5.4.209-rc1 review

This is the start of the stable review cycle for the 5.4.209 release. There are 34 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 03 Aug 2022 11:41:16 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.209-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.4.209-rc1

Ming Lei <[email protected]>
scsi: core: Fix race between handling STS_RESOURCE and completion

Wei Mingzhi <[email protected]>
mt7601u: add USB device ID for some versions of XiaoDu WiFi Dongle.

Greg Kroah-Hartman <[email protected]>
ARM: crypto: comment out gcc warning that breaks clang builds

Xin Long <[email protected]>
sctp: leave the err path free in sctp_stream_init to sctp_stream_free

Alejandro Lucero <[email protected]>
sfc: disable softirqs for ptp TX

Leo Yan <[email protected]>
perf symbol: Correct address for bss symbols

Jason Wang <[email protected]>
virtio-net: fix the race between refill work and close

Florian Westphal <[email protected]>
netfilter: nf_queue: do not allow packet truncation below transport header offset

Duoming Zhou <[email protected]>
sctp: fix sleep in atomic context bug in timer handlers

Michal Maloszewski <[email protected]>
i40e: Fix interface init with MSI interrupts (no MSI-X)

Kuniyuki Iwashima <[email protected]>
tcp: Fix a data-race around sysctl_tcp_comp_sack_nr.

Kuniyuki Iwashima <[email protected]>
tcp: Fix a data-race around sysctl_tcp_comp_sack_delay_ns.

Xin Long <[email protected]>
Documentation: fix sctp_wmem in ip-sysctl.rst

Kuniyuki Iwashima <[email protected]>
tcp: Fix a data-race around sysctl_tcp_invalid_ratelimit.

Kuniyuki Iwashima <[email protected]>
tcp: Fix a data-race around sysctl_tcp_autocorking.

Kuniyuki Iwashima <[email protected]>
tcp: Fix a data-race around sysctl_tcp_min_rtt_wlen.

Kuniyuki Iwashima <[email protected]>
tcp: Fix a data-race around sysctl_tcp_min_tso_segs.

Liang He <[email protected]>
net: sungem_phy: Add of_node_put() for reference returned by of_get_parent()

Kuniyuki Iwashima <[email protected]>
igmp: Fix data-races around sysctl_igmp_qrv.

Ziyang Xuan <[email protected]>
ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptr

Kuniyuki Iwashima <[email protected]>
net: ping6: Fix memleak in ipv6_renew_options().

Kuniyuki Iwashima <[email protected]>
tcp: Fix a data-race around sysctl_tcp_challenge_ack_limit.

Kuniyuki Iwashima <[email protected]>
tcp: Fix a data-race around sysctl_tcp_limit_output_bytes.

Liang He <[email protected]>
scsi: ufs: host: Hold reference returned by of_parse_phandle()

Maciej Fijalkowski <[email protected]>
ice: do not setup vlan for loopback VSI

Maciej Fijalkowski <[email protected]>
ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)

Kuniyuki Iwashima <[email protected]>
tcp: Fix a data-race around sysctl_tcp_nometrics_save.

Kuniyuki Iwashima <[email protected]>
tcp: Fix a data-race around sysctl_tcp_frto.

Kuniyuki Iwashima <[email protected]>
tcp: Fix a data-race around sysctl_tcp_adv_win_scale.

Kuniyuki Iwashima <[email protected]>
tcp: Fix a data-race around sysctl_tcp_app_win.

Kuniyuki Iwashima <[email protected]>
tcp: Fix data-races around sysctl_tcp_dsack.

Harald Freudenberger <[email protected]>
s390/archrandom: prevent CPACF trng invocations in interrupt context

ChenXiaoSong <[email protected]>
ntfs: fix use-after-free in ntfs_ucsncmp()

Luiz Augusto von Dentz <[email protected]>
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put

-------------

Diffstat:

 Documentation/networking/ip-sysctl.txt       |  9 +++-
 Makefile                                     |  4 +-
 arch/arm/lib/xor-neon.c                      |  3 +-
 arch/s390/include/asm/archrandom.h           |  9 ++--
 drivers/net/ethernet/intel/i40e/i40e_main.c  |  4 ++
 drivers/net/ethernet/intel/ice/ice_ethtool.c |  3 +-
 drivers/net/ethernet/intel/ice/ice_main.c    |  8 ++--
 drivers/net/ethernet/sfc/ptp.c               | 22 ++++++++++
 drivers/net/sungem_phy.c                     |  1 +
 drivers/net/virtio_net.c                     | 37 +++++++++++++++--
 drivers/net/wireless/mediatek/mt7601u/usb.c  |  1 +
 drivers/scsi/scsi_lib.c                      |  3 +-
 drivers/scsi/ufs/ufshcd-pltfrm.c             | 15 ++++++-
 fs/ntfs/attrib.c                             |  8 +++-
 include/net/addrconf.h                       |  3 ++
 include/net/bluetooth/l2cap.h                |  1 +
 include/net/tcp.h                            |  2 +-
 net/bluetooth/l2cap_core.c                   | 61 ++++++++++++++++++++++------
 net/ipv4/igmp.c                              | 24 ++++++-----
 net/ipv4/tcp.c                               |  2 +-
 net/ipv4/tcp_input.c                         | 20 +++++----
 net/ipv4/tcp_metrics.c                       |  2 +-
 net/ipv4/tcp_output.c                        |  4 +-
 net/ipv6/ping.c                              |  6 +++
 net/netfilter/nfnetlink_queue.c              |  7 +++-
 net/sctp/associola.c                         |  5 +--
 net/sctp/stream.c                            | 19 ++-------
 net/sctp/stream_sched.c                      |  2 +-
 tools/perf/util/symbol-elf.c                 | 45 ++++++++++++++++++--
 29 files changed, 247 insertions(+), 83 deletions(-)

From: Luiz Augusto von Dentz <[email protected]>

commit d0be8347c623e0ac4202a1d4e0373882821f56b0 upstream.

This fixes the following trace which is caused by hci_rx_work starting up *after* the final channel reference has been put() during sock_close() but *before* the references to the channel have been destroyed, so instead the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to prevent referencing a channel that is about to be destroyed.

refcount_t: increment on 0; use-after-free.

  BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0
  Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705

  CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S      W
  4.14.234-00003-g1fb6d0bd49a4-dirty #28
  Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150
  Google Inc. MSM sm8150 Flame DVT (DT)
  Workqueue: hci0 hci_rx_work
  Call trace:
   dump_backtrace+0x0/0x378
   show_stack+0x20/0x2c
   dump_stack+0x124/0x148
   print_address_description+0x80/0x2e8
   __kasan_report+0x168/0x188
   kasan_report+0x10/0x18
   __asan_load4+0x84/0x8c
   refcount_dec_and_test+0x20/0xd0
   l2cap_chan_put+0x48/0x12c
   l2cap_recv_frame+0x4770/0x6550
   l2cap_recv_acldata+0x44c/0x7a4
   hci_acldata_packet+0x100/0x188
   hci_rx_work+0x178/0x23c
   process_one_work+0x35c/0x95c
   worker_thread+0x4cc/0x960
   kthread+0x1a8/0x1c4
   ret_from_fork+0x10/0x18

---
 include/net/bluetooth/l2cap.h |    1 
 net/bluetooth/l2cap_core.c    |   61 +++++++++++++++++++++++++++++++++---------
 2 files changed, 49 insertions(+), 13 deletions(-)

@@ -802,6 +802,7 @@ enum {
 };
 
 void l2cap_chan_hold(struct l2cap_chan *c);
+struct l2cap_chan *l2cap_chan_hold_unless_zero(struct l2cap_chan *c);
 void l2cap_chan_put(struct l2cap_chan *c);
 
 static inline void l2cap_chan_lock(struct l2cap_chan *chan)

From: ChenXiaoSong <[email protected]>

commit 38c9c22a85aeed28d0831f230136e9cf6fa2ed44 upstream.

