Skip to contentSkip to conversation

mm: kmemleak: take a full lowmem check in kmemleak_*_phys()

PATCH In review Li Chen 1 participant 2 messages Jul 11, 2022

Subsystems (3)
lore
Share & tools
lore

Li Chen

author
#0 lore raw

PATCH 1/1 mm: kmemleak: take a full lowmem check in kmemleak_*_phys()

From: Patrick Wang <[email protected]>

commit 23c2d497de21f25898fbea70aeb292ab8acc8c94 upstream.

The kmemleak_*_phys() apis do not check the address for lowmem's min boundary, while the caller may pass an address below lowmem, which will trigger an oops:

  # echo scan > /sys/kernel/debug/kmemleak
  Unable to handle kernel paging request at virtual address ff5fffffffe00000
  Oops [#1]
  Modules linked in:
  CPU: 2 PID: 134 Comm: bash Not tainted 5.18.0-rc1-next-20220407 #33
  Hardware name: riscv-virtio,qemu (DT)
  epc : scan_block+0x74/0x15c
   ra : scan_block+0x72/0x15c
  epc : ffffffff801e5806 ra : ffffffff801e5804 sp : ff200000104abc30
   gp : ffffffff815cd4e8 tp : ff60000004cfa340 t0 : 0000000000000200
   t1 : 00aaaaaac23954cc t2 : 00000000000003ff s0 : ff200000104abc90
   s1 : ffffffff81b0ff28 a0 : 0000000000000000 a1 : ff5fffffffe01000
   a2 : ffffffff81b0ff28 a3 : 0000000000000002 a4 : 0000000000000001
   a5 : 0000000000000000 a6 : ff200000104abd7c a7 : 0000000000000005
   s2 : ff5fffffffe00ff9 s3 : ffffffff815cd998 s4 : ffffffff815d0e90
   s5 : ffffffff81b0ff28 s6 : 0000000000000020 s7 : ffffffff815d0eb0
   s8 : ffffffffffffffff s9 : ff5fffffffe00000 s10: ff5fffffffe01000
   s11: 0000000000000022 t3 : 00ffffffaa17db4c t4 : 000000000000000f
   t5 : 0000000000000001 t6 : 0000000000000000
  status: 0000000000000100 badaddr: ff5fffffffe00000 cause: 000000000000000d
    scan_gray_list+0x12e/0x1a6
    kmemleak_scan+0x2aa/0x57e
    kmemleak_write+0x32a/0x40c
    full_proxy_write+0x56/0x82
    vfs_write+0xa6/0x2a6
    ksys_write+0x6c/0xe2
    sys_write+0x22/0x2a
    ret_from_syscall+0x0/0x2

The callers may not quite know the actual address they pass(e.g. from devicetree). So the kmemleak_*_phys() apis should guarantee the address they finally use is in lowmem range, so check the address for lowmem's min boundary.

---
 mm/kmemleak.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
mm/kmemleak.c +4 -4
index b78861b8e013..859303aae180 100644
@@ -1125,7 +1125,7 @@ EXPORT_SYMBOL(kmemleak_no_scan);
 void __ref kmemleak_alloc_phys(phys_addr_t phys, size_t size, int min_count,
 			       gfp_t gfp)
 {
-	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
+	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_alloc(__va(phys), size, min_count, gfp);
 }
 EXPORT_SYMBOL(kmemleak_alloc_phys);
@@ -1139,7 +1139,7 @@ EXPORT_SYMBOL(kmemleak_alloc_phys);
  */
 void __ref kmemleak_free_part_phys(phys_addr_t phys, size_t size)
 {
-	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
+	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_free_part(__va(phys), size);
 }
 EXPORT_SYMBOL(kmemleak_free_part_phys);
@@ -1151,7 +1151,7 @@ EXPORT_SYMBOL(kmemleak_free_part_phys);
  */
 void __ref kmemleak_not_leak_phys(phys_addr_t phys)
 {
-	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
+	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_not_leak(__va(phys));
 }
 EXPORT_SYMBOL(kmemleak_not_leak_phys);
@@ -1163,7 +1163,7 @@ EXPORT_SYMBOL(kmemleak_not_leak_phys);
  */
 void __ref kmemleak_ignore_phys(phys_addr_t phys)
 {
-	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
+	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_ignore(__va(phys));
 }
 EXPORT_SYMBOL(kmemleak_ignore_phys);
Signature · 1 line
2.36.1
author
#1 lore raw

Sorry, pls ignore this mail, my bad.

