Skip to contentSkip to conversation

usb: typec: tcpci_rt1711h: Add compatible with rt1715

PATCH Superseded Gene Chen 3 participants 17 messages Aug 1, 2022 – Aug 3, 2022

Subsystems (4)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Gene Chen

author
#0 lore raw

v3 cover usb: typec: tcpci_rt1711h: Add compatible with rt1715

This patch series add binding document for rt1711h and compatible driver with rt1715. Also add different remote rp workaround and initial phy setting.

Gene Chen (7)
- dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H
- usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn
- usb: typec: tcpci_rt1711h: Add regulator support when source vbus
- usb: typec: tcpci_rt1711h: Add initial phy setting
- usb: typec: tcpci_rt1711h: Add compatible id with rt1715
- usb: typec: tcpci: Move function "tcpci_to_typec_cc" to common
- usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage level

 Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml |  100 ++++++++
 drivers/usb/typec/tcpm/tcpci.c                             |   22 -
 drivers/usb/typec/tcpm/tcpci.h                             |   23 +
 drivers/usb/typec/tcpm/tcpci_rt1711h.c                     |  159 +++++++++++--
 4 files changed, 265 insertions(+), 39 deletions(-)

changelogs between v2 & v3
- binding compatible name with did to validate chip
- remove postfix name "_mask"
- move get cc status macro to header

changelogs between v1 & v2
- Seperate patch by specific purpose
- Fix binding document error
- Set cc change woakaround without using tcpci ops callback

author
#1 lore raw

PATCH v3 1/7 dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H

From: Gene Chen <[email protected]>

Add binding for Richtek RT1711H

---
 .../bindings/usb/richtek,rt1711h.yaml         | 100 ++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml new file +100 -0
new file mode 100644
index 000000000000..1999f614c89b
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Richtek RT1711H Type-C Port Switch and Power Delivery controller
+
+maintainers:
+  - Gene Chen <[email protected]>
+
+description: |
+  The RT1711H is a USB Type-C controller that complies with the latest
+  USB Type-C and PD standards. It does the USB Type-C detection including attach
+  and orientation. It integrates the physical layer of the USB BMC power
+  delivery protocol to allow up to 100W of power. The BMC PD block enables full
+  support for alternative interfaces of the Type-C specification.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt1711h
+      - richtek,rt1715
+    description:
+      RT1711H support PD20, RT1715 support PD30 except Fast Role Swap.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - connector
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt1711h@4e {
+        compatible = "richtek,rt1711h";
+        reg = <0x4e>;
+        interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+        wakeup-source;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+          data-role = "dual";
+          power-role = "dual";
+          try-power-role = "sink";
+          source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+          sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+          op-sink-microwatt = <10000000>;
+
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+              reg = <0>;
+              endpoint {
+                remote-endpoint = <&usb_hs>;
+              };
+            };
+            port@1 {
+              reg = <1>;
+              endpoint {
+                remote-endpoint = <&usb_ss>;
+              };
+            };
+            port@2 {
+              reg = <2>;
+              endpoint {
+                remote-endpoint = <&dp_aux>;
+              };
+            };
+          };
+        };
+      };
+    };
+...
Signature · 1 line
2.25.1
author
#2 lore raw

PATCH v3 2/7 usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn

In reply to Gene Chen

From: Gene Chen <[email protected]>

replace overwrite whole register with update bits

---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +9 -6
index b56a0880a044..6197d9a05d36 100644
@@ -5,13 +5,15 @@
  * Richtek RT1711H Type-C Chip Driver
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/bits.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
-#include <linux/gpio/consumer.h>
-#include <linux/usb/tcpm.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/regmap.h>
+#include <linux/usb/tcpm.h>
+
 #include "tcpci.h"
 
 #define RT1711H_VID		0x29CF
@@ -23,6 +25,7 @@
 #define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \
 			    (((ck300) << 7) | ((ship_off) << 5) | \
 			    ((auto_idle) << 3) | ((tout) & 0x07))
+#define RT1711H_AUTOIDLEEN	BIT(3)
 
 #define RT1711H_RTCTRL11	0x9E
 
@@ -109,8 +112,8 @@ static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
 {
 	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
 
-	return rt1711h_write8(chip, RT1711H_RTCTRL8,
-			      RT1711H_RTCTRL8_SET(0, 1, !enable, 2));
+	return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL8,
+				  RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN);
 }
 
 static int rt1711h_start_drp_toggling(struct tcpci *tcpci,
Signature · 1 line
2.25.1
maintainer
#3 lore raw

Re: [PATCH v3 2/7] usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn

Hi Gene,

Quoted 19 lines · Gene Chen

From: Gene Chen <[email protected]>

replace overwrite whole register with update bits

---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +0 -2
index b56a0880a044..6197d9a05d36 100644
@@ -5,13 +5,15 @@
  * Richtek RT1711H Type-C Chip Driver
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>

drivers/usb/typec/tcpm/tcpci_rt1711h.c line 15

Quoted 10 lines
drivers/usb/typec/tcpm/tcpci_rt1711h.c +5 -2
+#include <linux/bits.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
-#include <linux/gpio/consumer.h>
-#include <linux/usb/tcpm.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/regmap.h>
+#include <linux/usb/tcpm.h>

That header reshuffling is not necessary for this change - at least you are not giving any reason for it in your commit message.

