Skip to contentSkip to conversation

ACPI: Buffer property and reference as string support

PATCH In review Sakari Ailus 2 participants 15 messages Jul 11, 2022 – Jul 27, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v3 cover ACPI: Buffer property and reference as string support

Hello everyone,

This set adds support for _DSD buffer properties (specified by DSD Guide <URL:https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.md>) as well as support for references as strings. Reference property type was previously supported for device objects only, whereas string references enable referencing also _DSD sub-node objects --- also included in the set.

The ACPICA patch has been submitted to upstream but not merged yet.

This set currently prepares for data node string reference support and does not add it anymore.

since v3:

- Use bool return type for acpi_tie_nondev_subnodes. Return false on failure.

- Print ACPI buffer parsing error references as %*pE (was %s).

- Unwrap a few lines (i.e. non-functional changes).

- Declare local variables for acpi_copy_property_array_uint().

- Clean up buffer size check in acpi_data_prop_read(), add break at the end of the default case.

since v2:

- Use C99 _Generic() in patch unifying reading integer arrays.

since v1:

- Drop the ACPICA, data node child list initialisation and data node string reference patches.

Sakari Ailus (8):
ACPI: property: Return type of acpi_add_nondev_subnodes() should be
bool
ACPI: property: Tie data nodes to acpi handles
ACPI: property: Use acpi_object_type consistently in property ref
parsing
ACPI: property: Move property ref argument parsing into a new function
ACPI: property: Switch node property referencing from ifs to a switch
ACPI: property: Unify integer value reading functions
ACPI: property: Add support for parsing buffer property UUID
ACPI: property: Read buffer properties as integers

 drivers/acpi/property.c | 465 +++++++++++++++++++++++++++-------------
 include/acpi/acpi_bus.h |   3 +-
 include/linux/acpi.h    |   2 +-
 3 files changed, 318 insertions(+), 152 deletions(-)
Signature · 1 line
2.30.2
#1 lore raw

PATCH v4 1/8 ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool

The value acpi_add_nondev_subnodes() returns is bool so change the return type of the function to match that.

Fixes 445b0eb058f5 ("ACPI / property: Add support for data-only subnodes")
---
 drivers/acpi/property.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/acpi/property.c +4 -4
index e764f9ac9cf8f..6d698f3f83a0a 100644
@@ -155,10 +155,10 @@ static bool acpi_nondev_subnode_ok(acpi_handle scope,
 	return acpi_nondev_subnode_data_ok(handle, link, list, parent);
 }
 
-static int acpi_add_nondev_subnodes(acpi_handle scope,
-				    const union acpi_object *links,
-				    struct list_head *list,
-				    struct fwnode_handle *parent)
+static bool acpi_add_nondev_subnodes(acpi_handle scope,
+				     const union acpi_object *links,
+				     struct list_head *list,
+				     struct fwnode_handle *parent)
 {
 	bool ret = false;
 	int i;
Signature · 1 line
2.30.2
#2 lore raw

PATCH v4 2/8 ACPI: property: Tie data nodes to acpi handles

In reply to Sakari Ailus

ACPICA allows associating additional information (i.e. pointers with specific tag) to acpi_handles. The acpi_device's are associated to acpi_handle's in acpi_tie_acpi_dev() in scan.c, do the same here for the _DSD data nodes.

This allows direct data node references in properties, implemented later on in the series.

---
 drivers/acpi/property.c | 42 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)
drivers/acpi/property.c +41 -1
index 6d698f3f83a0a..08b5292d2f89b 100644
@@ -340,6 +340,43 @@ acpi_data_add_props(struct acpi_device_data *data, const guid_t *guid,
 	return props;
 }
 
+static void acpi_nondev_subnode_tag(acpi_handle handle, void *context)
+{
+}
+
+static void acpi_untie_nondev_subnodes(struct acpi_device_data *data)
+{
+	struct acpi_data_node *dn;
+
+	list_for_each_entry(dn, &data->subnodes, sibling) {
+		acpi_detach_data(dn->handle, acpi_nondev_subnode_tag);
+
+		acpi_untie_nondev_subnodes(&dn->data);
+	}
+}
+
+static bool acpi_tie_nondev_subnodes(struct acpi_device_data *data)
+{
+	struct acpi_data_node *dn;
+
+	list_for_each_entry(dn, &data->subnodes, sibling) {
+		acpi_status status;
+		bool ret;
+
+		status = acpi_attach_data(dn->handle, acpi_nondev_subnode_tag, dn);
+		if (ACPI_FAILURE(status)) {
+			acpi_handle_err(dn->handle, "Can't tag data node\n");
+			return false;
+		}
+
+		ret = acpi_tie_nondev_subnodes(&dn->data);
+		if (!ret)
+			return ret;
+	}
+
+	return true;
+}
+
 static bool acpi_extract_properties(const union acpi_object *desc,
 				    struct acpi_device_data *data)
 {
@@ -419,7 +456,9 @@ void acpi_init_properties(struct acpi_device *adev)
 					&adev->data, acpi_fwnode_handle(adev)))
 		adev->data.pointer = buf.pointer;
 
-	if (!adev->data.pointer) {
+	if (!adev->data.pointer ||
+	    !acpi_tie_nondev_subnodes(&adev->data)) {
+		acpi_untie_nondev_subnodes(&adev->data);
 		acpi_handle_debug(adev->handle, "Invalid _DSD data, skipping\n");
 		ACPI_FREE(buf.pointer);
 	}
@@ -462,6 +501,7 @@ static void acpi_destroy_nondev_subnodes(struct list_head *list)
 
 void acpi_free_properties(struct acpi_device *adev)
 {
+	acpi_untie_nondev_subnodes(&adev->data);
 	acpi_destroy_nondev_subnodes(&adev->data.subnodes);
 	ACPI_FREE((void *)adev->data.pointer);
 	adev->data.of_compatible = NULL;
Signature · 1 line
2.30.2
#3 lore raw

PATCH v4 3/8 ACPI: property: Use acpi_object_type consistently in property ref parsing

In reply to Sakari Ailus

The type of union acpi_object field type is acpi_object_type. Use that instead of int.

---
 drivers/acpi/property.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/acpi/property.c +1 -1
index 08b5292d2f89b..8d757ca2a58f3 100644
@@ -793,7 +793,7 @@ int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode,
 			 * nor integer, return an error, we can't parse it.
 			 */
 			for (i = 0; element + i < end && i < num_args; i++) {
-				int type = element[i].type;
+				acpi_object_type type = element[i].type;
 
 				if (type == ACPI_TYPE_LOCAL_REFERENCE)
 					break;
Signature · 1 line
2.30.2
#4 lore raw

PATCH v4 4/8 ACPI: property: Move property ref argument parsing into a new function

In reply to Sakari Ailus

Split out property reference argument parsing out of the __acpi_node_get_property_reference() function into a new one, acpi_get_ref_args(). The new function will be needed also for parsing string references soon.

