arm: mvebu: Avoid reading MVEBU_REG_PCIE_DEVID register too many times
Subsystems (3)
PATCH 1/1 arm: mvebu: Avoid reading MVEBU_REG_PCIE_DEVID register too many times
Change detection of platform/cpu from runtime to compile time via config define. This completely eliminates compiling code which is not going to run on selected platform. Code which parses and prints device / revision id still reads device id from MVEBU_REG_PCIE_DEVID register, but only once.
--- arch/arm/mach-mvebu/cpu.c | 67 ++++++++++---------------- arch/arm/mach-mvebu/dram.c | 18 +++---- arch/arm/mach-mvebu/include/mach/cpu.h | 9 ---- 3 files changed, 32 insertions(+), 62 deletions(-)
arch/arm/mach-mvebu/cpu.c +26 -41
@@ -54,33 +54,6 @@ void reset_cpu(void) ; } -int mvebu_soc_family (void ) -{ -u16 devid = (readl (MVEBU_REG_PCIE_DEVID ) >>16 ) &0xffff ; - -switch (devid) { -case SOC_MV78230_ID : -case SOC_MV78260_ID : -case SOC_MV78460_ID : -return MVEBU_SOC_AXP ; - -case SOC_88F6720_ID : -return MVEBU_SOC_A375 ; - -case SOC_88F6810_ID : -case SOC_88F6820_ID : -case SOC_88F6828_ID : -return MVEBU_SOC_A38X ; - -case SOC_98DX3236_ID : -case SOC_98DX3336_ID : -case SOC_98DX4251_ID : -return MVEBU_SOC_MSYS ; - } - -return MVEBU_SOC_UNKNOWN ; -} -u32 get_boot_device (void ) {u32 val;
@@ -305,7 +278,10 @@ int print_cpuinfo(void)break ; } -if (mvebu_soc_family () ==MVEBU_SOC_AXP ) { +switch (devid) { +case SOC_MV78230_ID : +case SOC_MV78260_ID : +case SOC_MV78460_ID :switch (revid) {case 1 :puts ("A0" );
@@ -317,9 +293,9 @@ int print_cpuinfo(void)printf ("?? (%x)" , revid);break ; } - } +break ; -if (mvebu_soc_family () ==MVEBU_SOC_A375 ) { +case SOC_88F6720_ID :switch (revid) {case MV_88F67XX_A0_ID :puts ("A0" );
@@ -328,9 +304,11 @@ int print_cpuinfo(void)printf ("?? (%x)" , revid);break ; } - } +break ; -if (mvebu_soc_family () ==MVEBU_SOC_A38X ) { +case SOC_88F6810_ID : +case SOC_88F6820_ID : +case SOC_88F6828_ID :switch (revid) {case MV_88F68XX_Z1_ID :puts ("Z1" );
@@ -345,9 +323,11 @@ int print_cpuinfo(void)printf ("?? (%x)" , revid);break ; } - } +break ; -if (mvebu_soc_family () ==MVEBU_SOC_MSYS ) { +case SOC_98DX3236_ID : +case SOC_98DX3336_ID : +case SOC_98DX4251_ID :switch (revid) {case 3 :puts ("A0" );
@@ -359,6 +339,11 @@ int print_cpuinfo(void)printf ("?? (%x)" , revid);break ; } +break ; + +default : +printf ("?? (%x)" , revid); +break ; }get_sar_freq (&sar_freq);
@@ -463,7 +448,7 @@ int arch_cpu_init(void)struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE ; -if (mvebu_soc_family () ==MVEBU_SOC_A38X ) { +if (IS_ENABLED (CONFIG_ARMADA_38X )) {/* * To fully release / unlock this area from cache, we need * to flush all caches and disable the L2 cache.