Syzkaller reported use-after-free bug as follows:

==================================================================

BUG: KASAN: use-after-free in ntfs_ucsncmp+0x123/0x130
Read of size 2 at addr ffff8880751acee8 by task a.out/879

CPU: 7 PID: 879 Comm: a.out Not tainted 5.19.0-rc4-next-20220630-00001-gcc5218c8bd2c-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x1c0/0x2b0
 print_address_description.constprop.0.cold+0xd4/0x484
 print_report.cold+0x55/0x232
 kasan_report+0xbf/0xf0
 ntfs_ucsncmp+0x123/0x130
 ntfs_are_names_equal.cold+0x2b/0x41
 ntfs_attr_find+0x43b/0xb90
 ntfs_attr_lookup+0x16d/0x1e0
 ntfs_read_locked_attr_inode+0x4aa/0x2360
 ntfs_attr_iget+0x1af/0x220
 ntfs_read_locked_inode+0x246c/0x5120
 ntfs_iget+0x132/0x180
 load_system_files+0x1cc6/0x3480
 ntfs_fill_super+0xa66/0x1cf0
 mount_bdev+0x38d/0x460
 legacy_get_tree+0x10d/0x220
 vfs_get_tree+0x93/0x300
 do_new_mount+0x2da/0x6d0
 path_mount+0x496/0x19d0
 __x64_sys_mount+0x284/0x300
 do_syscall_64+0x3b/0xc0
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f3f2118d9ea
Code: 48 8b 0d a9 f4 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 76 f4 0b 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc269deac8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3f2118d9ea
RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffc269dec00
RBP: 00007ffc269dec80 R08: 00007ffc269deb00 R09: 00007ffc269dec44
R10: 0000000000000000 R11: 0000000000000202 R12: 000055f81ab1d220
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>

The buggy address belongs to the physical page:
page:0000000085430378 refcount:1 mapcount:1 mapping:0000000000000000 index:0x555c6a81d pfn:0x751ac
memcg:ffff888101f7e180
anon flags: 0xfffffc00a0014(uptodate|lru|mappedtodisk|swapbacked|node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc00a0014 ffffea0001bf2988 ffffea0001de2448 ffff88801712e201
raw: 0000000555c6a81d 0000000000000000 0000000100000000 ffff888101f7e180
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880751acd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8880751ace00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880751ace80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
                                                          ^
 ffff8880751acf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8880751acf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

The reason is that struct ATTR_RECORD->name_offset is 6485, end address of name string is out of bounds.

Fix this by adding sanity check on end address of attribute name string.

---
 fs/ntfs/attrib.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

@@ -592,8 +592,12 @@ static int ntfs_attr_find(const ATTR_TYP
 		a = (ATTR_RECORD*)((u8*)ctx->attr +
 				le32_to_cpu(ctx->attr->length));
 	for (;;	a = (ATTR_RECORD*)((u8*)a + le32_to_cpu(a->length))) {
-		if ((u8*)a < (u8*)ctx->mrec || (u8*)a > (u8*)ctx->mrec +
-				le32_to_cpu(ctx->mrec->bytes_allocated))
+		u8 *mrec_end = (u8 *)ctx->mrec +
+		               le32_to_cpu(ctx->mrec->bytes_allocated);
+		u8 *name_end = (u8 *)a + le16_to_cpu(a->name_offset) +
+			       a->name_length * sizeof(ntfschar);
+		if ((u8*)a < (u8*)ctx->mrec || (u8*)a > mrec_end ||
+		    name_end > mrec_end)
 			break;
 		ctx->attr = a;
 		if (unlikely(le32_to_cpu(a->type) > le32_to_cpu(type) ||

From: Harald Freudenberger <[email protected]>

commit 918e75f77af7d2e049bb70469ec0a2c12782d96a upstream.

This patch slightly reworks the s390 arch_get_random_seed_{int,long}
implementation: Make sure the CPACF trng instruction is never called in any interrupt context. This is done by adding an additional condition in_task().

Justification:

There are some constrains to satisfy for the invocation of the arch_get_random_seed_{int,long}() functions:
- They should provide good random data during kernel initialization.
- They should not be called in interrupt context as the TRNG instruction is relatively heavy weight and may for example make some network loads cause to timeout and buck.

However, it was not clear what kind of interrupt context is exactly encountered during kernel init or network traffic eventually calling arch_get_random_seed_long().

After some days of investigations it is clear that the s390 start_kernel function is not running in any interrupt context and so the trng is called:

Jul 11 18:33:39 t35lp54 kernel:  [<00000001064e90ca>] arch_get_random_seed_long.part.0+0x32/0x70
Jul 11 18:33:39 t35lp54 kernel:  [<000000010715f246>] random_init+0xf6/0x238
Jul 11 18:33:39 t35lp54 kernel:  [<000000010712545c>] start_kernel+0x4a4/0x628
Jul 11 18:33:39 t35lp54 kernel:  [<000000010590402a>] startup_continue+0x2a/0x40

The condition in_task() is true and the CPACF trng provides random data during kernel startup.

The network traffic however, is more difficult. A typical call stack looks like this:

Jul 06 17:37:07 t35lp54 kernel:  [<000000008b5600fc>] extract_entropy.constprop.0+0x23c/0x240
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b560136>] crng_reseed+0x36/0xd8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b5604b8>] crng_make_state+0x78/0x340
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b5607e0>] _get_random_bytes+0x60/0xf8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b56108a>] get_random_u32+0xda/0x248
Jul 06 17:37:07 t35lp54 kernel:  [<000000008aefe7a8>] kfence_guarded_alloc+0x48/0x4b8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008aeff35e>] __kfence_alloc+0x18e/0x1b8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008aef7f10>] __kmalloc_node_track_caller+0x368/0x4d8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b611eac>] kmalloc_reserve+0x44/0xa0
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b611f98>] __alloc_skb+0x90/0x178
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b6120dc>] __napi_alloc_skb+0x5c/0x118
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b8f06b4>] qeth_extract_skb+0x13c/0x680
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b8f6526>] qeth_poll+0x256/0x3f8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b63d76e>] __napi_poll.constprop.0+0x46/0x2f8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b63dbec>] net_rx_action+0x1cc/0x408
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b937302>] __do_softirq+0x132/0x6b0
Jul 06 17:37:07 t35lp54 kernel:  [<000000008abf46ce>] __irq_exit_rcu+0x13e/0x170
Jul 06 17:37:07 t35lp54 kernel:  [<000000008abf531a>] irq_exit_rcu+0x22/0x50
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b922506>] do_io_irq+0xe6/0x198
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b935826>] io_int_handler+0xd6/0x110
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b9358a6>] psw_idle_exit+0x0/0xa
Jul 06 17:37:07 t35lp54 kernel: ([<000000008ab9c59a>] arch_cpu_idle+0x52/0xe0)
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b933cfe>] default_idle_call+0x6e/0xd0
Jul 06 17:37:07 t35lp54 kernel:  [<000000008ac59f4e>] do_idle+0xf6/0x1b0
Jul 06 17:37:07 t35lp54 kernel:  [<000000008ac5a28e>] cpu_startup_entry+0x36/0x40
Jul 06 17:37:07 t35lp54 kernel:  [<000000008abb0d90>] smp_start_secondary+0x148/0x158
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b935b9e>] restart_int_handler+0x6e/0x90

which confirms that the call is in softirq context. So in_task() covers exactly the cases where we want to have CPACF trng called: not in nmi, not in hard irq, not in soft irq but in normal task context and during kernel init.

---
 arch/s390/include/asm/archrandom.h |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

@@ -2,7 +2,7 @@
 /*
  * Kernel interface for the s390 arch_random_* functions
  *
- * Copyright IBM Corp. 2017, 2020
+ * Copyright IBM Corp. 2017, 2022
  *
  * Author: Harald Freudenberger <[email protected]>
  *

@@ -14,6 +14,7 @@
 #ifdef CONFIG_ARCH_RANDOM
 
 #include <linux/static_key.h>
+#include <linux/preempt.h>
 #include <linux/atomic.h>
 #include <asm/cpacf.h>
 

@@ -32,7 +33,8 @@ static inline bool __must_check arch_get
 
 static inline bool __must_check arch_get_random_seed_long(unsigned long *v)
 {
-	if (static_branch_likely(&s390_arch_random_available)) {
+	if (static_branch_likely(&s390_arch_random_available) &&
+	    in_task()) {
 		cpacf_trng(NULL, 0, (u8 *)v, sizeof(*v));
 		atomic64_add(sizeof(*v), &s390_arch_random_counter);
 		return true;

@@ -42,7 +44,8 @@ static inline bool __must_check arch_get
 
 static inline bool __must_check arch_get_random_seed_int(unsigned int *v)
 {
-	if (static_branch_likely(&s390_arch_random_available)) {
+	if (static_branch_likely(&s390_arch_random_available) &&
+	    in_task()) {
 		cpacf_trng(NULL, 0, (u8 *)v, sizeof(*v));
 		atomic64_add(sizeof(*v), &s390_arch_random_counter);
 		return true;

From: Kuniyuki Iwashima <[email protected]>

commit 58ebb1c8b35a8ef38cd6927431e0fa7b173a632d upstream.

While reading sysctl_tcp_dsack, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers.

