phy: amlogic: Add support for the G12A Analog MIPI D-PHY
v5 cover phy: amlogic: Add support for the G12A Analog MIPI D-PHY
The Amlogic G12A SoCs embeds an Analog MIPI D-PHY to communicate with DSI panels, this adds the bindings.
This Analog D-PHY works with a separate Digital MIPI D-PHY.
This serie adds the Bindings and the PHY driver.
Changes from v4 at [4]:
- Add bindings review from Rib
- Order in Kconfig alphabetically
- Switch to dev_err_probe for error log
- Remove last comma after sentinel compatible entry
- Depends on MFD_SYSCON instead
- Do not keep reference of parent node pointer
Changes from v3 at [3]:
- Add sentinel comment as requested by Martin
Changes from v2 at [2]:
- Bindings example fix
Changes from v1 at [1]:
- Bindings fixes
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
[4] https://lore.kernel.org/r/[email protected]
Neil Armstrong (2):
dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings
phy: amlogic: Add G12A Analog MIPI D-PHY driver
.../phy/amlogic,g12a-mipi-dphy-analog.yaml | 35 ++++ drivers/phy/amlogic/Kconfig | 12 ++ drivers/phy/amlogic/Makefile | 1 + .../amlogic/phy-meson-g12a-mipi-dphy-analog.c | 171 ++++++++++++++++++ 4 files changed, 219 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml create mode 100644 drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
Signature · 7 lines
2.25.1 -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
PATCH v5 1/2 dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings
The Amlogic G12A SoCs embeds an Analog MIPI D-PHY to communicate with DSI panels, this adds the bindings.
This Analog D-PHY works with a separate Digital MIPI D-PHY.
--- .../phy/amlogic,g12a-mipi-dphy-analog.yaml | 35 +++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml new file +35 -0
@@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic G12A MIPI analog PHY + +maintainers: + - Neil Armstrong <[email protected]> + +properties: + compatible: + const: amlogic,g12a-mipi-dphy-analog + + "#phy-cells": + const: 0 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@0 { + compatible = "amlogic,g12a-mipi-dphy-analog"; + reg = <0x0 0xc>; + #phy-cells = <0>; + };
Signature · 1 line
2.25.1
PATCH v5 2/2 phy: amlogic: Add G12A Analog MIPI D-PHY driver
In reply to Neil ArmstrongThe Amlogic G12A SoCs embeds an Analog MIPI D-PHY used to communicate with DSI panels.
--- drivers/phy/amlogic/Kconfig | 12 ++ drivers/phy/amlogic/Makefile | 1 + .../amlogic/phy-meson-g12a-mipi-dphy-analog.c | 171 ++++++++++++++++++ 3 files changed, 184 insertions(+) create mode 100644 drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
drivers/phy/amlogic/Kconfig +12 -0
@@ -37,6 +37,18 @@ config PHY_MESON_GXL_USB2 GXL and GXM SoCs. If unsure, say N. +config PHY_MESON_G12A_MIPI_DPHY_ANALOG + tristate "Meson G12A MIPI Analog DPHY driver" + default ARCH_MESON + depends on OF && (ARCH_MESON || COMPILE_TEST) + select GENERIC_PHY + select MFD_SYSCON + select GENERIC_PHY_MIPI_DPHY + help + Enable this to support the Meson MIPI Analog DPHY found in Meson G12A + SoCs. + If unsure, say N. + config PHY_MESON_G12A_USB2 tristate "Meson G12A USB2 PHY driver" default ARCH_MESON
drivers/phy/amlogic/Makefile +1 -0
@@ -4,6 +4,7 @@ obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o +obj-$(CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG) += phy-meson-g12a-mipi-dphy-analog.o obj-$(CONFIG_PHY_MESON_AXG_PCIE) += phy-meson-axg-pcie.o obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o obj-$(CONFIG_PHY_MESON_AXG_MIPI_DPHY) += phy-meson-axg-mipi-dphy.o
drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c new file +171 -0
171 lines not on this page · raw message
Signature · 1 line
2.25.1
Quoted 6 lines · Neil Armstrong
The Amlogic G12A SoCs embeds an Analog MIPI D-PHY to communicate with DSI panels, this adds the bindings.
This Analog D-PHY works with a separate Digital MIPI D-PHY.
This serie adds the Bindings and the PHY driver.
Applied, thanks
Signature · 6 lines
~Vinod _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic