Skip to contentSkip to conversation

multipath-tools: remove list of rebranded arrays vendors from man page

PATCH In review Xose Vazquez Perez 2 participants 2 messages Jul 21, 2022 – Jul 25, 2022 Device mapper

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 multipath-tools: remove list of rebranded arrays vendors from man page

It does not provide useful info, and it is incomplete.

Cc Martin Wilck <[email protected]>
Cc Benjamin Marzinski <[email protected]>
Cc Christophe Varoqui <[email protected]>
Cc DM-DEVEL ML <[email protected]>
---
 multipath/multipath.conf.5 | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
multipath/multipath.conf.5 +4 -4
index c2d34f18..d5506d99 100644
@@ -315,12 +315,12 @@ accepts the optional prio_arg \fIexclusive_pref_bit\fR.
 .TP
 .I ontap
 (Hardware-dependent)
-Generate the path priority for NetApp ONTAP class and OEM arrays as IBM NSeries.
+Generate the path priority for NetApp ONTAP class, and rebranded arrays.
 .TP
 .I rdac
 (Hardware-dependent)
 Generate the path priority for LSI/Engenio/NetApp RDAC class as NetApp SANtricity
-E/EF Series, and OEM arrays from IBM DELL SGI STK and SUN.
+E/EF Series, and rebranded arrays.
 .TP
 .I hp_sw
 (Hardware-dependent)
@@ -496,7 +496,7 @@ Active/Standby mode exclusively.
 .I rdac
 (Hardware-dependent)
 Check the path state for LSI/Engenio/NetApp RDAC class as NetApp SANtricity E/EF
-Series, and OEM arrays from IBM DELL SGI STK and SUN.
+Series, and rebranded arrays.
 .TP
 .I directio
 Read the first sector with direct I/O. This checker could cause spurious path
@@ -1568,7 +1568,7 @@ families.
 .I 1 rdac
 (Hardware-dependent)
 Hardware handler for LSI/Engenio/NetApp RDAC class as NetApp SANtricity E/EF
-Series, and OEM arrays from IBM DELL SGI STK and SUN.
+Series, and rebranded arrays.
 .TP
 .I 1 hp_sw
 (Hardware-dependent)
Signature · 6 lines
2.37.1

--
dm-devel mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/dm-devel
maintainer Reviewed-by on v1 1/1
#1 lore raw
Quoted 2 lines · Xose Vazquez Perez

It does not provide useful info, and it is incomplete.

Quoted 48 lines
Cc Martin Wilck <[email protected]>
Cc Benjamin Marzinski <[email protected]>
Cc Christophe Varoqui <[email protected]>
Cc DM-DEVEL ML <[email protected]>
---
 multipath/multipath.conf.5 | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
multipath/multipath.conf.5 +4 -4
index c2d34f18..d5506d99 100644
@@ -315,12 +315,12 @@ accepts the optional prio_arg \fIexclusive_pref_bit\fR.
 .TP
 .I ontap
 (Hardware-dependent)
-Generate the path priority for NetApp ONTAP class and OEM arrays as IBM NSeries.
+Generate the path priority for NetApp ONTAP class, and rebranded arrays.
 .TP
 .I rdac
 (Hardware-dependent)
 Generate the path priority for LSI/Engenio/NetApp RDAC class as NetApp SANtricity
-E/EF Series, and OEM arrays from IBM DELL SGI STK and SUN.
+E/EF Series, and rebranded arrays.
 .TP
 .I hp_sw
 (Hardware-dependent)
@@ -496,7 +496,7 @@ Active/Standby mode exclusively.
 .I rdac
 (Hardware-dependent)
 Check the path state for LSI/Engenio/NetApp RDAC class as NetApp SANtricity E/EF
-Series, and OEM arrays from IBM DELL SGI STK and SUN.
+Series, and rebranded arrays.
 .TP
 .I directio
 Read the first sector with direct I/O. This checker could cause spurious path
@@ -1568,7 +1568,7 @@ families.
 .I 1 rdac
 (Hardware-dependent)
 Hardware handler for LSI/Engenio/NetApp RDAC class as NetApp SANtricity E/EF
-Series, and OEM arrays from IBM DELL SGI STK and SUN.
+Series, and rebranded arrays.
 .TP
 .I 1 hp_sw
 (Hardware-dependent)
Signature · 1 line
2.37.1

--
dm-devel mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/dm-devel