---
 net/ipv4/tcp_input.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -4260,7 +4260,7 @@ static void tcp_dsack_set(struct sock *s
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 
-	if (tcp_is_sack(tp) && sock_net(sk)->ipv4.sysctl_tcp_dsack) {
+	if (tcp_is_sack(tp) && READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_dsack)) {
 		int mib_idx;
 
 		if (before(seq, tp->rcv_nxt))

@@ -4306,7 +4306,7 @@ static void tcp_send_dupack(struct sock
 		NET_INC_STATS(sock_net(sk), LINUX_MIB_DELAYEDACKLOST);
 		tcp_enter_quickack_mode(sk, TCP_MAX_QUICKACKS);
 
-		if (tcp_is_sack(tp) && sock_net(sk)->ipv4.sysctl_tcp_dsack) {
+		if (tcp_is_sack(tp) && READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_dsack)) {
 			u32 end_seq = TCP_SKB_CB(skb)->end_seq;
 
 			tcp_rcv_spurious_retrans(sk, skb);

From: Kuniyuki Iwashima <[email protected]>

commit 02ca527ac5581cf56749db9fd03d854e842253dd upstream.

While reading sysctl_tcp_app_win, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

---
 net/ipv4/tcp_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -439,7 +439,7 @@ static void tcp_grow_window(struct sock
  */
 void tcp_init_buffer_space(struct sock *sk)
 {
-	int tcp_app_win = sock_net(sk)->ipv4.sysctl_tcp_app_win;
+	int tcp_app_win = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_app_win);
 	struct tcp_sock *tp = tcp_sk(sk);
 	int maxwin;
 

From: Kuniyuki Iwashima <[email protected]>

commit 36eeee75ef0157e42fb6593dcc65daab289b559e upstream.

While reading sysctl_tcp_adv_win_scale, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

---
 include/net/tcp.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1389,7 +1389,7 @@ void tcp_select_initial_window(const str
 
 static inline int tcp_win_from_space(const struct sock *sk, int space)
 {
-	int tcp_adv_win_scale = sock_net(sk)->ipv4.sysctl_tcp_adv_win_scale;
+	int tcp_adv_win_scale = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_adv_win_scale);
 
 	return tcp_adv_win_scale <= 0 ?
 		(space>>(-tcp_adv_win_scale)) :

From: Kuniyuki Iwashima <[email protected]>

commit 706c6202a3589f290e1ef9be0584a8f4a3cc0507 upstream.

While reading sysctl_tcp_frto, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

---
 net/ipv4/tcp_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -2030,7 +2030,7 @@ void tcp_enter_loss(struct sock *sk)
 	 * loss recovery is underway except recurring timeout(s) on
 	 * the same SND.UNA (sec 3.2). Disable F-RTO on path MTU probing
 	 */
-	tp->frto = net->ipv4.sysctl_tcp_frto &&
+	tp->frto = READ_ONCE(net->ipv4.sysctl_tcp_frto) &&
 		   (new_recovery || icsk->icsk_retransmits) &&
 		   !inet_csk(sk)->icsk_mtup.probe_size;
 }

From: Kuniyuki Iwashima <[email protected]>

commit 8499a2454d9e8a55ce616ede9f9580f36fd5b0f3 upstream.

While reading sysctl_tcp_nometrics_save, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

---
 net/ipv4/tcp_metrics.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -329,7 +329,7 @@ void tcp_update_metrics(struct sock *sk)
 	int m;
 
 	sk_dst_confirm(sk);
-	if (net->ipv4.sysctl_tcp_nometrics_save || !dst)
+	if (READ_ONCE(net->ipv4.sysctl_tcp_nometrics_save) || !dst)
 		return;
 
 	rcu_read_lock();

From: Maciej Fijalkowski <[email protected]>

commit 283d736ff7c7e96ac5b32c6c0de40372f8eb171e upstream.

Tx side sets EOP and RS bits on descriptors to indicate that a particular descriptor is the last one and needs to generate an irq when it was sent. These bits should not be checked on completion path regardless whether it's the Tx or the Rx. DD bit serves this purpose and it indicates that a particular descriptor is either for Rx or was successfully Txed. EOF is also set as loopback test does not xmit fragmented frames.

Look at (DD | EOF) bits setting in ice_lbtest_receive_frames() instead of EOP and RS pair.

---
 drivers/net/ethernet/intel/ice/ice_ethtool.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -619,7 +619,8 @@ static int ice_lbtest_receive_frames(str
 		rx_desc = ICE_RX_DESC(rx_ring, i);
 
 		if (!(rx_desc->wb.status_error0 &
-		    cpu_to_le16(ICE_TX_DESC_CMD_EOP | ICE_TX_DESC_CMD_RS)))
+		    (cpu_to_le16(BIT(ICE_RX_FLEX_DESC_STATUS0_DD_S)) |
+		     cpu_to_le16(BIT(ICE_RX_FLEX_DESC_STATUS0_EOF_S)))))
 			continue;
 
 		rx_buf = &rx_ring->rx_buf[i];

From: Maciej Fijalkowski <[email protected]>

commit cc019545a238518fa9da1e2a889f6e1bb1005a63 upstream.

Currently loopback test is failiing due to the error returned from ice_vsi_vlan_setup(). Skip calling it when preparing loopback VSI.

---
 drivers/net/ethernet/intel/ice/ice_main.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

@@ -3495,10 +3495,12 @@ int ice_vsi_cfg(struct ice_vsi *vsi)
 	if (vsi->netdev) {
 		ice_set_rx_mode(vsi->netdev);
 
-		err = ice_vsi_vlan_setup(vsi);
+		if (vsi->type != ICE_VSI_LB) {
+			err = ice_vsi_vlan_setup(vsi);
 
-		if (err)
-			return err;
+			if (err)
+				return err;
+		}
 	}
 	ice_vsi_cfg_dcb_rings(vsi);
 

From: Liang He <[email protected]>

commit a3435afba87dc6cd83f5595e7607f3c40f93ef01 upstream.

In ufshcd_populate_vreg(), we should hold the reference returned by of_parse_phandle() and then use it to call of_node_put() for refcount balance.

---
 drivers/scsi/ufs/ufshcd-pltfrm.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

@@ -125,9 +125,20 @@ out:
 	return ret;
 }
 
+static bool phandle_exists(const struct device_node *np,
+			   const char *phandle_name, int index)
+{
+	struct device_node *parse_np = of_parse_phandle(np, phandle_name, index);
+
+	if (parse_np)
+		of_node_put(parse_np);
+
+	return parse_np != NULL;
+}
+
 #define MAX_PROP_SIZE 32
 static int ufshcd_populate_vreg(struct device *dev, const char *name,
-		struct ufs_vreg **out_vreg)
+				struct ufs_vreg **out_vreg)
 {
 	int ret = 0;
 	char prop_name[MAX_PROP_SIZE];

@@ -140,7 +151,7 @@ static int ufshcd_populate_vreg(struct d
 	}
 
 	snprintf(prop_name, MAX_PROP_SIZE, "%s-supply", name);
-	if (!of_parse_phandle(np, prop_name, 0)) {
+	if (!phandle_exists(np, prop_name, 0)) {
 		dev_info(dev, "%s: Unable to find %s regulator, assuming enabled\n",
 				__func__, prop_name);
 		goto out;

From: Kuniyuki Iwashima <[email protected]>

commit 9fb90193fbd66b4c5409ef729fd081861f8b6351 upstream.

While reading sysctl_tcp_limit_output_bytes, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

---
 net/ipv4/tcp_output.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -2276,7 +2276,7 @@ static bool tcp_small_queue_check(struct
 		      sk->sk_pacing_rate >> READ_ONCE(sk->sk_pacing_shift));
 	if (sk->sk_pacing_status == SK_PACING_NONE)
 		limit = min_t(unsigned long, limit,
-			      sock_net(sk)->ipv4.sysctl_tcp_limit_output_bytes);
+			      READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_limit_output_bytes));
 	limit <<= factor;
 
 	if (static_branch_unlikely(&tcp_tx_delay_enabled) &&

From: Kuniyuki Iwashima <[email protected]>

commit db3815a2fa691da145cfbe834584f31ad75df9ff upstream.

While reading sysctl_tcp_challenge_ack_limit, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

---
 net/ipv4/tcp_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -3484,7 +3484,7 @@ static void tcp_send_challenge_ack(struc
 	/* Then check host-wide RFC 5961 rate limit. */
 	now = jiffies / HZ;
 	if (now != challenge_timestamp) {
-		u32 ack_limit = net->ipv4.sysctl_tcp_challenge_ack_limit;
+		u32 ack_limit = READ_ONCE(net->ipv4.sysctl_tcp_challenge_ack_limit);
 		u32 half = (ack_limit + 1) >> 1;
 
 		challenge_timestamp = now;

From: Kuniyuki Iwashima <[email protected]>

commit e27326009a3d247b831eda38878c777f6f4eb3d1 upstream.

When we close ping6 sockets, some resources are left unfreed because pingv6_prot is missing sk->sk_prot->destroy(). As reported by syzbot [0], just three syscalls leak 96 bytes and easily cause OOM.

    struct ipv6_sr_hdr *hdr;
    char data[24] = {0};
    int fd;

    hdr = (struct ipv6_sr_hdr *)data;
    hdr->hdrlen = 2;
    hdr->type = IPV6_SRCRT_TYPE_4;

    fd = socket(AF_INET6, SOCK_DGRAM, NEXTHDR_ICMP);
    setsockopt(fd, IPPROTO_IPV6, IPV6_RTHDR, data, 24);
    close(fd);

To fix memory leaks, let's add a destroy function.

