ARM: dts: colibri-imx6ull: fix snvs pinmux group
Subsystems (2)
PATCH 1/1 ARM: dts: colibri-imx6ull: fix snvs pinmux group
From: Max Krummenacher <[email protected]>
A pin controlled by the iomuxc-snvs pin controller must be specified under the dtb's iomuxc-snvs node.
Move the one and only pin of that category from the iomuxc node and set the pinctrl-0 using it accordingly.
Fixes 2aa9d6201949 ("ARM: dts: imx6ull-colibri: add touchscreen device nodes")
Signed-off-by Max Krummenacher <[email protected]>
---
arch/arm/boot/dts/imx6ull-colibri.dtsi | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
arch/arm/boot/dts/imx6ull-colibri.dtsi +7 -2
@@ -165,7 +165,7 @@ atmel_mxt_ts: touchscreen@4a { compatible = "atmel,maxtouch"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_atmel_conn>; + pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>; reg = <0x4a>; interrupt-parent = <&gpio5>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 / INT */
@@ -330,7 +330,6 @@ pinctrl_atmel_conn: atmelconngrp { fsl,pins = < MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */ - MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */ >; };
@@ -683,6 +682,12 @@ }; &iomuxc_snvs { + pinctrl_atmel_snvs_conn: atmelsnvsconngrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */ + >; + }; + pinctrl_snvs_gpio1: snvsgpio1grp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x110a0 /* SODIMM 93 */
Signature · 1 line
2.20.1
Shawn Guo
AppliedQuoted 10 lines · Max Krummenacher
From: Max Krummenacher <[email protected]>
A pin controlled by the iomuxc-snvs pin controller must be specified under the dtb's iomuxc-snvs node.
Move the one and only pin of that category from the iomuxc node and set the pinctrl-0 using it accordingly.
Fixes 2aa9d6201949 ("ARM: dts: imx6ull-colibri: add touchscreen device nodes")Signed-off-by Max Krummenacher <[email protected]>
Applied, thanks!