Add support for BSH smm s2 [pro] boards
v3 cover Add support for BSH smm s2 [pro] boards
The series applies the changes requested by Arnout Vandecappelle to the V3 patch for adding support to BSH smm s2 pro board ([1]). It also adds the support for the BSH smm s2 board and It builds the uuu package, used for flashing the boards, as part of buildroot.
[1] https://patchwork.ozlabs.org/project/buildroot/patch/[email protected]/
Changes in v3:
- Update the commit description.
- Bump U-Boot to version 2022-07.
- Remove U-Boot patches merged in version 2022-07.
- Update the Linux patches.
Changes in v2:
- Drop the patch that added the 'uuu' package. It has been merged.
- Patch 1/2: "configs/imx8mn_bsh_smm_s2_defconfig: new defconfig":
- Change commit subject and description.
- Update linux patch to version 4. It hasn't been merged yet but has been reviewed. This is the most up-to-date version.
- Replace Co-developed-by:' tag with Co-authored-by'.
- Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and a config fragment for the changes.
- Remove useless and deprecated statements in nand-full.lst.
- Remove the buildroot configurations for ext2/ext4 filesystem creation.
- Patch 2/2: "configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig":
- Change commit subject line.
- Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and a config fragment for the changes.
Dario Binacchi (1):
configs/imx8mn_bsh_smm_s2_defconfig: new defconfig
Michael Trimarchi (1):
configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig
DEVELOPERS | 8 + .../common/imx8mn-bsh-smm-s2/linux.fragment | 931 ++++++++++++++++++ board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf | 4 + board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh | 23 + board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg | 17 + board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh | 7 + board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh | 3 + board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt | 73 ++ board/bsh/imx8mn-bsh-smm-s2/flash.sh | 26 + board/bsh/imx8mn-bsh-smm-s2/nand-full.lst | 29 + ...dmaengine-mxs-fix-driver-registering.patch | 69 ++ ..._nand-Fix-specific-hook-registration.patch | 78 ++ ...-mxs_nand_spl-Fix-bad-block-skipping.patch | 165 ++++ ...x-cmd_nandbcb-fix-bad-block-handling.patch | 95 ++ ...d-Fix-bad-block-handling-in-fitImage.patch | 42 + ...h-to-nand-spl-load-instead-of-romapi.patch | 30 + ...Remove-rootwait-1-to-all-the-affecte.patch | 159 +++ ...gs-imx8mn_bsh_smm_s2-add-NAND-driver.patch | 42 + ...s-imx8mn_bsh_smm_s2-add-UBI-commands.patch | 29 + ...sh_smm_s2-remove-console-from-bootar.patch | 32 + ..._bsh_smm_s2-add-mtdparts-to-bootargs.patch | 30 + board/bsh/imx8mn-bsh-smm-s2/post-build.sh | 4 + board/bsh/imx8mn-bsh-smm-s2/readme.txt | 75 ++ configs/imx8mn_bsh_smm_s2_defconfig | 40 + configs/imx8mn_bsh_smm_s2_pro_defconfig | 41 + 25 files changed, 2052 insertions(+) create mode 100644 board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt create mode 100755 board/bsh/imx8mn-bsh-smm-s2/flash.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-fix-driver-registering.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-nand-raw-mxs_nand-Fix-specific-hook-registration.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0002-mtd-nand-mxs_nand_spl-Fix-bad-block-skipping.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0003-arm-mach-imx-cmd_nandbcb-fix-bad-block-handling.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0004-spl-spl_nand-Fix-bad-block-handling-in-fitImage.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0005-board-bsh-Switch-to-nand-spl-load-instead-of-romapi.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0006-include-configs-Remove-rootwait-1-to-all-the-affecte.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0007-configs-imx8mn_bsh_smm_s2-add-NAND-driver.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0008-configs-imx8mn_bsh_smm_s2-add-UBI-commands.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0009-configs-imx8mn_bsh_smm_s2-remove-console-from-bootar.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0010-configs-imx8mn_bsh_smm_s2-add-mtdparts-to-bootargs.patch create mode 100755 board/bsh/imx8mn-bsh-smm-s2/post-build.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2/readme.txt create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig create mode 100644 configs/imx8mn_bsh_smm_s2_pro_defconfig
Signature · 6 lines
2.32.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v3 1/2 configs/imx8mn_bsh_smm_s2_defconfig: new defconfig
BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide input and output interfaces to a dedicated carrier board. It is designed mainly to provide graphical/video and connectivity interfaces to the appliance.
Board support package includes the following components:
- mainline Linux kernel 5.18
- mainline U-Boot 2022-07
- default packages from buildroot
Patches applied to the Linux kernel and U-Boot have been submitted but not merged yet.
---
Changes in v3:
- Update the commit description.
- Bump U-Boot to version 2022-07.
- Remove U-Boot patches merged in version 2022-07.
- Update the Linux patches.
Changes in v2:
- Change commit subject and description.
- Update linux patch to version 4. It hasn't been merged yet but has been reviewed. This is the most up-to-date version.
- Replace Co-developed-by:' tag with Co-authored-by'.
- Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and a config fragment for the changes.
- Remove useless and deprecated statements in nand-full.lst.
- Remove the buildroot configurations for ext2/ext4 filesystem creation.
--- DEVELOPERS | 4 + board/bsh/imx8mn-bsh-smm-s2/flash.sh | 26 + board/bsh/imx8mn-bsh-smm-s2/linux.fragment | 931 ++++++++++++++++++ board/bsh/imx8mn-bsh-smm-s2/nand-full.lst | 29 + ...ine-mxs-use-platform_driver_register.patch | 64 ++ ...2-dmaengine-mxs-fix-section-mismatch.patch | 35 + ...Remove-rootwait-1-to-all-the-affecte.patch | 159 +++ board/bsh/imx8mn-bsh-smm-s2/post-build.sh | 4 + board/bsh/imx8mn-bsh-smm-s2/readme.txt | 75 ++ configs/imx8mn_bsh_smm_s2_defconfig | 40 + 10 files changed, 1367 insertions(+) create mode 100755 board/bsh/imx8mn-bsh-smm-s2/flash.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2/linux.fragment create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch create mode 100755 board/bsh/imx8mn-bsh-smm-s2/post-build.sh create mode 100644 board/bsh/imx8mn-bsh-smm-s2/readme.txt create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig
DEVELOPERS +4 -0
@@ -657,6 +657,8 @@ F: package/luaexpat/ F: package/xinetd/ N: Dario Binacchi <[email protected]> +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_defconfig F: package/uuu/ N: Dario Binacchi <[email protected]>
@@ -2045,6 +2047,8 @@ F: package/python-crc16/ F: package/python-pyzmq/ N: Michael Trimarchi <[email protected]> +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_defconfig F: package/python-spidev/ N: Michael Vetter <[email protected]>
board/bsh/imx8mn-bsh-smm-s2/flash.sh new file +26 -0
@@ -0,0 +1,26 @@ +#!/bin/bash + +if [ $# -eq 0 ]; then + OUTPUT_DIR=output +else + OUTPUT_DIR=$1 +fi + +if ! test -d "${OUTPUT_DIR}" ; then + echo "ERROR: no output directory specified." + echo "Usage: $0 OUTPUT_DIR" + echo "" + echo "Arguments:" + echo " OUTPUT_DIR The Buildroot output directory." + exit 1 +fi + +IMAGES_DIR=${OUTPUT_DIR}/images + +${OUTPUT_DIR}/host/bin/uuu -v -b ${IMAGES_DIR}/nand-full.lst \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/rootfs.ubifs \ + ${IMAGES_DIR}/Image \ + ${IMAGES_DIR}/freescale/imx8mn-bsh-smm-s2.dtb +
board/bsh/imx8mn-bsh-smm-s2/linux.fragment new file +931 -0
931 lines not on this page · raw message
board/bsh/imx8mn-bsh-smm-s2/nand-full.lst new file +29 -0
@@ -0,0 +1,29 @@ +# @_flash.bin | bootloader +# @_image [_flash.bin] | image burn to nand, default is the same as bootloader +# @_filesystem | filesystem to burn +# @_kernel | kernel image +# @_dtb | dtb image + +# This command will be run when ROM support stream mode +# i.MX8QXP, i.MX8QM +SDPS: boot -f _flash.bin + +FB: ucmd setenv fastboot_buffer ${loadaddr} +FB: download -f _image +# Burn image to nandfit partition if needed +FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi; +FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize} + +FB[-t 10000]: ucmd ubi part nandrootfs +FB[-t 10000]: ucmd ubi create root - +FB: download -f _filesystem +FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize} + +FB: download -f _kernel +FB[-t 10000]: ucmd nand write ${loadaddr} nandkernel ${filesize} + +FB: download -f _dtb +FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize} + +FB: reboot +FB: done
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch new file +64 -0
64 lines not on this page · raw message
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch new file +35 -0
@@ -0,0 +1,35 @@ +From 145ee0b2e192da90348f1c77ea9c69ba7001159c Mon Sep 17 00:00:00 2001 +From: Dario Binacchi <[email protected]> +Date: Tue, 12 Jul 2022 15:15:19 +0200 +Subject: [PATCH 2/2] dmaengine: mxs: fix section mismatch + +The patch was suggested by the following modpost warning: + +WARNING: modpost: vmlinux.o(.data+0xa3900): Section mismatch in reference from the variable mxs_dma_driver to the function .init.text:mxs_dma_probe() +The variable mxs_dma_driver references +the function __init mxs_dma_probe() +If the reference is valid then annotate the +variable with __init* or __refdata (see linux/init.h) or name the variable: +*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console + +Signed-off-by: Dario Binacchi <[email protected]> +--- + drivers/dma/mxs-dma.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c +index 18f8154b859b..a01953e06048 100644 +--- a/drivers/dma/mxs-dma.c ++++ b/drivers/dma/mxs-dma.c +@@ -834,7 +834,7 @@ static int __init mxs_dma_probe(struct platform_device *pdev) + return 0; + } + +-static struct platform_driver mxs_dma_driver = { ++static struct platform_driver mxs_dma_driver __initdata = { + .driver = { + .name = "mxs-dma", + .of_match_table = mxs_dma_dt_ids, +-- +2.32.0 +
board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch new file +159 -0
159 lines not on this page · raw message
board/bsh/imx8mn-bsh-smm-s2/post-build.sh new file +4 -0
@@ -0,0 +1,4 @@ +#!/bin/sh +BOARD_DIR="$(dirname $0)" + +cp ${BOARD_DIR}/nand-full.lst ${BINARIES_DIR}
board/bsh/imx8mn-bsh-smm-s2/readme.txt new file +75 -0
75 lines not on this page · raw message
configs/imx8mn_bsh_smm_s2_defconfig new file +40 -0
@@ -0,0 +1,40 @@ +BR2_aarch64=y +BR2_GLOBAL_PATCH_DIR="board/bsh/imx8mn-bsh-smm-s2/patches" +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2/post-build.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2" +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_PACKAGE_FIRMWARE_IMX_DDR3=y +BR2_TARGET_ROOTFS_UBIFS=y +BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000 +BR2_TARGET_ROOTFS_UBIFS_RT_NONE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin" +BR2_TARGET_UBOOT_SPL=y +BR2_PACKAGE_HOST_UUU=y
Signature · 6 lines
2.32.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v3 1/2] configs/imx8mn_bsh_smm_s2_defconfig: new defconfig
Hi Dario, Michael, Ariel, All,
Quoted 4 lines · Dario Binacchi
BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide input and output interfaces to a dedicated carrier board. It is designed mainly to provide graphical/video and connectivity interfaces to the appliance.
Can you please provide an URL to the product here in commit log?
Quoted 1,035 lines
Board support package includes the following components:
- mainline Linux kernel 5.18
- mainline U-Boot 2022-07
- default packages from buildrootPatches applied to the Linux kernel and U-Boot have been submitted but not merged yet.
Co-authored-by Michael Trimarchi <[email protected]>Signed-off-by Michael Trimarchi <[email protected]>Signed-off-by Dario Binacchi <[email protected]>---
Changes in v3:
- Update the commit description.
- Bump U-Boot to version 2022-07.
- Remove U-Boot patches merged in version 2022-07.
- Update the Linux patches.Changes in v2:
- Change commit subject and description.
- Update linux patch to version 4. It hasn't been merged yet but has been reviewed. This is the most up-to-date version.
- ReplaceCo-developed-by:' tag withCo-authored-by'.
- Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and a config fragment for the changes.
- Remove useless and deprecated statements in nand-full.lst.
- Remove the buildroot configurations for ext2/ext4 filesystem creation.Signed-off-by Dario Binacchi <[email protected]>--- DEVELOPERS | 4 + board/bsh/imx8mn-bsh-smm-s2/flash.sh | 26 + board/bsh/imx8mn-bsh-smm-s2/linux.fragment | 931 ++++++++++++++++++ board/bsh/imx8mn-bsh-smm-s2/nand-full.lst | 29 + ...ine-mxs-use-platform_driver_register.patch | 64 ++ ...2-dmaengine-mxs-fix-section-mismatch.patch | 35 + ...Remove-rootwait-1-to-all-the-affecte.patch | 159 +++ board/bsh/imx8mn-bsh-smm-s2/post-build.sh | 4 + board/bsh/imx8mn-bsh-smm-s2/readme.txt | 75 ++ configs/imx8mn_bsh_smm_s2_defconfig | 40 + 10 files changed, 1367 insertions(+)create mode 100755
board/bsh/imx8mn-bsh-smm-s2/flash.sh
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/linux.fragment
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
create mode 100644board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patchcreate mode 100644board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patchcreate mode 100644board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patchcreate mode 100755board/bsh/imx8mn-bsh-smm-s2/post-build.sh
create mode 100644board/bsh/imx8mn-bsh-smm-s2/readme.txt
create mode 100644 configs/imx8mn_bsh_smm_s2_defconfigDEVELOPERS +4
-0@@ -657,6 +657,8 @@ F: package/luaexpat/ F: package/xinetd/ N: Dario Binacchi <[email protected]> +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_defconfig F: package/uuu/ N: Dario Binacchi <[email protected]>@@ -2045,6 +2047,8 @@ F: package/python-crc16/ F: package/python-pyzmq/ N: Michael Trimarchi <[email protected]> +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_defconfig F: package/python-spidev/ N: Michael Vetter <[email protected]>board/bsh/imx8mn-bsh-smm-s2/flash.sh new file +26
-0@@ -0,0 +1,26 @@ +#!/bin/bash + +if [ $# -eq 0 ]; then + OUTPUT_DIR=output +else + OUTPUT_DIR=$1 +fi + +if ! test -d "${OUTPUT_DIR}" ; then + echo "ERROR: no output directory specified." + echo "Usage: $0 OUTPUT_DIR" + echo "" + echo "Arguments:" + echo " OUTPUT_DIR The Buildroot output directory." + exit 1 +fi + +IMAGES_DIR=${OUTPUT_DIR}/images + +${OUTPUT_DIR}/host/bin/uuu -v -b ${IMAGES_DIR}/nand-full.lst \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/rootfs.ubifs \ + ${IMAGES_DIR}/Image \ + ${IMAGES_DIR}/freescale/imx8mn-bsh-smm-s2.dtb +board/bsh/imx8mn-bsh-smm-s2/linux.fragment new file +921
-0@@ -0,0 +1,931 @@ +# CONFIG_BPF_SYSCALL is not set +# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set +CONFIG_TASK_DELAY_ACCT=y +CONFIG_CGROUP_FREEZER=y +# CONFIG_CGROUP_BPF is not set +CONFIG_RELAY=y +# CONFIG_ARCH_ACTIONS is not set +# CONFIG_ARCH_SUNXI is not set +# CONFIG_ARCH_ALPINE is not set +# CONFIG_ARCH_APPLE is not set +# CONFIG_ARCH_BCM2835 is not set +# CONFIG_ARCH_BCM4908 is not set +# CONFIG_ARCH_BCM_IPROC is not set +# CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_BRCMSTB is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_K3 is not set +# CONFIG_ARCH_LAYERSCAPE is not set +# CONFIG_ARCH_LG1K is not set +# CONFIG_ARCH_HISI is not set +# CONFIG_ARCH_KEEMBAY is not set +# CONFIG_ARCH_MEDIATEK is not set +# CONFIG_ARCH_MESON is not set +# CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_ARCH_S32 is not set +# CONFIG_ARCH_SEATTLE is not set +# CONFIG_ARCH_INTEL_SOCFPGA is not set +# CONFIG_ARCH_SYNQUACER is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_TESLA_FSD is not set +# CONFIG_ARCH_SPRD is not set +# CONFIG_ARCH_THUNDER is not set +# CONFIG_ARCH_THUNDER2 is not set +# CONFIG_ARCH_UNIPHIER is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_VISCONTI is not set +# CONFIG_ARCH_XGENE is not set +# CONFIG_ARCH_ZYNQMP is not set +# CONFIG_PARAVIRT is not set +# CONFIG_KEXEC is not set +# CONFIG_KEXEC_FILE is not set +# CONFIG_XEN is not set +# CONFIG_ARM64_PTR_AUTH is not set +# CONFIG_ARM64_TLB_RANGE is not set +# CONFIG_ARM64_MTE is not set +CONFIG_PM_DEBUG=y +CONFIG_PM_TEST_SUSPEND=y +# CONFIG_HIBERNATION is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM is not set +# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set +CONFIG_ARM_IMX_CPUFREQ_DT=y +# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set +# CONFIG_ARM_QCOM_CPUFREQ_HW is not set +# CONFIG_ARM_RASPBERRYPI_CPUFREQ is not set +# CONFIG_ARM_SCMI_CPUFREQ is not set +# CONFIG_ARM_TEGRA186_CPUFREQ is not set +# CONFIG_ARM_MEDIATEK_CPUFREQ is not set +# CONFIG_QORIQ_CPUFREQ is not set +# CONFIG_ACPI_APEI_PCIEAER is not set +# CONFIG_VIRTUALIZATION is not set +# CONFIG_KVM is not set +# CONFIG_GCC_PLUGINS is not set +CONFIG_SECCOMP=y +CONFIG_IPV6=y +CONFIG_MODVERSIONS=y +CONFIG_IPV6_SIT=m +# CONFIG_NET_DSA_TAG_BRCM is not set +# CONFIG_NET_DSA_TAG_BRCM_LEGACY is not set +# CONFIG_NET_DSA_TAG_BRCM_PREPEND is not set +CONFIG_NET_DSA_TAG_OCELOT=m +# CONFIG_NET_DSA_TAG_OCELOT_8021Q is not set +CONFIG_VLAN_8021Q=y +CONFIG_LLC2=y +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_PKTGEN=m +CONFIG_BT=y +CONFIG_BT_LE=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y +# CONFIG_CAN_RCAR is not set +# CONFIG_CAN_RCAR_CANFD is not set +# CONFIG_CAN_MCP251XFD is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +CONFIG_BT_HCIUART_3WIRE=y +CONFIG_BT_HCIVHCI=y +CONFIG_CFG80211=y +CONFIG_NL80211_TESTMODE=y +CONFIG_CFG80211_WEXT=y +CONFIG_MAC80211=y +# CONFIG_BT_HCIUART_MRVL is not set +# CONFIG_BT_MRVL is not set +# CONFIG_BT_MRVL_SDIO is not set +# CONFIG_RFKILL is not set +# CONFIG_PCI is not set +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCIEAER is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCI_PASID is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HOTPLUG_PCI_ACPI is not set +# CONFIG_PCI_AARDVARK is not set +# CONFIG_PCI_TEGRA is not set +# CONFIG_PCIE_RCAR_HOST is not set +# CONFIG_PCIE_RCAR_EP is not set +# CONFIG_PCI_HOST_GENERIC is not set +# CONFIG_PCI_XGENE is not set +# CONFIG_PCIE_ALTERA is not set +# CONFIG_PCIE_ALTERA_MSI is not set +# CONFIG_PCI_HOST_THUNDER_PEM is not set +# CONFIG_PCI_HOST_THUNDER_ECAM is not set +# CONFIG_PCIE_ROCKCHIP_HOST is not set +# CONFIG_PCIE_BRCMSTB is not set +# CONFIG_PCI_IMX6 is not set +# CONFIG_PCI_LAYERSCAPE is not set +# CONFIG_PCI_HISI is not set +# CONFIG_PCIE_QCOM is not set +# CONFIG_PCIE_ARMADA_8K is not set +# CONFIG_PCIE_KIRIN is not set +# CONFIG_PCIE_HISI_STB is not set +# CONFIG_PCIE_TEGRA194_HOST is not set +# CONFIG_PCIE_VISCONTI_HOST is not set +# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set +# CONFIG_PCI_ENDPOINT is not set +# CONFIG_PCI_ENDPOINT_CONFIGFS is not set +# CONFIG_PCI_EPF_TEST is not set +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y +CONFIG_BRCMSTB_GISB_ARB=y +CONFIG_VEXPRESS_CONFIG=y +# CONFIG_HISILICON_LPC is not set +# CONFIG_TEGRA_ACONNECT is not set +# CONFIG_RASPBERRYPI_FIRMWARE is not set +# CONFIG_INTEL_STRATIX10_SERVICE is not set +# CONFIG_INTEL_STRATIX10_RSU is not set +CONFIG_IMX_DSP=y +# CONFIG_GNSS is not set +# CONFIG_GNSS_MTK_SERIAL is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_NAND_BRCMNAND is not set +CONFIG_MTD_NAND_GPMI_NAND=y +# CONFIG_MTD_NAND_MARVELL is not set +# CONFIG_MTD_NAND_FSL_IFC is not set +# CONFIG_MTD_NAND_QCOM is not set +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set +CONFIG_MTD_UBI=y +# CONFIG_OF_OVERLAY is not set +# CONFIG_BLK_DEV_NVME is not set +# CONFIG_PCI_ENDPOINT_TEST is not set +CONFIG_RAID_ATTRS=m +# CONFIG_SCSI_HISI_SAS_PCI is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT3SAS is not set +# CONFIG_SCSI_UFS_QCOM is not set +# CONFIG_SCSI_UFS_HISI is not set +# CONFIG_SCSI_UFS_EXYNOS is not set +# CONFIG_SATA_AHCI is not set +CONFIG_AHCI_IMX=y +# CONFIG_AHCI_BRCM is not set +# CONFIG_AHCI_MVEBU is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_RCAR is not set +CONFIG_DM_CRYPT=m +# CONFIG_B53 is not set +# CONFIG_NET_DSA_BCM_SF2 is not set +# CONFIG_NET_DSA_MSCC_FELIX is not set +# CONFIG_NET_XGENE is not set +# CONFIG_ATL1C is not set +# CONFIG_SYSTEMPORT is not set +# CONFIG_BNX2X is not set +# CONFIG_THUNDER_NIC_PF is not set +CONFIG_FSL_XGMAC_MDIO=y +CONFIG_FSL_ENETC_IERB=y +# CONFIG_FSL_FMAN is not set +# CONFIG_FSL_DPAA_ETH is not set +# CONFIG_FSL_DPAA2_ETH is not set +# CONFIG_FSL_ENETC is not set +# CONFIG_FSL_ENETC_VF is not set +# CONFIG_FSL_ENETC_QOS is not set +CONFIG_MVMDIO=y +CONFIG_MSCC_OCELOT_SWITCH=m +# CONFIG_HNS3 is not set +# CONFIG_HNS3_HCLGE is not set +# CONFIG_HNS3_ENET is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_MVNETA is not set +# CONFIG_MVPP2 is not set +# CONFIG_SKY2 is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX5_CORE is not set +# CONFIG_MLX5_CORE_EN is not set +# CONFIG_R8169 is not set +# CONFIG_SH_ETH is not set +# CONFIG_RAVB is not set +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_PLATFORM=y +CONFIG_DWMAC_GENERIC=m +CONFIG_DWMAC_IMX8=y +# CONFIG_BROADCOM_PHY is not set +CONFIG_MICROCHIP_PHY=y +CONFIG_NXP_TJA11XX_PHY=y +# CONFIG_SNI_AVE is not set +# CONFIG_SNI_NETSEC is not set +# CONFIG_TI_K3_AM65_CPSW_NUSS is not set +# CONFIG_QCOM_IPA is not set +# CONFIG_MESON_GXL_PHY is not set +# CONFIG_AQUANTIA_PHY is not set +# CONFIG_BCM54140_PHY is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_MARVELL_10G_PHY is not set +# CONFIG_MICREL_PHY is not set +# CONFIG_MICROSEMI_PHY is not set +# CONFIG_AT803X_PHY is not set +CONFIG_MDIO_BITBANG=y +# CONFIG_ROCKCHIP_PHY is not set +# CONFIG_DP83867_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_USB_BRCMSTB is not set +CONFIG_USB_RTL8152=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_AX88179_178A=y +CONFIG_USB_NET_CDC_NCM=y +CONFIG_USB_NET_NET1080=y +CONFIG_USB_NET_CDC_SUBSET=y +CONFIG_USB_NET_ZAURUS=y +CONFIG_BRCMFMAC=y +CONFIG_HOSTAP=y +CONFIG_RTL_CARDS=y +# CONFIG_ATH10K is not set +# CONFIG_ATH10K_PCI is not set +# CONFIG_ATH10K_SNOC is not set +# CONFIG_WCN36XX is not set +# CONFIG_MWIFIEX is not set +# CONFIG_MWIFIEX_SDIO is not set +# CONFIG_MWIFIEX_PCIE is not set +CONFIG_KEYBOARD_SNVS_PWRKEY=y +# CONFIG_KEYBOARD_IMX_SC_KEY is not set +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set +# CONFIG_INPUT_PM8941_PWRKEY is not set +# CONFIG_INPUT_PM8XXX_VIBRATOR is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_PWM_VIBRA is not set +# CONFIG_INPUT_HISI_POWERKEY is not set +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_8250_BCM2835AUX is not set +# CONFIG_SERIAL_8250_OMAP is not set +# CONFIG_SERIAL_8250_MT6577 is not set +# CONFIG_SERIAL_8250_UNIPHIER is not set +# CONFIG_SERIAL_MESON is not set +# CONFIG_SERIAL_MESON_CONSOLE is not set +# CONFIG_SERIAL_SAMSUNG is not set +# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set +# CONFIG_SERIAL_TEGRA is not set +# CONFIG_SERIAL_TEGRA_TCU is not set +# CONFIG_SERIAL_SH_SCI is not set +# CONFIG_SERIAL_MSM is not set +# CONFIG_SERIAL_MSM_CONSOLE is not set +# CONFIG_SERIAL_QCOM_GENI is not set +# CONFIG_SERIAL_QCOM_GENI_CONSOLE is not set +# CONFIG_SERIAL_MVEBU_UART is not set +# CONFIG_SERIAL_OWL is not set +# CONFIG_I2C_MUX is not set +# CONFIG_I2C_BCM2835 is not set +# CONFIG_I2C_MESON is not set +# CONFIG_I2C_MT65XX is not set +# CONFIG_I2C_MV64XXX is not set +# CONFIG_I2C_OMAP is not set +# CONFIG_I2C_OWL is not set +# CONFIG_I2C_PXA is not set +# CONFIG_I2C_QCOM_CCI is not set +# CONFIG_I2C_QCOM_GENI is not set +# CONFIG_I2C_QUP is not set +# CONFIG_I2C_RIIC is not set +# CONFIG_I2C_S3C2410 is not set +# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_TEGRA is not set +# CONFIG_I2C_UNIPHIER_F is not set +# CONFIG_I2C_RCAR is not set +# CONFIG_SPI_ARMADA_3700 is not set +# CONFIG_SPI_BCM2835 is not set +# CONFIG_SPI_BCM2835AUX is not set +# CONFIG_SPI_DESIGNWARE is not set +# CONFIG_SPI_DW_DMA is not set +# CONFIG_SPI_DW_MMIO is not set +CONFIG_SPI_IMX=y +# CONFIG_SPI_FSL_DSPI is not set +# CONFIG_SPI_MESON_SPICC is not set +# CONFIG_SPI_MESON_SPIFC is not set +# CONFIG_SPI_ORION is not set +CONFIG_SPI_SPIDEV=y +CONFIG_SPI_SLAVE=y +CONFIG_SPI_SLAVE_TIME=y +CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y +CONFIG_PINCTRL=y +# CONFIG_SPI_RPCIF is not set +# CONFIG_SPI_RSPI is not set +# CONFIG_SPI_QCOM_QSPI is not set +# CONFIG_SPI_QUP is not set +# CONFIG_SPI_QCOM_GENI is not set +# CONFIG_SPI_S3C64XX is not set +# CONFIG_SPI_SH_MSIOF is not set +# CONFIG_SPI_SUN6I is not set +# CONFIG_SPMI is not set +# CONFIG_PINCTRL_OWL is not set +# CONFIG_PINCTRL_S700 is not set +# CONFIG_PINCTRL_S900 is not set +CONFIG_GPIOLIB=y +# CONFIG_PINCTRL_MSM is not set +# CONFIG_PINCTRL_IPQ8074 is not set +# CONFIG_PINCTRL_IPQ6018 is not set +# CONFIG_PINCTRL_MSM8916 is not set +# CONFIG_PINCTRL_MSM8994 is not set +# CONFIG_PINCTRL_MSM8996 is not set +# CONFIG_PINCTRL_MSM8998 is not set +# CONFIG_PINCTRL_QCS404 is not set +# CONFIG_PINCTRL_QDF2XXX is not set +# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set +# CONFIG_PINCTRL_SC7180 is not set +# CONFIG_PINCTRL_SC7280 is not set +# CONFIG_PINCTRL_SDM845 is not set +# CONFIG_PINCTRL_SM8150 is not set +# CONFIG_PINCTRL_SM8250 is not set +# CONFIG_PINCTRL_SM8350 is not set +# CONFIG_PINCTRL_SM8450 is not set +# CONFIG_PINCTRL_LPASS_LPI is not set +# CONFIG_GPIO_DAVINCI is not set +# CONFIG_GPIO_MAX77620 is not set +# CONFIG_GPIO_MPC8XXX is not set +# CONFIG_GPIO_RCAR is not set +# CONFIG_GPIO_UNIPHIER is not set +# CONFIG_GPIO_VISCONTI is not set +# CONFIG_GPIO_XGENE_SB is not set +# CONFIG_GPIO_SL28CPLD is not set +CONFIG_POWER_RESET_BRCMSTB=y +# CONFIG_POWER_RESET_MSM is not set +# CONFIG_POWER_RESET_QCOM_PON is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_BQ25890 is not set +# CONFIG_CHARGER_BQ25980 is not set +# CONFIG_SENSORS_JC42 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set +# CONFIG_SENSORS_SL28CPLD is not set +CONFIG_THERMAL_WRITABLE_TRIPS=y +CONFIG_IMX_SC_THERMAL=y +CONFIG_IMX8MM_THERMAL=y +CONFIG_QORIQ_THERMAL=y +# CONFIG_SUN8I_THERMAL is not set +# CONFIG_ROCKCHIP_THERMAL is not set +# CONFIG_RCAR_THERMAL is not set +# CONFIG_RCAR_GEN3_THERMAL is not set +# CONFIG_RZG2L_THERMAL is not set +# CONFIG_ARMADA_THERMAL is not set +# CONFIG_BCM2711_THERMAL is not set +# CONFIG_BCM2835_THERMAL is not set +# CONFIG_BRCMSTB_THERMAL is not set +# CONFIG_EXYNOS_THERMAL is not set +# CONFIG_TEGRA_SOCTHERM is not set +# CONFIG_TEGRA_BPMP_THERMAL is not set +# CONFIG_QCOM_TSENS is not set +# CONFIG_QCOM_SPMI_TEMP_ALARM is not set +# CONFIG_QCOM_LMH is not set +# CONFIG_UNIPHIER_THERMAL is not set +# CONFIG_SL28CPLD_WATCHDOG is not set +# CONFIG_S3C2410_WATCHDOG is not set +# CONFIG_BCM7038_WDT is not set +# CONFIG_SUNXI_WATCHDOG is not set +CONFIG_IMX_SC_WDT=y +CONFIG_IMX7ULP_WDT=y +# CONFIG_QCOM_WDT is not set +# CONFIG_MESON_GXBB_WATCHDOG is not set +# CONFIG_MESON_WATCHDOG is not set +# CONFIG_RENESAS_WDT is not set +# CONFIG_RENESAS_RZG2LWDT is not set +# CONFIG_UNIPHIER_WATCHDOG is not set +# CONFIG_BCM2835_WDT is not set +# CONFIG_MFD_ALTERA_SYSMGR is not set +# CONFIG_MFD_AXP20X_RSB is not set +# CONFIG_MFD_EXYNOS_LPASS is not set +# CONFIG_MFD_HI655X_PMIC is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_SIMPLE_MFD_I2C is not set +# CONFIG_MFD_SPMI_PMIC is not set +# CONFIG_MFD_SL28CPLD is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_HI655X is not set +# CONFIG_REGULATOR_MP8859 is not set +# CONFIG_REGULATOR_MT6358 is not set +# CONFIG_REGULATOR_MT6397 is not set +# CONFIG_REGULATOR_PF8X00 is not set +# CONFIG_REGULATOR_QCOM_RPMH is not set +# CONFIG_REGULATOR_QCOM_SMD_RPM is not set +# CONFIG_REGULATOR_QCOM_SPMI is not set +# CONFIG_REGULATOR_TPS65132 is not set +CONFIG_MEDIA_SUPPORT=y +# CONFIG_RC_CORE is not set +# CONFIG_RC_DECODERS is not set +# CONFIG_RC_DEVICES is not set +# CONFIG_IR_MESON is not set +# CONFIG_IR_SUNXI is not set +CONFIG_SDR_PLATFORM_DRIVERS=y +# CONFIG_VIDEO_QCOM_CAMSS is not set +# CONFIG_VIDEO_RCAR_CSI2 is not set +# CONFIG_VIDEO_RCAR_VIN is not set +# CONFIG_VIDEO_SUN6I_CSI is not set +# CONFIG_VIDEO_RCAR_ISP is not set +# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set +# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set +# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set +# CONFIG_VIDEO_RENESAS_FDP1 is not set +# CONFIG_VIDEO_RENESAS_FCP is not set +# CONFIG_VIDEO_RENESAS_VSP1 is not set +# CONFIG_VIDEO_QCOM_VENUS is not set +# CONFIG_VIDEO_RCAR_DRIF is not set +CONFIG_VIDEO_OV5640=y +CONFIG_DRM=y +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +# CONFIG_DRM_NOUVEAU is not set +# CONFIG_DRM_EXYNOS is not set +# CONFIG_DRM_EXYNOS5433_DECON is not set +# CONFIG_DRM_EXYNOS7_DECON is not set +# CONFIG_DRM_EXYNOS_DSI is not set +# CONFIG_DRM_EXYNOS_DP is not set +# CONFIG_DRM_EXYNOS_HDMI is not set +# CONFIG_DRM_EXYNOS_MIC is not set +# CONFIG_DRM_ROCKCHIP is not set +# CONFIG_ROCKCHIP_ANALOGIX_DP is not set +# CONFIG_ROCKCHIP_CDN_DP is not set +# CONFIG_ROCKCHIP_DW_HDMI is not set +# CONFIG_ROCKCHIP_DW_MIPI_DSI is not set +# CONFIG_ROCKCHIP_INNO_HDMI is not set +# CONFIG_ROCKCHIP_LVDS is not set +# CONFIG_DRM_RCAR_DU is not set +# CONFIG_DRM_RCAR_USE_LVDS is not set +# CONFIG_DRM_RCAR_MIPI_DSI is not set +# CONFIG_DRM_SUN4I is not set +# CONFIG_DRM_SUN6I_DSI is not set +# CONFIG_DRM_SUN8I_DW_HDMI is not set +# CONFIG_DRM_SUN8I_MIXER is not set +# CONFIG_DRM_MSM is not set +# CONFIG_DRM_TEGRA is not set +# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set +# CONFIG_DRM_PANEL_LVDS is not set +# CONFIG_DRM_PANEL_SIMPLE is not set +# CONFIG_DRM_PANEL_EDP is not set +# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set +# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set +# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set +CONFIG_DRM_DISPLAY_CONNECTOR=m +# CONFIG_DRM_LONTIUM_LT8912B is not set +CONFIG_DRM_NWL_MIPI_DSI=y +# CONFIG_DRM_LONTIUM_LT9611UXC is not set +# CONFIG_DRM_PARADE_PS8640 is not set +CONFIG_DRM_I2C_ADV7511=y +CONFIG_DRM_DW_HDMI_I2S_AUDIO=m +CONFIG_DRM_IMX_DCSS=y +# CONFIG_DRM_VC4 is not set +# CONFIG_DRM_HISI_HIBMC is not set +CONFIG_DRM_MXSFB=y +# CONFIG_DRM_MEDIATEK is not set +# CONFIG_DRM_MEDIATEK_HDMI is not set +# CONFIG_DRM_MESON is not set +CONFIG_DRM_LEGACY=y +# CONFIG_FB is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_EFI is not set +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set +# CONFIG_BACKLIGHT_PWM is not set +# CONFIG_BACKLIGHT_LP855X is not set +# CONFIG_LOGO is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_ALOOP=m +# CONFIG_SND_HDA_TEGRA is not set +# CONFIG_SND_HDA_CODEC_HDMI is not set +CONFIG_SND_SOC_FSL_ASRC=y +# CONFIG_SND_SOC_FSL_AUDMIX is not set +# CONFIG_SND_SOC_FSL_SPDIF is not set +CONFIG_SND_SOC_FSL_EASRC=y +CONFIG_SND_IMX_SOC=y +CONFIG_SND_SOC_FSL_ASOC_CARD=y +CONFIG_SND_SOC_SOF_TOPLEVEL=y +CONFIG_SND_SOC_SOF_OF=m +CONFIG_SND_SOC_SOF_IMX_TOPLEVEL=y +CONFIG_SND_SOC_AK4458=y +CONFIG_SND_SOC_AK5558=y +CONFIG_SND_SOC_PCM512x_I2C=y +CONFIG_SND_SIMPLE_CARD=y +CONFIG_SND_AUDIO_GRAPH_CARD=y +CONFIG_USB_CONN_GPIO=y +# CONFIG_SND_BCM2835_SOC_I2S is not set +# CONFIG_SND_SOC_CROS_EC_CODEC is not set +# CONFIG_SND_SOC_DMIC is not set +# CONFIG_SND_SOC_FSL_MICFIL is not set +# CONFIG_SND_SOC_IMX_SGTL5000 is not set +# CONFIG_SND_SOC_IMX_SPDIF is not set +# CONFIG_SND_SOC_IMX_AUDMIX is not set +# CONFIG_SND_MESON_AXG_SOUND_CARD is not set +# CONFIG_SND_MESON_GX_SOUND_CARD is not set +# CONFIG_SND_SOC_QCOM is not set +# CONFIG_SND_SOC_APQ8016_SBC is not set +# CONFIG_SND_SOC_MSM8996 is not set +# CONFIG_SND_SOC_MAX98357A is not set +# CONFIG_SND_SOC_MAX98927 is not set +# CONFIG_SND_SOC_SDM845 is not set +# CONFIG_SND_SOC_SM8250 is not set +# CONFIG_SND_SOC_ROCKCHIP is not set +# CONFIG_SND_SOC_ROCKCHIP_SPDIF is not set +# CONFIG_SND_SOC_ROCKCHIP_RT5645 is not set +# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set +# CONFIG_SND_SOC_SAMSUNG is not set +# CONFIG_SND_SOC_RCAR is not set +# CONFIG_SND_SOC_RZ is not set +# CONFIG_SND_SOC_SGTL5000 is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SUN4I_I2S is not set +# CONFIG_SND_SUN4I_SPDIF is not set +# CONFIG_SND_SOC_TEGRA is not set +# CONFIG_SND_SOC_TEGRA210_AHUB is not set +# CONFIG_SND_SOC_TEGRA210_DMIC is not set +# CONFIG_SND_SOC_TEGRA210_I2S is not set +# CONFIG_SND_SOC_TEGRA186_DSPK is not set +# CONFIG_SND_SOC_TEGRA210_ADMAIF is not set +# CONFIG_SND_SOC_TEGRA210_MVC is not set +# CONFIG_SND_SOC_TEGRA210_SFC is not set +# CONFIG_SND_SOC_TEGRA210_AMX is not set +# CONFIG_SND_SOC_TEGRA210_ADX is not set +# CONFIG_SND_SOC_TEGRA210_MIXER is not set +# CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD is not set +# CONFIG_SND_SOC_AK4613 is not set +# CONFIG_SND_SOC_ES7134 is not set +# CONFIG_SND_SOC_ES7241 is not set +# CONFIG_SND_SOC_GTM601 is not set +# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set +# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set +# CONFIG_SND_SOC_PCM3168A_I2C is not set +# CONFIG_SND_SOC_RT5659 is not set +# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set +# CONFIG_SND_SOC_SIMPLE_MUX is not set +# CONFIG_SND_SOC_TAS571X is not set +# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set +# CONFIG_SND_SOC_WCD934X is not set +# CONFIG_SND_SOC_WM8904 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WSA881X is not set +# CONFIG_SND_SOC_NAU8822 is not set +# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set +# CONFIG_SND_SOC_LPASS_VA_MACRO is not set +# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set +# CONFIG_HID_MULTITOUCH is not set +# CONFIG_I2C_HID_ACPI is not set +# CONFIG_I2C_HID_OF is not set +# CONFIG_USB_XHCI_PCI_RENESAS is not set +# CONFIG_USB_XHCI_TEGRA is not set +# CONFIG_USB_EHCI_EXYNOS is not set +# CONFIG_USB_OHCI_EXYNOS is not set +CONFIG_USB_HCD_TEST_MODE=y +# CONFIG_USB_RENESAS_USBHS_HCD is not set +# CONFIG_USB_RENESAS_USBHS is not set +CONFIG_USB_UAS=y +# CONFIG_USB_CDNS_SUPPORT is not set +# CONFIG_USB_CDNS3 is not set +# CONFIG_USB_CDNS3_GADGET is not set +# CONFIG_USB_CDNS3_HOST is not set +# CONFIG_USB_MTU3 is not set +# CONFIG_USB_MUSB_SUNXI is not set +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_TEST=m +CONFIG_USB_EHSET_TEST_FIXTURE=y +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_MXS_PHY=y +# CONFIG_REALTEK_PHY is not set +CONFIG_USB_ULPI=y +CONFIG_USB_SNP_UDC_PLAT=y +CONFIG_USB_BDC_UDC=y +CONFIG_USB_CONFIGFS=y +# CONFIG_USB_RENESAS_USBHS_UDC is not set +# CONFIG_USB_RENESAS_USB3 is not set +# CONFIG_USB_TEGRA_XUDC is not set +CONFIG_USB_CONFIGFS_F_LB_SS=y +CONFIG_USB_CONFIGFS_F_UAC1=y +CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y +CONFIG_USB_CONFIGFS_F_UAC2=y +CONFIG_USB_CONFIGFS_F_MIDI=y +CONFIG_USB_CONFIGFS_F_HID=y +CONFIG_USB_CONFIGFS_F_UVC=y +CONFIG_USB_ZERO=m +CONFIG_USB_AUDIO=m +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_TYPEC=y +CONFIG_TYPEC_TCPM=y +CONFIG_TYPEC_TCPCI=y +# CONFIG_TYPEC_TPS6598X is not set +# CONFIG_MMC_SDHCI_ACPI is not set +# CONFIG_MMC_SDHCI_TEGRA is not set +# CONFIG_MMC_MESON_GX is not set +# CONFIG_MMC_SDHCI_MSM is not set +# CONFIG_MMC_SDHI is not set +# CONFIG_MMC_UNIPHIER is not set +# CONFIG_MMC_DW_ROCKCHIP is not set +# CONFIG_MMC_SUNXI is not set +# CONFIG_MMC_BCM2835 is not set +# CONFIG_MMC_MTK is not set +# CONFIG_MMC_OWL is not set +# CONFIG_LEDS_LM3692X is not set +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_EDAC_LAYERSCAPE is not set +# CONFIG_RTC_DRV_HYM8563 is not set +# CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_RV3028 is not set +# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set +# CONFIG_RTC_DRV_S3C is not set +CONFIG_RTC_DRV_SNVS=y +CONFIG_RTC_DRV_IMX_SC=y +# CONFIG_RTC_DRV_SUN6I is not set +# CONFIG_RTC_DRV_ARMADA38X is not set +# CONFIG_RTC_DRV_PM8XXX is not set +# CONFIG_RTC_DRV_TEGRA is not set +# CONFIG_RTC_DRV_XGENE is not set +# CONFIG_RTC_DRV_MT6397 is not set +CONFIG_BCM_SBA_RAID=m +# CONFIG_DMA_BCM2835 is not set +# CONFIG_DMA_SUN6I is not set +CONFIG_FSL_QDMA=m +CONFIG_IMX_SDMA=y +# CONFIG_K3_DMA is not set +# CONFIG_MV_XOR is not set +CONFIG_MXS_DMA=y +# CONFIG_OWL_DMA is not set +# CONFIG_TEGRA186_GPC_DMA is not set +# CONFIG_TEGRA20_APB_DMA is not set +# CONFIG_TEGRA210_ADMA is not set +# CONFIG_QCOM_BAM_DMA is not set +CONFIG_DMATEST=y +CONFIG_DMABUF_HEAPS=y +CONFIG_DMABUF_HEAPS_SYSTEM=y +CONFIG_DMABUF_HEAPS_CMA=y +# CONFIG_RCAR_DMAC is not set +# CONFIG_RENESAS_USB_DMAC is not set +# CONFIG_RZ_DMAC is not set +# CONFIG_TI_K3_UDMA is not set +# CONFIG_TI_K3_UDMA_GLUE_LAYER is not set +# CONFIG_VFIO_PCI is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_XEN_GNTDEV is not set +# CONFIG_XEN_GRANT_DEV_ALLOC is not set +# CONFIG_VIDEO_HANTRO is not set +# CONFIG_VIDEO_IMX_MEDIA is not set +CONFIG_CROS_EC_TYPEC=y +# CONFIG_CLK_VEXPRESS_OSC is not set +# CONFIG_COMMON_CLK_SCMI is not set +# CONFIG_COMMON_CLK_FSL_SAI is not set +CONFIG_COMMON_CLK_XGENE=y +# CONFIG_COMMON_CLK_BD718XX is not set +# CONFIG_CLK_RASPBERRYPI is not set +# CONFIG_CLK_IMX8MM is not set +# CONFIG_CLK_IMX8MP is not set +# CONFIG_CLK_IMX8MQ is not set +# CONFIG_CLK_IMX8QXP is not set +# CONFIG_CLK_IMX8ULP is not set +# CONFIG_TI_SCI_CLK is not set +# CONFIG_COMMON_CLK_QCOM is not set +# CONFIG_QCOM_A53PLL is not set +# CONFIG_QCOM_CLK_APCS_MSM8916 is not set +# CONFIG_QCOM_CLK_APCC_MSM8996 is not set +# CONFIG_QCOM_CLK_SMD_RPM is not set +# CONFIG_QCOM_CLK_RPMH is not set +# CONFIG_IPQ_GCC_6018 is not set +# CONFIG_IPQ_GCC_8074 is not set +# CONFIG_MSM_GCC_8916 is not set +# CONFIG_MSM_GCC_8994 is not set +# CONFIG_MSM_MMCC_8996 is not set +# CONFIG_MSM_GCC_8998 is not set +# CONFIG_QCS_GCC_404 is not set +# CONFIG_SC_GCC_7180 is not set +# CONFIG_SC_GCC_7280 is not set +# CONFIG_SDM_CAMCC_845 is not set +# CONFIG_SDM_GPUCC_845 is not set +# CONFIG_SDM_VIDEOCC_845 is not set +# CONFIG_SDM_DISPCC_845 is not set +# CONFIG_SM_GCC_8350 is not set +# CONFIG_SM_GCC_8450 is not set +# CONFIG_SM_GPUCC_8150 is not set +# CONFIG_SM_GPUCC_8250 is not set +# CONFIG_QCOM_HFPLL is not set +# CONFIG_CLK_GFM_LPASS_SM8250 is not set +# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set +# CONFIG_HWSPINLOCK_QCOM is not set +# CONFIG_RENESAS_OSTM is not set +# CONFIG_BCM2835_MBOX is not set +# CONFIG_QCOM_APCS_IPC is not set +# CONFIG_QCOM_IPCC is not set +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +# CONFIG_ROCKCHIP_IOMMU is not set +# CONFIG_TEGRA_IOMMU_SMMU is not set +# CONFIG_MTK_IOMMU is not set +# CONFIG_QCOM_IOMMU is not set +CONFIG_IMX_REMOTEPROC=y +CONFIG_IMX_DSP_REMOTEPROC=y +CONFIG_RPMSG_CHAR=y +# CONFIG_QCOM_Q6V5_MSS is not set +# CONFIG_QCOM_Q6V5_PAS is not set +# CONFIG_QCOM_SYSMON is not set +# CONFIG_QCOM_WCNSS_PIL is not set +# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set +# CONFIG_RPMSG_QCOM_SMD is not set +CONFIG_SOC_BRCMSTB=y +# CONFIG_OWL_PM_DOMAINS is not set +# CONFIG_RASPBERRYPI_POWER is not set +# CONFIG_FSL_DPAA is not set +# CONFIG_FSL_MC_DPIO is not set +CONFIG_SOC_TI=y +# CONFIG_DEVFREQ_GOV_USERSPACE is not set +# CONFIG_MTK_DEVAPC is not set +# CONFIG_MTK_PMIC_WRAP is not set +# CONFIG_QCOM_AOSS_QMP is not set +# CONFIG_QCOM_COMMAND_DB is not set +# CONFIG_QCOM_CPR is not set +# CONFIG_QCOM_GENI_SE is not set +# CONFIG_QCOM_RMTFS_MEM is not set +# CONFIG_QCOM_RPMH is not set +# CONFIG_QCOM_RPMHPD is not set +# CONFIG_QCOM_RPMPD is not set +# CONFIG_QCOM_SMEM is not set +# CONFIG_QCOM_SMD_RPM is not set +# CONFIG_QCOM_SMP2P is not set +# CONFIG_QCOM_SMSM is not set +# CONFIG_QCOM_SOCINFO is not set +# CONFIG_QCOM_STATS is not set +# CONFIG_QCOM_WCNSS_CTRL is not set +# CONFIG_QCOM_APR is not set +# CONFIG_ARCH_R8A77995 is not set +# CONFIG_ARCH_R8A77990 is not set +# CONFIG_ARCH_R8A77950 is not set +# CONFIG_ARCH_R8A77951 is not set +# CONFIG_ARCH_R8A77965 is not set +# CONFIG_ARCH_R8A77960 is not set +# CONFIG_ARCH_R8A77961 is not set +# CONFIG_ARCH_R8A779F0 is not set +# CONFIG_ARCH_R8A77980 is not set +# CONFIG_ARCH_R8A77970 is not set +# CONFIG_ARCH_R8A779A0 is not set +# CONFIG_ARCH_R8A774C0 is not set +# CONFIG_ARCH_R8A774E1 is not set +# CONFIG_ARCH_R8A774A1 is not set +# CONFIG_ARCH_R8A774B1 is not set +# CONFIG_ARCH_R9A07G044 is not set +# CONFIG_ROCKCHIP_IODOMAIN is not set +# CONFIG_ROCKCHIP_PM_DOMAINS is not set +# CONFIG_ARCH_TEGRA_132_SOC is not set +# CONFIG_ARCH_TEGRA_210_SOC is not set +# CONFIG_ARCH_TEGRA_186_SOC is not set +# CONFIG_ARCH_TEGRA_194_SOC is not set +# CONFIG_ARCH_TEGRA_234_SOC is not set +# CONFIG_TI_SCI_PM_DOMAINS is not set +# CONFIG_ARM_IMX_BUS_DEVFREQ is not set +# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set +CONFIG_MEMORY=y +# CONFIG_RENESAS_RPCIF is not set +CONFIG_IMX8QXP_ADC=y +# CONFIG_EXYNOS_ADC is not set +# CONFIG_QCOM_SPMI_VADC is not set +# CONFIG_QCOM_SPMI_ADC5 is not set +# CONFIG_ROCKCHIP_SARADC is not set +# CONFIG_RZG2L_ADC is not set +# CONFIG_TI_ADS1015 is not set +CONFIG_IIO_ST_LSM6DSX=y +# CONFIG_SENSORS_ISL29018 is not set +# CONFIG_VCNL4000 is not set +# CONFIG_IIO_ST_MAGN_3AXIS is not set +# CONFIG_MPL3115 is not set +# CONFIG_PWM_BCM2835 is not set +# CONFIG_PWM_BRCMSTB is not set +CONFIG_PWM_FSL_FTM=m +CONFIG_PWM_IMX27=y +# CONFIG_PWM_MESON is not set +# CONFIG_PWM_MTK_DISP is not set +# CONFIG_PWM_MEDIATEK is not set +# CONFIG_PWM_RCAR is not set +# CONFIG_PWM_RENESAS_TPU is not set +# CONFIG_PWM_ROCKCHIP is not set +# CONFIG_PWM_SAMSUNG is not set +# CONFIG_PWM_SL28CPLD is not set +# CONFIG_PWM_SUN4I is not set +# CONFIG_PWM_TEGRA is not set +# CONFIG_PWM_VISCONTI is not set +# CONFIG_SL28CPLD_INTC is not set +# CONFIG_QCOM_PDC is not set +# CONFIG_RESET_QCOM_AOSS is not set +# CONFIG_RESET_QCOM_PDC is not set +# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set +# CONFIG_RESET_TI_SCI is not set +CONFIG_PHY_CADENCE_SALVO=y +CONFIG_PHY_MIXEL_MIPI_DPHY=y +# CONFIG_PHY_SUN4I_USB is not set +# CONFIG_PHY_CADENCE_SIERRA is not set +# CONFIG_PHY_FSL_IMX8M_PCIE is not set +# CONFIG_PHY_HI6220_USB is not set +# CONFIG_PHY_HISTB_COMBPHY is not set +# CONFIG_PHY_HISI_INNO_USB2 is not set +# CONFIG_PHY_MVEBU_CP110_COMPHY is not set +# CONFIG_PHY_MTK_TPHY is not set +# CONFIG_PHY_QCOM_QMP is not set +# CONFIG_PHY_QCOM_QUSB2 is not set +CONFIG_PHY_SAMSUNG_USB2=y +# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set +# CONFIG_PHY_RCAR_GEN3_PCIE is not set +# CONFIG_PHY_RCAR_GEN3_USB2 is not set +# CONFIG_PHY_RCAR_GEN3_USB3 is not set +# CONFIG_PHY_ROCKCHIP_EMMC is not set +# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set +# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set +# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set +# CONFIG_PHY_ROCKCHIP_PCIE is not set +# CONFIG_PHY_ROCKCHIP_TYPEC is not set +# CONFIG_PHY_SAMSUNG_UFS is not set +# CONFIG_PHY_UNIPHIER_USB2 is not set +# CONFIG_PHY_UNIPHIER_USB3 is not set +# CONFIG_PHY_TEGRA_XUSB is not set +# CONFIG_PHY_AM654_SERDES is not set +# CONFIG_PHY_J721E_WIZ is not set +CONFIG_FSL_IMX8_DDR_PMU=y +# CONFIG_QCOM_L2_PMU is not set +# CONFIG_QCOM_L3_PMU is not set +# CONFIG_MTK_EFUSE is not set +# CONFIG_QCOM_QFPROM is not set +# CONFIG_ROCKCHIP_EFUSE is not set +# CONFIG_NVMEM_SUNXI_SID is not set +# CONFIG_UNIPHIER_EFUSE is not set +# CONFIG_MESON_EFUSE is not set +# CONFIG_NVMEM_RMEM is not set +# CONFIG_NVMEM_LAYERSCAPE_SFP is not set +# CONFIG_FPGA_MGR_ALTERA_CVP is not set +# CONFIG_FPGA_MGR_STRATIX10_SOC is not set +# CONFIG_SLIM_QCOM_NGD_CTRL is not set +# CONFIG_INTERCONNECT_IMX is not set +# CONFIG_INTERCONNECT_IMX8MM is not set +# CONFIG_INTERCONNECT_IMX8MN is not set +# CONFIG_INTERCONNECT_IMX8MQ is not set +# CONFIG_INTERCONNECT_QCOM is not set +# CONFIG_INTERCONNECT_QCOM_MSM8916 is not set +# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set +# CONFIG_INTERCONNECT_QCOM_SC7280 is not set +# CONFIG_INTERCONNECT_QCOM_SDM845 is not set +# CONFIG_INTERCONNECT_QCOM_SM8150 is not set +# CONFIG_INTERCONNECT_QCOM_SM8250 is not set +# CONFIG_INTERCONNECT_QCOM_SM8350 is not set +# CONFIG_INTERCONNECT_QCOM_SM8450 is not set +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TMPFS_XATTR is not set +CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_CRYPTO_USER=y +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_DH=m +# CONFIG_CRYPTO_CURVE25519 is not set +CONFIG_CRYPTO_CHACHA20POLY1305=m +CONFIG_CRYPTO_CFB=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_OFB=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_STREEBOG=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_AEAD=m +# CONFIG_CRYPTO_DEV_SUN8I_CE is not set +# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set +# CONFIG_CRYPTO_DEV_QCOM_RNG is not set +CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m +CONFIG_INDIRECT_PIO=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC8 is not set
board/bsh/imx8mn-bsh-smm-s2/linux.fragment line 931
Quoted 10 lines
board/bsh/imx8mn-bsh-smm-s2/linux.fragment new file +10
-0+# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set +# CONFIG_CRYPTO_DEV_HISI_ZIP is not set +# CONFIG_CRYPTO_DEV_HISI_HPRE is not set +# CONFIG_CRYPTO_DEV_HISI_TRNG is not set +CONFIG_IRQ_POLL=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_INFO_REDUCED is not set +CONFIG_CORESIGHT=y +CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y +CONFIG_CORESIGHT_SOURCE_ETM4X=y
This fragment ^^^ must be shrinked with:
$ make savedefconfig This way it should reduce a lot.