@@ -492,7 +477,7 @@ int arch_cpu_init(void)*/ mvebu_mbus_probe (NULL ,0 ); -if (mvebu_soc_family () ==MVEBU_SOC_AXP ) { +if (IS_ENABLED (CONFIG_ARMADA_XP )) {/* * Now the SDRAM access windows can be reconfigured using * the information in the SDRAM scratch pad registers
@@ -506,7 +491,7 @@ int arch_cpu_init(void)*/ mvebu_mbus_probe (windows,ARRAY_SIZE (windows)); -if (mvebu_soc_family () ==MVEBU_SOC_AXP ) { +if (IS_ENABLED (CONFIG_ARMADA_XP )) {/* Enable GBE0, GBE1, LCD and NFC PUP */ clrsetbits_le32(ARMADA_XP_PUP_ENABLE, 0, GE0_PUP_EN | GE1_PUP_EN | LCD_PUP_EN |
@@ -530,9 +515,9 @@ u32 mvebu_get_nand_clock(void) {u32 reg; -if (mvebu_soc_family () ==MVEBU_SOC_A38X ) +if (IS_ENABLED (CONFIG_ARMADA_38X )) reg =MVEBU_DFX_DIV_CLK_CTRL (1 ); -else if (mvebu_soc_family () ==MVEBU_SOC_MSYS ) +else if (IS_ENABLED (CONFIG_ARMADA_MSYS )) reg =MVEBU_DFX_DIV_CLK_CTRL (8 );else reg =MVEBU_CORE_DIV_CLK_CTRL (1 );
@@ -678,7 +663,7 @@ void enable_caches(void)* ethernet driver (mvpp2). So lets keep the d-cache disabled * until this is solved. */ -if (mvebu_soc_family () !=MVEBU_SOC_A375 ) { +if (IS_ENABLED (CONFIG_ARMADA_375 )) {/* Enable D-cache. I-cache is already enabled in start.S */ dcache_enable (); }
@@ -686,7 +671,7 @@ void enable_caches(void)void v7_outer_cache_enable (void ) { -if (mvebu_soc_family () ==MVEBU_SOC_AXP ) { +if (IS_ENABLED (CONFIG_ARMADA_XP )) {struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE ;u32 u;
arch/arm/mach-mvebu/dram.c +6 -12
@@ -220,7 +220,7 @@ static int ecc_enabled(void)return 0 ; } -/* Return the width of the DRAM bus, or 0 for unknown. */ +/* Return the width of the DRAM bus. */ static int bus_width (void ) {int full_width =0 ;
@@ -228,17 +228,11 @@ static int bus_width(void)if (reg_read (REG_SDRAM_CONFIG_ADDR ) & (1 <<REG_SDRAM_CONFIG_WIDTH_OFFS )) full_width =1 ; -switch (mvebu_soc_family ()) { -case MVEBU_SOC_AXP : -return full_width ?64 :32 ; -break ; -case MVEBU_SOC_A375 : -case MVEBU_SOC_A38X : -case MVEBU_SOC_MSYS : -return full_width ?32 :16 ; -default : -return 0 ; - } +#ifdef CONFIG_ARMADA_XP +return full_width ?64 :32 ; +#else +return full_width ?32 :16 ; +#endif }static int cycle_mode (void )
arch/arm/mach-mvebu/include/mach/cpu.h +0 -9
@@ -61,14 +61,6 @@ enum cpu_attrib { CPU_ATTR_DEV_CS3 = 0x37, }; -enum { -MVEBU_SOC_AXP , -MVEBU_SOC_A375 , -MVEBU_SOC_A38X , -MVEBU_SOC_MSYS , -MVEBU_SOC_UNKNOWN , -}; -#define MVEBU_SDRAM_SIZE_MAX 0xc0000000/*
@@ -151,7 +143,6 @@ unsigned int mvebu_sdram_bar(enum memory_bank bank);unsigned int mvebu_sdram_bs (enum memory_bank bank);void mvebu_sdram_size_adjust (enum memory_bank bank);int mvebu_mbus_probe (struct mbus_win windows[],int count); -int mvebu_soc_family (void );u32 mvebu_get_nand_clock (void );void __noreturn return_to_bootrom (void );
Signature · 1 line
2.20.1
Quoted 6 lines · On Fri, 15 Jul 2022 10:13:12 +0200 Pali Rohár <[email protected]> wrote:
Change detection of platform/cpu from runtime to compile time via config define. This completely eliminates compiling code which is not going to run on selected platform. Code which parses and prints device / revision id still reads device id from
MVEBU_REG_PCIE_DEVIDregister, but only once.Signed-off-by Pali Rohár <[email protected]>
Quoted 6 lines · Pali Rohár
Change detection of platform/cpu from runtime to compile time via config define. This completely eliminates compiling code which is not going to run on selected platform. Code which parses and prints device / revision id still reads device id from
MVEBU_REG_PCIE_DEVIDregister, but only once.Signed-off-by Pali Rohár <[email protected]>
Thanks,
Stefan
Quoted 221 lines
--- arch/arm/mach-mvebu/cpu.c | 67 ++++++++++---------------- arch/arm/mach-mvebu/dram.c | 18 +++---- arch/arm/mach-mvebu/include/mach/cpu.h | 9 ---- 3 files changed, 32 insertions(+), 62 deletions(-)arch/arm/mach-mvebu/cpu.c +26
-41@@ -54,33 +54,6 @@ void reset_cpu(void) ; } -int mvebu_soc_family (void ) -{ -u16 devid = (readl (MVEBU_REG_PCIE_DEVID ) >>16 ) &0xffff ; - -switch (devid) { -case SOC_MV78230_ID : -case SOC_MV78260_ID : -case SOC_MV78460_ID : -return MVEBU_SOC_AXP ; - -case SOC_88F6720_ID : -return MVEBU_SOC_A375 ; - -case SOC_88F6810_ID : -case SOC_88F6820_ID : -case SOC_88F6828_ID : -return MVEBU_SOC_A38X ; - -case SOC_98DX3236_ID : -case SOC_98DX3336_ID : -case SOC_98DX4251_ID : -return MVEBU_SOC_MSYS ; - } - -return MVEBU_SOC_UNKNOWN ; -} -u32 get_boot_device (void ) {u32 val;@@ -305,7 +278,10 @@ int print_cpuinfo(void)break ; } -if (mvebu_soc_family () ==MVEBU_SOC_AXP ) { +switch (devid) { +case SOC_MV78230_ID : +case SOC_MV78260_ID : +case SOC_MV78460_ID :switch (revid) {case 1 :puts ("A0" );@@ -317,9 +293,9 @@ int print_cpuinfo(void)printf ("?? (%x)" , revid);break ; } - } +break ; -if (mvebu_soc_family () ==MVEBU_SOC_A375 ) { +case SOC_88F6720_ID :switch (revid) {case MV_88F67XX_A0_ID :puts ("A0" );@@ -328,9 +304,11 @@ int print_cpuinfo(void)printf ("?? (%x)" , revid);break ; } - } +break ; -if (mvebu_soc_family () ==MVEBU_SOC_A38X ) { +case SOC_88F6810_ID : +case SOC_88F6820_ID : +case SOC_88F6828_ID :switch (revid) {case MV_88F68XX_Z1_ID :puts ("Z1" );@@ -345,9 +323,11 @@ int print_cpuinfo(void)printf ("?? (%x)" , revid);break ; } - } +break ; -if (mvebu_soc_family () ==MVEBU_SOC_MSYS ) { +case SOC_98DX3236_ID : +case SOC_98DX3336_ID : +case SOC_98DX4251_ID :switch (revid) {case 3 :puts ("A0" );@@ -359,6 +339,11 @@ int print_cpuinfo(void)printf ("?? (%x)" , revid);break ; } +break ; + +default : +printf ("?? (%x)" , revid); +break ; }get_sar_freq (&sar_freq);@@ -463,7 +448,7 @@ int arch_cpu_init(void)struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE ; -if (mvebu_soc_family () ==MVEBU_SOC_A38X ) { +if (IS_ENABLED (CONFIG_ARMADA_38X )) {/* * To fully release / unlock this area from cache, we need * to flush