rockchip: rk3308: fix same-as-spl boot order
Subsystems (3)
PATCH 1/1 rockchip: rk3308: fix same-as-spl boot order
Rockchip SoCs need the boot_devices array defined in order to map the bootloader's value to a U-Boot device. Implement this for rk3308.
Signed-off-by John Keeping <[email protected]>
--- arch/arm/mach-rockchip/rk3308/rk3308.c | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm/mach-rockchip/rk3308/rk3308.c +6 -0
@@ -8,6 +8,7 @@#include <asm/global_data.h> #include <asm/io.h> #include <asm/arch/grf_rk3308.h> +#include <asm/arch-rockchip/bootrom.h> #include <asm/arch-rockchip/hardware.h> #include <asm/gpio.h> #include <debug_uart.h>
@@ -142,6 +143,11 @@ enum {#define GPIO0_A4 4 +const char *const boot_devices[BROM_LAST_BOOTSOURCE +1 ] = { + [BROM_BOOTSOURCE_EMMC ] ="/mmc@ff490000" , + [BROM_BOOTSOURCE_SD ] ="/mmc@ff480000" , +}; +int rk_board_init (void ) {static struct rk3308_grf *const grf = (void *)GRF_BASE ;
Signature · 1 line
2.37.1
Quoted 5 lines · John Keeping
Rockchip SoCs need the
boot_devicesarray defined in order to map the bootloader's value to a U-Boot device. Implement this for rk3308.Signed-off-by John Keeping <[email protected]>
Reviewed-by Philipp Tomsich <[email protected]>
Quoted 4 lines · John Keeping
Rockchip SoCs need the
boot_devicesarray defined in order to map the bootloader's value to a U-Boot device. Implement this for rk3308.Signed-off-by John Keeping <[email protected]>
Reviewed-by Kever Yang <[email protected]>
Thanks,
- Kever
Quoted 28 lines
--- arch/arm/mach-rockchip/rk3308/rk3308.c | 6 ++++++ 1 file changed, 6 insertions(+)arch/arm/mach-rockchip/rk3308/rk3308.c +6
-0@@ -8,6 +8,7 @@#include <asm/global_data.h> #include <asm/io.h> #include <asm/arch/grf_rk3308.h> +#include <asm/arch-rockchip/bootrom.h> #include <asm/arch-rockchip/hardware.h> #include <asm/gpio.h> #include <debug_uart.h> @@ -142,6 +143,11 @@ enum {#define GPIO0_A4 4 +const char *const boot_devices[BROM_LAST_BOOTSOURCE +1 ] = { + [BROM_BOOTSOURCE_EMMC ] ="/mmc@ff490000" , + [BROM_BOOTSOURCE_SD ] ="/mmc@ff480000" , +}; +int rk_board_init (void ) {static struct rk3308_grf *const grf = (void *)GRF_BASE ;