Quoted 51 lines
board/bsh/imx8mn-bsh-smm-s2/nand-full.lst new file +29
-0@@ -0,0 +1,29 @@ +# @_flash.bin | bootloader +# @_image [_flash.bin] | image burn to nand, default is the same as bootloader +# @_filesystem | filesystem to burn +# @_kernel | kernel image +# @_dtb | dtb image + +# This command will be run when ROM support stream mode +# i.MX8QXP, i.MX8QM +SDPS: boot -f _flash.bin + +FB: ucmd setenv fastboot_buffer ${loadaddr} +FB: download -f _image +# Burn image to nandfit partition if needed +FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi; +FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize} + +FB[-t 10000]: ucmd ubi part nandrootfs +FB[-t 10000]: ucmd ubi create root - +FB: download -f _filesystem +FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize} + +FB: download -f _kernel +FB[-t 10000]: ucmd nand write ${loadaddr} nandkernel ${filesize} + +FB: download -f _dtb +FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize} + +FB: reboot +FB: doneboard/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch new file +10
-0@@ -0,0 +1,64 @@ +From fd270493d83fa97568f605552656f48c932d1237 Mon Sep 17 00:00:00 2001 +From: Dario Binacchi <[email protected]> +Date: Sun, 22 May 2022 17:40:15 +0200 +Subject: [PATCH 1/2] dmaengine: mxs: use platform_driver_register + +Driver registration fails on SOC imx8mn as its supplier, the clock +control module, is probed later than subsys initcall level. This driver +uses platform_driver_probe which is not compatible with deferred probing +and won't be probed again later if probe function fails due to clock not +being available at that time.
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch line 20
Quoted 10 lines
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch new file +10
-0+ +This patch replaces the use of platform_driver_probe with +platform_driver_register which will allow probing the driver later again +when the clock control module will be available. + +Fixes: a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28") +Co-developed-by: Michael Trimarchi <[email protected]> +Signed-off-by: Michael Trimarchi <[email protected]> +Signed-off-by: Dario Binacchi <[email protected]> +Cc: [email protected]
Can you please indicate the upstream URL of the pending patch? For example a Patchwork link?
Also, here you should add 3 dashes to avoid having the version history to fall into the final commit log.
Quoted 55 lines
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch new file +44
-0+ +Series-version: 5 + +Series-changes: 5 +- Update the commit message. +- Create a new patch to remove the warning generated by this patch. + +Series-changes: 4 +- Restore __init in front of mxs_dma_probe() definition. +- Rename the mxs_dma_driver variable to mxs_dma_driver_probe. +- Update the commit message. +- Use builtin_platform_driver() instead of module_platform_driver(). + +Series-changes: 3 +- Restore __init in front of mxs_dma_init() definition. + +Series-changes: 2 +- Add the tag "Cc: [email protected]" in the sign-off area. + +Series-cc: [email protected] +--- + drivers/dma/mxs-dma.c | 8 ++------ + 1 file changed, 2 insertions(+), 6 deletions(-) + +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c +index 994fc4d2aca4..18f8154b859b 100644 +--- a/drivers/dma/mxs-dma.c ++++ b/drivers/dma/mxs-dma.c +@@ -839,10 +839,6 @@ static struct platform_driver mxs_dma_driver = { + .name = "mxs-dma", + .of_match_table = mxs_dma_dt_ids, + }, ++ .probe = mxs_dma_probe, + }; +- +-static int __init mxs_dma_module_init(void) +-{ +- return platform_driver_probe(&mxs_dma_driver, mxs_dma_probe); +-} +-subsys_initcall(mxs_dma_module_init); ++builtin_platform_driver(mxs_dma_driver); +-- +2.32.0 +board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch new file +5
-0@@ -0,0 +1,35 @@ +From 145ee0b2e192da90348f1c77ea9c69ba7001159c Mon Sep 17 00:00:00 2001 +From: Dario Binacchi <[email protected]> +Date: Tue, 12 Jul 2022 15:15:19 +0200 +Subject: [PATCH 2/2] dmaengine: mxs: fix section mismatch +
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch line 15
Quoted 10 lines
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch new file +10
-0+The patch was suggested by the following modpost warning: + +WARNING: modpost: vmlinux.o(.data+0xa3900): Section mismatch in reference from the variable mxs_dma_driver to the function .init.text:mxs_dma_probe() +The variable mxs_dma_driver references +the function __init mxs_dma_probe() +If the reference is valid then annotate the +variable with __init* or __refdata (see linux/init.h) or name the variable: +*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console + +Signed-off-by: Dario Binacchi <[email protected]>
Same here as above
Quoted 34 lines
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch new file +20
-0+--- + drivers/dma/mxs-dma.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c +index 18f8154b859b..a01953e06048 100644 +--- a/drivers/dma/mxs-dma.c ++++ b/drivers/dma/mxs-dma.c +@@ -834,7 +834,7 @@ static int __init mxs_dma_probe(struct platform_device *pdev) + return 0; + } + +-static struct platform_driver mxs_dma_driver = { ++static struct platform_driver mxs_dma_driver __initdata = { + .driver = { + .name = "mxs-dma", + .of_match_table = mxs_dma_dt_ids, +-- +2.32.0 +board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch new file +8
-0@@ -0,0 +1,159 @@ +From d818bfb185a9f62fc988141d2dbbf9e9bc8ffa5d Mon Sep 17 00:00:00 2001 +From: Michael Trimarchi <[email protected]> +Date: Sun, 22 May 2022 15:22:08 +0200 +Subject: [PATCH 06/10] include/configs: Remove rootwait=1 to all the affected + boards + +rootwait=1 is not a valid kernel boot parameters. According +to the documenation is only rootwait
board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch line 18
Quoted 10 lines
board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch new file +10
-0+ +rootwait [KNL] Wait (indefinitely) for root device to show up. + Useful for devices that are detected asynchronously + (e.g. USB and MMC devices). + +Fix: +Unknown kernel command line parameters "rootwait=1", will be passed to user space. + +Signed-off-by: Michael Trimarchi <[email protected]> +Reviewed-by: Heiko Schocher <[email protected]>
Ditto
Quoted 238 lines
board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch new file +141
-0+--- + include/configs/am335x_evm.h | 2 +- + include/configs/am43xx_evm.h | 2 +- + include/configs/baltos.h | 2 +- + include/configs/chiliboard.h | 2 +- + include/configs/etamin.h | 2 +- + include/configs/imx8mn_bsh_smm_s2.h | 2 +- + include/configs/siemens-am33x-common.h | 4 ++-- + include/configs/ti_armv7_keystone2.h | 2 +- + include/environment/ti/nand.h | 2 +- + 9 files changed, 10 insertions(+), 10 deletions(-) + +diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h +index fd5b209a52db..f301a6dc835b 100644 +--- a/include/configs/am335x_evm.h ++++ b/include/configs/am335x_evm.h +@@ -34,7 +34,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ +diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h +index 5057441f7506..1f5c3cd04e88 100644 +--- a/include/configs/am43xx_evm.h ++++ b/include/configs/am43xx_evm.h +@@ -166,7 +166,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ +diff --git a/include/configs/baltos.h b/include/configs/baltos.h +index b881d8c03fd7..7b43741fde7c 100644 +--- a/include/configs/baltos.h ++++ b/include/configs/baltos.h +@@ -37,7 +37,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=5\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "setenv loadaddr 0x84000000; " \ +diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h +index 82acda595f09..8bad0f9ac4b6 100644 +--- a/include/configs/chiliboard.h ++++ b/include/configs/chiliboard.h +@@ -20,7 +20,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdt_addr} NAND.u-boot-spl-os; " \ +diff --git a/include/configs/etamin.h b/include/configs/etamin.h +index dc83ab71908b..3548382d2036 100644 +--- a/include/configs/etamin.h ++++ b/include/configs/etamin.h +@@ -113,7 +113,7 @@ + "nand_active_ubi_vol=rootfs_a\0" \ + "rootfs_name=rootfs\0" \ + "kernel_name=uImage\0"\ +- "nand_root_fs_type=ubifs rootwait=1\0" \ ++ "nand_root_fs_type=ubifs rootwait\0" \ + "nand_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv ${partitionset_active} true;" \ +diff --git a/include/configs/imx8mn_bsh_smm_s2.h b/include/configs/imx8mn_bsh_smm_s2.h +index 098f23b206d1..f7529783692e 100644 +--- a/include/configs/imx8mn_bsh_smm_s2.h ++++ b/include/configs/imx8mn_bsh_smm_s2.h +@@ -21,7 +21,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:root rw ubi.mtd=nandrootfs\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdt_addr_r} nanddtb; " \ +diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h +index 08c4d52d658f..9f1a6cd51b40 100644 +--- a/include/configs/siemens-am33x-common.h ++++ b/include/configs/siemens-am33x-common.h +@@ -237,7 +237,7 @@ + "nand_active_ubi_vol=rootfs_a\0" \ + "nand_active_ubi_vol_A=rootfs_a\0" \ + "nand_active_ubi_vol_B=rootfs_b\0" \ +- "nand_root_fs_type=ubifs rootwait=1\0" \ ++ "nand_root_fs_type=ubifs rootwait\0" \ + "nand_src_addr=0x280000\0" \ + "nand_src_addr_A=0x280000\0" \ + "nand_src_addr_B=0x780000\0" \ +@@ -314,7 +314,7 @@ + "nand_active_ubi_vol=rootfs_a\0" \ + "rootfs_name=rootfs\0" \ + "kernel_name=uImage\0"\ +- "nand_root_fs_type=ubifs rootwait=1\0" \ ++ "nand_root_fs_type=ubifs rootwait\0" \ + "nand_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv ${partitionset_active} true;" \ +diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h +index 57f013cbf846..133daecf7164 100644 +--- a/include/configs/ti_armv7_keystone2.h ++++ b/include/configs/ti_armv7_keystone2.h +@@ -180,7 +180,7 @@ + "sf write ${loadaddr} 0 ${filesize}\0" \ + "burn_uboot_nand=nand erase 0 0x100000; " \ + "nand write ${loadaddr} 0 ${filesize}\0" \ +- "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 " \ ++ "args_all=setenv bootargs console=ttyS0,115200n8 rootwait " \ + KERNEL_MTD_PARTS \ + "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \ + "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ +diff --git a/include/environment/ti/nand.h b/include/environment/ti/nand.h +index 11dcefcc41ca..7d00afa2b10f 100644 +--- a/include/environment/ti/nand.h ++++ b/include/environment/ti/nand.h +@@ -14,7 +14,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ +-- +2.32.0 +board/bsh/imx8mn-bsh-smm-s2/post-build.sh new file +4
-0@@ -0,0 +1,4 @@ +#!/bin/sh +BOARD_DIR="$(dirname $0)" + +cp ${BOARD_DIR}/nand-full.lst ${BINARIES_DIR}board/bsh/imx8mn-bsh-smm-s2/readme.txt new file +75
-0@@ -0,0 +1,75 @@ +i.MX8MN BSH SMM S2 +================== + +This tutorial describes how to use the predefined Buildroot +configuration for the i.MX8MN BSH SMM S2 PRO board. + +Building +-------- + +Configure buildroot: + + $ make imx8mn_bsh_smm_s2_defconfig + +Change settings to fit your needs (optional): + + $ make menuconfig + +Compile everything and build the rootfs image: + + $ make + + +Result of the build +------------------- + +After building, the output/images directory contains: + + output/images/ + ├── bl31.bin + ├── ddr3* + ├── flash.bin + ├── freescale/imx8mn-bsh-smm-s2.dtb + ├── Image + ├── nand-full.lst + ├── rootfs.ext2 + ├── rootfs.ext4 -> rootfs.ext2 + ├── rootfs.tar + ├── rootfs.ubifs + ├── u-boot.bin + └── u-boot-spl.bin + + +Preparing the board +------------------- + +Plug the USB type A to micro B cable into the USB Debug +Connector (DBG UART). Use serial port settings 115200 8N1 +to access the debug console. + +Plug another USB type A to micro B cable into the USB-OTG +Connector (USB1). This connection is used to flash the board +firmware using the Freescale/NXP UUU tool. + +Connect the power supply/adaptor to the DC Power Jack (labelled ++5V). + + +Flashing +-------- + +Power up the board by switching on the Power ON Switch, which is +placed right next to the DC Jack. + +Enter the following U-Boot commands on the debug serial console: + + $ nand erase.chip + $ reset + +Flash the built images directly to board’s memory. On your computer, +run: + + $ board/bsh/imx8mn-bsh-smm-s2/flash.sh output/ + +It will flash the bootloader, the Device Tree Blob, the kernel image +and the UBI root file system.configs/imx8mn_bsh_smm_s2_defconfig new file +0
-0
configs/imx8mn_bsh_smm_s2_defconfig line 7
Quoted 7 lines
configs/imx8mn_bsh_smm_s2_defconfig new file +7
-0@@ -0,0 +1,40 @@ +BR2_aarch64=y +BR2_GLOBAL_PATCH_DIR="board/bsh/imx8mn-bsh-smm-s2/patches" +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2/post-build.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18"
Here ^^^ it would be better using the latest stable version of 5.18, at the moment it's 5.18.15, so testing again the resulting image with this Linux version.
Quoted 23 lines
configs/imx8mn_bsh_smm_s2_defconfig new file +23
-0+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2" +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_PACKAGE_FIRMWARE_IMX_DDR3=y +BR2_TARGET_ROOTFS_UBIFS=y +BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000 +BR2_TARGET_ROOTFS_UBIFS_RT_NONE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07"
configs/imx8mn_bsh_smm_s2_defconfig line 40
Quoted 10 lines
configs/imx8mn_bsh_smm_s2_defconfig new file +10
-0+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin" +BR2_TARGET_UBOOT_SPL=y +BR2_PACKAGE_HOST_UUU=y
I've built successfully this defconfig using Buildroot's utils/docker-run so all host dependencies are met.
I don't have the board but I've tried anyway to call:board/bsh/imx8mn-bsh-smm-s2/flash.sh output
and of course it fails because there is not the board connected, but the error message is as follows:
"
terminate called after throwing an instance of 'std::runtime_error'
what(): Call libusb_init failureboard/bsh/imx8mn-bsh-smm-s2/flash.sh: line 25: 434921 Aborted
(core dumped)
"
it seems something related to uuu package that doesn't deal with errors that well. It's acceptable but it could be good to improve uuu package to deal with that error in a more elegant way if you can.
Waiting for V4.
Thank you All!
Best regards
Signature · 6 lines
Giulio Benetti Benetti Engineering sas _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v3 1/2] configs/imx8mn_bsh_smm_s2_defconfig: new defconfig
Hi Giulio,
Sorry for the late reply
Quoted 10 lines · Giulio Benetti
Hi Dario, Michael, Ariel, All,
Quoted 4 lines · Dario Binacchi
BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide input and output interfaces to a dedicated carrier board. It is designed mainly to provide graphical/video and connectivity interfaces to the appliance.
Can you please provide an URL to the product here in commit log?
I can add the link for the BSH smm-s2-pro board, the board is basically the same except it boots from NAND instead of eMMC.
Quoted 1,048 lines
Quoted 1,036 lines
Board support package includes the following components:
- mainline Linux kernel 5.18
- mainline U-Boot 2022-07
- default packages from buildrootPatches applied to the Linux kernel and U-Boot have been submitted but not merged yet.
Co-authored-by Michael Trimarchi <[email protected]>Signed-off-by Michael Trimarchi <[email protected]>Signed-off-by Dario Binacchi <[email protected]>---
Changes in v3:
- Update the commit description.
- Bump U-Boot to version 2022-07.
- Remove U-Boot patches merged in version 2022-07.
- Update the Linux patches.Changes in v2:
- Change commit subject and description.
- Update linux patch to version 4. It hasn't been merged yet but has been reviewed. This is the most up-to-date version.
- ReplaceCo-developed-by:' tag withCo-authored-by'.
- Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and a config fragment for the changes.
- Remove useless and deprecated statements in nand-full.lst.
