Skip to contentSkip to conversation

perf stat: refactor __run_perf_stat common code

PATCH In review Adrián Herrera Arcila 5 participants 12 messages Jul 29, 2022 – Dec 15, 2022 perf events

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 perf stat: refactor __run_perf_stat common code

This extracts common code from the branches of the forks if-then-else. enable_counters(), which was at the beginning of both branches of the conditional, is now unconditional; evlist__start_workload is extracted to a different if, which enables making the common clocking code unconditional.

---
 tools/perf/builtin-stat.c | 25 +++++++++----------------
 1 file changed, 9 insertions(+), 16 deletions(-)
tools/perf/builtin-stat.c +9 -16
index d2ecd4d29624..318ffd119dad 100644
@@ -966,18 +966,18 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 			return err;
 	}
 
-	/*
-	 * Enable counters and exec the command:
-	 */
-	if (forks) {
-		err = enable_counters();
-		if (err)
-			return -1;
+	err = enable_counters();
+	if (err)
+		return -1;
+
+	/* Exec the command, if any */
+	if (forks)
 		evlist__start_workload(evsel_list);
 
-		t0 = rdclock();
-		clock_gettime(CLOCK_MONOTONIC, &ref_time);
+	t0 = rdclock();
+	clock_gettime(CLOCK_MONOTONIC, &ref_time);
 
+	if (forks) {
 		if (interval || timeout || evlist__ctlfd_initialized(evsel_list))
 			status = dispatch_events(forks, timeout, interval, &times);
 		if (child_pid != -1) {
@@ -995,13 +995,6 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 		if (WIFSIGNALED(status))
 			psignal(WTERMSIG(status), argv[0]);
 	} else {
-		err = enable_counters();
-		if (err)
-			return -1;
-
-		t0 = rdclock();
-		clock_gettime(CLOCK_MONOTONIC, &ref_time);
-
 		status = dispatch_events(forks, timeout, interval, &times);
 	}
 
Signature · 1 line
2.36.1
#1 lore raw

PATCH 2/2 perf stat: fix unexpected delay behaviour

The described --delay behaviour is to delay the enablement of events, but not the execution of the command, if one is passed, which is incorrectly the current behaviour.

This patch decouples the enablement from the delay, and enables events before or after launching the workload dependent on the options passed by the user. This code structure is inspired by that in perf-record, and tries to be consistent with it.

Fixes d0a0a511493d ("perf stat: Fix forked applications enablement of counters")
---
 tools/perf/builtin-stat.c | 56 ++++++++++++++++++++++-----------------
 1 file changed, 32 insertions(+), 24 deletions(-)
tools/perf/builtin-stat.c +32 -24
index 318ffd119dad..f98c823b16dd 100644
@@ -559,7 +559,7 @@ static bool handle_interval(unsigned int interval, int *times)
 	return false;
 }
 
-static int enable_counters(void)
+static int enable_bpf_counters(void)
 {
 	struct evsel *evsel;
 	int err;
@@ -572,28 +572,6 @@ static int enable_counters(void)
 		if (err)
 			return err;
 	}
-
-	if (stat_config.initial_delay < 0) {
-		pr_info(EVLIST_DISABLED_MSG);
-		return 0;
-	}
-
-	if (stat_config.initial_delay > 0) {
-		pr_info(EVLIST_DISABLED_MSG);
-		usleep(stat_config.initial_delay * USEC_PER_MSEC);
-	}
-
-	/*
-	 * We need to enable counters only if:
-	 * - we don't have tracee (attaching to task or cpu)
-	 * - we have initial delay configured
-	 */
-	if (!target__none(&target) || stat_config.initial_delay) {
-		if (!all_counters_use_bpf)
-			evlist__enable(evsel_list);
-		if (stat_config.initial_delay > 0)
-			pr_info(EVLIST_ENABLED_MSG);
-	}
 	return 0;
 }
 
@@ -966,10 +944,24 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 			return err;
 	}
 
-	err = enable_counters();
+	err = enable_bpf_counters();
 	if (err)
 		return -1;
 
