iommu/mediatek: Improve safety from invalid dts input
Subsystems (3)
Yong Wu
maintainerv3 cover iommu/mediatek: Improve safety from invalid dts input
This patchset contains misc improve patches. Mainly to improve safety from invalid dts input.
Change notes:
v3: a) Add platform_device_put from Robin.
b) Use component_match_add instead component_match_add_release suggested from Robin.
v2: https://lore.kernel.org/linux-mediatek/[email protected]/
a) Rebase on v5.19-rc1.
b) Add a New patch [5/5] just remove a variable that only is for v1.
v1: https://lore.kernel.org/linux-mediatek/[email protected]/
Base on linux-next-20220510.
the improve safety from dts is base on:
https://lore.kernel.org/linux-mediatek/[email protected]/Guenter Roeck (1):
iommu/mediatek: Validate number of phandles associated with
"mediatek,larbs"
Yong Wu (6):
iommu/mediatek: Use dev_err_probe to mute probe_defer err log iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data iommu/mediatek: Add platform_device_put for recovering the device
refcnt
iommu/mediatek: Use component_match_add
iommu/mediatek: Add error path for loop of mm_dts_parse iommu/mediatek: Improve safety for mediatek,smi property in larb nodes
drivers/iommu/mtk_iommu.c | 117 +++++++++++++++++++++++++++----------- 1 file changed, 84 insertions(+), 33 deletions(-)
Signature · 1 line
2.18.0
Yong Wu
maintainerPATCH v3 1/7 iommu/mediatek: Use dev_err_probe to mute probe_defer err log
Mute the probe defer log:
[ 2.654806] mtk-iommu 14018000.iommu: mm dts parse fail(-517). [ 2.656168] mtk-iommu 1c01f000.iommu: mm dts parse fail(-517).
--- drivers/iommu/mtk_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iommu/mtk_iommu.c +1 -1
@@ -1204,7 +1204,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)if (MTK_IOMMU_IS_TYPE (data->plat_data,MTK_IOMMU_TYPE_MM )) { ret =mtk_iommu_mm_dts_parse (dev, &match, data);if (ret) { -dev_err (dev,"mm dts parse fail(%d)." , ret); +dev_err_probe (dev, ret,"mm dts parse fail." ); goto out_runtime_disable; } } else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA) &&
Signature · 1 line
2.18.0
Yong Wu
maintainerPATCH v3 2/7 iommu/mediatek: Add platform_device_put for recovering the device refcnt
In reply to Yong WuAdd platform_device_put to match with of_find_device_by_node.
Meanwhile, I add a new variable "pcommdev" which is for smi common device. Otherwise, "platform_device_put(plarbdev)" for smi-common dev may be not readable. And add a checking for whether pcommdev is NULL.
--- drivers/iommu/mtk_iommu.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/iommu/mtk_iommu.c +8 -3
@@ -1045,7 +1045,7 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m struct mtk_iommu_data *data) {struct device_node *larbnode, *smicomm_node, *smi_subcomm_node; -struct platform_device *plarbdev; +struct platform_device *plarbdev, *pcommdev;struct device_link *link;int i, larb_nr, ret;
@@ -1076,12 +1076,14 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m }if (!plarbdev->dev.driver) {of_node_put (larbnode); +platform_device_put (plarbdev);return -EPROBE_DEFER ; } data->larb_imu[id].dev = &plarbdev->dev;component_match_add_release (dev, match, component_release_of, component_compare_of, larbnode); +platform_device_put (plarbdev); }/* Get smi-(sub)-common dev from the last larb. */
@@ -1099,12 +1101,15 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **melse smicomm_node = smi_subcomm_node; - plarbdev =of_find_device_by_node (smicomm_node); + pcommdev =of_find_device_by_node (smicomm_node);of_node_put (smicomm_node); - data->smicomm_dev = &plarbdev->dev; +if (!pcommdev) +return -EINVAL ; + data->smicomm_dev = &pcommdev->dev; link =device_link_add (data->smicomm_dev, dev,DL_FLAG_STATELESS |DL_FLAG_PM_RUNTIME ); +platform_device_put (pcommdev);if (!link) {dev_err (dev,"Unable to link %s.\n" ,dev_name (data->smicomm_dev));return -EINVAL ;
Signature · 1 line
2.18.0
Yong Wu
maintainerPATCH v3 3/7 iommu/mediatek: Use component_match_add
In reply to Yong WuIn order to simplify the error patch(avoid call of_node_put), Use component_match_add instead component_match_add_release since we are only interested in the "device" here. Then we could always call of_node_put in normal path.
Strictly this is not a fixes patch, but it is a prepare for adding the error path, thus I add a Fixes tag too.