- Remove the buildroot configurations for ext2/ext4 filesystem creation.Signed-off-by Dario Binacchi <[email protected]>--- DEVELOPERS | 4 + board/bsh/imx8mn-bsh-smm-s2/flash.sh | 26 + board/bsh/imx8mn-bsh-smm-s2/linux.fragment | 931 ++++++++++++++++++ board/bsh/imx8mn-bsh-smm-s2/nand-full.lst | 29 + ...ine-mxs-use-platform_driver_register.patch | 64 ++ ...2-dmaengine-mxs-fix-section-mismatch.patch | 35 + ...Remove-rootwait-1-to-all-the-affecte.patch | 159 +++ board/bsh/imx8mn-bsh-smm-s2/post-build.sh | 4 + board/bsh/imx8mn-bsh-smm-s2/readme.txt | 75 ++ configs/imx8mn_bsh_smm_s2_defconfig | 40 + 10 files changed, 1367 insertions(+)create mode 100755
board/bsh/imx8mn-bsh-smm-s2/flash.sh
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/linux.fragment
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
create mode 100644board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patchcreate mode 100644board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patchcreate mode 100644board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patchcreate mode 100755board/bsh/imx8mn-bsh-smm-s2/post-build.sh
create mode 100644board/bsh/imx8mn-bsh-smm-s2/readme.txt
create mode 100644 configs/imx8mn_bsh_smm_s2_defconfigDEVELOPERS +4
-0@@ -657,6 +657,8 @@ F: package/luaexpat/ F: package/xinetd/ N: Dario Binacchi <[email protected]> +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_defconfig F: package/uuu/ N: Dario Binacchi <[email protected]>@@ -2045,6 +2047,8 @@ F: package/python-crc16/ F: package/python-pyzmq/ N: Michael Trimarchi <[email protected]> +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_defconfig F: package/python-spidev/ N: Michael Vetter <[email protected]>board/bsh/imx8mn-bsh-smm-s2/flash.sh new file +26
-0@@ -0,0 +1,26 @@ +#!/bin/bash + +if [ $# -eq 0 ]; then + OUTPUT_DIR=output +else + OUTPUT_DIR=$1 +fi + +if ! test -d "${OUTPUT_DIR}" ; then + echo "ERROR: no output directory specified." + echo "Usage: $0 OUTPUT_DIR" + echo "" + echo "Arguments:" + echo " OUTPUT_DIR The Buildroot output directory." + exit 1 +fi + +IMAGES_DIR=${OUTPUT_DIR}/images + +${OUTPUT_DIR}/host/bin/uuu -v -b ${IMAGES_DIR}/nand-full.lst \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/rootfs.ubifs \ + ${IMAGES_DIR}/Image \ + ${IMAGES_DIR}/freescale/imx8mn-bsh-smm-s2.dtb +board/bsh/imx8mn-bsh-smm-s2/linux.fragment new file +921
-0@@ -0,0 +1,931 @@ +# CONFIG_BPF_SYSCALL is not set +# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set +CONFIG_TASK_DELAY_ACCT=y +CONFIG_CGROUP_FREEZER=y +# CONFIG_CGROUP_BPF is not set +CONFIG_RELAY=y +# CONFIG_ARCH_ACTIONS is not set +# CONFIG_ARCH_SUNXI is not set +# CONFIG_ARCH_ALPINE is not set +# CONFIG_ARCH_APPLE is not set +# CONFIG_ARCH_BCM2835 is not set +# CONFIG_ARCH_BCM4908 is not set +# CONFIG_ARCH_BCM_IPROC is not set +# CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_BRCMSTB is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_K3 is not set +# CONFIG_ARCH_LAYERSCAPE is not set +# CONFIG_ARCH_LG1K is not set +# CONFIG_ARCH_HISI is not set +# CONFIG_ARCH_KEEMBAY is not set +# CONFIG_ARCH_MEDIATEK is not set +# CONFIG_ARCH_MESON is not set +# CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_ARCH_S32 is not set +# CONFIG_ARCH_SEATTLE is not set +# CONFIG_ARCH_INTEL_SOCFPGA is not set +# CONFIG_ARCH_SYNQUACER is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_TESLA_FSD is not set +# CONFIG_ARCH_SPRD is not set +# CONFIG_ARCH_THUNDER is not set +# CONFIG_ARCH_THUNDER2 is not set +# CONFIG_ARCH_UNIPHIER is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_VISCONTI is not set +# CONFIG_ARCH_XGENE is not set +# CONFIG_ARCH_ZYNQMP is not set +# CONFIG_PARAVIRT is not set +# CONFIG_KEXEC is not set +# CONFIG_KEXEC_FILE is not set +# CONFIG_XEN is not set +# CONFIG_ARM64_PTR_AUTH is not set +# CONFIG_ARM64_TLB_RANGE is not set +# CONFIG_ARM64_MTE is not set +CONFIG_PM_DEBUG=y +CONFIG_PM_TEST_SUSPEND=y +# CONFIG_HIBERNATION is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM is not set +# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set +CONFIG_ARM_IMX_CPUFREQ_DT=y +# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set +# CONFIG_ARM_QCOM_CPUFREQ_HW is not set +# CONFIG_ARM_RASPBERRYPI_CPUFREQ is not set +# CONFIG_ARM_SCMI_CPUFREQ is not set +# CONFIG_ARM_TEGRA186_CPUFREQ is not set +# CONFIG_ARM_MEDIATEK_CPUFREQ is not set +# CONFIG_QORIQ_CPUFREQ is not set +# CONFIG_ACPI_APEI_PCIEAER is not set +# CONFIG_VIRTUALIZATION is not set +# CONFIG_KVM is not set +# CONFIG_GCC_PLUGINS is not set +CONFIG_SECCOMP=y +CONFIG_IPV6=y +CONFIG_MODVERSIONS=y +CONFIG_IPV6_SIT=m +# CONFIG_NET_DSA_TAG_BRCM is not set +# CONFIG_NET_DSA_TAG_BRCM_LEGACY is not set +# CONFIG_NET_DSA_TAG_BRCM_PREPEND is not set +CONFIG_NET_DSA_TAG_OCELOT=m +# CONFIG_NET_DSA_TAG_OCELOT_8021Q is not set +CONFIG_VLAN_8021Q=y +CONFIG_LLC2=y +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_PKTGEN=m +CONFIG_BT=y +CONFIG_BT_LE=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y +# CONFIG_CAN_RCAR is not set +# CONFIG_CAN_RCAR_CANFD is not set +# CONFIG_CAN_MCP251XFD is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +CONFIG_BT_HCIUART_3WIRE=y +CONFIG_BT_HCIVHCI=y +CONFIG_CFG80211=y +CONFIG_NL80211_TESTMODE=y +CONFIG_CFG80211_WEXT=y +CONFIG_MAC80211=y +# CONFIG_BT_HCIUART_MRVL is not set +# CONFIG_BT_MRVL is not set +# CONFIG_BT_MRVL_SDIO is not set +# CONFIG_RFKILL is not set +# CONFIG_PCI is not set +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCIEAER is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCI_PASID is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HOTPLUG_PCI_ACPI is not set +# CONFIG_PCI_AARDVARK is not set +# CONFIG_PCI_TEGRA is not set +# CONFIG_PCIE_RCAR_HOST is not set +# CONFIG_PCIE_RCAR_EP is not set +# CONFIG_PCI_HOST_GENERIC is not set +# CONFIG_PCI_XGENE is not set +# CONFIG_PCIE_ALTERA is not set +# CONFIG_PCIE_ALTERA_MSI is not set +# CONFIG_PCI_HOST_THUNDER_PEM is not set +# CONFIG_PCI_HOST_THUNDER_ECAM is not set +# CONFIG_PCIE_ROCKCHIP_HOST is not set +# CONFIG_PCIE_BRCMSTB is not set +# CONFIG_PCI_IMX6 is not set +# CONFIG_PCI_LAYERSCAPE is not set +# CONFIG_PCI_HISI is not set +# CONFIG_PCIE_QCOM is not set +# CONFIG_PCIE_ARMADA_8K is not set +# CONFIG_PCIE_KIRIN is not set +# CONFIG_PCIE_HISI_STB is not set +# CONFIG_PCIE_TEGRA194_HOST is not set +# CONFIG_PCIE_VISCONTI_HOST is not set +# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set +# CONFIG_PCI_ENDPOINT is not set +# CONFIG_PCI_ENDPOINT_CONFIGFS is not set +# CONFIG_PCI_EPF_TEST is not set +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y +CONFIG_BRCMSTB_GISB_ARB=y +CONFIG_VEXPRESS_CONFIG=y +# CONFIG_HISILICON_LPC is not set +# CONFIG_TEGRA_ACONNECT is not set +# CONFIG_RASPBERRYPI_FIRMWARE is not set +# CONFIG_INTEL_STRATIX10_SERVICE is not set +# CONFIG_INTEL_STRATIX10_RSU is not set +CONFIG_IMX_DSP=y +# CONFIG_GNSS is not set +# CONFIG_GNSS_MTK_SERIAL is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_NAND_BRCMNAND is not set +CONFIG_MTD_NAND_GPMI_NAND=y +# CONFIG_MTD_NAND_MARVELL is not set +# CONFIG_MTD_NAND_FSL_IFC is not set +# CONFIG_MTD_NAND_QCOM is not set +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set +CONFIG_MTD_UBI=y +# CONFIG_OF_OVERLAY is not set +# CONFIG_BLK_DEV_NVME is not set +# CONFIG_PCI_ENDPOINT_TEST is not set +CONFIG_RAID_ATTRS=m +# CONFIG_SCSI_HISI_SAS_PCI is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT3SAS is not set +# CONFIG_SCSI_UFS_QCOM is not set +# CONFIG_SCSI_UFS_HISI is not set +# CONFIG_SCSI_UFS_EXYNOS is not set +# CONFIG_SATA_AHCI is not set +CONFIG_AHCI_IMX=y +# CONFIG_AHCI_BRCM is not set +# CONFIG_AHCI_MVEBU is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_RCAR is not set +CONFIG_DM_CRYPT=m +# CONFIG_B53 is not set +# CONFIG_NET_DSA_BCM_SF2 is not set +# CONFIG_NET_DSA_MSCC_FELIX is not set +# CONFIG_NET_XGENE is not set +# CONFIG_ATL1C is not set +# CONFIG_SYSTEMPORT is not set +# CONFIG_BNX2X is not set +# CONFIG_THUNDER_NIC_PF is not set +CONFIG_FSL_XGMAC_MDIO=y +CONFIG_FSL_ENETC_IERB=y +# CONFIG_FSL_FMAN is not set +# CONFIG_FSL_DPAA_ETH is not set +# CONFIG_FSL_DPAA2_ETH is not set +# CONFIG_FSL_ENETC is not set +# CONFIG_FSL_ENETC_VF is not set +# CONFIG_FSL_ENETC_QOS is not set +CONFIG_MVMDIO=y +CONFIG_MSCC_OCELOT_SWITCH=m +# CONFIG_HNS3 is not set +# CONFIG_HNS3_HCLGE is not set +# CONFIG_HNS3_ENET is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_MVNETA is not set +# CONFIG_MVPP2 is not set +# CONFIG_SKY2 is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX5_CORE is not set +# CONFIG_MLX5_CORE_EN is not set +# CONFIG_R8169 is not set +# CONFIG_SH_ETH is not set +# CONFIG_RAVB is not set +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_PLATFORM=y +CONFIG_DWMAC_GENERIC=m +CONFIG_DWMAC_IMX8=y +# CONFIG_BROADCOM_PHY is not set +CONFIG_MICROCHIP_PHY=y +CONFIG_NXP_TJA11XX_PHY=y +# CONFIG_SNI_AVE is not set +# CONFIG_SNI_NETSEC is not set +# CONFIG_TI_K3_AM65_CPSW_NUSS is not set +# CONFIG_QCOM_IPA is not set +# CONFIG_MESON_GXL_PHY is not set +# CONFIG_AQUANTIA_PHY is not set +# CONFIG_BCM54140_PHY is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_MARVELL_10G_PHY is not set +# CONFIG_MICREL_PHY is not set +# CONFIG_MICROSEMI_PHY is not set +# CONFIG_AT803X_PHY is not set +CONFIG_MDIO_BITBANG=y +# CONFIG_ROCKCHIP_PHY is not set +# CONFIG_DP83867_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_USB_BRCMSTB is not set +CONFIG_USB_RTL8152=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_AX88179_178A=y +CONFIG_USB_NET_CDC_NCM=y +CONFIG_USB_NET_NET1080=y +CONFIG_USB_NET_CDC_SUBSET=y +CONFIG_USB_NET_ZAURUS=y +CONFIG_BRCMFMAC=y +CONFIG_HOSTAP=y +CONFIG_RTL_CARDS=y +# CONFIG_ATH10K is not set +# CONFIG_ATH10K_PCI is not set +# CONFIG_ATH10K_SNOC is not set +# CONFIG_WCN36XX is not set +# CONFIG_MWIFIEX is not set +# CONFIG_MWIFIEX_SDIO is not set +# CONFIG_MWIFIEX_PCIE is not set +CONFIG_KEYBOARD_SNVS_PWRKEY=y +# CONFIG_KEYBOARD_IMX_SC_KEY is not set +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set +# CONFIG_INPUT_PM8941_PWRKEY is not set +# CONFIG_INPUT_PM8XXX_VIBRATOR is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_PWM_VIBRA is not set +# CONFIG_INPUT_HISI_POWERKEY is not set +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_8250_BCM2835AUX is not set +# CONFIG_SERIAL_8250_OMAP is not set +# CONFIG_SERIAL_8250_MT6577 is not set +# CONFIG_SERIAL_8250_UNIPHIER is not set +# CONFIG_SERIAL_MESON is not set +# CONFIG_SERIAL_MESON_CONSOLE is not set +# CONFIG_SERIAL_SAMSUNG is not set +# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set +# CONFIG_SERIAL_TEGRA is not set +# CONFIG_SERIAL_TEGRA_TCU is not set +# CONFIG_SERIAL_SH_SCI is not set +# CONFIG_SERIAL_MSM is not set +# CONFIG_SERIAL_MSM_CONSOLE is not set +# CONFIG_SERIAL_QCOM_GENI is not set +# CONFIG_SERIAL_QCOM_GENI_CONSOLE is not set +# CONFIG_SERIAL_MVEBU_UART is not set +# CONFIG_SERIAL_OWL is not set +# CONFIG_I2C_MUX is not set +# CONFIG_I2C_BCM2835 is not set +# CONFIG_I2C_MESON is not set +# CONFIG_I2C_MT65XX is not set +# CONFIG_I2C_MV64XXX is not set +# CONFIG_I2C_OMAP is not set +# CONFIG_I2C_OWL is not set +# CONFIG_I2C_PXA is not set +# CONFIG_I2C_QCOM_CCI is not set +# CONFIG_I2C_QCOM_GENI is not set +# CONFIG_I2C_QUP is not set +# CONFIG_I2C_RIIC is not set +# CONFIG_I2C_S3C2410 is not set +# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_TEGRA is not set +# CONFIG_I2C_UNIPHIER_F is not set +# CONFIG_I2C_RCAR is not set +# CONFIG_SPI_ARMADA_3700 is not set +# CONFIG_SPI_BCM2835 is not set +# CONFIG_SPI_BCM2835AUX is not set +# CONFIG_SPI_DESIGNWARE is not set +# CONFIG_SPI_DW_DMA is not set +# CONFIG_SPI_DW_MMIO is not set +CONFIG_SPI_IMX=y +# CONFIG_SPI_FSL_DSPI is not set +# CONFIG_SPI_MESON_SPICC is not set +# CONFIG_SPI_MESON_SPIFC is not set +# CONFIG_SPI_ORION is not set +CONFIG_SPI_SPIDEV=y +CONFIG_SPI_SLAVE=y +CONFIG_SPI_SLAVE_TIME=y +CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y +CONFIG_PINCTRL=y +# CONFIG_SPI_RPCIF is not set +# CONFIG_SPI_RSPI is not set +# CONFIG_SPI_QCOM_QSPI is not set +# CONFIG_SPI_QUP is not set +# CONFIG_SPI_QCOM_GENI is not set +# CONFIG_SPI_S3C64XX is not set +# CONFIG_SPI_SH_MSIOF is not set +# CONFIG_SPI_SUN6I is not set +# CONFIG_SPMI is not set +# CONFIG_PINCTRL_OWL is not set +# CONFIG_PINCTRL_S700 is not set +# CONFIG_PINCTRL_S900 is not set +CONFIG_GPIOLIB=y +# CONFIG_PINCTRL_MSM is not set +# CONFIG_PINCTRL_IPQ8074 is not set +# CONFIG_PINCTRL_IPQ6018 is not set +# CONFIG_PINCTRL_MSM8916 is not set +# CONFIG_PINCTRL_MSM8994 is not set +# CONFIG_PINCTRL_MSM8996 is not set +# CONFIG_PINCTRL_MSM8998 is not set +# CONFIG_PINCTRL_QCS404 is not set +# CONFIG_PINCTRL_QDF2XXX is not set +# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set +# CONFIG_PINCTRL_SC7180 is not set +# CONFIG_PINCTRL_SC7280 is not set +# CONFIG_PINCTRL_SDM845 is not set +# CONFIG_PINCTRL_SM8150 is not set +# CONFIG_PINCTRL_SM8250 is not set +# CONFIG_PINCTRL_SM8350 is not set +# CONFIG_PINCTRL_SM8450 is not set +# CONFIG_PINCTRL_LPASS_LPI is not set +# CONFIG_GPIO_DAVINCI is not set +# CONFIG_GPIO_MAX77620 is not set +# CONFIG_GPIO_MPC8XXX is not set +# CONFIG_GPIO_RCAR is not set +# CONFIG_GPIO_UNIPHIER is not set +# CONFIG_GPIO_VISCONTI is not set +# CONFIG_GPIO_XGENE_SB is not set +# CONFIG_GPIO_SL28CPLD is not set +CONFIG_POWER_RESET_BRCMSTB=y +# CONFIG_POWER_RESET_MSM is not set +# CONFIG_POWER_RESET_QCOM_PON is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_BQ25890 is not set +# CONFIG_CHARGER_BQ25980 is not set +# CONFIG_SENSORS_JC42 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set +# CONFIG_SENSORS_SL28CPLD is not set +CONFIG_THERMAL_WRITABLE_TRIPS=y +CONFIG_IMX_SC_THERMAL=y +CONFIG_IMX8MM_THERMAL=y +CONFIG_QORIQ_THERMAL=y +# CONFIG_SUN8I_THERMAL is not set +# CONFIG_ROCKCHIP_THERMAL is not set +# CONFIG_RCAR_THERMAL is not set +# CONFIG_RCAR_GEN3_THERMAL is not set +# CONFIG_RZG2L_THERMAL is not set +# CONFIG_ARMADA_THERMAL is not set +# CONFIG_BCM2711_THERMAL is not set +# CONFIG_BCM2835_THERMAL is not set +# CONFIG_BRCMSTB_THERMAL is not set +# CONFIG_EXYNOS_THERMAL is not set +# CONFIG_TEGRA_SOCTHERM is not set +# CONFIG_TEGRA_BPMP_THERMAL is not set +# CONFIG_QCOM_TSENS is not set +# CONFIG_QCOM_SPMI_TEMP_ALARM is not set +# CONFIG_QCOM_LMH is not set +# CONFIG_UNIPHIER_THERMAL is not set +# CONFIG_SL28CPLD_WATCHDOG is not set +# CONFIG_S3C2410_WATCHDOG is not set +# CONFIG_BCM7038_WDT is not set +# CONFIG_SUNXI_WATCHDOG is not set +CONFIG_IMX_SC_WDT=y +CONFIG_IMX7ULP_WDT=y +# CONFIG_QCOM_WDT is not set +# CONFIG_MESON_GXBB_WATCHDOG is not set +# CONFIG_MESON_WATCHDOG is not set +# CONFIG_RENESAS_WDT is not set +# CONFIG_RENESAS_RZG2LWDT is not set +# CONFIG_UNIPHIER_WATCHDOG is not set +# CONFIG_BCM2835_WDT is not set +# CONFIG_MFD_ALTERA_SYSMGR is not set +# CONFIG_MFD_AXP20X_RSB is not set +# CONFIG_MFD_EXYNOS_LPASS is not set +# CONFIG_MFD_HI655X_PMIC is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_SIMPLE_MFD_I2C is not set +# CONFIG_MFD_SPMI_PMIC is not set +# CONFIG_MFD_SL28CPLD is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_HI655X is not set +# CONFIG_REGULATOR_MP8859 is not set +# CONFIG_REGULATOR_MT6358 is not set +# CONFIG_REGULATOR_MT6397 is not set +# CONFIG_REGULATOR_PF8X00 is not set +# CONFIG_REGULATOR_QCOM_RPMH is not set +# CONFIG_REGULATOR_QCOM_SMD_RPM is not set +# CONFIG_REGULATOR_QCOM_SPMI is not set +# CONFIG_REGULATOR_TPS65132 is not set +CONFIG_MEDIA_SUPPORT=y +# CONFIG_RC_CORE is not set +# CONFIG_RC_DECODERS is not set +# CONFIG_RC_DEVICES is not set +# CONFIG_IR_MESON is not set +# CONFIG_IR_SUNXI is not set +CONFIG_SDR_PLATFORM_DRIVERS=y +# CONFIG_VIDEO_QCOM_CAMSS is not set +# CONFIG_VIDEO_RCAR_CSI2 is not set +# CONFIG_VIDEO_RCAR_VIN is not set +# CONFIG_VIDEO_SUN6I_CSI is not set +# CONFIG_VIDEO_RCAR_ISP is not set +# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set +# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set +# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set +# CONFIG_VIDEO_RENESAS_FDP1 is not set +# CONFIG_VIDEO_RENESAS_FCP is not set +# CONFIG_VIDEO_RENESAS_VSP1 is not set +# CONFIG_VIDEO_QCOM_VENUS is not set +# CONFIG_VIDEO_RCAR_DRIF is not set +CONFIG_VIDEO_OV5640=y +CONFIG_DRM=y +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +# CONFIG_DRM_NOUVEAU is not set +# CONFIG_DRM_EXYNOS is not set +# CONFIG_DRM_EXYNOS5433_DECON is not set +# CONFIG_DRM_EXYNOS7_DECON is not set +# CONFIG_DRM_EXYNOS_DSI is not set +# CONFIG_DRM_EXYNOS_DP is not set +# CONFIG_DRM_EXYNOS_HDMI is not set +# CONFIG_DRM_EXYNOS_MIC is not set +# CONFIG_DRM_ROCKCHIP is not set +# CONFIG_ROCKCHIP_ANALOGIX_DP is not set +# CONFIG_ROCKCHIP_CDN_DP is not set +# CONFIG_ROCKCHIP_DW_HDMI is not set +# CONFIG_ROCKCHIP_DW_MIPI_DSI is not set +# CONFIG_ROCKCHIP_INNO_HDMI is not set +# CONFIG_ROCKCHIP_LVDS is not set +# CONFIG_DRM_RCAR_DU is not set +# CONFIG_DRM_RCAR_USE_LVDS is not set +# CONFIG_DRM_RCAR_MIPI_DSI is not set +# CONFIG_DRM_SUN4I is not set +# CONFIG_DRM_SUN6I_DSI is not set +# CONFIG_DRM_SUN8I_DW_HDMI is not set +# CONFIG_DRM_SUN8I_MIXER is not set +# CONFIG_DRM_MSM is not set +# CONFIG_DRM_TEGRA is not set +# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set +# CONFIG_DRM_PANEL_LVDS is not set +# CONFIG_DRM_PANEL_SIMPLE is not set +# CONFIG_DRM_PANEL_EDP is not set +# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set +# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set +# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set +CONFIG_DRM_DISPLAY_CONNECTOR=m +# CONFIG_DRM_LONTIUM_LT8912B is not set +CONFIG_DRM_NWL_MIPI_DSI=y +# CONFIG_DRM_LONTIUM_LT9611UXC is not set +# CONFIG_DRM_PARADE_PS8640 is not set +CONFIG_DRM_I2C_ADV7511=y +CONFIG_DRM_DW_HDMI_I2S_AUDIO=m +CONFIG_DRM_IMX_DCSS=y +# CONFIG_DRM_VC4 is not set +# CONFIG_DRM_HISI_HIBMC is not set +CONFIG_DRM_MXSFB=y +# CONFIG_DRM_MEDIATEK is not set +# CONFIG_DRM_MEDIATEK_HDMI is not set +# CONFIG_DRM_MESON is not set +CONFIG_DRM_LEGACY=y +# CONFIG_FB is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_EFI is not set +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set +# CONFIG_BACKLIGHT_PWM is not set +# CONFIG_BACKLIGHT_LP855X is not set +# CONFIG_LOGO is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_ALOOP=m +# CONFIG_SND_HDA_TEGRA is not set +# CONFIG_SND_HDA_CODEC_HDMI is not set +CONFIG_SND_SOC_FSL_ASRC=y +# CONFIG_SND_SOC_FSL_AUDMIX is not set +# CONFIG_SND_SOC_FSL_SPDIF is not set +CONFIG_SND_SOC_FSL_EASRC=y +CONFIG_SND_IMX_SOC=y +CONFIG_SND_SOC_FSL_ASOC_CARD=y +CONFIG_SND_SOC_SOF_TOPLEVEL=y +CONFIG_SND_SOC_SOF_OF=m +CONFIG_SND_SOC_SOF_IMX_TOPLEVEL=y +CONFIG_SND_SOC_AK4458=y +CONFIG_SND_SOC_AK5558=y +CONFIG_SND_SOC_PCM512x_I2C=y +CONFIG_SND_SIMPLE_CARD=y +CONFIG_SND_AUDIO_GRAPH_CARD=y +CONFIG_USB_CONN_GPIO=y +# CONFIG_SND_BCM2835_SOC_I2S is not set +# CONFIG_SND_SOC_CROS_EC_CODEC is not set +# CONFIG_SND_SOC_DMIC is not set +# CONFIG_SND_SOC_FSL_MICFIL is not set +# CONFIG_SND_SOC_IMX_SGTL5000 is not set +# CONFIG_SND_SOC_IMX_SPDIF is not set +# CONFIG_SND_SOC_IMX_AUDMIX is not set +# CONFIG_SND_MESON_AXG_SOUND_CARD is not set +# CONFIG_SND_MESON_GX_SOUND_CARD is not set +# CONFIG_SND_SOC_QCOM is not set +# CONFIG_SND_SOC_APQ8016_SBC is not set +# CONFIG_SND_SOC_MSM8996 is not set +# CONFIG_SND_SOC_MAX98357A is not set +# CONFIG_SND_SOC_MAX98927 is not set +# CONFIG_SND_SOC_SDM845 is not set +# CONFIG_SND_SOC_SM8250 is not set +# CONFIG_SND_SOC_ROCKCHIP is not set +# CONFIG_SND_SOC_ROCKCHIP_SPDIF is not set +# CONFIG_SND_SOC_ROCKCHIP_RT5645 is not set +# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set +# CONFIG_SND_SOC_SAMSUNG is not set +# CONFIG_SND_SOC_RCAR is not set +# CONFIG_SND_SOC_RZ is not set +# CONFIG_SND_SOC_SGTL5000 is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SUN4I_I2S is not set +# CONFIG_SND_SUN4I_SPDIF is not set +# CONFIG_SND_SOC_TEGRA is not set +# CONFIG_SND_SOC_TEGRA210_AHUB is not set +# CONFIG_SND_SOC_TEGRA210_DMIC is not set +# CONFIG_SND_SOC_TEGRA210_I2S is not set +# CONFIG_SND_SOC_TEGRA186_DSPK is not set +# CONFIG_SND_SOC_TEGRA210_ADMAIF is not set +# CONFIG_SND_SOC_TEGRA210_MVC is not set +# CONFIG_SND_SOC_TEGRA210_SFC is not set +# CONFIG_SND_SOC_TEGRA210_AMX is not set +# CONFIG_SND_SOC_TEGRA210_ADX is not set +# CONFIG_SND_SOC_TEGRA210_MIXER is not set +# CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD is not set +# CONFIG_SND_SOC_AK4613 is not set +# CONFIG_SND_SOC_ES7134 is not set +# CONFIG_SND_SOC_ES7241 is not set +# CONFIG_SND_SOC_GTM601 is not set +# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set +# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set +# CONFIG_SND_SOC_PCM3168A_I2C is not set +# CONFIG_SND_SOC_RT5659 is not set +# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set +# CONFIG_SND_SOC_SIMPLE_MUX is not set +# CONFIG_SND_SOC_TAS571X is not set +# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set +# CONFIG_SND_SOC_WCD934X is not set +# CONFIG_SND_SOC_WM8904 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WSA881X is not set +# CONFIG_SND_SOC_NAU8822 is not set +# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set +# CONFIG_SND_SOC_LPASS_VA_MACRO is not set +# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set +# CONFIG_HID_MULTITOUCH is not set +# CONFIG_I2C_HID_ACPI is not set +# CONFIG_I2C_HID_OF is not set +# CONFIG_USB_XHCI_PCI_RENESAS is not set +# CONFIG_USB_XHCI_TEGRA is not set +# CONFIG_USB_EHCI_EXYNOS is not set +# CONFIG_USB_OHCI_EXYNOS is not set +CONFIG_USB_HCD_TEST_MODE=y +# CONFIG_USB_RENESAS_USBHS_HCD is not set +# CONFIG_USB_RENESAS_USBHS is not set +CONFIG_USB_UAS=y +# CONFIG_USB_CDNS_SUPPORT is not set +# CONFIG_USB_CDNS3 is not set +# CONFIG_USB_CDNS3_GADGET is not set +# CONFIG_USB_CDNS3_HOST is not set +# CONFIG_USB_MTU3 is not set +# CONFIG_USB_MUSB_SUNXI is not set +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_TEST=m +CONFIG_USB_EHSET_TEST_FIXTURE=y +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_MXS_PHY=y +# CONFIG_REALTEK_PHY is not set +CONFIG_USB_ULPI=y +CONFIG_USB_SNP_UDC_PLAT=y +CONFIG_USB_BDC_UDC=y +CONFIG_USB_CONFIGFS=y +# CONFIG_USB_RENESAS_USBHS_UDC is not set +# CONFIG_USB_RENESAS_USB3 is not set +# CONFIG_USB_TEGRA_XUDC is not set +CONFIG_USB_CONFIGFS_F_LB_SS=y +CONFIG_USB_CONFIGFS_F_UAC1=y +CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y +CONFIG_USB_CONFIGFS_F_UAC2=y +CONFIG_USB_CONFIGFS_F_MIDI=y +CONFIG_USB_CONFIGFS_F_HID=y +CONFIG_USB_CONFIGFS_F_UVC=y +CONFIG_USB_ZERO=m +CONFIG_USB_AUDIO=m +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_TYPEC=y +CONFIG_TYPEC_TCPM=y +CONFIG_TYPEC_TCPCI=y +# CONFIG_TYPEC_TPS6598X is not set +# CONFIG_MMC_SDHCI_ACPI is not set +# CONFIG_MMC_SDHCI_TEGRA is not set +# CONFIG_MMC_MESON_GX is not set +# CONFIG_MMC_SDHCI_MSM is not set +# CONFIG_MMC_SDHI is not set +# CONFIG_MMC_UNIPHIER is not set +# CONFIG_MMC_DW_ROCKCHIP is not set +# CONFIG_MMC_SUNXI is not set +# CONFIG_MMC_BCM2835 is not set +# CONFIG_MMC_MTK is not set +# CONFIG_MMC_OWL is not set +# CONFIG_LEDS_LM3692X is not set +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_EDAC_LAYERSCAPE is not set +# CONFIG_RTC_DRV_HYM8563 is not set +# CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_RV3028 is not set +# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set +# CONFIG_RTC_DRV_S3C is not set +CONFIG_RTC_DRV_SNVS=y +CONFIG_RTC_DRV_IMX_SC=y +# CONFIG_RTC_DRV_SUN6I is not set +# CONFIG_RTC_DRV_ARMADA38X is not set +# CONFIG_RTC_DRV_PM8XXX is not set +# CONFIG_RTC_DRV_TEGRA is not set +# CONFIG_RTC_DRV_XGENE is not set +# CONFIG_RTC_DRV_MT6397 is not set +CONFIG_BCM_SBA_RAID=m +# CONFIG_DMA_BCM2835 is not set +# CONFIG_DMA_SUN6I is not set +CONFIG_FSL_QDMA=m +CONFIG_IMX_SDMA=y +# CONFIG_K3_DMA is not set +# CONFIG_MV_XOR is not set +CONFIG_MXS_DMA=y +# CONFIG_OWL_DMA is not set +# CONFIG_TEGRA186_GPC_DMA is not set +# CONFIG_TEGRA20_APB_DMA is not set +# CONFIG_TEGRA210_ADMA is not set +# CONFIG_QCOM_BAM_DMA is not set +CONFIG_DMATEST=y +CONFIG_DMABUF_HEAPS=y +CONFIG_DMABUF_HEAPS_SYSTEM=y +CONFIG_DMABUF_HEAPS_CMA=y +# CONFIG_RCAR_DMAC is not set +# CONFIG_RENESAS_USB_DMAC is not set +# CONFIG_RZ_DMAC is not set +# CONFIG_TI_K3_UDMA is not set +# CONFIG_TI_K3_UDMA_GLUE_LAYER is not set +# CONFIG_VFIO_PCI is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_XEN_GNTDEV is not set +# CONFIG_XEN_GRANT_DEV_ALLOC is not set +# CONFIG_VIDEO_HANTRO is not set +# CONFIG_VIDEO_IMX_MEDIA is not set +CONFIG_CROS_EC_TYPEC=y +# CONFIG_CLK_VEXPRESS_OSC is not set +# CONFIG_COMMON_CLK_SCMI is not set +# CONFIG_COMMON_CLK_FSL_SAI is not set +CONFIG_COMMON_CLK_XGENE=y +# CONFIG_COMMON_CLK_BD718XX is not set +# CONFIG_CLK_RASPBERRYPI is not set +# CONFIG_CLK_IMX8MM is not set +# CONFIG_CLK_IMX8MP is not set +# CONFIG_CLK_IMX8MQ is not set +# CONFIG_CLK_IMX8QXP is not set +# CONFIG_CLK_IMX8ULP is not set +# CONFIG_TI_SCI_CLK is not set +# CONFIG_COMMON_CLK_QCOM is not set +# CONFIG_QCOM_A53PLL is not set +# CONFIG_QCOM_CLK_APCS_MSM8916 is not set +# CONFIG_QCOM_CLK_APCC_MSM8996 is not set +# CONFIG_QCOM_CLK_SMD_RPM is not set +# CONFIG_QCOM_CLK_RPMH is not set +# CONFIG_IPQ_GCC_6018 is not set +# CONFIG_IPQ_GCC_8074 is not set +# CONFIG_MSM_GCC_8916 is not set +# CONFIG_MSM_GCC_8994 is not set +# CONFIG_MSM_MMCC_8996 is not set +# CONFIG_MSM_GCC_8998 is not set +# CONFIG_QCS_GCC_404 is not set +# CONFIG_SC_GCC_7180 is not set +# CONFIG_SC_GCC_7280 is not set +# CONFIG_SDM_CAMCC_845 is not set +# CONFIG_SDM_GPUCC_845 is not set +# CONFIG_SDM_VIDEOCC_845 is not set +# CONFIG_SDM_DISPCC_845 is not set +# CONFIG_SM_GCC_8350 is not set +# CONFIG_SM_GCC_8450 is not set +# CONFIG_SM_GPUCC_8150 is not set +# CONFIG_SM_GPUCC_8250 is not set +# CONFIG_QCOM_HFPLL is not set +# CONFIG_CLK_GFM_LPASS_SM8250 is not set +# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set +# CONFIG_HWSPINLOCK_QCOM is not set +# CONFIG_RENESAS_OSTM is not set +# CONFIG_BCM2835_MBOX is not set +# CONFIG_QCOM_APCS_IPC is not set +# CONFIG_QCOM_IPCC is not set +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +# CONFIG_ROCKCHIP_IOMMU is not set +# CONFIG_TEGRA_IOMMU_SMMU is not set +# CONFIG_MTK_IOMMU is not set +# CONFIG_QCOM_IOMMU is not set +CONFIG_IMX_REMOTEPROC=y +CONFIG_IMX_DSP_REMOTEPROC=y +CONFIG_RPMSG_CHAR=y +# CONFIG_QCOM_Q6V5_MSS is not set +# CONFIG_QCOM_Q6V5_PAS is not set +# CONFIG_QCOM_SYSMON is not set +# CONFIG_QCOM_WCNSS_PIL is not set +# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set +# CONFIG_RPMSG_QCOM_SMD is not set +CONFIG_SOC_BRCMSTB=y +# CONFIG_OWL_PM_DOMAINS is not set +# CONFIG_RASPBERRYPI_POWER is not set +# CONFIG_FSL_DPAA is not set +# CONFIG_FSL_MC_DPIO is not set +CONFIG_SOC_TI=y +# CONFIG_DEVFREQ_GOV_USERSPACE is not set +# CONFIG_MTK_DEVAPC is not set +# CONFIG_MTK_PMIC_WRAP is not set +# CONFIG_QCOM_AOSS_QMP is not set +# CONFIG_QCOM_COMMAND_DB is not set +# CONFIG_QCOM_CPR is not set +# CONFIG_QCOM_GENI_SE is not set +# CONFIG_QCOM_RMTFS_MEM is not set +# CONFIG_QCOM_RPMH is not set +# CONFIG_QCOM_RPMHPD is not set +# CONFIG_QCOM_RPMPD is not set +# CONFIG_QCOM_SMEM is not set +# CONFIG_QCOM_SMD_RPM is not set +# CONFIG_QCOM_SMP2P is not set +# CONFIG_QCOM_SMSM is not set +# CONFIG_QCOM_SOCINFO is not set +# CONFIG_QCOM_STATS is not set +# CONFIG_QCOM_WCNSS_CTRL is not set +# CONFIG_QCOM_APR is not set +# CONFIG_ARCH_R8A77995 is not set +# CONFIG_ARCH_R8A77990 is not set +# CONFIG_ARCH_R8A77950 is not set +# CONFIG_ARCH_R8A77951 is not set +# CONFIG_ARCH_R8A77965 is not set +# CONFIG_ARCH_R8A77960 is not set +# CONFIG_ARCH_R8A77961 is not set +# CONFIG_ARCH_R8A779F0 is not set +# CONFIG_ARCH_R8A77980 is not set +# CONFIG_ARCH_R8A77970 is not set +# CONFIG_ARCH_R8A779A0 is not set +# CONFIG_ARCH_R8A774C0 is not set +# CONFIG_ARCH_R8A774E1 is not set +# CONFIG_ARCH_R8A774A1 is not set +# CONFIG_ARCH_R8A774B1 is not set +# CONFIG_ARCH_R9A07G044 is not set +# CONFIG_ROCKCHIP_IODOMAIN is not set +# CONFIG_ROCKCHIP_PM_DOMAINS is not set +# CONFIG_ARCH_TEGRA_132_SOC is not set +# CONFIG_ARCH_TEGRA_210_SOC is not set +# CONFIG_ARCH_TEGRA_186_SOC is not set +# CONFIG_ARCH_TEGRA_194_SOC is not set +# CONFIG_ARCH_TEGRA_234_SOC is not set +# CONFIG_TI_SCI_PM_DOMAINS is not set +# CONFIG_ARM_IMX_BUS_DEVFREQ is not set +# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set +CONFIG_MEMORY=y +# CONFIG_RENESAS_RPCIF is not set +CONFIG_IMX8QXP_ADC=y +# CONFIG_EXYNOS_ADC is not set +# CONFIG_QCOM_SPMI_VADC is not set +# CONFIG_QCOM_SPMI_ADC5 is not set +# CONFIG_ROCKCHIP_SARADC is not set +# CONFIG_RZG2L_ADC is not set +# CONFIG_TI_ADS1015 is not set +CONFIG_IIO_ST_LSM6DSX=y +# CONFIG_SENSORS_ISL29018 is not set +# CONFIG_VCNL4000 is not set +# CONFIG_IIO_ST_MAGN_3AXIS is not set +# CONFIG_MPL3115 is not set +# CONFIG_PWM_BCM2835 is not set +# CONFIG_PWM_BRCMSTB is not set +CONFIG_PWM_FSL_FTM=m +CONFIG_PWM_IMX27=y +# CONFIG_PWM_MESON is not set +# CONFIG_PWM_MTK_DISP is not set +# CONFIG_PWM_MEDIATEK is not set +# CONFIG_PWM_RCAR is not set +# CONFIG_PWM_RENESAS_TPU is not set +# CONFIG_PWM_ROCKCHIP is not set +# CONFIG_PWM_SAMSUNG is not set +# CONFIG_PWM_SL28CPLD is not set +# CONFIG_PWM_SUN4I is not set +# CONFIG_PWM_TEGRA is not set +# CONFIG_PWM_VISCONTI is not set +# CONFIG_SL28CPLD_INTC is not set +# CONFIG_QCOM_PDC is not set +# CONFIG_RESET_QCOM_AOSS is not set +# CONFIG_RESET_QCOM_PDC is not set +# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set +# CONFIG_RESET_TI_SCI is not set +CONFIG_PHY_CADENCE_SALVO=y +CONFIG_PHY_MIXEL_MIPI_DPHY=y +# CONFIG_PHY_SUN4I_USB is not set +# CONFIG_PHY_CADENCE_SIERRA is not set +# CONFIG_PHY_FSL_IMX8M_PCIE is not set +# CONFIG_PHY_HI6220_USB is not set +# CONFIG_PHY_HISTB_COMBPHY is not set +# CONFIG_PHY_HISI_INNO_USB2 is not set +# CONFIG_PHY_MVEBU_CP110_COMPHY is not set +# CONFIG_PHY_MTK_TPHY is not set +# CONFIG_PHY_QCOM_QMP is not set +# CONFIG_PHY_QCOM_QUSB2 is not set +CONFIG_PHY_SAMSUNG_USB2=y +# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set +# CONFIG_PHY_RCAR_GEN3_PCIE is not set +# CONFIG_PHY_RCAR_GEN3_USB2 is not set +# CONFIG_PHY_RCAR_GEN3_USB3 is not set +# CONFIG_PHY_ROCKCHIP_EMMC is not set +# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set +# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set +# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set +# CONFIG_PHY_ROCKCHIP_PCIE is not set +# CONFIG_PHY_ROCKCHIP_TYPEC is not set +# CONFIG_PHY_SAMSUNG_UFS is not set +# CONFIG_PHY_UNIPHIER_USB2 is not set +# CONFIG_PHY_UNIPHIER_USB3 is not set +# CONFIG_PHY_TEGRA_XUSB is not set +# CONFIG_PHY_AM654_SERDES is not set +# CONFIG_PHY_J721E_WIZ is not set +CONFIG_FSL_IMX8_DDR_PMU=y +# CONFIG_QCOM_L2_PMU is not set +# CONFIG_QCOM_L3_PMU is not set +# CONFIG_MTK_EFUSE is not set +# CONFIG_QCOM_QFPROM is not set +# CONFIG_ROCKCHIP_EFUSE is not set +# CONFIG_NVMEM_SUNXI_SID is not set +# CONFIG_UNIPHIER_EFUSE is not set +# CONFIG_MESON_EFUSE is not set +# CONFIG_NVMEM_RMEM is not set +# CONFIG_NVMEM_LAYERSCAPE_SFP is not set +# CONFIG_FPGA_MGR_ALTERA_CVP is not set +# CONFIG_FPGA_MGR_STRATIX10_SOC is not set +# CONFIG_SLIM_QCOM_NGD_CTRL is not set +# CONFIG_INTERCONNECT_IMX is not set +# CONFIG_INTERCONNECT_IMX8MM is not set +# CONFIG_INTERCONNECT_IMX8MN is not set +# CONFIG_INTERCONNECT_IMX8MQ is not set +# CONFIG_INTERCONNECT_QCOM is not set +# CONFIG_INTERCONNECT_QCOM_MSM8916 is not set +# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set +# CONFIG_INTERCONNECT_QCOM_SC7280 is not set +# CONFIG_INTERCONNECT_QCOM_SDM845 is not set +# CONFIG_INTERCONNECT_QCOM_SM8150 is not set +# CONFIG_INTERCONNECT_QCOM_SM8250 is not set +# CONFIG_INTERCONNECT_QCOM_SM8350 is not set +# CONFIG_INTERCONNECT_QCOM_SM8450 is not set +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TMPFS_XATTR is not set +CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_CRYPTO_USER=y +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_DH=m +# CONFIG_CRYPTO_CURVE25519 is not set +CONFIG_CRYPTO_CHACHA20POLY1305=m +CONFIG_CRYPTO_CFB=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_OFB=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_STREEBOG=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_AEAD=m +# CONFIG_CRYPTO_DEV_SUN8I_CE is not set +# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set +# CONFIG_CRYPTO_DEV_QCOM_RNG is not set +CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m +CONFIG_INDIRECT_PIO=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC8 is not setboard/bsh/imx8mn-bsh-smm-s2/linux.fragment line 931
Quoted 10 lines
board/bsh/imx8mn-bsh-smm-s2/linux.fragment new file +10
-0+# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set +# CONFIG_CRYPTO_DEV_HISI_ZIP is not set +# CONFIG_CRYPTO_DEV_HISI_HPRE is not set +# CONFIG_CRYPTO_DEV_HISI_TRNG is not set +CONFIG_IRQ_POLL=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_INFO_REDUCED is not set +CONFIG_CORESIGHT=y +CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y +CONFIG_CORESIGHT_SOURCE_ETM4X=yThis fragment ^^^ must be shrinked with:
Quoted 2 lines
$ make savedefconfig This way it should reduce a lot.
