migration-test: Allow test to run without uffd
v3 cover migration-test: Allow test to run without uffd
v2:
- Fix warning in patch 1 [Thomas]
- Collected R-b for Daniel
Compare to v1, this added a new patch as reported by Thomas to (hopefully) allow auto-converge test to pass on some MacOS testbeds.
Please review, thanks.
Peter Xu (2):
migration-test: Use migrate_ensure_converge() for auto-converge
migration-test: Allow test to run without uffd
tests/qtest/migration-test.c | 67 +++++++++++++++--------------------- 1 file changed, 27 insertions(+), 40 deletions(-)
Signature · 1 line
2.32.0
PATCH v3 1/2 migration-test: Use migrate_ensure_converge() for auto-converge
Thomas reported that auto-converge test will timeout on MacOS CI gatings. Use the migrate_ensure_converge() helper too in the auto-converge as when Daniel reworked the other test cases.
Since both max_bandwidth / downtime_limit will not be used for converge calculations, make it simple by removing the remaining check, then we can completely remove both variables altogether, since migrate_ensure_converge is used the remaining check won't make much sense anyway.
--- tests/qtest/migration-test.c | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-)
tests/qtest/migration-test.c +2 -17
@@ -1768,7 +1768,7 @@ static void test_migrate_auto_converge(void) g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);MigrateStart args = {};QTestState *from, *to; -int64_t remaining, percentage; +int64_t percentage;/* * We want the test to be stable and as fast as possible.
@@ -1776,14 +1776,6 @@ static void test_migrate_auto_converge(void)* so we need to decrease a bandwidth. */ const int64_t init_pct =5 , inc_pct =50 , max_pct =95 ; -const int64_t max_bandwidth =400000000 ;/* ~400Mb/s */ -const int64_t downtime_limit =250 ;/* 250ms */ -/* -* We migrate through unix-socket (> 500Mb/s). -* Thus, expected migration speed ~= bandwidth limit (< 500Mb/s). -* So, we can predict expected_threshold -*/ -const int64_t expected_threshold = max_bandwidth * downtime_limit /1000 ;if (test_migrate_start (&from, &to, uri, &args)) {return ;
@@ -1818,8 +1810,7 @@ static void test_migrate_auto_converge(void)/* The first percentage of throttling should be equal to init_pct */ g_assert_cmpint(percentage, ==, init_pct);/* Now, when we tested that throttling works, let it converge */ -migrate_set_parameter_int (from,"downtime-limit" , downtime_limit); -migrate_set_parameter_int (from,"max-bandwidth" , max_bandwidth); +migrate_ensure_converge (from);/* * Wait for pre-switchover status to check last throttle percentage
@@ -1830,11 +1821,6 @@ static void test_migrate_auto_converge(void)/* The final percentage of throttling shouldn't be greater than max_pct */ percentage =read_migrate_property_int (from,"cpu-throttle-percentage" ); g_assert_cmpint(percentage, <=, max_pct); - - remaining =read_ram_property_int (from,"remaining" ); - g_assert_cmpint(remaining, <, - (expected_threshold + expected_threshold /100 )); -migrate_continue (from,"pre-switchover" );qtest_qmp_eventwait (to,"RESUME" );
@@ -1842,7 +1828,6 @@ static void test_migrate_auto_converge(void)wait_for_serial ("dest_serial" );wait_for_migration_complete (from); -test_migrate_end (from, to, true); }
Signature · 1 line
2.32.0
PATCH v3 2/2 migration-test: Allow test to run without uffd
In reply to Peter XuWe used to stop running all tests if uffd is not detected. However logically that's only needed for postcopy not the rest of tests.
Keep running the rest when still possible.