--- drivers/iommu/mtk_iommu.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/iommu/mtk_iommu.c +4 -6
@@ -1070,19 +1070,17 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m id = i; plarbdev =of_find_device_by_node (larbnode); -if (!plarbdev) { -of_node_put (larbnode); +of_node_put (larbnode); +if (!plarbdev)return -ENODEV ; - } +if (!plarbdev->dev.driver) { -of_node_put (larbnode);platform_device_put (plarbdev);return -EPROBE_DEFER ; } data->larb_imu[id].dev = &plarbdev->dev; -component_match_add_release (dev, match, component_release_of, - component_compare_of, larbnode); +component_match_add (dev, match, component_compare_dev, &plarbdev->dev);platform_device_put (plarbdev); }
Signature · 1 line
2.18.0
Yong Wu
maintainerPATCH v3 4/7 iommu/mediatek: Add error path for loop of mm_dts_parse
In reply to Yong WuThe mtk_iommu_mm_dts_parse will parse the smi larbs nodes. if the i+1 larb is parsed fail, we should put_device for the 0..i larbs.
There are two places need to comment:
1) The larbid may be not linear mapping, we should loop whole the array in the error path.
2) I move this line position: "data->larb_imu[id].dev = &plarbdev->dev;" That means set data->larb_imu[id].dev before the error path. then we don't need "platform_device_put(plarbdev)" again while probe_defer case. All depend on "put_device" in the error path in error cases.
--- drivers/iommu/mtk_iommu.c | 42 ++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 12 deletions(-)
drivers/iommu/mtk_iommu.c +30 -12
@@ -1057,8 +1057,10 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **mu32 id; larbnode =of_parse_phandle (dev->of_node,"mediatek,larbs" , i); -if (!larbnode) -return -EINVAL ; +if (!larbnode) { + ret = -EINVAL ; + goto err_larbdev_put; + }if (!of_device_is_available (larbnode)) {of_node_put (larbnode);
@@ -1071,14 +1073,16 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m plarbdev =of_find_device_by_node (larbnode);of_node_put (larbnode); -if (!plarbdev) -return -ENODEV ; +if (!plarbdev) { + ret = -ENODEV ; + goto err_larbdev_put; + } + data->larb_imu[id].dev = &plarbdev->dev;if (!plarbdev->dev.driver) { -platform_device_put (plarbdev); -return -EPROBE_DEFER ; + ret = -EPROBE_DEFER ; + goto err_larbdev_put; } - data->larb_imu[id].dev = &plarbdev->dev;component_match_add (dev, match, component_compare_dev, &plarbdev->dev);platform_device_put (plarbdev);
@@ -1086,8 +1090,10 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m/* Get smi-(sub)-common dev from the last larb. */ smi_subcomm_node =of_parse_phandle (larbnode,"mediatek,smi" ,0 ); -if (!smi_subcomm_node) -return -EINVAL ; +if (!smi_subcomm_node) { + ret = -EINVAL ; + goto err_larbdev_put; + }/* * It may have two level smi-common. the node is smi-sub-common if it
@@ -1101,8 +1107,10 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m pcommdev =of_find_device_by_node (smicomm_node);of_node_put (smicomm_node); -if (!pcommdev) -return -EINVAL ; +if (!pcommdev) { + ret = -EINVAL ; + goto err_larbdev_put; + } data->smicomm_dev = &pcommdev->dev; link = device_link_add(data->smicomm_dev, dev,
@@ -1110,9 +1118,19 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **mplatform_device_put (pcommdev);if (!link) {dev_err (dev,"Unable to link %s.\n" ,dev_name (data->smicomm_dev)); -return -EINVAL ; + ret = -EINVAL ; + goto err_larbdev_put; }return 0 ; + +err_larbdev_put: +/* id may be not linear mapping, loop whole the array */ +for (i =0 ; i <MTK_LARB_NR_MAX ; i++) { +if (!data->larb_imu[i].dev) +continue ; +put_device (data->larb_imu[i].dev); + } +return ret; }static int mtk_iommu_probe (struct platform_device *pdev)
Signature · 1 line
2.18.0
Yong Wu
maintainerPATCH v3 5/7 iommu/mediatek: Validate number of phandles associated with "mediatek,larbs"
In reply to Yong WuFrom: Guenter Roeck <[email protected]>
Fix the smatch warnings:drivers/iommu/mtk_iommu.c:878 mtk_iommu_mm_dts_parse() error: uninitialized symbol 'larbnode'.
If someone abuse the dtsi node(Don't follow the definition of dt-binding), for example "mediatek,larbs" is provided as boolean property, "larb_nr" will be zero and cause abnormal.
To fix this problem and improve the code safety, add some checking for the invalid input from dtsi, e.g. checking the larb_nr/larbid valid range, and avoid "mediatek,larb-id" property conflicts in the smi-larb nodes.