Done, the configuration has shrunk but not so much.
Quoted 57 lines
Quoted 57 lines
board/bsh/imx8mn-bsh-smm-s2/nand-full.lst new file +29
-0@@ -0,0 +1,29 @@ +# @_flash.bin | bootloader +# @_image [_flash.bin] | image burn to nand, default is the same as bootloader +# @_filesystem | filesystem to burn +# @_kernel | kernel image +# @_dtb | dtb image + +# This command will be run when ROM support stream mode +# i.MX8QXP, i.MX8QM +SDPS: boot -f _flash.bin + +FB: ucmd setenv fastboot_buffer ${loadaddr} +FB: download -f _image +# Burn image to nandfit partition if needed +FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi; +FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize} + +FB[-t 10000]: ucmd ubi part nandrootfs +FB[-t 10000]: ucmd ubi create root - +FB: download -f _filesystem +FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize} + +FB: download -f _kernel +FB[-t 10000]: ucmd nand write ${loadaddr} nandkernel ${filesize} + +FB: download -f _dtb +FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize} + +FB: reboot +FB: doneboard/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch new file +15
-0@@ -0,0 +1,64 @@ +From fd270493d83fa97568f605552656f48c932d1237 Mon Sep 17 00:00:00 2001 +From: Dario Binacchi <[email protected]> +Date: Sun, 22 May 2022 17:40:15 +0200 +Subject: [PATCH 1/2] dmaengine: mxs: use platform_driver_register + +Driver registration fails on SOC imx8mn as its supplier, the clock +control module, is probed later than subsys initcall level. This driver +uses platform_driver_probe which is not compatible with deferred probing +and won't be probed again later if probe function fails due to clock not +being available at that time. + +This patch replaces the use of platform_driver_probe with +platform_driver_register which will allow probing the driver later again +when the clock control module will be available. +
Quoted 8 lines
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch line 20
Quoted 5 lines
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch new file +5
-0+Fixes: a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28") +Co-developed-by: Michael Trimarchi <[email protected]> +Signed-off-by: Michael Trimarchi <[email protected]> +Signed-off-by: Dario Binacchi <[email protected]> +Cc: [email protected]Can you please indicate the upstream URL of the pending patch? For example a Patchwork link?
Ok
Quoted 3 lines
Also, here you should add 3 dashes to avoid having the version history to fall into the final commit log.
OK
Quoted 60 lines
Quoted 60 lines
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch new file +44
-0+ +Series-version: 5 + +Series-changes: 5 +- Update the commit message. +- Create a new patch to remove the warning generated by this patch. + +Series-changes: 4 +- Restore __init in front of mxs_dma_probe() definition. +- Rename the mxs_dma_driver variable to mxs_dma_driver_probe. +- Update the commit message. +- Use builtin_platform_driver() instead of module_platform_driver(). + +Series-changes: 3 +- Restore __init in front of mxs_dma_init() definition. + +Series-changes: 2 +- Add the tag "Cc: [email protected]" in the sign-off area. + +Series-cc: [email protected] +--- + drivers/dma/mxs-dma.c | 8 ++------ + 1 file changed, 2 insertions(+), 6 deletions(-) + +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c +index 994fc4d2aca4..18f8154b859b 100644 +--- a/drivers/dma/mxs-dma.c ++++ b/drivers/dma/mxs-dma.c +@@ -839,10 +839,6 @@ static struct platform_driver mxs_dma_driver = { + .name = "mxs-dma", + .of_match_table = mxs_dma_dt_ids, + }, ++ .probe = mxs_dma_probe, + }; +- +-static int __init mxs_dma_module_init(void) +-{ +- return platform_driver_probe(&mxs_dma_driver, mxs_dma_probe); +-} +-subsys_initcall(mxs_dma_module_init); ++builtin_platform_driver(mxs_dma_driver); +-- +2.32.0 +board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch new file +9
-0@@ -0,0 +1,35 @@ +From 145ee0b2e192da90348f1c77ea9c69ba7001159c Mon Sep 17 00:00:00 2001 +From: Dario Binacchi <[email protected]> +Date: Tue, 12 Jul 2022 15:15:19 +0200 +Subject: [PATCH 2/2] dmaengine: mxs: fix section mismatch + +The patch was suggested by the following modpost warning: + +WARNING: modpost: vmlinux.o(.data+0xa3900): Section mismatch in reference from the variable mxs_dma_driver to the function .init.text:mxs_dma_probe() +The variable mxs_dma_driver references
Quoted 8 lines
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch line 15
Quoted 6 lines
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch new file +6
-0+the function __init mxs_dma_probe() +If the reference is valid then annotate the +variable with __init* or __refdata (see linux/init.h) or name the variable: +*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console + +Signed-off-by: Dario Binacchi <[email protected]>Same here as above
Ok
Quoted 39 lines
Quoted 39 lines
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch new file +20
-0+--- + drivers/dma/mxs-dma.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c +index 18f8154b859b..a01953e06048 100644 +--- a/drivers/dma/mxs-dma.c ++++ b/drivers/dma/mxs-dma.c +@@ -834,7 +834,7 @@ static int __init mxs_dma_probe(struct platform_device *pdev) + return 0; + } + +-static struct platform_driver mxs_dma_driver = { ++static struct platform_driver mxs_dma_driver __initdata = { + .driver = { + .name = "mxs-dma", + .of_match_table = mxs_dma_dt_ids, +-- +2.32.0 +board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch new file +12
-0@@ -0,0 +1,159 @@ +From d818bfb185a9f62fc988141d2dbbf9e9bc8ffa5d Mon Sep 17 00:00:00 2001 +From: Michael Trimarchi <[email protected]> +Date: Sun, 22 May 2022 15:22:08 +0200 +Subject: [PATCH 06/10] include/configs: Remove rootwait=1 to all the affected + boards + +rootwait=1 is not a valid kernel boot parameters. According +to the documenation is only rootwait + +rootwait [KNL] Wait (indefinitely) for root device to show up. + Useful for devices that are detected asynchronously + (e.g. USB and MMC devices).
Quoted 8 lines
board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch line 18
Quoted 6 lines
board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch new file +6
-0+ +Fix: +Unknown kernel command line parameters "rootwait=1", will be passed to user space. + +Signed-off-by: Michael Trimarchi <[email protected]> +Reviewed-by: Heiko Schocher <[email protected]>Ditto
OK
Quoted 242 lines
Quoted 242 lines
board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch new file +141
-0+--- + include/configs/am335x_evm.h | 2 +- + include/configs/am43xx_evm.h | 2 +- + include/configs/baltos.h | 2 +- + include/configs/chiliboard.h | 2 +- + include/configs/etamin.h | 2 +- + include/configs/imx8mn_bsh_smm_s2.h | 2 +- + include/configs/siemens-am33x-common.h | 4 ++-- + include/configs/ti_armv7_keystone2.h | 2 +- + include/environment/ti/nand.h | 2 +- + 9 files changed, 10 insertions(+), 10 deletions(-) + +diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h +index fd5b209a52db..f301a6dc835b 100644 +--- a/include/configs/am335x_evm.h ++++ b/include/configs/am335x_evm.h +@@ -34,7 +34,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ +diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h +index 5057441f7506..1f5c3cd04e88 100644 +--- a/include/configs/am43xx_evm.h ++++ b/include/configs/am43xx_evm.h +@@ -166,7 +166,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ +diff --git a/include/configs/baltos.h b/include/configs/baltos.h +index b881d8c03fd7..7b43741fde7c 100644 +--- a/include/configs/baltos.h ++++ b/include/configs/baltos.h +@@ -37,7 +37,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=5\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "setenv loadaddr 0x84000000; " \ +diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h +index 82acda595f09..8bad0f9ac4b6 100644 +--- a/include/configs/chiliboard.h ++++ b/include/configs/chiliboard.h +@@ -20,7 +20,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdt_addr} NAND.u-boot-spl-os; " \ +diff --git a/include/configs/etamin.h b/include/configs/etamin.h +index dc83ab71908b..3548382d2036 100644 +--- a/include/configs/etamin.h ++++ b/include/configs/etamin.h +@@ -113,7 +113,7 @@ + "nand_active_ubi_vol=rootfs_a\0" \ + "rootfs_name=rootfs\0" \ + "kernel_name=uImage\0"\ +- "nand_root_fs_type=ubifs rootwait=1\0" \ ++ "nand_root_fs_type=ubifs rootwait\0" \ + "nand_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv ${partitionset_active} true;" \ +diff --git a/include/configs/imx8mn_bsh_smm_s2.h b/include/configs/imx8mn_bsh_smm_s2.h +index 098f23b206d1..f7529783692e 100644 +--- a/include/configs/imx8mn_bsh_smm_s2.h ++++ b/include/configs/imx8mn_bsh_smm_s2.h +@@ -21,7 +21,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:root rw ubi.mtd=nandrootfs\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdt_addr_r} nanddtb; " \ +diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h +index 08c4d52d658f..9f1a6cd51b40 100644 +--- a/include/configs/siemens-am33x-common.h ++++ b/include/configs/siemens-am33x-common.h +@@ -237,7 +237,7 @@ + "nand_active_ubi_vol=rootfs_a\0" \ + "nand_active_ubi_vol_A=rootfs_a\0" \ + "nand_active_ubi_vol_B=rootfs_b\0" \ +- "nand_root_fs_type=ubifs rootwait=1\0" \ ++ "nand_root_fs_type=ubifs rootwait\0" \ + "nand_src_addr=0x280000\0" \ + "nand_src_addr_A=0x280000\0" \ + "nand_src_addr_B=0x780000\0" \ +@@ -314,7 +314,7 @@ + "nand_active_ubi_vol=rootfs_a\0" \ + "rootfs_name=rootfs\0" \ + "kernel_name=uImage\0"\ +- "nand_root_fs_type=ubifs rootwait=1\0" \ ++ "nand_root_fs_type=ubifs rootwait\0" \ + "nand_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv ${partitionset_active} true;" \ +diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h +index 57f013cbf846..133daecf7164 100644 +--- a/include/configs/ti_armv7_keystone2.h ++++ b/include/configs/ti_armv7_keystone2.h +@@ -180,7 +180,7 @@ + "sf write ${loadaddr} 0 ${filesize}\0" \ + "burn_uboot_nand=nand erase 0 0x100000; " \ + "nand write ${loadaddr} 0 ${filesize}\0" \ +- "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 " \ ++ "args_all=setenv bootargs console=ttyS0,115200n8 rootwait " \ + KERNEL_MTD_PARTS \ + "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \ + "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ +diff --git a/include/environment/ti/nand.h b/include/environment/ti/nand.h +index 11dcefcc41ca..7d00afa2b10f 100644 +--- a/include/environment/ti/nand.h ++++ b/include/environment/ti/nand.h +@@ -14,7 +14,7 @@ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \ +- "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandrootfstype=ubifs rootwait\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ +-- +2.32.0 +board/bsh/imx8mn-bsh-smm-s2/post-build.sh new file +4
-0@@ -0,0 +1,4 @@ +#!/bin/sh +BOARD_DIR="$(dirname $0)" + +cp ${BOARD_DIR}/nand-full.lst ${BINARIES_DIR}board/bsh/imx8mn-bsh-smm-s2/readme.txt new file +75
-0@@ -0,0 +1,75 @@ +i.MX8MN BSH SMM S2 +================== + +This tutorial describes how to use the predefined Buildroot +configuration for the i.MX8MN BSH SMM S2 PRO board. + +Building +-------- + +Configure buildroot: + + $ make imx8mn_bsh_smm_s2_defconfig + +Change settings to fit your needs (optional): + + $ make menuconfig + +Compile everything and build the rootfs image: + + $ make + + +Result of the build +------------------- + +After building, the output/images directory contains: + + output/images/ + ├── bl31.bin + ├── ddr3* + ├── flash.bin + ├── freescale/imx8mn-bsh-smm-s2.dtb + ├── Image + ├── nand-full.lst + ├── rootfs.ext2 + ├── rootfs.ext4 -> rootfs.ext2 + ├── rootfs.tar + ├── rootfs.ubifs + ├── u-boot.bin + └── u-boot-spl.bin + + +Preparing the board +------------------- + +Plug the USB type A to micro B cable into the USB Debug +Connector (DBG UART). Use serial port settings 115200 8N1 +to access the debug console. + +Plug another USB type A to micro B cable into the USB-OTG +Connector (USB1). This connection is used to flash the board +firmware using the Freescale/NXP UUU tool. + +Connect the power supply/adaptor to the DC Power Jack (labelled ++5V). + + +Flashing +-------- + +Power up the board by switching on the Power ON Switch, which is +placed right next to the DC Jack. + +Enter the following U-Boot commands on the debug serial console: + + $ nand erase.chip + $ reset + +Flash the built images directly to board’s memory. On your computer, +run: + + $ board/bsh/imx8mn-bsh-smm-s2/flash.sh output/ + +It will flash the bootloader, the Device Tree Blob, the kernel image +and the UBI root file system.configs/imx8mn_bsh_smm_s2_defconfig new file +3
-0@@ -0,0 +1,40 @@ +BR2_aarch64=y +BR2_GLOBAL_PATCH_DIR="board/bsh/imx8mn-bsh-smm-s2/patches" +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
Quoted 8 lines
configs/imx8mn_bsh_smm_s2_defconfig line 7
Quoted 4 lines
configs/imx8mn_bsh_smm_s2_defconfig new file +4
-0+BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2/post-build.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18"Here ^^^ it would be better using the latest stable version of 5.18, at the moment it's 5.18.15, so testing again the resulting image with this Linux version.
I will update to 5.18.19, 5.18.15 introduced a regression in the nand controller configuration and
therefore it was necessary to add an additional patch (The revert of a revert !!!).
Quoted 38 lines
Quoted 24 lines
configs/imx8mn_bsh_smm_s2_defconfig new file +23
-0+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2" +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_PACKAGE_FIRMWARE_IMX_DDR3=y +BR2_TARGET_ROOTFS_UBIFS=y +BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000 +BR2_TARGET_ROOTFS_UBIFS_RT_NONE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07"configs/imx8mn_bsh_smm_s2_defconfig line 40
Quoted 10 lines
configs/imx8mn_bsh_smm_s2_defconfig new file +10
-0+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin" +BR2_TARGET_UBOOT_SPL=y +BR2_PACKAGE_HOST_UUU=yI've built successfully this defconfig using Buildroot's utils/docker-run so all host dependencies are met.
Quoted 13 lines
I don't have the board but I've tried anyway to call:
board/bsh/imx8mn-bsh-smm-s2/flash.shoutput
and of course it fails because there is not the board connected, but the error message is as follows:
"
terminate called after throwing an instance of 'std::runtime_error'
what(): Calllibusb_initfailureboard/bsh/imx8mn-bsh-smm-s2/flash.sh: line 25: 434921 Aborted
(core dumped)
"
it seems something related to uuu package that doesn't deal with errors that well. It's acceptable but it could be good to improve uuu package to deal with that error in a more elegant way if you can.
I am not a docker expert, but it seems to me that proper handling of USB is missing.
The exception is voluntarily thrown by uuu when the libusb_init call fails.
class CAutoDeInit
{
public:CAutoDeInit()
{
if (libusb_init(nullptr) < 0)
throw runtime_error{ "Call libusb_init failure" }; }
I compiled the defconfig in buildroot, without docker, and with no board connected the
uuu application does not raise that exception.
Quoted 2 lines
Waiting for V4.
Soon,
thanks and regards
Dario
Quoted 7 lines
Thank you All!
Best regards
--
Giulio Benetti
Benetti Engineering sas
Signature · 21 lines
Dario Binacchi Embedded Linux Developer [email protected] __________________________________ Amarula Solutions SRL Via Le Canevare 30, 31100 Treviso, Veneto, IT T. +39 042 243 5310 [email protected] www.amarulasolutions.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v3 2/2 configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig
In reply to Dario BinacchiFrom: Michael Trimarchi <[email protected]>
BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which provide input and output interfaces to a dedicated carrier board. It is designed mainly to provide graphical/video and connectivity interfaces to the appliance.