---
 drivers/acpi/property.c | 103 ++++++++++++++++++++++------------------
 1 file changed, 58 insertions(+), 45 deletions(-)
drivers/acpi/property.c +58 -45
index 8d757ca2a58f3..a2733f8981c7f 100644
@@ -673,6 +673,58 @@ acpi_fwnode_get_named_child_node(const struct fwnode_handle *fwnode,
 	return NULL;
 }
 
+static int acpi_get_ref_args(struct fwnode_reference_args *args,
+			     struct fwnode_handle *ref_fwnode,
+			     const union acpi_object **element,
+			     const union acpi_object *end, size_t num_args)
+{
+	u32 nargs = 0, i;
+
+	/*
+	 * Find the referred data extension node under the
+	 * referred device node.
+	 */
+	for (; *element < end && (*element)->type == ACPI_TYPE_STRING;
+	     (*element)++) {
+		const char *child_name = (*element)->string.pointer;
+
+		ref_fwnode = acpi_fwnode_get_named_child_node(ref_fwnode, child_name);
+		if (!ref_fwnode)
+			return -EINVAL;
+	}
+
+	/*
+	 * Assume the following integer elements are all args. Stop counting on
+	 * the first reference or end of the package arguments. In case of
+	 * neither reference, nor integer, return an error, we can't parse it.
+	 */
+	for (i = 0; (*element) + i < end && i < num_args; i++) {
+		acpi_object_type type = (*element)[i].type;
+
+		if (type == ACPI_TYPE_LOCAL_REFERENCE)
+			break;
+
+		if (type == ACPI_TYPE_INTEGER)
+			nargs++;
+		else
+			return -EINVAL;
+	}
+
+	if (nargs > NR_FWNODE_REFERENCE_ARGS)
+		return -EINVAL;
+
+	if (args) {
+		args->fwnode = ref_fwnode;
+		args->nargs = nargs;
+		for (i = 0; i < nargs; i++)
+			args->args[i] = (*element)[i].integer.value;
+	}
+
+	(*element) += nargs;
+
+	return 0;
+}
+
 /**
  * __acpi_node_get_property_reference - returns handle to the referenced object
  * @fwnode: Firmware node to get the property from
@@ -761,61 +813,22 @@ int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode,
 	end = element + obj->package.count;
 
 	while (element < end) {
-		u32 nargs, i;
-
 		if (element->type == ACPI_TYPE_LOCAL_REFERENCE) {
-			struct fwnode_handle *ref_fwnode;
-
 			device = acpi_fetch_acpi_dev(element->reference.handle);
 			if (!device)
 				return -EINVAL;
 
-			nargs = 0;
 			element++;
 
-			/*
-			 * Find the referred data extension node under the
-			 * referred device node.
-			 */
-			for (ref_fwnode = acpi_fwnode_handle(device);
-			     element < end && element->type == ACPI_TYPE_STRING;
-			     element++) {
-				ref_fwnode = acpi_fwnode_get_named_child_node(
-					ref_fwnode, element->string.pointer);
-				if (!ref_fwnode)
-					return -EINVAL;
-			}
-
-			/*
-			 * Assume the following integer elements are all args.
-			 * Stop counting on the first reference or end of the
-			 * package arguments. In case of neither reference,
-			 * nor integer, return an error, we can't parse it.
-			 */
-			for (i = 0; element + i < end && i < num_args; i++) {
-				acpi_object_type type = element[i].type;
-
-				if (type == ACPI_TYPE_LOCAL_REFERENCE)
-					break;
-				if (type == ACPI_TYPE_INTEGER)
-					nargs++;
-				else
-					return -EINVAL;
-			}
-
-			if (nargs > NR_FWNODE_REFERENCE_ARGS)
-				return -EINVAL;
-
-			if (idx == index) {
-				args->fwnode = ref_fwnode;
-				args->nargs = nargs;
-				for (i = 0; i < nargs; i++)
-					args->args[i] = element[i].integer.value;
+			ret = acpi_get_ref_args(idx == index ? args : NULL,
+						acpi_fwnode_handle(device),
+						&element, end, num_args);
+			if (ret < 0)
+				return ret;
 
+			if (idx == index)
 				return 0;
-			}
 
-			element += nargs;
 		} else if (element->type == ACPI_TYPE_INTEGER) {
 			if (idx == index)
 				return -ENOENT;
Signature · 1 line
2.30.2
#5 lore raw

PATCH v4 5/8 ACPI: property: Switch node property referencing from ifs to a switch

In reply to Sakari Ailus

__acpi_node_get_property_reference() uses a series of if () statements for testing the same variable. There's soon going to be one more value to be tested.

Switch to use switch() instead.

---
 drivers/acpi/property.c | 41 ++++++++++++++++++++++-------------------
 1 file changed, 22 insertions(+), 19 deletions(-)
drivers/acpi/property.c +22 -19
index a2733f8981c7f..3411cd0433b88 100644
@@ -778,11 +778,9 @@ int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode,
 	if (ret)
 		return ret == -EINVAL ? -ENOENT : -EINVAL;
 
-	/*
-	 * The simplest case is when the value is a single reference.  Just
-	 * return that reference then.
-	 */
-	if (obj->type == ACPI_TYPE_LOCAL_REFERENCE) {
+	switch (obj->type) {
+	case ACPI_TYPE_LOCAL_REFERENCE:
+		/* Plain single reference without arguments. */
 		if (index)
 			return -ENOENT;
 
@@ -793,19 +791,21 @@ int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode,
 		args->fwnode = acpi_fwnode_handle(device);
 		args->nargs = 0;
 		return 0;
+	case ACPI_TYPE_PACKAGE:
+		/*
+		 * If it is not a single reference, then it is a package of
+		 * references followed by number of ints as follows:
+		 *
+		 *  Package () { REF, INT, REF, INT, INT }
+		 *
+		 * The index argument is then used to determine which reference
+		 * the caller wants (along with the arguments).
+		 */
+		break;
+	default:
+		return -EINVAL;
 	}
 
-	/*
-	 * If it is not a single reference, then it is a package of
-	 * references followed by number of ints as follows:
-	 *
-	 *  Package () { REF, INT, REF, INT, INT }
-	 *
-	 * The index argument is then used to determine which reference
-	 * the caller wants (along with the arguments).
-	 */
-	if (obj->type != ACPI_TYPE_PACKAGE)
-		return -EINVAL;
 	if (index >= obj->package.count)
 		return -ENOENT;
 
@@ -813,7 +813,8 @@ int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode,
 	end = element + obj->package.count;
 
 	while (element < end) {
-		if (element->type == ACPI_TYPE_LOCAL_REFERENCE) {
+		switch (element->type) {
+		case ACPI_TYPE_LOCAL_REFERENCE:
 			device = acpi_fetch_acpi_dev(element->reference.handle);
 			if (!device)
 				return -EINVAL;
@@ -829,11 +830,13 @@ int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode,
 			if (idx == index)
 				return 0;
 
-		} else if (element->type == ACPI_TYPE_INTEGER) {
+			break;
+		case ACPI_TYPE_INTEGER:
 			if (idx == index)
 				return -ENOENT;
 			element++;
-		} else {
+			break;
+		default:
 			return -EINVAL;
 		}
 
Signature · 1 line
2.30.2
#6 lore raw

PATCH v4 6/8 ACPI: property: Unify integer value reading functions

In reply to Sakari Ailus

Unify functions reading ACPI property integer values into a single macro using C99 _Generic().

