OpenRISC support for virt platform with PCI
Stafford Horne
maintainerv2 cover OpenRISC support for virt platform with PCI
Hello,
This is a set of kernel patches which I have been using to support the new QEMU virt platform [1]. The virt platform supports PCI hence I have a patch here to add PCI support to OpenRISC.
A defconfig is also included which turns on drivers supported devices include virt network cards and the goldfish RTC.
[1] https://github.com/stffrdhrn/qemu/tree/or1k-virt-3
Changes since v1:
- Remove PIO support as suggest by Arnd
Stafford Horne (2):
openrisc: Add pci bus support
openrisc: Add virt defconfig
arch/openrisc/Kconfig | 7 +- arch/openrisc/configs/virt_defconfig | 108 +++++++++++++++++++++++++++ arch/openrisc/include/asm/Kbuild | 1 + arch/openrisc/include/asm/io.h | 2 +- arch/openrisc/include/asm/pci.h | 36 +++++++++ 5 files changed, 150 insertions(+), 4 deletions(-) create mode 100644 arch/openrisc/configs/virt_defconfig create mode 100644 arch/openrisc/include/asm/pci.h
Signature · 1 line
2.36.1
Stafford Horne
maintainerPATCH v2 1/2 openrisc: Add pci bus support
This patch adds required definitions to allow for PCI buses on OpenRISC. This is being in the QEMU virt platform.
OpenRISC does not have IO ports so this defines PCI IO to be allowed in any range. Keeping PIO_RESERVED defined as 0 allows OpenRISC to use MMIO for all IO.
Also, since commit 66bcd06099bb ("parport_pc: Also enable driver for PCI systems") all platforms that support PCI also need to support parallel port. We add a generic header to support parallel port drivers.
---
Since v1:
- Revert definition of IO_SPACE_LIMIT
arch/openrisc/Kconfig | 7 ++++--- arch/openrisc/include/asm/Kbuild | 1 + arch/openrisc/include/asm/io.h | 2 +- arch/openrisc/include/asm/pci.h | 36 ++++++++++++++++++++++++++++++++ 4 files changed, 42 insertions(+), 4 deletions(-) create mode 100644 arch/openrisc/include/asm/pci.h
arch/openrisc/Kconfig +4 -3
@@ -21,7 +21,9 @@ config OPENRISC select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select GENERIC_IOMAP + select GENERIC_PCI_IOMAP select GENERIC_CPU_DEVICES + select HAVE_PCI select HAVE_UID16 select GENERIC_ATOMIC64 select GENERIC_CLOCKEVENTS_BROADCAST
@@ -32,6 +34,8 @@ config OPENRISC select CPU_NO_EFFICIENT_FFS if !OPENRISC_HAVE_INST_FF1 select ARCH_USE_QUEUED_RWLOCKS select OMPIC if SMP + select PCI_DOMAINS_GENERIC if PCI + select PCI_MSI if PCI select ARCH_WANT_FRAME_POINTERS select GENERIC_IRQ_MULTI_HANDLER select MMU_GATHER_NO_RANGE if MMU
@@ -46,9 +50,6 @@ config MMU config GENERIC_HWEIGHT def_bool y -config NO_IOPORT_MAP - def_bool y - # For now, use generic checksum functions #These can be reimplemented in assembly later if so inclined config GENERIC_CSUM
arch/openrisc/include/asm/Kbuild +1 -0
@@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 generic-y += extable.h generic-y += kvm_para.h +generic-y += parport.h generic-y += spinlock_types.h generic-y += spinlock.h generic-y += qrwlock_types.h
arch/openrisc/include/asm/io.h +1 -1
@@ -17,7 +17,7 @@#include <linux/types.h> /* -* PCI: can we really do 0 here if we have no port IO? +* PCI: We do not use IO ports in OpenRISC */ #define IO_SPACE_LIMIT 0
arch/openrisc/include/asm/pci.h new file +36 -0
@@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __ASM_OPENRISC_PCI_H +#define __ASM_OPENRISC_PCI_H + +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> + +#include <asm/io.h> + +#define PCIBIOS_MIN_IO 0 +#define PCIBIOS_MIN_MEM 0 + +/* OpenRISC bootloaders do not initialize PCI bus */ +#define pcibios_assign_all_busses () 1 + +#define ARCH_GENERIC_PCI_MMAP_RESOURCE 1 + +extern int isa_dma_bridge_buggy; + +#ifdef CONFIG_PCI +static inline int pci_get_legacy_ide_irq (struct pci_dev *dev,int channel) +{ +/* no legacy IRQs on or1k */ +return -ENODEV ; +} + +static inline int pci_proc_domain (struct pci_bus *bus) +{ +/* always show the domain in /proc */ +return 1 ; +} +#endif /* CONFIG_PCI */ + +#endif /* __ASM_OPENRISC_PCI_H */
Signature · 1 line
2.36.1
Re: [PATCH v2 1/2] openrisc: Add pci bus support
Quoted 7 lines · Stafford Horne
This patch adds required definitions to allow for PCI buses on OpenRISC. This is being in the QEMU virt platform.