If there is no real need for that in this patch, then please leave the headers as they are. You can propose changing the order of the headers in a separate patch. Though, I would not bother with it unless there is some real benefit in doing so, and I'm pretty sure there isn't any.

Quoted 24 lines
drivers/usb/typec/tcpm/tcpci_rt1711h.c +3 -2
 #include "tcpci.h"
 
 #define RT1711H_VID		0x29CF
@@ -23,6 +25,7 @@
 #define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \
 			    (((ck300) << 7) | ((ship_off) << 5) | \
 			    ((auto_idle) << 3) | ((tout) & 0x07))
+#define RT1711H_AUTOIDLEEN	BIT(3)
 
 #define RT1711H_RTCTRL11	0x9E
 
@@ -109,8 +112,8 @@ static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
 {
 	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
 
-	return rt1711h_write8(chip, RT1711H_RTCTRL8,
-			      RT1711H_RTCTRL8_SET(0, 1, !enable, 2));
+	return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL8,
+				  RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN);
 }
 
 static int rt1711h_start_drp_toggling(struct tcpci *tcpci,
Signature · 1 line
2.25.1

thanks,

Signature · 1 line
heikki
author
#4 lore raw

Re: [PATCH v3 2/7] usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn

Heikki Krogerus <[email protected]> 於 2022年8月2日 週二 下午3:57寫道:

Quoted 37 lines

Hi Gene,

Quoted 19 lines · Gene Chen

From: Gene Chen <[email protected]>

replace overwrite whole register with update bits

---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +0 -2
index b56a0880a044..6197d9a05d36 100644
@@ -5,13 +5,15 @@
  * Richtek RT1711H Type-C Chip Driver
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>

drivers/usb/typec/tcpm/tcpci_rt1711h.c line 15

Quoted 10 lines
drivers/usb/typec/tcpm/tcpci_rt1711h.c +5 -2
+#include <linux/bits.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
-#include <linux/gpio/consumer.h>
-#include <linux/usb/tcpm.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/regmap.h>
+#include <linux/usb/tcpm.h>

That header reshuffling is not necessary for this change - at least you are not giving any reason for it in your commit message.

Quoted 5 lines

If there is no real need for that in this patch, then please leave the headers as they are. You can propose changing the order of the headers in a separate patch. Though, I would not bother with it unless there is some real benefit in doing so, and I'm pretty sure there isn't any.

ACK, I will remove reshuffling.
It was suggested coding style by other reviewer in other driver.

Quoted 29 lines
Quoted 23 lines
drivers/usb/typec/tcpm/tcpci_rt1711h.c +3 -3
 #include "tcpci.h"
 
 #define RT1711H_VID          0x29CF
@@ -23,6 +25,7 @@
 #define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \
                          (((ck300) << 7) | ((ship_off) << 5) | \
                          ((auto_idle) << 3) | ((tout) & 0x07))
+#define RT1711H_AUTOIDLEEN   BIT(3)
 
 #define RT1711H_RTCTRL11     0x9E
 
@@ -109,8 +112,8 @@ static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
 {
      struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
 
-     return rt1711h_write8(chip, RT1711H_RTCTRL8,
-                           RT1711H_RTCTRL8_SET(0, 1, !enable, 2));
+     return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL8,
+                               RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN);
 }
 
 static int rt1711h_start_drp_toggling(struct tcpci *tcpci,
--
Quoted 1 line

2.25.1

thanks,

--
heikki

author
#5 lore raw

PATCH v3 3/7 usb: typec: tcpci_rt1711h: Add regulator support when source vbus

In reply to Gene Chen

From: Gene Chen <[email protected]>

Add regulator support when source vbus

---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 28 ++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +28 -0
index 6197d9a05d36..df7bfe299987 100644
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/usb/tcpm.h>
 
 #include "tcpci.h"
@@ -42,6 +43,8 @@ struct rt1711h_chip {
 	struct tcpci_data data;
 	struct tcpci *tcpci;
 	struct device *dev;
+	struct regulator *vbus;
+	bool src_en;
 };
 
 static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
@@ -105,6 +108,26 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 
 	/* dcSRC.DRP : 33% */
 	return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+
+}
+
+static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
+			    bool src, bool snk)
+{
+	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+	int ret;
+
+	if (chip->src_en == src)
+		return 0;
+
+	if (src)
+		ret = regulator_enable(chip->vbus);
+	else
+		ret = regulator_disable(chip->vbus);
+
+	if (!ret)
+		chip->src_en = src;
+	return ret;
 }
 
 static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
@@ -248,7 +271,12 @@ static int rt1711h_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
+	chip->vbus = devm_regulator_get(&client->dev, "vbus");
+	if (IS_ERR(chip->vbus))
+		return PTR_ERR(chip->vbus);
+
 	chip->data.init = rt1711h_init;
+	chip->data.set_vbus = rt1711h_set_vbus;
 	chip->data.set_vconn = rt1711h_set_vconn;
 	chip->data.start_drp_toggling = rt1711h_start_drp_toggling;
 	chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
Signature · 1 line
2.25.1
maintainer Acked-by on v3 3/7
#6 lore raw

Re: [PATCH v3 3/7] usb: typec: tcpci_rt1711h: Add regulator support when source vbus

Quoted 5 lines · Gene Chen

From: Gene Chen <[email protected]>

Add regulator support when source vbus

Quoted 67 lines
---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 28 ++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +28 -0
index 6197d9a05d36..df7bfe299987 100644
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/usb/tcpm.h>
 
