Skip to contentSkip to conversation

drm/amdgpu: add a compute pipe reset for RS64

PATCH New Horace Chen 1 participant 1 message Jul 25, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 3/6 drm/amdgpu: add a compute pipe reset for RS64

[Why]
Under SR-IOV, we are not sure whether pipe status is good or not when doing initialization. The compute engine maybe fail to bringup if pipe status is bad.

[How]
Do an RS64 pipe reset for MEC before we do initialization. Also apply to bare-metal.

---
 drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c +15 -0
index 0d8193b30fc5..75556370028e 100644
@@ -2754,6 +2754,21 @@ static void gfx_v11_0_config_gfx_rs64(struct amdgpu_device *adev)
 					mec_hdr->ucode_start_addr_hi >> 2);
 	}
 	soc21_grbm_select(adev, 0, 0, 0, 0);
+
+	/* reset mec pipe */
+	tmp = RREG32_SOC15(GC, 0, regCP_MEC_RS64_CNTL);
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE0_RESET, 1);
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE1_RESET, 1);
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE2_RESET, 1);
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE3_RESET, 1);
+	WREG32_SOC15(GC, 0, regCP_MEC_RS64_CNTL, tmp);
+
+	/* clear mec pipe reset */
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE0_RESET, 0);
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE1_RESET, 0);
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE2_RESET, 0);
+	tmp = REG_SET_FIELD(tmp, CP_MEC_RS64_CNTL, MEC_PIPE3_RESET, 0);
+	WREG32_SOC15(GC, 0, regCP_MEC_RS64_CNTL, tmp);
 }
 
 static int gfx_v11_0_wait_for_rlc_autoload_complete(struct amdgpu_device *adev)
Signature · 1 line
2.25.1