Skip to contentSkip to conversation

5.10.132-rc1 review

PATCH In review Greg Kroah-Hartman 7 participants 119 messages Jul 19, 2022 – Jul 20, 2022

Subsystems (2)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.10.132-rc1 review

This is the start of the stable review cycle for the 5.10.132 release. There are 112 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.132-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.10.132-rc1

Juergen Gross <[email protected]>

    x86/pat: Fix x86_has_pat_wp()

Ilpo Järvinen <[email protected]>
serial: 8250: Fix PM usage_count for console handover

Ilpo Järvinen <[email protected]>
serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle

Ilpo Järvinen <[email protected]>
serial: stm32: Clear prev values before setting RTS delays

Yi Yang <[email protected]>
serial: 8250: fix return error code in serial8250_request_std_resource()

Yangxi Xiang <[email protected]>
vt: fix memory overlapping when deleting chars in the buffer

Chanho Park <[email protected]>
tty: serial: samsung_tty: set dma burst_size to 1

Thinh Nguyen <[email protected]>
usb: dwc3: gadget: Fix event pending check

Linyu Yuan <[email protected]>
usb: typec: add missing uevent when partner support PD

Lucien Buchmann <[email protected]>
USB: serial: ftdi_sio: add Belimo device ids

Linus Torvalds <[email protected]>
signal handling: don't use BUG_ON() for debugging

Keith Busch <[email protected]>
nvme-pci: phison e16 has bogus namespace ids

Srinivas Neeli <[email protected]>
Revert "can: xilinx_can: Limit CANFD brp to 2"

Gabriel Fernandez <[email protected]>
ARM: dts: stm32: use the correct clock source for CEC on stm32mp151

Linus Walleij <[email protected]>
soc: ixp4xx/npe: Fix unused match warning

Juergen Gross <[email protected]>
x86: Clear .brk area at early boot

Stafford Horne <[email protected]>
irqchip: or1k-pic: Undefine mask_ack for level triggered hardware

Charles Keepax <[email protected]>
ASoC: madera: Fix event generation for rate controls

Charles Keepax <[email protected]>
ASoC: madera: Fix event generation for OUT1 demux

Charles Keepax <[email protected]>
ASoC: cs47l15: Fix event generation for low power mux control

Charles Keepax <[email protected]>
ASoC: dapm: Initialise kcontrol data for mux/demux controls

Charles Keepax <[email protected]>
ASoC: wm5110: Fix DRE control

Peter Ujfalusi <[email protected]>
ASoC: SOF: Intel: hda-loader: Clarify the cl_dsp_init() flow

Haowen Bai <[email protected]>
pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux()

Mark Brown <[email protected]>
ASoC: ops: Fix off by one in range control validation

Jianglei Nie <[email protected]>
net: sfp: fix memory leak in sfp_probe()

Ruozhu Li <[email protected]>
nvme: fix regression when disconnect a recovering ctrl

Sagi Grimberg <[email protected]>
nvme-tcp: always fail a request when sending it failed

Michael Walle <[email protected]>
NFC: nxp-nci: don't print header length mismatch on i2c error

Hangyu Hua <[email protected]>
net: tipc: fix possible refcount leak in tipc_sk_create()

Kai-Heng Feng <[email protected]>
platform/x86: hp-wmi: Ignore Sanitization Mode event

Liang He <[email protected]>
cpufreq: pmac32-cpufreq: Fix refcount leak bug

John Garry <[email protected]>
scsi: hisi_sas: Limit max hw sectors for v3 HW

Florian Westphal <[email protected]>
netfilter: br_netfilter: do not skip all hooks with 0 priority

Stephan Gerhold <[email protected]>
virtio_mmio: Restore guest page size on resume

Stephan Gerhold <[email protected]>
virtio_mmio: Add missing PM calls to freeze/restore

Muchun Song <[email protected]>
mm: sysctl: fix missing numa_stat when !CONFIG_HUGETLB_PAGE

Tariq Toukan <[email protected]>
net/tls: Check for errors in tls_device_init

Vitaly Kuznetsov <[email protected]>
KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op()

Chia-Lin Kao (AceLan) <[email protected]>
net: atlantic: remove aq_nic_deinit() when resume

Chia-Lin Kao (AceLan) <[email protected]>
net: atlantic: remove deep parameter on suspend/resume functions

Íñigo Huguet <[email protected]>
sfc: fix kernel panic when creating VF

Andrea Mayer <[email protected]>
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()

Andrea Mayer <[email protected]>
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors

Andrea Mayer <[email protected]>
seg6: fix skb checksum evaluation in SRH encapsulation/insertion

Íñigo Huguet <[email protected]>
sfc: fix use after free when disabling sriov

Jianglei Nie <[email protected]>
ima: Fix potential memory leak in ima_init_crypto()

Coiby Xu <[email protected]>
ima: force signature verification when CONFIG_KEXEC_SIG is configured

Liang He <[email protected]>
net: ftgmac100: Hold reference returned by of_get_child_by_name()

Kuniyuki Iwashima <[email protected]>
nexthop: Fix data-races around nexthop_compat_mode.

Kuniyuki Iwashima <[email protected]>
ipv4: Fix data-races around sysctl_ip_dynaddr.

Kuniyuki Iwashima <[email protected]>

    raw: Fix a data-race around sysctl_raw_l3mdev_accept.

Kuniyuki Iwashima <[email protected]>
icmp: Fix a data-race around sysctl_icmp_ratemask.

Kuniyuki Iwashima <[email protected]>
icmp: Fix a data-race around sysctl_icmp_ratelimit.

Kuniyuki Iwashima <[email protected]>
sysctl: Fix data-races in proc_dointvec_ms_jiffies().

Chris Wilson <[email protected]>
drm/i915/gt: Serialize TLB invalidates with GT resets

Dan Carpenter <[email protected]>
drm/i915/selftests: fix a couple IS_ERR() vs NULL tests

Michal Suchanek <[email protected]>
ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero

Ryan Wanner <[email protected]>
ARM: dts: at91: sama5d2: Fix typo in i2s1 node

Kuniyuki Iwashima <[email protected]>
ipv4: Fix a data-race around sysctl_fib_sync_mem.

Kuniyuki Iwashima <[email protected]>
icmp: Fix data-races around sysctl.

Kuniyuki Iwashima <[email protected]>
cipso: Fix data-races around sysctl.

Kuniyuki Iwashima <[email protected]>
net: Fix data-races around sysctl_mem.

Kuniyuki Iwashima <[email protected]>
inetpeer: Fix data-races around sysctl.

Kuniyuki Iwashima <[email protected]>
tcp: Fix a data-race around sysctl_tcp_max_orphans.

Kuniyuki Iwashima <[email protected]>
sysctl: Fix data races in proc_dointvec_jiffies().

Kuniyuki Iwashima <[email protected]>
sysctl: Fix data races in proc_doulongvec_minmax().

Kuniyuki Iwashima <[email protected]>
sysctl: Fix data races in proc_douintvec_minmax().

Kuniyuki Iwashima <[email protected]>
sysctl: Fix data races in proc_dointvec_minmax().

Kuniyuki Iwashima <[email protected]>
sysctl: Fix data races in proc_douintvec().

Kuniyuki Iwashima <[email protected]>
sysctl: Fix data races in proc_dointvec().

Jon Hunter <[email protected]>
net: stmmac: dwc-qos: Disable split header for Tegra194

Peter Ujfalusi <[email protected]>
ASoC: Intel: Skylake: Correct the handling of fmt_config flexible array

Peter Ujfalusi <[email protected]>
ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks()

Hector Martin <[email protected]>
ASoC: tas2764: Fix amp gain register offset & default

Hector Martin <[email protected]>
ASoC: tas2764: Correct playback volume range

Martin Povišer <[email protected]>
ASoC: tas2764: Fix and extend FSYNC polarity handling

Martin Povišer <[email protected]>
ASoC: tas2764: Add post reset delays

Francesco Dolcini <[email protected]>
ASoC: sgtl5000: Fix noise on shutdown/remove

Huaxin Lu <[email protected]>
ima: Fix a potential integer overflow in ima_appraise_measurement

Hangyu Hua <[email protected]>
drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()

Gal Pressman <[email protected]>
net/mlx5e: Fix capability check for updating vnic env counters

Tariq Toukan <[email protected]>
net/mlx5e: kTLS, Fix build time constant test in RX

Tariq Toukan <[email protected]>
net/mlx5e: kTLS, Fix build time constant test in TX

Zhen Lei <[email protected]>
ARM: 9210/1: Mark the FDT_FIXED sections as shareable

Ard Biesheuvel <[email protected]>
ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle

Cristian Ciocaltea <[email protected]>
spi: amd: Limit max transfer and message size

Kris Bahnsen <[email protected]>
ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count

Baokun Li <[email protected]>
ext4: fix race condition between ext4_write and ext4_convert_inline_data

Xiu Jianfeng <[email protected]>
Revert "evm: Fix memleak in init_desc"

Geert Uytterhoeven <[email protected]>
sh: convert nommu io{re,un}map() to static inline functions

Ryusuke Konishi <[email protected]>
nilfs2: fix incorrect masking of permission flags for symlinks

Dave Chinner <[email protected]>
fs/remap: constrain dedupe of EOF blocks

Dmitry Osipenko <[email protected]>
drm/panfrost: Fix shrinker list corruption by madvise IOCTL

Dmitry Osipenko <[email protected]>
drm/panfrost: Put mapping instead of shmem obj on panfrost_mmu_map_fault_addr() error

Filipe Manana <[email protected]>
btrfs: return -EAGAIN for NOWAIT dio reads/writes on compressed and inline extents

Tejun Heo <[email protected]>
cgroup: Use separate src/dst nodes when preloading css_sets for migration

Felix Fietkau <[email protected]>
wifi: mac80211: fix queue selection for mesh/OCB interfaces

Ard Biesheuvel <[email protected]>
ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction

Dmitry Osipenko <[email protected]>
ARM: 9213/1: Print message about disabled Spectre workarounds only once

Nicolas Dichtel <[email protected]>
ip: fix dflt addr selection for connected nexthop

Steven Rostedt (Google) <[email protected]>
net: sock: tracing: Fix sock_exceed_buf_limit not to dereference stale pointer

Zheng Yejian <[email protected]>
tracing/histograms: Fix memory leak problem

Gowans, James <[email protected]>
mm: split huge PUD on wp_huge_pud fallback

Oleg Nesterov <[email protected]>
fix race between exit_itimers() and /proc/pid/timers

Juergen Gross <[email protected]>
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue

Meng Tang <[email protected]>
ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop

Meng Tang <[email protected]>
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221

Meng Tang <[email protected]>
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671

Meng Tang <[email protected]>
ALSA: hda/realtek: Fix headset mic for Acer SF313-51

Meng Tang <[email protected]>
ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model

Meng Tang <[email protected]>
ALSA: hda - Add fixup for Dell Latitidue E5430

-------------

Diffstat:

 Documentation/networking/ip-sysctl.rst             |  4 +-
 Makefile                                           |  4 +-
 arch/arm/boot/dts/imx6qdl-ts7970.dtsi              |  2 +-
 arch/arm/boot/dts/sama5d2.dtsi                     |  2 +-
 arch/arm/boot/dts/stm32mp151.dtsi                  |  2 +-
 arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts  |  2 +-
 arch/arm/include/asm/mach/map.h                    |  1 +
 arch/arm/include/asm/ptrace.h                      | 26 +++++++++++
 arch/arm/mm/alignment.c                            |  3 ++
 arch/arm/mm/mmu.c                                  | 15 +++++-
 arch/arm/mm/proc-v7-bugs.c                         |  9 ++--
 arch/arm/probes/decode.h                           | 26 +----------
 arch/sh/include/asm/io.h                           |  8 +++-
 arch/x86/kernel/head64.c                           |  2 +
 arch/x86/kernel/ima_arch.c                         |  2 +
 arch/x86/kvm/x86.c                                 | 18 ++++----
 arch/x86/mm/init.c                                 | 14 +++++-
 drivers/cpufreq/pmac32-cpufreq.c                   |  4 ++
 drivers/gpu/drm/i915/display/intel_dp_mst.c        |  1 +
 drivers/gpu/drm/i915/gt/intel_gt.c                 | 15 +++++-
 drivers/gpu/drm/i915/gt/selftest_lrc.c             |  8 ++--
 drivers/gpu/drm/panfrost/panfrost_drv.c            |  4 +-
 drivers/gpu/drm/panfrost/panfrost_mmu.c            |  2 +-
 drivers/irqchip/irq-or1k-pic.c                     |  1 -
 drivers/net/can/xilinx_can.c                       |  4 +-
 .../net/ethernet/aquantia/atlantic/aq_pci_func.c   | 23 ++++------
 drivers/net/ethernet/faraday/ftgmac100.c           | 15 +++++-
 .../ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c |  3 +-
 .../ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c |  3 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_stats.c |  2 +-
 drivers/net/ethernet/sfc/ef10.c                    |  3 ++
 drivers/net/ethernet/sfc/ef10_sriov.c              | 10 ++--
 .../ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c    |  1 +
 drivers/net/phy/sfp.c                              |  2 +-
 drivers/net/xen-netback/rx.c                       |  1 +
 drivers/nfc/nxp-nci/i2c.c                          |  8 +++-
 drivers/nvme/host/core.c                           |  2 +
 drivers/nvme/host/nvme.h                           |  1 +
 drivers/nvme/host/pci.c                            |  3 +-
 drivers/nvme/host/rdma.c                           | 12 +++--
 drivers/nvme/host/tcp.c                            | 13 ++++--
 drivers/pinctrl/aspeed/pinctrl-aspeed.c            |  4 +-
 drivers/platform/x86/hp-wmi.c                      |  3 ++
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c             |  7 +++
 drivers/soc/ixp4xx/ixp4xx-npe.c                    |  2 +-
 drivers/spi/spi-amd.c                              |  8 ++++
 drivers/tty/serial/8250/8250_core.c                |  4 ++
 drivers/tty/serial/8250/8250_port.c                |  4 +-
 drivers/tty/serial/amba-pl011.c                    | 23 +++++++++-
 drivers/tty/serial/samsung_tty.c                   |  5 +-
 drivers/tty/serial/serial_core.c                   |  5 --
 drivers/tty/serial/stm32-usart.c                   |  2 +
 drivers/tty/vt/vt.c                                |  2 +-
 drivers/usb/dwc3/gadget.c                          |  4 +-
 drivers/usb/serial/ftdi_sio.c                      |  3 ++
 drivers/usb/serial/ftdi_sio_ids.h                  |  6 +++
 drivers/usb/typec/class.c                          |  1 +
 drivers/virtio/virtio_mmio.c                       | 26 +++++++++++
 fs/btrfs/inode.c                                   | 14 +++++-
 fs/exec.c                                          |  2 +-
 fs/ext4/extents.c                                  |  9 ++--
 fs/ext4/inode.c                                    |  9 ----
 fs/nilfs2/nilfs.h                                  |  3 ++
 fs/remap_range.c                                   |  3 +-
 include/linux/cgroup-defs.h                        |  3 +-
 include/linux/kexec.h                              |  6 +++
 include/linux/sched/task.h                         |  2 +-
 include/linux/serial_core.h                        |  5 ++
 include/net/raw.h                                  |  2 +-
 include/net/sock.h                                 |  2 +-
 include/net/tls.h                                  |  4 +-
 include/trace/events/sock.h                        |  6 ++-
 kernel/cgroup/cgroup.c                             | 37 +++++++++------
 kernel/exit.c                                      |  2 +-
 kernel/kexec_file.c                                | 11 ++++-
 kernel/signal.c                                    |  8 ++--
 kernel/sysctl.c                                    | 53 ++++++++++++----------
 kernel/time/posix-timers.c                         | 19 ++++++--
 kernel/trace/trace_events_hist.c                   |  2 +
 mm/memory.c                                        | 27 +++++------
 net/bridge/br_netfilter_hooks.c                    | 21 +++++++--
 net/core/filter.c                                  |  1 -
 net/ipv4/af_inet.c                                 |  4 +-
 net/ipv4/cipso_ipv4.c                              | 12 +++--
 net/ipv4/fib_semantics.c                           |  4 +-
 net/ipv4/fib_trie.c                                |  2 +-
 net/ipv4/icmp.c                                    | 10 ++--
 net/ipv4/inetpeer.c                                | 12 +++--
 net/ipv4/nexthop.c                                 |  5 +-
 net/ipv4/tcp.c                                     |  3 +-
 net/ipv6/route.c                                   |  2 +-
 net/ipv6/seg6_iptunnel.c                           |  5 +-
 net/ipv6/seg6_local.c                              |  2 -
 net/mac80211/wme.c                                 |  4 +-
 net/tipc/socket.c                                  |  1 +
 net/tls/tls_device.c                               |  4 +-
 net/tls/tls_main.c                                 |  7 ++-
 security/integrity/evm/evm_crypto.c                |  7 +--
 security/integrity/ima/ima_appraise.c              |  3 +-
 security/integrity/ima/ima_crypto.c                |  1 +
 sound/pci/hda/patch_conexant.c                     |  1 +
 sound/pci/hda/patch_realtek.c                      | 16 +++++++
 sound/soc/codecs/cs47l15.c                         |  5 +-
 sound/soc/codecs/madera.c                          | 14 ++++--
 sound/soc/codecs/sgtl5000.c                        |  9 ++++
 sound/soc/codecs/sgtl5000.h                        |  1 +
 sound/soc/codecs/tas2764.c                         | 46 +++++++++++--------
 sound/soc/codecs/tas2764.h                         |  6 +--
 sound/soc/codecs/wm5110.c                          |  8 +++-
 sound/soc/intel/skylake/skl-nhlt.c                 | 40 ++++++++++------
 sound/soc/soc-dapm.c                               |  5 ++
 sound/soc/soc-ops.c                                |  4 +-
 sound/soc/sof/intel/hda-loader.c                   |  8 ++--
 113 files changed, 604 insertions(+), 288 deletions(-)
author maintainer
#1 lore raw

PATCH 1/112 ALSA: hda - Add fixup for Dell Latitidue E5430

From: Meng Tang <[email protected]>

commit 841bdf85c226803a78a9319af9b2caa9bf3e2eda upstream.

Another Dell model, another fixup entry: Latitude E5430 needs the same fixup as other Latitude E series as workaround for noise problems.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -8642,6 +8642,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1025, 0x1430, "Acer TravelMate B311R-31", ALC256_FIXUP_ACER_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1025, 0x1466, "Acer Aspire A515-56", ALC255_FIXUP_ACER_HEADPHONE_AND_MIC),
 	SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
+	SND_PCI_QUIRK(0x1028, 0x053c, "Dell Latitude E5430", ALC292_FIXUP_DELL_E7X),
 	SND_PCI_QUIRK(0x1028, 0x054b, "Dell XPS one 2710", ALC275_FIXUP_DELL_XPS),
 	SND_PCI_QUIRK(0x1028, 0x05bd, "Dell Latitude E6440", ALC292_FIXUP_DELL_E7X),
 	SND_PCI_QUIRK(0x1028, 0x05be, "Dell Latitude E6540", ALC292_FIXUP_DELL_E7X),
author maintainer
#2 lore raw

PATCH 2/112 ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model

In reply to Greg Kroah-Hartman

From: Meng Tang <[email protected]>

commit d16d69bf5a25d91c6d8f3e29711be12551bf56cd upstream.

There is another HP ProDesk 600 G3 model with the PCI SSID 103c:82b4 that requires the quirk HP_MIC_NO_PRESENCE. Add the corresponding entry to the quirk table.

---
 sound/pci/hda/patch_conexant.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_conexant.c +1 -0
@@ -937,6 +937,7 @@ static const struct snd_pci_quirk cxt506
 	SND_PCI_QUIRK(0x103c, 0x828c, "HP EliteBook 840 G4", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x8299, "HP 800 G3 SFF", CXT_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x829a, "HP 800 G3 DM", CXT_FIXUP_HP_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x103c, 0x82b4, "HP ProDesk 600 G3", CXT_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x836e, "HP ProBook 455 G5", CXT_FIXUP_MUTE_LED_GPIO),
 	SND_PCI_QUIRK(0x103c, 0x837f, "HP ProBook 470 G5", CXT_FIXUP_MUTE_LED_GPIO),
 	SND_PCI_QUIRK(0x103c, 0x83b2, "HP EliteBook 840 G5", CXT_FIXUP_HP_DOCK),
author maintainer
#3 lore raw

PATCH 3/112 ALSA: hda/realtek: Fix headset mic for Acer SF313-51

In reply to Greg Kroah-Hartman

From: Meng Tang <[email protected]>

commit 5f3fe25e70559fa3b096ab17e13316c93ddb7020 upstream.

The issue on Acer SWIFT SF313-51 is that headset microphone doesn't work. The following quirk fixed headset microphone issue. Note that the fixup of SF314-54/55 (ALC256_FIXUP_ACER_HEADSET_MIC) was not successful on my SF313-51.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -8633,6 +8633,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1025, 0x1290, "Acer Veriton Z4860G", ALC286_FIXUP_ACER_AIO_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1025, 0x1291, "Acer Veriton Z4660G", ALC286_FIXUP_ACER_AIO_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1025, 0x129c, "Acer SWIFT SF314-55", ALC256_FIXUP_ACER_HEADSET_MIC),
+	SND_PCI_QUIRK(0x1025, 0x129d, "Acer SWIFT SF313-51", ALC256_FIXUP_ACER_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1025, 0x1300, "Acer SWIFT SF314-56", ALC256_FIXUP_ACER_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1025, 0x1308, "Acer Aspire Z24-890", ALC286_FIXUP_ACER_AIO_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1025, 0x132a, "Acer TravelMate B114-21", ALC233_FIXUP_ACER_HEADSET_MIC),
author maintainer
#4 lore raw

PATCH 4/112 ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671

In reply to Greg Kroah-Hartman

From: Meng Tang <[email protected]>

commit dbe75d314748e08fc6e4576d153d8a69621ee5ca upstream.

On a HP 288 Pro G6, the front mic could not be detected.In order to get it working, the pin configuration needs to be set correctly, and the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -10928,6 +10928,7 @@ static const struct snd_pci_quirk alc662
 	SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
 	SND_PCI_QUIRK(0x103c, 0x8719, "HP", ALC897_FIXUP_HP_HSMIC_VERB),
 	SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2),
+	SND_PCI_QUIRK(0x103c, 0x877e, "HP 288 Pro G6", ALC671_FIXUP_HP_HEADSET_MIC2),
 	SND_PCI_QUIRK(0x103c, 0x885f, "HP 288 Pro G8", ALC671_FIXUP_HP_HEADSET_MIC2),
 	SND_PCI_QUIRK(0x1043, 0x1080, "Asus UX501VW", ALC668_FIXUP_HEADSET_MODE),
 	SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_ASUS_Nx50),
author maintainer
#5 lore raw

PATCH 5/112 ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221

In reply to Greg Kroah-Hartman

From: Meng Tang <[email protected]>

commit 4ba5c853d7945b3855c3dcb293f7f9f019db641e upstream.

On a HP 288 Pro G2 MT (X9W02AV), the front mic could not be detected. In order to get it working, the pin configuration needs to be set correctly, and the ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE fixup needs to be applied.

---
 sound/pci/hda/patch_realtek.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)
sound/pci/hda/patch_realtek.c +12 -0
@@ -6725,6 +6725,7 @@ enum {
 	ALC298_FIXUP_LENOVO_SPK_VOLUME,
 	ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER,
 	ALC269_FIXUP_ATIV_BOOK_8,
+	ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE,
 	ALC221_FIXUP_HP_MIC_NO_PRESENCE,
 	ALC256_FIXUP_ASUS_HEADSET_MODE,
 	ALC256_FIXUP_ASUS_MIC,
@@ -7651,6 +7652,16 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC269_FIXUP_NO_SHUTUP
 	},
+	[ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x19, 0x01a1913c }, /* use as headset mic, without its own jack detect */
+			{ 0x1a, 0x01813030 }, /* use as headphone mic, without its own jack detect */
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC269_FIXUP_HEADSET_MODE
+	},
 	[ALC221_FIXUP_HP_MIC_NO_PRESENCE] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
@@ -8758,6 +8769,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x2335, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x2336, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x2337, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+	SND_PCI_QUIRK(0x103c, 0x2b5e, "HP 288 Pro G2 MT", ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x802e, "HP Z240 SFF", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x802f, "HP Z240", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x8077, "HP", ALC256_FIXUP_HP_HEADSET_MIC),
author maintainer
#6 lore raw

PATCH 6/112 ALSA: hda/realtek - Enable the headset-mic on a Xiaomis laptop

In reply to Greg Kroah-Hartman

From: Meng Tang <[email protected]>

commit 9b043a8f386485c74c0f8eea2c287d5bdbdf3279 upstream.

The headset on this machine is not defined, after applying the quirk ALC256_FIXUP_ASUS_HEADSET_MIC, the headset-mic works well

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -9087,6 +9087,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1d72, 0x1602, "RedmiBook", ALC255_FIXUP_XIAOMI_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1d72, 0x1701, "XiaomiNotebook Pro", ALC298_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1d72, 0x1901, "RedmiBook 14", ALC256_FIXUP_ASUS_HEADSET_MIC),
+	SND_PCI_QUIRK(0x1d72, 0x1945, "Redmi G", ALC256_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1d72, 0x1947, "RedmiBook Air", ALC255_FIXUP_XIAOMI_HEADSET_MIC),
 	SND_PCI_QUIRK(0x8086, 0x2074, "Intel NUC 8", ALC233_FIXUP_INTEL_NUC8_DMIC),
 	SND_PCI_QUIRK(0x8086, 0x2080, "Intel NUC 8 Rugged", ALC256_FIXUP_INTEL_NUC8_RUGGED),
author maintainer
#7 lore raw

PATCH 7/112 xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

commit 94e8100678889ab428e68acadf042de723f094b9 upstream.

xenvif_rx_next_skb() is expecting the rx queue not being empty, but in case the loop in xenvif_rx_action() is doing multiple iterations, the availability of another skb in the rx queue is not being checked.

This can lead to crashes:

[40072.537261] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
[40072.537407] IP: xenvif_rx_skb+0x23/0x590 [xen_netback]
[40072.537534] PGD 0 P4D 0
[40072.537644] Oops: 0000 [#1] SMP NOPTI
[40072.537749] CPU: 0 PID: 12505 Comm: v1-c40247-q2-gu Not tainted 4.12.14-122.121-default #1 SLE12-SP5
[40072.537867] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 11/23/2021
[40072.537999] task: ffff880433b38100 task.stack: ffffc90043d40000
[40072.538112] RIP: e030:xenvif_rx_skb+0x23/0x590 [xen_netback]
[40072.538217] RSP: e02b:ffffc90043d43de0 EFLAGS: 00010246
[40072.538319] RAX: 0000000000000000 RBX: ffffc90043cd7cd0 RCX: 00000000000000f7
[40072.538430] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffc90043d43df8
[40072.538531] RBP: 000000000000003f R08: 000077ff80000000 R09: 0000000000000008
[40072.538644] R10: 0000000000007ff0 R11: 00000000000008f6 R12: ffffc90043ce2708
[40072.538745] R13: 0000000000000000 R14: ffffc90043d43ed0 R15: ffff88043ea748c0
[40072.538861] FS: 0000000000000000(0000) GS:ffff880484600000(0000) knlGS:0000000000000000
[40072.538988] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[40072.539088] CR2: 0000000000000080 CR3: 0000000407ac8000 CR4: 0000000000040660
[40072.539211] Call Trace:
[40072.539319] xenvif_rx_action+0x71/0x90 [xen_netback]
[40072.539429] xenvif_kthread_guest_rx+0x14a/0x29c [xen_netback]

Fix that by stopping the loop in case the rx queue becomes empty.

---
 drivers/net/xen-netback/rx.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/xen-netback/rx.c +1 -0
@@ -495,6 +495,7 @@ void xenvif_rx_action(struct xenvif_queu
 	queue->rx_copy.completed = &completed_skbs;
 
 	while (xenvif_rx_ring_slots_available(queue) &&
+	       !skb_queue_empty(&queue->rx_queue) &&
 	       work_done < RX_BATCH_SIZE) {
 		xenvif_rx_skb(queue);
 		work_done++;
author maintainer
#8 lore raw

PATCH 8/112 fix race between exit_itimers() and /proc/pid/timers

In reply to Greg Kroah-Hartman

From: Oleg Nesterov <[email protected]>

commit d5b36a4dbd06c5e8e36ca8ccc552f679069e2946 upstream.

As Chris explains, the comment above exit_itimers() is not correct, we can race with proc_timers_seq_ops. Change exit_itimers() to clear signal->posix_timers with ->siglock held.