Also use size_t for the counter instead of int.

---
 drivers/acpi/property.c | 96 +++++++++++++----------------------------
 1 file changed, 31 insertions(+), 65 deletions(-)
drivers/acpi/property.c +31 -65
index 3411cd0433b88..236a847f1bfbd 100644
@@ -908,67 +908,33 @@ static int acpi_data_prop_read_single(const struct acpi_device_data *data,
 	return ret;
 }
 
-static int acpi_copy_property_array_u8(const union acpi_object *items, u8 *val,
-				       size_t nval)
-{
-	int i;
-
-	for (i = 0; i < nval; i++) {
-		if (items[i].type != ACPI_TYPE_INTEGER)
-			return -EPROTO;
-		if (items[i].integer.value > U8_MAX)
-			return -EOVERFLOW;
-
-		val[i] = items[i].integer.value;
-	}
-	return 0;
-}
-
-static int acpi_copy_property_array_u16(const union acpi_object *items,
-					u16 *val, size_t nval)
-{
-	int i;
-
-	for (i = 0; i < nval; i++) {
-		if (items[i].type != ACPI_TYPE_INTEGER)
-			return -EPROTO;
-		if (items[i].integer.value > U16_MAX)
-			return -EOVERFLOW;
-
-		val[i] = items[i].integer.value;
-	}
-	return 0;
-}
-
-static int acpi_copy_property_array_u32(const union acpi_object *items,
-					u32 *val, size_t nval)
-{
-	int i;
-
-	for (i = 0; i < nval; i++) {
-		if (items[i].type != ACPI_TYPE_INTEGER)
-			return -EPROTO;
-		if (items[i].integer.value > U32_MAX)
-			return -EOVERFLOW;
-
-		val[i] = items[i].integer.value;
-	}
-	return 0;
-}
-
-static int acpi_copy_property_array_u64(const union acpi_object *items,
-					u64 *val, size_t nval)
-{
-	int i;
-
-	for (i = 0; i < nval; i++) {
-		if (items[i].type != ACPI_TYPE_INTEGER)
-			return -EPROTO;
-
-		val[i] = items[i].integer.value;
-	}
-	return 0;
-}
+#define acpi_copy_property_array_uint(items, val, nval)			\
+	({								\
+		typeof(items) __items = items;				\
+		typeof(val) __val = val;				\
+		typeof(nval) __nval = nval;				\
+		size_t i;						\
+		int ret = 0;						\
+									\
+		for (i = 0; i < __nval; i++) {				\
+			if (__items[i].type != ACPI_TYPE_INTEGER) {	\
+				ret = -EPROTO;				\
+				break;					\
+			}						\
+			if (__items[i].integer.value > _Generic(__val,	\
+								u8: U8_MAX, \
+								u16: U16_MAX, \
+								u32: U32_MAX, \
+								u64: U64_MAX, \
+								default: 0U)) { \
+				ret = -EOVERFLOW;			\
+				break;					\
+			}						\
+									\
+			__val[i] = __items[i].integer.value;		\
+		}							\
+		ret;							\
+	})
 
 static int acpi_copy_property_array_string(const union acpi_object *items,
 					   char **val, size_t nval)
@@ -1025,16 +991,16 @@ static int acpi_data_prop_read(const struct acpi_device_data *data,
 
 	switch (proptype) {
 	case DEV_PROP_U8:
-		ret = acpi_copy_property_array_u8(items, (u8 *)val, nval);
+		ret = acpi_copy_property_array_uint(items, (u8 *)val, nval);
 		break;
 	case DEV_PROP_U16:
-		ret = acpi_copy_property_array_u16(items, (u16 *)val, nval);
+		ret = acpi_copy_property_array_uint(items, (u16 *)val, nval);
 		break;
 	case DEV_PROP_U32:
-		ret = acpi_copy_property_array_u32(items, (u32 *)val, nval);
+		ret = acpi_copy_property_array_uint(items, (u32 *)val, nval);
 		break;
 	case DEV_PROP_U64:
-		ret = acpi_copy_property_array_u64(items, (u64 *)val, nval);
+		ret = acpi_copy_property_array_uint(items, (u64 *)val, nval);
 		break;
 	case DEV_PROP_STRING:
 		ret = acpi_copy_property_array_string(
Signature · 1 line
2.30.2
#7 lore raw

PATCH v4 7/8 ACPI: property: Add support for parsing buffer property UUID

In reply to Sakari Ailus

Add support for newly added buffer property UUID, as defined in the DSD guide.

---
 drivers/acpi/property.c | 142 ++++++++++++++++++++++++++++++++++++----
 include/acpi/acpi_bus.h |   3 +-
 include/linux/acpi.h    |   2 +-
 3 files changed, 132 insertions(+), 15 deletions(-)
drivers/acpi/property.c +129 -13
index 236a847f1bfbd..7621f684212ff 100644
@@ -55,14 +55,19 @@ static const guid_t ads_guid =
 	GUID_INIT(0xdbb8e3e6, 0x5886, 0x4ba6,
 		  0x87, 0x95, 0x13, 0x19, 0xf5, 0x2a, 0x96, 0x6b);
 
+static const guid_t buffer_prop_guid =
+	GUID_INIT(0xedb12dd0, 0x363d, 0x4085,
+		  0xa3, 0xd2, 0x49, 0x52, 0x2c, 0xa1, 0x60, 0xc4);
+
 static bool acpi_enumerate_nondev_subnodes(acpi_handle scope,
-					   const union acpi_object *desc,
+					   union acpi_object *desc,
 					   struct acpi_device_data *data,
 					   struct fwnode_handle *parent);
-static bool acpi_extract_properties(const union acpi_object *desc,
+static bool acpi_extract_properties(acpi_handle handle,
+				    union acpi_object *desc,
 				    struct acpi_device_data *data);
 
-static bool acpi_nondev_subnode_extract(const union acpi_object *desc,
+static bool acpi_nondev_subnode_extract(union acpi_object *desc,
 					acpi_handle handle,
 					const union acpi_object *link,
 					struct list_head *list,
@@ -81,7 +86,7 @@ static bool acpi_nondev_subnode_extract(const union acpi_object *desc,
 	INIT_LIST_HEAD(&dn->data.properties);
 	INIT_LIST_HEAD(&dn->data.subnodes);
 
-	result = acpi_extract_properties(desc, &dn->data);
+	result = acpi_extract_properties(handle, desc, &dn->data);
 
 	if (handle) {
 		acpi_handle scope;
@@ -156,7 +161,7 @@ static bool acpi_nondev_subnode_ok(acpi_handle scope,
 }
 
 static bool acpi_add_nondev_subnodes(acpi_handle scope,
-				     const union acpi_object *links,
+				     union acpi_object *links,
 				     struct list_head *list,
 				     struct fwnode_handle *parent)
 {
@@ -164,7 +169,7 @@ static bool acpi_add_nondev_subnodes(acpi_handle scope,
 	int i;
 
 	for (i = 0; i < links->package.count; i++) {
-		const union acpi_object *link, *desc;
+		union acpi_object *link, *desc;
 		acpi_handle handle;
 		bool result;
 