+	/*
+	 * Enable events manually here if perf-stat is run:
+	 * 1. with a target (any of --all-cpus, --cpu, --pid or --tid)
+	 * 2. without measurement delay (no --delay)
+	 * 3. without all events associated to BPF
+	 *
+	 * This is because if run with a target, events are not enabled
+	 * on exec if a workload is passed, and because there is no delay
+	 * we ensure to enable them before the workload starts
+	 */
+	if (!target__none(&target) && !stat_config.initial_delay &&
+	    !all_counters_use_bpf)
+		evlist__enable(evsel_list);
+
 	/* Exec the command, if any */
 	if (forks)
 		evlist__start_workload(evsel_list);
@@ -977,6 +969,22 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 	t0 = rdclock();
 	clock_gettime(CLOCK_MONOTONIC, &ref_time);
 
+	/*
+	 * If a measurement delay was specified, start it, and if positive,
+	 * enable events manually after. We respect the delay even if all
+	 * events are associated to BPF
+	 */
+	if (stat_config.initial_delay) {
+		/* At this point, events are guaranteed disabled */
+		pr_info(EVLIST_DISABLED_MSG);
+		if (stat_config.initial_delay > 0) {
+			usleep(stat_config.initial_delay * USEC_PER_MSEC);
+			if (!all_counters_use_bpf)
+				evlist__enable(evsel_list);
+			pr_info(EVLIST_ENABLED_MSG);
+		}
+	}
+
 	if (forks) {
 		if (interval || timeout || evlist__ctlfd_initialized(evsel_list))
 			status = dispatch_events(forks, timeout, interval, &times);
Signature · 1 line
2.36.1
Reviewed-by on v1 2/2
#2 lore raw

Re: [PATCH 2/2] perf stat: fix unexpected delay behaviour

Quoted 9 lines · Adrián Herrera Arcila

The described --delay behaviour is to delay the enablement of events, but not the execution of the command, if one is passed, which is incorrectly the current behaviour.

This patch decouples the enablement from the delay, and enables events before or after launching the workload dependent on the options passed by the user. This code structure is inspired by that in perf-record, and tries to be consistent with it.

Quoted 6 lines
Fixes d0a0a511493d ("perf stat: Fix forked applications enablement of counters")
---
 tools/perf/builtin-stat.c | 56 ++++++++++++++++++++++-----------------
 1 file changed, 32 insertions(+), 24 deletions(-)

Looks good to me. Fixes the counter delay issue and the code is pretty similar to perf record now. Although I would wait for Leo's or Song's comment as well because they were involved.

Quoted 92 lines
tools/perf/builtin-stat.c +32 -24
index 318ffd119dad..f98c823b16dd 100644
@@ -559,7 +559,7 @@ static bool handle_interval(unsigned int interval, int *times)
 	return false;
 }
 
-static int enable_counters(void)
+static int enable_bpf_counters(void)
 {
 	struct evsel *evsel;
 	int err;
@@ -572,28 +572,6 @@ static int enable_counters(void)
 		if (err)
 			return err;
 	}
-
-	if (stat_config.initial_delay < 0) {
-		pr_info(EVLIST_DISABLED_MSG);
-		return 0;
-	}
-
-	if (stat_config.initial_delay > 0) {
-		pr_info(EVLIST_DISABLED_MSG);
-		usleep(stat_config.initial_delay * USEC_PER_MSEC);
-	}
-
-	/*
-	 * We need to enable counters only if:
-	 * - we don't have tracee (attaching to task or cpu)
-	 * - we have initial delay configured
-	 */
-	if (!target__none(&target) || stat_config.initial_delay) {
-		if (!all_counters_use_bpf)
-			evlist__enable(evsel_list);
-		if (stat_config.initial_delay > 0)
-			pr_info(EVLIST_ENABLED_MSG);
-	}
 	return 0;
 }
 
@@ -966,10 +944,24 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 			return err;
 	}
 
-	err = enable_counters();
+	err = enable_bpf_counters();
 	if (err)
 		return -1;
 
+	/*
+	 * Enable events manually here if perf-stat is run:
+	 * 1. with a target (any of --all-cpus, --cpu, --pid or --tid)
+	 * 2. without measurement delay (no --delay)
+	 * 3. without all events associated to BPF
+	 *
+	 * This is because if run with a target, events are not enabled
+	 * on exec if a workload is passed, and because there is no delay
+	 * we ensure to enable them before the workload starts
+	 */
+	if (!target__none(&target) && !stat_config.initial_delay &&
+	    !all_counters_use_bpf)
+		evlist__enable(evsel_list);
+
 	/* Exec the command, if any */
 	if (forks)
 		evlist__start_workload(evsel_list);
@@ -977,6 +969,22 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 	t0 = rdclock();
 	clock_gettime(CLOCK_MONOTONIC, &ref_time);
 