---
 fs/exec.c                  |    2 +-
 include/linux/sched/task.h |    2 +-
 kernel/exit.c              |    2 +-
 kernel/time/posix-timers.c |   19 ++++++++++++++-----
 4 files changed, 17 insertions(+), 8 deletions(-)
fs/exec.c +1 -1
@@ -1286,7 +1286,7 @@ int begin_new_exec(struct linux_binprm *
 	bprm->mm = NULL;
 
 #ifdef CONFIG_POSIX_TIMERS
-	exit_itimers(me->signal);
+	exit_itimers(me);
 	flush_itimer_signals();
 #endif
 
include/linux/sched/task.h +1 -1
@@ -82,7 +82,7 @@ static inline void exit_thread(struct ta
 extern void do_group_exit(int);
 
 extern void exit_files(struct task_struct *);
-extern void exit_itimers(struct signal_struct *);
+extern void exit_itimers(struct task_struct *);
 
 extern pid_t kernel_clone(struct kernel_clone_args *kargs);
 struct task_struct *fork_idle(int);
kernel/exit.c +1 -1
@@ -782,7 +782,7 @@ void __noreturn do_exit(long code)
 
 #ifdef CONFIG_POSIX_TIMERS
 		hrtimer_cancel(&tsk->signal->real_timer);
-		exit_itimers(tsk->signal);
+		exit_itimers(tsk);
 #endif
 		if (tsk->mm)
 			setmax_mm_hiwater_rss(&tsk->signal->maxrss, tsk->mm);
kernel/time/posix-timers.c +14 -5
@@ -1051,15 +1051,24 @@ retry_delete:
 }
 
 /*
- * This is called by do_exit or de_thread, only when there are no more
- * references to the shared signal_struct.
+ * This is called by do_exit or de_thread, only when nobody else can
+ * modify the signal->posix_timers list. Yet we need sighand->siglock
+ * to prevent the race with /proc/pid/timers.
  */
-void exit_itimers(struct signal_struct *sig)
+void exit_itimers(struct task_struct *tsk)
 {
+	struct list_head timers;
 	struct k_itimer *tmr;
 
-	while (!list_empty(&sig->posix_timers)) {
-		tmr = list_entry(sig->posix_timers.next, struct k_itimer, list);
+	if (list_empty(&tsk->signal->posix_timers))
+		return;
+
+	spin_lock_irq(&tsk->sighand->siglock);
+	list_replace_init(&tsk->signal->posix_timers, &timers);
+	spin_unlock_irq(&tsk->sighand->siglock);
+
+	while (!list_empty(&timers)) {
+		tmr = list_first_entry(&timers, struct k_itimer, list);
 		itimer_delete(tmr);
 	}
 }
author maintainer
#9 lore raw

PATCH 9/112 mm: split huge PUD on wp_huge_pud fallback

In reply to Greg Kroah-Hartman

From: Gowans, James <[email protected]>

commit 14c99d65941538aa33edd8dc7b1bbbb593c324a2 upstream.

Currently the implementation will split the PUD when a fallback is taken inside the create_huge_pud function. This isn't where it should be done:
the splitting should be done in wp_huge_pud, just like it's done for PMDs. Reason being that if a callback is taken during create, there is no PUD yet so nothing to split, whereas if a fallback is taken when encountering a write protection fault there is something to split.

It looks like this was the original intention with the commit where the splitting was introduced, but somehow it got moved to the wrong place between v1 and v2 of the patch series. Rebase mistake perhaps.

Fixes 327e9fd48972 ("mm: Split huge pages on write-notify or COW")
Cc Christian König <[email protected]>
Cc Jan H. Schönherr <[email protected]>
---
 mm/memory.c |   27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)
mm/memory.c +14 -13
@@ -4369,6 +4369,19 @@ static vm_fault_t create_huge_pud(struct
 	defined(CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD)
 	/* No support for anonymous transparent PUD pages yet */
 	if (vma_is_anonymous(vmf->vma))
+		return VM_FAULT_FALLBACK;
+	if (vmf->vma->vm_ops->huge_fault)
+		return vmf->vma->vm_ops->huge_fault(vmf, PE_SIZE_PUD);
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+	return VM_FAULT_FALLBACK;
+}
+
+static vm_fault_t wp_huge_pud(struct vm_fault *vmf, pud_t orig_pud)
+{
+#if defined(CONFIG_TRANSPARENT_HUGEPAGE) &&			\
+	defined(CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD)
+	/* No support for anonymous transparent PUD pages yet */
+	if (vma_is_anonymous(vmf->vma))
 		goto split;
 	if (vmf->vma->vm_ops->huge_fault) {
 		vm_fault_t ret = vmf->vma->vm_ops->huge_fault(vmf, PE_SIZE_PUD);
@@ -4379,19 +4392,7 @@ static vm_fault_t create_huge_pud(struct
 split:
 	/* COW or write-notify not handled on PUD level: split pud.*/
 	__split_huge_pud(vmf->vma, vmf->pud, vmf->address);
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-	return VM_FAULT_FALLBACK;
-}
-
-static vm_fault_t wp_huge_pud(struct vm_fault *vmf, pud_t orig_pud)
-{
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-	/* No support for anonymous transparent PUD pages yet */
-	if (vma_is_anonymous(vmf->vma))
-		return VM_FAULT_FALLBACK;
-	if (vmf->vma->vm_ops->huge_fault)
-		return vmf->vma->vm_ops->huge_fault(vmf, PE_SIZE_PUD);
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE && CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD */
 	return VM_FAULT_FALLBACK;
 }
 
author maintainer
#10 lore raw

PATCH 10/112 tracing/histograms: Fix memory leak problem

In reply to Greg Kroah-Hartman

From: Zheng Yejian <[email protected]>

commit 7edc3945bdce9c39198a10d6129377a5c53559c2 upstream.

This reverts commit 46bbe5c671e06f070428b9be142cc4ee5cedebac.

As commit 46bbe5c671e0 ("tracing: fix double free") said, the "double free" problem reported by clang static analyzer is:

Quoted 4 lines

In parse_var_defs() if there is a problem allocating var_defs.expr, the earlier var_defs.name is freed. This free is duplicated by free_var_defs() which frees the rest of the list.

However, if there is a problem allocating N-th var_defs.expr:
+ in parse_var_defs(), the freed 'earlier var_defs.name' is

    actually the N-th var_defs.name;

+ then in free_var_defs(), the names from 0th to (N-1)-th are freed;

                        IF ALLOCATING PROBLEM HAPPENED HERE!!! -+
                                                                 \
                                                                  |
          0th           1th                 (N-1)-th      N-th    V
          +-------------+-------------+-----+-------------+-----------
var_defs: | name | expr | name | expr | ... | name | expr | name | ///
          +-------------+-------------+-----+-------------+-----------

These two frees don't act on same name, so there was no "double free" problem before. Conversely, after that commit, we get a "memory leak" problem because the above "N-th var_defs.name" is not freed.

If enable CONFIG_DEBUG_KMEMLEAK and inject a fault at where the N-th var_defs.expr allocated, then execute on shell like:

  $ echo 'hist:key=call_site:val=$v1,$v2:v1=bytes_req,v2=bytes_alloc' > \
/sys/kernel/debug/tracing/events/kmem/kmalloc/trigger

Then kmemleak reports:
unreferenced object 0xffff8fb100ef3518 (size 8):

    comm "bash", pid 196, jiffies 4295681690 (age 28.538s)
    hex dump (first 8 bytes):
      76 31 00 00 b1 8f ff ff                          v1......
    backtrace:
      [<0000000038fe4895>] kstrdup+0x2d/0x60
      [<00000000c99c049a>] event_hist_trigger_parse+0x206f/0x20e0
      [<00000000ae70d2cc>] trigger_process_regex+0xc0/0x110
      [<0000000066737a4c>] event_trigger_write+0x75/0xd0
      [<000000007341e40c>] vfs_write+0xbb/0x2a0
      [<0000000087fde4c2>] ksys_write+0x59/0xd0
      [<00000000581e9cdf>] do_syscall_64+0x3a/0x80
      [<00000000cf3b065c>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
---
 kernel/trace/trace_events_hist.c |    2 ++
 1 file changed, 2 insertions(+)
kernel/trace/trace_events_hist.c +2 -0
@@ -3943,6 +3943,8 @@ static int parse_var_defs(struct hist_tr
 
 			s = kstrdup(field_str, GFP_KERNEL);
 			if (!s) {
+				kfree(hist_data->attrs->var_defs.name[n_vars]);
+				hist_data->attrs->var_defs.name[n_vars] = NULL;
 				ret = -ENOMEM;
 				goto free;
 			}
author maintainer
#11 lore raw

PATCH 11/112 net: sock: tracing: Fix sock_exceed_buf_limit not to dereference stale pointer

In reply to Greg Kroah-Hartman

From: Steven Rostedt (Google) <[email protected]>

commit 820b8963adaea34a87abbecb906d1f54c0aabfb7 upstream.

The trace event sock_exceed_buf_limit saves the prot->sysctl_mem pointer and then dereferences it in the TP_printk() portion. This is unsafe as the TP_printk() portion is executed at the time the buffer is read. That is, it can be seconds, minutes, days, months, even years later. If the proto is freed, then this dereference will can also lead to a kernel crash.

Instead, save the sysctl_mem array into the ring buffer and have the TP_printk() reference that instead. This is the proper and safe way to read pointers in trace events.

Fixes 3847ce32aea9f ("core: add tracepoints for queueing skb to rcvbuf")
---
 include/trace/events/sock.h |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
include/trace/events/sock.h +4 -2
@@ -98,7 +98,7 @@ TRACE_EVENT(sock_exceed_buf_limit,
 
 	TP_STRUCT__entry(
 		__array(char, name, 32)
-		__field(long *, sysctl_mem)
+		__array(long, sysctl_mem, 3)
 		__field(long, allocated)
 		__field(int, sysctl_rmem)
 		__field(int, rmem_alloc)
@@ -110,7 +110,9 @@ TRACE_EVENT(sock_exceed_buf_limit,
 
 	TP_fast_assign(
 		strncpy(__entry->name, prot->name, 32);
-		__entry->sysctl_mem = prot->sysctl_mem;
+		__entry->sysctl_mem[0] = READ_ONCE(prot->sysctl_mem[0]);
+		__entry->sysctl_mem[1] = READ_ONCE(prot->sysctl_mem[1]);
+		__entry->sysctl_mem[2] = READ_ONCE(prot->sysctl_mem[2]);
 		__entry->allocated = allocated;
 		__entry->sysctl_rmem = sk_get_rmem0(sk, prot);
 		__entry->rmem_alloc = atomic_read(&sk->sk_rmem_alloc);
author maintainer
#12 lore raw

PATCH 12/112 ip: fix dflt addr selection for connected nexthop

In reply to Greg Kroah-Hartman

From: Nicolas Dichtel <[email protected]>

commit 747c14307214b55dbd8250e1ab44cad8305756f1 upstream.

When a nexthop is added, without a gw address, the default scope was set to 'host'. Thus, when a source address is selected, 127.0.0.1 may be chosen but rejected when the route is used.

When using a route without a nexthop id, the scope can be configured in the route, thus the problem doesn't exist.

To explain more deeply: when a user creates a nexthop, it cannot specify the scope. To create it, the function nh_create_ipv4() calls fib_check_nh() with scope set to 0. fib_check_nh() calls fib_check_nh_nongw() wich was setting scope to 'host'. Then, nh_create_ipv4() calls fib_info_update_nhc_saddr() with scope set to 'host'. The src addr is chosen before the route is inserted.

When a 'standard' route (ie without a reference to a nexthop) is added, fib_create_info() calls fib_info_update_nhc_saddr() with the scope set by the user. iproute2 set the scope to 'link' by default.

Here is a way to reproduce the problem:
ip netns add foo
ip -n foo link set lo up
ip netns add bar
ip -n bar link set lo up
sleep 1

ip -n foo link add name eth0 type dummy
ip -n foo link set eth0 up
ip -n foo address add 192.168.0.1/24 dev eth0

ip -n foo link add name veth0 type veth peer name veth1 netns bar ip -n foo link set veth0 up
ip -n bar link set veth1 up

ip -n bar address add 192.168.1.1/32 dev veth1
ip -n bar route add default dev veth1

ip -n foo nexthop add id 1 dev veth0
ip -n foo route add 192.168.1.1 nhid 1

Try to get/use the route:

Quoted 4 lines
$ ip -n foo route get 192.168.1.1
RTNETLINK answers: Invalid argument
$ ip netns exec foo ping -c1 192.168.1.1
ping: connect: Invalid argument

Try without nexthop group (iproute2 sets scope to 'link' by dflt):
ip -n foo route del 192.168.1.1
ip -n foo route add 192.168.1.1 dev veth0

Try to get/use the route:

Quoted 10 lines
$ ip -n foo route get 192.168.1.1
192.168.1.1 dev veth0 src 192.168.0.1 uid 0
    cache
$ ip netns exec foo ping -c1 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.039 ms

--- 192.168.1.1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.039/0.039/0.039/0.000 ms

---
 net/ipv4/fib_semantics.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv4/fib_semantics.c +1 -1
@@ -1229,7 +1229,7 @@ static int fib_check_nh_nongw(struct net
 
 	nh->fib_nh_dev = in_dev->dev;
 	dev_hold(nh->fib_nh_dev);
-	nh->fib_nh_scope = RT_SCOPE_HOST;
+	nh->fib_nh_scope = RT_SCOPE_LINK;
 	if (!netif_carrier_ok(nh->fib_nh_dev))
 		nh->fib_nh_flags |= RTNH_F_LINKDOWN;
 	err = 0;
author maintainer
#13 lore raw

PATCH 13/112 ARM: 9213/1: Print message about disabled Spectre workarounds only once

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

commit e4ced82deb5fb17222fb82e092c3f8311955b585 upstream.

Print the message about disabled Spectre workarounds only once. The message is printed each time CPU goes out from idling state on NVIDIA Tegra boards, causing storm in KMSG that makes system unusable.

---
 arch/arm/mm/proc-v7-bugs.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
arch/arm/mm/proc-v7-bugs.c +1 -2
@@ -108,8 +108,7 @@ static unsigned int spectre_v2_install_w
 #else
 static unsigned int spectre_v2_install_workaround(unsigned int method)
 {
-	pr_info("CPU%u: Spectre V2: workarounds disabled by configuration\n",
-		smp_processor_id());
+	pr_info_once("Spectre V2: workarounds disabled by configuration\n");
 
 	return SPECTRE_VULNERABLE;
 }
author maintainer
#14 lore raw

PATCH 14/112 ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction

In reply to Greg Kroah-Hartman

From: Ard Biesheuvel <[email protected]>

commit e5c46fde75e43c15a29b40e5fc5641727f97ae47 upstream.

After emulating a misaligned load or store issued in Thumb mode, we have to advance the IT state by hand, or it will get out of sync with the actual instruction stream, which means we'll end up applying the wrong condition code to subsequent instructions. This might corrupt the program state rather catastrophically.

So borrow the it_advance() helper from the probing code, and use it on CPSR if the emulated instruction is Thumb.

---
 arch/arm/include/asm/ptrace.h |   26 ++++++++++++++++++++++++++
 arch/arm/mm/alignment.c       |    3 +++
 arch/arm/probes/decode.h      |   26 +-------------------------
 3 files changed, 30 insertions(+), 25 deletions(-)
arch/arm/include/asm/ptrace.h +26 -0
@@ -164,5 +164,31 @@ static inline unsigned long user_stack_p
 		((current_stack_pointer | (THREAD_SIZE - 1)) - 7) - 1;	\
 })
 
+
+/*
+ * Update ITSTATE after normal execution of an IT block instruction.
+ *
+ * The 8 IT state bits are split into two parts in CPSR:
+ *	ITSTATE<1:0> are in CPSR<26:25>
+ *	ITSTATE<7:2> are in CPSR<15:10>
+ */
+static inline unsigned long it_advance(unsigned long cpsr)
+{
+	if ((cpsr & 0x06000400) == 0) {
+		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
+		cpsr &= ~PSR_IT_MASK;
+	} else {
+		/* We need to shift left ITSTATE<4:0> */
+		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
+		unsigned long it = cpsr & mask;
+		it <<= 1;
+		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
+		it &= mask;
+		cpsr &= ~mask;
+		cpsr |= it;
+	}
+	return cpsr;
+}
+
 #endif /* __ASSEMBLY__ */
 #endif
arch/arm/mm/alignment.c +3 -0
@@ -935,6 +935,9 @@ do_alignment(unsigned long addr, unsigne
 	if (type == TYPE_LDST)
 		do_alignment_finish_ldst(addr, instr, regs, offset);
 
+	if (thumb_mode(regs))
+		regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
+
 	return 0;
 
  bad_or_fault:
arch/arm/probes/decode.h +1 -25
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <asm/probes.h>
+#include <asm/ptrace.h>
 #include <asm/kprobes.h>
 
 void __init arm_probes_decode_init(void);
@@ -35,31 +36,6 @@ void __init find_str_pc_offset(void);
 #endif
 
 
-/*
- * Update ITSTATE after normal execution of an IT block instruction.
- *
- * The 8 IT state bits are split into two parts in CPSR:
- *	ITSTATE<1:0> are in CPSR<26:25>
- *	ITSTATE<7:2> are in CPSR<15:10>
- */
-static inline unsigned long it_advance(unsigned long cpsr)
-	{
-	if ((cpsr & 0x06000400) == 0) {
-		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
-		cpsr &= ~PSR_IT_MASK;
-	} else {
-		/* We need to shift left ITSTATE<4:0> */
-		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
-		unsigned long it = cpsr & mask;
-		it <<= 1;
-		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
-		it &= mask;
-		cpsr &= ~mask;
-		cpsr |= it;
-	}
-	return cpsr;
-}
-
 static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs)
 {
 	long cpsr = regs->ARM_cpsr;
author maintainer
#15 lore raw

PATCH 15/112 wifi: mac80211: fix queue selection for mesh/OCB interfaces

In reply to Greg Kroah-Hartman

From: Felix Fietkau <[email protected]>

commit 50e2ab39291947b6c6c7025cf01707c270fcde59 upstream.

When using iTXQ, the code assumes that there is only one vif queue for broadcast packets, using the BE queue. Allowing non-BE queue marking violates that assumption and txq->ac == skb_queue_mapping is no longer guaranteed. This can cause issues with queue handling in the driver and also causes issues with the recent ATF change, resulting in an AQL underflow warning.

---
 net/mac80211/wme.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/mac80211/wme.c +2 -2
@@ -145,8 +145,8 @@ u16 __ieee80211_select_queue(struct ieee
 	bool qos;
 
 	/* all mesh/ocb stations are required to support WME */
-	if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
-	    sdata->vif.type == NL80211_IFTYPE_OCB)
+	if (sta && (sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
+		    sdata->vif.type == NL80211_IFTYPE_OCB))
 		qos = true;
 	else if (sta)
 		qos = sta->sta.wme;
author maintainer
#16 lore raw

PATCH 16/112 cgroup: Use separate src/dst nodes when preloading css_sets for migration

In reply to Greg Kroah-Hartman

From: Tejun Heo <[email protected]>

commit 07fd5b6cdf3cc30bfde8fe0f644771688be04447 upstream.

Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time.

Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1:

#1> mkdir -p /sys/fs/cgroup/misc/a/b
#2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$!
#5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs

the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one.

After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens:

1. cgroup_migrate_add_src() is called on B for the leader.

2. cgroup_migrate_add_src() is called on A for the other threads.

3. cgroup_migrate_prepare_dst() is called. It scans the src list.

4. It notices that B wants to migrate to A, so it tries to A to the dst

    list but realizes that its ->mg_preload_node is already busy.

5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly.

6. The rest of migration takes place with B on the src list but nothing on the dst list.

This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free.

This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too.

This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other.

---
 include/linux/cgroup-defs.h |    3 ++-
 kernel/cgroup/cgroup.c      |   37 +++++++++++++++++++++++--------------
 2 files changed, 25 insertions(+), 15 deletions(-)
include/linux/cgroup-defs.h +2 -1
@@ -260,7 +260,8 @@ struct css_set {
 	 * List of csets participating in the on-going migration either as
 	 * source or destination.  Protected by cgroup_mutex.
 	 */
-	struct list_head mg_preload_node;
+	struct list_head mg_src_preload_node;
+	struct list_head mg_dst_preload_node;
 	struct list_head mg_node;
 
 	/*
kernel/cgroup/cgroup.c +23 -14
@@ -736,7 +736,8 @@ struct css_set init_css_set = {
 	.task_iters		= LIST_HEAD_INIT(init_css_set.task_iters),
 	.threaded_csets		= LIST_HEAD_INIT(init_css_set.threaded_csets),
 	.cgrp_links		= LIST_HEAD_INIT(init_css_set.cgrp_links),
-	.mg_preload_node	= LIST_HEAD_INIT(init_css_set.mg_preload_node),
+	.mg_src_preload_node	= LIST_HEAD_INIT(init_css_set.mg_src_preload_node),
+	.mg_dst_preload_node	= LIST_HEAD_INIT(init_css_set.mg_dst_preload_node),
 	.mg_node		= LIST_HEAD_INIT(init_css_set.mg_node),
 
 	/*
@@ -1211,7 +1212,8 @@ static struct css_set *find_css_set(stru
 	INIT_LIST_HEAD(&cset->threaded_csets);
 	INIT_HLIST_NODE(&cset->hlist);
 	INIT_LIST_HEAD(&cset->cgrp_links);
-	INIT_LIST_HEAD(&cset->mg_preload_node);
+	INIT_LIST_HEAD(&cset->mg_src_preload_node);
+	INIT_LIST_HEAD(&cset->mg_dst_preload_node);
 	INIT_LIST_HEAD(&cset->mg_node);
 
 	/* Copy the set of subsystem state objects generated in
@@ -2556,21 +2558,27 @@ int cgroup_migrate_vet_dst(struct cgroup
  */
 void cgroup_migrate_finish(struct cgroup_mgctx *mgctx)
 {
-	LIST_HEAD(preloaded);
 	struct css_set *cset, *tmp_cset;
 
 	lockdep_assert_held(&cgroup_mutex);
 
 	spin_lock_irq(&css_set_lock);
 
-	list_splice_tail_init(&mgctx->preloaded_src_csets, &preloaded);
-	list_splice_tail_init(&mgctx->preloaded_dst_csets, &preloaded);
+	list_for_each_entry_safe(cset, tmp_cset, &mgctx->preloaded_src_csets,
+				 mg_src_preload_node) {
+		cset->mg_src_cgrp = NULL;
+		cset->mg_dst_cgrp = NULL;
+		cset->mg_dst_cset = NULL;
+		list_del_init(&cset->mg_src_preload_node);
+		put_css_set_locked(cset);
+	}
 
-	list_for_each_entry_safe(cset, tmp_cset, &preloaded, mg_preload_node) {
+	list_for_each_entry_safe(cset, tmp_cset, &mgctx->preloaded_dst_csets,
+				 mg_dst_preload_node) {
 		cset->mg_src_cgrp = NULL;
 		cset->mg_dst_cgrp = NULL;
 		cset->mg_dst_cset = NULL;
-		list_del_init(&cset->mg_preload_node);
+		list_del_init(&cset->mg_dst_preload_node);
 		put_css_set_locked(cset);
 	}
 
@@ -2612,7 +2620,7 @@ void cgroup_migrate_add_src(struct css_s
 
 	src_cgrp = cset_cgroup_from_root(src_cset, dst_cgrp->root);
 
-	if (!list_empty(&src_cset->mg_preload_node))
+	if (!list_empty(&src_cset->mg_src_preload_node))
 		return;
 
 	WARN_ON(src_cset->mg_src_cgrp);
@@ -2623,7 +2631,7 @@ void cgroup_migrate_add_src(struct css_s
 	src_cset->mg_src_cgrp = src_cgrp;
 	src_cset->mg_dst_cgrp = dst_cgrp;
 	get_css_set(src_cset);
-	list_add_tail(&src_cset->mg_preload_node, &mgctx->preloaded_src_csets);
+	list_add_tail(&src_cset->mg_src_preload_node, &mgctx->preloaded_src_csets);
 }
 
 /**
@@ -2648,7 +2656,7 @@ int cgroup_migrate_prepare_dst(struct cg
 
 	/* look up the dst cset for each src cset and link it to src */
 	list_for_each_entry_safe(src_cset, tmp_cset, &mgctx->preloaded_src_csets,
-				 mg_preload_node) {
+				 mg_src_preload_node) {
 		struct css_set *dst_cset;
 		struct cgroup_subsys *ss;
 		int ssid;
@@ -2667,7 +2675,7 @@ int cgroup_migrate_prepare_dst(struct cg
 		if (src_cset == dst_cset) {
 			src_cset->mg_src_cgrp = NULL;
 			src_cset->mg_dst_cgrp = NULL;
-			list_del_init(&src_cset->mg_preload_node);
+			list_del_init(&src_cset->mg_src_preload_node);
 			put_css_set(src_cset);
 			put_css_set(dst_cset);
 			continue;
@@ -2675,8 +2683,8 @@ int cgroup_migrate_prepare_dst(struct cg
 
 		src_cset->mg_dst_cset = dst_cset;
 
-		if (list_empty(&dst_cset->mg_preload_node))
-			list_add_tail(&dst_cset->mg_preload_node,
+		if (list_empty(&dst_cset->mg_dst_preload_node))
+			list_add_tail(&dst_cset->mg_dst_preload_node,
 				      &mgctx->preloaded_dst_csets);
 		else
 			put_css_set(dst_cset);
@@ -2922,7 +2930,8 @@ static int cgroup_update_dfl_csses(struc
 		goto out_finish;
 
 	spin_lock_irq(&css_set_lock);
-	list_for_each_entry(src_cset, &mgctx.preloaded_src_csets, mg_preload_node) {
+	list_for_each_entry(src_cset, &mgctx.preloaded_src_csets,
+			    mg_src_preload_node) {
 		struct task_struct *task, *ntask;
 
 		/* all tasks in src_csets need to be migrated */
author maintainer
#17 lore raw

PATCH 17/112 btrfs: return -EAGAIN for NOWAIT dio reads/writes on compressed and inline extents

In reply to Greg Kroah-Hartman

From: Filipe Manana <[email protected]>

commit a4527e1853f8ff6e0b7c2dadad6268bd38427a31 upstream.

When doing a direct IO read or write, we always return -ENOTBLK when we find a compressed extent (or an inline extent) so that we fallback to buffered IO. This however is not ideal in case we are in a NOWAIT context (io_uring for example), because buffered IO can block and we currently have no support for NOWAIT semantics for buffered IO, so if we need to fallback to buffered IO we should first signal the caller that we may need to block by returning -EAGAIN instead.

This behaviour can also result in short reads being returned to user space, which although it's not incorrect and user space should be able to deal with partial reads, it's somewhat surprising and even some popular applications like QEMU (Link tag #1) and MariaDB (Link tag #2) don't deal with short reads properly (or at all).

The short read case happens when we try to read from a range that has a non-compressed and non-inline extent followed by a compressed extent. After having read the first extent, when we find the compressed extent we return -ENOTBLK from btrfs_dio_iomap_begin(), which results in iomap to treat the request as a short read, returning 0 (success) and waiting for previously submitted bios to complete (this happens at fs/iomap/direct-io.c:__iomap_dio_rw()). After that, and while at btrfs_file_read_iter(), we call filemap_read() to use buffered IO to read the remaining data, and pass it the number of bytes we were able to read with direct IO. Than at filemap_read() if we get a page fault error when accessing the read buffer, we return a partial read instead of an -EFAULT error, because the number of bytes previously read is greater than zero.

So fix this by returning -EAGAIN for NOWAIT direct IO when we find a compressed or an inline extent.

---
 fs/btrfs/inode.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
fs/btrfs/inode.c +13 -1
@@ -7480,7 +7480,19 @@ static int btrfs_dio_iomap_begin(struct
 	if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags) ||
 	    em->block_start == EXTENT_MAP_INLINE) {
 		free_extent_map(em);
-		ret = -ENOTBLK;
+		/*
+		 * If we are in a NOWAIT context, return -EAGAIN in order to
+		 * fallback to buffered IO. This is not only because we can
+		 * block with buffered IO (no support for NOWAIT semantics at
+		 * the moment) but also to avoid returning short reads to user
+		 * space - this happens if we were able to read some data from
+		 * previous non-compressed extents and then when we fallback to
+		 * buffered IO, at btrfs_file_read_iter() by calling
+		 * filemap_read(), we fail to fault in pages for the read buffer,
+		 * in which case filemap_read() returns a short read (the number
+		 * of bytes previously read is > 0, so it does not return -EFAULT).
+		 */
+		ret = (flags & IOMAP_NOWAIT) ? -EAGAIN : -ENOTBLK;
 		goto unlock_err;
 	}
 
author maintainer
#18 lore raw

PATCH 18/112 drm/panfrost: Put mapping instead of shmem obj on panfrost_mmu_map_fault_addr() error

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

commit fb6e0637ab7ebd8e61fe24f4d663c4bae99cfa62 upstream.