@@ -204,7 +209,7 @@ static bool acpi_add_nondev_subnodes(acpi_handle scope,
 }
 
 static bool acpi_enumerate_nondev_subnodes(acpi_handle scope,
-					   const union acpi_object *desc,
+					   union acpi_object *desc,
 					   struct acpi_device_data *data,
 					   struct fwnode_handle *parent)
 {
@@ -212,7 +217,8 @@ static bool acpi_enumerate_nondev_subnodes(acpi_handle scope,
 
 	/* Look for the ACPI data subnodes GUID. */
 	for (i = 0; i < desc->package.count; i += 2) {
-		const union acpi_object *guid, *links;
+		const union acpi_object *guid;
+		union acpi_object *links;
 
 		guid = &desc->package.elements[i];
 		links = &desc->package.elements[i + 1];
@@ -325,7 +331,7 @@ static bool acpi_is_property_guid(const guid_t *guid)
 
 struct acpi_device_properties *
 acpi_data_add_props(struct acpi_device_data *data, const guid_t *guid,
-		    const union acpi_object *properties)
+		    union acpi_object *properties)
 {
 	struct acpi_device_properties *props;
 
@@ -377,7 +383,104 @@ static bool acpi_tie_nondev_subnodes(struct acpi_device_data *data)
 	return true;
 }
 
-static bool acpi_extract_properties(const union acpi_object *desc,
+static void acpi_data_add_buffer_props(acpi_handle handle,
+				       struct acpi_device_data *data,
+				       union acpi_object *properties)
+{
+	struct acpi_device_properties *props;
+	union acpi_object *package;
+	size_t alloc_size;
+	unsigned int i;
+	u32 *count;
+
+	if (check_mul_overflow((size_t)properties->package.count,
+			       sizeof(*package) + sizeof(void *),
+			       &alloc_size) ||
+	    check_add_overflow(sizeof(*props) + sizeof(*package), alloc_size,
+			       &alloc_size)) {
+		acpi_handle_warn(handle,
+				 "can't allocate memory for %u buffer props",
+				 properties->package.count);
+		return;
+	}
+
+	props = kvzalloc(alloc_size, GFP_KERNEL);
+	if (!props)
+		return;
+
+	props->guid = &buffer_prop_guid;
+	props->bufs = (void *)(props + 1);
+	props->properties = (void *)(props->bufs + properties->package.count);
+
+	/* Outer package */
+	package = props->properties;
+	package->type = ACPI_TYPE_PACKAGE;
+	package->package.elements = package + 1;
+	count = &package->package.count;
+	*count = 0;
+
+	/* Inner packages */
+	package++;
+
+	for (i = 0; i < properties->package.count; i++) {
+		struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
+		union acpi_object *property = &properties->package.elements[i];
+		union acpi_object *prop, *obj, *buf_obj;
+		acpi_status status;
+
+		if (property->type != ACPI_TYPE_PACKAGE ||
+		    property->package.count != 2) {
+			acpi_handle_warn(handle,
+					 "buffer property %u has %u entries\n",
+					 i, property->package.count);
+			continue;
+		}
+
+		prop = &property->package.elements[0];
+		obj = &property->package.elements[1];
+
+		if (prop->type != ACPI_TYPE_STRING ||
+		    obj->type != ACPI_TYPE_STRING) {
+			acpi_handle_warn(handle,
+					 "wrong object types %u and %u\n",
+					 prop->type, obj->type);
+			continue;
+		}
+
+		status = acpi_evaluate_object_typed(handle, obj->string.pointer,
+						    NULL, &buf,
+						    ACPI_TYPE_BUFFER);
+		if (ACPI_FAILURE(status)) {
+			acpi_handle_warn(handle,
+					 "can't evaluate \"%*pE\" as buffer\n",
+					 obj->string.length,
+					 obj->string.pointer);
+			continue;
+		}
+
+		package->type = ACPI_TYPE_PACKAGE;
+		package->package.elements = prop;
+		package->package.count = 2;
+
+		buf_obj = buf.pointer;
+
+		/* Replace the string object with a buffer object */
+		obj->type = ACPI_TYPE_BUFFER;
+		obj->buffer.length = buf_obj->buffer.length;
+		obj->buffer.pointer = buf_obj->buffer.pointer;
+
+		props->bufs[i] = buf.pointer;
+		package++;
+		(*count)++;
+	}
+
+	if (*count)
+		list_add(&props->list, &data->properties);
+	else
+		kvfree(props);
+}
+
+static bool acpi_extract_properties(acpi_handle scope, union acpi_object *desc,
 				    struct acpi_device_data *data)
 {
 	int i;
@@ -387,7 +490,8 @@ static bool acpi_extract_properties(const union acpi_object *desc,
 
 	/* Look for the device properties GUID. */
 	for (i = 0; i < desc->package.count; i += 2) {
-		const union acpi_object *guid, *properties;
+		const union acpi_object *guid;
+		union acpi_object *properties;
 
 		guid = &desc->package.elements[i];
 		properties = &desc->package.elements[i + 1];
@@ -401,6 +505,12 @@ static bool acpi_extract_properties(const union acpi_object *desc,
 		    properties->type != ACPI_TYPE_PACKAGE)
 			break;
 
+		if (guid_equal((guid_t *)guid->buffer.pointer,
+			       &buffer_prop_guid)) {
+			acpi_data_add_buffer_props(scope, data, properties);
+			continue;
+		}
+
 		if (!acpi_is_property_guid((guid_t *)guid->buffer.pointer))
 			continue;
 
@@ -447,7 +557,7 @@ void acpi_init_properties(struct acpi_device *adev)
 	if (ACPI_FAILURE(status))
 		goto out;
 
-	if (acpi_extract_properties(buf.pointer, &adev->data)) {
+	if (acpi_extract_properties(adev->handle, buf.pointer, &adev->data)) {
 		adev->data.pointer = buf.pointer;
 		if (acpi_of)
 			acpi_init_of_compatible(adev);
@@ -477,8 +587,14 @@ static void acpi_free_device_properties(struct list_head *list)
 	struct acpi_device_properties *props, *tmp;
 
 	list_for_each_entry_safe(props, tmp, list, list) {
+		u32 i;
+
 		list_del(&props->list);
-		kfree(props);
+		/* Buffer data properties were separately allocated */
+		if (props->bufs)
+			for (i = 0; i < props->properties->package.count; i++)
+				ACPI_FREE(props->bufs[i]);
+		kvfree(props);
 	}
 }
 
include/acpi/acpi_bus.h +2 -1
index 54c5566df9fe1..88a17fce49fd0 100644
@@ -344,8 +344,9 @@ struct acpi_device_physical_node {
 
 struct acpi_device_properties {
 	const guid_t *guid;
-	const union acpi_object *properties;
+	union acpi_object *properties;
 	struct list_head list;
+	void **bufs;
 };
 