OpenRISC does not have IO ports so this defines PCI IO to be allowed in any range. Keeping
PIO_RESERVEDdefined as 0 allows OpenRISC to use MMIO for all IO.
Ok, this looks better.
Quoted 3 lines
Also, since commit
66bcd06099bb("parport_pc: Also enable driver for PCI systems") all platforms that support PCI also need to support parallel port. We add a generic header to support parallel port drivers.
The parport_pc driver is actually one of the things that doesn't work without I/O ports, so at least the description here is misleading. We should really have Kconfig logic to enforce this, but that is a separate topic.
Quoted 12 lines
arch/openrisc/Kconfig +1
-0@@ -21,7 +21,9 @@ config OPENRISC select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select GENERIC_IOMAP + select GENERIC_PCI_IOMAP select GENERIC_CPU_DEVICES
arch/openrisc/Kconfig config MMU · line 51
Quoted 6 lines
arch/openrisc/Kconfig +0
-3@@ -46,9 +50,6 @@ config MMU config GENERIC_HWEIGHT def_bool y -config NO_IOPORT_MAP - def_bool y -
GENERIC_IOMAP makes no sense without PIO, and I think you also need to keep the NO_IOPORT_MAP. I think you still want GENERIC_PCI_IOMAP, which in the absence of the other two should turn just return an __iomem pointer for memory resource and NULL for i/o resources.
arch/openrisc/Kconfig config MMU
Quoted 5 lines
arch/openrisc/Kconfig +5
-0+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + /* no legacy IRQs on or1k */ + return -ENODEV; +}
The comment seems misleading, as "legacy IRQs" normally refers to non-MSI interrupts, which you do support. It's only the legacy IDE interrupts that are not supported.
I see that the asm-generic/pci.h file is now completely useless, as it only has a single function left in it, and this one is wrong on most architectures -- it only works when you have PC-style interrupt numbers. Out of the five architectures that include asm-generic/pci.h (m68k, s390, sparc, x86, xtensa), I would expect only x86 to use this version, and maybe a few sparc machines.
Can I ask you to move out the existing asm-generic/pci.h code into those architectures, and add a new file in its place that you can use as-is on openrisc? Ideally we should be able to also remove most of the contents of asm/pci.h on arm64 and riscv. If you have conflicting settings, the normal way to handle them in asm-generic headers is like
#ifndef PCIBIOS_MIN_IO
#define PCIBIOS_MIN_IO 0
#endif
#ifndef pcibios_assign_all_busses
#define pcibios_assign_all_busses() 1
#endif
Arnd
Stafford Horne
maintainerRe: [PATCH v2 1/2] openrisc: Add pci bus support
Quoted 11 lines · Arnd Bergmann
Quoted 7 lines · Stafford Horne
This patch adds required definitions to allow for PCI buses on OpenRISC. This is being in the QEMU virt platform.
OpenRISC does not have IO ports so this defines PCI IO to be allowed in any range. Keeping
PIO_RESERVEDdefined as 0 allows OpenRISC to use MMIO for all IO.Ok, this looks better.
Quoted 7 lines
Quoted 3 lines
Also, since commit
66bcd06099bb("parport_pc: Also enable driver for PCI systems") all platforms that support PCI also need to support parallel port. We add a generic header to support parallel port drivers.The
parport_pcdriver is actually one of the things that doesn't work without I/O ports, so at least the description here is misleading. We should really haveKconfiglogic to enforce this, but that is a separate topic.
OK, let me try to fix up this comment in v3.