When panfrost_mmu_map_fault_addr() fails, the BO's mapping should be unreferenced and not the shmem object which backs the mapping.

---
 drivers/gpu/drm/panfrost/panfrost_mmu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/panfrost/panfrost_mmu.c +1 -1
@@ -491,7 +491,7 @@ err_map:
 err_pages:
 	drm_gem_shmem_put_pages(&bo->base);
 err_bo:
-	drm_gem_object_put(&bo->base.base);
+	panfrost_gem_mapping_put(bomapping);
 	return ret;
 }
 
author maintainer
#19 lore raw

PATCH 19/112 drm/panfrost: Fix shrinker list corruption by madvise IOCTL

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

commit 9fc33eaaa979d112d10fea729edcd2a2e21aa912 upstream.

Calling madvise IOCTL twice on BO causes memory shrinker list corruption and crashes kernel because BO is already on the list and it's added to the list again, while BO should be removed from the list before it's re-added. Fix it.

---
 drivers/gpu/drm/panfrost/panfrost_drv.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/panfrost/panfrost_drv.c +2 -2
@@ -427,8 +427,8 @@ static int panfrost_ioctl_madvise(struct
 
 	if (args->retained) {
 		if (args->madv == PANFROST_MADV_DONTNEED)
-			list_add_tail(&bo->base.madv_list,
-				      &pfdev->shrinker_list);
+			list_move_tail(&bo->base.madv_list,
+				       &pfdev->shrinker_list);
 		else if (args->madv == PANFROST_MADV_WILLNEED)
 			list_del_init(&bo->base.madv_list);
 	}
author maintainer
#20 lore raw

PATCH 20/112 fs/remap: constrain dedupe of EOF blocks

In reply to Greg Kroah-Hartman

From: Dave Chinner <[email protected]>

commit 5750676b64a561f7ec920d7c6ba130fc9c7378f3 upstream.

If dedupe of an EOF block is not constrainted to match against only other EOF blocks with the same EOF offset into the block, it can match against any other block that has the same matching initial bytes in it, even if the bytes beyond EOF in the source file do not match.

Fix this by constraining the EOF block matching to only match against other EOF blocks that have identical EOF offsets and data. This allows "whole file dedupe" to continue to work without allowing eof blocks to randomly match against partial full blocks with the same data.

---
 fs/remap_range.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/remap_range.c +2 -1
@@ -71,7 +71,8 @@ static int generic_remap_checks(struct f
 	 * Otherwise, make sure the count is also block-aligned, having
 	 * already confirmed the starting offsets' block alignment.
 	 */
-	if (pos_in + count == size_in) {
+	if (pos_in + count == size_in &&
+	    (!(remap_flags & REMAP_FILE_DEDUP) || pos_out + count == size_out)) {
 		bcount = ALIGN(size_in, bs) - pos_in;
 	} else {
 		if (!IS_ALIGNED(count, bs))
author maintainer
#21 lore raw

PATCH 21/112 nilfs2: fix incorrect masking of permission flags for symlinks

In reply to Greg Kroah-Hartman

From: Ryusuke Konishi <[email protected]>

commit 5924e6ec1585445f251ea92713eb15beb732622a upstream.

The permission flags of newly created symlinks are wrongly dropped on nilfs2 with the current umask value even though symlinks should have 777 (rwxrwxrwx) permissions:

 $ umask
 0022
 $ touch file && ln -s file symlink; ls -l file symlink
 -rw-r--r--. 1 root root 0 Jun 23 16:29 file
 lrwxr-xr-x. 1 root root 4 Jun 23 16:29 symlink -> file

This fixes the bug by inserting a missing check that excludes symlinks.

---
 fs/nilfs2/nilfs.h |    3 +++
 1 file changed, 3 insertions(+)
fs/nilfs2/nilfs.h +3 -0
@@ -198,6 +198,9 @@ static inline int nilfs_acl_chmod(struct
 
 static inline int nilfs_init_acl(struct inode *inode, struct inode *dir)
 {
+	if (S_ISLNK(inode->i_mode))
+		return 0;
+
 	inode->i_mode &= ~current_umask();
 	return 0;
 }
author maintainer
#22 lore raw

PATCH 22/112 sh: convert nommu io{re,un}map() to static inline functions

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

commit d684e0a52d36f8939eda30a0f31ee235ee4ee741 upstream.

Recently, nommu iounmap() was converted from a static inline function to a macro again, basically reverting commit 4580ba4ad2e6b8dd ("sh: Convert iounmap() macros to inline functions"). With -Werror, this leads to build failures like:

drivers/iio/adc/xilinx-ams.c: In function `ams_iounmap_ps':
drivers/iio/adc/xilinx-ams.c:1195:14: error: unused variable `ams' [-Werror=unused-variable]
1195 | struct ams *ams = data;
| ^~~

Fix this by replacing the macros for ioremap() and iounmap() by static inline functions, based on <asm-generic/io.h>.

---
 arch/sh/include/asm/io.h |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
arch/sh/include/asm/io.h +6 -2
@@ -271,8 +271,12 @@ static inline void __iomem *ioremap_prot
 #endif /* CONFIG_HAVE_IOREMAP_PROT */
 
 #else /* CONFIG_MMU */
-#define iounmap(addr)		do { } while (0)
-#define ioremap(offset, size)	((void __iomem *)(unsigned long)(offset))
+static inline void __iomem *ioremap(phys_addr_t offset, size_t size)
+{
+	return (void __iomem *)(unsigned long)offset;
+}
+
+static inline void iounmap(volatile void __iomem *addr) { }
 #endif /* CONFIG_MMU */
 
 #define ioremap_uc	ioremap
author maintainer
#23 lore raw

PATCH 23/112 Revert "evm: Fix memleak in init_desc"

In reply to Greg Kroah-Hartman

From: Xiu Jianfeng <[email protected]>

commit 51dd64bb99e4478fc5280171acd8e1b529eadaf7 upstream.

This reverts commit ccf11dbaa07b328fa469415c362d33459c140a37.

Commit ccf11dbaa07b ("evm: Fix memleak in init_desc") said there is memleak in init_desc. That may be incorrect, as we can see, tmp_tfm is saved in one of the two global variables hmac_tfm or evm_tfm[hash_algo], then if init_desc is called next time, there is no need to alloc tfm again, so in the error path of kmalloc desc or crypto_shash_init(desc), It is not a problem without freeing tmp_tfm.

And also that commit did not reset the global variable to NULL after freeing tmp_tfm and this makes *tfm a dangling pointer which may cause a UAF issue.

---
 security/integrity/evm/evm_crypto.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)
security/integrity/evm/evm_crypto.c +2 -5
@@ -73,7 +73,7 @@ static struct shash_desc *init_desc(char
 {
 	long rc;
 	const char *algo;
-	struct crypto_shash **tfm, *tmp_tfm = NULL;
+	struct crypto_shash **tfm, *tmp_tfm;
 	struct shash_desc *desc;
 
 	if (type == EVM_XATTR_HMAC) {
@@ -118,16 +118,13 @@ unlock:
 alloc:
 	desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(*tfm),
 			GFP_KERNEL);
-	if (!desc) {
-		crypto_free_shash(tmp_tfm);
+	if (!desc)
 		return ERR_PTR(-ENOMEM);
-	}
 
 	desc->tfm = *tfm;
 
 	rc = crypto_shash_init(desc);
 	if (rc) {
-		crypto_free_shash(tmp_tfm);
 		kfree(desc);
 		return ERR_PTR(rc);
 	}
author maintainer
#24 lore raw

PATCH 24/112 ext4: fix race condition between ext4_write and ext4_convert_inline_data

In reply to Greg Kroah-Hartman

From: Baokun Li <[email protected]>

commit f87c7a4b084afc13190cbb263538e444cb2b392a upstream.

Hulk Robot reported a BUG_ON:
==================================================================
EXT4-fs error (device loop3): ext4_mb_generate_buddy:805: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free clusters kernel BUG at fs/ext4/ext4_jbd2.c:53!
invalid opcode: 0000 [#1] SMP KASAN PTI

 CPU: 0 PID: 25371 Comm: syz-executor.3 Not tainted 5.10.0+ #1
 RIP: 0010:ext4_put_nojournal fs/ext4/ext4_jbd2.c:53 [inline]
 RIP: 0010:__ext4_journal_stop+0x10e/0x110 fs/ext4/ext4_jbd2.c:116
 [...]
 Call Trace:
  ext4_write_inline_data_end+0x59a/0x730 fs/ext4/inline.c:795
  generic_perform_write+0x279/0x3c0 mm/filemap.c:3344
  ext4_buffered_write_iter+0x2e3/0x3d0 fs/ext4/file.c:270
  ext4_file_write_iter+0x30a/0x11c0 fs/ext4/file.c:520
  do_iter_readv_writev+0x339/0x3c0 fs/read_write.c:732
  do_iter_write+0x107/0x430 fs/read_write.c:861
  vfs_writev fs/read_write.c:934 [inline]
  do_pwritev+0x1e5/0x380 fs/read_write.c:1031
 [...]
 ==================================================================

Above issue may happen as follows:
cpu1 cpu2
__________________________|__________________________ do_pwritev
vfs_writev
do_iter_write
ext4_file_write_iter

    ext4_buffered_write_iter
     generic_perform_write
      ext4_da_write_begin
                           vfs_fallocate
                            ext4_fallocate
                             ext4_convert_inline_data
                              ext4_convert_inline_data_nolock
                               ext4_destroy_inline_data_nolock
                                clear EXT4_STATE_MAY_INLINE_DATA
                               ext4_map_blocks
                                ext4_ext_map_blocks
                                 ext4_mb_new_blocks
                                  ext4_mb_regular_allocator
                                   ext4_mb_good_group_nolock
                                    ext4_mb_init_group
                                     ext4_mb_init_cache
                                      ext4_mb_generate_buddy  --> error
       ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
                                ext4_restore_inline_data
                                 set EXT4_STATE_MAY_INLINE_DATA
       ext4_block_write_begin
      ext4_da_write_end
       ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
       ext4_write_inline_data_end
        handle=NULL
        ext4_journal_stop(handle)
         __ext4_journal_stop
          ext4_put_nojournal(handle)
           ref_cnt = (unsigned long)handle
           BUG_ON(ref_cnt == 0)  ---> BUG_ON

The lock held by ext4_convert_inline_data is xattr_sem, but the lock held by generic_perform_write is i_rwsem. Therefore, the two locks can be concurrent.

To solve above issue, we add inode_lock() for ext4_convert_inline_data(). At the same time, move ext4_convert_inline_data() in front of ext4_punch_hole(), remove similar handling from ext4_punch_hole().

---
 fs/ext4/extents.c |    9 +++++----
 fs/ext4/inode.c   |    9 ---------
 2 files changed, 5 insertions(+), 13 deletions(-)
fs/ext4/extents.c +5 -4
@@ -4691,16 +4691,17 @@ long ext4_fallocate(struct file *file, i
 		return -EOPNOTSUPP;
 
 	ext4_fc_start_update(inode);
+	inode_lock(inode);
+	ret = ext4_convert_inline_data(inode);
+	inode_unlock(inode);
+	if (ret)
+		goto exit;
 
 	if (mode & FALLOC_FL_PUNCH_HOLE) {
 		ret = ext4_punch_hole(file, offset, len);
 		goto exit;
 	}
 
-	ret = ext4_convert_inline_data(inode);
-	if (ret)
-		goto exit;
-
 	if (mode & FALLOC_FL_COLLAPSE_RANGE) {
 		ret = ext4_collapse_range(file, offset, len);
 		goto exit;
fs/ext4/inode.c +0 -9
@@ -4042,15 +4042,6 @@ int ext4_punch_hole(struct file *file, l
 
 	trace_ext4_punch_hole(inode, offset, length, 0);
 
-	ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
-	if (ext4_has_inline_data(inode)) {
-		down_write(&EXT4_I(inode)->i_mmap_sem);
-		ret = ext4_convert_inline_data(inode);
-		up_write(&EXT4_I(inode)->i_mmap_sem);
-		if (ret)
-			return ret;
-	}
-
 	/*
 	 * Write out all dirty pages to avoid race conditions
 	 * Then release them.
author maintainer
#25 lore raw

PATCH 25/112 ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count

In reply to Greg Kroah-Hartman

From: Kris Bahnsen <[email protected]>

[ Upstream commit e95ea0f687e679fcb0a3a67d0755b81ee7d60db0 ]

Device-tree incorrectly used "ngpio" which caused the driver to fallback to 32 ngpios.

This platform has 62 GPIO registers.

Fixes 9ff8e9fccef9 ("ARM: dts: TS-7970: add basic device tree")
---
 arch/arm/boot/dts/imx6qdl-ts7970.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/imx6qdl-ts7970.dtsi +1 -1
index e6aa0c33754d..966038ecc5bf 100644
@@ -226,7 +226,7 @@ gpio8: gpio@28 {
 		reg = <0x28>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		ngpio = <32>;
+		ngpios = <62>;
 	};
 
 	sgtl5000: codec@a {
Signature · 1 line
2.35.1
author maintainer
#26 lore raw

PATCH 26/112 spi: amd: Limit max transfer and message size

In reply to Greg Kroah-Hartman

From: Cristian Ciocaltea <[email protected]>

[ Upstream commit 6ece49c56965544262523dae4a071ace3db63507 ]

Enabling the SPI CS35L41 audio codec driver for Steam Deck [1] revealed a problem with the current AMD SPI controller driver implementation, consisting of an unrecoverable system hang.

The issue can be prevented if we ensure the max transfer size and the max message size do not exceed the FIFO buffer size.

According to the implementation of the downstream driver, the AMD SPI controller is not able to handle more than 70 bytes per transfer, which corresponds to the size of the FIFO buffer.

Hence, let's fix this by setting the SPI limits mentioned above.

[1] https://lore.kernel.org/r/[email protected]

Fixes bbb336f39efc ("spi: spi-amd: Add AMD SPI controller driver support")
---
 drivers/spi/spi-amd.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/spi/spi-amd.c +8 -0
index 7f629544060d..a027cfd49df8 100644
@@ -28,6 +28,7 @@
 #define AMD_SPI_RX_COUNT_REG	0x4B
 #define AMD_SPI_STATUS_REG	0x4C
 
+#define AMD_SPI_FIFO_SIZE	70
 #define AMD_SPI_MEM_SIZE	200
 
 /* M_CMD OP codes for SPI */
@@ -245,6 +246,11 @@ static int amd_spi_master_transfer(struct spi_master *master,
 	return 0;
 }
 
+static size_t amd_spi_max_transfer_size(struct spi_device *spi)
+{
+	return AMD_SPI_FIFO_SIZE;
+}
+
 static int amd_spi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -278,6 +284,8 @@ static int amd_spi_probe(struct platform_device *pdev)
 	master->flags = SPI_MASTER_HALF_DUPLEX;
 	master->setup = amd_spi_master_setup;
 	master->transfer_one_message = amd_spi_master_transfer;
+	master->max_transfer_size = amd_spi_max_transfer_size;
+	master->max_message_size = amd_spi_max_transfer_size;
 
 	/* Register the controller with SPI framework */
 	err = devm_spi_register_master(dev, master);
Signature · 1 line
2.35.1
author maintainer
#27 lore raw

PATCH 27/112 ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle

In reply to Greg Kroah-Hartman

From: Ard Biesheuvel <[email protected]>

[ Upstream commit 0609e200246bfd3b7516091c491bec4308349055 ]

Jon reports that the Spectre-BHB init code is filling up the kernel log with spurious notifications about which mitigation has been enabled, every time any CPU comes out of a low power state.

Given that Spectre-BHB mitigations are system wide, only a single mitigation can be enabled, and we already print an error if two types of CPUs coexist in a single system that require different Spectre-BHB mitigations.

This means that the pr_info() that describes the selected mitigation does not need to be emitted for each CPU anyway, and so we can simply emit it only once.

In order to clarify the above in the log message, update it to describe that the selected mitigation will be enabled on all CPUs, including ones that are unaffected. If another CPU comes up later that is affected and requires a different mitigation, we report an error as before.

Fixes b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
---
 arch/arm/mm/proc-v7-bugs.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/mm/proc-v7-bugs.c +3 -3
index f9730eba0632..8bc7a2d6d6c7 100644
@@ -208,10 +208,10 @@ static int spectre_bhb_install_workaround(int method)
 			return SPECTRE_VULNERABLE;
 
 		spectre_bhb_method = method;
-	}
 
-	pr_info("CPU%u: Spectre BHB: using %s workaround\n",
-		smp_processor_id(), spectre_bhb_method_name(method));
+		pr_info("CPU%u: Spectre BHB: enabling %s workaround for all CPUs\n",
+			smp_processor_id(), spectre_bhb_method_name(method));
+	}
 
 	return SPECTRE_MITIGATED;
 }
Signature · 1 line
2.35.1
author maintainer
#28 lore raw

PATCH 28/112 ARM: 9210/1: Mark the FDT_FIXED sections as shareable

In reply to Greg Kroah-Hartman

From: Zhen Lei <[email protected]>

[ Upstream commit 598f0a99fa8a35be44b27106b43ddc66417af3b1 ]

commit 7a1be318f579 ("ARM: 9012/1: move device tree mapping out of linear region") use FDT_FIXED_BASE to map the whole FDT_FIXED_SIZE memory area which contains fdt. But it only reserves the exact physical memory that fdt occupied. Unfortunately, this mapping is non-shareable. An illegal or speculative read access can bring the RAM content from non-fdt zone into cache, PIPT makes it to be hit by subsequently read access through shareable mapping(such as linear mapping), and the cache consistency between cores is lost due to non-shareable property.

|<---------FDT_FIXED_SIZE------>|
|                               |

-------------------------------
| <non-fdt> | <fdt> | <non-fdt> |
-------------------------------

1. CoreA read <non-fdt> through MT_ROM mapping, the old data is loaded into the cache.
2. CoreB write <non-fdt> to update data through linear mapping. CoreA received the notification to invalid the corresponding cachelines, but the property non-shareable makes it to be ignored.
3. CoreA read <non-fdt> through linear mapping, cache hit, the old data is read.

To eliminate this risk, add a new memory type MT_MEMORY_RO. Compared to MT_ROM, it is shareable and non-executable.

Here's an example:
list_del corruption. prev->next should be c0ecbf74, but was c08410dc kernel BUG at lib/list_debug.c:53!
... ...
PC is at __list_del_entry_valid+0x58/0x98
LR is at __list_del_entry_valid+0x58/0x98
psr: 60000093

  sp : c0ecbf30  ip : 00000000  fp : 00000001
  r10: c08410d0  r9 : 00000001  r8 : c0825e0c
  r7 : 20000013  r6 : c08410d0  r5 : c0ecbf74  r4 : c0ecbf74
  r3 : c0825d08  r2 : 00000000  r1 : df7ce6f4  r0 : 00000044
  ... ...
  Stack: (0xc0ecbf30 to 0xc0ecc000)
  bf20:                                     c0ecbf74 c0164fd0 c0ecbf70 c0165170
  bf40: c0eca000 c0840c00 c0840c00 c0824500 c0825e0c c0189bbc c088f404 60000013
  bf60: 60000013 c0e85100 000004ec 00000000 c0ebcdc0 c0ecbf74 c0ecbf74 c0825d08
  ... ...                                           <  next     prev  >
  (__list_del_entry_valid) from (__list_del_entry+0xc/0x20)
  (__list_del_entry) from (finish_swait+0x60/0x7c)
  (finish_swait) from (rcu_gp_kthread+0x560/0xa20)
  (rcu_gp_kthread) from (kthread+0x14c/0x15c)
  (kthread) from (ret_from_fork+0x14/0x24)

The faulty list node to be deleted is a local variable, its address is c0ecbf74. The dumped stack shows that 'prev' = c0ecbf74, but its value before lib/list_debug.c:53 is c08410dc. A large amount of printing results in swapping out the cacheline containing the old data(MT_ROM mapping is read only, so the cacheline cannot be dirty), and the subsequent dump operation obtains new data from the DDR.

Fixes 7a1be318f579 ("ARM: 9012/1: move device tree mapping out of linear region")
---
 arch/arm/include/asm/mach/map.h |  1 +
 arch/arm/mm/mmu.c               | 15 ++++++++++++++-
 2 files changed, 15 insertions(+), 1 deletion(-)
arch/arm/include/asm/mach/map.h +1 -0
index 92282558caf7..2b8970d8e5a2 100644
@@ -27,6 +27,7 @@ enum {
 	MT_HIGH_VECTORS,
 	MT_MEMORY_RWX,
 	MT_MEMORY_RW,
+	MT_MEMORY_RO,
 	MT_ROM,
 	MT_MEMORY_RWX_NONCACHED,
 	MT_MEMORY_RW_DTCM,
arch/arm/mm/mmu.c +14 -1
index 3e3001998460..86f213f1b44b 100644
@@ -296,6 +296,13 @@ static struct mem_type mem_types[] __ro_after_init = {
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
+	[MT_MEMORY_RO] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+			     L_PTE_XN | L_PTE_RDONLY,
+		.prot_l1   = PMD_TYPE_TABLE,
+		.prot_sect = PMD_TYPE_SECT,
+		.domain    = DOMAIN_KERNEL,
+	},
 	[MT_ROM] = {
 		.prot_sect = PMD_TYPE_SECT,
 		.domain    = DOMAIN_KERNEL,
@@ -490,6 +497,7 @@ static void __init build_mem_type_table(void)
 
 			/* Also setup NX memory mapping */
 			mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_XN;
+			mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_XN;
 		}
 		if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
 			/*
@@ -569,6 +577,7 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+		mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 #endif
 
 		/*
@@ -588,6 +597,8 @@ static void __init build_mem_type_table(void)
 			mem_types[MT_MEMORY_RWX].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_S;
 			mem_types[MT_MEMORY_RW].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_S;
+			mem_types[MT_MEMORY_RO].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_S;
 			mem_types[MT_MEMORY_RWX_NONCACHED].prot_pte |= L_PTE_SHARED;
@@ -648,6 +659,8 @@ static void __init build_mem_type_table(void)
 	mem_types[MT_MEMORY_RWX].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_RW].prot_sect |= ecc_mask | cp->pmd;
 	mem_types[MT_MEMORY_RW].prot_pte |= kern_pgprot;
+	mem_types[MT_MEMORY_RO].prot_sect |= ecc_mask | cp->pmd;
+	mem_types[MT_MEMORY_RO].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= ecc_mask;
 	mem_types[MT_ROM].prot_sect |= cp->pmd;
@@ -1342,7 +1355,7 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
 		map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
 		map.virtual = FDT_FIXED_BASE;
 		map.length = FDT_FIXED_SIZE;
-		map.type = MT_ROM;
+		map.type = MT_MEMORY_RO;
 		create_mapping(&map);
 	}
 
Signature · 1 line
2.35.1
author maintainer
#29 lore raw

PATCH 29/112 net/mlx5e: kTLS, Fix build time constant test in TX

In reply to Greg Kroah-Hartman

From: Tariq Toukan <[email protected]>

[ Upstream commit 6cc2714e85754a621219693ea8aa3077d6fca0cb ]

Use the correct constant (TLS_DRIVER_STATE_SIZE_TX) in the comparison against the size of the private TX TLS driver context.

Fixes df8d866770f9 ("net/mlx5e: kTLS, Use kernel API to extract private offload context")
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c +1 -2
index b140e13fdcc8..679747db3110 100644
@@ -63,8 +63,7 @@ mlx5e_set_ktls_tx_priv_ctx(struct tls_context *tls_ctx,
 	struct mlx5e_ktls_offload_context_tx **ctx =
 		__tls_driver_ctx(tls_ctx, TLS_OFFLOAD_CTX_DIR_TX);
 
-	BUILD_BUG_ON(sizeof(struct mlx5e_ktls_offload_context_tx *) >
-		     TLS_OFFLOAD_CONTEXT_SIZE_TX);
+	BUILD_BUG_ON(sizeof(priv_tx) > TLS_DRIVER_STATE_SIZE_TX);
 
 	*ctx = priv_tx;
 }
Signature · 1 line
2.35.1
author maintainer
#30 lore raw

PATCH 30/112 net/mlx5e: kTLS, Fix build time constant test in RX

In reply to Greg Kroah-Hartman

From: Tariq Toukan <[email protected]>

[ Upstream commit 2ec6cf9b742a5c18982861322fa5de6510f8f57e ]

Use the correct constant (TLS_DRIVER_STATE_SIZE_RX) in the comparison against the size of the private RX TLS driver context.

Fixes 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c +1 -2
index d06532d0baa4..634777fd7db9 100644
@@ -231,8 +231,7 @@ mlx5e_set_ktls_rx_priv_ctx(struct tls_context *tls_ctx,
 	struct mlx5e_ktls_offload_context_rx **ctx =
 		__tls_driver_ctx(tls_ctx, TLS_OFFLOAD_CTX_DIR_RX);
 
-	BUILD_BUG_ON(sizeof(struct mlx5e_ktls_offload_context_rx *) >
-		     TLS_OFFLOAD_CONTEXT_SIZE_RX);
+	BUILD_BUG_ON(sizeof(priv_rx) > TLS_DRIVER_STATE_SIZE_RX);
 
 	*ctx = priv_rx;
 }
Signature · 1 line
2.35.1
author maintainer
#31 lore raw

PATCH 31/112 net/mlx5e: Fix capability check for updating vnic env counters

In reply to Greg Kroah-Hartman

From: Gal Pressman <[email protected]>

[ Upstream commit 452133dd580811f184e76b1402983182ee425298 ]

The existing capability check for vnic env counters only checks for receive steering discards, although we need the counters update for the exposed internal queue oob counter as well. This could result in the latter counter not being updated correctly when the receive steering discards counter is not supported.
Fix that by checking whether any counter is supported instead of only the steering counter capability.

Fixes 0cfafd4b4ddf ("net/mlx5e: Add device out of buffer counter")
---
 drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en_stats.c +1 -1
index 78f6a6f0a7e0..ff4f10d0f090 100644
@@ -536,7 +536,7 @@ static MLX5E_DECLARE_STATS_GRP_OP_UPDATE_STATS(vnic_env)
 	u32 in[MLX5_ST_SZ_DW(query_vnic_env_in)] = {};
 	struct mlx5_core_dev *mdev = priv->mdev;
 
-	if (!MLX5_CAP_GEN(priv->mdev, nic_receive_steering_discard))
+	if (!mlx5e_stats_grp_vnic_env_num_stats(priv))
 		return;
 
 	MLX5_SET(query_vnic_env_in, in, opcode, MLX5_CMD_OP_QUERY_VNIC_ENV);
Signature · 1 line
2.35.1
author maintainer
#32 lore raw

PATCH 32/112 drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()

In reply to Greg Kroah-Hartman

From: Hangyu Hua <[email protected]>

[ Upstream commit 85144df9ff4652816448369de76897c57cbb1b93 ]

If drm_connector_init fails, intel_connector_free will be called to take care of proper free. So it is necessary to drop the refcount of port before intel_connector_free.

Fixes 091a4f91942a ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector")
(cherry picked from commit cea9ed611e85d36a05db52b6457bf584b7d969e2)
---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +1 -0
index ecaa538b2d35..ef7878193491 100644
@@ -790,6 +790,7 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
 	ret = drm_connector_init(dev, connector, &intel_dp_mst_connector_funcs,
 				 DRM_MODE_CONNECTOR_DisplayPort);
 	if (ret) {
+		drm_dp_mst_put_port_malloc(port);
 		intel_connector_free(intel_connector);
 		return NULL;
 	}
Signature · 1 line
2.35.1
author maintainer
#33 lore raw

PATCH 33/112 ima: Fix a potential integer overflow in ima_appraise_measurement

In reply to Greg Kroah-Hartman

From: Huaxin Lu <[email protected]>

[ Upstream commit d2ee2cfc4aa85ff6a2a3b198a3a524ec54e3d999 ]

When the ima-modsig is enabled, the rc passed to evm_verifyxattr() may be negative, which may cause the integer overflow problem.