 #include "tcpci.h"
@@ -42,6 +43,8 @@ struct rt1711h_chip {
 	struct tcpci_data data;
 	struct tcpci *tcpci;
 	struct device *dev;
+	struct regulator *vbus;
+	bool src_en;
 };
 
 static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
@@ -105,6 +108,26 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 
 	/* dcSRC.DRP : 33% */
 	return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+
+}
+
+static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
+			    bool src, bool snk)
+{
+	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+	int ret;
+
+	if (chip->src_en == src)
+		return 0;
+
+	if (src)
+		ret = regulator_enable(chip->vbus);
+	else
+		ret = regulator_disable(chip->vbus);
+
+	if (!ret)
+		chip->src_en = src;
+	return ret;
 }
 
 static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
@@ -248,7 +271,12 @@ static int rt1711h_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
+	chip->vbus = devm_regulator_get(&client->dev, "vbus");
+	if (IS_ERR(chip->vbus))
+		return PTR_ERR(chip->vbus);
+
 	chip->data.init = rt1711h_init;
+	chip->data.set_vbus = rt1711h_set_vbus;
 	chip->data.set_vconn = rt1711h_set_vconn;
 	chip->data.start_drp_toggling = rt1711h_start_drp_toggling;
 	chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
Signature · 1 line
2.25.1
Signature · 1 line
heikki
author
#7 lore raw

PATCH v3 4/7 usb: typec: tcpci_rt1711h: Add initial phy setting

In reply to Gene Chen

From: Gene Chen <[email protected]>

Add initial phy setting about phy dicard retry, rx filter deglitech time and BMC-encoded wait time

---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +14 -1
index df7bfe299987..33d8ea95b7c1 100644
@@ -20,6 +20,9 @@
 #define RT1711H_VID		0x29CF
 #define RT1711H_PID		0x1711
 
+#define RT1711H_PHYCTRL1	0x80
+#define RT1711H_PHYCTRL2	0x81
+
 #define RT1711H_RTCTRL8		0x9B
 
 /* Autoidle timeout = (tout * 2 + 1) * 6.4ms */
@@ -107,8 +110,18 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 		return ret;
 
 	/* dcSRC.DRP : 33% */
-	return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+	ret = rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+	if (ret < 0)
+		return ret;
+
+	/* Enable phy discard retry, retry count 7, rx filter deglitech 100 us */
+	ret = rt1711h_write8(chip, RT1711H_PHYCTRL1, 0xF1);
+	if (ret < 0)
+		return ret;
 
+	/* Decrease wait time of BMC-encoded 1 bit from 2.67us to 2.55us */
+	/* wait time : (val * .4167) us */
+	return rt1711h_write8(chip, RT1711H_PHYCTRL2, 62);
 }
 
 static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
Signature · 1 line
2.25.1
maintainer
#8 lore raw

Re: [PATCH v3 4/7] usb: typec: tcpci_rt1711h: Add initial phy setting

Hi Gene,

Quoted 4 lines · Gene Chen

From: Gene Chen <[email protected]>

Add initial phy setting about phy dicard retry, rx filter deglitech time and BMC-encoded wait time

I'm sorry, but what does "deglitech" mean? Is it just a typo?

Quoted 42 lines
---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +14 -1
index df7bfe299987..33d8ea95b7c1 100644
@@ -20,6 +20,9 @@
 #define RT1711H_VID		0x29CF
 #define RT1711H_PID		0x1711
 
+#define RT1711H_PHYCTRL1	0x80
+#define RT1711H_PHYCTRL2	0x81
+
 #define RT1711H_RTCTRL8		0x9B
 
 /* Autoidle timeout = (tout * 2 + 1) * 6.4ms */
@@ -107,8 +110,18 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 		return ret;
 
 	/* dcSRC.DRP : 33% */
-	return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+	ret = rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+	if (ret < 0)
+		return ret;
+
+	/* Enable phy discard retry, retry count 7, rx filter deglitech 100 us */
+	ret = rt1711h_write8(chip, RT1711H_PHYCTRL1, 0xF1);
+	if (ret < 0)
+		return ret;
 
+	/* Decrease wait time of BMC-encoded 1 bit from 2.67us to 2.55us */
+	/* wait time : (val * .4167) us */
+	return rt1711h_write8(chip, RT1711H_PHYCTRL2, 62);
 }
 
 static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
Signature · 1 line
2.25.1

thanks,

Signature · 1 line
heikki
#9 lore raw

Re: [PATCH v3 4/7] usb: typec: tcpci_rt1711h: Add initial phy setting

Quoted 10 lines · Heikki Krogerus

Hi Gene,

Quoted 4 lines · Gene Chen

From: Gene Chen <[email protected]>

Add initial phy setting about phy dicard retry, rx filter deglitech time and BMC-encoded wait time

I'm sorry, but what does "deglitech" mean? Is it just a typo?

deglitch ?