Quoted 11 lines
Quoted 10 lines
arch/openrisc/Kconfig +1
-0@@ -21,7 +21,9 @@ config OPENRISC select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select GENERIC_IOMAP + select GENERIC_PCI_IOMAP select GENERIC_CPU_DEVICES
Quoted 7 lines
arch/openrisc/Kconfig config MMU · line 51
Quoted 7 lines
arch/openrisc/Kconfig +0
-3@@ -46,9 +50,6 @@ config MMU config GENERIC_HWEIGHT def_bool y -config NO_IOPORT_MAP - def_bool y -
I tried the below patch on top of this but I get failures, as the __pci_ioport_map uses ioport_map.
lib/pci_iomap.c: In function 'pci_iomap_range':
CC drivers/i2c/i2c-core-base.o
./include/asm-generic/pci_iomap.h:29:41: error: implicit declaration of function 'ioport_map'; did you mean 'ioremap'? [-Werror=implicit-function-declaration]
29 | #define __pci_ioport_map(dev, port, nr) ioport_map((port), (nr))
| ^~~~~~~~~~
lib/pci_iomap.c:44:24: note: in expansion of macro '__pci_ioport_map'
44 | return __pci_ioport_map(dev, start, len);
| ^~~~~~~~~~~~~~~~
arch/openrisc/Kconfig +3 -1
@@ -20,7 +20,6 @@ config OPENRISC select GENERIC_IRQ_CHIP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW - select GENERIC_IOMAP select GENERIC_PCI_IOMAP select GENERIC_CPU_DEVICES select HAVE_PCI
@@ -50,6 +49,9 @@ config MMU config GENERIC_HWEIGHT def_bool y +config NO_IOPORT_MAP + def_bool y + # For now, use generic checksum functions #These can be reimplemented in assembly later if so inclined config GENERIC_CSUM
Quoted 5 lines
GENERIC_IOMAPmakes no sense without PIO, and I think you also need to keep theNO_IOPORT_MAP. I think you still wantGENERIC_PCI_IOMAP, which in the absence of the other two should turn just return an__iomempointer for memory resource and NULL for i/o resources.
OK.
If we keep NO_IOPORT_MAP, it causes HAS_IOPORT_MAP to be false and it removes the definition of ioport_map which still seems to be needed at link time. Maybe thats an issue though.
Quoted 9 lines
arch/openrisc/Kconfig config MMU
Quoted 5 lines
arch/openrisc/Kconfig +5
-0+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + /* no legacy IRQs on or1k */ + return -ENODEV; +}The comment seems misleading, as "legacy IRQs" normally refers to non-MSI interrupts, which you do support. It's only the legacy IDE interrupts that are not supported.
OK, I might have copied this from another architecture. I will check if those comments should be updated too.
Quoted 8 lines
I see that the
asm-generic/pci.hfile is now completely useless, as it only has a single function left in it, and this one is wrong on most architectures -- it only works when you have PC-style interrupt numbers. Out of the five architectures that includeasm-generic/pci.h(m68k, s390, sparc, x86, xtensa), I would expect only x86 to use this version, and maybe a few sparc machines.
Quoted 6 lines
Can I ask you to move out the existing
asm-generic/pci.hcode into those architectures, and add a new file in its place that you can use as-is on openrisc? Ideally we should be able to also remove most of the contents ofasm/pci.hon arm64 and riscv. If you have conflicting settings, the normal way to handle them in asm-generic headers is like
Yeah, that sounds like a good plan,
Quoted 7 lines
#ifndef
PCIBIOS_MIN_IO
#definePCIBIOS_MIN_IO0
#endif#ifndef
pcibios_assign_all_busses
#definepcibios_assign_all_busses()1
#endif
OK.