Fixes 39b07096364a ("ima: Implement support for module-style appended signatures")
---
 security/integrity/ima/ima_appraise.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
security/integrity/ima/ima_appraise.c +2 -1
index 3dd8c2e4314e..7122a359a268 100644
@@ -396,7 +396,8 @@ int ima_appraise_measurement(enum ima_hooks func,
 		goto out;
 	}
 
-	status = evm_verifyxattr(dentry, XATTR_NAME_IMA, xattr_value, rc, iint);
+	status = evm_verifyxattr(dentry, XATTR_NAME_IMA, xattr_value,
+				 rc < 0 ? 0 : rc, iint);
 	switch (status) {
 	case INTEGRITY_PASS:
 	case INTEGRITY_PASS_IMMUTABLE:
Signature · 1 line
2.35.1
author maintainer
#34 lore raw

PATCH 34/112 ASoC: sgtl5000: Fix noise on shutdown/remove

In reply to Greg Kroah-Hartman

From: Francesco Dolcini <[email protected]>

[ Upstream commit 040e3360af3736348112d29425bf5d0be5b93115 ]

Put the SGTL5000 in a silent/safe state on shutdown/remove, this is required since the SGTL5000 produces a constant noise on its output after it is configured and its clock is removed. Without this change this is happening every time the module is unbound/removed or from reboot till the clock is enabled again.

The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can be easily reproduced everywhere just playing something on the codec and after that removing/unbinding the driver.

---
 sound/soc/codecs/sgtl5000.c | 9 +++++++++
 sound/soc/codecs/sgtl5000.h | 1 +
 2 files changed, 10 insertions(+)
sound/soc/codecs/sgtl5000.c +9 -0
index 4c0e87e22b97..f066e016a874 100644
@@ -1797,6 +1797,9 @@ static int sgtl5000_i2c_remove(struct i2c_client *client)
 {
 	struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
 
+	regmap_write(sgtl5000->regmap, SGTL5000_CHIP_DIG_POWER, SGTL5000_DIG_POWER_DEFAULT);
+	regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, SGTL5000_ANA_POWER_DEFAULT);
+
 	clk_disable_unprepare(sgtl5000->mclk);
 	regulator_bulk_disable(sgtl5000->num_supplies, sgtl5000->supplies);
 	regulator_bulk_free(sgtl5000->num_supplies, sgtl5000->supplies);
@@ -1804,6 +1807,11 @@ static int sgtl5000_i2c_remove(struct i2c_client *client)
 	return 0;
 }
 
+static void sgtl5000_i2c_shutdown(struct i2c_client *client)
+{
+	sgtl5000_i2c_remove(client);
+}
+
 static const struct i2c_device_id sgtl5000_id[] = {
 	{"sgtl5000", 0},
 	{},
@@ -1824,6 +1832,7 @@ static struct i2c_driver sgtl5000_i2c_driver = {
 		   },
 	.probe = sgtl5000_i2c_probe,
 	.remove = sgtl5000_i2c_remove,
+	.shutdown = sgtl5000_i2c_shutdown,
 	.id_table = sgtl5000_id,
 };
 
sound/soc/codecs/sgtl5000.h +1 -0
index 56ec5863f250..3a808c762299 100644
@@ -80,6 +80,7 @@
 /*
  * SGTL5000_CHIP_DIG_POWER
  */
+#define SGTL5000_DIG_POWER_DEFAULT		0x0000
 #define SGTL5000_ADC_EN				0x0040
 #define SGTL5000_DAC_EN				0x0020
 #define SGTL5000_DAP_POWERUP			0x0010
Signature · 1 line
2.35.1
author maintainer
#35 lore raw

PATCH 35/112 ASoC: tas2764: Add post reset delays

In reply to Greg Kroah-Hartman

From: Martin Povišer <[email protected]>

[ Upstream commit cd10bb89b0d57bca98eb75e0444854a1c129a14e ]

Make sure there is at least 1 ms delay from reset to first command as is specified in the datasheet. This is a fix similar to commit 307f31452078 ("ASoC: tas2770: Insert post reset delay").

Fixes 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
---
 sound/soc/codecs/tas2764.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
sound/soc/codecs/tas2764.c +8 -2
index 14a193e48dc7..d8e79cc2cd1d 100644
@@ -42,10 +42,12 @@ static void tas2764_reset(struct tas2764_priv *tas2764)
 		gpiod_set_value_cansleep(tas2764->reset_gpio, 0);
 		msleep(20);
 		gpiod_set_value_cansleep(tas2764->reset_gpio, 1);
+		usleep_range(1000, 2000);
 	}
 
 	snd_soc_component_write(tas2764->component, TAS2764_SW_RST,
 				TAS2764_RST);
+	usleep_range(1000, 2000);
 }
 
 static int tas2764_set_bias_level(struct snd_soc_component *component,
@@ -107,8 +109,10 @@ static int tas2764_codec_resume(struct snd_soc_component *component)
 	struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component);
 	int ret;
 
-	if (tas2764->sdz_gpio)
+	if (tas2764->sdz_gpio) {
 		gpiod_set_value_cansleep(tas2764->sdz_gpio, 1);
+		usleep_range(1000, 2000);
+	}
 
 	ret = snd_soc_component_update_bits(component, TAS2764_PWR_CTRL,
 					    TAS2764_PWR_CTRL_MASK,
@@ -501,8 +505,10 @@ static int tas2764_codec_probe(struct snd_soc_component *component)
 
 	tas2764->component = component;
 
-	if (tas2764->sdz_gpio)
+	if (tas2764->sdz_gpio) {
 		gpiod_set_value_cansleep(tas2764->sdz_gpio, 1);
+		usleep_range(1000, 2000);
+	}
 
 	tas2764_reset(tas2764);
 
Signature · 1 line
2.35.1
author maintainer
#36 lore raw

PATCH 36/112 ASoC: tas2764: Fix and extend FSYNC polarity handling

In reply to Greg Kroah-Hartman

From: Martin Povišer <[email protected]>

[ Upstream commit d1a10f1b48202e2d183cce144c218a211e98d906 ]

Fix setting of FSYNC polarity in case of LEFT_J and DSP_A/B formats. Do NOT set the SCFG field as was previously done, because that is not correct and is also in conflict with the "ASI1 Source" control which sets the same SCFG field!

Also add support for explicit polarity inversion.

Fixes 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
---
 sound/soc/codecs/tas2764.c | 30 +++++++++++++++++-------------
 sound/soc/codecs/tas2764.h |  6 ++----
 2 files changed, 19 insertions(+), 17 deletions(-)
sound/soc/codecs/tas2764.c +17 -13
index d8e79cc2cd1d..b93e593788f2 100644
@@ -135,7 +135,8 @@ static const char * const tas2764_ASI1_src[] = {
 };
 
 static SOC_ENUM_SINGLE_DECL(
-	tas2764_ASI1_src_enum, TAS2764_TDM_CFG2, 4, tas2764_ASI1_src);
+	tas2764_ASI1_src_enum, TAS2764_TDM_CFG2, TAS2764_TDM_CFG2_SCFG_SHIFT,
+	tas2764_ASI1_src);
 
 static const struct snd_kcontrol_new tas2764_asi1_mux =
 	SOC_DAPM_ENUM("ASI1 Source", tas2764_ASI1_src_enum);
@@ -333,20 +334,22 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
 	struct snd_soc_component *component = dai->component;
 	struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component);
-	u8 tdm_rx_start_slot = 0, asi_cfg_1 = 0;
-	int iface;
+	u8 tdm_rx_start_slot = 0, asi_cfg_0 = 0, asi_cfg_1 = 0;
 	int ret;
 
 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_IF:
+		asi_cfg_0 ^= TAS2764_TDM_CFG0_FRAME_START;
+		fallthrough;
 	case SND_SOC_DAIFMT_NB_NF:
 		asi_cfg_1 = TAS2764_TDM_CFG1_RX_RISING;
 		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		asi_cfg_0 ^= TAS2764_TDM_CFG0_FRAME_START;
+		fallthrough;
 	case SND_SOC_DAIFMT_IB_NF:
 		asi_cfg_1 = TAS2764_TDM_CFG1_RX_FALLING;
 		break;
-	default:
-		dev_err(tas2764->dev, "ASI format Inverse is not found\n");
-		return -EINVAL;
 	}
 
 	ret = snd_soc_component_update_bits(component, TAS2764_TDM_CFG1,
@@ -357,13 +360,13 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
+		asi_cfg_0 ^= TAS2764_TDM_CFG0_FRAME_START;
+		fallthrough;
 	case SND_SOC_DAIFMT_DSP_A:
-		iface = TAS2764_TDM_CFG2_SCFG_I2S;
 		tdm_rx_start_slot = 1;
 		break;
 	case SND_SOC_DAIFMT_DSP_B:
 	case SND_SOC_DAIFMT_LEFT_J:
-		iface = TAS2764_TDM_CFG2_SCFG_LEFT_J;
 		tdm_rx_start_slot = 0;
 		break;
 	default:
@@ -372,14 +375,15 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		return -EINVAL;
 	}
 
-	ret = snd_soc_component_update_bits(component, TAS2764_TDM_CFG1,
-					    TAS2764_TDM_CFG1_MASK,
-					    (tdm_rx_start_slot << TAS2764_TDM_CFG1_51_SHIFT));
+	ret = snd_soc_component_update_bits(component, TAS2764_TDM_CFG0,
+					    TAS2764_TDM_CFG0_FRAME_START,
+					    asi_cfg_0);
 	if (ret < 0)
 		return ret;
 
-	ret = snd_soc_component_update_bits(component, TAS2764_TDM_CFG2,
-					    TAS2764_TDM_CFG2_SCFG_MASK, iface);
+	ret = snd_soc_component_update_bits(component, TAS2764_TDM_CFG1,
+					    TAS2764_TDM_CFG1_MASK,
+					    (tdm_rx_start_slot << TAS2764_TDM_CFG1_51_SHIFT));
 	if (ret < 0)
 		return ret;
 
sound/soc/codecs/tas2764.h +2 -4
index 67d6fd903c42..f015f22a083b 100644
@@ -47,6 +47,7 @@
 #define TAS2764_TDM_CFG0_MASK		GENMASK(3, 1)
 #define TAS2764_TDM_CFG0_44_1_48KHZ	BIT(3)
 #define TAS2764_TDM_CFG0_88_2_96KHZ	(BIT(3) | BIT(1))
+#define TAS2764_TDM_CFG0_FRAME_START	BIT(0)
 
 /* TDM Configuration Reg1 */
 #define TAS2764_TDM_CFG1		TAS2764_REG(0X0, 0x09)
@@ -66,10 +67,7 @@
 #define TAS2764_TDM_CFG2_RXS_16BITS	0x0
 #define TAS2764_TDM_CFG2_RXS_24BITS	BIT(0)
 #define TAS2764_TDM_CFG2_RXS_32BITS	BIT(1)
-#define TAS2764_TDM_CFG2_SCFG_MASK	GENMASK(5, 4)
-#define TAS2764_TDM_CFG2_SCFG_I2S	0x0
-#define TAS2764_TDM_CFG2_SCFG_LEFT_J	BIT(4)
-#define TAS2764_TDM_CFG2_SCFG_RIGHT_J	BIT(5)
+#define TAS2764_TDM_CFG2_SCFG_SHIFT	4
 
 /* TDM Configuration Reg3 */
 #define TAS2764_TDM_CFG3		TAS2764_REG(0X0, 0x0c)
Signature · 1 line
2.35.1
author maintainer
#37 lore raw

PATCH 37/112 ASoC: tas2764: Correct playback volume range

In reply to Greg Kroah-Hartman

From: Hector Martin <[email protected]>

[ Upstream commit 3e99e5697e1f7120b5abc755e8a560b22612d6ed ]

DVC value 0xc8 is -100dB and 0xc9 is mute; this needs to map to -100.5dB as far as the dB scale is concerned. Fix that and enable the mute flag, so alsamixer correctly shows the control as <0 dB .. -100 dB, mute>.

Fixes 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
---
 sound/soc/codecs/tas2764.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/tas2764.c +1 -1
index b93e593788f2..33d7ce78aced 100644
@@ -536,7 +536,7 @@ static int tas2764_codec_probe(struct snd_soc_component *component)
 }
 
 static DECLARE_TLV_DB_SCALE(tas2764_digital_tlv, 1100, 50, 0);
-static DECLARE_TLV_DB_SCALE(tas2764_playback_volume, -10000, 50, 0);
+static DECLARE_TLV_DB_SCALE(tas2764_playback_volume, -10050, 50, 1);
 
 static const struct snd_kcontrol_new tas2764_snd_controls[] = {
 	SOC_SINGLE_TLV("Speaker Volume", TAS2764_DVC, 0,
Signature · 1 line
2.35.1
author maintainer
#38 lore raw

PATCH 38/112 ASoC: tas2764: Fix amp gain register offset & default

In reply to Greg Kroah-Hartman

From: Hector Martin <[email protected]>

[ Upstream commit 1c4f29ec878bbf1cc0a1eb54ae7da5ff98e19641 ]

The register default is 0x28 per the datasheet, and the amp gain field is supposed to be shifted left by one. With the wrong default, the ALSA controls lie about the power-up state. With the wrong shift, we get only half the gain we expect.

Fixes 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
---
 sound/soc/codecs/tas2764.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/codecs/tas2764.c +2 -2
index 33d7ce78aced..37588804a6b5 100644
@@ -541,7 +541,7 @@ static DECLARE_TLV_DB_SCALE(tas2764_playback_volume, -10050, 50, 1);
 static const struct snd_kcontrol_new tas2764_snd_controls[] = {
 	SOC_SINGLE_TLV("Speaker Volume", TAS2764_DVC, 0,
 		       TAS2764_DVC_MAX, 1, tas2764_playback_volume),
-	SOC_SINGLE_TLV("Amp Gain Volume", TAS2764_CHNL_0, 0, 0x14, 0,
+	SOC_SINGLE_TLV("Amp Gain Volume", TAS2764_CHNL_0, 1, 0x14, 0,
 		       tas2764_digital_tlv),
 };
 
@@ -566,7 +566,7 @@ static const struct reg_default tas2764_reg_defaults[] = {
 	{ TAS2764_SW_RST, 0x00 },
 	{ TAS2764_PWR_CTRL, 0x1a },
 	{ TAS2764_DVC, 0x00 },
-	{ TAS2764_CHNL_0, 0x00 },
+	{ TAS2764_CHNL_0, 0x28 },
 	{ TAS2764_TDM_CFG0, 0x09 },
 	{ TAS2764_TDM_CFG1, 0x02 },
 	{ TAS2764_TDM_CFG2, 0x0a },
Signature · 1 line
2.35.1
author maintainer
#39 lore raw

PATCH 39/112 ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks()

In reply to Greg Kroah-Hartman

From: Peter Ujfalusi <[email protected]>

[ Upstream commit 219af251bd1694bce1f627d238347d2eaf13de61 ]

The present flag is only set once when one rate has been found to be saved. This will effectively going to ignore any rate discovered at later time and based on the code, this is not the intention.

Fixes bc2bd45b1f7f3 ("ASoC: Intel: Skylake: Parse nhlt and register clock device")
---
 sound/soc/intel/skylake/skl-nhlt.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
sound/soc/intel/skylake/skl-nhlt.c +2 -1
index 87c891c46291..c668e10baade 100644
@@ -201,7 +201,6 @@ static void skl_get_ssp_clks(struct skl_dev *skl, struct skl_ssp_clk *ssp_clks,
 	struct nhlt_fmt_cfg *fmt_cfg;
 	struct wav_fmt_ext *wav_fmt;
 	unsigned long rate;
-	bool present = false;
 	int rate_index = 0;
 	u16 channels, bps;
 	u8 clk_src;
@@ -215,6 +214,8 @@ static void skl_get_ssp_clks(struct skl_dev *skl, struct skl_ssp_clk *ssp_clks,
 		return;
 
 	for (i = 0; i < fmt->fmt_count; i++) {
+		bool present = false;
+
 		fmt_cfg = &fmt->fmt_config[i];
 		wav_fmt = &fmt_cfg->fmt_ext;
 
Signature · 1 line
2.35.1
author maintainer
#40 lore raw

PATCH 40/112 ASoC: Intel: Skylake: Correct the handling of fmt_config flexible array

In reply to Greg Kroah-Hartman

From: Peter Ujfalusi <[email protected]>

[ Upstream commit fc976f5629afb4160ee77798b14a693eac903ffd ]

The struct nhlt_format's fmt_config is a flexible array, it must not be used as normal array.
When moving to the next nhlt_fmt_cfg we need to take into account the data behind the ->config.caps (indicated by ->config.size).

The logic of the code also changed: it is no longer saves the _last_ fmt_cfg for all found rates.

Fixes bc2bd45b1f7f3 ("ASoC: Intel: Skylake: Parse nhlt and register clock device")
---
 sound/soc/intel/skylake/skl-nhlt.c | 37 ++++++++++++++++++++----------
 1 file changed, 25 insertions(+), 12 deletions(-)
sound/soc/intel/skylake/skl-nhlt.c +25 -12
index c668e10baade..3b3868df9f67 100644
@@ -213,11 +213,12 @@ static void skl_get_ssp_clks(struct skl_dev *skl, struct skl_ssp_clk *ssp_clks,
 	if (fmt->fmt_count == 0)
 		return;
 
+	fmt_cfg = (struct nhlt_fmt_cfg *)fmt->fmt_config;
 	for (i = 0; i < fmt->fmt_count; i++) {
+		struct nhlt_fmt_cfg *saved_fmt_cfg = fmt_cfg;
 		bool present = false;
 
-		fmt_cfg = &fmt->fmt_config[i];
-		wav_fmt = &fmt_cfg->fmt_ext;
+		wav_fmt = &saved_fmt_cfg->fmt_ext;
 
 		channels = wav_fmt->fmt.channels;
 		bps = wav_fmt->fmt.bits_per_sample;
@@ -235,12 +236,18 @@ static void skl_get_ssp_clks(struct skl_dev *skl, struct skl_ssp_clk *ssp_clks,
 		 * derive the rate.
 		 */
 		for (j = i; j < fmt->fmt_count; j++) {
-			fmt_cfg = &fmt->fmt_config[j];
-			wav_fmt = &fmt_cfg->fmt_ext;
+			struct nhlt_fmt_cfg *tmp_fmt_cfg = fmt_cfg;
+
+			wav_fmt = &tmp_fmt_cfg->fmt_ext;
 			if ((fs == wav_fmt->fmt.samples_per_sec) &&
-			   (bps == wav_fmt->fmt.bits_per_sample))
+			   (bps == wav_fmt->fmt.bits_per_sample)) {
 				channels = max_t(u16, channels,
 						wav_fmt->fmt.channels);
+				saved_fmt_cfg = tmp_fmt_cfg;
+			}
+			/* Move to the next nhlt_fmt_cfg */
+			tmp_fmt_cfg = (struct nhlt_fmt_cfg *)(tmp_fmt_cfg->config.caps +
+							      tmp_fmt_cfg->config.size);
 		}
 
 		rate = channels * bps * fs;
@@ -256,8 +263,11 @@ static void skl_get_ssp_clks(struct skl_dev *skl, struct skl_ssp_clk *ssp_clks,
 
 		/* Fill rate and parent for sclk/sclkfs */
 		if (!present) {
+			struct nhlt_fmt_cfg *first_fmt_cfg;
+
+			first_fmt_cfg = (struct nhlt_fmt_cfg *)fmt->fmt_config;
 			i2s_config_ext = (struct skl_i2s_config_blob_ext *)
-						fmt->fmt_config[0].config.caps;
+						first_fmt_cfg->config.caps;
 
 			/* MCLK Divider Source Select */
 			if (is_legacy_blob(i2s_config_ext->hdr.sig)) {
@@ -271,6 +281,9 @@ static void skl_get_ssp_clks(struct skl_dev *skl, struct skl_ssp_clk *ssp_clks,
 
 			parent = skl_get_parent_clk(clk_src);
 
+			/* Move to the next nhlt_fmt_cfg */
+			fmt_cfg = (struct nhlt_fmt_cfg *)(fmt_cfg->config.caps +
+							  fmt_cfg->config.size);
 			/*
 			 * Do not copy the config data if there is no parent
 			 * clock available for this clock source select
@@ -279,9 +292,9 @@ static void skl_get_ssp_clks(struct skl_dev *skl, struct skl_ssp_clk *ssp_clks,
 				continue;
 
 			sclk[id].rate_cfg[rate_index].rate = rate;
-			sclk[id].rate_cfg[rate_index].config = fmt_cfg;
+			sclk[id].rate_cfg[rate_index].config = saved_fmt_cfg;
 			sclkfs[id].rate_cfg[rate_index].rate = rate;
-			sclkfs[id].rate_cfg[rate_index].config = fmt_cfg;
+			sclkfs[id].rate_cfg[rate_index].config = saved_fmt_cfg;
 			sclk[id].parent_name = parent->name;
 			sclkfs[id].parent_name = parent->name;
 
@@ -295,13 +308,13 @@ static void skl_get_mclk(struct skl_dev *skl, struct skl_ssp_clk *mclk,
 {
 	struct skl_i2s_config_blob_ext *i2s_config_ext;
 	struct skl_i2s_config_blob_legacy *i2s_config;
-	struct nhlt_specific_cfg *fmt_cfg;
+	struct nhlt_fmt_cfg *fmt_cfg;
 	struct skl_clk_parent_src *parent;
 	u32 clkdiv, div_ratio;
 	u8 clk_src;
 
-	fmt_cfg = &fmt->fmt_config[0].config;
-	i2s_config_ext = (struct skl_i2s_config_blob_ext *)fmt_cfg->caps;
+	fmt_cfg = (struct nhlt_fmt_cfg *)fmt->fmt_config;
+	i2s_config_ext = (struct skl_i2s_config_blob_ext *)fmt_cfg->config.caps;
 
 	/* MCLK Divider Source Select and divider */
 	if (is_legacy_blob(i2s_config_ext->hdr.sig)) {
@@ -330,7 +343,7 @@ static void skl_get_mclk(struct skl_dev *skl, struct skl_ssp_clk *mclk,
 		return;
 
 	mclk[id].rate_cfg[0].rate = parent->rate/div_ratio;
-	mclk[id].rate_cfg[0].config = &fmt->fmt_config[0];
+	mclk[id].rate_cfg[0].config = fmt_cfg;
 	mclk[id].parent_name = parent->name;
 }
 
Signature · 1 line
2.35.1
author maintainer
#41 lore raw

PATCH 41/112 net: stmmac: dwc-qos: Disable split header for Tegra194

In reply to Greg Kroah-Hartman

From: Jon Hunter <[email protected]>

[ Upstream commit 029c1c2059e9c4b38f97a06204cdecd10cfbeb8a ]

There is a long-standing issue with the Synopsys DWC Ethernet driver for Tegra194 where random system crashes have been observed [0]. The problem occurs when the split header feature is enabled in the stmmac driver. In the bad case, a larger than expected buffer length is received and causes the calculation of the total buffer length to overflow. This results in a very large buffer length that causes the kernel to crash. Why this larger buffer length is received is not clear, however, the feedback from the NVIDIA design team is that the split header feature is not supported for Tegra194. Therefore, disable split header support for Tegra194 to prevent these random crashes from occurring.

[0] https://lore.kernel.org/linux-tegra/[email protected]/

Fixes 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores")
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c +1 -0
index 2342d497348e..fd1b0cc6b5fa 100644
@@ -363,6 +363,7 @@ static void *tegra_eqos_probe(struct platform_device *pdev,
 	data->fix_mac_speed = tegra_eqos_fix_speed;
 	data->init = tegra_eqos_init;
 	data->bsp_priv = eqos;
+	data->sph_disable = 1;
 
 	err = tegra_eqos_init(pdev, eqos);
 	if (err < 0)
Signature · 1 line
2.35.1
author maintainer
#42 lore raw

PATCH 42/112 sysctl: Fix data races in proc_dointvec().

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 1f1be04b4d48a2475ea1aab46a99221bfc5c0968 ]

A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing.

This patch changes proc_dointvec() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_dointvec() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 kernel/sysctl.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
kernel/sysctl.c +3 -3
index 8832440a4938..81657b13bd53 100644
@@ -557,14 +557,14 @@ static int do_proc_dointvec_conv(bool *negp, unsigned long *lvalp,
 		if (*negp) {
 			if (*lvalp > (unsigned long) INT_MAX + 1)
 				return -EINVAL;
-			*valp = -*lvalp;
+			WRITE_ONCE(*valp, -*lvalp);
 		} else {
 			if (*lvalp > (unsigned long) INT_MAX)
 				return -EINVAL;
-			*valp = *lvalp;
+			WRITE_ONCE(*valp, *lvalp);
 		}
 	} else {
-		int val = *valp;
+		int val = READ_ONCE(*valp);
 		if (val < 0) {
 			*negp = true;
 			*lvalp = -(unsigned long)val;
Signature · 1 line
2.35.1
author maintainer
#43 lore raw

PATCH 43/112 sysctl: Fix data races in proc_douintvec().

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 4762b532ec9539755aab61445d5da6e1926ccb99 ]

A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing.

This patch changes proc_douintvec() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_douintvec() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side.

Fixes e7d316a02f68 ("sysctl: handle error writing UINT_MAX to u32 fields")
---
 kernel/sysctl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/sysctl.c +2 -2
index 81657b13bd53..30681afbdb70 100644
@@ -583,9 +583,9 @@ static int do_proc_douintvec_conv(unsigned long *lvalp,
 	if (write) {
 		if (*lvalp > UINT_MAX)
 			return -EINVAL;
-		*valp = *lvalp;
+		WRITE_ONCE(*valp, *lvalp);
 	} else {
-		unsigned int val = *valp;
+		unsigned int val = READ_ONCE(*valp);
 		*lvalp = (unsigned long)val;
 	}
 	return 0;
Signature · 1 line
2.35.1
author maintainer
#44 lore raw

PATCH 44/112 sysctl: Fix data races in proc_dointvec_minmax().

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit f613d86d014b6375a4085901de39406598121e35 ]

A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing.

This patch changes proc_dointvec_minmax() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_dointvec_minmax() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 kernel/sysctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/sysctl.c +1 -1
index 30681afbdb70..1800907da60c 100644
@@ -959,7 +959,7 @@ static int do_proc_dointvec_minmax_conv(bool *negp, unsigned long *lvalp,
 		if ((param->min && *param->min > tmp) ||
 		    (param->max && *param->max < tmp))
 			return -EINVAL;
-		*valp = tmp;
+		WRITE_ONCE(*valp, tmp);
 	}
 
 	return 0;
Signature · 1 line
2.35.1
author maintainer
#45 lore raw

PATCH 45/112 sysctl: Fix data races in proc_douintvec_minmax().

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 2d3b559df3ed39258737789aae2ae7973d205bc1 ]

A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing.

This patch changes proc_douintvec_minmax() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_douintvec_minmax() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side.

Fixes 61d9b56a8920 ("sysctl: add unsigned int range support")
---
 kernel/sysctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/sysctl.c +1 -1
index 1800907da60c..df6090ba1d0b 100644
@@ -1025,7 +1025,7 @@ static int do_proc_douintvec_minmax_conv(unsigned long *lvalp,
 		    (param->max && *param->max < tmp))
 			return -ERANGE;
 
-		*valp = tmp;
+		WRITE_ONCE(*valp, tmp);
 	}
 
 	return 0;
Signature · 1 line
2.35.1
author maintainer
#46 lore raw

PATCH 46/112 sysctl: Fix data races in proc_doulongvec_minmax().

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit c31bcc8fb89fc2812663900589c6325ba35d9a65 ]

A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing.

This patch changes proc_doulongvec_minmax() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_doulongvec_minmax() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 kernel/sysctl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/sysctl.c +2 -2
index df6090ba1d0b..e7409788db64 100644
@@ -1193,9 +1193,9 @@ static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table,
 				err = -EINVAL;
 				break;
 			}
-			*i = val;
+			WRITE_ONCE(*i, val);
 		} else {
-			val = convdiv * (*i) / convmul;
+			val = convdiv * READ_ONCE(*i) / convmul;
 			if (!first)
 				proc_put_char(&buffer, &left, '\t');
 			proc_put_long(&buffer, &left, val, false);
Signature · 1 line
2.35.1
author maintainer
#47 lore raw

PATCH 47/112 sysctl: Fix data races in proc_dointvec_jiffies().

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit e877820877663fbae8cb9582ea597a7230b94df3 ]

A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing.

This patch changes proc_dointvec_jiffies() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_dointvec_jiffies() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 kernel/sysctl.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
kernel/sysctl.c +5 -2
index e7409788db64..83241a56539b 100644
@@ -1276,9 +1276,12 @@ static int do_proc_dointvec_jiffies_conv(bool *negp, unsigned long *lvalp,
 	if (write) {
 		if (*lvalp > INT_MAX / HZ)
 			return 1;
-		*valp = *negp ? -(*lvalp*HZ) : (*lvalp*HZ);
+		if (*negp)
+			WRITE_ONCE(*valp, -*lvalp * HZ);
+		else
+			WRITE_ONCE(*valp, *lvalp * HZ);
 	} else {
-		int val = *valp;
+		int val = READ_ONCE(*valp);
 		unsigned long lval;
 		if (val < 0) {
 			*negp = true;
Signature · 1 line
2.35.1
author maintainer
#48 lore raw

PATCH 48/112 tcp: Fix a data-race around sysctl_tcp_max_orphans.

