drm/simpledrm: Various improvements
Subsystems (2)
Thomas Zimmermann
maintainerv3 cover drm/simpledrm: Various improvements
Patchset contains various improvements for simpledrm that were implemented in preparation of adding another firmware graphics driver. [1] Javier and Geert already reviewed the changes and it was agreed that they could be merged independently.
We start with v3, as that's were we branch of the original patches.
v3:
* branch from ofdrm patches
* fix stride calculation
* fix usage of drm_atomic_helper_check_plane_state()
* remove empty CRTC atomic_{enable,disable}
[1] https://patchwork.freedesktop.org/series/106538/
Thomas Zimmermann (5):
drm/simpledrm: Remove mem field from device structure drm/simpledrm: Inline device-init helpers drm/simpledrm: Remove pdev field from device structure drm/simpledrm: Compute framebuffer stride if not set drm/simpledrm: Convert to atomic helpers
drivers/gpu/drm/tiny/simpledrm.c | 559 ++++++++++++++++--------------- 1 file changed, 293 insertions(+), 266 deletions(-)
base-commit: 06ec37c2c220f7213b91af6148dbd5d772a171b1
Signature · 1 line
2.37.1
Thomas Zimmermann
maintainerPATCH v3 1/5 drm/simpledrm: Remove mem field from device structure
Remove the unused mem field from struct simpledrm_device.
--- drivers/gpu/drm/tiny/simpledrm.c | 2 -- 1 file changed, 2 deletions(-)
drivers/gpu/drm/tiny/simpledrm.c +0 -2
@@ -217,7 +217,6 @@ struct simpledrm_device {unsigned int pitch;/* memory management */ -struct resource *mem;void __iomem *screen_base;/* modesetting */
@@ -558,7 +557,6 @@ static int simpledrm_device_init_mm(struct simpledrm_device *sdev)if (!screen_base)return -ENOMEM ; - sdev->mem = mem; sdev->screen_base = screen_base;return 0 ;
Signature · 1 line
2.37.1
Thomas Zimmermann
maintainerPATCH v3 2/5 drm/simpledrm: Inline device-init helpers
In reply to Thomas ZimmermannInline the helpers for initializing the hardware FB, the memory management and the modesetting into the device-creation function. No functional changes.
In the original code, init helpers depended on values from other init helpers. Inlining the functions ensures that steps are taken in the correct order. It's also easier to see what happens. The device is simple enough to be set up in one function. Only clocks and regulators are still set up in their own helpers, as their presence is system dependent.
--- drivers/gpu/drm/tiny/simpledrm.c | 291 ++++++++++++++----------------- 1 file changed, 128 insertions(+), 163 deletions(-)
drivers/gpu/drm/tiny/simpledrm.c +128 -163
@@ -449,119 +449,6 @@ static int simpledrm_device_init_regulators(struct simpledrm_device *sdev) }#endif -/* -* Simplefb settings -*/ - -static struct drm_display_mode simpledrm_mode (unsigned int width, -unsigned int height) -{ -struct drm_display_mode mode = {SIMPLEDRM_MODE (width, height) }; - - mode.clock = mode.hdisplay * mode.vdisplay *60 /1000 /* kHz */ ; -drm_mode_set_name (&mode); - -return mode; -} - -static int simpledrm_device_init_fb (struct simpledrm_device *sdev) -{ -int width, height, stride; -const struct drm_format_info *format; -struct drm_device *dev = &sdev->dev; -struct platform_device *pdev = sdev->pdev; -const struct simplefb_platform_data *pd =dev_get_platdata (&pdev->dev); -struct device_node *of_node = pdev->dev.of_node; - -if (pd) { - width =simplefb_get_width_pd (dev, pd); -if (width <0 ) -return width; - height =simplefb_get_height_pd (dev, pd); -if (height <0 ) -return height; - stride =simplefb_get_stride_pd (dev, pd); -if (stride <0 ) -return stride; - format =simplefb_get_format_pd (dev, pd); -if (IS_ERR (format)) -return