--- drivers/iommu/mtk_iommu.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
drivers/iommu/mtk_iommu.c +12 -0
@@ -1052,6 +1052,8 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m larb_nr =of_count_phandle_with_args (dev->of_node,"mediatek,larbs" ,NULL );if (larb_nr <0 )return larb_nr; +if (larb_nr ==0 || larb_nr >MTK_LARB_NR_MAX ) +return -EINVAL ;for (i =0 ; i < larb_nr; i++) {u32 id;
@@ -1070,6 +1072,11 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m ret =of_property_read_u32 (larbnode,"mediatek,larb-id" , &id);if (ret)/* The id is consecutive if there is no this property */ id = i; +if (id >=MTK_LARB_NR_MAX ) { +of_node_put (larbnode); + ret = -EINVAL ; + goto err_larbdev_put; + } plarbdev =of_find_device_by_node (larbnode);of_node_put (larbnode);
@@ -1077,6 +1084,11 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m ret = -ENODEV ; goto err_larbdev_put; } +if (data->larb_imu[id].dev) { +platform_device_put (plarbdev); + ret = -EEXIST ; + goto err_larbdev_put; + } data->larb_imu[id].dev = &plarbdev->dev;if (!plarbdev->dev.driver) {
Signature · 1 line
2.18.0
Yong Wu
maintainerPATCH v3 6/7 iommu/mediatek: Improve safety for mediatek,smi property in larb nodes
In reply to Yong WuNo functional change. Just improve safety from dts.
All the larbs that connect to one IOMMU must connect with the same smi-common. This patch checks all the mediatek,smi property for each larb, If their mediatek,smi are different, it will return fails. Also avoid there is no available smi-larb nodes.
--- drivers/iommu/mtk_iommu.c | 53 +++++++++++++++++++++++++++------------ 1 file changed, 37 insertions(+), 16 deletions(-)
drivers/iommu/mtk_iommu.c +37 -16
@@ -1044,7 +1044,7 @@ static const struct component_master_ops mtk_iommu_com_ops = {static int mtk_iommu_mm_dts_parse (struct device *dev,struct component_match **match,struct mtk_iommu_data *data) { -struct device_node *larbnode, *smicomm_node, *smi_subcomm_node; +struct device_node *larbnode, *frst_avail_smicomm_node =NULL ;struct platform_device *plarbdev, *pcommdev;struct device_link *link;int i, larb_nr, ret;
@@ -1056,6 +1056,7 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **mreturn -EINVAL ;for (i =0 ; i < larb_nr; i++) { +struct device_node *smicomm_node, *smi_subcomm_node;u32 id; larbnode =of_parse_phandle (dev->of_node,"mediatek,larbs" , i);
@@ -1096,29 +1097,49 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m goto err_larbdev_put; } +/* Get smi-(sub)-common dev from the last larb. */ + smi_subcomm_node =of_parse_phandle (larbnode,"mediatek,smi" ,0 ); +if (!smi_subcomm_node) { + ret = -EINVAL ; + goto err_larbdev_put; + } + +/* +* It may have two level smi-common. the node is smi-sub-common if it +* has a new mediatek,smi property. otherwise it is smi-commmon. +*/ + smicomm_node =of_parse_phandle (smi_subcomm_node,"mediatek,smi" ,0 ); +if (smicomm_node) +of_node_put (smi_subcomm_node); +else + smicomm_node = smi_subcomm_node; + +/* +* All the larbs that connect to one IOMMU must connect with the same +* smi-common. +*/ +if (!frst_avail_smicomm_node) { + frst_avail_smicomm_node = smicomm_node; + }else if (frst_avail_smicomm_node != smicomm_node) { +dev_err (dev,"mediatek,smi property is not right @larb%d." , id); +of_node_put (smicomm_node); + ret = -EINVAL ; + goto err_larbdev_put; + }else { +of_node_put (smicomm_node); + } +component_match_add (dev, match, component_compare_dev, &plarbdev->dev);platform_device_put (plarbdev); } -/* Get smi-(sub)-common dev from the last larb. */ - smi_subcomm_node =of_parse_phandle (larbnode,"mediatek,smi" ,0 ); -if (!smi_subcomm_node) { +if (!frst_avail_smicomm_node) { ret = -EINVAL ; goto err_larbdev_put; } -/* -* It may have two level smi-common. the node is smi-sub-common if it -* has a new mediatek,smi property. otherwise it is smi-commmon. -*/ - smicomm_node =of_parse_phandle (smi_subcomm_node,"mediatek,smi" ,0 ); -if (smicomm_node) -of_node_put (smi_subcomm_node); -else - smicomm_node = smi_subcomm_node; - - pcommdev =of_find_device_by_node (smicomm_node); -of_node_put (smicomm_node); + pcommdev =of_find_device_by_node (frst_avail_smicomm_node); +of_node_put (frst_avail_smicomm_node);if (!pcommdev) { ret = -EINVAL ; goto err_larbdev_put;
Signature · 1 line
2.18.0
Yong Wu
maintainerPATCH v3 7/7 iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data
In reply to Yong WuJust remove a unused variable that only is for mtk_iommu_v1.
--- drivers/iommu/mtk_iommu.c | 3 --- 1 file changed, 3 deletions(-)
drivers/iommu/mtk_iommu.c +0 -3
@@ -221,10 +221,7 @@ struct mtk_iommu_data {struct device *smicomm_dev;struct mtk_iommu_bank_data *bank; - -struct dma_iommu_mapping *mapping;/* For mtk_iommu_v1.c */ struct regmap *pericfg; -struct mutex mutex;/* Protect m4u_group/m4u_dom above */ /*
Signature · 1 line
2.18.0