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 47e6ab24e8c6e3ca10ceb5835413f401f90de4bf ]

While reading sysctl_tcp_max_orphans, it can be changed concurrently. So, we need to add READ_ONCE() to avoid a data-race.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/ipv4/tcp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/ipv4/tcp.c +2 -1
index a3ec2a08027b..19c13ad5c121 100644
@@ -2490,7 +2490,8 @@ static void tcp_orphan_update(struct timer_list *unused)
 
 static bool tcp_too_many_orphans(int shift)
 {
-	return READ_ONCE(tcp_orphan_cache) << shift > sysctl_tcp_max_orphans;
+	return READ_ONCE(tcp_orphan_cache) << shift >
+		READ_ONCE(sysctl_tcp_max_orphans);
 }
 
 bool tcp_check_oom(struct sock *sk, int shift)
Signature · 1 line
2.35.1
author maintainer
#49 lore raw

PATCH 49/112 inetpeer: Fix data-races around sysctl.

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 3d32edf1f3c38d3301f6434e56316f293466d7fb ]

While reading inetpeer sysctl variables, they can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/ipv4/inetpeer.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
net/ipv4/inetpeer.c +8 -4
index ff327a62c9ce..a18668552d33 100644
@@ -148,16 +148,20 @@ static void inet_peer_gc(struct inet_peer_base *base,
 			 struct inet_peer *gc_stack[],
 			 unsigned int gc_cnt)
 {
+	int peer_threshold, peer_maxttl, peer_minttl;
 	struct inet_peer *p;
 	__u32 delta, ttl;
 	int i;
 
-	if (base->total >= inet_peer_threshold)
+	peer_threshold = READ_ONCE(inet_peer_threshold);
+	peer_maxttl = READ_ONCE(inet_peer_maxttl);
+	peer_minttl = READ_ONCE(inet_peer_minttl);
+
+	if (base->total >= peer_threshold)
 		ttl = 0; /* be aggressive */
 	else
-		ttl = inet_peer_maxttl
-				- (inet_peer_maxttl - inet_peer_minttl) / HZ *
-					base->total / inet_peer_threshold * HZ;
+		ttl = peer_maxttl - (peer_maxttl - peer_minttl) / HZ *
+			base->total / peer_threshold * HZ;
 	for (i = 0; i < gc_cnt; i++) {
 		p = gc_stack[i];
 
Signature · 1 line
2.35.1
author maintainer
#50 lore raw

PATCH 50/112 net: Fix data-races around sysctl_mem.

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 310731e2f1611d1d13aae237abcf8e66d33345d5 ]

While reading .sysctl_mem, it can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 include/net/sock.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/net/sock.h +1 -1
index 2c11eb4abdd2..83854cec4a47 100644
@@ -1445,7 +1445,7 @@ void __sk_mem_reclaim(struct sock *sk, int amount);
 /* sysctl_mem values are in pages, we convert them in SK_MEM_QUANTUM units */
 static inline long sk_prot_mem_limits(const struct sock *sk, int index)
 {
-	long val = sk->sk_prot->sysctl_mem[index];
+	long val = READ_ONCE(sk->sk_prot->sysctl_mem[index]);
 
 #if PAGE_SIZE > SK_MEM_QUANTUM
 	val <<= PAGE_SHIFT - SK_MEM_QUANTUM_SHIFT;
Signature · 1 line
2.35.1
author maintainer
#51 lore raw

PATCH 51/112 cipso: Fix data-races around sysctl.

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit dd44f04b9214adb68ef5684ae87a81ba03632250 ]

While reading cipso sysctl variables, they can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races.

Fixes 446fda4f2682 ("[NetLabel]: CIPSOv4 engine")
---
 Documentation/networking/ip-sysctl.rst |  2 +-
 net/ipv4/cipso_ipv4.c                  | 12 +++++++-----
 2 files changed, 8 insertions(+), 6 deletions(-)
Documentation/networking/ip-sysctl.rst +1 -1
index 4822a058a81d..73de75906b24 100644
@@ -988,7 +988,7 @@ cipso_cache_enable - BOOLEAN
 cipso_cache_bucket_size - INTEGER
 	The CIPSO label cache consists of a fixed size hash table with each
 	hash bucket containing a number of cache entries.  This variable limits
-	the number of entries in each hash bucket; the larger the value the
+	the number of entries in each hash bucket; the larger the value is, the
 	more CIPSO label mappings that can be cached.  When the number of
 	entries in a given hash bucket reaches this limit adding new entries
 	causes the oldest entry in the bucket to be removed to make room.
net/ipv4/cipso_ipv4.c +7 -5
index ca217a6f488f..d4a4160159a9 100644
@@ -240,7 +240,7 @@ static int cipso_v4_cache_check(const unsigned char *key,
 	struct cipso_v4_map_cache_entry *prev_entry = NULL;
 	u32 hash;
 
-	if (!cipso_v4_cache_enabled)
+	if (!READ_ONCE(cipso_v4_cache_enabled))
 		return -ENOENT;
 
 	hash = cipso_v4_map_cache_hash(key, key_len);
@@ -297,13 +297,14 @@ static int cipso_v4_cache_check(const unsigned char *key,
 int cipso_v4_cache_add(const unsigned char *cipso_ptr,
 		       const struct netlbl_lsm_secattr *secattr)
 {
+	int bkt_size = READ_ONCE(cipso_v4_cache_bucketsize);
 	int ret_val = -EPERM;
 	u32 bkt;
 	struct cipso_v4_map_cache_entry *entry = NULL;
 	struct cipso_v4_map_cache_entry *old_entry = NULL;
 	u32 cipso_ptr_len;
 
-	if (!cipso_v4_cache_enabled || cipso_v4_cache_bucketsize <= 0)
+	if (!READ_ONCE(cipso_v4_cache_enabled) || bkt_size <= 0)
 		return 0;
 
 	cipso_ptr_len = cipso_ptr[1];
@@ -323,7 +324,7 @@ int cipso_v4_cache_add(const unsigned char *cipso_ptr,
 
 	bkt = entry->hash & (CIPSO_V4_CACHE_BUCKETS - 1);
 	spin_lock_bh(&cipso_v4_cache[bkt].lock);
-	if (cipso_v4_cache[bkt].size < cipso_v4_cache_bucketsize) {
+	if (cipso_v4_cache[bkt].size < bkt_size) {
 		list_add(&entry->list, &cipso_v4_cache[bkt].list);
 		cipso_v4_cache[bkt].size += 1;
 	} else {
@@ -1200,7 +1201,8 @@ static int cipso_v4_gentag_rbm(const struct cipso_v4_doi *doi_def,
 		/* This will send packets using the "optimized" format when
 		 * possible as specified in  section 3.4.2.6 of the
 		 * CIPSO draft. */
-		if (cipso_v4_rbm_optfmt && ret_val > 0 && ret_val <= 10)
+		if (READ_ONCE(cipso_v4_rbm_optfmt) && ret_val > 0 &&
+		    ret_val <= 10)
 			tag_len = 14;
 		else
 			tag_len = 4 + ret_val;
@@ -1604,7 +1606,7 @@ int cipso_v4_validate(const struct sk_buff *skb, unsigned char **option)
 			 * all the CIPSO validations here but it doesn't
 			 * really specify _exactly_ what we need to validate
 			 * ... so, just make it a sysctl tunable. */
-			if (cipso_v4_rbm_strictvalid) {
+			if (READ_ONCE(cipso_v4_rbm_strictvalid)) {
 				if (cipso_v4_map_lvl_valid(doi_def,
 							   tag[3]) < 0) {
 					err_offset = opt_iter + 3;
Signature · 1 line
2.35.1
author maintainer
#52 lore raw

PATCH 52/112 icmp: Fix data-races around sysctl.

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 48d7ee321ea5182c6a70782aa186422a70e67e22 ]

While reading icmp sysctl variables, they can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races.

Fixes 4cdf507d5452 ("icmp: add a global rate limitation")
---
 net/ipv4/icmp.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
net/ipv4/icmp.c +3 -2
index cd65d3146c30..f22c0d55f479 100644
@@ -261,11 +261,12 @@ bool icmp_global_allow(void)
 	spin_lock(&icmp_global.lock);
 	delta = min_t(u32, now - icmp_global.stamp, HZ);
 	if (delta >= HZ / 50) {
-		incr = sysctl_icmp_msgs_per_sec * delta / HZ ;
+		incr = READ_ONCE(sysctl_icmp_msgs_per_sec) * delta / HZ;
 		if (incr)
 			WRITE_ONCE(icmp_global.stamp, now);
 	}
-	credit = min_t(u32, icmp_global.credit + incr, sysctl_icmp_msgs_burst);
+	credit = min_t(u32, icmp_global.credit + incr,
+		       READ_ONCE(sysctl_icmp_msgs_burst));
 	if (credit) {
 		/* We want to use a credit of one in average, but need to randomize
 		 * it for security reasons.
Signature · 1 line
2.35.1
author maintainer
#53 lore raw

PATCH 53/112 ipv4: Fix a data-race around sysctl_fib_sync_mem.

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 73318c4b7dbd0e781aaababff17376b2894745c0 ]

While reading sysctl_fib_sync_mem, it can be changed concurrently. So, we need to add READ_ONCE() to avoid a data-race.

Fixes 9ab948a91b2c ("ipv4: Allow amount of dirty memory from fib resizing to be controllable")
---
 net/ipv4/fib_trie.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv4/fib_trie.c +1 -1
index ffc5332f1390..a28f525e2c47 100644
@@ -497,7 +497,7 @@ static void tnode_free(struct key_vector *tn)
 		tn = container_of(head, struct tnode, rcu)->kv;
 	}
 
-	if (tnode_free_size >= sysctl_fib_sync_mem) {
+	if (tnode_free_size >= READ_ONCE(sysctl_fib_sync_mem)) {
 		tnode_free_size = 0;
 		synchronize_rcu();
 	}
Signature · 1 line
2.35.1
author maintainer
#54 lore raw

PATCH 54/112 ARM: dts: at91: sama5d2: Fix typo in i2s1 node

In reply to Greg Kroah-Hartman

From: Ryan Wanner <[email protected]>

[ Upstream commit 2fdf15b50a46e366740df4cccbe2343269b4ff55 ]

Fix typo in i2s1 causing errors in dt binding validation. Change assigned-parrents to assigned-clock-parents to match i2s0 node formatting.

Fixes 1ca81883c557 ("ARM: dts: at91: sama5d2: add nodes for I2S controllers")

[claudiu.beznea: use imperative addressing in commit description, remove
blank line after fixes tag, fix typo in commit message]

---
 arch/arm/boot/dts/sama5d2.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/sama5d2.dtsi +1 -1
index 12f57278ba4a..33f76d14341e 100644
@@ -1125,7 +1125,7 @@ AT91_XDMAC_DT_PERID(33))>,
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
 				clock-names = "pclk", "gclk";
 				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
-				assigned-parrents = <&pmc PMC_TYPE_GCK 55>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
 				status = "disabled";
 			};
 
Signature · 1 line
2.35.1
author maintainer
#55 lore raw

PATCH 55/112 ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero

In reply to Greg Kroah-Hartman

From: Michal Suchanek <[email protected]>

[ Upstream commit 884b66976a7279ee889ba885fe364244d50b79e7 ]

The device tree should include generic "jedec,spi-nor" compatible, and a manufacturer-specific one.
The macronix part is what is shipped on the boards that come with a flash chip.

---
 arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +1 -1
index f19ed981da9d..3706216ffb40 100644
@@ -169,7 +169,7 @@ &spi0 {
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 	};
Signature · 1 line
2.35.1
author maintainer
#56 lore raw

PATCH 56/112 drm/i915/selftests: fix a couple IS_ERR() vs NULL tests

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 896dcabd1f8f613c533d948df17408c41f8929f5 ]

The shmem_pin_map() function doesn't return error pointers, it returns NULL.

Fixes be1cb55a07bf ("drm/i915/gt: Keep a no-frills swappable copy of the default context state")
(cherry picked from commit d50f5a109cf4ed50c5b575c1bb5fc3bd17b23308)
---
 drivers/gpu/drm/i915/gt/selftest_lrc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/gt/selftest_lrc.c +4 -4
index 95d41c01d0e0..35d55f98a06f 100644
@@ -4788,8 +4788,8 @@ static int live_lrc_layout(void *arg)
 			continue;
 
 		hw = shmem_pin_map(engine->default_state);
-		if (IS_ERR(hw)) {
-			err = PTR_ERR(hw);
+		if (!hw) {
+			err = -ENOMEM;
 			break;
 		}
 		hw += LRC_STATE_OFFSET / sizeof(*hw);
@@ -4965,8 +4965,8 @@ static int live_lrc_fixed(void *arg)
 			continue;
 
 		hw = shmem_pin_map(engine->default_state);
-		if (IS_ERR(hw)) {
-			err = PTR_ERR(hw);
+		if (!hw) {
+			err = -ENOMEM;
 			break;
 		}
 		hw += LRC_STATE_OFFSET / sizeof(*hw);
Signature · 1 line
2.35.1
author maintainer
#57 lore raw

PATCH 57/112 drm/i915/gt: Serialize TLB invalidates with GT resets

In reply to Greg Kroah-Hartman

From: Chris Wilson <[email protected]>

[ Upstream commit a1c5a7bf79c1faa5633b918b5c0666545e84c4d1 ]

Avoid trying to invalidate the TLB in the middle of performing an engine reset, as this may result in the reset timing out. Currently, the TLB invalidate is only serialised by its own mutex, forgoing the uncore lock, but we can take the uncore->lock as well to serialise the mmio access, thereby serialising with the GDRST.

Tested on a NUC5i7RYB, BIOS RYBDWi35.86A.0380.2019.0517.1530 with i915 selftest/hangcheck.

---
 drivers/gpu/drm/i915/gt/intel_gt.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_gt.c +14 -1
index 6615eb5147e2..a33887f2464f 100644
@@ -736,6 +736,20 @@ void intel_gt_invalidate_tlbs(struct intel_gt *gt)
 	mutex_lock(&gt->tlb_invalidate_lock);
 	intel_uncore_forcewake_get(uncore, FORCEWAKE_ALL);
 
+	spin_lock_irq(&uncore->lock); /* serialise invalidate with GT reset */
+
+	for_each_engine(engine, gt, id) {
+		struct reg_and_bit rb;
+
+		rb = get_reg_and_bit(engine, regs == gen8_regs, regs, num);
+		if (!i915_mmio_reg_offset(rb.reg))
+			continue;
+
+		intel_uncore_write_fw(uncore, rb.reg, rb.bit);
+	}
+
+	spin_unlock_irq(&uncore->lock);
+
 	for_each_engine(engine, gt, id) {
 		/*
 		 * HW architecture suggest typical invalidation time at 40us,
@@ -750,7 +764,6 @@ void intel_gt_invalidate_tlbs(struct intel_gt *gt)
 		if (!i915_mmio_reg_offset(rb.reg))
 			continue;
 
-		intel_uncore_write_fw(uncore, rb.reg, rb.bit);
 		if (__intel_wait_for_register_fw(uncore,
 						 rb.reg, rb.bit, 0,
 						 timeout_us, timeout_ms,
Signature · 1 line
2.35.1
author maintainer
#58 lore raw

PATCH 58/112 sysctl: Fix data-races in proc_dointvec_ms_jiffies().

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 7d1025e559782b58824b36cb8ad547a69f2e4b31 ]

A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing.

This patch changes proc_dointvec_ms_jiffies() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_dointvec_ms_jiffies() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 kernel/sysctl.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
kernel/sysctl.c +4 -4
index 83241a56539b..642dc51b6503 100644
@@ -1327,9 +1327,9 @@ static int do_proc_dointvec_ms_jiffies_conv(bool *negp, unsigned long *lvalp,
 
 		if (jif > INT_MAX)
 			return 1;
-		*valp = (int)jif;
+		WRITE_ONCE(*valp, (int)jif);
 	} else {
-		int val = *valp;
+		int val = READ_ONCE(*valp);
 		unsigned long lval;
 		if (val < 0) {
 			*negp = true;
@@ -1397,8 +1397,8 @@ int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write,
  * @ppos: the current position in the file
  *
  * Reads/writes up to table->maxlen/sizeof(unsigned int) integer
- * values from/to the user buffer, treated as an ASCII string. 
- * The values read are assumed to be in 1/1000 seconds, and 
+ * values from/to the user buffer, treated as an ASCII string.
+ * The values read are assumed to be in 1/1000 seconds, and
  * are converted into jiffies.
  *
  * Returns 0 on success.
Signature · 1 line
2.35.1
author maintainer
#59 lore raw

PATCH 59/112 icmp: Fix a data-race around sysctl_icmp_ratelimit.

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 2a4eb714841f288cf51c7d942d98af6a8c6e4b01 ]

While reading sysctl_icmp_ratelimit, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/ipv4/icmp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/ipv4/icmp.c +2 -1
index f22c0d55f479..9483c2a16b78 100644
@@ -328,7 +328,8 @@ static bool icmpv4_xrlim_allow(struct net *net, struct rtable *rt,
 
 	vif = l3mdev_master_ifindex(dst->dev);
 	peer = inet_getpeer_v4(net->ipv4.peers, fl4->daddr, vif, 1);
-	rc = inet_peer_xrlim_allow(peer, net->ipv4.sysctl_icmp_ratelimit);
+	rc = inet_peer_xrlim_allow(peer,
+				   READ_ONCE(net->ipv4.sysctl_icmp_ratelimit));
 	if (peer)
 		inet_putpeer(peer);
 out:
Signature · 1 line
2.35.1
author maintainer
#60 lore raw

PATCH 60/112 icmp: Fix a data-race around sysctl_icmp_ratemask.

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 1ebcb25ad6fc3d50fca87350acf451b9a66dd31e ]

While reading sysctl_icmp_ratemask, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/ipv4/icmp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv4/icmp.c +1 -1
index 9483c2a16b78..0fa0da1d71f5 100644
@@ -290,7 +290,7 @@ static bool icmpv4_mask_allow(struct net *net, int type, int code)
 		return true;
 
 	/* Limit if icmp type is enabled in ratemask. */
-	if (!((1 << type) & net->ipv4.sysctl_icmp_ratemask))
+	if (!((1 << type) & READ_ONCE(net->ipv4.sysctl_icmp_ratemask)))
 		return true;
 
 	return false;
Signature · 1 line
2.35.1
author maintainer
#61 lore raw

PATCH 61/112 raw: Fix a data-race around sysctl_raw_l3mdev_accept.

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 1dace014928e6e385363032d359a04dee9158af0 ]

While reading sysctl_raw_l3mdev_accept, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

Fixes 6897445fb194 ("net: provide a sysctl raw_l3mdev_accept for raw socket lookup with VRFs")
---
 include/net/raw.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/net/raw.h +1 -1
index 8ad8df594853..c51a635671a7 100644
@@ -75,7 +75,7 @@ static inline bool raw_sk_bound_dev_eq(struct net *net, int bound_dev_if,
 				       int dif, int sdif)
 {
 #if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV)
-	return inet_bound_dev_eq(!!net->ipv4.sysctl_raw_l3mdev_accept,
+	return inet_bound_dev_eq(READ_ONCE(net->ipv4.sysctl_raw_l3mdev_accept),
 				 bound_dev_if, dif, sdif);
 #else
 	return inet_bound_dev_eq(true, bound_dev_if, dif, sdif);
Signature · 1 line
2.35.1
author maintainer
#62 lore raw

PATCH 62/112 ipv4: Fix data-races around sysctl_ip_dynaddr.

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit e49e4aff7ec19b2d0d0957ee30e93dade57dab9e ]

While reading sysctl_ip_dynaddr, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 Documentation/networking/ip-sysctl.rst | 2 +-
 net/ipv4/af_inet.c                     | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
Documentation/networking/ip-sysctl.rst +1 -1
index 73de75906b24..0b1f3235aa77 100644
@@ -1080,7 +1080,7 @@ ip_autobind_reuse - BOOLEAN
 	option should only be set by experts.
 	Default: 0
 
-ip_dynaddr - BOOLEAN
+ip_dynaddr - INTEGER
 	If set non-zero, enables support for dynamic addresses.
 	If set to a non-zero value larger than 1, a kernel log
 	message will be printed when dynamic address rewriting
net/ipv4/af_inet.c +2 -2
index 742218594741..e77283069c7b 100644
@@ -1245,7 +1245,7 @@ static int inet_sk_reselect_saddr(struct sock *sk)
 	if (new_saddr == old_saddr)
 		return 0;
 
-	if (sock_net(sk)->ipv4.sysctl_ip_dynaddr > 1) {
+	if (READ_ONCE(sock_net(sk)->ipv4.sysctl_ip_dynaddr) > 1) {
 		pr_info("%s(): shifting inet->saddr from %pI4 to %pI4\n",
 			__func__, &old_saddr, &new_saddr);
 	}
@@ -1300,7 +1300,7 @@ int inet_sk_rebuild_header(struct sock *sk)
 		 * Other protocols have to map its equivalent state to TCP_SYN_SENT.
 		 * DCCP maps its DCCP_REQUESTING state to TCP_SYN_SENT. -acme
 		 */
-		if (!sock_net(sk)->ipv4.sysctl_ip_dynaddr ||
+		if (!READ_ONCE(sock_net(sk)->ipv4.sysctl_ip_dynaddr) ||
 		    sk->sk_state != TCP_SYN_SENT ||
 		    (sk->sk_userlocks & SOCK_BINDADDR_LOCK) ||
 		    (err = inet_sk_reselect_saddr(sk)) != 0)
Signature · 1 line
2.35.1
author maintainer
#63 lore raw

PATCH 63/112 nexthop: Fix data-races around nexthop_compat_mode.

In reply to Greg Kroah-Hartman

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit bdf00bf24bef9be1ca641a6390fd5487873e0d2e ]

While reading nexthop_compat_mode, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers.

Fixes 4f80116d3df3 ("net: ipv4: add sysctl for nexthop api compatibility mode")
---
 net/ipv4/fib_semantics.c |    2 +-
 net/ipv4/nexthop.c       |    5 +++--
 net/ipv6/route.c         |    2 +-
 3 files changed, 5 insertions(+), 4 deletions(-)
net/ipv4/fib_semantics.c +1 -1
@@ -1831,7 +1831,7 @@ int fib_dump_info(struct sk_buff *skb, u
 			goto nla_put_failure;
 		if (nexthop_is_blackhole(fi->nh))
 			rtm->rtm_type = RTN_BLACKHOLE;
-		if (!fi->fib_net->ipv4.sysctl_nexthop_compat_mode)
+		if (!READ_ONCE(fi->fib_net->ipv4.sysctl_nexthop_compat_mode))
 			goto offload;
 	}
 
net/ipv4/nexthop.c +3 -2
@@ -882,7 +882,7 @@ static void __remove_nexthop_fib(struct
 		/* __ip6_del_rt does a release, so do a hold here */
 		fib6_info_hold(f6i);
 		ipv6_stub->ip6_del_rt(net, f6i,
-				      !net->ipv4.sysctl_nexthop_compat_mode);
+				      !READ_ONCE(net->ipv4.sysctl_nexthop_compat_mode));
 	}
 }
 
@@ -1194,7 +1194,8 @@ out:
 	if (!rc) {
 		nh_base_seq_inc(net);
 		nexthop_notify(RTM_NEWNEXTHOP, new_nh, &cfg->nlinfo);
-		if (replace_notify && net->ipv4.sysctl_nexthop_compat_mode)
+		if (replace_notify &&
+		    READ_ONCE(net->ipv4.sysctl_nexthop_compat_mode))
 			nexthop_replace_notify(net, new_nh, &cfg->nlinfo);
 	}
 
net/ipv6/route.c +1 -1
@@ -5641,7 +5641,7 @@ static int rt6_fill_node(struct net *net
 		if (nexthop_is_blackhole(rt->nh))
 			rtm->rtm_type = RTN_BLACKHOLE;
 
-		if (net->ipv4.sysctl_nexthop_compat_mode &&
+		if (READ_ONCE(net->ipv4.sysctl_nexthop_compat_mode) &&
 		    rt6_fill_node_nexthop(skb, rt->nh, &nh_flags) < 0)
 			goto nla_put_failure;
 
author maintainer
#64 lore raw

PATCH 64/112 net: ftgmac100: Hold reference returned by of_get_child_by_name()

In reply to Greg Kroah-Hartman

From: Liang He <[email protected]>

[ Upstream commit 49b9f431ff0d845a36be0b3ede35ec324f2e5fee ]

In ftgmac100_probe(), we should hold the refernece returned by of_get_child_by_name() and use it to call of_node_put() for reference balance.

Fixes 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property")
---
 drivers/net/ethernet/faraday/ftgmac100.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/net/ethernet/faraday/ftgmac100.c +14 -1
index eea4bd3116e8..969af4dd6405 100644
@@ -1747,6 +1747,19 @@ static int ftgmac100_setup_clk(struct ftgmac100 *priv)
 	return rc;
 }
 
+static bool ftgmac100_has_child_node(struct device_node *np, const char *name)
+{
+	struct device_node *child_np = of_get_child_by_name(np, name);
+	bool ret = false;
+
+	if (child_np) {
+		ret = true;
+		of_node_put(child_np);
+	}
+
+	return ret;
+}
+
 static int ftgmac100_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -1860,7 +1873,7 @@ static int ftgmac100_probe(struct platform_device *pdev)
 
 		/* Display what we found */
 		phy_attached_info(phy);
-	} else if (np && !of_get_child_by_name(np, "mdio")) {
+	} else if (np && !ftgmac100_has_child_node(np, "mdio")) {
 		/* Support legacy ASPEED devicetree descriptions that decribe a
 		 * MAC with an embedded MDIO controller but have no "mdio"
 		 * child node. Automatically scan the MDIO bus for available
Signature · 1 line
2.35.1
author maintainer
#65 lore raw

PATCH 65/112 ima: force signature verification when CONFIG_KEXEC_SIG is configured

In reply to Greg Kroah-Hartman

From: Coiby Xu <[email protected]>

[ Upstream commit af16df54b89dee72df253abc5e7b5e8a6d16c11c ]

Currently, an unsigned kernel could be kexec'ed when IMA arch specific policy is configured unless lockdown is enabled. Enforce kernel signature verification check in the kexec_file_load syscall when IMA arch specific policy is configured.

Fixes 99d5cadfde2b ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE")
Reported-and-suggested-by Mimi Zohar <[email protected]>
---
 arch/x86/kernel/ima_arch.c |  2 ++
 include/linux/kexec.h      |  6 ++++++
 kernel/kexec_file.c        | 11 ++++++++++-
 3 files changed, 18 insertions(+), 1 deletion(-)
arch/x86/kernel/ima_arch.c +2 -0
index 7dfb1e808928..bd218470d145 100644
@@ -88,6 +88,8 @@ const char * const *arch_get_ima_policy(void)
 	if (IS_ENABLED(CONFIG_IMA_ARCH_POLICY) && arch_ima_get_secureboot()) {
 		if (IS_ENABLED(CONFIG_MODULE_SIG))
 			set_module_sig_enforced();
+		if (IS_ENABLED(CONFIG_KEXEC_SIG))
+			set_kexec_sig_enforced();
 		return sb_arch_rules;
 	}
 	return NULL;
include/linux/kexec.h +6 -0
index 037192c3a46f..a1f12e959bba 100644
@@ -442,6 +442,12 @@ static inline int kexec_crash_loaded(void) { return 0; }
 #define kexec_in_progress false
 #endif /* CONFIG_KEXEC_CORE */
 
+#ifdef CONFIG_KEXEC_SIG
+void set_kexec_sig_enforced(void);
+#else
+static inline void set_kexec_sig_enforced(void) {}
+#endif
+
 #endif /* !defined(__ASSEBMLY__) */
 
 #endif /* LINUX_KEXEC_H */
kernel/kexec_file.c +10 -1
index 2e0f0b3fb9ab..fff11916aba3 100644
@@ -29,6 +29,15 @@
 #include <linux/vmalloc.h>
 #include "kexec_internal.h"
 
+#ifdef CONFIG_KEXEC_SIG
+static bool sig_enforce = IS_ENABLED(CONFIG_KEXEC_SIG_FORCE);
+
+void set_kexec_sig_enforced(void)
+{
+	sig_enforce = true;
+}
+#endif
+
 static int kexec_calculate_store_digests(struct kimage *image);
 
 /*
@@ -159,7 +168,7 @@ kimage_validate_signature(struct kimage *image)
 					   image->kernel_buf_len);
 	if (ret) {
 
-		if (IS_ENABLED(CONFIG_KEXEC_SIG_FORCE)) {
+		if (sig_enforce) {
 			pr_notice("Enforced kernel signature verification failed (%d).\n", ret);
 			return ret;
 		}
Signature · 1 line
2.35.1
author maintainer
#66 lore raw

PATCH 66/112 ima: Fix potential memory leak in ima_init_crypto()

In reply to Greg Kroah-Hartman

From: Jianglei Nie <[email protected]>

[ Upstream commit 067d2521874135267e681c19d42761c601d503d6 ]

On failure to allocate the SHA1 tfm, IMA fails to initialize and exits without freeing the ima_algo_array. Add the missing kfree() for ima_algo_array to avoid the potential memory leak.

Fixes 6d94809af6b0 ("ima: Allocate and initialize tfm for each PCR bank")
---
 security/integrity/ima/ima_crypto.c | 1 +
 1 file changed, 1 insertion(+)
security/integrity/ima/ima_crypto.c +1 -0
index f6a7e9643b54..b1e5e7749e41 100644
@@ -205,6 +205,7 @@ int __init ima_init_crypto(void)
 
 		crypto_free_shash(ima_algo_array[i].tfm);
 	}
+	kfree(ima_algo_array);
 out:
 	crypto_free_shash(ima_shash_tfm);
 	return rc;
Signature · 1 line
2.35.1
author maintainer
#67 lore raw

PATCH 67/112 sfc: fix use after free when disabling sriov

In reply to Greg Kroah-Hartman

From: Íñigo Huguet <[email protected]>

[ Upstream commit ebe41da5d47ac0fff877e57bd14c54dccf168827 ]

Use after free is detected by kfence when disabling sriov. What was read after being freed was vf->pci_dev: it was freed from pci_disable_sriov and later read in efx_ef10_sriov_free_vf_vports, called from efx_ef10_sriov_free_vf_vswitching.

Set the pointer to NULL at release time to not trying to read it later.

Reproducer and dmesg log (note that kfence doesn't detect it every time):

$ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
$ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
 BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]

Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224):

  efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
  efx_ef10_pci_sriov_disable+0x38/0x70 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xfe/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k

allocated by task 6771 on cpu 10 at 3137.860196s:

  pci_alloc_dev+0x21/0x60
  pci_iov_add_virtfn+0x2a2/0x320
  sriov_enable+0x212/0x3e0
  efx_ef10_sriov_configure+0x67/0x80 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xba/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

freed by task 6771 on cpu 12 at 3170.991309s:

  device_release+0x34/0x90
  kobject_cleanup+0x3a/0x130
  pci_iov_remove_virtfn+0xd9/0x120
  sriov_disable+0x30/0xe0
  efx_ef10_pci_sriov_disable+0x57/0x70 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xfe/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes 3c5eb87605e85 ("sfc: create vports for VFs and assign random MAC addresses")
---
 drivers/net/ethernet/sfc/ef10_sriov.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/net/ethernet/sfc/ef10_sriov.c +7 -3
index 84041cd587d7..b44acb6e3953 100644
@@ -411,8 +411,9 @@ static int efx_ef10_pci_sriov_enable(struct efx_nic *efx, int num_vfs)
 static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
 {
 	struct pci_dev *dev = efx->pci_dev;
+	struct efx_ef10_nic_data *nic_data = efx->nic_data;
 	unsigned int vfs_assigned = pci_vfs_assigned(dev);
-	int rc = 0;
+	int i, rc = 0;
 
 	if (vfs_assigned && !force) {
 		netif_info(efx, drv, efx->net_dev, "VFs are assigned to guests; "
@@ -420,10 +421,13 @@ static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
 		return -EBUSY;
 	}
 
-	if (!vfs_assigned)
+	if (!vfs_assigned) {
+		for (i = 0; i < efx->vf_count; i++)
+			nic_data->vf[i].pci_dev = NULL;
 		pci_disable_sriov(dev);
-	else
+	} else {
 		rc = -EBUSY;
+	}
 
 	efx_ef10_sriov_free_vf_vswitching(efx);
 	efx->vf_count = 0;
Signature · 1 line
2.35.1
author maintainer
#68 lore raw

PATCH 68/112 seg6: fix skb checksum evaluation in SRH encapsulation/insertion

In reply to Greg Kroah-Hartman

From: Andrea Mayer <[email protected]>

[ Upstream commit df8386d13ea280d55beee1b95f61a59234a3798b ]

Support for SRH encapsulation and insertion was introduced with commit 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels"), through the seg6_do_srh_encap() and seg6_do_srh_inline() functions, respectively.
The former encapsulates the packet in an outer IPv6 header along with the SRH, while the latter inserts the SRH between the IPv6 header and the payload. Then, the headers are initialized/updated according to the operating mode (i.e., encap/inline).
Finally, the skb checksum is calculated to reflect the changes applied to the headers.

The IPv6 payload length ('payload_len') is not initialized within seg6_do_srh_{inline,encap}() but is deferred in seg6_do_srh(), i.e. the caller of seg6_do_srh_{inline,encap}().
However, this operation invalidates the skb checksum, since the 'payload_len' is updated only after the checksum is evaluated.

To solve this issue, the initialization of the IPv6 payload length is moved from seg6_do_srh() directly into the seg6_do_srh_{inline,encap}() functions and before the skb checksum update takes place.

Fixes 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
---
 net/ipv6/seg6_iptunnel.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
net/ipv6/seg6_iptunnel.c +4 -1
index 4d4399c5c5ea..40ac23242c37 100644
@@ -188,6 +188,8 @@ int seg6_do_srh_encap(struct sk_buff *skb, struct ipv6_sr_hdr *osrh, int proto)
 	}
 #endif
 
+	hdr->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
+
 	skb_postpush_rcsum(skb, hdr, tot_len);
 
 	return 0;
@@ -240,6 +242,8 @@ int seg6_do_srh_inline(struct sk_buff *skb, struct ipv6_sr_hdr *osrh)
 	}
 #endif
 
+	hdr->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
+
 	skb_postpush_rcsum(skb, hdr, sizeof(struct ipv6hdr) + hdrlen);
 
 	return 0;
@@ -301,7 +305,6 @@ static int seg6_do_srh(struct sk_buff *skb)
 		break;
 	}
 
-	ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
 	skb_set_transport_header(skb, sizeof(struct ipv6hdr));
 
 	return 0;
Signature · 1 line
2.35.1
author maintainer
#69 lore raw

PATCH 69/112 seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors

In reply to Greg Kroah-Hartman

From: Andrea Mayer <[email protected]>

[ Upstream commit f048880fc77058d864aff5c674af7918b30f312a ]

The SRv6 End.B6 and End.B6.Encaps behaviors rely on functions seg6_do_srh_{encap,inline}() to, respectively: i) encapsulate the packet within an outer IPv6 header with the specified Segment Routing Header (SRH); ii) insert the specified SRH directly after the IPv6 header of the packet.

This patch removes the initialization of the IPv6 header payload length from the input_action_end_b6{_encap}() functions, as it is now handled properly by seg6_do_srh_{encap,inline}() to avoid corruption of the skb checksum.

Fixes 140f04c33bbc ("ipv6: sr: implement several seg6local actions")
---
 net/ipv6/seg6_local.c | 2 --
 1 file changed, 2 deletions(-)
net/ipv6/seg6_local.c +0 -2
index eba23279912d..11f7da4139f6 100644
@@ -435,7 +435,6 @@ static int input_action_end_b6(struct sk_buff *skb, struct seg6_local_lwt *slwt)
 	if (err)
 		goto drop;
 
-	ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
 	skb_set_transport_header(skb, sizeof(struct ipv6hdr));
 
 	seg6_lookup_nexthop(skb, NULL, 0);
@@ -467,7 +466,6 @@ static int input_action_end_b6_encap(struct sk_buff *skb,
 	if (err)
 		goto drop;
 
-	ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
 	skb_set_transport_header(skb, sizeof(struct ipv6hdr));
 
 	seg6_lookup_nexthop(skb, NULL, 0);
Signature · 1 line
2.35.1
author maintainer
#70 lore raw

PATCH 70/112 seg6: bpf: fix skb checksum in bpf_push_seg6_encap()

In reply to Greg Kroah-Hartman

From: Andrea Mayer <[email protected]>

[ Upstream commit 4889fbd98deaf243c3baadc54e296d71c6af1eb0 ]

Both helper functions bpf_lwt_seg6_action() and bpf_lwt_push_encap() use the bpf_push_seg6_encap() to encapsulate the packet in an IPv6 with Segment Routing Header (SRH) or insert an SRH between the IPv6 header and the payload.
To achieve this result, such helper functions rely on bpf_push_seg6_encap() which, in turn, leverages seg6_do_srh_{encap,inline}() to perform the required operation (i.e. encap/inline).

This patch removes the initialization of the IPv6 header payload length from bpf_push_seg6_encap(), as it is now handled properly by seg6_do_srh_{encap,inline}() to prevent corruption of the skb checksum.

Fixes fe94cc290f53 ("bpf: Add IPv6 Segment Routing helpers")
---
 net/core/filter.c | 1 -
 1 file changed, 1 deletion(-)
net/core/filter.c +0 -1
index 246947fbc958..34ae30503ac4 100644
@@ -5624,7 +5624,6 @@ static int bpf_push_seg6_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len
 	if (err)
 		return err;
 
-	ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
 	skb_set_transport_header(skb, sizeof(struct ipv6hdr));
 
 	return seg6_lookup_nexthop(skb, NULL, 0);
Signature · 1 line
2.35.1
author maintainer
#71 lore raw

PATCH 71/112 sfc: fix kernel panic when creating VF

In reply to Greg Kroah-Hartman

From: Íñigo Huguet <[email protected]>

[ Upstream commit ada74c5539eba06cf8b47d068f92e0b3963a9a6e ]

When creating VFs a kernel panic can happen when calling to efx_ef10_try_update_nic_stats_vf.

When releasing a DMA coherent buffer, sometimes, I don't know in what specific circumstances, it has to unmap memory with vunmap. It is disallowed to do that in IRQ context or with BH disabled. Otherwise, we hit this line in vunmap, causing the crash:
BUG_ON(in_interrupt());

This patch reenables BH to release the buffer.

Log messages when the bug is hit:
kernel BUG at mm/vmalloc.c:2727!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI

 CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G          I      --------- ---  5.14.0-119.el9.x86_64 #1
 Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020
 RIP: 0010:vunmap+0x2e/0x30
 ...skip...
 Call Trace:
  __iommu_dma_free+0x96/0x100
  efx_nic_free_buffer+0x2b/0x40 [sfc]
  efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc]
  efx_ef10_update_stats_vf+0x18/0x40 [sfc]
  efx_start_all+0x15e/0x1d0 [sfc]
  efx_net_open+0x5a/0xe0 [sfc]
  __dev_open+0xe7/0x1a0
  __dev_change_flags+0x1d7/0x240
  dev_change_flags+0x21/0x60
  ...skip...
---
 drivers/net/ethernet/sfc/ef10.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/net/ethernet/sfc/ef10.c +3 -0
index fa1a872c4bc8..5b7413305be6 100644
@@ -1916,7 +1916,10 @@ static int efx_ef10_try_update_nic_stats_vf(struct efx_nic *efx)
 
 	efx_update_sw_stats(efx, stats);
 out:
+	/* releasing a DMA coherent buffer with BH disabled can panic */
+	spin_unlock_bh(&efx->stats_lock);
 	efx_nic_free_buffer(efx, &stats_buf);
+	spin_lock_bh(&efx->stats_lock);
 	return rc;
 }
 
Signature · 1 line
2.35.1
author maintainer
#72 lore raw

PATCH 72/112 net: atlantic: remove deep parameter on suspend/resume functions

In reply to Greg Kroah-Hartman

From: Chia-Lin Kao (AceLan) <[email protected]>

[ Upstream commit 0f33250760384e05c36466b0a2f92f3c6007ba92 ]

Below commit claims that atlantic NIC requires to reset the device on pm
op, and had set the deep to true for all suspend/resume functions.
commit 1809c30b6e5a ("net: atlantic: always deep reset on pm op, fixing up my null deref regression") So, we could remove deep parameter on suspend/resume functions without
any functional change.

Fixes 1809c30b6e5a ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
---
 .../ethernet/aquantia/atlantic/aq_pci_func.c  | 24 ++++++++-----------
 1 file changed, 10 insertions(+), 14 deletions(-)
drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c +10 -14
index fc5ea434a27c..8c05b2b79339 100644
@@ -385,7 +385,7 @@ static void aq_pci_shutdown(struct pci_dev *pdev)
 	}
 }
 
-static int aq_suspend_common(struct device *dev, bool deep)
+static int aq_suspend_common(struct device *dev)
 {
 	struct aq_nic_s *nic = pci_get_drvdata(to_pci_dev(dev));
 
@@ -398,17 +398,15 @@ static int aq_suspend_common(struct device *dev, bool deep)
 	if (netif_running(nic->ndev))
 		aq_nic_stop(nic);
 
-	if (deep) {
-		aq_nic_deinit(nic, !nic->aq_hw->aq_nic_cfg->wol);
-		aq_nic_set_power(nic);
-	}
+	aq_nic_deinit(nic, !nic->aq_hw->aq_nic_cfg->wol);
+	aq_nic_set_power(nic);
 
 	rtnl_unlock();
 
 	return 0;
 }
 
-static int atl_resume_common(struct device *dev, bool deep)
+static int atl_resume_common(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct aq_nic_s *nic;
@@ -421,10 +419,8 @@ static int atl_resume_common(struct device *dev, bool deep)
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 
-	if (deep) {
-		/* Reinitialize Nic/Vecs objects */
-		aq_nic_deinit(nic, !nic->aq_hw->aq_nic_cfg->wol);
-	}
+	/* Reinitialize Nic/Vecs objects */
+	aq_nic_deinit(nic, !nic->aq_hw->aq_nic_cfg->wol);
 
 	if (netif_running(nic->ndev)) {
 		ret = aq_nic_init(nic);
@@ -450,22 +446,22 @@ static int atl_resume_common(struct device *dev, bool deep)
 
 static int aq_pm_freeze(struct device *dev)
 {
-	return aq_suspend_common(dev, true);
+	return aq_suspend_common(dev);
 }
 
 static int aq_pm_suspend_poweroff(struct device *dev)
 {
-	return aq_suspend_common(dev, true);
+	return aq_suspend_common(dev);
 }
 
 static int aq_pm_thaw(struct device *dev)
 {
-	return atl_resume_common(dev, true);
+	return atl_resume_common(dev);
 }
 
 static int aq_pm_resume_restore(struct device *dev)
 {
-	return atl_resume_common(dev, true);
+	return atl_resume_common(dev);
 }
 
 static const struct dev_pm_ops aq_pm_ops = {
Signature · 1 line
2.35.1
author maintainer
#73 lore raw

PATCH 73/112 net: atlantic: remove aq_nic_deinit() when resume

In reply to Greg Kroah-Hartman

From: Chia-Lin Kao (AceLan) <[email protected]>

[ Upstream commit 2e15c51fefaffaf9f72255eaef4fada05055e4c5 ]

aq_nic_deinit() has been called while suspending, so we don't have to call it again on resume.
Actually, call it again leads to another hang issue when resuming from S3.

Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992345] Call Trace:
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992346] <TASK>
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992348] aq_nic_deinit+0xb4/0xd0 [atlantic]
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992356] aq_pm_thaw+0x7f/0x100 [atlantic]
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992362] pci_pm_resume+0x5c/0x90
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992366] ? pci_pm_thaw+0x80/0x80
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992368] dpm_run_callback+0x4e/0x120
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992371] device_resume+0xad/0x200
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992373] async_resume+0x1e/0x40
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992374] async_run_entry_fn+0x33/0x120
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992377] process_one_work+0x220/0x3c0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992380] worker_thread+0x4d/0x3f0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992382] ? process_one_work+0x3c0/0x3c0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992384] kthread+0x12a/0x150
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992386] ? set_kthread_struct+0x40/0x40
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992387] ret_from_fork+0x22/0x30
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992391] </TASK>
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992392] ---[ end trace 1ec8c79604ed5e0d ]---
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992394] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992397] atlantic 0000:02:00.0: PM: failed to resume async: error -110

Fixes 1809c30b6e5a ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
---
 drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c +0 -3
index 8c05b2b79339..a0ce213c473b 100644
@@ -419,9 +419,6 @@ static int atl_resume_common(struct device *dev)
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 
-	/* Reinitialize Nic/Vecs objects */
-	aq_nic_deinit(nic, !nic->aq_hw->aq_nic_cfg->wol);
-
 	if (netif_running(nic->ndev)) {
 		ret = aq_nic_init(nic);
 		if (ret)
Signature · 1 line
2.35.1
author maintainer
#74 lore raw

PATCH 74/112 KVM: x86: Fully initialize struct kvm_lapic_irq in kvm_pv_kick_cpu_op()

In reply to Greg Kroah-Hartman

From: Vitaly Kuznetsov <[email protected]>

[ Upstream commit 8a414f943f8b5f94bbaafdec863d6f3dbef33f8a ]

'vector' and 'trig_mode' fields of 'struct kvm_lapic_irq' are left uninitialized in kvm_pv_kick_cpu_op(). While these fields are normally not needed for APIC_DM_REMRD, they're still referenced by __apic_accept_irq() for trace_kvm_apic_accept_irq(). Fully initialize the structure to avoid consuming random stack memory.

Fixes a183b638b61c ("KVM: x86: make apic_accept_irq tracepoint more generic")
Reported-by [email protected]

Message-Id: <[email protected]>

---
 arch/x86/kvm/x86.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)
arch/x86/kvm/x86.c +10 -8
index da547752580a..c71f702c037d 100644
@@ -8142,15 +8142,17 @@ static int kvm_pv_clock_pairing(struct kvm_vcpu *vcpu, gpa_t paddr,
  */
 static void kvm_pv_kick_cpu_op(struct kvm *kvm, unsigned long flags, int apicid)
 {
-	struct kvm_lapic_irq lapic_irq;
-
-	lapic_irq.shorthand = APIC_DEST_NOSHORT;
-	lapic_irq.dest_mode = APIC_DEST_PHYSICAL;
-	lapic_irq.level = 0;
-	lapic_irq.dest_id = apicid;
-	lapic_irq.msi_redir_hint = false;
+	/*
+	 * All other fields are unused for APIC_DM_REMRD, but may be consumed by
+	 * common code, e.g. for tracing. Defer initialization to the compiler.
+	 */
+	struct kvm_lapic_irq lapic_irq = {
+		.delivery_mode = APIC_DM_REMRD,
+		.dest_mode = APIC_DEST_PHYSICAL,
+		.shorthand = APIC_DEST_NOSHORT,
+		.dest_id = apicid,
+	};
 
-	lapic_irq.delivery_mode = APIC_DM_REMRD;
 	kvm_irq_delivery_to_apic(kvm, NULL, &lapic_irq, NULL);
 }
 
Signature · 1 line
2.35.1
author maintainer
#75 lore raw

PATCH 75/112 net/tls: Check for errors in tls_device_init

In reply to Greg Kroah-Hartman

From: Tariq Toukan <[email protected]>

[ Upstream commit 3d8c51b25a235e283e37750943bbf356ef187230 ]

Add missing error checks in tls_device_init.

---
 include/net/tls.h    | 4 ++--
 net/tls/tls_device.c | 4 ++--
 net/tls/tls_main.c   | 7 ++++++-
 3 files changed, 10 insertions(+), 5 deletions(-)
include/net/tls.h +2 -2
index 745b3bc6ce91..d9cb597cab46 100644
@@ -707,7 +707,7 @@ int tls_sw_fallback_init(struct sock *sk,
 			 struct tls_crypto_info *crypto_info);
 
 #ifdef CONFIG_TLS_DEVICE
-void tls_device_init(void);
+int tls_device_init(void);
 void tls_device_cleanup(void);
 void tls_device_sk_destruct(struct sock *sk);
 int tls_set_device_offload(struct sock *sk, struct tls_context *ctx);
@@ -727,7 +727,7 @@ static inline bool tls_is_sk_rx_device_offloaded(struct sock *sk)
 	return tls_get_ctx(sk)->rx_conf == TLS_HW;
 }
 #else
-static inline void tls_device_init(void) {}
+static inline int tls_device_init(void) { return 0; }
 static inline void tls_device_cleanup(void) {}
 
 static inline int
net/tls/tls_device.c +2 -2
index 3c82286e5bcc..6ae2ce411b4b 100644
@@ -1390,9 +1390,9 @@ static struct notifier_block tls_dev_notifier = {
 	.notifier_call	= tls_dev_event,
 };
 
-void __init tls_device_init(void)
+int __init tls_device_init(void)
 {
-	register_netdevice_notifier(&tls_dev_notifier);
+	return register_netdevice_notifier(&tls_dev_notifier);
 }
 
 void __exit tls_device_cleanup(void)
net/tls/tls_main.c +6 -1
index 58d22d6b86ae..e537085b184f 100644
@@ -905,7 +905,12 @@ static int __init tls_register(void)
 	if (err)
 		return err;
 
-	tls_device_init();
+	err = tls_device_init();
+	if (err) {
+		unregister_pernet_subsys(&tls_proc_ops);
+		return err;
+	}
+
 	tcp_register_ulp(&tcp_tls_ulp_ops);
 
 	return 0;
Signature · 1 line
2.35.1
author maintainer
#76 lore raw

PATCH 76/112 mm: sysctl: fix missing numa_stat when !CONFIG_HUGETLB_PAGE

In reply to Greg Kroah-Hartman

From: Muchun Song <[email protected]>

[ Upstream commit 43b5240ca6b33108998810593248186b1e3ae34a ]

"numa_stat" should not be included in the scope of CONFIG_HUGETLB_PAGE, if CONFIG_HUGETLB_PAGE is not configured even if CONFIG_NUMA is configured, "numa_stat" is missed form /proc. Move it out of CONFIG_HUGETLB_PAGE to fix it.

Fixes 4518085e127d ("mm, sysctl: make NUMA stats configurable")
---
 kernel/sysctl.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)
kernel/sysctl.c +11 -9
index 642dc51b6503..f0dd1a3b66eb 100644
@@ -2814,6 +2814,17 @@ static struct ctl_table vm_table[] = {
 		.extra1		= SYSCTL_ZERO,
 		.extra2		= &two_hundred,
 	},
+#ifdef CONFIG_NUMA
+	{
+		.procname	= "numa_stat",
+		.data		= &sysctl_vm_numa_stat,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= sysctl_vm_numa_stat_handler,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+#endif
 #ifdef CONFIG_HUGETLB_PAGE
 	{
 		.procname	= "nr_hugepages",
@@ -2830,15 +2841,6 @@ static struct ctl_table vm_table[] = {
 		.mode           = 0644,
 		.proc_handler   = &hugetlb_mempolicy_sysctl_handler,
 	},
-	{
-		.procname		= "numa_stat",
-		.data			= &sysctl_vm_numa_stat,
-		.maxlen			= sizeof(int),
-		.mode			= 0644,
-		.proc_handler	= sysctl_vm_numa_stat_handler,
-		.extra1			= SYSCTL_ZERO,
-		.extra2			= SYSCTL_ONE,
-	},
 #endif
 	 {
 		.procname	= "hugetlb_shm_group",
Signature · 1 line
2.35.1
author maintainer
#77 lore raw

PATCH 77/112 virtio_mmio: Add missing PM calls to freeze/restore

In reply to Greg Kroah-Hartman

From: Stephan Gerhold <[email protected]>

[ Upstream commit ed7ac37fde33ccd84e4bd2b9363c191f925364c7 ]

Most virtio drivers provide freeze/restore callbacks to finish up device usage before suspend and to reinitialize the virtio device after resume. However, these callbacks are currently only called when using virtio_pci. virtio_mmio does not have any PM ops defined.

This causes problems for example after suspend to disk (hibernation), since the virtio devices might lose their state after the VMM is restarted. Calling virtio_device_freeze()/restore() ensures that the virtio devices are re-initialized correctly.

Fix this by implementing the dev_pm_ops for virtio_mmio, similar to virtio_pci_common.

Message-Id: <[email protected]>

---
 drivers/virtio/virtio_mmio.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
drivers/virtio/virtio_mmio.c +23 -0
index 5c970e6f664c..7dec1418bf7c 100644
@@ -62,6 +62,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/virtio.h>
@@ -543,6 +544,25 @@ static const struct virtio_config_ops virtio_mmio_config_ops = {
 	.get_shm_region = vm_get_shm_region,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int virtio_mmio_freeze(struct device *dev)
+{
+	struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
+
+	return virtio_device_freeze(&vm_dev->vdev);
+}
+
+static int virtio_mmio_restore(struct device *dev)
+{
+	struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
+
+	return virtio_device_restore(&vm_dev->vdev);
+}
+
+static const struct dev_pm_ops virtio_mmio_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(virtio_mmio_freeze, virtio_mmio_restore)
+};
+#endif
 
 static void virtio_mmio_release_dev(struct device *_d)
 {
@@ -787,6 +807,9 @@ static struct platform_driver virtio_mmio_driver = {
 		.name	= "virtio-mmio",
 		.of_match_table	= virtio_mmio_match,
 		.acpi_match_table = ACPI_PTR(virtio_mmio_acpi_match),
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &virtio_mmio_pm_ops,
+#endif
 	},
 };
 
Signature · 1 line
2.35.1
author maintainer
#78 lore raw

PATCH 78/112 virtio_mmio: Restore guest page size on resume

In reply to Greg Kroah-Hartman

From: Stephan Gerhold <[email protected]>

[ Upstream commit e0c2ce8217955537dd5434baeba061f209797119 ]

Virtio devices might lose their state when the VMM is restarted after a suspend to disk (hibernation) cycle. This means that the guest page size register must be restored for the virtio_mmio legacy interface, since otherwise the virtio queues are not functional.

This is particularly problematic for QEMU that currently still defaults to using the legacy interface for virtio_mmio. Write the guest page size register again in virtio_mmio_restore() to make legacy virtio_mmio devices work correctly after hibernation.

Message-Id: <[email protected]>

---
 drivers/virtio/virtio_mmio.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/virtio/virtio_mmio.c +3 -0
index 7dec1418bf7c..e8ef0c66e558 100644
@@ -556,6 +556,9 @@ static int virtio_mmio_restore(struct device *dev)
 {
 	struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
 
+	if (vm_dev->version == 1)
+		writel(PAGE_SIZE, vm_dev->base + VIRTIO_MMIO_GUEST_PAGE_SIZE);
+
 	return virtio_device_restore(&vm_dev->vdev);
 }
 
Signature · 1 line
2.35.1
author maintainer
#79 lore raw

PATCH 79/112 netfilter: br_netfilter: do not skip all hooks with 0 priority

In reply to Greg Kroah-Hartman

From: Florian Westphal <[email protected]>

[ Upstream commit c2577862eeb0be94f151f2f1fff662b028061b00 ]

When br_netfilter module is loaded, skbs may be diverted to the ipv4/ipv6 hooks, just like as if we were routing.

Unfortunately, bridge filter hooks with priority 0 may be skipped in this case.

Example:
1. an nftables bridge ruleset is loaded, with a prerouting hook that has priority 0.
2. interface is added to the bridge.
3. no tcp packet is ever seen by the bridge prerouting hook.
4. flush the ruleset
5. load the bridge ruleset again.
6. tcp packets are processed as expected.

After 1) the only registered hook is the bridge prerouting hook, but its not called yet because the bridge hasn't been brought up yet.

After 2), hook order is:
0 br_nf_pre_routing // br_netfilter internal hook 0 chain bridge f prerouting // nftables bridge ruleset

The packet is diverted to br_nf_pre_routing.
If call-iptables is off, the nftables bridge ruleset is called as expected.

But if its enabled, br_nf_hook_thresh() will skip it because it assumes that all 0-priority hooks had been called previously in bridge context.

To avoid this, check for the br_nf_pre_routing hook itself, we need to resume directly after it, even if this hook has a priority of 0.

Unfortunately, this still results in different packet flow. With this fix, the eval order after in 3) is:
1. br_nf_pre_routing
2. ip(6)tables (if enabled)
3. nftables bridge

but after 5 its the much saner:
1. nftables bridge
2. br_nf_pre_routing
3. ip(6)tables (if enabled)

Unfortunately I don't see a solution here:
It would be possible to move br_nf_pre_routing to a higher priority so that it will be called later in the pipeline, but this also impacts ebtables evaluation order, and would still result in this very ordering problem for all nftables-bridge hooks with the same priority as the br_nf_pre_routing one.