PTR_ERR (format); - }else if (of_node) { - width =simplefb_get_width_of (dev, of_node); -if (width <0 ) -return width; - height =simplefb_get_height_of (dev, of_node); -if (height <0 ) -return height; - stride =simplefb_get_stride_of (dev, of_node); -if (stride <0 ) -return stride; - format =simplefb_get_format_of (dev, of_node); -if (IS_ERR (format)) -return PTR_ERR (format); - }else { -drm_err (dev,"no simplefb configuration found\n" ); -return -ENODEV ; - } - - sdev->mode =simpledrm_mode (width, height); - sdev->format = format; - sdev->pitch = stride; - -drm_dbg_kms (dev,"display mode={" DRM_MODE_FMT "}\n" , -DRM_MODE_ARG (&sdev->mode)); -drm_dbg_kms (dev, -"framebuffer format=%p4cc, size=%dx%d, stride=%d byte\n" , - &format->format, width, height, stride); - -return 0 ; -} - -/* -* Memory management -*/ - -static int simpledrm_device_init_mm (struct simpledrm_device *sdev) -{ -struct drm_device *dev = &sdev->dev; -struct platform_device *pdev = sdev->pdev; -struct resource *res, *mem; -void __iomem *screen_base; -int ret; - - res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); -if (!res) -return -EINVAL ; - - ret =devm_aperture_acquire_from_firmware (dev, res->start,resource_size (res)); -if (ret) { -drm_err (dev,"could not acquire memory range %pr: error %d\n" , - res, ret); -return ret; - } - - mem =devm_request_mem_region (&pdev->dev, res->start,resource_size (res), - sdev->dev.driver->name); -if (!mem) { -/* -* We cannot make this fatal. Sometimes this comes from magic -* spaces our resource handlers simply don't know about. Use -* the I/O-memory resource as-is and try to map that instead. -*/ -drm_warn (dev,"could not acquire memory region %pr\n" , res); - mem = res; - } - - screen_base =devm_ioremap_wc (&pdev->dev, mem->start, -resource_size (mem)); -if (!screen_base) -return -ENOMEM ; - - sdev->screen_base = screen_base; - -return 0 ; -} -/* * Modesetting */
@@ -738,6 +625,21 @@ static const struct drm_mode_config_funcs simpledrm_mode_config_funcs = { .atomic_commit = drm_atomic_helper_commit, }; +/* +* Init / Cleanup +*/ + +static struct drm_display_mode simpledrm_mode (unsigned int width, +unsigned int height) +{ +struct drm_display_mode mode = {SIMPLEDRM_MODE (width, height) }; + + mode.clock = mode.hdisplay * mode.vdisplay *60 /1000 /* kHz */ ; +drm_mode_set_name (&mode); + +return mode; +} +static const uint32_t *simpledrm_device_formats (struct simpledrm_device *sdev,size_t *nformats_out) {
@@ -777,88 +679,151 @@ static const uint32_t *simpledrm_device_formats(struct simpledrm_device *sdev,return sdev->formats; } -static int simpledrm_device_init_modeset (struct simpledrm_device *sdev) +static struct simpledrm_device *simpledrm_device_create (struct drm_driver *drv, +struct platform_device *pdev) { -struct drm_device *dev = &sdev->dev; -struct drm_display_mode *mode = &sdev->mode; -struct drm_connector *connector = &sdev->connector; -struct drm_simple_display_pipe *pipe = &sdev->pipe; +const struct simplefb_platform_data *pd =dev_get_platdata (&pdev->dev); +struct device_node *of_node = pdev->dev.of_node; +struct simpledrm_device *sdev; +struct drm_device *dev; +int width, height, stride; +const struct drm_format_info *format; +struct resource *res, *mem; +void __iomem *screen_base; +struct drm_connector *connector; +struct drm_simple_display_pipe *pipe;unsigned long max_width, max_height;const uint32_t *formats;size_t nformats;int ret; + sdev = devm_drm_dev_alloc(&pdev->dev, drv, struct simpledrm_device, dev); +if (IS_ERR (sdev)) +return ERR_CAST (sdev); + dev = &sdev->dev; + sdev->pdev = pdev; +platform_set_drvdata (pdev, sdev); + +/* +* Hardware settings +*/ + + ret =simpledrm_device_init_clocks (sdev); +if (ret) +return ERR_PTR (ret); + ret =simpledrm_device_init_regulators (sdev); +if (ret) +return ERR_PTR (ret); + +if (pd) { + width =simplefb_get_width_pd (dev, pd); +if (width <0 ) +return ERR_PTR (width); + height =simplefb_get_height_pd (dev, pd); +if (height <0 ) +return ERR_PTR (height); + stride =simplefb_get_stride_pd (dev, pd); +if (stride <0 ) +return ERR_PTR (stride); + format =simplefb_get_format_pd (dev, pd); +if (IS_ERR (format)) +return ERR_CAST (format); + }else if (of_node) { + width =simplefb_get_width_of (dev, of_node); +if (width <0 ) +return ERR_PTR (width); + height =simplefb_get_height_of (dev, of_node); +if (height <0 ) +return ERR_PTR (height); + stride =simplefb_get_stride_of (dev, of_node); +if (stride <0 ) +return ERR_PTR (stride); + format =simplefb_get_format_of (dev, of_node); +if (IS_ERR (format)) +return ERR_CAST (format); + }else { +drm_err (dev,"no simplefb configuration found\n" ); +return ERR_PTR (-ENODEV ); + } + sdev->mode =simpledrm_mode (width, height); + sdev->format = format; + sdev->pitch = stride; + +drm_dbg (dev,"display mode={" DRM_MODE_FMT "}\n" ,DRM_MODE_ARG (&sdev->mode)); +drm_dbg (dev,"framebuffer format=%p4cc, size=%dx%d, stride=%d byte\n" , + &format->format, width, height, stride); + +/* +* Memory management +*/ + + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); +if (!res) +return ERR_PTR (-EINVAL ); + + ret =devm_aperture_acquire_from_firmware (dev, res->start,resource_size (res)); +if (ret) { +drm_err (dev,"could not acquire memory range %pr: error %d\n" , res, ret); +return ERR_PTR (ret); + } + + mem =devm_request_mem_region (&pdev->dev, res->start,resource_size (res), drv->name); +if (!mem) { +/* +* We cannot make this fatal. Sometimes this comes from magic +* spaces our resource handlers simply don't know about. Use +* the I/O-memory resource as-is and try to map that instead. +*/ +drm_warn (dev,"could not acquire memory region %pr\n" , res); + mem = res; + } + + screen_base =devm_ioremap_wc (&pdev->dev, mem->start,resource_size (mem)); +if (!screen_base) +return ERR_PTR (-ENOMEM ); + sdev->screen_base = screen_base; + +/* +* Modesetting +*/ + ret =drmm_mode_config_init (dev);if (ret) -return ret; +return ERR_PTR (ret); - max_width = max_t(unsigned long, mode->hdisplay, DRM_SHADOW_PLANE_MAX_WIDTH); - max_height = max_t(unsigned long, mode->vdisplay, DRM_SHADOW_PLANE_MAX_HEIGHT); + max_width = max_t(unsigned long, width, DRM_SHADOW_PLANE_MAX_WIDTH); + max_height = max_t(unsigned long, height, DRM_SHADOW_PLANE_MAX_HEIGHT); - dev->mode_config.min_width = mode->hdisplay; + dev->mode_config.min_width = width; dev->mode_config.max_width = max_width; - dev->mode_config.min_height = mode->vdisplay; + dev->mode_config.min_height = height; dev->mode_config.max_height = max_height; - dev->mode_config.preferred_depth = sdev->format->cpp[0 ] *8 ; + dev->mode_config.preferred_depth = format->cpp[0 ] *8 ; dev->mode_config.funcs = &simpledrm_mode_config_funcs; + connector = &sdev->connector; ret =drm_connector_init (dev, connector, &simpledrm_connector_funcs, DRM_MODE_CONNECTOR_Unknown);if (ret) -return ret; +return ERR_PTR (ret);drm_connector_helper_add (connector, &simpledrm_connector_helper_funcs);drm_connector_set_panel_orientation_with_quirk (connector,DRM_MODE_PANEL_ORIENTATION_UNKNOWN , - mode->hdisplay, mode->vdisplay); + width, height); formats =simpledrm_device_formats (sdev, &nformats); + pipe = &sdev->pipe; ret =drm_simple_display_pipe_init (dev, pipe, &simpledrm_simple_display_pipe_funcs, formats, nformats, simpledrm_format_modifiers, connector);if (ret) -return ret; +return ERR_PTR (ret);drm_plane_enable_fb_damage_clips (&pipe->plane);drm_mode_config_reset (dev); -return 0 ; -} - -/* -* Init / Cleanup -*/ - -static struct simpledrm_device * -simpledrm_device_create (struct drm_driver *drv,struct platform_device *pdev) -{ -struct simpledrm_device *sdev; -int ret; - - sdev = devm_drm_dev_alloc(&pdev->dev, drv, struct simpledrm_device, - dev); -if (IS_ERR (sdev)) -return ERR_CAST (sdev); - sdev->pdev = pdev; -platform_set_drvdata (pdev, sdev); - - ret =simpledrm_device_init_clocks (sdev); -if (ret) -return ERR_PTR (ret); - ret =simpledrm_device_init_regulators (sdev); -if (ret) -return ERR_PTR (ret); - ret =simpledrm_device_init_fb (sdev); -if (ret) -return ERR_PTR (ret); - ret =simpledrm_device_init_mm (sdev); -if (ret) -return ERR_PTR (ret); - ret =simpledrm_device_init_modeset (sdev); -if (ret) -return ERR_PTR (ret); -return sdev; }
Signature · 1 line
2.37.1
Thomas Zimmermann
maintainerPATCH v3 3/5 drm/simpledrm: Remove pdev field from device structure
In reply to Thomas ZimmermannReplace the remaining uses of the field pdev by upcasts from the Linux device and remove the field.
--- drivers/gpu/drm/tiny/simpledrm.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/gpu/drm/tiny/simpledrm.c +2 -4
@@ -198,7 +198,6 @@ simplefb_get_format_of(struct drm_device *dev, struct device_node *of_node)struct simpledrm_device {struct drm_device dev; -struct platform_device *pdev;/* clocks */ #if definedCONFIG_OF && definedCONFIG_COMMON_CLK
@@ -271,7 +270,7 @@ static void simpledrm_device_release_clocks(void *res)static int simpledrm_device_init_clocks (struct simpledrm_device *sdev) {struct drm_device *dev = &sdev->dev; -struct platform_device *pdev = sdev->pdev; +struct platform_device *pdev =to_platform_device (dev->dev);struct device_node *of_node = pdev->dev.of_node;struct clk *clock;unsigned int i;
@@ -369,7 +368,7 @@ static void simpledrm_device_release_regulators(void *res)static int simpledrm_device_init_regulators (struct simpledrm_device *sdev) {struct drm_device *dev = &sdev->dev; -struct platform_device *pdev = sdev->pdev; +struct platform_device *pdev =to_platform_device (dev->dev);struct device_node *of_node = pdev->dev.of_node;struct property *prop;struct regulator *regulator;
@@ -701,7 +700,6 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv,if (IS_ERR (sdev))return ERR_CAST (sdev); dev = &sdev->dev; - sdev->pdev = pdev;platform_set_drvdata (pdev, sdev);/*
Signature · 1 line
2.37.1
Thomas Zimmermann
maintainerPATCH v3 4/5 drm/simpledrm: Compute framebuffer stride if not set
In reply to Thomas ZimmermannCompute the framebuffer's scanline stride length if not given by the simplefb data.
v3:
* get pixel size from drm_format_info_bpp() (Geert, Javier)
--- drivers/gpu/drm/tiny/simpledrm.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/tiny/simpledrm.c +3 -0
@@ -743,6 +743,9 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv,drm_err (dev,"no simplefb configuration found\n" );return ERR_PTR (-ENODEV ); } +if (!stride) + stride =DIV_ROUND_UP (drm_format_info_bpp (format,0 ) * width,8 ); + sdev->mode =simpledrm_mode (width, height); sdev->format = format; sdev->pitch = stride;
Signature · 1 line
2.37.1
Thomas Zimmermann
maintainerPATCH v3 5/5 drm/simpledrm: Convert to atomic helpers
In reply to Thomas ZimmermannReplace the simple-KMS helpers with the regular atomic helpers. The regular helpers are better architectured and therefore allow for easier code sharing among drivers. No functional changes.