all caches and disable the L2 cache. @@ -492,7 +477,7 @@ int arch_cpu_init(void)*/ mvebu_mbus_probe (NULL ,0 ); -if (mvebu_soc_family () ==MVEBU_SOC_AXP ) { +if (IS_ENABLED (CONFIG_ARMADA_XP )) {/* * Now the SDRAM access windows can be reconfigured using * the information in the SDRAM scratch pad registers @@ -506,7 +491,7 @@ int arch_cpu_init(void)*/ mvebu_mbus_probe (windows,ARRAY_SIZE (windows)); -if (mvebu_soc_family () ==MVEBU_SOC_AXP ) { +if (IS_ENABLED (CONFIG_ARMADA_XP )) {/* Enable GBE0, GBE1, LCD and NFC PUP */ clrsetbits_le32(ARMADA_XP_PUP_ENABLE, 0, GE0_PUP_EN | GE1_PUP_EN | LCD_PUP_EN |@@ -530,9 +515,9 @@ u32 mvebu_get_nand_clock(void) {u32 reg; -if (mvebu_soc_family () ==MVEBU_SOC_A38X ) +if (IS_ENABLED (CONFIG_ARMADA_38X )) reg =MVEBU_DFX_DIV_CLK_CTRL (1 ); -else if (mvebu_soc_family () ==MVEBU_SOC_MSYS ) +else if (IS_ENABLED (CONFIG_ARMADA_MSYS )) reg =MVEBU_DFX_DIV_CLK_CTRL (8 );else reg =MVEBU_CORE_DIV_CLK_CTRL (1 );@@ -678,7 +663,7 @@ void enable_caches(void)* ethernet driver (mvpp2). So lets keep the d-cache disabled * until this is solved. */ -if (mvebu_soc_family () !=MVEBU_SOC_A375 ) { +if (IS_ENABLED (CONFIG_ARMADA_375 )) {/* Enable D-cache. I-cache is already enabled in start.S */ dcache_enable (); }@@ -686,7 +671,7 @@ void enable_caches(void)void v7_outer_cache_enable (void ) { -if (mvebu_soc_family () ==MVEBU_SOC_AXP ) { +if (IS_ENABLED (CONFIG_ARMADA_XP )) {struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE ;u32 u;arch/arm/mach-mvebu/dram.c +6
-12@@ -220,7 +220,7 @@ static int ecc_enabled(void)return 0 ; } -/* Return the width of the DRAM bus, or 0 for unknown. */ +/* Return the width of the DRAM bus. */ static int bus_width (void ) {int full_width =0 ;@@ -228,17 +228,11 @@ static int bus_width(void)if (reg_read (REG_SDRAM_CONFIG_ADDR ) & (1 <<REG_SDRAM_CONFIG_WIDTH_OFFS )) full_width =1 ; -switch (mvebu_soc_family ()) { -case MVEBU_SOC_AXP : -return full_width ?64 :32 ; -break ; -case MVEBU_SOC_A375 : -case MVEBU_SOC_A38X : -case MVEBU_SOC_MSYS : -return full_width ?32 :16 ; -default : -return 0 ; - } +#ifdef CONFIG_ARMADA_XP +return full_width ?64 :32 ; +#else +return full_width ?32 :16 ; +#endif }static int cycle_mode (void )arch/arm/mach-mvebu/include/mach/cpu.h +0
-8@@ -61,14 +61,6 @@ enum cpu_attrib { CPU_ATTR_DEV_CS3 = 0x37, }; -enum { -MVEBU_SOC_AXP , -MVEBU_SOC_A375 , -MVEBU_SOC_A38X , -MVEBU_SOC_MSYS , -MVEBU_SOC_UNKNOWN , -}; -#define MVEBU_SDRAM_SIZE_MAX 0xc0000000/*
arch/arm/mach-mvebu/include/mach/cpu.h unsigned int mvebu_sdram_bar(enum memory_bank bank); · line 148
Quoted 7 lines
arch/arm/mach-mvebu/include/mach/cpu.h +0
-1@@ -151,7 +143,6 @@ unsigned int mvebu_sdram_bar(enum memory_bank bank);unsigned int mvebu_sdram_bs (enum memory_bank bank);void mvebu_sdram_size_adjust (enum memory_bank bank);int mvebu_mbus_probe (struct mbus_win windows[],int count); -int mvebu_soc_family (void );u32 mvebu_get_nand_clock (void );void __noreturn return_to_bootrom (void );