+	/*
+	 * If a measurement delay was specified, start it, and if positive,
+	 * enable events manually after. We respect the delay even if all
+	 * events are associated to BPF
+	 */
+	if (stat_config.initial_delay) {
+		/* At this point, events are guaranteed disabled */
+		pr_info(EVLIST_DISABLED_MSG);
+		if (stat_config.initial_delay > 0) {
+			usleep(stat_config.initial_delay * USEC_PER_MSEC);
+			if (!all_counters_use_bpf)
+				evlist__enable(evsel_list);
+			pr_info(EVLIST_ENABLED_MSG);
+		}
+	}
+
 	if (forks) {
 		if (interval || timeout || evlist__ctlfd_initialized(evsel_list))
 			status = dispatch_events(forks, timeout, interval, &times);
#3 lore raw

Re: [PATCH 2/2] perf stat: fix unexpected delay behaviour

Em Mon, Aug 01, 2022 at 09:20:37AM +0100, James Clark escreveu:

Quoted 19 lines · Adrián Herrera Arcila
Quoted 9 lines

The described --delay behaviour is to delay the enablement of events, but not the execution of the command, if one is passed, which is incorrectly the current behaviour.

This patch decouples the enablement from the delay, and enables events before or after launching the workload dependent on the options passed by the user. This code structure is inspired by that in perf-record, and tries to be consistent with it.

Quoted 6 lines
Fixes d0a0a511493d ("perf stat: Fix forked applications enablement of counters")
---
 tools/perf/builtin-stat.c | 56 ++++++++++++++++++++++-----------------
 1 file changed, 32 insertions(+), 24 deletions(-)
Quoted 3 lines

Looks good to me. Fixes the counter delay issue and the code is pretty similar to perf record now. Although I would wait for Leo's or Song's comment as well because they were involved.

I think I didn't notice Leo's ack, it still applies, so I'm doing it now.

- Arnaldo

Quoted 94 lines
Quoted 92 lines
tools/perf/builtin-stat.c +32 -24
index 318ffd119dad..f98c823b16dd 100644
@@ -559,7 +559,7 @@ static bool handle_interval(unsigned int interval, int *times)
 	return false;
 }
 
-static int enable_counters(void)
+static int enable_bpf_counters(void)
 {
 	struct evsel *evsel;
 	int err;
@@ -572,28 +572,6 @@ static int enable_counters(void)
 		if (err)
 			return err;
 	}
-
-	if (stat_config.initial_delay < 0) {
-		pr_info(EVLIST_DISABLED_MSG);
-		return 0;
-	}
-
-	if (stat_config.initial_delay > 0) {
-		pr_info(EVLIST_DISABLED_MSG);
-		usleep(stat_config.initial_delay * USEC_PER_MSEC);
-	}
-
-	/*
-	 * We need to enable counters only if:
-	 * - we don't have tracee (attaching to task or cpu)
-	 * - we have initial delay configured
-	 */
-	if (!target__none(&target) || stat_config.initial_delay) {
-		if (!all_counters_use_bpf)
-			evlist__enable(evsel_list);
-		if (stat_config.initial_delay > 0)
-			pr_info(EVLIST_ENABLED_MSG);
-	}
 	return 0;
 }
 
@@ -966,10 +944,24 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 			return err;
 	}
 
-	err = enable_counters();
+	err = enable_bpf_counters();
 	if (err)
 		return -1;
 
+	/*
+	 * Enable events manually here if perf-stat is run:
+	 * 1. with a target (any of --all-cpus, --cpu, --pid or --tid)
+	 * 2. without measurement delay (no --delay)
+	 * 3. without all events associated to BPF
+	 *
+	 * This is because if run with a target, events are not enabled
+	 * on exec if a workload is passed, and because there is no delay
+	 * we ensure to enable them before the workload starts
+	 */
+	if (!target__none(&target) && !stat_config.initial_delay &&
+	    !all_counters_use_bpf)
+		evlist__enable(evsel_list);
+
 	/* Exec the command, if any */
 	if (forks)
 		evlist__start_workload(evsel_list);
@@ -977,6 +969,22 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 	t0 = rdclock();
 	clock_gettime(CLOCK_MONOTONIC, &ref_time);
 