Quoted 47 lines
Quoted 42 lines
---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +14 -1
index df7bfe299987..33d8ea95b7c1 100644
@@ -20,6 +20,9 @@
 #define RT1711H_VID		0x29CF
 #define RT1711H_PID		0x1711
 
+#define RT1711H_PHYCTRL1	0x80
+#define RT1711H_PHYCTRL2	0x81
+
 #define RT1711H_RTCTRL8		0x9B
 
 /* Autoidle timeout = (tout * 2 + 1) * 6.4ms */
@@ -107,8 +110,18 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 		return ret;
 
 	/* dcSRC.DRP : 33% */
-	return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+	ret = rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+	if (ret < 0)
+		return ret;
+
+	/* Enable phy discard retry, retry count 7, rx filter deglitech 100 us */
+	ret = rt1711h_write8(chip, RT1711H_PHYCTRL1, 0xF1);
+	if (ret < 0)
+		return ret;
 
+	/* Decrease wait time of BMC-encoded 1 bit from 2.67us to 2.55us */
+	/* wait time : (val * .4167) us */
+	return rt1711h_write8(chip, RT1711H_PHYCTRL2, 62);
 }
 
 static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
Signature · 1 line
2.25.1

thanks,

Signature · 1 line
heikki
author
#10 lore raw

Re: [PATCH v3 4/7] usb: typec: tcpci_rt1711h: Add initial phy setting

Guenter Roeck <[email protected]> 於 2022年8月2日 週二 下午4:58寫道:

Quoted 7 lines · Heikki Krogerus
Quoted 5 lines

Hi Gene,

Quoted 2 lines · Gene Chen

From: Gene Chen <[email protected]>

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

Add initial phy setting about phy dicard retry, rx filter deglitech time and BMC-encoded wait time

I'm sorry, but what does "deglitech" mean? Is it just a typo?

deglitch ?

Yes, typo, I will fix it.

Quoted 47 lines
Quoted 47 lines
Quoted 41 lines
---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +14 -2
index df7bfe299987..33d8ea95b7c1 100644
@@ -20,6 +20,9 @@
 #define RT1711H_VID                0x29CF
 #define RT1711H_PID                0x1711
 
+#define RT1711H_PHYCTRL1   0x80
+#define RT1711H_PHYCTRL2   0x81
+
 #define RT1711H_RTCTRL8            0x9B
 
 /* Autoidle timeout = (tout * 2 + 1) * 6.4ms */
@@ -107,8 +110,18 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
            return ret;
 
    /* dcSRC.DRP : 33% */
-   return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+   ret = rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+   if (ret < 0)
+           return ret;
+
+   /* Enable phy discard retry, retry count 7, rx filter deglitech 100 us */
+   ret = rt1711h_write8(chip, RT1711H_PHYCTRL1, 0xF1);
+   if (ret < 0)
+           return ret;
 
+   /* Decrease wait time of BMC-encoded 1 bit from 2.67us to 2.55us */
+   /* wait time : (val * .4167) us */
+   return rt1711h_write8(chip, RT1711H_PHYCTRL2, 62);
 }
 
 static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
--
Quoted 1 line

2.25.1

thanks,

--
heikki

author
#11 lore raw

PATCH v3 5/7 usb: typec: tcpci_rt1711h: Add compatible id with rt1715

In reply to Gene Chen

From: Gene Chen <[email protected]>

Add compatible id with rt1715, and add initial setting for specific support PD30 command.

---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 43 ++++++++++++++++++++------
 1 file changed, 34 insertions(+), 9 deletions(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +34 -9
index 33d8ea95b7c1..da35dd3e8a59 100644
@@ -19,6 +19,8 @@
 
 #define RT1711H_VID		0x29CF
 #define RT1711H_PID		0x1711
+#define RT1711H_DID		0x2171
+#define RT1715_DID		0x2173
 
 #define RT1711H_PHYCTRL1	0x80
 #define RT1711H_PHYCTRL2	0x81
@@ -30,6 +32,7 @@
 			    (((ck300) << 7) | ((ship_off) << 5) | \
 			    ((auto_idle) << 3) | ((tout) & 0x07))
 #define RT1711H_AUTOIDLEEN	BIT(3)
+#define RT1711H_ENEXTMSG	BIT(4)
 
 #define RT1711H_RTCTRL11	0x9E
 
@@ -48,6 +51,7 @@ struct rt1711h_chip {
 	struct device *dev;
 	struct regulator *vbus;
 	bool src_en;
+	u16 did;
 };
 
 static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
@@ -84,8 +88,9 @@ static struct rt1711h_chip *tdata_to_rt1711h(struct tcpci_data *tdata)
 
 static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 {
-	int ret;
 	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+	struct regmap *regmap = chip->data.regmap;
+	int ret;
 
 	/* CK 300K from 320K, shipping off, auto_idle enable, tout = 32ms */
 	ret = rt1711h_write8(chip, RT1711H_RTCTRL8,
@@ -93,6 +98,14 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 	if (ret < 0)
 		return ret;
 
+	/* Enable PD30 extended message for RT1715 */
+	if (chip->did == RT1715_DID) {
+		ret = regmap_update_bits(regmap, RT1711H_RTCTRL8,
+					 RT1711H_ENEXTMSG, RT1711H_ENEXTMSG);
+		if (ret < 0)
+			return ret;
+	}
+
 	/* I2C reset : (val + 1) * 12.5ms */
 	ret = rt1711h_write8(chip, RT1711H_RTCTRL11,
 			     RT1711H_RTCTRL11_SET(1, 0x0F));
@@ -230,7 +243,7 @@ static int rt1711h_sw_reset(struct rt1711h_chip *chip)
 	return 0;
 }
 
-static int rt1711h_check_revision(struct i2c_client *i2c)
+static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *chip)
 {
 	int ret;
 