Note the socket() syscall checks if the GID is within the range of net.ipv4.ping_group_range. The default value is [1, 0] so that no GID meets the condition (1 <= GID <= 0). Thus, the local DoS does not succeed until we change the default value. However, at least Ubuntu/Fedora/RHEL loosen it.

    $ cat /usr/lib/sysctl.d/50-default.conf
    ...
    -net.ipv4.ping_group_range = 0 2147483647

Also, there could be another path reported with these options, and some of them require CAP_NET_RAW.

setsockopt

      IPV6_ADDRFORM (inet6_sk(sk)->pktoptions)
      IPV6_RECVPATHMTU (inet6_sk(sk)->rxpmtu)
      IPV6_HOPOPTS (inet6_sk(sk)->opt)
      IPV6_RTHDRDSTOPTS (inet6_sk(sk)->opt)
      IPV6_RTHDR (inet6_sk(sk)->opt)
      IPV6_DSTOPTS (inet6_sk(sk)->opt)
      IPV6_2292PKTOPTIONS (inet6_sk(sk)->opt)

getsockopt

      IPV6_FLOWLABEL_MGR (inet6_sk(sk)->ipv6_fl_list)

For the record, I left a different splat with syzbot's one.

unreferenced object 0xffff888006270c60 (size 96):

    comm "repro2", pid 231, jiffies 4294696626 (age 13.118s)
    hex dump (first 32 bytes):
      01 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00  ....D...........
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<00000000f6bc7ea9>] sock_kmalloc (net/core/sock.c:2564 net/core/sock.c:2554)
      [<000000006d699550>] do_ipv6_setsockopt.constprop.0 (net/ipv6/ipv6_sockglue.c:715)
      [<00000000c3c3b1f5>] ipv6_setsockopt (net/ipv6/ipv6_sockglue.c:1024)
      [<000000007096a025>] __sys_setsockopt (net/socket.c:2254)
      [<000000003a8ff47b>] __x64_sys_setsockopt (net/socket.c:2265 net/socket.c:2262 net/socket.c:2262)
      [<000000007c409dcb>] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
      [<00000000e939c4a9>] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

[0]: https://syzkaller.appspot.com/bug?extid=a8430774139ec3ab7176

---
 net/ipv6/ping.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -22,6 +22,11 @@
 #include <linux/proc_fs.h>
 #include <net/ping.h>
 
+static void ping_v6_destroy(struct sock *sk)
+{
+	inet6_destroy_sock(sk);
+}
+
 /* Compatibility glue so we can support IPv6 when it's compiled as a module */
 static int dummy_ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len,
 				 int *addr_len)

@@ -165,6 +170,7 @@ struct proto pingv6_prot = {
 	.owner =	THIS_MODULE,
 	.init =		ping_init_sock,
 	.close =	ping_close,
+	.destroy =	ping_v6_destroy,
 	.connect =	ip6_datagram_connect_v6_only,
 	.disconnect =	__udp_disconnect,
 	.setsockopt =	ipv6_setsockopt,

From: Ziyang Xuan <[email protected]>

commit 85f0173df35e5462d89947135a6a5599c6c3ef6f upstream.

Change net device's MTU to smaller than IPV6_MIN_MTU or unregister device while matching route. That may trigger null-ptr-deref bug for ip6_ptr probability as following.

=========================================================

BUG: KASAN: null-ptr-deref in find_match.part.0+0x70/0x134
Read of size 4 at addr 0000000000000308 by task ping6/263

CPU: 2 PID: 263 Comm: ping6 Not tainted 5.19.0-rc7+ #14
Call trace:
 dump_backtrace+0x1a8/0x230
 show_stack+0x20/0x70
 dump_stack_lvl+0x68/0x84
 print_report+0xc4/0x120
 kasan_report+0x84/0x120
 __asan_load4+0x94/0xd0
 find_match.part.0+0x70/0x134
 __find_rr_leaf+0x408/0x470
 fib6_table_lookup+0x264/0x540
 ip6_pol_route+0xf4/0x260
 ip6_pol_route_output+0x58/0x70
 fib6_rule_lookup+0x1a8/0x330
 ip6_route_output_flags_noref+0xd8/0x1a0
 ip6_route_output_flags+0x58/0x160
 ip6_dst_lookup_tail+0x5b4/0x85c
 ip6_dst_lookup_flow+0x98/0x120
 rawv6_sendmsg+0x49c/0xc70
 inet_sendmsg+0x68/0x94

Reproducer as following:
Firstly, prepare conditions:
$ip netns add ns1
$ip netns add ns2
$ip link add veth1 type veth peer name veth2
$ip link set veth1 netns ns1
$ip link set veth2 netns ns2
$ip netns exec ns1 ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1 $ip netns exec ns2 ip -6 addr add 2001:0db8:0:f101::2/64 dev veth2 $ip netns exec ns1 ifconfig veth1 up
$ip netns exec ns2 ifconfig veth2 up
$ip netns exec ns1 ip -6 route add 2000::/64 dev veth1 metric 1 $ip netns exec ns2 ip -6 route add 2001::/64 dev veth2 metric 1

Secondly, execute the following two commands in two ssh windows
respectively:
$ip netns exec ns1 sh
$while true; do ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1; ip -6 route add 2000::/64 dev veth1 metric 1; ping6 2000::2; done

$ip netns exec ns1 sh
$while true; do ip link set veth1 mtu 1000; ip link set veth1 mtu 1500; sleep 5; done

It is because ip6_ptr has been assigned to NULL in addrconf_ifdown() firstly, then ip6_ignore_linkdown() accesses ip6_ptr directly without NULL check.

	cpu0			cpu1
fib6_table_lookup
__find_rr_leaf
			addrconf_notify [ NETDEV_CHANGEMTU ]
			addrconf_ifdown
			RCU_INIT_POINTER(dev->ip6_ptr, NULL)

find_match
ip6_ignore_linkdown

So we can add NULL check for ip6_ptr before using in ip6_ignore_linkdown() to fix the null-ptr-deref bug.

---
 include/net/addrconf.h |    3 +++
 1 file changed, 3 insertions(+)

@@ -399,6 +399,9 @@ static inline bool ip6_ignore_linkdown(c
 {
 	const struct inet6_dev *idev = __in6_dev_get(dev);
 
+	if (unlikely(!idev))
+		return true;
+
 	return !!idev->cnf.ignore_routes_with_linkdown;
 }
 

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 8ebcc62c738f68688ee7c6fec2efe5bc6d3d7e60 ]

While reading sysctl_igmp_qrv, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers.

This test can be packed into a helper, so such changes will be in the follow-up series after net is merged into net-next.

  qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);

---
 net/ipv4/igmp.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

index 660b41040c77..1023f881091e 100644
@@ -829,7 +829,7 @@ static void igmp_ifc_event(struct in_device *in_dev)
 	struct net *net = dev_net(in_dev->dev);
 	if (IGMP_V1_SEEN(in_dev) || IGMP_V2_SEEN(in_dev))
 		return;
-	WRITE_ONCE(in_dev->mr_ifc_count, in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv);
+	WRITE_ONCE(in_dev->mr_ifc_count, in_dev->mr_qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv));
 	igmp_ifc_start_timer(in_dev, 1);
 }
 

@@ -1011,7 +1011,7 @@ static bool igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
 		 * received value was zero, use the default or statically
 		 * configured value.
 		 */
-		in_dev->mr_qrv = ih3->qrv ?: net->ipv4.sysctl_igmp_qrv;
+		in_dev->mr_qrv = ih3->qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 		in_dev->mr_qi = IGMPV3_QQIC(ih3->qqic)*HZ ?: IGMP_QUERY_INTERVAL;
 
 		/* RFC3376, 8.3. Query Response Interval:

@@ -1191,7 +1191,7 @@ static void igmpv3_add_delrec(struct in_device *in_dev, struct ip_mc_list *im,
 	pmc->interface = im->interface;
 	in_dev_hold(in_dev);
 	pmc->multiaddr = im->multiaddr;
-	pmc->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+	pmc->crcount = in_dev->mr_qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 	pmc->sfmode = im->sfmode;
 	if (pmc->sfmode == MCAST_INCLUDE) {
 		struct ip_sf_list *psf;

