Skip to contentSkip to conversation

iio: humidity: hdc100x: add manufacturer and device ID check

PATCH Superseded Potin Lai 2 participants 5 messages Jul 28, 2022 1 message not in the archive IIO

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Potin Lai

author
#0 lore raw

v4 cover iio: humidity: hdc100x: add manufacturer and device ID check

In this patch series, we move the callback from probe to probe_new, and add manufacturer and device ID check for hdc100x driver.

changes v1 --> v2:
- fix typo in commit message
- change to use probe_new
- use device_get_match_data instead of i2c_of_match_device

changes v2 --> v3:
- move probe_new part into a separate patch
- remove unsed variable
- remove redundant checking of matched data

changes v3 --> v4:
- move ID support checking to probe()
- add hdc100x_chip_data pointer into hdc100x_data for accessing in future

Potin Lai (2):
iio: humidity: hdc100x: switch to probe_new callback
iio: humidity: hdc100x: add manufacturer and device ID check

 drivers/iio/humidity/hdc100x.c | 74 +++++++++++++++++++++++++++-------
 1 file changed, 60 insertions(+), 14 deletions(-)
Signature · 1 line
2.31.1
author
#1 lore raw

PATCH v4 1/2 iio: humidity: hdc100x: switch to probe_new callback

Switch to probe_new callback due to probe is deprecated soon.

---
 drivers/iio/humidity/hdc100x.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/iio/humidity/hdc100x.c +2 -3
index 9e0fce917ce4c..0d514818635cb 100644
@@ -351,8 +351,7 @@ static const struct iio_info hdc100x_info = {
 	.attrs = &hdc100x_attribute_group,
 };
 
-static int hdc100x_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int hdc100x_probe(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev;
 	struct hdc100x_data *data;
@@ -422,7 +421,7 @@ static struct i2c_driver hdc100x_driver = {
 		.name	= "hdc100x",
 		.of_match_table = hdc100x_dt_ids,
 	},
-	.probe = hdc100x_probe,
+	.probe_new = hdc100x_probe,
 	.id_table = hdc100x_id,
 };
 module_i2c_driver(hdc100x_driver);
Signature · 1 line
2.31.1
author
#2 lore raw

PATCH v4 2/2 iio: humidity: hdc100x: add manufacturer and device ID check

In reply to Potin Lai

Add manufacturer and device ID checking during probe, and skip the checking if chip model not supported.

Supported:
- HDC1000
- HDC1010
- HDC1050
- HDC1080

Not supported:
- HDC1008

---
 drivers/iio/humidity/hdc100x.c | 69 ++++++++++++++++++++++++++++------
 1 file changed, 58 insertions(+), 11 deletions(-)
drivers/iio/humidity/hdc100x.c +58 -11
index 0d514818635cb..be1244577921d 100644
@@ -34,7 +34,25 @@
 #define HDC100X_REG_CONFIG_ACQ_MODE		BIT(12)
 #define HDC100X_REG_CONFIG_HEATER_EN		BIT(13)
 
+#define HDC100X_REG_MFR_ID	0xFE
+#define HDC100X_REG_DEV_ID	0xFF
+
+#define HDC100X_MFR_ID	0x5449
+
+struct hdc100x_chip_data {
+	bool support_mfr_check;
+};
+
+static const struct hdc100x_chip_data hdc100x_chip_data = {
+	.support_mfr_check	= true,
+};
+
+static const struct hdc100x_chip_data hdc1008_chip_data = {
+	.support_mfr_check	= false,
+};
+
 struct hdc100x_data {
+	const struct hdc100x_chip_data *chip_data;
 	struct i2c_client *client;
 	struct mutex lock;
 	u16 config;
@@ -351,8 +369,32 @@ static const struct iio_info hdc100x_info = {
 	.attrs = &hdc100x_attribute_group,
 };
 
+static int hdc100x_read_mfr_id(struct i2c_client *client)
+{
+	return i2c_smbus_read_word_swapped(client, HDC100X_REG_MFR_ID);
+}
+
+static int hdc100x_read_dev_id(struct i2c_client *client)
+{
+	return i2c_smbus_read_word_swapped(client, HDC100X_REG_DEV_ID);
+}
+
+static bool is_valid_hdc100x(struct i2c_client *client)
+{
+	int mfr_id, dev_id;
+
+	mfr_id = hdc100x_read_mfr_id(client);
+	dev_id = hdc100x_read_dev_id(client);
+	if (mfr_id == HDC100X_MFR_ID &&
+	   (dev_id == 0x1000 || dev_id == 0x1050))
+		return true;
+
+	return false;
+}
+
 static int hdc100x_probe(struct i2c_client *client)
 {
+	const struct hdc100x_chip_data *chip_data;
 	struct iio_dev *indio_dev;
 	struct hdc100x_data *data;
 	int ret;
@@ -361,6 +403,10 @@ static int hdc100x_probe(struct i2c_client *client)
 				     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
 		return -EOPNOTSUPP;
 