@@ -248,7 +261,15 @@ static int rt1711h_check_revision(struct i2c_client *i2c)
 		dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret);
 		return -ENODEV;
 	}
-	return 0;
+	ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV);
+	if (ret < 0)
+		return ret;
+	if (ret != chip->did) {
+		dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret);
+		return -ENODEV;
+	}
+	dev_dbg(&i2c->dev, "did is 0x%04x\n", ret);
+	return ret;
 }
 
 static int rt1711h_probe(struct i2c_client *client,
@@ -257,16 +278,18 @@ static int rt1711h_probe(struct i2c_client *client,
 	int ret;
 	struct rt1711h_chip *chip;
 
-	ret = rt1711h_check_revision(client);
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->did = (size_t)device_get_match_data(&client->dev);
+
+	ret = rt1711h_check_revision(client, chip);
 	if (ret < 0) {
 		dev_err(&client->dev, "check vid/pid fail\n");
 		return ret;
 	}
 
-	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
-	if (!chip)
-		return -ENOMEM;
-
 	chip->data.regmap = devm_regmap_init_i2c(client,
 						 &rt1711h_regmap_config);
 	if (IS_ERR(chip->data.regmap))
@@ -317,13 +340,15 @@ static int rt1711h_remove(struct i2c_client *client)
 
 static const struct i2c_device_id rt1711h_id[] = {
 	{ "rt1711h", 0 },
+	{ "rt1715", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, rt1711h_id);
 
 #ifdef CONFIG_OF
 static const struct of_device_id rt1711h_of_match[] = {
-	{ .compatible = "richtek,rt1711h", },
+	{ .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID },
+	{ .compatible = "richtek,rt1715", .data = (void *)RT1715_DID },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rt1711h_of_match);
Signature · 1 line
2.25.1
maintainer Acked-by on v3 5/7
#12 lore raw

Re: [PATCH v3 5/7] usb: typec: tcpci_rt1711h: Add compatible id with rt1715

Quoted 6 lines · Gene Chen

From: Gene Chen <[email protected]>

Add compatible id with rt1715, and add initial setting for specific support PD30 command.

Quoted 128 lines
---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 43 ++++++++++++++++++++------
 1 file changed, 34 insertions(+), 9 deletions(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +34 -9
index 33d8ea95b7c1..da35dd3e8a59 100644
@@ -19,6 +19,8 @@
 
 #define RT1711H_VID		0x29CF
 #define RT1711H_PID		0x1711
+#define RT1711H_DID		0x2171
+#define RT1715_DID		0x2173
 
 #define RT1711H_PHYCTRL1	0x80
 #define RT1711H_PHYCTRL2	0x81
@@ -30,6 +32,7 @@
 			    (((ck300) << 7) | ((ship_off) << 5) | \
 			    ((auto_idle) << 3) | ((tout) & 0x07))
 #define RT1711H_AUTOIDLEEN	BIT(3)
+#define RT1711H_ENEXTMSG	BIT(4)
 
 #define RT1711H_RTCTRL11	0x9E
 
@@ -48,6 +51,7 @@ struct rt1711h_chip {
 	struct device *dev;
 	struct regulator *vbus;
 	bool src_en;
+	u16 did;
 };
 
 static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
@@ -84,8 +88,9 @@ static struct rt1711h_chip *tdata_to_rt1711h(struct tcpci_data *tdata)
 
 static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 {
-	int ret;
 	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+	struct regmap *regmap = chip->data.regmap;
+	int ret;
 
 	/* CK 300K from 320K, shipping off, auto_idle enable, tout = 32ms */
 	ret = rt1711h_write8(chip, RT1711H_RTCTRL8,
@@ -93,6 +98,14 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 	if (ret < 0)
 		return ret;
 
+	/* Enable PD30 extended message for RT1715 */
+	if (chip->did == RT1715_DID) {
+		ret = regmap_update_bits(regmap, RT1711H_RTCTRL8,
+					 RT1711H_ENEXTMSG, RT1711H_ENEXTMSG);
+		if (ret < 0)
+			return ret;
+	}
+
 	/* I2C reset : (val + 1) * 12.5ms */
 	ret = rt1711h_write8(chip, RT1711H_RTCTRL11,
 			     RT1711H_RTCTRL11_SET(1, 0x0F));
@@ -230,7 +243,7 @@ static int rt1711h_sw_reset(struct rt1711h_chip *chip)
 	return 0;
 }
 
-static int rt1711h_check_revision(struct i2c_client *i2c)
+static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *chip)
 {
 	int ret;
 
@@ -248,7 +261,15 @@ static int rt1711h_check_revision(struct i2c_client *i2c)
 		dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret);
 		return -ENODEV;
 	}
-	return 0;
+	ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV);
+	if (ret < 0)
+		return ret;
+	if (ret != chip->did) {
+		dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret);
+		return -ENODEV;
+	}
+	dev_dbg(&i2c->dev, "did is 0x%04x\n", ret);
+	return ret;
 }
 
 static int rt1711h_probe(struct i2c_client *client,
@@ -257,16 +278,18 @@ static int rt1711h_probe(struct i2c_client *client,
 	int ret;
 	struct rt1711h_chip *chip;
 
-	ret = rt1711h_check_revision(client);
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->did = (size_t)device_get_match_data(&client->dev);
+
+	ret = rt1711h_check_revision(client, chip);
 	if (ret < 0) {
 		dev_err(&client->dev, "check vid/pid fail\n");
 		return ret;
 	}
 