 /* ACPI Device Specific Data (_DSD) */
include/linux/acpi.h +1 -1
index 4f82a5bc6d987..93a695cab9d8a 100644
@@ -1243,7 +1243,7 @@ static inline bool acpi_dev_has_props(const struct acpi_device *adev)
 
 struct acpi_device_properties *
 acpi_data_add_props(struct acpi_device_data *data, const guid_t *guid,
-		    const union acpi_object *properties);
+		    union acpi_object *properties);
 
 int acpi_node_prop_get(const struct fwnode_handle *fwnode, const char *propname,
 		       void **valptr);
Signature · 1 line
2.30.2
#8 lore raw

Re: [PATCH v4 7/8] ACPI: property: Add support for parsing buffer property UUID

Quoted 3 lines · Sakari Ailus

Add support for newly added buffer property UUID, as defined in the DSD guide.

A link to the DSD guide and a more specific reference to the relevant part of it (eg. section number) would be handy.

Quoted 274 lines
---
 drivers/acpi/property.c | 142 ++++++++++++++++++++++++++++++++++++----
 include/acpi/acpi_bus.h |   3 +-
 include/linux/acpi.h    |   2 +-
 3 files changed, 132 insertions(+), 15 deletions(-)
drivers/acpi/property.c +129 -13
index 236a847f1bfbd..7621f684212ff 100644
@@ -55,14 +55,19 @@ static const guid_t ads_guid =
        GUID_INIT(0xdbb8e3e6, 0x5886, 0x4ba6,
                  0x87, 0x95, 0x13, 0x19, 0xf5, 0x2a, 0x96, 0x6b);
 
+static const guid_t buffer_prop_guid =
+       GUID_INIT(0xedb12dd0, 0x363d, 0x4085,
+                 0xa3, 0xd2, 0x49, 0x52, 0x2c, 0xa1, 0x60, 0xc4);
+
 static bool acpi_enumerate_nondev_subnodes(acpi_handle scope,
-                                          const union acpi_object *desc,
+                                          union acpi_object *desc,
                                           struct acpi_device_data *data,
                                           struct fwnode_handle *parent);
-static bool acpi_extract_properties(const union acpi_object *desc,
+static bool acpi_extract_properties(acpi_handle handle,
+                                   union acpi_object *desc,
                                    struct acpi_device_data *data);
 
-static bool acpi_nondev_subnode_extract(const union acpi_object *desc,
+static bool acpi_nondev_subnode_extract(union acpi_object *desc,
                                        acpi_handle handle,
                                        const union acpi_object *link,
                                        struct list_head *list,
@@ -81,7 +86,7 @@ static bool acpi_nondev_subnode_extract(const union acpi_object *desc,
        INIT_LIST_HEAD(&dn->data.properties);
        INIT_LIST_HEAD(&dn->data.subnodes);
 
-       result = acpi_extract_properties(desc, &dn->data);
+       result = acpi_extract_properties(handle, desc, &dn->data);
 
        if (handle) {
                acpi_handle scope;
@@ -156,7 +161,7 @@ static bool acpi_nondev_subnode_ok(acpi_handle scope,
 }
 
 static bool acpi_add_nondev_subnodes(acpi_handle scope,
-                                    const union acpi_object *links,
+                                    union acpi_object *links,
                                     struct list_head *list,
                                     struct fwnode_handle *parent)
 {
@@ -164,7 +169,7 @@ static bool acpi_add_nondev_subnodes(acpi_handle scope,
        int i;
 
        for (i = 0; i < links->package.count; i++) {
-               const union acpi_object *link, *desc;
+               union acpi_object *link, *desc;
                acpi_handle handle;
                bool result;
 
@@ -204,7 +209,7 @@ static bool acpi_add_nondev_subnodes(acpi_handle scope,
 }
 
 static bool acpi_enumerate_nondev_subnodes(acpi_handle scope,
-                                          const union acpi_object *desc,
+                                          union acpi_object *desc,
                                           struct acpi_device_data *data,
                                           struct fwnode_handle *parent)
 {
@@ -212,7 +217,8 @@ static bool acpi_enumerate_nondev_subnodes(acpi_handle scope,
 
        /* Look for the ACPI data subnodes GUID. */
        for (i = 0; i < desc->package.count; i += 2) {
-               const union acpi_object *guid, *links;
+               const union acpi_object *guid;
+               union acpi_object *links;
 
                guid = &desc->package.elements[i];
                links = &desc->package.elements[i + 1];
@@ -325,7 +331,7 @@ static bool acpi_is_property_guid(const guid_t *guid)
 
 struct acpi_device_properties *
 acpi_data_add_props(struct acpi_device_data *data, const guid_t *guid,
-                   const union acpi_object *properties)
+                   union acpi_object *properties)
 {
        struct acpi_device_properties *props;
 
@@ -377,7 +383,104 @@ static bool acpi_tie_nondev_subnodes(struct acpi_device_data *data)
        return true;
 }
 
-static bool acpi_extract_properties(const union acpi_object *desc,
+static void acpi_data_add_buffer_props(acpi_handle handle,
+                                      struct acpi_device_data *data,
+                                      union acpi_object *properties)
+{
+       struct acpi_device_properties *props;
+       union acpi_object *package;
+       size_t alloc_size;
+       unsigned int i;
+       u32 *count;
+
+       if (check_mul_overflow((size_t)properties->package.count,
+                              sizeof(*package) + sizeof(void *),
+                              &alloc_size) ||
+           check_add_overflow(sizeof(*props) + sizeof(*package), alloc_size,
+                              &alloc_size)) {
+               acpi_handle_warn(handle,
+                                "can't allocate memory for %u buffer props",
+                                properties->package.count);
+               return;
+       }
+
+       props = kvzalloc(alloc_size, GFP_KERNEL);
+       if (!props)
+               return;
+
+       props->guid = &buffer_prop_guid;
+       props->bufs = (void *)(props + 1);
+       props->properties = (void *)(props->bufs + properties->package.count);
+
+       /* Outer package */
+       package = props->properties;
+       package->type = ACPI_TYPE_PACKAGE;
+       package->package.elements = package + 1;
+       count = &package->package.count;
+       *count = 0;
+
+       /* Inner packages */
+       package++;
+
+       for (i = 0; i < properties->package.count; i++) {
+               struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
+               union acpi_object *property = &properties->package.elements[i];
+               union acpi_object *prop, *obj, *buf_obj;
+               acpi_status status;
+
+               if (property->type != ACPI_TYPE_PACKAGE ||
+                   property->package.count != 2) {
+                       acpi_handle_warn(handle,
+                                        "buffer property %u has %u entries\n",
+                                        i, property->package.count);
+                       continue;
+               }
+
+               prop = &property->package.elements[0];
+               obj = &property->package.elements[1];
+
+               if (prop->type != ACPI_TYPE_STRING ||
+                   obj->type != ACPI_TYPE_STRING) {
+                       acpi_handle_warn(handle,
+                                        "wrong object types %u and %u\n",
+                                        prop->type, obj->type);
+                       continue;
+               }
+
+               status = acpi_evaluate_object_typed(handle, obj->string.pointer,
+                                                   NULL, &buf,
+                                                   ACPI_TYPE_BUFFER);
+               if (ACPI_FAILURE(status)) {
+                       acpi_handle_warn(handle,
+                                        "can't evaluate \"%*pE\" as buffer\n",
+                                        obj->string.length,
+                                        obj->string.pointer);
+                       continue;
+               }
+
+               package->type = ACPI_TYPE_PACKAGE;
+               package->package.elements = prop;
+               package->package.count = 2;
+
+               buf_obj = buf.pointer;
+
+               /* Replace the string object with a buffer object */
+               obj->type = ACPI_TYPE_BUFFER;
+               obj->buffer.length = buf_obj->buffer.length;
+               obj->buffer.pointer = buf_obj->buffer.pointer;
+
+               props->bufs[i] = buf.pointer;
+               package++;
+               (*count)++;
+       }
+
+       if (*count)
+               list_add(&props->list, &data->properties);
+       else
+               kvfree(props);
+}
+
+static bool acpi_extract_properties(acpi_handle scope, union acpi_object *desc,
                                    struct acpi_device_data *data)
 {
        int i;
@@ -387,7 +490,8 @@ static bool acpi_extract_properties(const union acpi_object *desc,
 