@@ -1242,9 +1242,11 @@ static void igmpv3_del_delrec(struct in_device *in_dev, struct ip_mc_list *im)
 			swap(im->tomb, pmc->tomb);
 			swap(im->sources, pmc->sources);
 			for (psf = im->sources; psf; psf = psf->sf_next)
-				psf->sf_crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+				psf->sf_crcount = in_dev->mr_qrv ?:
+					READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 		} else {
-			im->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+			im->crcount = in_dev->mr_qrv ?:
+				READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 		}
 		in_dev_put(pmc->interface);
 		kfree_pmc(pmc);

@@ -1351,7 +1353,7 @@ static void igmp_group_added(struct ip_mc_list *im)
 	if (in_dev->dead)
 		return;
 
-	im->unsolicit_count = net->ipv4.sysctl_igmp_qrv;
+	im->unsolicit_count = READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 	if (IGMP_V1_SEEN(in_dev) || IGMP_V2_SEEN(in_dev)) {
 		spin_lock_bh(&im->lock);
 		igmp_start_timer(im, IGMP_INITIAL_REPORT_DELAY);

@@ -1365,7 +1367,7 @@ static void igmp_group_added(struct ip_mc_list *im)
 	 * IN() to IN(A).
 	 */
 	if (im->sfmode == MCAST_EXCLUDE)
-		im->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+		im->crcount = in_dev->mr_qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 
 	igmp_ifc_event(in_dev);
 #endif

@@ -1756,7 +1758,7 @@ static void ip_mc_reset(struct in_device *in_dev)
 
 	in_dev->mr_qi = IGMP_QUERY_INTERVAL;
 	in_dev->mr_qri = IGMP_QUERY_RESPONSE_INTERVAL;
-	in_dev->mr_qrv = net->ipv4.sysctl_igmp_qrv;
+	in_dev->mr_qrv = READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 }
 #else
 static void ip_mc_reset(struct in_device *in_dev)

@@ -1890,7 +1892,7 @@ static int ip_mc_del1_src(struct ip_mc_list *pmc, int sfmode,
 #ifdef CONFIG_IP_MULTICAST
 		if (psf->sf_oldin &&
 		    !IGMP_V1_SEEN(in_dev) && !IGMP_V2_SEEN(in_dev)) {
-			psf->sf_crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+			psf->sf_crcount = in_dev->mr_qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 			psf->sf_next = pmc->tomb;
 			pmc->tomb = psf;
 			rv = 1;

@@ -1954,7 +1956,7 @@ static int ip_mc_del_src(struct in_device *in_dev, __be32 *pmca, int sfmode,
 		/* filter mode change */
 		pmc->sfmode = MCAST_INCLUDE;
 #ifdef CONFIG_IP_MULTICAST
-		pmc->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+		pmc->crcount = in_dev->mr_qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 		WRITE_ONCE(in_dev->mr_ifc_count, pmc->crcount);
 		for (psf = pmc->sources; psf; psf = psf->sf_next)
 			psf->sf_crcount = 0;

@@ -2133,7 +2135,7 @@ static int ip_mc_add_src(struct in_device *in_dev, __be32 *pmca, int sfmode,
 #ifdef CONFIG_IP_MULTICAST
 		/* else no filters; keep old mode for reports */
 
-		pmc->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+		pmc->crcount = in_dev->mr_qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 		WRITE_ONCE(in_dev->mr_ifc_count, pmc->crcount);
 		for (psf = pmc->sources; psf; psf = psf->sf_next)
 			psf->sf_crcount = 0;

2.35.1

From: Liang He <[email protected]>

[ Upstream commit ebbbe23fdf6070e31509638df3321688358cc211 ]

In bcm5421_init(), we should call of_node_put() for the reference returned by of_get_parent() which has increased the refcount.

---
 drivers/net/sungem_phy.c | 1 +
 1 file changed, 1 insertion(+)

index 291fa449993f..45f295403cb5 100644
@@ -454,6 +454,7 @@ static int bcm5421_init(struct mii_phy* phy)
 		int can_low_power = 1;
 		if (np == NULL || of_get_property(np, "no-autolowpower", NULL))
 			can_low_power = 0;
+		of_node_put(np);
 		if (can_low_power) {
 			/* Enable automatic low-power */
 			sungem_phy_write(phy, 0x1c, 0x9002);

2.35.1

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit e0bb4ab9dfddd872622239f49fb2bd403b70853b ]

While reading sysctl_tcp_min_tso_segs, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

---
 net/ipv4/tcp_output.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 99e077422975..ef749a47768a 100644
@@ -1761,7 +1761,7 @@ static u32 tcp_tso_segs(struct sock *sk, unsigned int mss_now)
 
 	min_tso = ca_ops->min_tso_segs ?
 			ca_ops->min_tso_segs(sk) :
-			sock_net(sk)->ipv4.sysctl_tcp_min_tso_segs;
+			READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_min_tso_segs);
 
 	tso_segs = tcp_tso_autosize(sk, mss_now, min_tso);
 	return min_t(u32, tso_segs, sk->sk_gso_max_segs);

2.35.1

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 1330ffacd05fc9ac4159d19286ce119e22450ed2 ]

While reading sysctl_tcp_min_rtt_wlen, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

---
 net/ipv4/tcp_input.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index a8d8ff488281..b760ad0b16d9 100644
@@ -2914,7 +2914,7 @@ static void tcp_fastretrans_alert(struct sock *sk, const u32 prior_snd_una,
 
 static void tcp_update_rtt_min(struct sock *sk, u32 rtt_us, const int flag)
 {
-	u32 wlen = sock_net(sk)->ipv4.sysctl_tcp_min_rtt_wlen * HZ;
+	u32 wlen = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_min_rtt_wlen) * HZ;
 	struct tcp_sock *tp = tcp_sk(sk);
 
 	if ((flag & FLAG_ACK_MAYBE_DELAYED) && rtt_us > tcp_min_rtt(tp)) {

2.35.1

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 85225e6f0a76e6745bc841c9f25169c509b573d8 ]

While reading sysctl_tcp_autocorking, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

---
 net/ipv4/tcp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 4b31f6e9ec61..0a570d5d0b38 100644
@@ -697,7 +697,7 @@ static bool tcp_should_autocork(struct sock *sk, struct sk_buff *skb,
 				int size_goal)
 {
 	return skb->len < size_goal &&
-	       sock_net(sk)->ipv4.sysctl_tcp_autocorking &&
+	       READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_autocorking) &&
 	       !tcp_rtx_queue_empty(sk) &&
 	       refcount_read(&sk->sk_wmem_alloc) > skb->truesize;
 }

2.35.1

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 2afdbe7b8de84c28e219073a6661080e1b3ded48 ]

While reading sysctl_tcp_invalid_ratelimit, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

---
 net/ipv4/tcp_input.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index b760ad0b16d9..7af5e6acf41a 100644
@@ -3436,7 +3436,8 @@ static bool __tcp_oow_rate_limited(struct net *net, int mib_idx,
 	if (*last_oow_ack_time) {
 		s32 elapsed = (s32)(tcp_jiffies32 - *last_oow_ack_time);
 
-		if (0 <= elapsed && elapsed < net->ipv4.sysctl_tcp_invalid_ratelimit) {
+		if (0 <= elapsed &&
+		    elapsed < READ_ONCE(net->ipv4.sysctl_tcp_invalid_ratelimit)) {
 			NET_INC_STATS(net, mib_idx);
 			return true;	/* rate-limited: don't send yet! */
 		}

2.35.1

From: Xin Long <[email protected]>

[ Upstream commit aa709da0e032cee7c202047ecd75f437bb0126ed ]

Since commit 1033990ac5b2 ("sctp: implement memory accounting on tx path"), SCTP has supported memory accounting on tx path where 'sctp_wmem' is used by sk_wmem_schedule(). So we should fix the description for this option in ip-sysctl.rst accordingly.

v1->v2:
- Improve the description as Marcelo suggested.