+	/*
+	 * If a measurement delay was specified, start it, and if positive,
+	 * enable events manually after. We respect the delay even if all
+	 * events are associated to BPF
+	 */
+	if (stat_config.initial_delay) {
+		/* At this point, events are guaranteed disabled */
+		pr_info(EVLIST_DISABLED_MSG);
+		if (stat_config.initial_delay > 0) {
+			usleep(stat_config.initial_delay * USEC_PER_MSEC);
+			if (!all_counters_use_bpf)
+				evlist__enable(evsel_list);
+			pr_info(EVLIST_ENABLED_MSG);
+		}
+	}
+
 	if (forks) {
 		if (interval || timeout || evlist__ctlfd_initialized(evsel_list))
 			status = dispatch_events(forks, timeout, interval, &times);
Signature · 1 line
- Arnaldo
maintainer
#4 lore raw

Re: [PATCH 2/2] perf stat: fix unexpected delay behaviour

Hi,

Quoted 21 lines · Arnaldo Carvalho de Melo

Em Mon, Aug 01, 2022 at 09:20:37AM +0100, James Clark escreveu:

Quoted 19 lines · Adrián Herrera Arcila
Quoted 15 lines

The described --delay behaviour is to delay the enablement of events, but not the execution of the command, if one is passed, which is incorrectly the current behaviour.

This patch decouples the enablement from the delay, and enables events before or after launching the workload dependent on the options passed by the user. This code structure is inspired by that in perf-record, and tries to be consistent with it.

Fixes d0a0a511493d ("perf stat: Fix forked applications enablement of counters")
---
 tools/perf/builtin-stat.c | 56 ++++++++++++++++++++++-----------------
 1 file changed, 32 insertions(+), 24 deletions(-)
Quoted 6 lines
Quoted 3 lines

Looks good to me. Fixes the counter delay issue and the code is pretty similar to perf record now. Although I would wait for Leo's or Song's comment as well because they were involved.

I think I didn't notice Leo's ack, it still applies, so I'm doing it now.

I think the BPF counters should be enabled/disabled together.

Thanks,
Namhyung

#5 lore raw

Re: [PATCH 2/2] perf stat: fix unexpected delay behaviour

Quoted 25 lines · Namhyung Kim

Hi,

Quoted 21 lines · Arnaldo Carvalho de Melo

Em Mon, Aug 01, 2022 at 09:20:37AM +0100, James Clark escreveu:

Quoted 19 lines · Adrián Herrera Arcila
Quoted 15 lines

The described --delay behaviour is to delay the enablement of events, but not the execution of the command, if one is passed, which is incorrectly the current behaviour.

This patch decouples the enablement from the delay, and enables events before or after launching the workload dependent on the options passed by the user. This code structure is inspired by that in perf-record, and tries to be consistent with it.

Fixes d0a0a511493d ("perf stat: Fix forked applications enablement of counters")
---
 tools/perf/builtin-stat.c | 56 ++++++++++++++++++++++-----------------
 1 file changed, 32 insertions(+), 24 deletions(-)
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

Looks good to me. Fixes the counter delay issue and the code is pretty similar to perf record now. Although I would wait for Leo's or Song's comment as well because they were involved.

I think I didn't notice Leo's ack, it still applies, so I'm doing it now.

I think the BPF counters should be enabled/disabled together.

I did notice that difference between the two, but I wasn't sure of the exact reason that it was done that way on Adrián's version. It seems like it's not separated in perf record so maybe you are right.

Quoted 3 lines

Thanks,
Namhyung

#6 lore raw

Re: [PATCH 2/2] perf stat: fix unexpected delay behaviour

In reply to Namhyung Kim

Em Tue, Dec 13, 2022 at 08:40:31AM -0800, Namhyung Kim escreveu:

Quoted 25 lines

Hi,

Quoted 21 lines · Arnaldo Carvalho de Melo

Em Mon, Aug 01, 2022 at 09:20:37AM +0100, James Clark escreveu:

Quoted 19 lines · Adrián Herrera Arcila
Quoted 15 lines

The described --delay behaviour is to delay the enablement of events, but not the execution of the command, if one is passed, which is incorrectly the current behaviour.