-	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
-	if (!chip)
-		return -ENOMEM;
-
 	chip->data.regmap = devm_regmap_init_i2c(client,
 						 &rt1711h_regmap_config);
 	if (IS_ERR(chip->data.regmap))
@@ -317,13 +340,15 @@ static int rt1711h_remove(struct i2c_client *client)
 
 static const struct i2c_device_id rt1711h_id[] = {
 	{ "rt1711h", 0 },
+	{ "rt1715", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, rt1711h_id);
 
 #ifdef CONFIG_OF
 static const struct of_device_id rt1711h_of_match[] = {
-	{ .compatible = "richtek,rt1711h", },
+	{ .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID },
+	{ .compatible = "richtek,rt1715", .data = (void *)RT1715_DID },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rt1711h_of_match);
Signature · 1 line
2.25.1
Signature · 1 line
heikki
author
#13 lore raw

PATCH v3 6/7 usb: typec: tcpci: Move function "tcpci_to_typec_cc" to common

In reply to Gene Chen

From: Gene Chen <[email protected]>

Move transition function "tcpci_to_typec_cc" to common header

---
 drivers/usb/typec/tcpm/tcpci.c | 22 ----------------------
 drivers/usb/typec/tcpm/tcpci.h | 23 +++++++++++++++++++++++
 2 files changed, 23 insertions(+), 22 deletions(-)
drivers/usb/typec/tcpm/tcpci.c +0 -22
index f33e08eb7670..0f45d456df32 100644
@@ -28,11 +28,6 @@
 #define	VPPS_VALID_MIN_MV			100
 #define	VSINKDISCONNECT_PD_MIN_PERCENT		90
 
-#define tcpc_presenting_rd(reg, cc) \
-	(!(TCPC_ROLE_CTRL_DRP & (reg)) && \
-	 (((reg) & (TCPC_ROLE_CTRL_## cc ##_MASK << TCPC_ROLE_CTRL_## cc ##_SHIFT)) == \
-	  (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_## cc ##_SHIFT)))
-
 struct tcpci {
 	struct device *dev;
 
@@ -219,23 +214,6 @@ static int tcpci_start_toggling(struct tcpc_dev *tcpc,
 			    TCPC_CMD_LOOK4CONNECTION);
 }
 
-static enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink)
-{
-	switch (cc) {
-	case 0x1:
-		return sink ? TYPEC_CC_RP_DEF : TYPEC_CC_RA;
-	case 0x2:
-		return sink ? TYPEC_CC_RP_1_5 : TYPEC_CC_RD;
-	case 0x3:
-		if (sink)
-			return TYPEC_CC_RP_3_0;
-		fallthrough;
-	case 0x0:
-	default:
-		return TYPEC_CC_OPEN;
-	}
-}
-
 static int tcpci_get_cc(struct tcpc_dev *tcpc,
 			enum typec_cc_status *cc1, enum typec_cc_status *cc2)
 {
drivers/usb/typec/tcpm/tcpci.h +23 -0
index b2edd45f13c6..3f45cb0426df 100644
@@ -166,6 +166,11 @@
 /* I2C_WRITE_BYTE_COUNT + 1 when TX_BUF_BYTE_x is only accessible I2C_WRITE_BYTE_COUNT */
 #define TCPC_TRANSMIT_BUFFER_MAX_LEN		31
 
+#define tcpc_presenting_rd(reg, cc) \
+	(!(TCPC_ROLE_CTRL_DRP & (reg)) && \
+	 (((reg) & (TCPC_ROLE_CTRL_## cc ##_MASK << TCPC_ROLE_CTRL_## cc ##_SHIFT)) == \
+	  (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_## cc ##_SHIFT)))
+
 struct tcpci;
 
 /*
@@ -206,4 +211,22 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci);
 
 struct tcpm_port;
 struct tcpm_port *tcpci_get_tcpm_port(struct tcpci *tcpci);
+
+static inline enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink)
+{
+	switch (cc) {
+	case 0x1:
+		return sink ? TYPEC_CC_RP_DEF : TYPEC_CC_RA;
+	case 0x2:
+		return sink ? TYPEC_CC_RP_1_5 : TYPEC_CC_RD;
+	case 0x3:
+		if (sink)
+			return TYPEC_CC_RP_3_0;
+		fallthrough;
+	case 0x0:
+	default:
+		return TYPEC_CC_OPEN;
+	}
+}
+
 #endif /* __LINUX_USB_TCPCI_H */
Signature · 1 line
2.25.1
maintainer Acked-by on v3 6/7
#14 lore raw

Re: [PATCH v3 6/7] usb: typec: tcpci: Move function "tcpci_to_typec_cc" to common

Quoted 5 lines · Gene Chen

From: Gene Chen <[email protected]>

Move transition function "tcpci_to_typec_cc" to common header

Quoted 86 lines
---
 drivers/usb/typec/tcpm/tcpci.c | 22 ----------------------
 drivers/usb/typec/tcpm/tcpci.h | 23 +++++++++++++++++++++++
 2 files changed, 23 insertions(+), 22 deletions(-)
drivers/usb/typec/tcpm/tcpci.c +0 -22
index f33e08eb7670..0f45d456df32 100644
@@ -28,11 +28,6 @@
 #define	VPPS_VALID_MIN_MV			100
 #define	VSINKDISCONNECT_PD_MIN_PERCENT		90
 