Board support package includes the following components:
- mainline Linux kernel 5.18
- mainline U-Boot 2022-07
- Default packages from buildroot
https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work together on platform mainline
Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314
---
Changes in v3:
- Update the commit description.
- Bump U-Boot to version 2022-07.
Changes in v2:
- Change commit subject line.
- Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and a config fragment for the changes.
---
DEVELOPERS | 4 +
.../imx8mn-bsh-smm-s2/linux.fragment | 0
board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf | 4 +
board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh | 23 ++++++
board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg | 17 +++++
board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh | 7 ++
board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh | 3 +
board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt | 73 +++++++++++++++++++
configs/imx8mn_bsh_smm_s2_defconfig | 2 +-
configs/imx8mn_bsh_smm_s2_pro_defconfig | 41 +++++++++++
10 files changed, 173 insertions(+), 1 deletion(-)
rename board/bsh/{ => common}/imx8mn-bsh-smm-s2/linux.fragment (100%)
create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf
create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh
create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg
create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh
create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh
create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt
create mode 100644 configs/imx8mn_bsh_smm_s2_pro_defconfigDEVELOPERS +4 -0
@@ -215,6 +215,8 @@ F: configs/snps_archs38_haps_defconfig F: configs/snps_archs38_hsdk_defconfig N: Ariel D'Alessandro <[email protected]> +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/axfsutils/ F: package/mali-t76x/
@@ -659,6 +661,7 @@ F: package/xinetd/ N: Dario Binacchi <[email protected]> F: board/bsh/ F: configs/imx8mn_bsh_smm_s2_defconfig +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/uuu/ N: Dario Binacchi <[email protected]>
@@ -2049,6 +2052,7 @@ F: package/python-pyzmq/ N: Michael Trimarchi <[email protected]> F: board/bsh/ F: configs/imx8mn_bsh_smm_s2_defconfig +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/python-spidev/ N: Michael Vetter <[email protected]>
board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment renamed from board/bsh/imx8mn-bsh-smm-s2/linux.fragment +0 -0
board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label buildroot + kernel /boot/Image + devicetree /boot/freescale/imx8mn-bsh-smm-s2pro.dtb + append root=PARTUUID=%PARTUUID% rootwait rw
board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh new file +23 -0
@@ -0,0 +1,23 @@ +#!/bin/bash + +if [ $# -eq 0 ]; then + OUTPUT_DIR=output +else + OUTPUT_DIR=$1 +fi + +if ! test -d "${OUTPUT_DIR}" ; then + echo "ERROR: no output directory specified." + echo "Usage: $0 OUTPUT_DIR" + echo "" + echo "Arguments:" + echo " OUTPUT_DIR The Buildroot output directory." + exit 1 +fi + +IMAGES_DIR=${OUTPUT_DIR}/images + +${OUTPUT_DIR}/host/bin/uuu -v -b emmc_all \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/sdcard.img +
board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg new file +17 -0
@@ -0,0 +1,17 @@ +image sdcard.img { + hdimage { + partition-table-type = "gpt" + } + + partition imx-boot { + in-partition-table = "no" + image = "flash.bin" + offset = 33K + } + + partition rootfs { + offset = 8M + image = "rootfs.ext4" + partition-uuid = %PARTUUID% + } +}
board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh new file +7 -0
@@ -0,0 +1,7 @@ +#!/bin/sh +BOARD_DIR="$(dirname $0)" +PARTUUID="$($HOST_DIR/bin/uuidgen)" + +install -d "$TARGET_DIR/boot/extlinux/" +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf" +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"
board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh new file +3 -0
@@ -0,0 +1,3 @@ +#!/bin/sh + +support/scripts/genimage.sh -c ${BINARIES_DIR}/genimage.cfg
board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt new file +73 -0
73 lines not on this page · raw message
configs/imx8mn_bsh_smm_s2_defconfig +1 -1
@@ -6,7 +6,7 @@ BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2" BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
configs/imx8mn_bsh_smm_s2_pro_defconfig new file +41 -0
41 lines not on this page · raw message
Signature · 6 lines
2.32.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v3 2/2] configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig
Hi Dario, Michael, Ariel, All,
Quoted 278 lines · Dario Binacchi
From: Michael Trimarchi <[email protected]>
BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which provide input and output interfaces to a dedicated carrier board. It is designed mainly to provide graphical/video and connectivity interfaces to the appliance.
Board support package includes the following components:
- mainline Linux kernel 5.18
- mainline U-Boot 2022-07
- Default packages from buildroothttps://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work together on platform mainline
Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314Cc Ariel D'Alessandro <[email protected]>Cc Jagan Teki <[email protected]>Cc Heiko Thiery <[email protected]>Cc Giulio Benetti <[email protected]>Reviewed-by Giulio Benetti <[email protected]>Signed-off-by Michael Trimarchi <[email protected]>Tested-by Ariel D'Alessandro <[email protected]>Signed-off-by Dario Binacchi <[email protected]>---
Changes in v3:
- Update the commit description.
- Bump U-Boot to version 2022-07.Changes in v2:
- Change commit subject line.
- Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and a config fragment for the changes.Signed-off-by Dario Binacchi <[email protected]>--- DEVELOPERS | 4 + .../imx8mn-bsh-smm-s2/linux.fragment | 0 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf | 4 + board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh | 23 ++++++ board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg | 17 +++++ board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh | 7 ++ board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh | 3 + board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt | 73 +++++++++++++++++++ configs/imx8mn_bsh_smm_s2_defconfig | 2 +- configs/imx8mn_bsh_smm_s2_pro_defconfig | 41 +++++++++++ 10 files changed, 173 insertions(+), 1 deletion(-)rename board/bsh/{ => common}/imx8mn-bsh-smm-s2/linux.fragment (100%) create mode 100644
board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.confcreate mode 100755board/bsh/imx8mn-bsh-smm-s2-pro/flash.shcreate mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg create mode 100755board/bsh/imx8mn-bsh-smm-s2-pro/post-build.shcreate mode 100755board/bsh/imx8mn-bsh-smm-s2-pro/post-image.shcreate mode 100644board/bsh/imx8mn-bsh-smm-s2-pro/readme.txtcreate mode 100644 configs/imx8mn_bsh_smm_s2_pro_defconfigDEVELOPERS +4
-0@@ -215,6 +215,8 @@ F: configs/snps_archs38_haps_defconfig F: configs/snps_archs38_hsdk_defconfig N: Ariel D'Alessandro <[email protected]> +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/axfsutils/ F: package/mali-t76x/@@ -659,6 +661,7 @@ F: package/xinetd/ N: Dario Binacchi <[email protected]> F: board/bsh/ F: configs/imx8mn_bsh_smm_s2_defconfig +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/uuu/ N: Dario Binacchi <[email protected]>@@ -2049,6 +2052,7 @@ F: package/python-pyzmq/ N: Michael Trimarchi <[email protected]> F: board/bsh/ F: configs/imx8mn_bsh_smm_s2_defconfig +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/python-spidev/ N: Michael Vetter <[email protected]>board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment renamed from board/bsh/imx8mn-bsh-smm-s2/linux.fragment +0
-0board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf new file +4
-0@@ -0,0 +1,4 @@ +label buildroot + kernel /boot/Image + devicetree /boot/freescale/imx8mn-bsh-smm-s2pro.dtb + append root=PARTUUID=%PARTUUID% rootwait rwboard/bsh/imx8mn-bsh-smm-s2-pro/flash.sh new file +23
-0@@ -0,0 +1,23 @@ +#!/bin/bash + +if [ $# -eq 0 ]; then + OUTPUT_DIR=output +else + OUTPUT_DIR=$1 +fi + +if ! test -d "${OUTPUT_DIR}" ; then + echo "ERROR: no output directory specified." + echo "Usage: $0 OUTPUT_DIR" + echo "" + echo "Arguments:" + echo " OUTPUT_DIR The Buildroot output directory." + exit 1 +fi + +IMAGES_DIR=${OUTPUT_DIR}/images + +${OUTPUT_DIR}/host/bin/uuu -v -b emmc_all \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/sdcard.img +board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg new file +17
-0@@ -0,0 +1,17 @@ +image sdcard.img { + hdimage { + partition-table-type = "gpt" + } + + partition imx-boot { + in-partition-table = "no" + image = "flash.bin" + offset = 33K + } + + partition rootfs { + offset = 8M + image = "rootfs.ext4" + partition-uuid = %PARTUUID% + } +}board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh new file +7
-0@@ -0,0 +1,7 @@ +#!/bin/sh +BOARD_DIR="$(dirname $0)" +PARTUUID="$($HOST_DIR/bin/uuidgen)" + +install -d "$TARGET_DIR/boot/extlinux/" +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf" +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh new file +3
-0@@ -0,0 +1,3 @@ +#!/bin/sh + +support/scripts/genimage.sh -c ${BINARIES_DIR}/genimage.cfgboard/bsh/imx8mn-bsh-smm-s2-pro/readme.txt new file +73
-0@@ -0,0 +1,73 @@ +i.MX8MN BSH SMM S2 PRO +====================== + +How to build it +--------------- + +Configure buildroot: + + $ make imx8mn_bsh_smm_s2_pro_defconfig + +Change settings to fit your needs (optional): + + $ make menuconfig + +Compile everything and build the rootfs image: + + $ make + + +Result of the build +------------------- + +After building, the output/images directory contains: + + output/images/ + ├── bl31.bin + ├── Image + ├── flash.bin + ├── ddr3* + ├── rootfs.ext2 + ├── rootfs.ext4 -> rootfs.ext2 + ├── rootfs.tar + ├── sdcard.img + ├── u-boot.bin + ├── u-boot-nodtb.bin + └── u-boot-spl.bin + + +Preparing the board +------------------- + +Plug the USB type A to micro B cable into the USB Debug +Connector (DBG UART). Use serial port settings 115200 8N1 +to access the debug console. + +Plug another USB type A to micro B cable into the USB-OTG +Connector (USB1). This connection is used to flash the board +firmware using the Freescale/NXP UUU tool. + +Connect the power supply/adaptor to the DC Power Jack (labelled ++5V). + + +Flashing the emmc card image +---------------------------- + +Power up the board by switching on the Power ON Switch, which is +placed right next to the DC Jack. + +Enter the following U-Boot commands on the debug serial console: + + $ fastboot usb 0 + +Flash the images on eMMC. On your computer, run: + + $ board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh output/ + + +Booting the board +----------------- + +By default the bootloader will search for the first valid image, +starting with the internal eMMC.configs/imx8mn_bsh_smm_s2_defconfig +1
-1@@ -6,7 +6,7 @@ BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2" BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=yconfigs/imx8mn_bsh_smm_s2_pro_defconfig new file +0
-0
configs/imx8mn_bsh_smm_s2_pro_defconfig line 7
Quoted 7 lines
configs/imx8mn_bsh_smm_s2_pro_defconfig new file +7
-0@@ -0,0 +1,41 @@ +BR2_aarch64=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18"
I've already give my Reviewed-by but I would update to latest stable Linux version here ^^^.
Quoted 24 lines
configs/imx8mn_bsh_smm_s2_pro_defconfig new file +24
-0+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2pro" +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_PACKAGE_FIRMWARE_IMX_DDR3=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2pro"
configs/imx8mn_bsh_smm_s2_pro_defconfig line 41
Quoted 10 lines
configs/imx8mn_bsh_smm_s2_pro_defconfig new file +10
-0+BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin" +BR2_TARGET_UBOOT_SPL=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_UUU=y
All the rest looks good to me and can be committed.
Best regards
Signature · 6 lines
Giulio Benetti Benetti Engineering sas _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v3 2/2] configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig
Hi Giulio,
Quoted 284 lines · Giulio Benetti
Hi Dario, Michael, Ariel, All,
Quoted 280 lines · Dario Binacchi
From: Michael Trimarchi <[email protected]>
BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which provide input and output interfaces to a dedicated carrier board. It is designed mainly to provide graphical/video and connectivity interfaces to the appliance.
Board support package includes the following components:
- mainline Linux kernel 5.18
- mainline U-Boot 2022-07
- Default packages from buildroothttps://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work together on platform mainline
Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314Cc Ariel D'Alessandro <[email protected]>Cc Jagan Teki <[email protected]>Cc Heiko Thiery <[email protected]>Cc Giulio Benetti <[email protected]>Reviewed-by Giulio Benetti <[email protected]>Signed-off-by Michael Trimarchi <[email protected]>Tested-by Ariel D'Alessandro <[email protected]>Signed-off-by Dario Binacchi <[email protected]>---
Changes in v3:
- Update the commit description.
- Bump U-Boot to version 2022-07.Changes in v2:
- Change commit subject line.
- Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and a config fragment for the changes.Signed-off-by Dario Binacchi <[email protected]>--- DEVELOPERS | 4 + .../imx8mn-bsh-smm-s2/linux.fragment | 0 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf | 4 + board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh | 23 ++++++ board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg | 17 +++++ board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh | 7 ++ board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh | 3 + board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt | 73 +++++++++++++++++++ configs/imx8mn_bsh_smm_s2_defconfig | 2 +- configs/imx8mn_bsh_smm_s2_pro_defconfig | 41 +++++++++++ 10 files changed, 173 insertions(+), 1 deletion(-)rename board/bsh/{ => common}/imx8mn-bsh-smm-s2/linux.fragment (100%) create mode 100644
board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.confcreate mode 100755board/bsh/imx8mn-bsh-smm-s2-pro/flash.shcreate mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg create mode 100755board/bsh/imx8mn-bsh-smm-s2-pro/post-build.shcreate mode 100755board/bsh/imx8mn-bsh-smm-s2-pro/post-image.shcreate mode 100644board/bsh/imx8mn-bsh-smm-s2-pro/readme.txtcreate mode 100644 configs/imx8mn_bsh_smm_s2_pro_defconfigDEVELOPERS +4
-0@@ -215,6 +215,8 @@ F: configs/snps_archs38_haps_defconfig F: configs/snps_archs38_hsdk_defconfig N: Ariel D'Alessandro <[email protected]> +F: board/bsh/ +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/axfsutils/ F: package/mali-t76x/@@ -659,6 +661,7 @@ F: package/xinetd/ N: Dario Binacchi <[email protected]> F: board/bsh/ F: configs/imx8mn_bsh_smm_s2_defconfig +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/uuu/ N: Dario Binacchi <[email protected]>@@ -2049,6 +2052,7 @@ F: package/python-pyzmq/ N: Michael Trimarchi <[email protected]> F: board/bsh/ F: configs/imx8mn_bsh_smm_s2_defconfig +F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: package/python-spidev/ N: Michael Vetter <[email protected]>board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment renamed from board/bsh/imx8mn-bsh-smm-s2/linux.fragment +0
-0board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf new file +4
-0@@ -0,0 +1,4 @@ +label buildroot + kernel /boot/Image + devicetree /boot/freescale/imx8mn-bsh-smm-s2pro.dtb + append root=PARTUUID=%PARTUUID% rootwait rwboard/bsh/imx8mn-bsh-smm-s2-pro/flash.sh new file +23
-0@@ -0,0 +1,23 @@ +#!/bin/bash + +if [ $# -eq 0 ]; then + OUTPUT_DIR=output +else + OUTPUT_DIR=$1 +fi + +if ! test -d "${OUTPUT_DIR}" ; then + echo "ERROR: no output directory specified." + echo "Usage: $0 OUTPUT_DIR" + echo "" + echo "Arguments:" + echo " OUTPUT_DIR The Buildroot output directory." + exit 1 +fi + +IMAGES_DIR=${OUTPUT_DIR}/images + +${OUTPUT_DIR}/host/bin/uuu -v -b emmc_all \ + ${IMAGES_DIR}/flash.bin \ + ${IMAGES_DIR}/sdcard.img +board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg new file +17
-0@@ -0,0 +1,17 @@ +image sdcard.img { + hdimage { + partition-table-type = "gpt" + } + + partition imx-boot { + in-partition-table = "no" + image = "flash.bin" + offset = 33K + } + + partition rootfs { + offset = 8M + image = "rootfs.ext4" + partition-uuid = %PARTUUID% + } +}board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh new file +7
-0@@ -0,0 +1,7 @@ +#!/bin/sh +BOARD_DIR="$(dirname $0)" +PARTUUID="$($HOST_DIR/bin/uuidgen)" + +install -d "$TARGET_DIR/boot/extlinux/" +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf" +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh new file +3
-0@@ -0,0 +1,3 @@ +#!/bin/sh + +support/scripts/genimage.sh -c ${BINARIES_DIR}/genimage.cfgboard/bsh/imx8mn-bsh-smm-s2-pro/readme.txt new file +73
-0@@ -0,0 +1,73 @@ +i.MX8MN BSH SMM S2 PRO +====================== + +How to build it +--------------- + +Configure buildroot: + + $ make imx8mn_bsh_smm_s2_pro_defconfig + +Change settings to fit your needs (optional): + + $ make menuconfig + +Compile everything and build the rootfs image: + + $ make + + +Result of the build +------------------- + +After building, the output/images directory contains: + + output/images/ + ├── bl31.bin + ├── Image + ├── flash.bin + ├── ddr3* + ├── rootfs.ext2 + ├── rootfs.ext4 -> rootfs.ext2 + ├── rootfs.tar + ├── sdcard.img + ├── u-boot.bin + ├── u-boot-nodtb.bin + └── u-boot-spl.bin + + +Preparing the board +------------------- + +Plug the USB type A to micro B cable into the USB Debug +Connector (DBG UART). Use serial port settings 115200 8N1 +to access the debug console. + +Plug another USB type A to micro B cable into the USB-OTG +Connector (USB1). This connection is used to flash the board +firmware using the Freescale/NXP UUU tool. + +Connect the power supply/adaptor to the DC Power Jack (labelled ++5V). + + +Flashing the emmc card image +---------------------------- + +Power up the board by switching on the Power ON Switch, which is +placed right next to the DC Jack. + +Enter the following U-Boot commands on the debug serial console: + + $ fastboot usb 0 + +Flash the images on eMMC. On your computer, run: + + $ board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh output/ + + +Booting the board +----------------- + +By default the bootloader will search for the first valid image, +starting with the internal eMMC.configs/imx8mn_bsh_smm_s2_defconfig +1
-1@@ -6,7 +6,7 @@ BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2" BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=yconfigs/imx8mn_bsh_smm_s2_pro_defconfig new file +2
-0@@ -0,0 +1,41 @@ +BR2_aarch64=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
Quoted 8 lines
configs/imx8mn_bsh_smm_s2_pro_defconfig line 7
Quoted 5 lines
configs/imx8mn_bsh_smm_s2_pro_defconfig new file +5
-0+BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18"I've already give my Reviewed-by but I would update to latest stable Linux version here ^^^.
Ok, I will update to version 5.18.19
Thanks and regards,
Dario
Quoted 42 lines
Quoted 25 lines
configs/imx8mn_bsh_smm_s2_pro_defconfig new file +24
-0+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2pro" +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_PACKAGE_FIRMWARE_IMX_DDR3=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2pro"configs/imx8mn_bsh_smm_s2_pro_defconfig line 41
Quoted 10 lines
configs/imx8mn_bsh_smm_s2_pro_defconfig new file +10
-0+BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin" +BR2_TARGET_UBOOT_SPL=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_UUU=yAll the rest looks good to me and can be committed.
Best regards
--
Giulio Benetti
Benetti Engineering sas
Signature · 21 lines
Dario Binacchi Embedded Linux Developer [email protected] __________________________________ Amarula Solutions SRL Via Le Canevare 30, 31100 Treviso, Veneto, IT T. +39 042 243 5310 [email protected] www.amarulasolutions.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot