "fdma";
 
 			ethernet-ports {
 				#address-cells = <1>;
Signature · 1 line
2.36.1
maintainer Applied
#2 lore raw
In reply to Clément Léger
Quoted 35 lines · Clément Léger

From: Alexandre Belloni <[email protected]>

Enable FDMA usage by adding "fdma" resource in regs and interrupts.

---
 arch/mips/boot/dts/mscc/ocelot.dtsi | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
arch/mips/boot/dts/mscc/ocelot.dtsi +5 -4
index cfc219a72bdd..6bd8a1ad94da 100644
@@ -136,13 +136,14 @@ switch@1010000 {
 			      <0x1880000 0x10000>,
 			      <0x1040000 0x10000>,
 			      <0x1050000 0x10000>,
-			      <0x1060000 0x10000>;
+			      <0x1060000 0x10000>,
+			      <0x1a0 0x1c4>;
 			reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
 				    "port2", "port3", "port4", "port5", "port6",
 				    "port7", "port8", "port9", "port10", "qsys",
-				    "ana", "s0", "s1", "s2";
-			interrupts = <18 21 22>;
-			interrupt-names = "ptp_rdy", "xtr", "inj";
+				    "ana", "s0", "s1", "s2", "fdma";
+			interrupts = <18 21 22 16>;
+			interrupt-names = "ptp_rdy", "xtr", "inj", "fdma";
 
 			ethernet-ports {
 				#address-cells = <1>;
Signature · 1 line
2.36.1

applied to mips-next.

Thomas.

Signature · 2 lines
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]