-#define tcpc_presenting_rd(reg, cc) \
-	(!(TCPC_ROLE_CTRL_DRP & (reg)) && \
-	 (((reg) & (TCPC_ROLE_CTRL_## cc ##_MASK << TCPC_ROLE_CTRL_## cc ##_SHIFT)) == \
-	  (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_## cc ##_SHIFT)))
-
 struct tcpci {
 	struct device *dev;
 
@@ -219,23 +214,6 @@ static int tcpci_start_toggling(struct tcpc_dev *tcpc,
 			    TCPC_CMD_LOOK4CONNECTION);
 }
 
-static enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink)
-{
-	switch (cc) {
-	case 0x1:
-		return sink ? TYPEC_CC_RP_DEF : TYPEC_CC_RA;
-	case 0x2:
-		return sink ? TYPEC_CC_RP_1_5 : TYPEC_CC_RD;
-	case 0x3:
-		if (sink)
-			return TYPEC_CC_RP_3_0;
-		fallthrough;
-	case 0x0:
-	default:
-		return TYPEC_CC_OPEN;
-	}
-}
-
 static int tcpci_get_cc(struct tcpc_dev *tcpc,
 			enum typec_cc_status *cc1, enum typec_cc_status *cc2)
 {
drivers/usb/typec/tcpm/tcpci.h +23 -0
index b2edd45f13c6..3f45cb0426df 100644
@@ -166,6 +166,11 @@
 /* I2C_WRITE_BYTE_COUNT + 1 when TX_BUF_BYTE_x is only accessible I2C_WRITE_BYTE_COUNT */
 #define TCPC_TRANSMIT_BUFFER_MAX_LEN		31
 
+#define tcpc_presenting_rd(reg, cc) \
+	(!(TCPC_ROLE_CTRL_DRP & (reg)) && \
+	 (((reg) & (TCPC_ROLE_CTRL_## cc ##_MASK << TCPC_ROLE_CTRL_## cc ##_SHIFT)) == \
+	  (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_## cc ##_SHIFT)))
+
 struct tcpci;
 
 /*
@@ -206,4 +211,22 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci);
 
 struct tcpm_port;
 struct tcpm_port *tcpci_get_tcpm_port(struct tcpci *tcpci);
+
+static inline enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink)
+{
+	switch (cc) {
+	case 0x1:
+		return sink ? TYPEC_CC_RP_DEF : TYPEC_CC_RA;
+	case 0x2:
+		return sink ? TYPEC_CC_RP_1_5 : TYPEC_CC_RD;
+	case 0x3:
+		if (sink)
+			return TYPEC_CC_RP_3_0;
+		fallthrough;
+	case 0x0:
+	default:
+		return TYPEC_CC_OPEN;
+	}
+}
+
 #endif /* __LINUX_USB_TCPCI_H */
Signature · 1 line
2.25.1
Signature · 1 line
heikki
author
#15 lore raw

PATCH v3 7/7 usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage level

In reply to Gene Chen

From: Gene Chen <[email protected]>

Fix CC PHY noise filter of voltage level according to current cc voltage level

---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 58 +++++++++++++++++++++++++-
 1 file changed, 57 insertions(+), 1 deletion(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +57 -1
index da35dd3e8a59..6d2568de553b 100644
@@ -25,8 +25,11 @@
 #define RT1711H_PHYCTRL1	0x80
 #define RT1711H_PHYCTRL2	0x81
 
-#define RT1711H_RTCTRL8		0x9B
+#define RT1711H_RTCTRL4		0x93
+/* rx threshold of rd/rp: 1b0 for level 0.4V/0.7V, 1b1 for 0.35V/0.75V */
+#define RT1711H_BMCIO_RXDZSEL	BIT(0)
 
+#define RT1711H_RTCTRL8		0x9B
 /* Autoidle timeout = (tout * 2 + 1) * 6.4ms */
 #define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \
 			    (((ck300) << 7) | ((ship_off) << 5) | \
@@ -45,6 +48,10 @@
 #define RT1711H_RTCTRL15	0xA2
 #define RT1711H_RTCTRL16	0xA3
 
+#define RT1711H_RTCTRL18	0xAF
+/* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */
+#define BMCIO_RXDZEN	BIT(0)
+
 struct rt1711h_chip {
 	struct tcpci_data data;
 	struct tcpci *tcpci;
@@ -165,6 +172,53 @@ static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
 				  RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN);
 }
 