This patch decouples the enablement from the delay, and enables events before or after launching the workload dependent on the options passed by the user. This code structure is inspired by that in perf-record, and tries to be consistent with it.

Fixes d0a0a511493d ("perf stat: Fix forked applications enablement of counters")
---
 tools/perf/builtin-stat.c | 56 ++++++++++++++++++++++-----------------
 1 file changed, 32 insertions(+), 24 deletions(-)
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

Looks good to me. Fixes the counter delay issue and the code is pretty similar to perf record now. Although I would wait for Leo's or Song's comment as well because they were involved.

I think I didn't notice Leo's ack, it still applies, so I'm doing it now.

I think the BPF counters should be enabled/disabled together.

Ok, so I removed this one and applied Namhyung's.

- Arnaldo

#7 lore raw

Re: [PATCH 2/2] perf stat: fix unexpected delay behaviour

Quoted 30 lines · Arnaldo Carvalho de Melo

Em Tue, Dec 13, 2022 at 08:40:31AM -0800, Namhyung Kim escreveu:

Quoted 29 lines

Hi,

Quoted 25 lines · Arnaldo Carvalho de Melo

Em Mon, Aug 01, 2022 at 09:20:37AM +0100, James Clark escreveu:

Quoted 22 lines · Adrián Herrera Arcila
Quoted 9 lines

The described --delay behaviour is to delay the enablement of events, but not the execution of the command, if one is passed, which is incorrectly the current behaviour.

This patch decouples the enablement from the delay, and enables events before or after launching the workload dependent on the options passed by the user. This code structure is inspired by that in perf-record, and tries to be consistent with it.

Quoted 6 lines
Fixes d0a0a511493d ("perf stat: Fix forked applications enablement of counters")
---
 tools/perf/builtin-stat.c | 56 ++++++++++++++++++++++-----------------
 1 file changed, 32 insertions(+), 24 deletions(-)

Looks good to me. Fixes the counter delay issue and the code is pretty similar to perf record now. Although I would wait for Leo's or Song's comment as well because they were involved.

Quoted 6 lines
Quoted 4 lines
Quoted 2 lines

I think I didn't notice Leo's ack, it still applies, so I'm doing it now.

I think the BPF counters should be enabled/disabled together.

Ok, so I removed this one and applied Namhyung's.

I can guess why Adrián doesn't enable/disable BPF counters together :)

Since 'perf stat' doesn't enable BPF counters with other normal PMU events in the first place, I believe this is deliberately by Song's patch fa853c4b839e ("perf stat: Enable counting events for BPF programs"), it says:

"'perf stat -b' creates per-cpu perf_event and loads fentry/fexit BPF programs (monitor-progs) to the target BPF program (target-prog). The monitor-progs read perf_event before and after the target-prog, and aggregate the difference in a BPF map. Then the user space reads data from these maps".

IIUC, when loading eBPF (counter) program, perf tool needs to handle eBPF program map specially (so that perf tool can know the latest eBPF program's map in kernel).

I don't know anything for eBPF counter, so this is why I am still a bit puzzle which way is right to do (bind vs separate eBPF counters). But I personally prefer to let eBPF counter to respect delay, so it's fine for me to apply Namhyung's patch.

Thanks,
Leo

#8 lore raw

Re: [PATCH 2/2] perf stat: fix unexpected delay behaviour

Em Wed, Dec 14, 2022 at 11:57:21PM +0800, Leo Yan escreveu:

Quoted 51 lines · Arnaldo Carvalho de Melo
Quoted 30 lines

Em Tue, Dec 13, 2022 at 08:40:31AM -0800, Namhyung Kim escreveu:

Quoted 29 lines

Hi,

Quoted 25 lines · Arnaldo Carvalho de Melo

Em Mon, Aug 01, 2022 at 09:20:37AM +0100, James Clark escreveu:

Quoted 22 lines · Adrián Herrera Arcila
Quoted 9 lines

The described --delay behaviour is to delay the enablement of events, but not the execution of the command, if one is passed, which is incorrectly the current behaviour.