Searching back through the git history I don't think this has ever behaved in any other way, hence, no fixes-tag.

---
 net/bridge/br_netfilter_hooks.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)
net/bridge/br_netfilter_hooks.c +18 -3
index 68c0d0f92890..10a2c7bca719 100644
@@ -1012,9 +1012,24 @@ int br_nf_hook_thresh(unsigned int hook, struct net *net,
 		return okfn(net, sk, skb);
 
 	ops = nf_hook_entries_get_hook_ops(e);
-	for (i = 0; i < e->num_hook_entries &&
-	      ops[i]->priority <= NF_BR_PRI_BRNF; i++)
-		;
+	for (i = 0; i < e->num_hook_entries; i++) {
+		/* These hooks have already been called */
+		if (ops[i]->priority < NF_BR_PRI_BRNF)
+			continue;
+
+		/* These hooks have not been called yet, run them. */
+		if (ops[i]->priority > NF_BR_PRI_BRNF)
+			break;
+
+		/* take a closer look at NF_BR_PRI_BRNF. */
+		if (ops[i]->hook == br_nf_pre_routing) {
+			/* This hook diverted the skb to this function,
+			 * hooks after this have not been run yet.
+			 */
+			i++;
+			break;
+		}
+	}
 
 	nf_hook_state_init(&state, hook, NFPROTO_BRIDGE, indev, outdev,
 			   sk, net, okfn);
Signature · 1 line
2.35.1
author maintainer
#80 lore raw

PATCH 80/112 scsi: hisi_sas: Limit max hw sectors for v3 HW

In reply to Greg Kroah-Hartman

From: John Garry <[email protected]>

[ Upstream commit fce54ed027577517df1e74b7d54dc2b1bd536887 ]

If the controller is behind an IOMMU then the IOMMU IOVA caching range can affect performance, as discussed in [0].

Limit the max HW sectors to not exceed this limit. We need to hardcode the value until a proper DMA mapping API is available.

[0] https://lore.kernel.org/linux-iommu/[email protected]/

---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +7 -0
index cd41dc061d87..dfe7e6370d84 100644
@@ -2738,6 +2738,7 @@ static int slave_configure_v3_hw(struct scsi_device *sdev)
 	struct hisi_hba *hisi_hba = shost_priv(shost);
 	struct device *dev = hisi_hba->dev;
 	int ret = sas_slave_configure(sdev);
+	unsigned int max_sectors;
 
 	if (ret)
 		return ret;
@@ -2755,6 +2756,12 @@ static int slave_configure_v3_hw(struct scsi_device *sdev)
 		}
 	}
 
+	/* Set according to IOMMU IOVA caching limit */
+	max_sectors = min_t(size_t, queue_max_hw_sectors(sdev->request_queue),
+			    (PAGE_SIZE * 32) >> SECTOR_SHIFT);
+
+	blk_queue_max_hw_sectors(sdev->request_queue, max_sectors);
+
 	return 0;
 }
 
Signature · 1 line
2.35.1
author maintainer
#81 lore raw

PATCH 81/112 cpufreq: pmac32-cpufreq: Fix refcount leak bug

In reply to Greg Kroah-Hartman

From: Liang He <[email protected]>

[ Upstream commit ccd7567d4b6cf187fdfa55f003a9e461ee629e36 ]

In pmac_cpufreq_init_MacRISC3(), we need to add corresponding of_node_put() for the three node pointers whose refcount have been incremented by of_find_node_by_name().

---
 drivers/cpufreq/pmac32-cpufreq.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/cpufreq/pmac32-cpufreq.c +4 -0
index 73621bc11976..3704476bb83a 100644
@@ -471,6 +471,10 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 	if (slew_done_gpio_np)
 		slew_done_gpio = read_gpio(slew_done_gpio_np);
 
+	of_node_put(volt_gpio_np);
+	of_node_put(freq_gpio_np);
+	of_node_put(slew_done_gpio_np);
+
 	/* If we use the frequency GPIOs, calculate the min/max speeds based
 	 * on the bus frequencies
 	 */
Signature · 1 line
2.35.1
author maintainer
#82 lore raw

PATCH 82/112 platform/x86: hp-wmi: Ignore Sanitization Mode event

In reply to Greg Kroah-Hartman

From: Kai-Heng Feng <[email protected]>

[ Upstream commit 9ab762a84b8094540c18a170e5ddd6488632c456 ]

After system resume the hp-wmi driver may complain:

[ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0

According to HP it means 'Sanitization Mode' and it's harmless to just ignore the event.

---
 drivers/platform/x86/hp-wmi.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/platform/x86/hp-wmi.c +3 -0
index e94e59283ecb..012639f6d335 100644
@@ -62,6 +62,7 @@ enum hp_wmi_event_ids {
 	HPWMI_BACKLIT_KB_BRIGHTNESS	= 0x0D,
 	HPWMI_PEAKSHIFT_PERIOD		= 0x0F,
 	HPWMI_BATTERY_CHARGE_PERIOD	= 0x10,
+	HPWMI_SANITIZATION_MODE		= 0x17,
 };
 
 struct bios_args {
@@ -629,6 +630,8 @@ static void hp_wmi_notify(u32 value, void *context)
 		break;
 	case HPWMI_BATTERY_CHARGE_PERIOD:
 		break;
+	case HPWMI_SANITIZATION_MODE:
+		break;
 	default:
 		pr_info("Unknown event_id - %d - 0x%x\n", event_id, event_data);
 		break;
Signature · 1 line
2.35.1
author maintainer
#83 lore raw

PATCH 83/112 net: tipc: fix possible refcount leak in tipc_sk_create()

In reply to Greg Kroah-Hartman

From: Hangyu Hua <[email protected]>

[ Upstream commit 00aff3590fc0a73bddd3b743863c14e76fd35c0c ]

Free sk in case tipc_sk_insert() fails.

---
 net/tipc/socket.c | 1 +
 1 file changed, 1 insertion(+)
net/tipc/socket.c +1 -0
index 42283dc6c5b7..38256aabf4f1 100644
@@ -489,6 +489,7 @@ static int tipc_sk_create(struct net *net, struct socket *sock,
 	sock_init_data(sock, sk);
 	tipc_set_sk_state(sk, TIPC_OPEN);
 	if (tipc_sk_insert(tsk)) {
+		sk_free(sk);
 		pr_warn("Socket create failed; port number exhausted\n");
 		return -EINVAL;
 	}
Signature · 1 line
2.35.1
author maintainer
#84 lore raw

PATCH 84/112 NFC: nxp-nci: dont print header length mismatch on i2c error

In reply to Greg Kroah-Hartman

From: Michael Walle <[email protected]>

[ Upstream commit 9577fc5fdc8b07b891709af6453545db405e24ad ]

Don't print a misleading header length mismatch error if the i2c call returns an error. Instead just return the error code without any error message.

---
 drivers/nfc/nxp-nci/i2c.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/nfc/nxp-nci/i2c.c +6 -2
@@ -122,7 +122,9 @@ static int nxp_nci_i2c_fw_read(struct nx
 	skb_put_data(*skb, &header, NXP_NCI_FW_HDR_LEN);
 
 	r = i2c_master_recv(client, skb_put(*skb, frame_len), frame_len);
-	if (r != frame_len) {
+	if (r < 0) {
+		goto fw_read_exit_free_skb;
+	} else if (r != frame_len) {
 		nfc_err(&client->dev,
 			"Invalid frame length: %u (expected %zu)\n",
 			r, frame_len);
@@ -166,7 +168,9 @@ static int nxp_nci_i2c_nci_read(struct n
 		return 0;
 
 	r = i2c_master_recv(client, skb_put(*skb, header.plen), header.plen);
-	if (r != header.plen) {
+	if (r < 0) {
+		goto nci_read_exit_free_skb;
+	} else if (r != header.plen) {
 		nfc_err(&client->dev,
 			"Invalid frame payload length: %u (expected %u)\n",
 			r, header.plen);
author maintainer
#85 lore raw

PATCH 85/112 nvme-tcp: always fail a request when sending it failed

In reply to Greg Kroah-Hartman

From: Sagi Grimberg <[email protected]>

[ Upstream commit 41d07df7de841bfbc32725ce21d933ad358f2844 ]

queue stoppage and inflight requests cancellation is fully fenced from io_work and thus failing a request from this context. Hence we don't need to try to guess from the socket retcode if this failure is because the queue is about to be torn down or not.

We are perfectly safe to just fail it, the request will not be cancelled later on.

This solves possible very long shutdown delays when the users issues a 'nvme disconnect-all'

---
 drivers/nvme/host/tcp.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/nvme/host/tcp.c +1 -2
index 7e3932033707..d5e162f2c23a 100644
@@ -1149,8 +1149,7 @@ static int nvme_tcp_try_send(struct nvme_tcp_queue *queue)
 	} else if (ret < 0) {
 		dev_err(queue->ctrl->ctrl.device,
 			"failed to send request %d\n", ret);
-		if (ret != -EPIPE && ret != -ECONNRESET)
-			nvme_tcp_fail_request(queue->request);
+		nvme_tcp_fail_request(queue->request);
 		nvme_tcp_done_send_req(queue);
 	}
 	return ret;
Signature · 1 line
2.35.1
author maintainer
#86 lore raw

PATCH 86/112 nvme: fix regression when disconnect a recovering ctrl

In reply to Greg Kroah-Hartman

From: Ruozhu Li <[email protected]>

[ Upstream commit f7f70f4aa09dc43d7455c060143e86a017c30548 ]

We encountered a problem that the disconnect command hangs. After analyzing the log and stack, we found that the triggering process is as follows:
CPU0 CPU1
nvme_rdma_error_recovery_work
nvme_rdma_teardown_io_queues
nvme_do_delete_ctrl nvme_stop_queues
nvme_remove_namespaces
--clear ctrl->namespaces
nvme_start_queues --no ns in ctrl->namespaces
nvme_ns_remove return(because ctrl is deleting)
blk_freeze_queue
blk_mq_freeze_queue_wait
--wait for ns to unquiesce to clean infligt IO, hang forever

This problem was not found in older kernels because we will flush err work in nvme_stop_ctrl before nvme_remove_namespaces.It does not seem to be modified for functional reasons, the patch can be revert to solve the problem.

Revert commit 794a4cb3d2f7 ("nvme: remove the .stop_ctrl callout")

---
 drivers/nvme/host/core.c |  2 ++
 drivers/nvme/host/nvme.h |  1 +
 drivers/nvme/host/rdma.c | 12 +++++++++---
 drivers/nvme/host/tcp.c  | 10 +++++++---
 4 files changed, 19 insertions(+), 6 deletions(-)
drivers/nvme/host/core.c +2 -0
index af2902d70b19..ab060b4911ff 100644
@@ -4460,6 +4460,8 @@ void nvme_stop_ctrl(struct nvme_ctrl *ctrl)
 	nvme_stop_keep_alive(ctrl);
 	flush_work(&ctrl->async_event_work);
 	cancel_work_sync(&ctrl->fw_act_work);
+	if (ctrl->ops->stop_ctrl)
+		ctrl->ops->stop_ctrl(ctrl);
 }
 EXPORT_SYMBOL_GPL(nvme_stop_ctrl);
 
drivers/nvme/host/nvme.h +1 -0
index 8e40a6306e53..58cf9e39d613 100644
@@ -478,6 +478,7 @@ struct nvme_ctrl_ops {
 	void (*free_ctrl)(struct nvme_ctrl *ctrl);
 	void (*submit_async_event)(struct nvme_ctrl *ctrl);
 	void (*delete_ctrl)(struct nvme_ctrl *ctrl);
+	void (*stop_ctrl)(struct nvme_ctrl *ctrl);
 	int (*get_address)(struct nvme_ctrl *ctrl, char *buf, int size);
 };
 
drivers/nvme/host/rdma.c +9 -3
index 8eacc9bd58f5..b61924394032 100644
@@ -1057,6 +1057,14 @@ static void nvme_rdma_teardown_io_queues(struct nvme_rdma_ctrl *ctrl,
 	}
 }
 
+static void nvme_rdma_stop_ctrl(struct nvme_ctrl *nctrl)
+{
+	struct nvme_rdma_ctrl *ctrl = to_rdma_ctrl(nctrl);
+
+	cancel_work_sync(&ctrl->err_work);
+	cancel_delayed_work_sync(&ctrl->reconnect_work);
+}
+
 static void nvme_rdma_free_ctrl(struct nvme_ctrl *nctrl)
 {
 	struct nvme_rdma_ctrl *ctrl = to_rdma_ctrl(nctrl);
@@ -2236,9 +2244,6 @@ static const struct blk_mq_ops nvme_rdma_admin_mq_ops = {
 
 static void nvme_rdma_shutdown_ctrl(struct nvme_rdma_ctrl *ctrl, bool shutdown)
 {
-	cancel_work_sync(&ctrl->err_work);
-	cancel_delayed_work_sync(&ctrl->reconnect_work);
-
 	nvme_rdma_teardown_io_queues(ctrl, shutdown);
 	blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
 	if (shutdown)
@@ -2288,6 +2293,7 @@ static const struct nvme_ctrl_ops nvme_rdma_ctrl_ops = {
 	.submit_async_event	= nvme_rdma_submit_async_event,
 	.delete_ctrl		= nvme_rdma_delete_ctrl,
 	.get_address		= nvmf_get_address,
+	.stop_ctrl		= nvme_rdma_stop_ctrl,
 };
 
 /*
drivers/nvme/host/tcp.c +7 -3
index d5e162f2c23a..fe8c27bbc3f2 100644
@@ -2135,9 +2135,6 @@ static void nvme_tcp_error_recovery_work(struct work_struct *work)
 
 static void nvme_tcp_teardown_ctrl(struct nvme_ctrl *ctrl, bool shutdown)
 {
-	cancel_work_sync(&to_tcp_ctrl(ctrl)->err_work);
-	cancel_delayed_work_sync(&to_tcp_ctrl(ctrl)->connect_work);
-
 	nvme_tcp_teardown_io_queues(ctrl, shutdown);
 	blk_mq_quiesce_queue(ctrl->admin_q);
 	if (shutdown)
@@ -2177,6 +2174,12 @@ static void nvme_reset_ctrl_work(struct work_struct *work)
 	nvme_tcp_reconnect_or_remove(ctrl);
 }
 
+static void nvme_tcp_stop_ctrl(struct nvme_ctrl *ctrl)
+{
+	cancel_work_sync(&to_tcp_ctrl(ctrl)->err_work);
+	cancel_delayed_work_sync(&to_tcp_ctrl(ctrl)->connect_work);
+}
+
 static void nvme_tcp_free_ctrl(struct nvme_ctrl *nctrl)
 {
 	struct nvme_tcp_ctrl *ctrl = to_tcp_ctrl(nctrl);
@@ -2499,6 +2502,7 @@ static const struct nvme_ctrl_ops nvme_tcp_ctrl_ops = {
 	.submit_async_event	= nvme_tcp_submit_async_event,
 	.delete_ctrl		= nvme_tcp_delete_ctrl,
 	.get_address		= nvmf_get_address,
+	.stop_ctrl		= nvme_tcp_stop_ctrl,
 };
 
 static bool
Signature · 1 line
2.35.1
author maintainer
#87 lore raw

PATCH 87/112 net: sfp: fix memory leak in sfp_probe()

In reply to Greg Kroah-Hartman

From: Jianglei Nie <[email protected]>

[ Upstream commit 0a18d802d65cf662644fd1d369c86d84a5630652 ]

sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When devm_add_action() fails, sfp is not freed, which leads to a memory leak.

We should use devm_add_action_or_reset() instead of devm_add_action().

---
 drivers/net/phy/sfp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/phy/sfp.c +1 -1
index 96068e0d841a..dcbe278086dc 100644
@@ -2427,7 +2427,7 @@ static int sfp_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, sfp);
 
-	err = devm_add_action(sfp->dev, sfp_cleanup, sfp);
+	err = devm_add_action_or_reset(sfp->dev, sfp_cleanup, sfp);
 	if (err < 0)
 		return err;
 
Signature · 1 line
2.35.1
author maintainer
#88 lore raw

PATCH 88/112 ASoC: ops: Fix off by one in range control validation

In reply to Greg Kroah-Hartman

From: Mark Brown <[email protected]>

[ Upstream commit 5871321fb4558c55bf9567052b618ff0be6b975e ]

We currently report that range controls accept a range of 0..(max-min) but accept writes in the range 0..(max-min+1). Remove that extra +1.

---
 sound/soc/soc-ops.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/soc-ops.c +2 -2
index 15bfcdbdfaa4..0f26d6c31ce5 100644
@@ -517,7 +517,7 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 		return -EINVAL;
 	if (mc->platform_max && tmp > mc->platform_max)
 		return -EINVAL;
-	if (tmp > mc->max - mc->min + 1)
+	if (tmp > mc->max - mc->min)
 		return -EINVAL;
 
 	if (invert)
@@ -538,7 +538,7 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 			return -EINVAL;
 		if (mc->platform_max && tmp > mc->platform_max)
 			return -EINVAL;
-		if (tmp > mc->max - mc->min + 1)
+		if (tmp > mc->max - mc->min)
 			return -EINVAL;
 
 		if (invert)
Signature · 1 line
2.35.1
author maintainer
#89 lore raw

PATCH 89/112 pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux()

In reply to Greg Kroah-Hartman

From: Haowen Bai <[email protected]>

[ Upstream commit 84a85d3fef2e75b1fe9fc2af6f5267122555a1ed ]

pdesc could be null but still dereference pdesc->name and it will lead to a null pointer access. So we move a null check before dereference.

---
 drivers/pinctrl/aspeed/pinctrl-aspeed.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/pinctrl/aspeed/pinctrl-aspeed.c +2 -2
index 9c65d560d48f..e792318c3894 100644
@@ -235,11 +235,11 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
 		const struct aspeed_sig_expr **funcs;
 		const struct aspeed_sig_expr ***prios;
 
-		pr_debug("Muxing pin %s for %s\n", pdesc->name, pfunc->name);
-
 		if (!pdesc)
 			return -EINVAL;
 
+		pr_debug("Muxing pin %s for %s\n", pdesc->name, pfunc->name);
+
 		prios = pdesc->prios;
 
 		if (!prios)
Signature · 1 line
2.35.1
author maintainer
#90 lore raw

PATCH 90/112 ASoC: SOF: Intel: hda-loader: Clarify the cl_dsp_init() flow

In reply to Greg Kroah-Hartman

From: Peter Ujfalusi <[email protected]>

[ Upstream commit bbfef046c6613404c01aeb9e9928bebb78dd327a ]

Update the comment for the cl_dsp_init() to clarify what is done by the function and use the chip->init_core_mask instead of BIT(0) when unstalling/running the init core.

Complements: 2a68ff846164 ("ASoC: SOF: Intel: hda: Revisit IMR boot sequence")

---
 sound/soc/sof/intel/hda-loader.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
sound/soc/sof/intel/hda-loader.c +4 -4
index 347636a80b48..4012097a9d60 100644
@@ -79,9 +79,9 @@ static struct hdac_ext_stream *cl_stream_prepare(struct snd_sof_dev *sdev, unsig
 }
 
 /*
- * first boot sequence has some extra steps. core 0 waits for power
- * status on core 1, so power up core 1 also momentarily, keep it in
- * reset/stall and then turn it off
+ * first boot sequence has some extra steps.
+ * power on all host managed cores and only unstall/run the boot core to boot the
+ * DSP then turn off all non boot cores (if any) is powered on.
  */
 static int cl_dsp_init(struct snd_sof_dev *sdev, int stream_tag)
 {
@@ -115,7 +115,7 @@ static int cl_dsp_init(struct snd_sof_dev *sdev, int stream_tag)
 			  ((stream_tag - 1) << 9)));
 
 	/* step 3: unset core 0 reset state & unstall/run core 0 */
-	ret = hda_dsp_core_run(sdev, BIT(0));
+	ret = hda_dsp_core_run(sdev, chip->init_core_mask);
 	if (ret < 0) {
 		if (hda->boot_iteration == HDA_FW_BOOT_ATTEMPTS)
 			dev_err(sdev->dev,
Signature · 1 line
2.35.1
author maintainer
#91 lore raw

PATCH 91/112 ASoC: wm5110: Fix DRE control

In reply to Greg Kroah-Hartman

From: Charles Keepax <[email protected]>

[ Upstream commit 0bc0ae9a5938d512fd5d44f11c9c04892dcf4961 ]

The DRE controls on wm5110 should return a value of 1 if the DRE state is actually changed, update to fix this.

---
 sound/soc/codecs/wm5110.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
sound/soc/codecs/wm5110.c +6 -2
index 4238929b2375..d0cef982215d 100644
@@ -413,6 +413,7 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol,
 	unsigned int rnew = (!!ucontrol->value.integer.value[1]) << mc->rshift;
 	unsigned int lold, rold;
 	unsigned int lena, rena;
+	bool change = false;
 	int ret;
 
 	snd_soc_dapm_mutex_lock(dapm);
@@ -440,8 +441,8 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol,
 		goto err;
 	}
 
-	ret = regmap_update_bits(arizona->regmap, ARIZONA_DRE_ENABLE,
-				 mask, lnew | rnew);
+	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_DRE_ENABLE,
+				       mask, lnew | rnew, &change);
 	if (ret) {
 		dev_err(arizona->dev, "Failed to set DRE: %d\n", ret);
 		goto err;
@@ -454,6 +455,9 @@ static int wm5110_put_dre(struct snd_kcontrol *kcontrol,
 	if (!rnew && rold)
 		wm5110_clear_pga_volume(arizona, mc->rshift);
 
+	if (change)
+		ret = 1;
+
 err:
 	snd_soc_dapm_mutex_unlock(dapm);
 
Signature · 1 line
2.35.1
author maintainer
#92 lore raw

PATCH 92/112 ASoC: dapm: Initialise kcontrol data for mux/demux controls

In reply to Greg Kroah-Hartman

From: Charles Keepax <[email protected]>

[ Upstream commit 11d7a12f7f50baa5af9090b131c9b03af59503e7 ]

DAPM keeps a copy of the current value of mux/demux controls, however this value is only initialised in the case of autodisable controls. This leads to false notification events when first modifying a DAPM kcontrol that has a non-zero default.

Autodisable controls are left as they are, since they already initialise the value, and there would be more work required to support autodisable muxes where the first option isn't disabled and/or that isn't the default.

Technically this issue could affect mixer/switch elements as well, although not on any of the devices I am currently running. There is also a little more work to do to address the issue there due to that side supporting stereo controls, so that has not been tackled in this patch.

---
 sound/soc/soc-dapm.c | 5 +++++
 1 file changed, 5 insertions(+)
sound/soc/soc-dapm.c +5 -0
index f2f7f2dde93c..754c1f16ee83 100644
@@ -62,6 +62,8 @@ struct snd_soc_dapm_widget *
 snd_soc_dapm_new_control_unlocked(struct snd_soc_dapm_context *dapm,
 			 const struct snd_soc_dapm_widget *widget);
 
+static unsigned int soc_dapm_read(struct snd_soc_dapm_context *dapm, int reg);
+
 /* dapm power sequences - make this per codec in the future */
 static int dapm_up_seq[] = {
 	[snd_soc_dapm_pre] = 1,
@@ -442,6 +444,9 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget,
 
 			snd_soc_dapm_add_path(widget->dapm, data->widget,
 					      widget, NULL, NULL);
+		} else if (e->reg != SND_SOC_NOPM) {
+			data->value = soc_dapm_read(widget->dapm, e->reg) &
+				      (e->mask << e->shift_l);
 		}
 		break;
 	default:
Signature · 1 line
2.35.1
author maintainer
#93 lore raw

PATCH 93/112 ASoC: cs47l15: Fix event generation for low power mux control

In reply to Greg Kroah-Hartman

From: Charles Keepax <[email protected]>

[ Upstream commit 7f103af4a10f375b9b346b4d0b730f6a66b8c451 ]

cs47l15_in1_adc_put always returns zero regardless of if the control value was updated. This results in missing notifications to user-space of the control change. Update the handling to return 1 when the value is changed.

---
 sound/soc/codecs/cs47l15.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
sound/soc/codecs/cs47l15.c +4 -1
index 254f9d96e766..7c20642f160a 100644
@@ -122,6 +122,9 @@ static int cs47l15_in1_adc_put(struct snd_kcontrol *kcontrol,
 		snd_soc_kcontrol_component(kcontrol);
 	struct cs47l15 *cs47l15 = snd_soc_component_get_drvdata(component);
 
+	if (!!ucontrol->value.integer.value[0] == cs47l15->in1_lp_mode)
+		return 0;
+
 	switch (ucontrol->value.integer.value[0]) {
 	case 0:
 		/* Set IN1 to normal mode */
@@ -150,7 +153,7 @@ static int cs47l15_in1_adc_put(struct snd_kcontrol *kcontrol,
 		break;
 	}
 
-	return 0;
+	return 1;
 }
 
 static const struct snd_kcontrol_new cs47l15_snd_controls[] = {
Signature · 1 line
2.35.1
author maintainer
#94 lore raw

PATCH 94/112 ASoC: madera: Fix event generation for OUT1 demux

In reply to Greg Kroah-Hartman

From: Charles Keepax <[email protected]>

[ Upstream commit e3cabbef3db8269207a6b8808f510137669f8deb ]

madera_out1_demux_put returns the value of snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for the kcontrol. This is obviously different to the expected return a 1 if the control was updated value. This results in spurious notifications to user-space. Update the handling to only return a 1 when the value is changed.

---
 sound/soc/codecs/madera.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
sound/soc/codecs/madera.c +7 -1
index 680f31a6493a..a74c9b28368b 100644
@@ -618,7 +618,13 @@ int madera_out1_demux_put(struct snd_kcontrol *kcontrol,
 end:
 	snd_soc_dapm_mutex_unlock(dapm);
 
-	return snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
+	ret = snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
+	if (ret < 0) {
+		dev_err(madera->dev, "Failed to update demux power state: %d\n", ret);
+		return ret;
+	}
+
+	return change;
 }
 EXPORT_SYMBOL_GPL(madera_out1_demux_put);
 
Signature · 1 line
2.35.1
author maintainer
#95 lore raw

PATCH 95/112 ASoC: madera: Fix event generation for rate controls

In reply to Greg Kroah-Hartman

From: Charles Keepax <[email protected]>

[ Upstream commit 980555e95f7cabdc9c80a07107622b097ba23703 ]

madera_adsp_rate_put always returns zero regardless of if the control value was updated. This results in missing notifications to user-space of the control change. Update the handling to return 1 when the value is changed.

---
 sound/soc/codecs/madera.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
sound/soc/codecs/madera.c +3 -3
index a74c9b28368b..bbab4bc1f6b5 100644
@@ -899,7 +899,7 @@ static int madera_adsp_rate_put(struct snd_kcontrol *kcontrol,
 	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
 	const int adsp_num = e->shift_l;
 	const unsigned int item = ucontrol->value.enumerated.item[0];
-	int ret;
+	int ret = 0;
 
 	if (item >= e->items)
 		return -EINVAL;
@@ -916,10 +916,10 @@ static int madera_adsp_rate_put(struct snd_kcontrol *kcontrol,
 			 "Cannot change '%s' while in use by active audio paths\n",
 			 kcontrol->id.name);
 		ret = -EBUSY;
-	} else {
+	} else if (priv->adsp_rate_cache[adsp_num] != e->values[item]) {
 		/* Volatile register so defer until the codec is powered up */
 		priv->adsp_rate_cache[adsp_num] = e->values[item];
-		ret = 0;
+		ret = 1;
 	}
 
 	mutex_unlock(&priv->rate_lock);
Signature · 1 line
2.35.1
author maintainer
#96 lore raw

PATCH 96/112 irqchip: or1k-pic: Undefine mask_ack for level triggered hardware

In reply to Greg Kroah-Hartman

From: Stafford Horne <[email protected]>

[ Upstream commit 8520501346ed8d1c4a6dfa751cb57328a9c843f1 ]

The mask_ack operation clears the interrupt by writing to the PICSR register. This we don't want for level triggered interrupt because it does not actually clear the interrupt on the source hardware.

This was causing issues in qemu with multi core setups where interrupts would continue to fire even though they had been cleared in PICSR.

Just remove the mask_ack operation.