--- tests/qtest/migration-test.c | 48 +++++++++++++++++++----------------- 1 file changed, 25 insertions(+), 23 deletions(-)
tests/qtest/migration-test.c +25 -23
@@ -2424,14 +2424,11 @@ int main(int argc, char **argv) {char template[] ="/tmp/migration-test-XXXXXX" ;const bool has_kvm =qtest_has_accel ("kvm" ); +const bool has_uffd =ufd_version_check ();int ret;g_test_init (&argc, &argv,NULL ); -if (!ufd_version_check ()) { -return g_test_run (); - } -/* * On ppc64, the test only works with kvm-hv, but not with kvm-pr and TCG * is touchy due to race conditions on dirty bits (especially on PPC for
@@ -2460,13 +2457,15 @@ int main(int argc, char **argv)module_call_init (MODULE_INIT_QOM ); -qtest_add_func ("/migration/postcopy/unix" , test_postcopy); -qtest_add_func ("/migration/postcopy/plain" , test_postcopy); -qtest_add_func ("/migration/postcopy/recovery/plain" , - test_postcopy_recovery); -qtest_add_func ("/migration/postcopy/preempt/plain" , test_postcopy_preempt); -qtest_add_func ("/migration/postcopy/preempt/recovery/plain" , - test_postcopy_preempt_recovery); +if (has_uffd) { +qtest_add_func ("/migration/postcopy/unix" , test_postcopy); +qtest_add_func ("/migration/postcopy/plain" , test_postcopy); +qtest_add_func ("/migration/postcopy/recovery/plain" , + test_postcopy_recovery); +qtest_add_func ("/migration/postcopy/preempt/plain" , test_postcopy_preempt); +qtest_add_func ("/migration/postcopy/preempt/recovery/plain" , + test_postcopy_preempt_recovery); + }qtest_add_func ("/migration/bad_dest" , test_baddest);qtest_add_func ("/migration/precopy/unix/plain" , test_precopy_unix_plain);
@@ -2474,18 +2473,21 @@ int main(int argc, char **argv)#ifdef CONFIG_GNUTLS qtest_add_func ("/migration/precopy/unix/tls/psk" , test_precopy_unix_tls_psk); -/* -* NOTE: psk test is enough for postcopy, as other types of TLS -* channels are tested under precopy. Here what we want to test is the -* general postcopy path that has TLS channel enabled. -*/ -qtest_add_func ("/migration/postcopy/tls/psk" , test_postcopy_tls_psk); -qtest_add_func ("/migration/postcopy/recovery/tls/psk" , - test_postcopy_recovery_tls_psk); -qtest_add_func ("/migration/postcopy/preempt/tls/psk" , - test_postcopy_preempt_tls_psk); -qtest_add_func ("/migration/postcopy/preempt/recovery/tls/psk" , - test_postcopy_preempt_all); + +if (has_uffd) { +/* +* NOTE: psk test is enough for postcopy, as other types of TLS +* channels are tested under precopy. Here what we want to test is the +* general postcopy path that has TLS channel enabled. +*/ +qtest_add_func ("/migration/postcopy/tls/psk" , test_postcopy_tls_psk); +qtest_add_func ("/migration/postcopy/recovery/tls/psk" , + test_postcopy_recovery_tls_psk); +qtest_add_func ("/migration/postcopy/preempt/tls/psk" , + test_postcopy_preempt_tls_psk); +qtest_add_func ("/migration/postcopy/preempt/recovery/tls/psk" , + test_postcopy_preempt_all); + }#ifdef CONFIG_TASN1 qtest_add_func ("/migration/precopy/unix/tls/x509/default-host" , test_precopy_unix_tls_x509_default_host);
Signature · 1 line
2.32.0
Quoted 7 lines · Peter Xu
v2:
- Fix warning in patch 1 [Thomas]
- Collected R-b for DanielCompare to v1, this added a new patch as reported by Thomas to (hopefully) allow auto-converge test to pass on some MacOS testbeds.
Quoted 8 lines
Please review, thanks.
Peter Xu (2):
migration-test: Usemigrate_ensure_converge()for auto-converge
migration-test: Allow test to run without uffdtests/qtest/migration-test.c | 67 +++++++++++++++--------------------- 1 file changed, 27 insertions(+), 40 deletions(-)
Seems to work now:
https://api.cirrus-ci.com/v1/task/4760264934424576/logs/build.log
Citing:
" 2/59 qemu:qtest+qtest-x86_64 / qtest-x86_64/migration-test OK
218.87s 33 subtests passed"
Quoted 19 lines · Thomas Huth
Quoted 7 lines · Peter Xu
v2:
- Fix warning in patch 1 [Thomas]
- Collected R-b for DanielCompare to v1, this added a new patch as reported by Thomas to (hopefully) allow auto-converge test to pass on some MacOS testbeds.
Quoted 8 lines
Please review, thanks.
Peter Xu (2):
migration-test: Usemigrate_ensure_converge()for auto-converge
migration-test: Allow test to run without uffdtests/qtest/migration-test.c | 67 +++++++++++++++--------------------- 1 file changed, 27 insertions(+), 40 deletions(-)Seems to work now:
Quoted 8 lines
https://api.cirrus-ci.com/v1/task/4760264934424576/logs/build.log
Citing:
" 2/59 qemu:qtest+qtest-x86_64 / qtest-x86_64/migration-test OK
218.87s 33 subtests passed"Tested-by Thomas Huth <[email protected]>
Thanks!
Signature · 1 line
Peter Xu
Quoted 7 lines · Peter Xu
v2:
- Fix warning in patch 1 [Thomas]
- Collected R-b for DanielCompare to v1, this added a new patch as reported by Thomas to (hopefully) allow auto-converge test to pass on some MacOS testbeds.
Quoted 8 lines
Please review, thanks.
Peter Xu (2):
migration-test: Usemigrate_ensure_converge()for auto-converge
migration-test: Allow test to run without uffdtests/qtest/migration-test.c | 67 +++++++++++++++--------------------- 1 file changed, 27 insertions(+), 40 deletions(-)
Thanks, I've queued this to my testing-next branch now:
https://gitlab.com/thuth/qemu/-/commits/testing-next/
Thomas