Regards,
Li
---- On Mon, 11 Jul 2022 19:08:04 +0800 Li Chen <[email protected]> wrote ---

Quoted 97 lines

From: Patrick Wang <[email protected]>

commit 23c2d497de21f25898fbea70aeb292ab8acc8c94 upstream.

The kmemleak_*_phys() apis do not check the address for lowmem's min boundary, while the caller may pass an address below lowmem, which will trigger an oops:

  # echo scan > /sys/kernel/debug/kmemleak
  Unable to handle kernel paging request at virtual address ff5fffffffe00000
  Oops [#1]
  Modules linked in:
  CPU: 2 PID: 134 Comm: bash Not tainted 5.18.0-rc1-next-20220407 #33
  Hardware name: riscv-virtio,qemu (DT)
  epc : scan_block+0x74/0x15c
   ra : scan_block+0x72/0x15c
  epc : ffffffff801e5806 ra : ffffffff801e5804 sp : ff200000104abc30
   gp : ffffffff815cd4e8 tp : ff60000004cfa340 t0 : 0000000000000200
   t1 : 00aaaaaac23954cc t2 : 00000000000003ff s0 : ff200000104abc90
   s1 : ffffffff81b0ff28 a0 : 0000000000000000 a1 : ff5fffffffe01000
   a2 : ffffffff81b0ff28 a3 : 0000000000000002 a4 : 0000000000000001
   a5 : 0000000000000000 a6 : ff200000104abd7c a7 : 0000000000000005
   s2 : ff5fffffffe00ff9 s3 : ffffffff815cd998 s4 : ffffffff815d0e90
   s5 : ffffffff81b0ff28 s6 : 0000000000000020 s7 : ffffffff815d0eb0
   s8 : ffffffffffffffff s9 : ff5fffffffe00000 s10: ff5fffffffe01000
   s11: 0000000000000022 t3 : 00ffffffaa17db4c t4 : 000000000000000f
   t5 : 0000000000000001 t6 : 0000000000000000
  status: 0000000000000100 badaddr: ff5fffffffe00000 cause: 000000000000000d
    scan_gray_list+0x12e/0x1a6
    kmemleak_scan+0x2aa/0x57e
    kmemleak_write+0x32a/0x40c
    full_proxy_write+0x56/0x82
    vfs_write+0xa6/0x2a6
    ksys_write+0x6c/0xe2
    sys_write+0x22/0x2a
    ret_from_syscall+0x0/0x2

The callers may not quite know the actual address they pass(e.g. from devicetree). So the kmemleak_*_phys() apis should guarantee the address they finally use is in lowmem range, so check the address for lowmem's min boundary.

---
 mm/kmemleak.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
mm/kmemleak.c +4 -4
index b78861b8e013..859303aae180 100644
@@ -1125,7 +1125,7 @@ EXPORT_SYMBOL(kmemleak_no_scan);
 void __ref kmemleak_alloc_phys(phys_addr_t phys, size_t size, int min_count,
                    gfp_t gfp)
 {
-    if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
+    if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
         kmemleak_alloc(__va(phys), size, min_count, gfp);
 }
 EXPORT_SYMBOL(kmemleak_alloc_phys);
@@ -1139,7 +1139,7 @@ EXPORT_SYMBOL(kmemleak_alloc_phys);
  */
 void __ref kmemleak_free_part_phys(phys_addr_t phys, size_t size)
 {
-    if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
+    if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
         kmemleak_free_part(__va(phys), size);
 }
 EXPORT_SYMBOL(kmemleak_free_part_phys);
@@ -1151,7 +1151,7 @@ EXPORT_SYMBOL(kmemleak_free_part_phys);
  */
 void __ref kmemleak_not_leak_phys(phys_addr_t phys)
 {
-    if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
+    if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
         kmemleak_not_leak(__va(phys));
 }
 EXPORT_SYMBOL(kmemleak_not_leak_phys);
@@ -1163,7 +1163,7 @@ EXPORT_SYMBOL(kmemleak_not_leak_phys);
  */
 void __ref kmemleak_ignore_phys(phys_addr_t phys)
 {
-    if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
+    if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
         kmemleak_ignore(__va(phys));
 }
 EXPORT_SYMBOL(kmemleak_ignore_phys);
Signature · 1 line
2.36.1