---
 Documentation/networking/ip-sysctl.txt | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

index 787a9c077ef1..5cf601c94e35 100644
@@ -2284,7 +2284,14 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 	Default: 4K
 
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
-	Currently this tunable has no effect.
+	Only the first value ("min") is used, "default" and "max" are
+	ignored.
+
+	min: Minimum size of send buffer that can be used by SCTP sockets.
+	It is guaranteed to each SCTP socket (but not association) even
+	under moderate memory pressure.
+
+	Default: 4K
 
 addr_scope_policy - INTEGER
 	Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00

2.35.1

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 4866b2b0f7672b6d760c4b8ece6fb56f965dcc8a ]

While reading sysctl_tcp_comp_sack_delay_ns, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

---
 net/ipv4/tcp_input.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index 7af5e6acf41a..f8fa036cfae2 100644
@@ -5326,7 +5326,8 @@ static void __tcp_ack_snd_check(struct sock *sk, int ofo_possible)
 	if (tp->srtt_us && tp->srtt_us < rtt)
 		rtt = tp->srtt_us;
 
-	delay = min_t(unsigned long, sock_net(sk)->ipv4.sysctl_tcp_comp_sack_delay_ns,
+	delay = min_t(unsigned long,
+		      READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_comp_sack_delay_ns),
 		      rtt * (NSEC_PER_USEC >> 3)/20);
 	sock_hold(sk);
 	hrtimer_start(&tp->compressed_ack_timer, ns_to_ktime(delay),

2.35.1

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 79f55473bfc8ac51bd6572929a679eeb4da22251 ]

While reading sysctl_tcp_comp_sack_nr, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

---
 net/ipv4/tcp_input.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index f8fa036cfae2..f4e00ff909da 100644
@@ -5303,7 +5303,7 @@ static void __tcp_ack_snd_check(struct sock *sk, int ofo_possible)
 	}
 
 	if (!tcp_is_sack(tp) ||
-	    tp->compressed_ack >= sock_net(sk)->ipv4.sysctl_tcp_comp_sack_nr)
+	    tp->compressed_ack >= READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_comp_sack_nr))
 		goto send_now;
 
 	if (tp->compressed_ack_rcv_nxt != tp->rcv_nxt) {

2.35.1

From: Michal Maloszewski <[email protected]>

[ Upstream commit 5fcbb711024aac6d4db385623e6f2fdf019f7782 ]

Fix the inability to bring an interface up on a setup with only MSI interrupts enabled (no MSI-X).
Solution is to add a default number of QPs = 1. This is enough, since without MSI-X support driver enables only a basic feature set.

---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ++++
 1 file changed, 4 insertions(+)

index 0610d344fdbf..637f6ed78b48 100644
@@ -1821,11 +1821,15 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 		 * non-zero req_queue_pairs says that user requested a new
 		 * queue count via ethtool's set_channels, so use this
 		 * value for queues distribution across traffic classes
+		 * We need at least one queue pair for the interface
+		 * to be usable as we see in else statement.
 		 */
 		if (vsi->req_queue_pairs > 0)
 			vsi->num_queue_pairs = vsi->req_queue_pairs;
 		else if (pf->flags & I40E_FLAG_MSIX_ENABLED)
 			vsi->num_queue_pairs = pf->num_lan_msix;
+		else
+			vsi->num_queue_pairs = 1;
 	}
 
 	/* Number of queues per enabled TC */

2.35.1

From: Duoming Zhou <[email protected]>

[ Upstream commit b89fc26f741d9f9efb51cba3e9b241cf1380ec5a ]

There are sleep in atomic context bugs in timer handlers of sctp such as sctp_generate_t3_rtx_event(), sctp_generate_probe_event(), sctp_generate_t1_init_event(), sctp_generate_timeout_event(), sctp_generate_t3_rtx_event() and so on.

The root cause is sctp_sched_prio_init_sid() with GFP_KERNEL parameter that may sleep could be called by different timer handlers which is in interrupt context.

One of the call paths that could trigger bug is shown below:

(interrupt context)
sctp_generate_probe_event
sctp_do_sm
sctp_side_effects
sctp_cmd_interpreter
sctp_outq_teardown
sctp_outq_init
sctp_sched_set_sched
n->init_sid(..,GFP_KERNEL)
sctp_sched_prio_init_sid //may sleep

This patch changes gfp_t parameter of init_sid in sctp_sched_set_sched() from GFP_KERNEL to GFP_ATOMIC in order to prevent sleep in atomic context bugs.

---
 net/sctp/stream_sched.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 99e5f69fbb74..a2e1d34f52c5 100644
@@ -163,7 +163,7 @@ int sctp_sched_set_sched(struct sctp_association *asoc,
 		if (!SCTP_SO(&asoc->stream, i)->ext)
 			continue;
 
-		ret = n->init_sid(&asoc->stream, i, GFP_KERNEL);
+		ret = n->init_sid(&asoc->stream, i, GFP_ATOMIC);
 		if (ret)
 			goto err;
 	}

2.35.1

From: Florian Westphal <[email protected]>

[ Upstream commit 99a63d36cb3ed5ca3aa6fcb64cffbeaf3b0fb164 ]

Domingo Dirutigliano and Nicola Guerrera report kernel panic when sending nf_queue verdict with 1-byte nfta_payload attribute.

The IP/IPv6 stack pulls the IP(v6) header from the packet after the input hook.

If user truncates the packet below the header size, this skb_pull() will result in a malformed skb (skb->len < 0).

---
 net/netfilter/nfnetlink_queue.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

index 7d3ab08a5a2d..581bd1353a44 100644
@@ -846,11 +846,16 @@ nfqnl_enqueue_packet(struct nf_queue_entry *entry, unsigned int queuenum)
 }
 
 static int
-nfqnl_mangle(void *data, int data_len, struct nf_queue_entry *e, int diff)
+nfqnl_mangle(void *data, unsigned int data_len, struct nf_queue_entry *e, int diff)
 {
 	struct sk_buff *nskb;
 
 	if (diff < 0) {
+		unsigned int min_len = skb_transport_offset(e->skb);
+
+		if (data_len < min_len)
+			return -EINVAL;
+
 		if (pskb_trim(e->skb, data_len))
 			return -ENOMEM;
 	} else if (diff > 0) {

2.35.1

From: Jason Wang <[email protected]>

[ Upstream commit 5a159128faff151b7fe5f4eb0f310b1e0a2d56bf ]

We try using cancel_delayed_work_sync() to prevent the work from enabling NAPI. This is insufficient since we don't disable the source of the refill work scheduling. This means an NAPI poll callback after cancel_delayed_work_sync() can schedule the refill work then can re-enable the NAPI that leads to use-after-free [1].

Since the work can enable NAPI, we can't simply disable NAPI before calling cancel_delayed_work_sync(). So fix this by introducing a dedicated boolean to control whether or not the work could be scheduled from NAPI.

[1]
==================================================================

BUG: KASAN: use-after-free in refill_work+0x43/0xd4
Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42

CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ #480
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: events refill_work
Call Trace:
 <TASK>
 dump_stack_lvl+0x34/0x44
 print_report.cold+0xbb/0x6ac
 ? _printk+0xad/0xde
 ? refill_work+0x43/0xd4
 kasan_report+0xa8/0x130
 ? refill_work+0x43/0xd4
 refill_work+0x43/0xd4
 process_one_work+0x43d/0x780
 worker_thread+0x2a0/0x6f0
 ? process_one_work+0x780/0x780
 kthread+0x167/0x1a0
 ? kthread_exit+0x50/0x50
 ret_from_fork+0x22/0x30
 </TASK>

...

---
 drivers/net/virtio_net.c | 37 ++++++++++++++++++++++++++++++++++---
 1 file changed, 34 insertions(+), 3 deletions(-)

index e14842fbe3d6..579df7c5411d 100644
@@ -213,9 +213,15 @@ struct virtnet_info {
 	/* Packet virtio header size */
 	u8 hdr_len;
 
-	/* Work struct for refilling if we run low on memory. */
+	/* Work struct for delayed refilling if we run low on memory. */
 	struct delayed_work refill;
 
+	/* Is delayed refill enabled? */
+	bool refill_enabled;
+
+	/* The lock to synchronize the access to refill_enabled */
+	spinlock_t refill_lock;
+
 	/* Work struct for config space updates */
 	struct work_struct config_work;
 

@@ -319,6 +325,20 @@ static struct page *get_a_page(struct receive_queue *rq, gfp_t gfp_mask)
 	return p;
 }
 
+static void enable_delayed_refill(struct virtnet_info *vi)
+{
+	spin_lock_bh(&vi->refill_lock);
+	vi->refill_enabled = true;
+	spin_unlock_bh(&vi->refill_lock);
+}
+
+static void disable_delayed_refill(struct virtnet_info *vi)
+{
+	spin_lock_bh(&vi->refill_lock);
+	vi->refill_enabled = false;
+	spin_unlock_bh(&vi->refill_lock);
+}
+
 static void virtqueue_napi_schedule(struct napi_struct *napi,
 				    struct virtqueue *vq)
 {

@@ -1388,8 +1408,12 @@ static int virtnet_receive(struct receive_queue *rq, int budget,
 	}
 
 	if (rq->vq->num_free > min((unsigned int)budget, virtqueue_get_vring_size(rq->vq)) / 2) {
-		if (!try_fill_recv(vi, rq, GFP_ATOMIC))
-			schedule_delayed_work(&vi->refill, 0);
+		if (!try_fill_recv(vi, rq, GFP_ATOMIC)) {
+			spin_lock(&vi->refill_lock);
+			if (vi->refill_enabled)
+				schedule_delayed_work(&vi->refill, 0);
+			spin_unlock(&vi->refill_lock);
+		}
 	}
 
 	u64_stats_update_begin(&rq->stats.syncp);

@@ -1508,6 +1532,8 @@ static int virtnet_open(struct net_device *dev)
 	struct virtnet_info *vi = netdev_priv(dev);
 	int i, err;
 
