ASoC: ops: Fix off by one in range control validation
Sasha Levin
maintainerPATCH 1/5 ASoC: ops: Fix off by one in range control validation
From: Mark Brown <[email protected]>
[ Upstream commit 5871321fb4558c55bf9567052b618ff0be6b975e ]
We currently report that range controls accept a range of 0..(max-min) but accept writes in the range 0..(max-min+1). Remove that extra +1.
--- sound/soc/soc-ops.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/soc-ops.c +2 -2
@@ -535,7 +535,7 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,return -EINVAL ;if (mc->platform_max && tmp > mc->platform_max)return -EINVAL ; -if (tmp > mc->max - mc->min +1 ) +if (tmp > mc->max - mc->min)return -EINVAL ;if (invert)
@@ -556,7 +556,7 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,return -EINVAL ;if (mc->platform_max && tmp > mc->platform_max)return -EINVAL ; -if (tmp > mc->max - mc->min +1 ) +if (tmp > mc->max - mc->min)return -EINVAL ;if (invert)
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 2/5 ASoC: wm5110: Fix DRE control
From: Charles Keepax <[email protected]>
[ Upstream commit 0bc0ae9a5938d512fd5d44f11c9c04892dcf4961 ]
The DRE controls on wm5110 should return a value of 1 if the DRE state is actually changed, update to fix this.
--- sound/soc/codecs/wm5110.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
sound/soc/codecs/wm5110.c +6 -2
@@ -406,6 +406,7 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol,unsigned int rnew = (!!ucontrol->value.integer.value[1 ]) << mc->rshift;unsigned int lold, rold;unsigned int lena, rena; +bool change = false;int ret;snd_soc_dapm_mutex_lock (dapm);
@@ -433,8 +434,8 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol, goto err; } - ret =regmap_update_bits (arizona->regmap,ARIZONA_DRE_ENABLE , - mask, lnew | rnew); + ret =regmap_update_bits_check (arizona->regmap,ARIZONA_DRE_ENABLE , + mask, lnew | rnew, &change);if (ret) {dev_err (arizona->dev,"Failed to set DRE: %d\n" , ret); goto err;
@@ -447,6 +448,9 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol,if (!rnew && rold)wm5110_clear_pga_volume (arizona, mc->rshift); +if (change) + ret =1 ; + err:snd_soc_dapm_mutex_unlock (dapm);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 3/5 irqchip: or1k-pic: Undefine mask_ack for level triggered hardware
In reply to Sasha LevinFrom: Stafford Horne <[email protected]>
[ Upstream commit 8520501346ed8d1c4a6dfa751cb57328a9c843f1 ]
The mask_ack operation clears the interrupt by writing to the PICSR register. This we don't want for level triggered interrupt because it does not actually clear the interrupt on the source hardware.
This was causing issues in qemu with multi core setups where interrupts would continue to fire even though they had been cleared in PICSR.
Just remove the mask_ack operation.
--- drivers/irqchip/irq-or1k-pic.c | 1 - 1 file changed, 1 deletion(-)
drivers/irqchip/irq-or1k-pic.c +0 -1
@@ -70,7 +70,6 @@ static struct or1k_pic_dev or1k_pic_level = { .name = "or1k-PIC-level", .irq_unmask = or1k_pic_unmask, .irq_mask = or1k_pic_mask, - .irq_mask_ack = or1k_pic_mask_ack, }, .handle = handle_level_irq, .flags = IRQ_LEVEL | IRQ_NOPROBE,
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 4/5 x86: Clear .brk area at early boot
In reply to Sasha LevinFrom: Juergen Gross <[email protected]>
[ Upstream commit 38fa5479b41376dc9d7f57e71c83514285a25ca0 ]
The .brk section has the same properties as .bss: it is an alloc-only section and should be cleared before being used.
Not doing so is especially a problem for Xen PV guests, as the hypervisor will validate page tables (check for writable page tables and hypervisor private bits) before accepting them to be used.
Make sure .brk is initially zero by letting clear_bss() clear the brk area, too.
--- arch/x86/kernel/head64.c | 2 ++ 1 file changed, 2 insertions(+)
arch/x86/kernel/head64.c +2 -0
@@ -292,6 +292,8 @@ static void __init clear_bss(void) {memset (__bss_start,0 , (unsigned long ) __bss_stop - (unsigned long ) __bss_start); +memset (__brk_base,0 , + (unsigned long ) __brk_limit - (unsigned long ) __brk_base); }static unsigned long get_cmd_line_ptr (void )
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 5/5 signal handling: don't use BUG_ON() for debugging
In reply to Sasha LevinFrom: Linus Torvalds <[email protected]>
[ Upstream commit a382f8fee42ca10c9bfce0d2352d4153f931f5dc ]
These are indeed "should not happen" situations, but it turns out recent changes made the 'task_is_stopped_or_trace()' case trigger (fix for that exists, is pending more testing), and the BUG_ON() makes it unnecessarily hard to actually debug for no good reason.
It's been that way for a long time, but let's make it clear: BUG_ON() is not good for debugging, and should never be used in situations where you could just say "this shouldn't happen, but we can continue".
Use WARN_ON_ONCE() instead to make sure it gets logged, and then just continue running. Instead of making the system basically unusuable because you crashed the machine while potentially holding some very core locks (eg this function is commonly called while holding 'tasklist_lock' for writing).
--- kernel/signal.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
kernel/signal.c +4 -4
@@ -1662,12 +1662,12 @@ bool do_notify_parent(struct task_struct *tsk, int sig)bool autoreap = false;u64 utime, stime; -BUG_ON (sig ==-1 ); +WARN_ON_ONCE (sig ==-1 ); -/* do_notify_parent_cldstop should have been called instead. */ -BUG_ON (task_is_stopped_or_traced (tsk)); +/* do_notify_parent_cldstop should have been called instead. */ +WARN_ON_ONCE (task_is_stopped_or_traced (tsk)); -BUG_ON (!tsk->ptrace && +WARN_ON_ONCE (!tsk->ptrace && (tsk->group_leader != tsk || !thread_group_empty (tsk)));if (sig !=SIGCHLD ) {
Signature · 1 line
2.35.1