remoteproc: pru: Enable PRU cores on K3 AM62x SoCs
Subsystems (2)
v2 cover remoteproc: pru: Enable PRU cores on K3 AM62x SoCs
Series adds AM62x specific compatible string to enable PRUSS-M in AM62x SoCs.
Changes from v1:
1) Added a new patch to re-arrange "compatible" in alphabetic order
v1: https://lore.kernel.org/r/[email protected]
Kishon Vijay Abraham I (3):
dt-bindings: remoteproc: pru: Re-arrange "compatible" in alphabetic
order
dt-bindings: remoteproc: pru: Update bindings for K3 AM62x SoCs
remoteproc: pru: Add support for various PRU cores on K3 AM62x SoCs
.../devicetree/bindings/remoteproc/ti,pru-rproc.yaml | 5 +++-- drivers/remoteproc/pru_rproc.c | 1 + 2 files changed, 4 insertions(+), 2 deletions(-)
Signature · 1 line
2.17.1
PATCH v2 1/3 dt-bindings: remoteproc: pru: Re-arrange "compatible" in alphabetic order
Re-arrange "compatible" string in alphabetic order to decrease the chance of conflicts.
--- .../devicetree/bindings/remoteproc/ti,pru-rproc.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml +2 -2
@@ -36,17 +36,17 @@ properties: enum: - ti,am3356-pru # for AM335x SoC family (AM3356+ SoCs only) - ti,am4376-pru # for AM437x SoC family (AM4376+ SoCs only) + - ti,am5728-pru # for AM57xx SoC family - ti,am642-pru # for PRUs in K3 AM64x SoC family - ti,am642-rtu # for RTUs in K3 AM64x SoC family - ti,am642-tx-pru # for Tx_PRUs in K3 AM64x SoC family - - ti,am5728-pru # for AM57xx SoC family - - ti,k2g-pru # for 66AK2G SoC family - ti,am654-pru # for PRUs in K3 AM65x SoC family - ti,am654-rtu # for RTUs in K3 AM65x SoC family - ti,am654-tx-pru # for Tx_PRUs in K3 AM65x SR2.0 SoCs - ti,j721e-pru # for PRUs in K3 J721E SoC family - ti,j721e-rtu # for RTUs in K3 J721E SoC family - ti,j721e-tx-pru # for Tx_PRUs in K3 J721E SoC family + - ti,k2g-pru # for 66AK2G SoC family reg: items:
Signature · 1 line
2.17.1
Re: [PATCH v2 1/3] dt-bindings: remoteproc: pru: Re-arrange "compatible" in alphabetic order
Quoted 4 lines · Kishon Vijay Abraham I
Re-arrange "compatible" string in alphabetic order to decrease the chance of conflicts.
Signed-off-by Kishon Vijay Abraham I <[email protected]>
Best regards,
Krzysztof
PATCH v2 2/3 dt-bindings: remoteproc: pru: Update bindings for K3 AM62x SoCs
In reply to Kishon Vijay Abraham IUpdate the PRU remoteproc bindings for the PRU cores on AM62x SoCs.
--- Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml +1 -0
@@ -37,6 +37,7 @@ properties: - ti,am3356-pru # for AM335x SoC family (AM3356+ SoCs only) - ti,am4376-pru # for AM437x SoC family (AM4376+ SoCs only) - ti,am5728-pru # for AM57xx SoC family + - ti,am625-pru # for PRUs in K3 AM62x SoC family - ti,am642-pru # for PRUs in K3 AM64x SoC family - ti,am642-rtu # for RTUs in K3 AM64x SoC family - ti,am642-tx-pru # for Tx_PRUs in K3 AM64x SoC family
Signature · 1 line
2.17.1
Re: [PATCH v2 2/3] dt-bindings: remoteproc: pru: Update bindings for K3 AM62x SoCs
Quoted 3 lines · Kishon Vijay Abraham I
Update the PRU remoteproc bindings for the PRU cores on AM62x SoCs.
Signed-off-by Kishon Vijay Abraham I <[email protected]>
Best regards,
Krzysztof
PATCH v2 3/3 remoteproc: pru: Add support for various PRU cores on K3 AM62x SoCs
In reply to Kishon Vijay Abraham IThe K3 AM62x family of SoC has one PRUSS-M instance and it has two Programmable Real-Time Units (PRU0 and PRU1). This does not support Industrial Communications Subsystem features like Ethernet.
Enhance the existing PRU remoteproc driver to support the PRU cores by using specific compatibles. The initial names for the firmware images for each PRU core are retrieved from DT nodes, and can be adjusted through sysfs if required.
--- drivers/remoteproc/pru_rproc.c | 1 + 1 file changed, 1 insertion(+)
drivers/remoteproc/pru_rproc.c +1 -0
@@ -897,6 +897,7 @@ static const struct of_device_id pru_rproc_match[] = { { .compatible = "ti,j721e-pru", .data = &k3_pru_data }, { .compatible = "ti,j721e-rtu", .data = &k3_rtu_data }, { .compatible = "ti,j721e-tx-pru", .data = &k3_tx_pru_data }, + { .compatible = "ti,am625-pru", .data = &k3_pru_data }, {}, };MODULE_DEVICE_TABLE (of, pru_rproc_match);
Signature · 1 line
2.17.1
Mathieu Poirier
maintainerRe: [PATCH v2 3/3] remoteproc: pru: Add support for various PRU cores on K3 AM62x SoCs
Quoted 19 lines · Kishon Vijay Abraham I
The K3 AM62x family of SoC has one PRUSS-M instance and it has two Programmable Real-Time Units (PRU0 and PRU1). This does not support Industrial Communications Subsystem features like Ethernet.
Enhance the existing PRU remoteproc driver to support the PRU cores by using specific compatibles. The initial names for the firmware images for each PRU core are retrieved from DT nodes, and can be adjusted through sysfs if required.
Signed-off-by Kishon Vijay Abraham I <[email protected]>--- drivers/remoteproc/pru_rproc.c | 1 + 1 file changed, 1 insertion(+)drivers/remoteproc/pru_rproc.c +0
-0
drivers/remoteproc/pru_rproc.c static const struct of_device_id pru_rproc_match[] = { · line 900
Quoted 4 lines
drivers/remoteproc/pru_rproc.c +1
-0@@ -897,6 +897,7 @@ static const struct of_device_id pru_rproc_match[] = { { .compatible = "ti,j721e-pru", .data = &k3_pru_data }, { .compatible = "ti,j721e-rtu", .data = &k3_rtu_data }, { .compatible = "ti,j721e-tx-pru", .data = &k3_tx_pru_data }, + { .compatible = "ti,am625-pru", .data = &k3_pru_data },
I have applied this set.
Thanks,
Mathieu
Quoted 6 lines
drivers/remoteproc/pru_rproc.c +0
-0{}, };MODULE_DEVICE_TABLE (of, pru_rproc_match);Signature · 1 line
2.17.1