        /* Look for the device properties GUID. */
        for (i = 0; i < desc->package.count; i += 2) {
-               const union acpi_object *guid, *properties;
+               const union acpi_object *guid;
+               union acpi_object *properties;
 
                guid = &desc->package.elements[i];
                properties = &desc->package.elements[i + 1];
@@ -401,6 +505,12 @@ static bool acpi_extract_properties(const union acpi_object *desc,
                    properties->type != ACPI_TYPE_PACKAGE)
                        break;
 
+               if (guid_equal((guid_t *)guid->buffer.pointer,
+                              &buffer_prop_guid)) {
+                       acpi_data_add_buffer_props(scope, data, properties);
+                       continue;
+               }
+
                if (!acpi_is_property_guid((guid_t *)guid->buffer.pointer))
                        continue;
 
@@ -447,7 +557,7 @@ void acpi_init_properties(struct acpi_device *adev)
        if (ACPI_FAILURE(status))
                goto out;
 
-       if (acpi_extract_properties(buf.pointer, &adev->data)) {
+       if (acpi_extract_properties(adev->handle, buf.pointer, &adev->data)) {
                adev->data.pointer = buf.pointer;
                if (acpi_of)
                        acpi_init_of_compatible(adev);
@@ -477,8 +587,14 @@ static void acpi_free_device_properties(struct list_head *list)
        struct acpi_device_properties *props, *tmp;
 
        list_for_each_entry_safe(props, tmp, list, list) {
+               u32 i;
+
                list_del(&props->list);
-               kfree(props);
+               /* Buffer data properties were separately allocated */
+               if (props->bufs)
+                       for (i = 0; i < props->properties->package.count; i++)
+                               ACPI_FREE(props->bufs[i]);
+               kvfree(props);
        }
 }
 
include/acpi/acpi_bus.h +2 -1
index 54c5566df9fe1..88a17fce49fd0 100644
@@ -344,8 +344,9 @@ struct acpi_device_physical_node {
 
 struct acpi_device_properties {
        const guid_t *guid;
-       const union acpi_object *properties;
+       union acpi_object *properties;
        struct list_head list;
+       void **bufs;
 };
 
 /* ACPI Device Specific Data (_DSD) */
include/linux/acpi.h +1 -2
index 4f82a5bc6d987..93a695cab9d8a 100644
@@ -1243,7 +1243,7 @@ static inline bool acpi_dev_has_props(const struct acpi_device *adev)
 
 struct acpi_device_properties *
 acpi_data_add_props(struct acpi_device_data *data, const guid_t *guid,
-                   const union acpi_object *properties);
+                   union acpi_object *properties);
 
 int acpi_node_prop_get(const struct fwnode_handle *fwnode, const char *propname,
                       void **valptr);
--

2.30.2

#9 lore raw

Re: [PATCH v4 7/8] ACPI: property: Add support for parsing buffer property UUID

Hi Rafael,

Thanks for the review.

Quoted 8 lines · Rafael J. Wysocki
Quoted 3 lines · Sakari Ailus

Add support for newly added buffer property UUID, as defined in the DSD guide.

A link to the DSD guide and a more specific reference to the relevant part of it (eg. section number) would be handy.

That would be 3.3 <URL:https://github.com/UEFI/DSD-Guide/blob/main/src/dsd-guide.adoc#buffer-data-extension-uuid>.

I'll add that for v5.

Signature · 1 line
Sakari Ailus
#10 lore raw

Re: [PATCH v4 7/8] ACPI: property: Add support for parsing buffer property UUID

Quoted 12 lines · Sakari Ailus

Hi Rafael,

Thanks for the review.

Quoted 6 lines · Rafael J. Wysocki
Quoted 3 lines · Sakari Ailus

Add support for newly added buffer property UUID, as defined in the DSD guide.

Quoted 7 lines
Quoted 2 lines

A link to the DSD guide and a more specific reference to the relevant part of it (eg. section number) would be handy.

That would be 3.3 <URL:https://github.com/UEFI/DSD-Guide/blob/main/src/dsd-guide.adoc#buffer-data-extension-uuid>.

I'll add that for v5.

The rest of the patches in the series look fine to me, so please just send an update of this one.

#11 lore raw

PATCH v5 7/8 ACPI: property: Add support for parsing buffer property UUID

Add support for newly added buffer property UUID, as defined in the DSD
guide section 3.3 <URL:https://github.com/UEFI/DSD-Guide/blob/main/src/dsd-guide.adoc#buffer-data-extension-uuid>.

---
since v4:

Refer to DSD guide section 3.3, with URL.

 drivers/acpi/property.c | 142 ++++++++++++++++++++++++++++++++++++----
 include/acpi/acpi_bus.h |   3 +-
 include/linux/acpi.h    |   2 +-
 3 files changed, 132 insertions(+), 15 deletions(-)
drivers/acpi/property.c +129 -13
index 236a847f1bfbd..7621f684212ff 100644
@@ -55,14 +55,19 @@ static const guid_t ads_guid =
 	GUID_INIT(0xdbb8e3e6, 0x5886, 0x4ba6,
 		  0x87, 0x95, 0x13, 0x19, 0xf5, 0x2a, 0x96, 0x6b);
 
+static const guid_t buffer_prop_guid =
+	GUID_INIT(0xedb12dd0, 0x363d, 0x4085,
+		  0xa3, 0xd2, 0x49, 0x52, 0x2c, 0xa1, 0x60, 0xc4);
+
 static bool acpi_enumerate_nondev_subnodes(acpi_handle scope,
-					   const union acpi_object *desc,
+					   union acpi_object *desc,
 					   struct acpi_device_data *data,
 					   struct fwnode_handle *parent);
-static bool acpi_extract_properties(const union acpi_object *desc,
+static bool acpi_extract_properties(acpi_handle handle,
+				    union acpi_object *desc,
 				    struct acpi_device_data *data);
 