v3:
* remove empty CRTC helpers atomic_{enable, disable} (Javier)
* unconditionally run drm_atomic_helper_check_plane_state()
--- drivers/gpu/drm/tiny/simpledrm.c | 273 +++++++++++++++++++------------ 1 file changed, 168 insertions(+), 105 deletions(-)
drivers/gpu/drm/tiny/simpledrm.c +168 -105
@@ -8,6 +8,7 @@#include <linux/regulator/consumer.h> #include <drm/drm_aperture.h> +#include <drm/drm_atomic.h> #include <drm/drm_atomic_state_helper.h> #include <drm/drm_connector.h> #include <drm/drm_damage_helper.h>
@@ -20,8 +21,8 @@#include <drm/drm_gem_shmem_helper.h> #include <drm/drm_managed.h> #include <drm/drm_modeset_helper_vtables.h> +#include <drm/drm_plane_helper.h> #include <drm/drm_probe_helper.h> -#include <drm/drm_simple_kms_helper.h> #define DRIVER_NAME "simpledrm"#define DRIVER_DESC "DRM driver for simple-framebuffer platform devices"
@@ -221,8 +222,10 @@ struct simpledrm_device {/* modesetting */ uint32_t formats[8 ];size_t nformats; +struct drm_plane primary_plane; +struct drm_crtc crtc; +struct drm_encoder encoder;struct drm_connector connector; -struct drm_simple_display_pipe pipe; };static struct simpledrm_device *simpledrm_device_of_dev (struct drm_device *dev)
@@ -460,7 +463,7 @@ static int simpledrm_device_init_regulators(struct simpledrm_device *sdev)* TODO: Add blit helpers for remaining formats and uncomment * constants. */ -static const uint32_t simpledrm_default_formats[] = { +static const uint32_t simpledrm_primary_plane_formats[] = {DRM_FORMAT_XRGB8888 ,DRM_FORMAT_ARGB8888 ,DRM_FORMAT_RGB565 ,
@@ -471,73 +474,44 @@ static const uint32_t simpledrm_default_formats[] = { DRM_FORMAT_ARGB2101010, }; -static const uint64_t simpledrm_format_modifiers[] = { +static const uint64_t simpledrm_primary_plane_format_modifiers[] = {DRM_FORMAT_MOD_LINEAR ,DRM_FORMAT_MOD_INVALID }; -static int simpledrm_connector_helper_get_modes (struct drm_connector *connector) +static int simpledrm_primary_plane_helper_atomic_check (struct drm_plane *plane, +struct drm_atomic_state *new_state) { -struct simpledrm_device *sdev =simpledrm_device_of_dev (connector->dev); -struct drm_display_mode *mode; - - mode =drm_mode_duplicate (connector->dev, &sdev->mode); -if (!mode) -return 0 ; - -if (mode->name[0 ] =='\0' ) -drm_mode_set_name (mode); - - mode->type |=DRM_MODE_TYPE_PREFERRED ; -drm_mode_probed_add (connector, mode); - -if (mode->width_mm) - connector->display_info.width_mm = mode->width_mm; -if (mode->height_mm) - connector->display_info.height_mm = mode->height_mm; - -return 1 ; -} - -static const struct drm_connector_helper_funcs simpledrm_connector_helper_funcs = { - .get_modes = simpledrm_connector_helper_get_modes, -}; - -static const struct drm_connector_funcs simpledrm_connector_funcs = { - .reset = drm_atomic_helper_connector_reset, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = drm_connector_cleanup, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; +struct drm_plane_state *new_plane_state =drm_atomic_get_new_plane_state (new_state, plane); +struct drm_crtc *new_crtc = new_plane_state->crtc; +struct drm_crtc_state *new_crtc_state =NULL ; +int ret; -static enum drm_mode_status -simpledrm_simple_display_pipe_mode_valid (struct drm_simple_display_pipe *pipe, -const struct drm_display_mode *mode) -{ -struct simpledrm_device *sdev =simpledrm_device_of_dev (pipe->crtc.dev); +if (new_crtc) + new_crtc_state =drm_atomic_get_new_crtc_state (new_state, new_crtc); -if (mode->hdisplay != sdev->mode.hdisplay && - mode->vdisplay != sdev->mode.vdisplay) -return MODE_ONE_SIZE ; -else if (mode->hdisplay != sdev->mode.hdisplay) -return MODE_ONE_WIDTH ; -else if (mode->vdisplay != sdev->mode.vdisplay) -return MODE_ONE_HEIGHT ; + ret =drm_atomic_helper_check_plane_state (new_plane_state, new_crtc_state, +DRM_PLANE_NO_SCALING , +DRM_PLANE_NO_SCALING , + false, false); +if (ret) +return ret; +else if (!new_plane_state->visible) +return 0 ; -return MODE_OK ; +return 0 ; } -static void -simpledrm_simple_display_pipe_enable (struct drm_simple_display_pipe *pipe, -struct drm_crtc_state *crtc_state, -struct drm_plane_state *plane_state) +static void simpledrm_primary_plane_helper_atomic_update (struct drm_plane *plane, +struct drm_atomic_state *old_state) { -struct simpledrm_device *sdev =simpledrm_device_of_dev (pipe->crtc.dev); +struct drm_plane_state *plane_state = plane->state; +struct drm_plane_state *old_plane_state =drm_atomic_get_old_plane_state (old_state, plane);struct drm_shadow_plane_state *shadow_plane_state =to_drm_shadow_plane_state (plane_state); -struct drm_framebuffer *fb = plane_state->fb;void *vmap = shadow_plane_state->data[0 ].vaddr;/* TODO: Use mapping abstraction */ -struct drm_device *dev = &sdev->dev; +struct drm_framebuffer *fb = plane_state->fb; +struct drm_device *dev = plane->dev; +struct simpledrm_device *sdev =simpledrm_device_of_dev (dev);void __iomem *dst = sdev->screen_base;struct drm_rect src_clip, dst_clip;int idx;
@@ -545,7 +519,8 @@ simpledrm_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,if (!fb)return ; -drm_rect_fp_to_int (&src_clip, &plane_state->src); +if (!drm_atomic_helper_damage_merged (old_plane_state, plane_state, &src_clip)) +return ; dst_clip = plane_state->dst;if (!drm_rect_intersect (&dst_clip, &src_clip))
@@ -560,11 +535,11 @@ simpledrm_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,drm_dev_exit (idx); } -static void -simpledrm_simple_display_pipe_disable (struct drm_simple_display_pipe *pipe) +static void simpledrm_primary_plane_helper_atomic_disable (struct drm_plane *plane, +struct drm_atomic_state *old_state) { -struct simpledrm_device *sdev =simpledrm_device_of_dev (pipe->crtc.dev); -struct drm_device *dev = &sdev->dev; +struct drm_device *dev = plane->dev; +struct simpledrm_device *sdev =simpledrm_device_of_dev (dev);int idx;if (!drm_dev_enter (dev, &idx))
@@ -576,46 +551,105 @@ simpledrm_simple_display_pipe_disable(struct drm_simple_display_pipe *pipe)drm_dev_exit (idx); } -static void -simpledrm_simple_display_pipe_update (struct drm_simple_display_pipe *pipe, -struct drm_plane_state *old_plane_state) +static const struct drm_plane_helper_funcs simpledrm_primary_plane_helper_funcs = { +DRM_GEM_SHADOW_PLANE_HELPER_FUNCS , + .atomic_check = simpledrm_primary_plane_helper_atomic_check, + .atomic_update = simpledrm_primary_plane_helper_atomic_update, + .atomic_disable = simpledrm_primary_plane_helper_atomic_disable, +}; + +static const struct drm_plane_funcs simpledrm_primary_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, + .destroy = drm_plane_cleanup, +DRM_GEM_SHADOW_PLANE_FUNCS , +}; + +static enum drm_mode_status