+	chip_data = device_get_match_data(&client->dev);
+	if (chip_data->support_mfr_check && !is_valid_hdc100x(client))
+		return -EINVAL;
+
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
@@ -368,6 +414,7 @@ static int hdc100x_probe(struct i2c_client *client)
 	data = iio_priv(indio_dev);
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
+	data->chip_data = chip_data;
 	mutex_init(&data->lock);
 
 	indio_dev->name = dev_name(&client->dev);
@@ -396,22 +443,22 @@ static int hdc100x_probe(struct i2c_client *client)
 }
 
 static const struct i2c_device_id hdc100x_id[] = {
-	{ "hdc100x", 0 },
-	{ "hdc1000", 0 },
-	{ "hdc1008", 0 },
-	{ "hdc1010", 0 },
-	{ "hdc1050", 0 },
-	{ "hdc1080", 0 },
+	{ "hdc100X", (kernel_ulong_t)&hdc100x_chip_data },
+	{ "hdc1000", (kernel_ulong_t)&hdc100x_chip_data },
+	{ "hdc1008", (kernel_ulong_t)&hdc1008_chip_data },
+	{ "hdc1010", (kernel_ulong_t)&hdc100x_chip_data },
+	{ "hdc1050", (kernel_ulong_t)&hdc100x_chip_data },
+	{ "hdc1080", (kernel_ulong_t)&hdc100x_chip_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, hdc100x_id);
 
 static const struct of_device_id hdc100x_dt_ids[] = {
-	{ .compatible = "ti,hdc1000" },
-	{ .compatible = "ti,hdc1008" },
-	{ .compatible = "ti,hdc1010" },
-	{ .compatible = "ti,hdc1050" },
-	{ .compatible = "ti,hdc1080" },
+	{ .compatible = "ti,hdc1000", .data = &hdc100x_chip_data },
+	{ .compatible = "ti,hdc1008", .data = &hdc1008_chip_data },
+	{ .compatible = "ti,hdc1010", .data = &hdc100x_chip_data },
+	{ .compatible = "ti,hdc1050", .data = &hdc100x_chip_data },
+	{ .compatible = "ti,hdc1080", .data = &hdc100x_chip_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, hdc100x_dt_ids);
Signature · 1 line
2.31.1

A message that is not in the archive (sent off-list or not yet received): CAHp75VfEfirG+aALEhoSLgcLrFTJq7AQc=_BJg7p7QUykpZHhA@mail.gmail.com

author
#4 lore raw

Andy Shevchenko 於 7/28/2022 7:58 PM 寫道:

Quoted 44 lines · Potin Lai
Quoted 43 lines

Add manufacturer and device ID checking during probe, and skip the checking if chip model not supported.

Supported:
- HDC1000
- HDC1010
- HDC1050
- HDC1080

Not supported:
- HDC1008

---
 drivers/iio/humidity/hdc100x.c | 69 ++++++++++++++++++++++++++++------
 1 file changed, 58 insertions(+), 11 deletions(-)
drivers/iio/humidity/ renamed from drivers/iio/humidity/hdc100x.c +0 -0

hdc100x.c
index 0d514818635cb..be1244577921d 100644

drivers/iio/humidity/hdc100x.c +16 -0
@@ -34,7 +34,25 @@
 #define HDC100X_REG_CONFIG_ACQ_MODE            BIT(12)
 #define HDC100X_REG_CONFIG_HEATER_EN           BIT(13)
 
+#define HDC100X_REG_MFR_ID     0xFE
+#define HDC100X_REG_DEV_ID     0xFF
+
+#define HDC100X_MFR_ID 0x5449
+
+struct hdc100x_chip_data {
+       bool support_mfr_check;
+};
+
+static const struct hdc100x_chip_data hdc100x_chip_data = {
+       .support_mfr_check      = true,
+};
+
+static const struct hdc100x_chip_data hdc1008_chip_data = {
+       .support_mfr_check      = false,
+};
Quoted 9 lines

drivers/iio/humidity/hdc100x.c line 55

Quoted 3 lines
drivers/iio/humidity/hdc100x.c +2 -0
+
 struct hdc100x_data {
+       const struct hdc100x_chip_data *chip_data;

I don’t know why you added it here without any use right now, but even with that adding as a first member makes code suboptimal due to an additional pointer arithmetic. Use bloat-o-meter to see the difference.