-static bool acpi_nondev_subnode_extract(const union acpi_object *desc,
+static bool acpi_nondev_subnode_extract(union acpi_object *desc,
 					acpi_handle handle,
 					const union acpi_object *link,
 					struct list_head *list,
@@ -81,7 +86,7 @@ static bool acpi_nondev_subnode_extract(const union acpi_object *desc,
 	INIT_LIST_HEAD(&dn->data.properties);
 	INIT_LIST_HEAD(&dn->data.subnodes);
 
-	result = acpi_extract_properties(desc, &dn->data);
+	result = acpi_extract_properties(handle, desc, &dn->data);
 
 	if (handle) {
 		acpi_handle scope;
@@ -156,7 +161,7 @@ static bool acpi_nondev_subnode_ok(acpi_handle scope,
 }
 
 static bool acpi_add_nondev_subnodes(acpi_handle scope,
-				     const union acpi_object *links,
+				     union acpi_object *links,
 				     struct list_head *list,
 				     struct fwnode_handle *parent)
 {
@@ -164,7 +169,7 @@ static bool acpi_add_nondev_subnodes(acpi_handle scope,
 	int i;
 
 	for (i = 0; i < links->package.count; i++) {
-		const union acpi_object *link, *desc;
+		union acpi_object *link, *desc;
 		acpi_handle handle;
 		bool result;
 
@@ -204,7 +209,7 @@ static bool acpi_add_nondev_subnodes(acpi_handle scope,
 }
 
 static bool acpi_enumerate_nondev_subnodes(acpi_handle scope,
-					   const union acpi_object *desc,
+					   union acpi_object *desc,
 					   struct acpi_device_data *data,
 					   struct fwnode_handle *parent)
 {
@@ -212,7 +217,8 @@ static bool acpi_enumerate_nondev_subnodes(acpi_handle scope,
 
 	/* Look for the ACPI data subnodes GUID. */
 	for (i = 0; i < desc->package.count; i += 2) {
-		const union acpi_object *guid, *links;
+		const union acpi_object *guid;
+		union acpi_object *links;
 
 		guid = &desc->package.elements[i];
 		links = &desc->package.elements[i + 1];
@@ -325,7 +331,7 @@ static bool acpi_is_property_guid(const guid_t *guid)
 
 struct acpi_device_properties *
 acpi_data_add_props(struct acpi_device_data *data, const guid_t *guid,
-		    const union acpi_object *properties)
+		    union acpi_object *properties)
 {
 	struct acpi_device_properties *props;
 
@@ -377,7 +383,104 @@ static bool acpi_tie_nondev_subnodes(struct acpi_device_data *data)
 	return true;
 }
 
-static bool acpi_extract_properties(const union acpi_object *desc,
+static void acpi_data_add_buffer_props(acpi_handle handle,
+				       struct acpi_device_data *data,
+				       union acpi_object *properties)
+{
+	struct acpi_device_properties *props;
+	union acpi_object *package;
+	size_t alloc_size;
+	unsigned int i;
+	u32 *count;
+
+	if (check_mul_overflow((size_t)properties->package.count,
+			       sizeof(*package) + sizeof(void *),
+			       &alloc_size) ||
+	    check_add_overflow(sizeof(*props) + sizeof(*package), alloc_size,
+			       &alloc_size)) {
+		acpi_handle_warn(handle,
+				 "can't allocate memory for %u buffer props",
+				 properties->package.count);
+		return;
+	}
+
+	props = kvzalloc(alloc_size, GFP_KERNEL);
+	if (!props)
+		return;
+
+	props->guid = &buffer_prop_guid;
+	props->bufs = (void *)(props + 1);
+	props->properties = (void *)(props->bufs + properties->package.count);
+
+	/* Outer package */
+	package = props->properties;
+	package->type = ACPI_TYPE_PACKAGE;
+	package->package.elements = package + 1;
+	count = &package->package.count;
+	*count = 0;
+
+	/* Inner packages */
+	package++;
+
+	for (i = 0; i < properties->package.count; i++) {
+		struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
+		union acpi_object *property = &properties->package.elements[i];
+		union acpi_object *prop, *obj, *buf_obj;
+		acpi_status status;
+
+		if (property->type != ACPI_TYPE_PACKAGE ||
+		    property->package.count != 2) {
+			acpi_handle_warn(handle,
+					 "buffer property %u has %u entries\n",
+					 i, property->package.count);
+			continue;
+		}
+
+		prop = &property->package.elements[0];
+		obj = &property->package.elements[1];
+
+		if (prop->type != ACPI_TYPE_STRING ||
+		    obj->type != ACPI_TYPE_STRING) {
+			acpi_handle_warn(handle,
+					 "wrong object types %u and %u\n",
+					 prop->type, obj->type);
+			continue;
+		}
+
+		status = acpi_evaluate_object_typed(handle, obj->string.pointer,
+						    NULL, &buf,
+						    ACPI_TYPE_BUFFER);
+		if (ACPI_FAILURE(status)) {
+			acpi_handle_warn(handle,
+					 "can't evaluate \"%*pE\" as buffer\n",
+					 obj->string.length,
+					 obj->string.pointer);
+			continue;
+		}
+
+		package->type = ACPI_TYPE_PACKAGE;
+		package->package.elements = prop;
+		package->package.count = 2;
+
+		buf_obj = buf.pointer;
+
+		/* Replace the string object with a buffer object */
+		obj->type = ACPI_TYPE_BUFFER;
+		obj->buffer.length = buf_obj->buffer.length;
+		obj->buffer.pointer = buf_obj->buffer.pointer;
+
+		props->bufs[i] = buf.pointer;
+		package++;
+		(*count)++;
+	}
+
+	if (*count)
+		list_add(&props->list, &data->properties);
+	else
+		kvfree(props);
+}
+
+static bool acpi_extract_properties(acpi_handle scope, union acpi_object *desc,
 				    struct acpi_device_data *data)
 {
 	int i;
@@ -387,7 +490,8 @@ static bool acpi_extract_properties(const union acpi_object *desc,
 
 	/* Look for the device properties GUID. */
 	for (i = 0; i < desc->package.count; i += 2) {
-		const union acpi_object *guid, *properties;
+		const union acpi_object *guid;
+		union acpi_object *properties;
 
 		guid = &desc->package.elements[i];
 		properties = &desc->package.elements[i + 1];
@@ -401,6 +505,12 @@ static bool acpi_extract_properties(const union acpi_object *desc,
 		    properties->type != ACPI_TYPE_PACKAGE)
 			break;
 
+		if (guid_equal((guid_t *)guid->buffer.pointer,
+			       &buffer_prop_guid)) {
+			acpi_data_add_buffer_props(scope, data, properties);
+			continue;
+		}
+
 		if (!acpi_is_property_guid((guid_t *)guid->buffer.pointer))
 			continue;
 