simpledrm_crtc_helper_mode_valid (struct drm_crtc *crtc, +const struct drm_display_mode *mode) { -struct simpledrm_device *sdev =simpledrm_device_of_dev (pipe->crtc.dev); -struct drm_plane_state *plane_state = pipe->plane.state; -struct drm_shadow_plane_state *shadow_plane_state =to_drm_shadow_plane_state (plane_state); -void *vmap = shadow_plane_state->data[0 ].vaddr;/* TODO: Use mapping abstraction */ -struct drm_framebuffer *fb = plane_state->fb; -struct drm_device *dev = &sdev->dev; -void __iomem *dst = sdev->screen_base; -struct drm_rect src_clip, dst_clip; -int idx; +struct simpledrm_device *sdev =simpledrm_device_of_dev (crtc->dev); -if (!fb) -return ; +if (mode->hdisplay != sdev->mode.hdisplay && + mode->vdisplay != sdev->mode.vdisplay) +return MODE_ONE_SIZE ; +else if (mode->hdisplay != sdev->mode.hdisplay) +return MODE_ONE_WIDTH ; +else if (mode->vdisplay != sdev->mode.vdisplay) +return MODE_ONE_HEIGHT ; -if (!drm_atomic_helper_damage_merged (old_plane_state, plane_state, &src_clip)) -return ; +return MODE_OK ; +} - dst_clip = plane_state->dst; -if (!drm_rect_intersect (&dst_clip, &src_clip)) -return ; +static int simpledrm_crtc_helper_atomic_check (struct drm_crtc *crtc, +struct drm_atomic_state *new_state) +{ +struct drm_crtc_state *new_crtc_state =drm_atomic_get_new_crtc_state (new_state, crtc); +int ret; -if (!drm_dev_enter (dev, &idx)) -return ; + ret =drm_atomic_helper_check_crtc_state (new_crtc_state, false); +if (ret) +return ret; - dst +=drm_fb_clip_offset (sdev->pitch, sdev->format, &dst_clip); -drm_fb_blit_toio (dst, sdev->pitch, sdev->format->format, vmap, fb, &src_clip); +return drm_atomic_add_affected_planes (new_state, crtc); +} -drm_dev_exit (idx); +/* +* The CRTC is always enabled. Screen updates are performed by +* the primary plane's atomic_update function. Disabling clears +* the screen in the primary plane's atomic_disable function. +*/ +static const struct drm_crtc_helper_funcs simpledrm_crtc_helper_funcs = { + .mode_valid = simpledrm_crtc_helper_mode_valid, + .atomic_check = simpledrm_crtc_helper_atomic_check, +}; + +static const struct drm_crtc_funcs simpledrm_crtc_funcs = { + .reset = drm_atomic_helper_crtc_reset, + .destroy = drm_crtc_cleanup, + .set_config = drm_atomic_helper_set_config, + .page_flip = drm_atomic_helper_page_flip, + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, +}; + +static const struct drm_encoder_funcs simpledrm_encoder_funcs = { + .destroy = drm_encoder_cleanup, +}; + +static int simpledrm_connector_helper_get_modes (struct drm_connector *connector) +{ +struct simpledrm_device *sdev =simpledrm_device_of_dev (connector->dev); +struct drm_display_mode *mode; + + mode =drm_mode_duplicate (connector->dev, &sdev->mode); +if (!mode) +return 0 ; + +if (mode->name[0 ] =='\0' ) +drm_mode_set_name (mode); + + mode->type |=DRM_MODE_TYPE_PREFERRED ; +drm_mode_probed_add (connector, mode); + +if (mode->width_mm) + connector->display_info.width_mm = mode->width_mm; +if (mode->height_mm) + connector->display_info.height_mm = mode->height_mm; + +return 1 ; } -static const struct drm_simple_display_pipe_funcs -simpledrm_simple_display_pipe_funcs = { - .mode_valid = simpledrm_simple_display_pipe_mode_valid, - .enable = simpledrm_simple_display_pipe_enable, - .disable = simpledrm_simple_display_pipe_disable, - .update = simpledrm_simple_display_pipe_update, -DRM_GEM_SIMPLE_DISPLAY_PIPE_SHADOW_PLANE_FUNCS , +static const struct drm_connector_helper_funcs simpledrm_connector_helper_funcs = { + .get_modes = simpledrm_connector_helper_get_modes, +}; + +static const struct drm_connector_funcs simpledrm_connector_funcs = { + .reset = drm_atomic_helper_connector_reset, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, };static const struct drm_mode_config_funcs simpledrm_mode_config_funcs = {