---
 drivers/irqchip/irq-or1k-pic.c | 1 -
 1 file changed, 1 deletion(-)
drivers/irqchip/irq-or1k-pic.c +0 -1
index 03d2366118dd..d5f1fabc45d7 100644
@@ -66,7 +66,6 @@ static struct or1k_pic_dev or1k_pic_level = {
 		.name = "or1k-PIC-level",
 		.irq_unmask = or1k_pic_unmask,
 		.irq_mask = or1k_pic_mask,
-		.irq_mask_ack = or1k_pic_mask_ack,
 	},
 	.handle = handle_level_irq,
 	.flags = IRQ_LEVEL | IRQ_NOPROBE,
Signature · 1 line
2.35.1
author maintainer
#97 lore raw

PATCH 97/112 x86: Clear .brk area at early boot

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

[ Upstream commit 38fa5479b41376dc9d7f57e71c83514285a25ca0 ]

The .brk section has the same properties as .bss: it is an alloc-only section and should be cleared before being used.

Not doing so is especially a problem for Xen PV guests, as the hypervisor will validate page tables (check for writable page tables and hypervisor private bits) before accepting them to be used.

Make sure .brk is initially zero by letting clear_bss() clear the brk area, too.

---
 arch/x86/kernel/head64.c | 2 ++
 1 file changed, 2 insertions(+)
arch/x86/kernel/head64.c +2 -0
index 05e117137b45..efe13ab366f4 100644
@@ -419,6 +419,8 @@ static void __init clear_bss(void)
 {
 	memset(__bss_start, 0,
 	       (unsigned long) __bss_stop - (unsigned long) __bss_start);
+	memset(__brk_base, 0,
+	       (unsigned long) __brk_limit - (unsigned long) __brk_base);
 }
 
 static unsigned long get_cmd_line_ptr(void)
Signature · 1 line
2.35.1
author maintainer
#98 lore raw

PATCH 98/112 soc: ixp4xx/npe: Fix unused match warning

In reply to Greg Kroah-Hartman

From: Linus Walleij <[email protected]>

[ Upstream commit 620f83b8326ce9706b1118334f0257ae028ce045 ]

The kernel test robot found this inconsistency:

  drivers/soc/ixp4xx/ixp4xx-npe.c:737:34: warning:
  'ixp4xx_npe_of_match' defined but not used [-Wunused-const-variable=]
     737 | static const struct of_device_id ixp4xx_npe_of_match[] = {

This is because the match is enclosed in the of_match_ptr() which compiles into NULL when OF is disabled and this is unnecessary.

Fix it by dropping of_match_ptr() around the match.

---
 drivers/soc/ixp4xx/ixp4xx-npe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/soc/ixp4xx/ixp4xx-npe.c +1 -1
index 6065aaab6740..8482a4892b83 100644
@@ -735,7 +735,7 @@ static const struct of_device_id ixp4xx_npe_of_match[] = {
 static struct platform_driver ixp4xx_npe_driver = {
 	.driver = {
 		.name           = "ixp4xx-npe",
-		.of_match_table = of_match_ptr(ixp4xx_npe_of_match),
+		.of_match_table = ixp4xx_npe_of_match,
 	},
 	.probe = ixp4xx_npe_probe,
 	.remove = ixp4xx_npe_remove,
Signature · 1 line
2.35.1
author maintainer
#99 lore raw

PATCH 99/112 ARM: dts: stm32: use the correct clock source for CEC on stm32mp151

In reply to Greg Kroah-Hartman

From: Gabriel Fernandez <[email protected]>

[ Upstream commit 78ece8cce1ba0c3f3e5a7c6c1b914b3794f04c44 ]

The peripheral clock of CEC is not LSE but CEC.

---
 arch/arm/boot/dts/stm32mp151.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/stm32mp151.dtsi +1 -1
index 7a0ef01de969..9919fc86bdc3 100644
@@ -543,7 +543,7 @@
 			compatible = "st,stm32-cec";
 			reg = <0x40016000 0x400>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CEC_K>, <&clk_lse>;
+			clocks = <&rcc CEC_K>, <&rcc CEC>;
 			clock-names = "cec", "hdmi-cec";
 			status = "disabled";
 		};
Signature · 1 line
2.35.1
author maintainer
#100 lore raw

PATCH 100/112 Revert "can: xilinx_can: Limit CANFD brp to 2"

In reply to Greg Kroah-Hartman

From: Srinivas Neeli <[email protected]>

[ Upstream commit c6da4590fe819dfe28a4f8037a8dc1e056542fb4 ]

This reverts commit 05ca14fdb6fe65614e0652d03e44b02748d25af7.

On early silicon engineering samples observed bit shrinking issue when we use brp as 1. Hence updated brp_min as 2. As in production silicon this issue is fixed, so reverting the patch.

---
 drivers/net/can/xilinx_can.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/can/xilinx_can.c +2 -2
index 1c42417810fc..1a3fba352cad 100644
@@ -259,7 +259,7 @@ static const struct can_bittiming_const xcan_bittiming_const_canfd2 = {
 	.tseg2_min = 1,
 	.tseg2_max = 128,
 	.sjw_max = 128,
-	.brp_min = 2,
+	.brp_min = 1,
 	.brp_max = 256,
 	.brp_inc = 1,
 };
@@ -272,7 +272,7 @@ static const struct can_bittiming_const xcan_data_bittiming_const_canfd2 = {
 	.tseg2_min = 1,
 	.tseg2_max = 16,
 	.sjw_max = 16,
-	.brp_min = 2,
+	.brp_min = 1,
 	.brp_max = 256,
 	.brp_inc = 1,
 };
Signature · 1 line
2.35.1
author maintainer
#101 lore raw

PATCH 101/112 nvme-pci: phison e16 has bogus namespace ids

In reply to Greg Kroah-Hartman

From: Keith Busch <[email protected]>

[ Upstream commit 73029c9b23cf1213e5f54c2b59efce08665199e7 ]

Add the quirk.

---
 drivers/nvme/host/pci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/nvme/host/pci.c +2 -1
index 3622c5c9515f..ce129655ef0a 100644
@@ -3234,7 +3234,8 @@ static const struct pci_device_id nvme_id_table[] = {
 				NVME_QUIRK_DISABLE_WRITE_ZEROES|
 				NVME_QUIRK_IGNORE_DEV_SUBNQN, },
 	{ PCI_DEVICE(0x1987, 0x5016),	/* Phison E16 */
-		.driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, },
+		.driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN |
+				NVME_QUIRK_BOGUS_NID, },
 	{ PCI_DEVICE(0x1b4b, 0x1092),	/* Lexar 256 GB SSD */
 		.driver_data = NVME_QUIRK_NO_NS_DESC_LIST |
 				NVME_QUIRK_IGNORE_DEV_SUBNQN, },
Signature · 1 line
2.35.1
author maintainer
#102 lore raw

PATCH 102/112 signal handling: dont use BUG_ON() for debugging

In reply to Greg Kroah-Hartman

From: Linus Torvalds <[email protected]>

[ Upstream commit a382f8fee42ca10c9bfce0d2352d4153f931f5dc ]

These are indeed "should not happen" situations, but it turns out recent changes made the 'task_is_stopped_or_trace()' case trigger (fix for that exists, is pending more testing), and the BUG_ON() makes it unnecessarily hard to actually debug for no good reason.

It's been that way for a long time, but let's make it clear: BUG_ON() is not good for debugging, and should never be used in situations where you could just say "this shouldn't happen, but we can continue".

Use WARN_ON_ONCE() instead to make sure it gets logged, and then just continue running. Instead of making the system basically unusuable because you crashed the machine while potentially holding some very core locks (eg this function is commonly called while holding 'tasklist_lock' for writing).

---
 kernel/signal.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
kernel/signal.c +4 -4
index 6bb2df4f6109..d05f783d5a5e 100644
@@ -1912,12 +1912,12 @@ bool do_notify_parent(struct task_struct *tsk, int sig)
 	bool autoreap = false;
 	u64 utime, stime;
 
-	BUG_ON(sig == -1);
+	WARN_ON_ONCE(sig == -1);
 
- 	/* do_notify_parent_cldstop should have been called instead.  */
- 	BUG_ON(task_is_stopped_or_traced(tsk));
+	/* do_notify_parent_cldstop should have been called instead.  */
+	WARN_ON_ONCE(task_is_stopped_or_traced(tsk));
 
-	BUG_ON(!tsk->ptrace &&
+	WARN_ON_ONCE(!tsk->ptrace &&
 	       (tsk->group_leader != tsk || !thread_group_empty(tsk)));
 
 	/* Wake up all pidfd waiters */
Signature · 1 line
2.35.1
author maintainer
#103 lore raw

PATCH 103/112 USB: serial: ftdi_sio: add Belimo device ids

In reply to Greg Kroah-Hartman

From: Lucien Buchmann <[email protected]>

commit 7c239a071d1f04b7137789810807b4108d475c72 upstream.

Those two product ids are known.

---
 drivers/usb/serial/ftdi_sio.c     |    3 +++
 drivers/usb/serial/ftdi_sio_ids.h |    6 ++++++
 2 files changed, 9 insertions(+)
drivers/usb/serial/ftdi_sio.c +3 -0
@@ -1023,6 +1023,9 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) },
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) },
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) },
+	/* Belimo Automation devices */
+	{ USB_DEVICE(FTDI_VID, BELIMO_ZTH_PID) },
+	{ USB_DEVICE(FTDI_VID, BELIMO_ZIP_PID) },
 	/* ICP DAS I-756xU devices */
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) },
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
drivers/usb/serial/ftdi_sio_ids.h +6 -0
@@ -1569,6 +1569,12 @@
 #define CHETCO_SEASMART_ANALOG_PID	0xA5AF /* SeaSmart Analog Adapter */
 
 /*
+ * Belimo Automation
+ */
+#define BELIMO_ZTH_PID			0x8050
+#define BELIMO_ZIP_PID			0xC811
+
+/*
  * Unjo AB
  */
 #define UNJO_VID			0x22B7
author maintainer
#104 lore raw

PATCH 104/112 usb: typec: add missing uevent when partner support PD

In reply to Greg Kroah-Hartman

From: Linyu Yuan <[email protected]>

commit 6fb9e1d94789e8ee5a258a23bc588693f743fd6c upstream.

System like Android allow user control power role from UI, it is possible to implement application base on typec uevent to refresh UI, but found there is chance that UI show different state from typec attribute file.

In typec_set_pwr_opmode(), when partner support PD, there is no uevent send to user space which cause the problem.

Fix it by sending uevent notification when change power mode to PD.

Fixes bdecb33af34f ("usb: typec: API for controlling USB Type-C Multiplexers")
---
 drivers/usb/typec/class.c |    1 +
 1 file changed, 1 insertion(+)
drivers/usb/typec/class.c +1 -0
@@ -1444,6 +1444,7 @@ void typec_set_pwr_opmode(struct typec_p
 			partner->usb_pd = 1;
 			sysfs_notify(&partner_dev->kobj, NULL,
 				     "supports_usb_power_delivery");
+			kobject_uevent(&partner_dev->kobj, KOBJ_CHANGE);
 		}
 		put_device(partner_dev);
 	}
author maintainer
#105 lore raw

PATCH 105/112 usb: dwc3: gadget: Fix event pending check

In reply to Greg Kroah-Hartman

From: Thinh Nguyen <[email protected]>

commit 7441b273388b9a59d8387a03ffbbca9d5af6348c upstream.

The DWC3_EVENT_PENDING flag is used to protect against invalid call to top-half interrupt handler, which can occur when there's a delay in software detection of the interrupt line deassertion.

However, the clearing of this flag was done prior to unmasking the interrupt line, creating opportunity where the top-half handler can come. This breaks the serialization and creates a race between the top-half and bottom-half handler, resulting in losing synchronization between the controller and the driver when processing events.

To fix this, make sure the clearing of the DWC3_EVENT_PENDING is done at the end of the bottom-half handler.

---
 drivers/usb/dwc3/gadget.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/dwc3/gadget.c +3 -1
@@ -3781,7 +3781,6 @@ static irqreturn_t dwc3_process_event_bu
 	}
 
 	evt->count = 0;
-	evt->flags &= ~DWC3_EVENT_PENDING;
 	ret = IRQ_HANDLED;
 
 	/* Unmask interrupt */
@@ -3794,6 +3793,9 @@ static irqreturn_t dwc3_process_event_bu
 		dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), dwc->imod_interval);
 	}
 
+	/* Keep the clearing of DWC3_EVENT_PENDING at the end */
+	evt->flags &= ~DWC3_EVENT_PENDING;
+
 	return ret;
 }
 
author maintainer
#106 lore raw

PATCH 106/112 tty: serial: samsung_tty: set dma burst_size to 1

In reply to Greg Kroah-Hartman

From: Chanho Park <[email protected]>

commit f7e35e4bf1e8dc2c8cbd5e0955dc1bd58558dae0 upstream.

The src_maxburst and dst_maxburst have been changed to 1 but the settings of the UCON register aren't changed yet. They should be changed as well according to the dmaengine slave config.

Fixes aa2f80e752c7 ("serial: samsung: fix maxburst parameter for DMA transactions")
Cc stable <[email protected]>
Cc Marek Szyprowski <[email protected]>
---
 drivers/tty/serial/samsung_tty.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/tty/serial/samsung_tty.c +2 -3
@@ -361,8 +361,7 @@ static void enable_tx_dma(struct s3c24xx
 	/* Enable tx dma mode */
 	ucon = rd_regl(port, S3C2410_UCON);
 	ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK);
-	ucon |= (dma_get_cache_alignment() >= 16) ?
-		S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1;
+	ucon |= S3C64XX_UCON_TXBURST_1;
 	ucon |= S3C64XX_UCON_TXMODE_DMA;
 	wr_regl(port,  S3C2410_UCON, ucon);
 
@@ -634,7 +633,7 @@ static void enable_rx_dma(struct s3c24xx
 			S3C64XX_UCON_DMASUS_EN |
 			S3C64XX_UCON_TIMEOUT_EN |
 			S3C64XX_UCON_RXMODE_MASK);
-	ucon |= S3C64XX_UCON_RXBURST_16 |
+	ucon |= S3C64XX_UCON_RXBURST_1 |
 			0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
 			S3C64XX_UCON_EMPTYINT_EN |
 			S3C64XX_UCON_TIMEOUT_EN |
author maintainer
#107 lore raw

PATCH 107/112 vt: fix memory overlapping when deleting chars in the buffer

In reply to Greg Kroah-Hartman

From: Yangxi Xiang <[email protected]>

commit 39cdb68c64d84e71a4a717000b6e5de208ee60cc upstream.

A memory overlapping copy occurs when deleting a long line. This memory overlapping copy can cause data corruption when scr_memcpyw is optimized to memcpy because memcpy does not ensure its behavior if the destination buffer overlaps with the source buffer. The line buffer is not always broken, because the memcpy utilizes the hardware acceleration, whose result is not deterministic.

Fix this problem by using replacing the scr_memcpyw with scr_memmovew.

Fixes 81732c3b2fed ("tty vt: Fix line garbage in virtual console on command line edition")
Cc stable <[email protected]>
---
 drivers/tty/vt/vt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/vt/vt.c +1 -1
@@ -855,7 +855,7 @@ static void delete_char(struct vc_data *
 	unsigned short *p = (unsigned short *) vc->vc_pos;
 
 	vc_uniscr_delete(vc, nr);
-	scr_memcpyw(p, p + nr, (vc->vc_cols - vc->state.x - nr) * 2);
+	scr_memmovew(p, p + nr, (vc->vc_cols - vc->state.x - nr) * 2);
 	scr_memsetw(p + vc->vc_cols - vc->state.x - nr, vc->vc_video_erase_char,
 			nr * 2);
 	vc->vc_need_wrap = 0;
author maintainer
#108 lore raw

PATCH 108/112 serial: 8250: fix return error code in serial8250_request_std_resource()

In reply to Greg Kroah-Hartman

From: Yi Yang <[email protected]>

commit 6e690d54cfa802f939cefbd2fa2c91bd0b8bd1b6 upstream.

If port->mapbase = NULL in serial8250_request_std_resource() , it need return a error code instead of 0. If uart_set_info() fail to request new regions by serial8250_request_std_resource() but the return value of serial8250_request_std_resource() is 0, The system incorrectly considers that the resource application is successful and does not attempt to restore the old setting. A null pointer reference is triggered when the port resource is later invoked.

---
 drivers/tty/serial/8250/8250_port.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/tty/serial/8250/8250_port.c +3 -1
@@ -2953,8 +2953,10 @@ static int serial8250_request_std_resour
 	case UPIO_MEM32BE:
 	case UPIO_MEM16:
 	case UPIO_MEM:
-		if (!port->mapbase)
+		if (!port->mapbase) {
+			ret = -EINVAL;
 			break;
+		}
 
 		if (!request_mem_region(port->mapbase, size, "serial")) {
 			ret = -EBUSY;
author maintainer
#109 lore raw

PATCH 109/112 serial: stm32: Clear prev values before setting RTS delays

In reply to Greg Kroah-Hartman

From: Ilpo Järvinen <[email protected]>

commit 5c5f44e36217de5ead789ff25da71c31c2331c96 upstream.

The code lacks clearing of previous DEAT/DEDT values. Thus, changing values on the fly results in garbage delays tending towards the maximum value as more and more bits are ORed together. (Leaving RS485 mode would have cleared the old values though).

Fixes 1bcda09d2910 ("serial: stm32: add support for RS485 hardware control mode")
Cc stable <[email protected]>
---
 drivers/tty/serial/stm32-usart.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/tty/serial/stm32-usart.c +2 -0
@@ -70,6 +70,8 @@ static void stm32_usart_config_reg_rs485
 	*cr3 |= USART_CR3_DEM;
 	over8 = *cr1 & USART_CR1_OVER8;
 
+	*cr1 &= ~(USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK);
+
 	if (over8)
 		rs485_deat_dedt = delay_ADE * baud * 8;
 	else
author maintainer
#110 lore raw

PATCH 110/112 serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle

In reply to Greg Kroah-Hartman

From: Ilpo Järvinen <[email protected]>

commit 211565b100993c90b53bf40851eacaefc830cfe0 upstream.

The driver must provide throttle and unthrottle in uart_ops when it sets UPSTAT_AUTORTS. Add them using existing stop_rx & enable_interrupts functions.

Fixes 2a76fa283098 (serial: pl011: Adopt generic flag to store auto RTS status)
Cc stable <[email protected]>
Cc Lukas Wunner <[email protected]>
---
 drivers/tty/serial/amba-pl011.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)
drivers/tty/serial/amba-pl011.c +21 -2
@@ -1326,6 +1326,15 @@ static void pl011_stop_rx(struct uart_po
 	pl011_dma_rx_stop(uap);
 }
 
+static void pl011_throttle_rx(struct uart_port *port)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	pl011_stop_rx(port);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
 static void pl011_enable_ms(struct uart_port *port)
 {
 	struct uart_amba_port *uap =
@@ -1717,9 +1726,10 @@ static int pl011_allocate_irq(struct uar
  */
 static void pl011_enable_interrupts(struct uart_amba_port *uap)
 {
+	unsigned long flags;
 	unsigned int i;
 
-	spin_lock_irq(&uap->port.lock);
+	spin_lock_irqsave(&uap->port.lock, flags);
 
 	/* Clear out any spuriously appearing RX interrupts */
 	pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR);
@@ -1741,7 +1751,14 @@ static void pl011_enable_interrupts(stru
 	if (!pl011_dma_rx_running(uap))
 		uap->im |= UART011_RXIM;
 	pl011_write(uap->im, uap, REG_IMSC);
-	spin_unlock_irq(&uap->port.lock);
+	spin_unlock_irqrestore(&uap->port.lock, flags);
+}
+
+static void pl011_unthrottle_rx(struct uart_port *port)
+{
+	struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port);
+
+	pl011_enable_interrupts(uap);
 }
 
 static int pl011_startup(struct uart_port *port)
@@ -2116,6 +2133,8 @@ static const struct uart_ops amba_pl011_
 	.stop_tx	= pl011_stop_tx,
 	.start_tx	= pl011_start_tx,
 	.stop_rx	= pl011_stop_rx,
+	.throttle	= pl011_throttle_rx,
+	.unthrottle	= pl011_unthrottle_rx,
 	.enable_ms	= pl011_enable_ms,
 	.break_ctl	= pl011_break_ctl,
 	.startup	= pl011_startup,
author maintainer
#111 lore raw

PATCH 111/112 serial: 8250: Fix PM usage_count for console handover

In reply to Greg Kroah-Hartman

From: Ilpo Järvinen <[email protected]>

commit f9b11229b79c0fb2100b5bb4628a101b1d37fbf6 upstream.

When console is enabled, univ8250_console_setup() calls serial8250_console_setup() before .dev is set to uart_port. Therefore, it will not call pm_runtime_get_sync(). Later, when the actual driver is going to take over univ8250_console_exit() is called. As .dev is already set, serial8250_console_exit() makes pm_runtime_put_sync() call with usage count being zero triggering PM usage count warning (extra debug for univ8250_console_setup(), univ8250_console_exit(), and serial8250_register_ports()):

[    0.068987] univ8250_console_setup ttyS0 nodev
[    0.499670] printk: console [ttyS0] enabled
[    0.717955] printk: console [ttyS0] printing thread started
[    1.960163] serial8250_register_ports assigned dev for ttyS0
[    1.976830] printk: console [ttyS0] disabled
[    1.976888] printk: console [ttyS0] printing thread stopped
[    1.977073] univ8250_console_exit ttyS0 usage:0
[    1.977075] serial8250 serial8250: Runtime PM usage count underflow!
[    1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A
[    1.977812] univ8250_console_setup ttyS0 usage:2
[    1.978167] printk: console [ttyS0] printing thread started
[    1.978203] printk: console [ttyS0] enabled

To fix the issue, call pm_runtime_get_sync() in serial8250_register_ports() as soon as .dev is set for an uart_port if it has console enabled.

This problem became apparent only recently because 82586a721595 ("PM:
runtime: Avoid device usage count underflows") added the warning printout. I confirmed this problem also occurs with v5.18 (w/o the warning printout, obviously).

Fixes bedb404e91bb ("serial: 8250_port: Don't use power management for kernel console")
Cc stable <[email protected]>
---
 drivers/tty/serial/8250/8250_core.c |    4 ++++
 drivers/tty/serial/serial_core.c    |    5 -----
 include/linux/serial_core.h         |    5 +++++
 3 files changed, 9 insertions(+), 5 deletions(-)
drivers/tty/serial/8250/8250_core.c +4 -0
@@ -23,6 +23,7 @@
 #include <linux/sysrq.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/tty.h>
 #include <linux/ratelimit.h>
 #include <linux/tty_flip.h>
@@ -571,6 +572,9 @@ serial8250_register_ports(struct uart_dr
 
 		up->port.dev = dev;
 
+		if (uart_console_enabled(&up->port))
+			pm_runtime_get_sync(up->port.dev);
+
 		serial8250_apply_quirks(up);
 		uart_add_one_port(drv, &up->port);
 	}
drivers/tty/serial/serial_core.c +0 -5
@@ -1941,11 +1941,6 @@ static int uart_proc_show(struct seq_fil
 }
 #endif
 
-static inline bool uart_console_enabled(struct uart_port *port)
-{
-	return uart_console(port) && (port->cons->flags & CON_ENABLED);
-}
-
 static void uart_port_spin_lock_init(struct uart_port *port)
 {
 	spin_lock_init(&port->lock);
include/linux/serial_core.h +5 -0
@@ -394,6 +394,11 @@ static const bool earlycon_acpi_spcr_ena
 static inline int setup_earlycon(char *buf) { return 0; }
 #endif
 
+static inline bool uart_console_enabled(struct uart_port *port)
+{
+	return uart_console(port) && (port->cons->flags & CON_ENABLED);
+}
+
 struct uart_port *uart_get_console(struct uart_port *ports, int nr,
 				   struct console *c);
 int uart_parse_earlycon(char *p, unsigned char *iotype, resource_size_t *addr,
author maintainer
#112 lore raw

PATCH 112/112 x86/pat: Fix x86_has_pat_wp()

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

commit 230ec83d4299b30c51a1c133b4f2a669972cc08a upstream.

x86_has_pat_wp() is using a wrong test, as it relies on the normal PAT configuration used by the kernel. In case the PAT MSR has been setup by another entity (e.g. Xen hypervisor) it might return false even if the PAT configuration is allowing WP mappings. This due to the fact that when running as Xen PV guest the PAT MSR is setup by the hypervisor and cannot be changed by the guest. This results in the WP related entry to be at a different position when running as Xen PV guest compared to the bare metal or fully virtualized case.

The correct way to test for WP support is:

1. Get the PTE protection bits needed to select WP mode by reading __cachemode2pte_tbl[_PAGE_CACHE_MODE_WP] (depending on the PAT MSR setting this might return protection bits for a stronger mode, e.g. UC-)
2. Translate those bits back into the real cache mode selected by those PTE bits by reading __pte2cachemode_tbl[__pte2cm_idx(prot)]
3. Test for the cache mode to be _PAGE_CACHE_MODE_WP

Fixes f88a68facd9a ("x86/mm: Extend early_memremap() support with additional attrs")
Cc <[email protected]> # 4.14
---
 arch/x86/mm/init.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
arch/x86/mm/init.c +12 -2
@@ -78,10 +78,20 @@ static uint8_t __pte2cachemode_tbl[8] =
 	[__pte2cm_idx(_PAGE_PWT | _PAGE_PCD | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC,
 };
 
-/* Check that the write-protect PAT entry is set for write-protect */
+/*
+ * Check that the write-protect PAT entry is set for write-protect.
+ * To do this without making assumptions how PAT has been set up (Xen has
+ * another layout than the kernel), translate the _PAGE_CACHE_MODE_WP cache
+ * mode via the __cachemode2pte_tbl[] into protection bits (those protection
+ * bits will select a cache mode of WP or better), and then translate the
+ * protection bits back into the cache mode using __pte2cm_idx() and the
+ * __pte2cachemode_tbl[] array. This will return the really used cache mode.
+ */
 bool x86_has_pat_wp(void)
 {
-	return __pte2cachemode_tbl[_PAGE_CACHE_MODE_WP] == _PAGE_CACHE_MODE_WP;
+	uint16_t prot = __cachemode2pte_tbl[_PAGE_CACHE_MODE_WP];
+
+	return __pte2cachemode_tbl[__pte2cm_idx(prot)] == _PAGE_CACHE_MODE_WP;
 }
 
 enum page_cache_mode pgprot2cachemode(pgprot_t pgprot)
Tested-by on the v1 series
#113 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.132 release. There are 112 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.132-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels and built tested with BMIPS_GENERIC (bmips_stb_defconfig):

Signature · 1 line
Florian
Tested-by Hulk Robot on the v1 series
#114 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.132 release. There are 112 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.132-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

Tested on arm64 and x86 for 5.10.132-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.132-rc1
Commit: 8296edeecf14fdc10dec6ff8fc5f68aeacb3c635
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9022
passed: 9022
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9022
passed: 9022
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by on the v1 series
#115 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.132 release. There are 112 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000. Anything received after that time might be too late.

Build results:

	total: 163 pass: 163 fail: 0
Qemu test results:
	total: 477 pass: 477 fail: 0

Guenter

maintainer Tested-by on the v1 series
#116 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.132 release. There are 112 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.132-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v5.10:

    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    75 tests:	75 pass, 0 fail

Linux version: 5.10.132-rc1-g024476cf51e8
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Jon

Tested-by Linux Kernel Functional Testing on the v1 series
#117 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.132 release. There are 112 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.132-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 5.10.132-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.10.y
* git commit: 024476cf51e88407e84736ff298652322459beb5
* git describe: v5.10.131-113-g024476cf51e8
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.131-113-g024476cf51e8

## Test Regressions (compared to v5.10.131)
No test regressions found.

## Metric Regressions (compared to v5.10.131)
No metric regressions found.

## Test Fixes (compared to v5.10.131)
No test fixes found.

## Metric Fixes (compared to v5.10.131)
No metric fixes found.

## Test result summary
total: 135505, pass: 122210, fail: 509, skip: 11957, xfail: 829

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 308 total, 308 passed, 0 failed
* arm64: 62 total, 60 passed, 2 failed
* i386: 52 total, 50 passed, 2 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 51 total, 51 passed, 0 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 56 total, 54 passed, 2 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Tested-by Sudip Mukherjee on the v1 series
#118 lore raw
In reply to Greg Kroah-Hartman

Hi Greg,

Quoted 7 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.132 release. There are 112 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 21 Jul 2022 11:43:40 +0000. Anything received after that time might be too late.

Build test (gcc version 11.3.1 20220706):
mips: 63 configs -> no failure
arm: 104 configs -> no failure
arm64: 3 configs -> no failure
x86_64: 4 configs -> no failure alpha allmodconfig -> no failure powerpc allmodconfig -> no failure riscv allmodconfig -> no failure s390 allmodconfig -> no failure xtensa allmodconfig -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]

[1]. https://openqa.qa.codethink.co.uk/tests/1521
[2]. https://openqa.qa.codethink.co.uk/tests/1529

--
Regards
Sudip