+/*
+ * Selects the CC PHY noise filter voltage level according to the remote current
+ * CC voltage level.
+ *
+ * @status: The port's current cc status read from IC
+ * Return 0 if writes succeed; failure code otherwise
+ */
+static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status)
+{
+	int ret, cc1, cc2;
+	u8 role = 0;
+	u32 rxdz_en, rxdz_sel;
+
+	ret = rt1711h_read8(chip, TCPC_ROLE_CTRL, &role);
+	if (ret < 0)
+		return ret;
+
+	cc1 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC1_SHIFT) &
+				TCPC_CC_STATUS_CC1_MASK,
+				status & TCPC_CC_STATUS_TERM ||
+				tcpc_presenting_rd(role, CC1));
+	cc2 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC2_SHIFT) &
+				TCPC_CC_STATUS_CC2_MASK,
+				status & TCPC_CC_STATUS_TERM ||
+				tcpc_presenting_rd(role, CC2));
+
+	if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) ||
+	    (cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) {
+		rxdz_en = BMCIO_RXDZEN;
+		if (chip->did == RT1715_DID)
+			rxdz_sel = RT1711H_BMCIO_RXDZSEL;
+		else
+			rxdz_sel = 0;
+	} else {
+		rxdz_en = 0;
+		rxdz_sel = RT1711H_BMCIO_RXDZSEL;
+	}
+
+	ret = regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL18,
+				 BMCIO_RXDZEN, rxdz_en);
+	if (ret < 0)
+		return ret;
+
+	return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL4,
+				  RT1711H_BMCIO_RXDZSEL, rxdz_sel);
+}
+
 static int rt1711h_start_drp_toggling(struct tcpci *tcpci,
 				      struct tcpci_data *tdata,
 				      enum typec_cc_status cc)
@@ -225,6 +279,8 @@ static irqreturn_t rt1711h_irq(int irq, void *dev_id)
 		/* Clear cc change event triggered by starting toggling */
 		if (status & TCPC_CC_STATUS_TOGGLING)
 			rt1711h_write8(chip, TCPC_ALERT, TCPC_ALERT_CC_STATUS);
+		else
+			rt1711h_init_cc_params(chip, status);
 	}
 
 out:
Signature · 1 line
2.25.1
maintainer Acked-by on v3 7/7
#16 lore raw

Re: [PATCH v3 7/7] usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage level

Quoted 6 lines · Gene Chen

From: Gene Chen <[email protected]>

Fix CC PHY noise filter of voltage level according to current cc voltage level

I was unable to apply this series on top of Greg's latest usb-next, so I think you need to rebase these. But in any case, for this patch FWIW:

Quoted 97 lines
---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 58 +++++++++++++++++++++++++-
 1 file changed, 57 insertions(+), 1 deletion(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +57 -1
index da35dd3e8a59..6d2568de553b 100644
@@ -25,8 +25,11 @@
 #define RT1711H_PHYCTRL1	0x80
 #define RT1711H_PHYCTRL2	0x81
 
-#define RT1711H_RTCTRL8		0x9B
+#define RT1711H_RTCTRL4		0x93
+/* rx threshold of rd/rp: 1b0 for level 0.4V/0.7V, 1b1 for 0.35V/0.75V */
+#define RT1711H_BMCIO_RXDZSEL	BIT(0)
 
+#define RT1711H_RTCTRL8		0x9B
 /* Autoidle timeout = (tout * 2 + 1) * 6.4ms */
 #define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \
 			    (((ck300) << 7) | ((ship_off) << 5) | \
@@ -45,6 +48,10 @@
 #define RT1711H_RTCTRL15	0xA2
 #define RT1711H_RTCTRL16	0xA3
 
+#define RT1711H_RTCTRL18	0xAF
+/* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */
+#define BMCIO_RXDZEN	BIT(0)
+
 struct rt1711h_chip {
 	struct tcpci_data data;
 	struct tcpci *tcpci;
@@ -165,6 +172,53 @@ static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
 				  RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN);
 }
 
+/*
+ * Selects the CC PHY noise filter voltage level according to the remote current
+ * CC voltage level.
+ *
+ * @status: The port's current cc status read from IC
+ * Return 0 if writes succeed; failure code otherwise
+ */
+static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status)
+{
+	int ret, cc1, cc2;
+	u8 role = 0;
+	u32 rxdz_en, rxdz_sel;
+
+	ret = rt1711h_read8(chip, TCPC_ROLE_CTRL, &role);
+	if (ret < 0)
+		return ret;
+
+	cc1 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC1_SHIFT) &
+				TCPC_CC_STATUS_CC1_MASK,
+				status & TCPC_CC_STATUS_TERM ||
+				tcpc_presenting_rd(role, CC1));
+	cc2 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC2_SHIFT) &
+				TCPC_CC_STATUS_CC2_MASK,
+				status & TCPC_CC_STATUS_TERM ||
+				tcpc_presenting_rd(role, CC2));
+
+	if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) ||
+	    (cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) {
+		rxdz_en = BMCIO_RXDZEN;
+		if (chip->did == RT1715_DID)
+			rxdz_sel = RT1711H_BMCIO_RXDZSEL;
+		else
+			rxdz_sel = 0;
+	} else {
+		rxdz_en = 0;
+		rxdz_sel = RT1711H_BMCIO_RXDZSEL;
+	}
+
+	ret = regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL18,
+				 BMCIO_RXDZEN, rxdz_en);
+	if (ret < 0)
+		return ret;
+
+	return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL4,
+				  RT1711H_BMCIO_RXDZSEL, rxdz_sel);
+}
+
 static int rt1711h_start_drp_toggling(struct tcpci *tcpci,
 				      struct tcpci_data *tdata,
 				      enum typec_cc_status cc)
@@ -225,6 +279,8 @@ static irqreturn_t rt1711h_irq(int irq, void *dev_id)
 		/* Clear cc change event triggered by starting toggling */
 		if (status & TCPC_CC_STATUS_TOGGLING)
 			rt1711h_write8(chip, TCPC_ALERT, TCPC_ALERT_CC_STATUS);
+		else
+			rt1711h_init_cc_params(chip, status);
 	}
 
 out:
Signature · 1 line
2.25.1
Signature · 1 line
heikki