@@ -653,10 +687,10 @@ static const uint32_t *simpledrm_device_formats(struct simpledrm_device *sdev, sdev->nformats =1 ;/* default formats go second */ -for (i =0 ; i <ARRAY_SIZE (simpledrm_default_formats); ++i) { -if (simpledrm_default_formats[i] == sdev->format->format) +for (i =0 ; i <ARRAY_SIZE (simpledrm_primary_plane_formats); ++i) { +if (simpledrm_primary_plane_formats[i] == sdev->format->format)continue ;/* native format already went first */ - sdev->formats[sdev->nformats] = simpledrm_default_formats[i]; + sdev->formats[sdev->nformats] = simpledrm_primary_plane_formats[i]; sdev->nformats++; }
@@ -689,8 +723,10 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv,const struct drm_format_info *format;struct resource *res, *mem;void __iomem *screen_base; +struct drm_plane *primary_plane; +struct drm_crtc *crtc; +struct drm_encoder *encoder;struct drm_connector *connector; -struct drm_simple_display_pipe *pipe;unsigned long max_width, max_height;const uint32_t *formats;size_t nformats;
@@ -802,6 +838,40 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv, dev->mode_config.preferred_depth = format->cpp[0 ] *8 ; dev->mode_config.funcs = &simpledrm_mode_config_funcs; +/* Primary plane */ + + formats =simpledrm_device_formats (sdev, &nformats); + + primary_plane = &sdev->primary_plane; + ret =drm_universal_plane_init (dev, primary_plane,0 , &simpledrm_primary_plane_funcs, + formats, nformats, + simpledrm_primary_plane_format_modifiers, +DRM_PLANE_TYPE_PRIMARY ,NULL ); +if (ret) +return ERR_PTR (ret); +drm_plane_helper_add (primary_plane, &simpledrm_primary_plane_helper_funcs); +drm_plane_enable_fb_damage_clips (primary_plane); + +/* CRTC */ + + crtc = &sdev->crtc; + ret =drm_crtc_init_with_planes (dev, crtc, primary_plane,NULL , + &simpledrm_crtc_funcs,NULL ); +if (ret) +return ERR_PTR (ret); +drm_crtc_helper_add (crtc, &simpledrm_crtc_helper_funcs); + +/* Encoder */ + + encoder = &sdev->encoder; + ret =drm_encoder_init (dev, encoder, &simpledrm_encoder_funcs, +DRM_MODE_ENCODER_NONE ,NULL ); +if (ret) +return ERR_PTR (ret); + encoder->possible_crtcs =drm_crtc_mask (crtc); + +/* Connector */ + connector = &sdev->connector; ret =drm_connector_init (dev, connector, &simpledrm_connector_funcs, DRM_MODE_CONNECTOR_Unknown);
@@ -812,17 +882,10 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv,DRM_MODE_PANEL_ORIENTATION_UNKNOWN , width, height); - formats =simpledrm_device_formats (sdev, &nformats); - - pipe = &sdev->pipe; - ret =drm_simple_display_pipe_init (dev, pipe, &simpledrm_simple_display_pipe_funcs, - formats, nformats, simpledrm_format_modifiers, - connector); + ret =drm_connector_attach_encoder (connector, encoder);if (ret)return ERR_PTR (ret); -drm_plane_enable_fb_damage_clips (&pipe->plane); -drm_mode_config_reset (dev);return sdev;
Signature · 1 line
2.37.1