+	enable_delayed_refill(vi);
+
 	for (i = 0; i < vi->max_queue_pairs; i++) {
 		if (i < vi->curr_queue_pairs)
 			/* Make sure we have some buffers: if oom use wq. */

@@ -1878,6 +1904,8 @@ static int virtnet_close(struct net_device *dev)
 	struct virtnet_info *vi = netdev_priv(dev);
 	int i;
 
+	/* Make sure NAPI doesn't schedule refill work */
+	disable_delayed_refill(vi);
 	/* Make sure refill_work doesn't re-enable napi! */
 	cancel_delayed_work_sync(&vi->refill);
 

@@ -2417,6 +2445,8 @@ static int virtnet_restore_up(struct virtio_device *vdev)
 
 	virtio_device_ready(vdev);
 
+	enable_delayed_refill(vi);
+
 	if (netif_running(vi->dev)) {
 		err = virtnet_open(vi->dev);
 		if (err)

@@ -3140,6 +3170,7 @@ static int virtnet_probe(struct virtio_device *vdev)
 	vdev->priv = vi;
 
 	INIT_WORK(&vi->config_work, virtnet_config_changed_work);
+	spin_lock_init(&vi->refill_lock);
 
 	/* If we can receive ANY GSO packets, we must allocate large ones. */
 	if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||

2.35.1

From: Leo Yan <[email protected]>

[ Upstream commit 2d86612aacb7805f72873691a2644d7279ed0630 ]

When using 'perf mem' and 'perf c2c', an issue is observed that tool reports the wrong offset for global data symbols. This is a common issue on both x86 and Arm64 platforms.

Let's see an example, for a test program, below is the disassembly for its .bss section which is dumped with objdump:

...

Disassembly of section .bss:

0000000000004040 <completed.0>:
...

0000000000004080 <buf1>:
...

00000000000040c0 <buf2>:
...

0000000000004100 <thread>:
...

First we used 'perf mem record' to run the test program and then used 'perf --debug verbose=4 mem report' to observe what's the symbol info for 'buf1' and 'buf2' structures.

  # ./perf mem record -e ldlat-loads,ldlat-stores -- false_sharing.exe 8
  # ./perf --debug verbose=4 mem report
    ...
    dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 sh_addr: 0x4040 sh_offset: 0x3028
    symbol__new: buf2 0x30a8-0x30e8
    ...
    dso__load_sym_internal: adjusting symbol: st_value: 0x4080 sh_addr: 0x4040 sh_offset: 0x3028
    symbol__new: buf1 0x3068-0x30a8
    ...

The perf tool relies on libelf to parse symbols, in executable and shared object files, 'st_value' holds a virtual address; 'sh_addr' is the address at which section's first byte should reside in memory, and 'sh_offset' is the byte offset from the beginning of the file to the first byte in the section. The perf tool uses below formula to convert a symbol's memory address to a file address:

file_address = st_value - sh_addr + sh_offset
^
` Memory address

We can see the final adjusted address ranges for buf1 and buf2 are [0x30a8-0x30e8) and [0x3068-0x30a8) respectively, apparently this is incorrect, in the code, the structure for 'buf1' and 'buf2' specifies compiler attribute with 64-byte alignment.

The problem happens for 'sh_offset', libelf returns it as 0x3028 which is not 64-byte aligned, combining with disassembly, it's likely libelf doesn't respect the alignment for .bss section, therefore, it doesn't return the aligned value for 'sh_offset'.

Suggested by Fangrui Song, ELF file contains program header which contains PT_LOAD segments, the fields p_vaddr and p_offset in PT_LOAD segments contain the execution info. A better choice for converting memory address to file address is using the formula:

file_address = st_value - p_vaddr + p_offset

This patch introduces elf_read_program_header() which returns the program header based on the passed 'st_value', then it uses the formula above to calculate the symbol file address; and the debugging log is updated respectively.

After applying the change:

  # ./perf --debug verbose=4 mem report
    ...
    dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 p_vaddr: 0x3d28 p_offset: 0x2d28
    symbol__new: buf2 0x30c0-0x3100
    ...
    dso__load_sym_internal: adjusting symbol: st_value: 0x4080 p_vaddr: 0x3d28 p_offset: 0x2d28
    symbol__new: buf1 0x3080-0x30c0
    ...

---
 tools/perf/util/symbol-elf.c | 45 ++++++++++++++++++++++++++++++++----
 1 file changed, 41 insertions(+), 4 deletions(-)

index 2ec0a32da579..0b185b1090ff 100644
@@ -230,6 +230,33 @@ Elf_Scn *elf_section_by_name(Elf *elf, GElf_Ehdr *ep,
 	return NULL;
 }
 
+static int elf_read_program_header(Elf *elf, u64 vaddr, GElf_Phdr *phdr)
+{
+	size_t i, phdrnum;
+	u64 sz;
+
+	if (elf_getphdrnum(elf, &phdrnum))
+		return -1;
+
+	for (i = 0; i < phdrnum; i++) {
+		if (gelf_getphdr(elf, i, phdr) == NULL)
+			return -1;
+
+		if (phdr->p_type != PT_LOAD)
+			continue;
+
+		sz = max(phdr->p_memsz, phdr->p_filesz);
+		if (!sz)
+			continue;
+
+		if (vaddr >= phdr->p_vaddr && (vaddr < phdr->p_vaddr + sz))
+			return 0;
+	}
+
+	/* Not found any valid program header */
+	return -1;
+}
+
 static bool want_demangle(bool is_kernel_sym)
 {
 	return is_kernel_sym ? symbol_conf.demangle_kernel : symbol_conf.demangle;

@@ -1091,6 +1118,7 @@ int dso__load_sym(struct dso *dso, struct map *map, struct symsrc *syms_ss,
 					sym.st_value);
 			used_opd = true;
 		}
+
 		/*
 		 * When loading symbols in a data mapping, ABS symbols (which
 		 * has a value of SHN_ABS in its st_shndx) failed at

@@ -1127,11 +1155,20 @@ int dso__load_sym(struct dso *dso, struct map *map, struct symsrc *syms_ss,
 				goto out_elf_end;
 		} else if ((used_opd && runtime_ss->adjust_symbols) ||
 			   (!used_opd && syms_ss->adjust_symbols)) {
+			GElf_Phdr phdr;
+
+			if (elf_read_program_header(syms_ss->elf,
+						    (u64)sym.st_value, &phdr)) {
+				pr_warning("%s: failed to find program header for "
+					   "symbol: %s st_value: %#" PRIx64 "\n",
+					   __func__, elf_name, (u64)sym.st_value);
+				continue;
+			}
 			pr_debug4("%s: adjusting symbol: st_value: %#" PRIx64 " "
-				  "sh_addr: %#" PRIx64 " sh_offset: %#" PRIx64 "\n", __func__,
-				  (u64)sym.st_value, (u64)shdr.sh_addr,
-				  (u64)shdr.sh_offset);
-			sym.st_value -= shdr.sh_addr - shdr.sh_offset;
+				  "p_vaddr: %#" PRIx64 " p_offset: %#" PRIx64 "\n",
+				  __func__, (u64)sym.st_value, (u64)phdr.p_vaddr,
+				  (u64)phdr.p_offset);
+			sym.st_value -= phdr.p_vaddr - phdr.p_offset;
 		}
 
 		demangled = demangle_sym(dso, kmodule, elf_name);

2.35.1

From: Alejandro Lucero <[email protected]>

[ Upstream commit 67c3b611d92fc238c43734878bc3e232ab570c79 ]

Sending a PTP packet can imply to use the normal TX driver datapath but invoked from the driver's ptp worker. The kernel generic TX code disables softirqs and preemption before calling specific driver TX code, but the ptp worker does not. Although current ptp driver functionality does not require it, there are several reasons for doing so:

1) The invoked code is always executed with softirqs disabled for non PTP packets.
2) Better if a ptp packet transmission is not interrupted by softirq handling which could lead to high latencies.
3) netdev_xmit_more used by the TX code requires preemption to be disabled.

Indeed a solution for dealing with kernel preemption state based on static kernel configuration is not possible since the introduction of dynamic preemption level configuration at boot time using the static calls functionality.