This patch decouples the enablement from the delay, and enables events before or after launching the workload dependent on the options passed by the user. This code structure is inspired by that in perf-record, and tries to be consistent with it.

Quoted 6 lines
Fixes d0a0a511493d ("perf stat: Fix forked applications enablement of counters")
---
 tools/perf/builtin-stat.c | 56 ++++++++++++++++++++++-----------------
 1 file changed, 32 insertions(+), 24 deletions(-)

Looks good to me. Fixes the counter delay issue and the code is pretty similar to perf record now. Although I would wait for Leo's or Song's comment as well because they were involved.

Quoted 6 lines
Quoted 4 lines
Quoted 2 lines

I think I didn't notice Leo's ack, it still applies, so I'm doing it now.

I think the BPF counters should be enabled/disabled together.

Ok, so I removed this one and applied Namhyung's.

I can guess why Adrián doesn't enable/disable BPF counters together :)

Since 'perf stat' doesn't enable BPF counters with other normal PMU events in the first place, I believe this is deliberately by Song's patch fa853c4b839e ("perf stat: Enable counting events for BPF programs"), it says:

"'perf stat -b' creates per-cpu perf_event and loads fentry/fexit BPF programs (monitor-progs) to the target BPF program (target-prog). The monitor-progs read perf_event before and after the target-prog, and aggregate the difference in a BPF map. Then the user space reads data from these maps".

Quoted 8 lines

IIUC, when loading eBPF (counter) program, perf tool needs to handle eBPF program map specially (so that perf tool can know the latest eBPF program's map in kernel).

I don't know anything for eBPF counter, so this is why I am still a bit puzzle which way is right to do (bind vs separate eBPF counters). But I personally prefer to let eBPF counter to respect delay, so it's fine for me to apply Namhyung's patch.

"I'm fine" can be read as an Acked-by, right? :-)

- Arnaldo

#9 lore raw

Re: [PATCH 2/2] perf stat: fix unexpected delay behaviour

On Wed, Dec 14, 2022 at 02:35:01PM -0300, Arnaldo Carvalho de Melo wrote:

[...]

Quoted 6 lines
Quoted 4 lines

I don't know anything for eBPF counter, so this is why I am still a bit puzzle which way is right to do (bind vs separate eBPF counters). But I personally prefer to let eBPF counter to respect delay, so it's fine for me to apply Namhyung's patch.

"I'm fine" can be read as an Acked-by, right? :-)

Yes, have sent my Reviewed tag on Namhyung's patch.

Thanks,
Leo

Reviewed-by Tested-by on v1 2/2
#10 lore raw

Re: [PATCH 2/2] perf stat: fix unexpected delay behaviour

In reply to Adrián Herrera Arcila
Quoted 4 lines · Adrián Herrera Arcila

The described --delay behaviour is to delay the enablement of events, but not the execution of the command, if one is passed, which is incorrectly the current behaviour.

Quoted 8 lines

This patch decouples the enablement from the delay, and enables events before or after launching the workload dependent on the options passed by the user. This code structure is inspired by that in perf-record, and tries to be consistent with it.

Fixes d0a0a511493d ("perf stat: Fix forked applications enablement of counters")

bpf_counter() is not enabled for delay in this patch, but I think this is purposed to keep the same behaviour with before. I would leave it to Song for a call.

The patch LGTM and I tested with commands:

$ time ./perf stat --delay 2000 --quiet sleep 2
Events disabled
Events enabled

real 0m2.039s
user 0m0.007s
sys 0m0.016s

$ ./perf stat --delay 2000 --quiet echo "marking"
Events disabled
marking
Events enabled

P.s. I took a bit time to get clear how 'perf stat' set enable_on_exec flag, which is set in the function create_perf_stat_counter(), so this can enable PMU event for the case when delay is zero, and this can avoid losing PMU tracing for workload.

Reviewed-by on v1 1/2
#11 lore raw
In reply to Adrián Herrera Arcila
Quoted 7 lines · Adrián Herrera Arcila

This extracts common code from the branches of the forks if-then-else. enable_counters(), which was at the beginning of both branches of the conditional, is now unconditional; evlist__start_workload is extracted to a different if, which enables making the common clocking code unconditional.