-Stafford
Re: [PATCH v2 1/2] openrisc: Add pci bus support
Quoted 23 lines · Stafford Horne
Quoted 11 lines · Arnd Bergmann
Quoted 10 lines
arch/openrisc/Kconfig +1
-0@@ -21,7 +21,9 @@ config OPENRISC select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select GENERIC_IOMAP + select GENERIC_PCI_IOMAP select GENERIC_CPU_DEVICESQuoted 7 lines
arch/openrisc/Kconfig config MMU · line 51
Quoted 7 lines
arch/openrisc/Kconfig +0
-3@@ -46,9 +50,6 @@ config MMU config GENERIC_HWEIGHT def_bool y -config NO_IOPORT_MAP - def_bool y -I tried the below patch on top of this but I get failures, as the
__pci_ioport_mapusesioport_map.
Quoted 9 lines
lib/pci_iomap.c: In function 'pci_iomap_range':
CCdrivers/i2c/i2c-core-base.o
./include/asm-generic/pci_iomap.h:29:41: error: implicit declaration of function 'ioport_map'; did you mean 'ioremap'? [-Werror=implicit-function-declaration]
29 | #define__pci_ioport_map(dev, port, nr)ioport_map((port), (nr))
| ^~~~~~~~~~
lib/pci_iomap.c:44:24: note: in expansion of macro '__pci_ioport_map'
44 | return__pci_ioport_map(dev, start, len);
| ^~~~~~~~~~~~~~~~
Ah, I see. So setting NO_IOPORT_MAP without GENERIC_PCI_IOMAP probably just works, but then you'd also build all the driver that use ioport_map() when they cannot work.
Maybe add another
#define __pci_ioport_map(dev, port, nr) NULL
case to include/asm-generic/pci_iomap.h, or add an #ifdef to lib pci_iomap_range() to not call it in this case.
Quoted 11 lines
Quoted 5 lines
GENERIC_IOMAPmakes no sense without PIO, and I think you also need to keep theNO_IOPORT_MAP. I think you still wantGENERIC_PCI_IOMAP, which in the absence of the other two should turn just return an__iomempointer for memory resource and NULL for i/o resources.OK.
If we keep
NO_IOPORT_MAP, it causesHAS_IOPORT_MAPto be false and it removes the definition ofioport_mapwhich still seems to be needed at link time. Maybe thats an issue though.
This is the intention of CONFIG_NO_IOPORT_MAP, it's meant to be set on architectures that have no way of defining ioport_map() in a sensible way.
Arnd
Stafford Horne
maintainerPATCH v2 2/2 openrisc: Add virt defconfig
In reply to Stafford HorneI have been developing a new qemu virt platform to help with more efficient toolchain and kernel testing [1].
This patch adds the defconfig which is needed to support booting linux on the platform.
--- arch/openrisc/configs/virt_defconfig | 108 +++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) create mode 100644 arch/openrisc/configs/virt_defconfig
arch/openrisc/configs/virt_defconfig new file +108 -0
@@ -0,0 +1,108 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ_IDLE=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_OPENRISC_HAVE_INST_CMOV=y +CONFIG_OPENRISC_HAVE_INST_ROR=y +CONFIG_OPENRISC_HAVE_INST_RORI=y +CONFIG_OPENRISC_HAVE_INST_SEXT=y +CONFIG_NR_CPUS=8 +CONFIG_SMP=y +CONFIG_HZ_100=y +# CONFIG_OPENRISC_NO_SPR_SR_DSX is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set +# CONFIG_TCP_CONG_CUBIC is not set +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_HOST_GENERIC=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NBD=y +CONFIG_VIRTIO_BLK=y +CONFIG_NETDEVICES=y +CONFIG_VIRTIO_NET=y +CONFIG_ETHOC=y +CONFIG_MICREL_PHY=y +# CONFIG_WLAN is not set +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_VIRTIO_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_SYSCON=y +CONFIG_POWER_RESET_SYSCON_POWEROFF=y +CONFIG_SYSCON_REBOOT_MODE=y +# CONFIG_HWMON is not set +CONFIG_DRM=y +# CONFIG_DRM_FBDEV_EMULATION is not set +CONFIG_DRM_VIRTIO_GPU=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_INTEL8X0=y +CONFIG_SND_INTEL8X0M=y +CONFIG_SND_SOC=y +CONFIG_SND_VIRTIO=y +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_ITE is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_REDRAGON is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PLATFORM=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_SERIAL=y +CONFIG_USB_GADGET=y +CONFIG_TYPEC=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GOLDFISH=y +CONFIG_VIRT_DRIVERS=y +CONFIG_VIRTIO_PCI=y +# CONFIG_VIRTIO_PCI_LEGACY is not set +CONFIG_VIRTIO_INPUT=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +# CONFIG_DNOTIFY is not set +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_EXFAT_FS=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_UNICODE=y +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_FTRACE=y
Signature · 1 line
2.36.1