Sorry, I think I misunderstood your comment in your previous reply.
(Introducing a temporary variable for struct device pointer might also help in future to refactor to make code neater.)

Thank you for introduce me the bloat-o-meter tool, I will have a check with it. But I think I will just remove the pointer for now.

Thanks,
Potin

Quoted 95 lines
Quoted 95 lines
drivers/iio/humidity/hdc100x.c +40 -12
        struct i2c_client *client;
        struct mutex lock;
        u16 config;
@@ -351,8 +369,32 @@ static const struct iio_info hdc100x_info = {
        .attrs = &hdc100x_attribute_group,
 };
 
+static int hdc100x_read_mfr_id(struct i2c_client *client)
+{
+       return i2c_smbus_read_word_swapped(client, HDC100X_REG_MFR_ID);
+}
+
+static int hdc100x_read_dev_id(struct i2c_client *client)
+{
+       return i2c_smbus_read_word_swapped(client, HDC100X_REG_DEV_ID);
+}
+
+static bool is_valid_hdc100x(struct i2c_client *client)
+{
+       int mfr_id, dev_id;
+
+       mfr_id = hdc100x_read_mfr_id(client);
+       dev_id = hdc100x_read_dev_id(client);
+       if (mfr_id == HDC100X_MFR_ID &&
+          (dev_id == 0x1000 || dev_id == 0x1050))
+               return true;
+
+       return false;
+}
+
 static int hdc100x_probe(struct i2c_client *client)
 {
+       const struct hdc100x_chip_data *chip_data;
        struct iio_dev *indio_dev;
        struct hdc100x_data *data;
        int ret;
@@ -361,6 +403,10 @@ static int hdc100x_probe(struct i2c_client *client)
                                     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
                return -EOPNOTSUPP;
 
+       chip_data = device_get_match_data(&client->dev);
+       if (chip_data->support_mfr_check && !is_valid_hdc100x(client))
+               return -EINVAL;
+
        indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
        if (!indio_dev)
                return -ENOMEM;
@@ -368,6 +414,7 @@ static int hdc100x_probe(struct i2c_client *client)
        data = iio_priv(indio_dev);
        i2c_set_clientdata(client, indio_dev);
        data->client = client;
+       data->chip_data = chip_data;
        mutex_init(&data->lock);
 
        indio_dev->name = dev_name(&client->dev);
@@ -396,22 +443,22 @@ static int hdc100x_probe(struct i2c_client *client)
 }
 
 static const struct i2c_device_id hdc100x_id[] = {
-       { "hdc100x", 0 },
-       { "hdc1000", 0 },
-       { "hdc1008", 0 },
-       { "hdc1010", 0 },
-       { "hdc1050", 0 },
-       { "hdc1080", 0 },
+       { "hdc100X", (kernel_ulong_t)&hdc100x_chip_data },
+       { "hdc1000", (kernel_ulong_t)&hdc100x_chip_data },
+       { "hdc1008", (kernel_ulong_t)&hdc1008_chip_data },
+       { "hdc1010", (kernel_ulong_t)&hdc100x_chip_data },
+       { "hdc1050", (kernel_ulong_t)&hdc100x_chip_data },
+       { "hdc1080", (kernel_ulong_t)&hdc100x_chip_data },
        { }
 };
 MODULE_DEVICE_TABLE(i2c, hdc100x_id);
 
 static const struct of_device_id hdc100x_dt_ids[] = {
-       { .compatible = "ti,hdc1000" },
-       { .compatible = "ti,hdc1008" },
-       { .compatible = "ti,hdc1010" },
-       { .compatible = "ti,hdc1050" },
-       { .compatible = "ti,hdc1080" },
+       { .compatible = "ti,hdc1000", .data = &hdc100x_chip_data },
+       { .compatible = "ti,hdc1008", .data = &hdc1008_chip_data },
+       { .compatible = "ti,hdc1010", .data = &hdc100x_chip_data },
+       { .compatible = "ti,hdc1050", .data = &hdc100x_chip_data },
+       { .compatible = "ti,hdc1080", .data = &hdc100x_chip_data },
        { }
 };
 MODULE_DEVICE_TABLE(of, hdc100x_dt_ids);
--

2.31.1

#5 lore raw
Quoted 2 lines · Potin Lai

Andy Shevchenko 於 7/28/2022 7:58 PM 寫道:

Quoted 1 line · Potin Lai

Please, remove the unneeded context when replying!

...

Quoted 2 lines

Sorry, I think I misunderstood your comment in your previous reply.
(Introducing a temporary variable for struct device pointer might also help in future to refactor to make code neater.)

It was about

  struct device *dev = &client->dev;

but as I said it may be done in a separate patch.

Signature · 2 lines
With Best Regards,
Andy Shevchenko