@@ -447,7 +557,7 @@ void acpi_init_properties(struct acpi_device *adev)
 	if (ACPI_FAILURE(status))
 		goto out;
 
-	if (acpi_extract_properties(buf.pointer, &adev->data)) {
+	if (acpi_extract_properties(adev->handle, buf.pointer, &adev->data)) {
 		adev->data.pointer = buf.pointer;
 		if (acpi_of)
 			acpi_init_of_compatible(adev);
@@ -477,8 +587,14 @@ static void acpi_free_device_properties(struct list_head *list)
 	struct acpi_device_properties *props, *tmp;
 
 	list_for_each_entry_safe(props, tmp, list, list) {
+		u32 i;
+
 		list_del(&props->list);
-		kfree(props);
+		/* Buffer data properties were separately allocated */
+		if (props->bufs)
+			for (i = 0; i < props->properties->package.count; i++)
+				ACPI_FREE(props->bufs[i]);
+		kvfree(props);
 	}
 }
 
include/acpi/acpi_bus.h +2 -1
index 54c5566df9fe1..88a17fce49fd0 100644
@@ -344,8 +344,9 @@ struct acpi_device_physical_node {
 
 struct acpi_device_properties {
 	const guid_t *guid;
-	const union acpi_object *properties;
+	union acpi_object *properties;
 	struct list_head list;
+	void **bufs;
 };
 
 /* ACPI Device Specific Data (_DSD) */
include/linux/acpi.h +1 -1
index 4f82a5bc6d987..93a695cab9d8a 100644
@@ -1243,7 +1243,7 @@ static inline bool acpi_dev_has_props(const struct acpi_device *adev)
 
 struct acpi_device_properties *
 acpi_data_add_props(struct acpi_device_data *data, const guid_t *guid,
-		    const union acpi_object *properties);
+		    union acpi_object *properties);
 
 int acpi_node_prop_get(const struct fwnode_handle *fwnode, const char *propname,
 		       void **valptr);
Signature · 1 line
2.30.2
#12 lore raw

PATCH v4 8/8 ACPI: property: Read buffer properties as integers

In reply to Sakari Ailus

Instead of adding a new property type, read buffer properties as integers. Even though the internal representation in ACPI is different, the data type is the same (byte) than on 8-bit integers.

---
 drivers/acpi/property.c | 35 +++++++++++++++++++++++++++++++----
 1 file changed, 31 insertions(+), 4 deletions(-)
drivers/acpi/property.c +31 -4
index 7621f684212ff..9711482014a60 100644
@@ -1033,6 +1033,10 @@ static int acpi_data_prop_read_single(const struct acpi_device_data *data,
 		int ret = 0;						\
 									\
 		for (i = 0; i < __nval; i++) {				\
+			if (__items->type == ACPI_TYPE_BUFFER) {	\
+				__val[i] = __items->buffer.pointer[i];	\
+				continue;				\
+			}						\
 			if (__items[i].type != ACPI_TYPE_INTEGER) {	\
 				ret = -EPROTO;				\
 				break;					\
@@ -1092,18 +1096,41 @@ static int acpi_data_prop_read(const struct acpi_device_data *data,
 	}
 
 	ret = acpi_data_get_property_array(data, propname, ACPI_TYPE_ANY, &obj);
+	if (ret && proptype >= DEV_PROP_U8 && proptype <= DEV_PROP_U64)
+		ret = acpi_data_get_property(data, propname, ACPI_TYPE_BUFFER,
+					     &obj);
 	if (ret)
 		return ret;
 
-	if (!val)
+	if (!val) {
+		if (obj->type == ACPI_TYPE_BUFFER)
+			return obj->buffer.length;
+
 		return obj->package.count;
+	}
 
-	if (proptype != DEV_PROP_STRING && nval > obj->package.count)
-		return -EOVERFLOW;
+	switch (proptype) {
+	case DEV_PROP_STRING:
+		break;
+	case DEV_PROP_U8 ... DEV_PROP_U64:
+		if (obj->type == ACPI_TYPE_BUFFER) {
+			if (nval > obj->buffer.length)
+				return -EOVERFLOW;
+			break;
+		}
+		fallthrough;
+	default:
+		if (nval > obj->package.count)
+			return -EOVERFLOW;
+		break;
+	}
 	if (nval == 0)
 		return -EINVAL;
 
-	items = obj->package.elements;
+	if (obj->type != ACPI_TYPE_BUFFER)
+		items = obj->package.elements;
+	else
+		items = obj;
 
 	switch (proptype) {
 	case DEV_PROP_U8:
Signature · 1 line
2.30.2
#13 lore raw
In reply to Sakari Ailus
Quoted 49 lines · Sakari Ailus

Hello everyone,

This set adds support for _DSD buffer properties (specified by DSD Guide <URL:https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.md>) as well as support for references as strings. Reference property type was previously supported for device objects only, whereas string references enable referencing also _DSD sub-node objects --- also included in the set.

The ACPICA patch has been submitted to upstream but not merged yet.

This set currently prepares for data node string reference support and does not add it anymore.

since v3:

- Use bool return type for acpi_tie_nondev_subnodes. Return false on failure.

- Print ACPI buffer parsing error references as %*pE (was %s).

- Unwrap a few lines (i.e. non-functional changes).

- Declare local variables for acpi_copy_property_array_uint().

- Clean up buffer size check in acpi_data_prop_read(), add break at the end of the default case.

since v2:

- Use C99 _Generic() in patch unifying reading integer arrays.

since v1:

- Drop the ACPICA, data node child list initialisation and data node string reference patches.

Sakari Ailus (8):
ACPI: property: Return type of acpi_add_nondev_subnodes() should be
bool
ACPI: property: Tie data nodes to acpi handles
ACPI: property: Use acpi_object_type consistently in property ref
parsing
ACPI: property: Move property ref argument parsing into a new function
ACPI: property: Switch node property referencing from ifs to a switch
ACPI: property: Unify integer value reading functions
ACPI: property: Add support for parsing buffer property UUID
ACPI: property: Read buffer properties as integers

Quoted 6 lines
 drivers/acpi/property.c | 465 +++++++++++++++++++++++++++-------------
 include/acpi/acpi_bus.h |   3 +-
 include/linux/acpi.h    |   2 +-
 3 files changed, 318 insertions(+), 152 deletions(-)

--

The series (including the update of patch [7/8]) has been applied as 5.20 material, thanks!

#14 lore raw
Quoted 9 lines · Rafael J. Wysocki
Quoted 6 lines
 drivers/acpi/property.c | 465 +++++++++++++++++++++++++++-------------
 include/acpi/acpi_bus.h |   3 +-
 include/linux/acpi.h    |   2 +-
 3 files changed, 318 insertions(+), 152 deletions(-)

--

The series (including the update of patch [7/8]) has been applied as 5.20 material, thanks!

Thank you!

Thanks to Andy for reviews, too!

Signature · 1 line
Sakari Ailus