bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards
Subsystems (3)
PATCH v4 1/1 bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards
Introduce BSH SystemMaster (SMM) M2 board family, which consists of:
imx6ulz SMM M2 and imx6ulz SMM M2 PRO boards.
Add support for imx6ulz BSH SMM M2 board:
- 128 MiB DDR3 RAM
- 256MiB Nand
- USBOTG1 peripheral - fastboot.
---
Changes V3->V4:
- really drop the define in include
Changes V2->V3:
- remove CONFIG_SYS_HZ default is 1000 from include
- make const uart4
Changes V1->V2:
- Adjust board due to the migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h
- Drop reference to freescale board in imx6ulz_smm_m2 include file
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/imx6ulz-bsh-smm-m2-u-boot.dtsi | 35 +++++ arch/arm/dts/imx6ulz-bsh-smm-m2.dts | 146 ++++++++++++++++++++ arch/arm/mach-imx/mx6/Kconfig | 12 ++ board/bsh/imx6ulz_smm_m2/Kconfig | 12 ++ board/bsh/imx6ulz_smm_m2/MAINTAINERS | 6 + board/bsh/imx6ulz_smm_m2/Makefile | 6 + board/bsh/imx6ulz_smm_m2/imx6ulz_smm_m2.c | 53 +++++++ board/bsh/imx6ulz_smm_m2/spl.c | 130 +++++++++++++++++ configs/imx6ulz_smm_m2_defconfig | 75 ++++++++++ include/configs/imx6ulz_smm_m2.h | 79 +++++++++++ 11 files changed, 555 insertions(+) create mode 100644 arch/arm/dts/imx6ulz-bsh-smm-m2-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ulz-bsh-smm-m2.dts create mode 100644 board/bsh/imx6ulz_smm_m2/Kconfig create mode 100644 board/bsh/imx6ulz_smm_m2/MAINTAINERS create mode 100644 board/bsh/imx6ulz_smm_m2/Makefile create mode 100644 board/bsh/imx6ulz_smm_m2/imx6ulz_smm_m2.c create mode 100644 board/bsh/imx6ulz_smm_m2/spl.c create mode 100644 configs/imx6ulz_smm_m2_defconfig create mode 100644 include/configs/imx6ulz_smm_m2.h
arch/arm/dts/Makefile +1 -0
@@ -891,6 +891,7 @@ dtb-$(CONFIG_MX6ULL) += \ imx6ull-phytec-segin-ff-rdk-emmc.dtb \ imx6ull-dart-6ul.dtb \ imx6ull-somlabs-visionsom.dtb \ + imx6ulz-bsh-smm-m2.dtb \ imx6ulz-14x14-evk.dtb dtb-$(CONFIG_ARCH_MX6) += \
arch/arm/dts/imx6ulz-bsh-smm-m2-u-boot.dtsi new file +35 -0
@@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 BSH Hausgeraete GmbH + * + * Author: Michael Trimarchi <[email protected]> + */ + +&{/soc} { + u-boot,dm-pre-reloc; +}; + +&aips2 { + u-boot,dm-pre-reloc; +}; + +&iomuxc { + u-boot,dm-pre-reloc; +}; + +&iomuxc_snvs { + u-boot,dm-pre-reloc; +}; + +&uart4 { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart4 { + u-boot,dm-pre-reloc; +}; + +&gpmi { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +};
arch/arm/dts/imx6ulz-bsh-smm-m2.dts new file +146 -0
146 lines not on this page · raw message
arch/arm/mach-imx/mx6/Kconfig +12 -0
@@ -466,6 +466,17 @@ config TARGET_MX6ULL_14X14_EVK select DM_THERMAL imply CMD_DM +config TARGET_MX6ULZ_SMM_M2 + bool "Support imx6ulz_smm_m2" + depends on MX6ULL + select DM + select DM_GPIO + select DM_I2C + select DM_SERIAL + select DM_MTD + select DM_THERMAL + select SUPPORT_SPL + config TARGET_MYS_6ULX bool "MYiR MYS-6ULX" depends on MX6ULL
@@ -685,6 +696,7 @@ source "board/ge/b1x5v2/Kconfig" source "board/aristainetos/Kconfig" source "board/armadeus/opos6uldev/Kconfig" source "board/boundary/nitrogen6x/Kconfig" +source "board/bsh/imx6ulz_smm_m2/Kconfig" source "board/bticino/mamoj/Kconfig" source "board/compulab/cm_fx6/Kconfig" source "board/dhelectronics/dh_imx6/Kconfig"