Viele Grüße,
Stefan Roese
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
Quoted 6 lines · Pali Rohár
Change detection of platform/cpu from runtime to compile time via config define. This completely eliminates compiling code which is not going to run on selected platform. Code which parses and prints device / revision id still reads device id from
MVEBU_REG_PCIE_DEVIDregister, but only once.Signed-off-by Pali Rohár <[email protected]>
Applied to u-boot-marvell/master
Thanks,
Stefan
Quoted 221 lines
--- arch/arm/mach-mvebu/cpu.c | 67 ++++++++++---------------- arch/arm/mach-mvebu/dram.c | 18 +++---- arch/arm/mach-mvebu/include/mach/cpu.h | 9 ---- 3 files changed, 32 insertions(+), 62 deletions(-)arch/arm/mach-mvebu/cpu.c +26
-41@@ -54,33 +54,6 @@ void reset_cpu(void) ; } -int mvebu_soc_family (void ) -{ -u16 devid = (readl (MVEBU_REG_PCIE_DEVID ) >>16 ) &0xffff ; - -switch (devid) { -case SOC_MV78230_ID : -case SOC_MV78260_ID : -case SOC_MV78460_ID : -return MVEBU_SOC_AXP ; - -case SOC_88F6720_ID : -return MVEBU_SOC_A375 ; - -case SOC_88F6810_ID : -case SOC_88F6820_ID : -case SOC_88F6828_ID : -return MVEBU_SOC_A38X ; - -case SOC_98DX3236_ID : -case SOC_98DX3336_ID : -case SOC_98DX4251_ID : -return MVEBU_SOC_MSYS ; - } - -return MVEBU_SOC_UNKNOWN ; -} -u32 get_boot_device (void ) {u32 val;@@ -305,7 +278,10 @@ int print_cpuinfo(void)break ; } -if (mvebu_soc_family () ==MVEBU_SOC_AXP ) { +switch (devid) { +case SOC_MV78230_ID : +case SOC_MV78260_ID : +case SOC_MV78460_ID :switch (revid) {case 1 :puts ("A0" );@@ -317,9 +293,9 @@ int print_cpuinfo(void)printf ("?? (%x)" , revid);break ; } - } +break ; -if (mvebu_soc_family () ==MVEBU_SOC_A375 ) { +case SOC_88F6720_ID :switch (revid) {case MV_88F67XX_A0_ID :puts ("A0" );@@ -328,9 +304,11 @@ int print_cpuinfo(void)printf ("?? (%x)" , revid);break ; } - } +break ; -if (mvebu_soc_family () ==MVEBU_SOC_A38X ) { +case SOC_88F6810_ID : +case SOC_88F6820_ID : +case SOC_88F6828_ID :switch (revid) {case MV_88F68XX_Z1_ID :puts ("Z1" );@@ -345,9 +323,11 @@ int print_cpuinfo(void)printf ("?? (%x)" , revid);break ; } - } +break ; -if (mvebu_soc_family () ==MVEBU_SOC_MSYS ) { +case SOC_98DX3236_ID : +case SOC_98DX3336_ID : +case SOC_98DX4251_ID :switch (revid) {case 3 :puts ("A0" );@@ -359,6 +339,11 @@ int print_cpuinfo(void)printf ("?? (%x)" , revid);break ; } +break ; + +default : +printf ("?? (%x)" , revid); +break ; }get_sar_freq (&sar_freq);@@ -463,7 +448,7 @@ int arch_cpu_init(void)struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE ; -if (mvebu_soc_family () ==MVEBU_SOC_A38X ) { +if (IS_ENABLED (CONFIG_ARMADA_38X )) {/* * To fully release / unlock this area from cache, we need * to flush all caches and disable the L2 cache. @@ -492,7 +477,7 @@ int arch_cpu_init(void)*/ mvebu_mbus_probe (NULL ,0 ); -if (mvebu_soc_family () ==MVEBU_SOC_AXP ) { +if (IS_ENABLED (CONFIG_ARMADA_XP )) {/* * Now the SDRAM access windows can be reconfigured using * the information in the SDRAM scratch pad registers @@ -506,7 +491,7 @@ int arch_cpu_init(void)*/ mvebu_mbus_probe (windows,ARRAY_SIZE (windows)); -if (mvebu_soc_family () ==MVEBU_SOC_AXP ) { +if (IS_ENABLED (CONFIG_ARMADA_XP )) {/* Enable GBE0, GBE1, LCD and NFC PUP */ clrsetbits_le32(ARMADA_XP_PUP_ENABLE, 0, GE0_PUP_EN | GE1_PUP_EN | LCD_PUP_EN |@@ -530,9 +515,9 @@ u32 mvebu_get_nand_clock(void) {u32 reg; -if (mvebu_soc_family () ==MVEBU_SOC_A38X ) +if (IS_ENABLED (CONFIG_ARMADA_38X )) reg =MVEBU_DFX_DIV_CLK_CTRL (1 ); -else if (mvebu_soc_family () ==MVEBU_SOC_MSYS ) +else if (IS_ENABLED (CONFIG_ARMADA_MSYS )) reg =MVEBU_DFX_DIV_CLK_CTRL (8 );else reg =MVEBU_CORE_DIV_CLK_CTRL (1 );@@ -678,7 +663,7 @@ void enable_caches(void)* ethernet driver (mvpp2). So lets keep the d-cache disabled * until this is solved. */ -if (mvebu_soc_family () !=MVEBU_SOC_A375 ) { +if (IS_ENABLED (CONFIG_ARMADA_375 )) {/* Enable D-cache. I-cache is already enabled in start.S */ dcache_enable (); }@@ -686,7 +671,7 @@ void enable_caches(void)void v7_outer_cache_enable (void ) { -if (mvebu_soc_family () ==MVEBU_SOC_AXP ) { +if (IS_ENABLED (CONFIG_ARMADA_XP )) {struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE ;u32 u;arch/arm/mach-mvebu/dram.c +6
-12@@ -220,7 +220,7 @@ static int ecc_enabled(void)return 0 ; } -/* Return the width of the DRAM bus, or 0 for unknown. */ +/* Return the width of the DRAM bus. */ static int bus_width (void ) {int full_width =0 ;@@ -228,17 +228,11 @@ static int bus_width(void)if (reg_read (REG_SDRAM_CONFIG_ADDR ) & (1 <<REG_SDRAM_CONFIG_WIDTH_OFFS )) full_width =1 ; -switch (mvebu_soc_family ()) { -case MVEBU_SOC_AXP : -return full_width ?64 :32 ; -break ; -case MVEBU_SOC_A375 : -case MVEBU_SOC_A38X : -case MVEBU_SOC_MSYS : -return full_width ?32 :16 ; -default : -return 0 ; - } +#ifdef CONFIG_ARMADA_XP +return full_width ?64 :32 ; +#else +return full_width ?32 :16 ; +#endif }static int cycle_mode (void )arch/arm/mach-mvebu/include/mach/cpu.h +0
-8@@ -61,14 +61,6 @@ enum cpu_attrib { CPU_ATTR_DEV_CS3 = 0x37, }; -enum { -MVEBU_SOC_AXP , -MVEBU_SOC_A375 , -MVEBU_SOC_A38X , -MVEBU_SOC_MSYS , -MVEBU_SOC_UNKNOWN , -}; -#define MVEBU_SDRAM_SIZE_MAX 0xc0000000/*
arch/arm/mach-mvebu/include/mach/cpu.h unsigned int mvebu_sdram_bar(enum memory_bank bank); · line 148
Quoted 7 lines
arch/arm/mach-mvebu/include/mach/cpu.h +0
-1@@ -151,7 +143,6 @@ unsigned int mvebu_sdram_bar(enum memory_bank bank);unsigned int mvebu_sdram_bs (enum memory_bank bank);void mvebu_sdram_size_adjust (enum memory_bank bank);int mvebu_mbus_probe (struct mbus_win windows[],int count); -int mvebu_soc_family (void );u32 mvebu_get_nand_clock (void );void __noreturn return_to_bootrom (void );
Viele Grüße,
Stefan Roese
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]