Backport support for Telit FN980 v1 and FN990
cover Backport support for Telit FN980 v1 and FN990
Hi,
these two patches are the backport for 5.15.y of the following commits:
commit a96ef8b504efb2ad445dfb6d54f9488c3ddf23d2
bus: mhi: host: pci_generic: add Telit FN980 v1 hardware revisio
commit 77fc41204734042861210b9d05338c9b8360affb
bus: mhi: host: pci_generic: add Telit FN990
Backported because the orinal commits don't apply because of conflicts.
Tested on version 5.15.55.
Daniele Palmas (2):
bus: mhi: host: pci_generic: add Telit FN980 v1 hardware revision
bus: mhi: host: pci_generic: add Telit FN990
drivers/bus/mhi/pci_generic.c | 79 +++++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+)
Signature · 1 line
2.37.1
PATCH 1/2 bus: mhi: host: pci_generic: add Telit FN980 v1 hardware revision
From: Daniele Palmas <[email protected]>
commit a96ef8b504efb2ad445dfb6d54f9488c3ddf23d2 upstream.
Add Telit FN980 v1 hardware revision:
01:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:0306]
Subsystem: Device [1c5d:2000]
--- drivers/bus/mhi/pci_generic.c | 38 +++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)
drivers/bus/mhi/pci_generic.c +38 -0
@@ -406,7 +406,45 @@ static const struct mhi_pci_dev_info mhi_mv31_info = { .mru_default = 32768, }; +static const struct mhi_channel_config mhi_telit_fn980_hw_v1_channels[] = { +MHI_CHANNEL_CONFIG_UL (14 ,"QMI" ,32 ,0 ), +MHI_CHANNEL_CONFIG_DL (15 ,"QMI" ,32 ,0 ), +MHI_CHANNEL_CONFIG_UL (20 ,"IPCR" ,16 ,0 ), +MHI_CHANNEL_CONFIG_DL_AUTOQUEUE (21 ,"IPCR" ,16 ,0 ), +MHI_CHANNEL_CONFIG_HW_UL (100 ,"IP_HW0" ,128 ,1 ), +MHI_CHANNEL_CONFIG_HW_DL (101 ,"IP_HW0" ,128 ,2 ), +}; + +static struct mhi_event_config mhi_telit_fn980_hw_v1_events[] = { +MHI_EVENT_CONFIG_CTRL (0 ,128 ), +MHI_EVENT_CONFIG_HW_DATA (1 ,1024 ,100 ), +MHI_EVENT_CONFIG_HW_DATA (2 ,2048 ,101 ) +}; + +static struct mhi_controller_config modem_telit_fn980_hw_v1_config = { + .max_channels =128 , + .timeout_ms =20000 , + .num_channels =ARRAY_SIZE (mhi_telit_fn980_hw_v1_channels), + .ch_cfg = mhi_telit_fn980_hw_v1_channels, + .num_events =ARRAY_SIZE (mhi_telit_fn980_hw_v1_events), + .event_cfg = mhi_telit_fn980_hw_v1_events, +}; + +static const struct mhi_pci_dev_info mhi_telit_fn980_hw_v1_info = { + .name ="telit-fn980-hwv1" , + .fw ="qcom/sdx55m/sbl1.mbn" , + .edl ="qcom/sdx55m/edl.mbn" , + .config = &modem_telit_fn980_hw_v1_config, + .bar_num =MHI_PCI_DEFAULT_BAR_NUM , + .dma_data_width =32 , + .mru_default =32768 , + .sideband_wake = false, +}; +static const struct pci_device_id mhi_pci_id_table[] = { +/* Telit FN980 hardware revision v1 */ + {PCI_DEVICE_SUB (PCI_VENDOR_ID_QCOM ,0x0306 ,0x1C5D ,0x2000 ), + .driver_data = (kernel_ulong_t) &mhi_telit_fn980_hw_v1_info }, {PCI_DEVICE (PCI_VENDOR_ID_QCOM ,0x0306 ), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info }, {PCI_DEVICE (PCI_VENDOR_ID_QCOM ,0x0304 ),
Signature · 1 line
2.37.1
PATCH 2/2 bus: mhi: host: pci_generic: add Telit FN990
In reply to Fabio PorceddaFrom: Daniele Palmas <[email protected]>
commit 77fc41204734042861210b9d05338c9b8360affb upstream.
Add Telit FN990:
01:00.0 Unassigned class [ff00]: Qualcomm Device 0308
Subsystem: Device 1c5d:2010
--- drivers/bus/mhi/pci_generic.c | 41 +++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+)
drivers/bus/mhi/pci_generic.c +41 -0
@@ -441,6 +441,44 @@ static const struct mhi_pci_dev_info mhi_telit_fn980_hw_v1_info = { .sideband_wake = false, }; +static const struct mhi_channel_config mhi_telit_fn990_channels[] = { +MHI_CHANNEL_CONFIG_UL_SBL (2 ,"SAHARA" ,32 ,0 ), +MHI_CHANNEL_CONFIG_DL_SBL (3 ,"SAHARA" ,32 ,0 ), +MHI_CHANNEL_CONFIG_UL (4 ,"DIAG" ,64 ,1 ), +MHI_CHANNEL_CONFIG_DL (5 ,"DIAG" ,64 ,1 ), +MHI_CHANNEL_CONFIG_UL (12 ,"MBIM" ,32 ,0 ), +MHI_CHANNEL_CONFIG_DL (13 ,"MBIM" ,32 ,0 ), +MHI_CHANNEL_CONFIG_UL (32 ,"DUN" ,32 ,0 ), +MHI_CHANNEL_CONFIG_DL (33 ,"DUN" ,32 ,0 ), +MHI_CHANNEL_CONFIG_HW_UL (100 ,"IP_HW0_MBIM" ,128 ,2 ), +MHI_CHANNEL_CONFIG_HW_DL (101 ,"IP_HW0_MBIM" ,128 ,3 ), +}; + +static struct mhi_event_config mhi_telit_fn990_events[] = { +MHI_EVENT_CONFIG_CTRL (0 ,128 ), +MHI_EVENT_CONFIG_DATA (1 ,128 ), +MHI_EVENT_CONFIG_HW_DATA (2 ,1024 ,100 ), +MHI_EVENT_CONFIG_HW_DATA (3 ,2048 ,101 ) +}; + +static const struct mhi_controller_config modem_telit_fn990_config = { + .max_channels =128 , + .timeout_ms =20000 , + .num_channels =ARRAY_SIZE (mhi_telit_fn990_channels), + .ch_cfg = mhi_telit_fn990_channels, + .num_events =ARRAY_SIZE (mhi_telit_fn990_events), + .event_cfg = mhi_telit_fn990_events, +}; + +static const struct mhi_pci_dev_info mhi_telit_fn990_info = { + .name ="telit-fn990" , + .config = &modem_telit_fn990_config, + .bar_num =MHI_PCI_DEFAULT_BAR_NUM , + .dma_data_width =32 , + .sideband_wake = false, + .mru_default =32768 , +}; +static const struct pci_device_id mhi_pci_id_table[] = {/* Telit FN980 hardware revision v1 */ {PCI_DEVICE_SUB (PCI_VENDOR_ID_QCOM ,0x0306 ,0x1C5D ,0x2000 ),
@@ -449,6 +487,9 @@ static const struct pci_device_id mhi_pci_id_table[] = { .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info }, +/* Telit FN990 */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2010), + .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info }, { PCI_DEVICE(0x1eac, 0x1001), /* EM120R-GL (sdx24) */ .driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info }, { PCI_DEVICE(0x1eac, 0x1002), /* EM160R-GL (sdx24) */
Signature · 1 line
2.37.1