board/bsh/imx6ulz_smm_m2/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +if TARGET_MX6ULZ_SMM_M2 + +config SYS_BOARD + default "imx6ulz_smm_m2" + +config SYS_VENDOR + default "bsh" + +config SYS_CONFIG_NAME + default "imx6ulz_smm_m2" + +endif
board/bsh/imx6ulz_smm_m2/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MX6ULZ_SMM_M2 BOARD +M: Michael Trimarchi <[email protected]> +S: Maintained +F: board/bsh/mx6ulz_smm_m2/ +F: include/configs/imx6ulz_smm_m2.h +F: configs/imx6ulz_smm_m2_defconfig
board/bsh/imx6ulz_smm_m2/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# (C) Copyright 2021 Amarula Solutions B.V. + +obj-y := imx6ulz_smm_m2.o +obj-$(CONFIG_SPL_BUILD) += spl.o +
board/bsh/imx6ulz_smm_m2/imx6ulz_smm_m2.c new file +53 -0
53 lines not on this page · raw message
board/bsh/imx6ulz_smm_m2/spl.c new file +130 -0
130 lines not on this page · raw message
configs/imx6ulz_smm_m2_defconfig new file +75 -0
75 lines not on this page · raw message
include/configs/imx6ulz_smm_m2.h new file +79 -0
79 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH v4 1/1 bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards
Quoted 7 lines
Introduce BSH SystemMaster (SMM) M2 board family, which consists of:
imx6ulz SMM M2 and imx6ulz SMM M2 PRO boards.
Add support for imx6ulz BSH SMM M2 board:
- 128 MiB DDR3 RAM
- 256MiB Nand
- USBOTG1 peripheral - fastboot.Signed-off-by Michael Trimarchi <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Stefano
I have more patches on m2 and I need to know if you are going to request the merge to Tom soon or later. Alternative you can drop this one and keep the new one
Michael
Quoted 19 lines · On Fri, Jul 29, 2022 at 12:10 PM <[email protected]> wrote:
Quoted 8 lines
Introduce BSH SystemMaster (SMM) M2 board family, which consists of:
imx6ulz SMM M2 and imx6ulz SMM M2 PRO boards.
Add support for imx6ulz BSH SMM M2 board:
- 128 MiB DDR3 RAM
- 256MiB Nand
- USBOTG1 peripheral - fastboot.Signed-off-by Michael Trimarchi <[email protected]>Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
Signature · 11 lines
Michael Nazzareno Trimarchi Co-Founder & Chief Executive Officer M. +39 347 913 2170 [email protected] __________________________________ Amarula Solutions BV Joop Geesinkweg 125, 1114 AB, Amsterdam, NL T. +31 (0)85 111 9172 [email protected] www.amarulasolutions.com
Hi Michael,
Quoted 5 lines · Michael Nazzareno Trimarchi
Hi Stefano
I have more patches on m2 and I need to know if you are going to request the merge to Tom soon or later. Alternative you can drop this one and keep the new one
I am checking which patches should flow into the release, the other ones will go to -next. It seems to me better to drop your V1, and I will apply V2 then.
Regards,
Stefano
Quoted 26 lines
Michael
Quoted 19 lines · On Fri, Jul 29, 2022 at 12:10 PM <[email protected]> wrote:
Quoted 8 lines
Introduce BSH SystemMaster (SMM) M2 board family, which consists of:
imx6ulz SMM M2 and imx6ulz SMM M2 PRO boards.
Add support for imx6ulz BSH SMM M2 board:
- 128 MiB DDR3 RAM
- 256MiB Nand
- USBOTG1 peripheral - fastboot.Signed-off-by Michael Trimarchi <[email protected]>Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================