---
 drivers/net/ethernet/sfc/ptp.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

index 1fa1b71dbfa1..ed1140ecca60 100644
@@ -1093,7 +1093,29 @@ static void efx_ptp_xmit_skb_queue(struct efx_nic *efx, struct sk_buff *skb)
 
 	tx_queue = &ptp_data->channel->tx_queue[type];
 	if (tx_queue && tx_queue->timestamping) {
+		/* This code invokes normal driver TX code which is always
+		 * protected from softirqs when called from generic TX code,
+		 * which in turn disables preemption. Look at __dev_queue_xmit
+		 * which uses rcu_read_lock_bh disabling preemption for RCU
+		 * plus disabling softirqs. We do not need RCU reader
+		 * protection here.
+		 *
+		 * Although it is theoretically safe for current PTP TX/RX code
+		 * running without disabling softirqs, there are three good
+		 * reasond for doing so:
+		 *
+		 *      1) The code invoked is mainly implemented for non-PTP
+		 *         packets and it is always executed with softirqs
+		 *         disabled.
+		 *      2) This being a single PTP packet, better to not
+		 *         interrupt its processing by softirqs which can lead
+		 *         to high latencies.
+		 *      3) netdev_xmit_more checks preemption is disabled and
+		 *         triggers a BUG_ON if not.
+		 */
+		local_bh_disable();
 		efx_enqueue_skb(tx_queue, skb);
+		local_bh_enable();
 	} else {
 		WARN_ONCE(1, "PTP channel has no timestamped tx queue\n");
 		dev_kfree_skb_any(skb);

2.35.1

From: Xin Long <[email protected]>

[ Upstream commit 181d8d2066c000ba0a0e6940a7ad80f1a0e68e9d ]

A NULL pointer dereference was reported by Wei Chen:

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  RIP: 0010:__list_del_entry_valid+0x26/0x80
  Call Trace:
   <TASK>
   sctp_sched_dequeue_common+0x1c/0x90
   sctp_sched_prio_dequeue+0x67/0x80
   __sctp_outq_teardown+0x299/0x380
   sctp_outq_free+0x15/0x20
   sctp_association_free+0xc3/0x440
   sctp_do_sm+0x1ca7/0x2210
   sctp_assoc_bh_rcv+0x1f6/0x340

This happens when calling sctp_sendmsg without connecting to server first. In this case, a data chunk already queues up in send queue of client side when processing the INIT_ACK from server in sctp_process_init() where it calls sctp_stream_init() to alloc stream_in. If it fails to alloc stream_in all stream_out will be freed in sctp_stream_init's err path. Then in the asoc freeing it will crash when dequeuing this data chunk as stream_out is missing.

As we can't free stream out before dequeuing all data from send queue, and this patch is to fix it by moving the err path stream_out/in freeing in sctp_stream_init() to sctp_stream_free() which is eventually called when freeing the asoc in sctp_association_free(). This fix also makes the code in sctp_process_init() more clear.

Note that in sctp_association_init() when it fails in sctp_stream_init(), sctp_association_free() will not be called, and in that case it should go to 'stream_free' err path to free stream instead of 'fail_init'.

---
 net/sctp/associola.c |  5 ++---
 net/sctp/stream.c    | 19 +++----------------
 2 files changed, 5 insertions(+), 19 deletions(-)

index fb6f62264e87..f960b0e1e552 100644
@@ -224,9 +224,8 @@ static struct sctp_association *sctp_association_init(
 	if (!sctp_ulpq_init(&asoc->ulpq, asoc))
 		goto fail_init;
 
-	if (sctp_stream_init(&asoc->stream, asoc->c.sinit_num_ostreams,
-			     0, gfp))
-		goto fail_init;
+	if (sctp_stream_init(&asoc->stream, asoc->c.sinit_num_ostreams, 0, gfp))
+		goto stream_free;
 
 	/* Initialize default path MTU. */
 	asoc->pathmtu = sp->pathmtu;

index cd20638b6151..56762745d6e4 100644
@@ -137,7 +137,7 @@ int sctp_stream_init(struct sctp_stream *stream, __u16 outcnt, __u16 incnt,
 
 	ret = sctp_stream_alloc_out(stream, outcnt, gfp);
 	if (ret)
-		goto out_err;
+		return ret;
 
 	for (i = 0; i < stream->outcnt; i++)
 		SCTP_SO(stream, i)->state = SCTP_STREAM_OPEN;

@@ -145,22 +145,9 @@ int sctp_stream_init(struct sctp_stream *stream, __u16 outcnt, __u16 incnt,
 handle_in:
 	sctp_stream_interleave_init(stream);
 	if (!incnt)
-		goto out;
-
-	ret = sctp_stream_alloc_in(stream, incnt, gfp);
-	if (ret)
-		goto in_err;
-
-	goto out;
+		return 0;
 
-in_err:
-	sched->free(stream);
-	genradix_free(&stream->in);
-out_err:
-	genradix_free(&stream->out);
-	stream->outcnt = 0;
-out:
-	return ret;
+	return sctp_stream_alloc_in(stream, incnt, gfp);
 }
 
 int sctp_stream_init_ext(struct sctp_stream *stream, __u16 sid)

2.35.1

From: Greg Kroah-Hartman <[email protected]>

The gcc build warning prevents all clang-built kernels from working properly, so comment it out to fix the build.

This is a -stable kernel only patch for now, it will be resolved differently in mainline releases in the future.

---
 arch/arm/lib/xor-neon.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -26,8 +26,9 @@ MODULE_LICENSE("GPL");
  * While older versions of GCC do not generate incorrect code, they fail to
  * recognize the parallel nature of these functions, and emit plain ARM code,
  * which is known to be slower than the optimized ARM code in asm-arm/xor.h.
+ *
+ * #warning This code requires at least version 4.6 of GCC
  */
-#warning This code requires at least version 4.6 of GCC
 #endif
 
 #pragma GCC diagnostic ignored "-Wunused-variable"

From: Wei Mingzhi <[email protected]>

commit 829eea7c94e0bac804e65975639a2f2e5f147033 upstream.

USB device ID of some versions of XiaoDu WiFi Dongle is 2955:1003 instead of 2955:1001. Both are the same mt7601u hardware.

---
 drivers/net/wireless/mediatek/mt7601u/usb.c |    1 +
 1 file changed, 1 insertion(+)

@@ -26,6 +26,7 @@ static const struct usb_device_id mt7601
 	{ USB_DEVICE(0x2717, 0x4106) },
 	{ USB_DEVICE(0x2955, 0x0001) },
 	{ USB_DEVICE(0x2955, 0x1001) },
+	{ USB_DEVICE(0x2955, 0x1003) },
 	{ USB_DEVICE(0x2a5f, 0x1000) },
 	{ USB_DEVICE(0x7392, 0x7710) },
 	{ 0, }

From: Ming Lei <[email protected]>

commit 673235f915318ced5d7ec4b2bfd8cb909e6a4a55 upstream.

When queuing I/O request to LLD, STS_RESOURCE may be returned because:

- Host is in recovery or blocked

- Target queue throttling or target is blocked

- LLD rejection

In these scenarios BLK_STS_DEV_RESOURCE is returned to the block layer to avoid an unnecessary re-run of the queue. However, all of the requests queued to this SCSI device may complete immediately after reading 'sdev->device_busy' and BLK_STS_DEV_RESOURCE is returned to block layer. In that case the current I/O won't get a chance to get queued since it is invisible at that time for both scsi_run_queue_async() and blk-mq's RESTART.

Fix the issue by not returning BLK_STS_DEV_RESOURCE in this situation.

---
 drivers/scsi/scsi_lib.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

@@ -1719,8 +1719,7 @@ out_put_budget:
 	case BLK_STS_OK:
 		break;
 	case BLK_STS_RESOURCE:
-		if (atomic_read(&sdev->device_busy) ||
-		    scsi_device_blocked(sdev))
+		if (scsi_device_blocked(sdev))
 			ret = BLK_STS_DEV_RESOURCE;
 		break;
 	default:

All tests passing for Tegra ...

Test results for stable-v5.4:

    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    59 tests:	59 pass, 0 fail

Linux version: 5.4.209-rc1-gb48a8f43dce6
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Jon

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:

Florian

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Hello!

Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 5.4.209-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.4.y
* git commit: b48a8f43dce6a15f83f416453361b45905c1b88b
* git describe: v5.4.207-123-gb48a8f43dce6
* test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.207-123-gb48a8f43dce6

## No test regressions (compared to v5.4.208)

## No metric regressions (compared to v5.4.208)

## No test fixes (compared to v5.4.208)

## No metric fixes (compared to v5.4.208)

## Test result summary
total: 107690, pass: 94251, fail: 487, skip: 11696, xfail: 1256

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 307 total, 307 passed, 0 failed
* arm64: 61 total, 57 passed, 4 failed
* i386: 28 total, 26 passed, 2 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 54 total, 54 passed, 0 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 54 total, 52 passed, 2 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* rcutorture
* ssuite
* v4l2-compliance
* vdso

Greetings!

Daniel Díaz
[email protected]

Linaro LKFT
https://lkft.linaro.org

Build results:

	total: 161 pass: 161 fail: 0
Qemu test results:
	total: 449 pass: 449 fail: 0

Guenter

Hi Greg,

Build test (gcc version 11.3.1 20220724):
mips: 65 configs -> no failure
arm: 106 configs -> no failure
arm64: 2 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/1602

--
Regards
Sudip